initial commit

Hopefully this is a working system

10 files changed, 1808 insertions, 0 deletions

diff --git a/source/a/bash/bash.SlackBuild b/source/a/bash/bash.SlackBuild
new file mode 100644
index 0000000..94223a8
--- /dev/null
+++ b/source/a/bash/bash.SlackBuild
@@ -0,0 +1,178 @@
+#!/bin/sh
+
+# Copyright 2005-2015  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Modified 2011, 2012  by Eric Hameleers <alien at slackware.com> for ARM port.
+
+
+# Set initial variables:
+CWD=`pwd`
+if [ "$TMP" = "" ]; then
+  TMP=/tmp
+fi
+PKG=$TMP/package-bash
+
+VERSION=${VERSION:-$(echo bash-*.tar.?z* | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1_slack14.2}
+
+# Automatically determine the architecture we're building on:
+MARCH=$( uname -m )
+if [ -z "$ARCH" ]; then
+  case "$MARCH" in
+    i?86)    export ARCH=i586 ;;
+    armv7hl) export ARCH=$MARCH ;;
+    arm*)    export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)       export ARCH=$MARCH ;;
+  esac
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mcpu=i686"
+elif [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+elif [ "$ARCH" = "armv7hl" ]; then
+  SLKCFLAGS="-O2 -march=armv7-a -mfpu=vfpv3-d16"
+else
+  SLKCFLAGS="-O2"
+fi
+
+case "$ARCH" in
+    arm*) TARGET=$ARCH-slackware-linux-gnueabi ;;
+    *)    TARGET=$ARCH-slackware-linux ;;
+esac
+
+if [ "$USE_STATIC" = "true" ]; then
+  # TODO: Why is NLS disabled?
+  CONFIG_FLAGS="\
+    --disable-nls \
+    --without-bash-malloc"
+fi
+
+if [ ! -d $TMP ]; then
+  mkdir -p $TMP # location to build the source
+fi
+rm -rf $PKG
+mkdir -p $PKG
+
+# Determine bash patchlevel:
+PATCHLEVEL="$( cd $CWD/bash-${VERSION}-patches ; /bin/ls bash4?-??? | tail -1 | cut -f 2 -d - 2> /dev/null )"
+if [ "$PATCHLEVEL" = "" ]; then
+  PATCHLEVEL=0
+fi
+
+cd $TMP
+rm -rf bash-$VERSION
+tar xvf $CWD/bash-$VERSION.tar.?z* --no-same-owner || exit 1
+cd bash-$VERSION || exit 1
+chown -R root:root .
+find . -perm 664 | xargs chmod 644
+find . -perm 775 | xargs chmod 755
+
+if [ -d $CWD/bash-${VERSION}-patches ]; then
+  ( cd $CWD/bash-${VERSION}-patches ; cat bash4?-??? ) | patch -p0 --verbose || exit 1
+fi
+
+# End of preparations
+if echo "$*" | grep -qw -- --prep ; then
+  exit 0
+fi
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  $CONFIG_FLAGS \
+  --build=$TARGET || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+mv $PKG/usr/share/doc $PKG/usr
+mkdir -p $PKG/bin
+mv $PKG/usr/bin/bash $PKG/bin/bash4.new
+# We don't include the "bashbug" script.
+rm -rf $PKG/usr/bin $PKG/usr/man/man1/bashbug.1
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# bash.1 is already installed by "make install"
+( cd doc
+  for page in builtins.1 rbash.1 ; do
+    cat $page | gzip -9c > $PKG/usr/man/man1/$page.gz
+  done
+)
+
+# Compress info files, if any:
+if [ -d $PKG/usr/info ]; then
+  ( cd $PKG/usr/info
+    rm -f dir
+    gzip -9 *
+  )
+fi
+
+mkdir -p $PKG/usr/doc/bash-$VERSION
+cp -a AUTHORS CHANGES COMPAT COPYING* INSTALL MANIFEST NEWS NOTES \
+  README* Y2K doc/FAQ doc/INTRO \
+  $PKG/usr/doc/bash-$VERSION
+( cd doc ; groff -ms -Tascii article.ms > $PKG/usr/doc/bash-$VERSION/article.txt )
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/*-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+makepkg -l y -c n $TMP/bash-$VERSION.$PATCHLEVEL-$ARCH-$BUILD.txz
+
diff --git a/source/a/coreutils/coreutils.SlackBuild b/source/a/coreutils/coreutils.SlackBuild
new file mode 100644
index 0000000..71fc87a
--- /dev/null
+++ b/source/a/coreutils/coreutils.SlackBuild
@@ -0,0 +1,212 @@
+#!/bin/bash
+
+# Copyright 2005-2018  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=coreutils
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.?z | cut -d - -f 2 | rev | cut -f 3- -d . | rev)}
+BUILD=${BUILD:-1}
+
+NUMJOBS=${NUMJOBS:--j6}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+elif [ "$ARCH" = "arm" ]; then
+  SLKCFLAGS="-O2 -march=armv4 -mtune=xscale"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "armel" ]; then
+  SLKCFLAGS="-O2 -march=armv4t"
+  LIBDIRSUFFIX=""
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz --no-same-owner || exit 1
+cd $PKGNAM-$VERSION || exit 1
+
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Patch uname to correctly display CPU information:
+zcat $CWD/$PKGNAM.uname.diff.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1
+
+# Revert change to ls quoting style introduced in coreutils-8.25:
+zcat $CWD/no_ls_quoting.patch.gz | patch -p1 --verbose --backup --suffix=.orig || exit 1
+
+# Compilation with glibc version later than 2.3.2 needs the environment
+# variable DEFAULT_POSIX2_VERSION set to 199209.
+# Without that line, the coreutils will start complaining about 'obsolete'
+# command switches, like "tail -20" will be considered obsolete.
+# This behaviour breaks many other packages... the 'obsolete' parameters are
+# too commonly used to disregard them.  Better to stick with the older more
+# widely accepted standards until things begin to demand the new way.
+
+FORCE_UNSAFE_CONFIGURE=1 \
+CFLAGS="$SLKCFLAGS" \
+DEFAULT_POSIX2_VERSION=199209 \
+./configure \
+  --prefix=/usr \
+  --bindir=/bin \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --sysconfdir=/etc \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --without-gmp \
+  --enable-install-program=arch \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# We have had the mktemp from debianutils included with Slackware for quite a
+# long time, and certain options are changed here, like changing -u to mean a
+# dry-run rather than to unlink the tempfile when finished.  Since this could
+# break existing scripts, unless someone can tell me a good reason why we
+# should start using a new version of mktemp, we will continue to use the
+# one we've been using.  If the new one starts to become expected, let me know.
+# We'll figure out what the best options are and go from there.
+mv $PKG/bin/mktemp $PKG/bin/mktemp-gnu
+mv $PKG/usr/man/man1/mktemp.1 $PKG/usr/man/man1/mktemp-gnu.1
+
+# This seems wrong, and it stomps on files in the ksh93 package, though I'm
+# not sure the placement of those is correct, either...  The ksh93 package
+# installs them as flat text files, while coreutils installs empty directories
+# Oh well, this is what we've done for years, and nobody's complained...
+rm -rf $PKG/usr/share/locale/*/LC_TIME
+
+# Move "arch" to /bin
+mv $PKG/usr/bin/arch $PKG/bin
+
+# These are important enough that they should probably all go into /bin at this
+# point...   Having some of them unavailable when /usr isn't mounted is just a
+# source of unending bug reports for various third party applications.
+# Time to end those reports.  :-)
+mkdir -p $PKG/bin $PKG/usr/bin
+( cd $PKG/usr/bin
+  for file in ../../bin/* ; do
+    ln --verbose -sf $file .
+  done
+)
+
+# Add some defaults, although a very slack-like set of default options are built
+# into /bin/ls now anyway:
+mkdir -p $PKG/etc
+zcat $CWD/DIR_COLORS.gz > $PKG/etc/DIR_COLORS.new
+
+# Since dircolors no longer provides any default aliases these scripts
+# will be needed for ls to act as expected:
+mkdir -p $PKG/etc/profile.d
+zcat $CWD/coreutils-dircolors.csh.gz > $PKG/etc/profile.d/coreutils-dircolors.csh
+zcat $CWD/coreutils-dircolors.sh.gz > $PKG/etc/profile.d/coreutils-dircolors.sh
+chmod 755 $PKG/etc/profile.d/*
+
+# Remove things that are provided by other Slackware packages:
+for dupe in hostname kill su uptime ; do
+  rm -f $PKG/bin/${dupe} $PKG/usr/bin/${dupe} \
+    $PKG/usr/sbin/${dupe} $PKG/usr/man/man?/${dupe}.* ;
+done
+
+# Add ginstall links (there's still a lot of stuff that needs this to compile):
+( cd $PKG/bin ; ln -sf install ginstall )
+( cd $PKG/usr/bin ; ln -sf ../../bin/ginstall ginstall )
+( cd $PKG/usr/man/man1 ; ln -sf install.1 ginstall.1 )
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+rm -f $PKG/usr/info/dir
+gzip -9 $PKG/usr/info/*
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS COPYING* NEWS README* THANKS THANKS-to-translators TODO \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/procps-ng/procps-ng.SlackBuild b/source/a/procps-ng/procps-ng.SlackBuild
new file mode 100644
index 0000000..07fac57
--- /dev/null
+++ b/source/a/procps-ng/procps-ng.SlackBuild
@@ -0,0 +1,260 @@
+#!/bin/bash
+
+# Copyright 2005-2018  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=procps-ng
+VERSION=${VERSION:-3.3.15}
+PSMISCVER=${PSMISCVER:-23.1}
+PROCINFONGVER=${PROCINFONGVER:-2.0.304}
+PROCINFOVER=${PROCINFOVER:-18}
+BUILD=${BUILD:-2}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+# TODO(muslack): procinfo should be built statically
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz --no-same-owner || exit 1
+cd $PKGNAM-$VERSION || exit 1
+tar xvf $CWD/psmisc-$PSMISCVER.tar.xz --no-same-owner || exit 1
+tar xvf $CWD/procinfo-ng-$PROCINFONGVER.tar.xz --no-same-owner || exit 1
+tar xvf $CWD/procinfo-$PROCINFOVER.tar.xz --no-same-owner || exit 1
+chown -R root:root .
+
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/ \
+  --bindir=/bin \
+  --sbindir=/sbin \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --includedir=/usr/include \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --datarootdir=/usr/share \
+  --docdir=/usr/doc/$PKGNAM-$VERSION \
+  --disable-shared \
+  --enable-static \
+  --disable-silent-rules \
+  --disable-rpath \
+  --enable-watch8bit \
+  --enable-skill \
+  --enable-sigwinch \
+  --enable-w-from \
+  --disable-kill \
+  --without-systemd \
+  --disable-modern-top \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Move the shared library to $PKG/lib${LIBDIRSUFFIX}:
+mkdir -p $PKG/lib${LIBDIRSUFFIX}
+( cd $PKG/usr/lib${LIBDIRSUFFIX}
+  for file in lib*.so.?.* ; do
+    mv $file ../../lib${LIBDIRSUFFIX}
+    ln -sf ../../lib${LIBDIRSUFFIX}/$file .
+  done
+  cp -a lib*.so.? ../../lib${LIBDIRSUFFIX}
+)
+
+# Remove .la file(s):
+rm -f $PKG/usr/lib${LIBDIRSUFFIX}/*.la
+
+# It seems that upstream has shuffled the location of many tools with the
+# 3.3.11 release.  To me, this just doesn't make sense to break any existing
+# scripts that might be using an absolute path, or to move tools that might
+# be needed before /usr is mounted into /usr.  So, we will make sure that
+# everything is moved back to where the Slackware locations have always been.
+# These tools belong in /bin:
+mkdir -p $PKG/bin
+for file in free killall ps ; do
+  find $PKG -name $file -exec mv "{}" $PKG/bin \;
+done
+# These tools belong in /sbin:
+mkdir -p $PKG/sbin
+for file in pidof sysctl ; do
+  find $PKG -name $file -exec mv "{}" $PKG/sbin \;
+done
+mkdir -p $PKG/usr/bin
+# These tools belong in /usr/bin:
+for file in fuser lsdev peekfd pgrep pkill pmap procinfo prtstat pstree pwdx skill slabtop snice socklist tload top uptime vmstat w watch ; do
+  find $PKG -name $file -exec mv "{}" $PKG/usr/bin \;
+done
+# These symlinks belong in /bin:
+rm -f $PKG/bin/pidof
+ln -sf /sbin/pidof $PKG/bin/pidof
+# These symlinks belong in /usr/bin:
+rm -f $PKG/usr/bin/free $PKG/usr/bin/pidof $PKG/usr/bin/ps
+ln -sf /bin/free $PKG/usr/bin/free
+ln -sf /sbin/pidof $PKG/usr/bin/pidof
+ln -sf /bin/ps $PKG/usr/bin/ps
+
+# Create /etc/sysctl.d:
+mkdir -p $PKG/etc/sysctl.d
+
+cd psmisc-$PSMISCVER || exit 1
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/psmisc-$PSMISCVER \
+  --disable-silent-rules \
+  --disable-rpath \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Move "killall" to the traditional location:
+mv $PKG/usr/bin/killall $PKG/bin
+ln -s /bin/killall $PKG/usr/bin/killall
+
+mkdir -p $PKG/usr/doc/psmisc-$PSMISCVER
+cp -a ChangeLog COPYING* NEWS README* $PKG/usr/doc/psmisc-$PSMISCVER
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$PKG/usr/doc/psmisc-$PSMISCVER
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+cd ../procinfo-ng-$PROCINFONGVER || exit 1
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/procinfo-ng-$PROCINFONGVER \
+  --enable-maintainer-mode \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || exit 1
+make install DESTDIR=$PKG || exit 1
+
+mkdir -p $PKG/usr/doc/procinfo-ng-$PROCINFONGVER
+cp -a GPL-2.txt LGPL-2.1.txt LICENSE.txt COPYING* README* $PKG/usr/doc/procinfo-ng-$PROCINFONGVER
+
+# Now install a couple of scripts from the original procinfo package.
+cd ../procinfo-$PROCINFOVER || exit 1
+install -m 0755 lsdev.pl $PKG/usr/bin/lsdev
+install -m 0755 socklist.pl $PKG/usr/bin/socklist
+install -m 0644 lsdev.8 socklist.8 $PKG/usr/man/man8
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1 | grep -v '\.gz$') ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# Back to the procps-ng main source directory...
+cd ..
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  AUTHORS ChangeLog COPYING* NEWS README* \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$PKG/usr/doc/$PKGNAM-$VERSION
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/$PKGNAM-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/shadow/shadow.SlackBuild b/source/a/shadow/shadow.SlackBuild
new file mode 100644
index 0000000..a8d4673
--- /dev/null
+++ b/source/a/shadow/shadow.SlackBuild
@@ -0,0 +1,192 @@
+#!/bin/bash
+
+# Copyright 2005-2018  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=shadow
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-5}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+NUMJOBS=${NUMJOBS:--j6}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-shadow
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+else
+  SLKCFLAGS="-O2"
+fi
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP
+rm -rf shadow-$VERSION
+tar xvf $CWD/shadow-$VERSION.tar.xz --no-same-owner || exit 1
+cd shadow-$VERSION
+
+# Apply some patches taken from the svn trunk that
+# fix some of the more serious bugs in 4.1.4.3:
+for patch in $CWD/patches/*.diff.gz ; do
+  zcat $patch | patch -p0 --verbose || exit 1
+done
+
+# Relax the restrictions on "su -c" when it is used to become root.
+# It's not likely that root is going to try to inject commands back into
+# the user's shell to hack it, and the unnecessary restriction is causing
+# breakage:
+zcat $CWD/shadow.CVE-2005-4890.relax.diff.gz | patch -p1 --verbose || exit 1
+
+# Patch a race condition that allows a user to kill processes that they don't
+# own.  Note that the bug requires that shadow is using PAM, which is not yet
+# the case on Slackware.  So we're unaffected, but patching this anyway in
+# -current, because you never know...
+zcat $CWD/shadow.CVE-2017-2616.diff.gz | patch -p1 --verbose || exit 1
+
+# Re-run automake because of r3299 patch to man/ru/Makefile.am:
+# (not used because it doesn't work...  above patch does the intended fix)
+#automake -f
+
+# Even if gethostname() returns the FQDN (long hostname), just display the
+# short version up to the first '.' on the login prompt:
+zcat $CWD/shadow.login.display.short.hostname.diff.gz | patch -p1 --verbose || exit 1
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/shadow-$VERSION \
+  --enable-subordinate-ids \
+  --enable-shared \
+  --without-libcrack \
+  --build=$ARCH-slackware-linux
+
+#  --enable-utmpx   # defaults to 'no'
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Fix user group = 100:
+zcat $CWD/useradd.gz > $PKG/etc/default/useradd
+
+# /bin/groups is provided by coreutils.
+rm -f $PKG/bin/groups
+find $PKG -name groups.1 -exec rm {} \;
+
+# Install a login.defs with unsurprising defaults:
+rm -f $PKG/etc/login.defs
+zcat $CWD/login.defs.gz > $PKG/etc/login.defs.new
+
+mv $PKG/etc/login.access $PKG/etc/login.access.new
+
+# I don't think this works well enough to recommend it.
+#mv $PKG/etc/limits $PKG/etc/limits.new
+rm -f $PKG/etc/limits
+
+# Add the friendly 'adduser' script:
+cat $CWD/adduser > $PKG/usr/sbin/adduser
+chmod 0755 $PKG/usr/sbin/adduser
+
+# Add sulogin to the package:
+cp -a src/sulogin $PKG/sbin
+( cd $PKG/bin ; ln -s ../sbin/sulogin )
+
+# Add the empty faillog log file:
+mkdir -p $PKG/var/log
+touch $PKG/var/log/faillog.new
+
+# Put some stuff back in "old" locations and make symlinks for compat
+( cd $PKG/usr/bin
+  mv faillog ../sbin
+  mv lastlog ../sbin
+  ln -s ../sbin/faillog
+  ln -s ../sbin/lastlog
+)
+
+# Use 4711 rather than 4755 permissions where setuid root is required:
+find $PKG -type f -perm 4755 -exec chmod 4711 "{}" \;
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/shadow-$VERSION
+cp -a \
+  COPYING* NEWS README* TODO doc/{README*,HOWTO,WISHLIST,*.txt} \
+  $PKG/usr/doc/shadow-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/shadow-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/sysvinit-functions/sysvinit-functions.SlackBuild b/source/a/sysvinit-functions/sysvinit-functions.SlackBuild
new file mode 100644
index 0000000..a6a81ab
--- /dev/null
+++ b/source/a/sysvinit-functions/sysvinit-functions.SlackBuild
@@ -0,0 +1,97 @@
+#!/bin/bash
+
+# Copyright 2005-2018  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=sysvinit-functions
+VERSION=${VERSION:-8.53}
+BUILD=${BUILD:-3}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-sysvinit-functions
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+# The functions that ship in /etc/rc.d/init.d are used mainly
+# by Red Hat (and derived) systems.  Most users will not need
+# them, but since some commerical software makes the assuption
+# that /etc/rc.d/init.d/functions will exist (and uses it),
+# shipping at least it and the sysvinit runlevel directories
+# will probably make life easier for everybody.  We'll maybe
+# ever consider splitting a few of the functions of the old
+# venerable BSD-style init scripts into runlevel scripts (if
+# it looks like it will make system maintainance easier).
+
+# Build supporting binaries:
+cd $TMP
+rm -rf function-src-$VERSION
+# A small patch was applied to initlog to shut it the %^@& up.
+tar xjf $CWD/function-src-$VERSION.tar.bz2 || exit 1
+cd function-src-$VERSION
+make || exit 1
+find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+mkdir -p $PKG/bin $PKG/sbin $PKG/usr/man/man{1,8}
+make install DESTDIR=$PKG || exit 1
+gzip -9 $PKG/usr/man/man?/*.?
+
+# The FHS/LSB is a little bit unclear as to what to do here --
+# /etc/rc.d/init.d has been declared "deprecated" for no good
+# reason at all (commercial vendors couldn't find /etc/rc.d?),
+# so we'll make both /etc/init.d and /etc/rc.d/init.d with the
+# same contents.  Hopefully this will make all the programs
+# happy.
+mkdir -p $PKG/etc/rc.d/init.d
+for file in $CWD/README.functions $CWD/functions ; do
+  cat $file > $PKG/etc/rc.d/init.d/$(basename $file)
+done
+chmod 755 $PKG/etc/rc.d/init.d/functions
+
+# Make empty runlevel directories:
+mkdir -p $PKG/etc/rc.d/rc{0,1,2,3,4,5,6}.d
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+makepkg -l y -c n $TMP/sysvinit-functions-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild b/source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild
new file mode 100644
index 0000000..1fa513f
--- /dev/null
+++ b/source/a/sysvinit-scripts/sysvinit-scripts.SlackBuild
@@ -0,0 +1,73 @@
+#!/bin/bash
+
+# Copyright 2005-2018  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=sysvinit-scripts
+VERSION=${VERSION:-2.1}
+ARCH=noarch
+BUILD=${BUILD:-19}
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-sysvinit-scripts
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+# Install Slackware scripts and config files from $CWD/scripts/:
+mkdir -p $PKG/etc/rc.d
+for file in rc.{4,6,K,M,S} rc.cpufreq rc.local rc.loop rc.sysvinit rc.modules rc.modules.local ; do
+  cp -a $CWD/scripts/$file $PKG/etc/rc.d/${file}.new
+  chmod 755 $PKG/etc/rc.d/${file}.new
+  chown root:root $PKG/etc/rc.d/${file}.new
+done
+cat $CWD/scripts/inittab > $PKG/etc/inittab.new
+chmod 644 $PKG/etc/inittab.new
+chown root:root $PKG/etc/inittab.new
+
+# Install /etc/default/cpufreq.new:
+mkdir -p $PKG/etc/default
+cat $CWD/default/cpufreq > $PKG/etc/default/cpufreq.new
+
+# Add a very handy tool for scanning new SCSI devices.  Most useful for
+# finding new USB and Firewire storage devices which show up as SCSI.
+mkdir -p $PKG/sbin
+cat $CWD/scripts/rescan-scsi-bus.sh > $PKG/sbin/rescan-scsi-bus
+chmod 755 $PKG/sbin/rescan-scsi-bus
+chown root:root $PKG/sbin/rescan-scsi-bus
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/sysvinit-scripts-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/sysvinit/sysvinit.SlackBuild b/source/a/sysvinit/sysvinit.SlackBuild
new file mode 100644
index 0000000..be64055
--- /dev/null
+++ b/source/a/sysvinit/sysvinit.SlackBuild
@@ -0,0 +1,131 @@
+#!/bin/bash
+
+# Copyright 2005-2018  Patrick J. Volkerding, Sebeka, Minnesota, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# NOTE: 2.90 used (from Current), 2.88 from 14.2 does not compile
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=sysvinit
+VERSION=${VERSION:-2.90}
+BUILD=${BUILD:-2}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-sysvinit
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf sysvinit-$VERSION
+tar xvf $CWD/sysvinit-$VERSION.tar.xz --no-same-owner || exit 1
+cd sysvinit-$VERSION
+
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+# sysvinit-2.90 added an undocumented feature that tries to spawn agetty if
+# it sees console= in the kernel command line. Avoiding the debate about
+# whether this code belongs in init at all, at least such a change # should
+# be documented, and probably made opt-in. This patch disables the new behavior
+# unless "sysvinit_agetty" is also seen in the kernel command line.
+zcat $CWD/sysvinit.no.console.agetty.without.sysvinit_agetty.diff.gz | patch -p1 -E --verbose --backup --suffix=.orig || exit 1
+
+# Fix paths for /etc/forcefsck and /etc/fastboot:
+zcat $CWD/sysvinit.paths.diff.gz | patch -p1 -E --verbose --backup --suffix=.orig || exit 1
+
+# Use /dev/initctl instead of /run/initctl ; this is a named pipe and probably
+# should be in /dev anyway, but more importantly, having the upgraded package
+# expect it in /run breaks shutdown/reboot without manual intervention
+zcat $CWD/sysvinit.use_dev_initctl_not_run_initctl.diff.gz | patch -p1 --verbose || exit 1
+
+mkdir -p $PKG/usr/doc/sysvinit-$VERSION
+cp -a COPYING* COPYRIGHT* README* \
+  doc/* \
+  $PKG/usr/doc/sysvinit-$VERSION
+
+cd src
+make clobber || exit 1
+make || exit 1
+
+mkdir -p $PKG/sbin
+for program in bootlogd halt init killall5 shutdown runlevel ; do
+  strip --strip-unneeded $program
+  cat $program > $PKG/sbin/$program
+  chmod 755 $PKG/sbin/$program
+  chown root:root $PKG/sbin/$program
+done
+mkdir -p $PKG/usr/bin
+for program in last ; do
+  strip --strip-unneeded $program
+  cat $program > $PKG/usr/bin/$program
+  chmod 755 $PKG/usr/bin/$program
+  chown root:root $PKG/usr/bin/$program
+done
+( cd $PKG/usr/bin ; ln -sf last lastb )
+mv $PKG/sbin/init $PKG/sbin/init.new
+chmod 755 $PKG/sbin/init.new
+chown root:root $PKG/sbin/init.new
+
+cd ../man
+mkdir -p $PKG/usr/man/man{1,5,8}
+for page in last.1 ; do
+  cat $page | gzip -9c > $PKG/usr/man/man1/$page.gz
+done
+for page in inittab.5 initscript.5 ; do
+  cat $page | gzip -9c > $PKG/usr/man/man5/$page.gz
+done
+for page in halt.8 init.8 killall5.8 poweroff.8 reboot.8 runlevel.8 \
+  shutdown.8 telinit.8 bootlogd.8 ; do
+  cat $page | gzip -9c > $PKG/usr/man/man8/$page.gz
+done
+( cd $PKG/usr/man/man1 ; ln -sf last.1.gz lastb.1.gz )
+
+mkdir -p $PKG/install
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+# Build the package:
+cd $PKG
+makepkg -l y -c n $TMP/sysvinit-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/tar/tar.SlackBuild b/source/a/tar/tar.SlackBuild
new file mode 100644
index 0000000..07cee5f
--- /dev/null
+++ b/source/a/tar/tar.SlackBuild
@@ -0,0 +1,171 @@
+#!/bin/bash
+
+# Copyright 2005-2018  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Slackware build script for tar
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=tar
+VERSION=1.30
+BUILD=${BUILD:-2}
+
+NUMJOBS=${NUMJOBS:--j7}
+
+# Automatically determine architecture for build & packaging:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+    *)    export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-tar
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+else
+  SLKCFLAGS="-O2"
+fi
+
+# This old version is the only one that won't clobber symlinks, e.g.:
+# someone moves /opt to /usr/opt and makes a symlink.  With newer
+# versions of tar, installing any new package will remove the /opt
+# symlink and plop down a new directory there.
+# Well, there's a lot of other bugs (the remote stuff particularly I'm
+# told is flaky) in tar-1.13, so it'll only be here now for use by the
+# Slackware package utils.  And, we'll even let people remove it and
+# the pkgutils will still try to work (but eventually they'll pay the
+# price :)
+#
+# NOTE:  The latest versions of tar can supposedly work for the pkgtools,
+# but some changes to add new options to the scripts might be required.
+#
+# Until tar-1.13 won't compile any more, it might be safer to keep using
+# it, though.
+cd $TMP
+rm -rf tar-1.13
+tar xvf $CWD/tar-1.13.tar.gz --no-same-owner || exit 1
+cd tar-1.13 || exit 1
+zcat $CWD/tar-1.13.bzip2.diff.gz | patch -p1 --verbose || exit 1
+# The original config.{guess,sub} do not work on x86_64
+cp -p --verbose /usr/share/libtool/build-aux/config.{guess,sub} .
+chown -R root:root .
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --disable-nls \
+  --build=$ARCH-slackware-linux || exit 1
+make $NUMJOBS || make || exit 1
+mkdir -p $PKG/bin
+cat src/tar > $PKG/bin/tar-1.13
+chmod 0755 $PKG/bin/tar-1.13
+# End building of tar-1.13
+
+cd $TMP
+rm -rf tar-$VERSION
+tar xvf $CWD/tar-$VERSION.tar.xz --no-same-owner || exit 1
+cd tar-$VERSION || exit 1
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# The "A lone zero block at %s" messages also cause problems:
+zcat $CWD/tar.nolonezero.diff.gz | patch -p1 --verbose || exit 1
+
+FORCE_UNSAFE_CONFIGURE=1 \
+CFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --infodir=/usr/info \
+  --mandir=/usr/man \
+  --docdir=/usr/doc/tar-$VERSION \
+  --enable-backup-scripts \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \
+    xargs strip --strip-unneeded 2> /dev/null
+)
+
+mv $PKG/usr/bin/tar $PKG/bin
+( cd $PKG/usr/bin ; ln -sf /bin/tar . )
+( cd $PKG/bin ; ln -sf tar tar-$VERSION )
+
+# Support "historic" rmt locations:
+mkdir -p $PKG/{etc,sbin}
+( cd $PKG/etc
+  ln -sf /usr/libexec/rmt .
+  cd $PKG/sbin
+  ln -sf /usr/libexec/rmt .
+)
+
+# Compress manual pages:
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do
+  ln -s $( readlink $i ).gz $i.gz
+  rm $i
+done
+
+# Compress info files, if any:
+if [ -d $PKG/usr/info ]; then
+  ( cd $PKG/usr/info
+    rm -f dir
+    gzip -9 *
+  )
+fi
+
+mkdir -p $PKG/usr/doc/tar-$VERSION
+cp -a \
+  AUTHORS COPYING* NEWS PORTS README* THANKS TODO \
+  $PKG/usr/doc/tar-$VERSION
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/tar-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/util-linux/util-linux.SlackBuild b/source/a/util-linux/util-linux.SlackBuild
new file mode 100644
index 0000000..f33c1da
--- /dev/null
+++ b/source/a/util-linux/util-linux.SlackBuild
@@ -0,0 +1,327 @@
+#!/bin/bash
+
+# Copyright 2008, 2009, 2010, 2011, 2012, 2013, 2015, 2017, 2018  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+# Slackware build script for util-linux
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=util-linux
+VERSION=${VERSION:-$(echo util-linux*.tar.xz | cut -d - -f 3  | rev | cut -f 3- -d . | rev)}
+BUILD=${BUILD:-1}
+
+ADJTIMEXVERS=1.29
+SETSERIALVERS=2.17
+ZIPTOOLVERS=1.4.0
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "s390" ]; then
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-util-linux
+
+rm -rf $PKG
+mkdir -p $TMP $PKG
+cd $TMP || exit 1
+rm -rf util-linux-$VERSION
+tar xvf $CWD/util-linux-$VERSION.tar.xz --no-same-owner || exit 1
+cd util-linux-$VERSION || exit 1
+chown -R root.root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+# Changing the fdisk -l output (this was done prior to util-linux-ng) broke
+# our installation scripts, so we have changed the name of partition type
+# 83 back to "Linux swap":
+zcat $CWD/util-linux.fdisk-no-solaris.diff.gz | patch -p1 --verbose || exit 1
+
+# This just call the configure script with $1 either being 2 for python2
+# or 3 for python3.
+#
+# The releasenotes say to use --runstatedir, but it doesn't work and the
+# configure script fails. So we'll leave things using localstatedir, but
+# check again later:
+#
+#   --runstatedir=/run
+configure_with_python(){
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --sysconfdir=/etc \
+  --localstatedir=/var \
+  --mandir=/usr/man \
+  --infodir=/usr/info \
+  --docdir=/usr/doc/util-linux-$VERSION \
+  --disable-shared \
+  --enable-static \
+  --disable-more \
+  --enable-agetty \
+  --enable-kill \
+  --disable-last \
+  --enable-libmount-support-mtab \
+  --enable-line \
+  --enable-mesg \
+  --enable-partx \
+  --enable-pg \
+  --enable-raw \
+  --enable-rename \
+  --disable-login \
+  --enable-schedutils \
+  --disable-wall \
+  --disable-write \
+  --enable-use-tty-group \
+  --enable-libblkid \
+  --disable-libfdisk \
+  --enable-libmount \
+  --enable-libuuid \
+  --disable-uuidd \
+  --without-python \
+  --build=$ARCH-slackware-linux
+}
+
+CFLAGS="$SLKCFLAGS" \
+  configure_with_python 2 || exit 1
+
+make $NUMJOBS || make || exit 1
+make install DESTDIR=$PKG || exit 1
+
+# Build python3 bindings for libmount:
+make clean
+CFLAGS="$SLKCFLAGS" \
+  configure_with_python 3 || exit 1
+make \
+  install-pylibmountexecLTLIBRARIES \
+  install-pylibmountexecPYTHON \
+  DESTDIR=$PKG || exit 1
+
+# Remove all overlap with the shadow package, since --disable-login doesn't quite do that:
+rm $PKG/sbin/nologin $PKG/usr/man/man8/nologin.8 $PKG/sbin/sulogin $PKG/usr/man/man8/sulogin.8
+
+# Move the libblkid, libfdisk, libmount, libsmartcols, and
+# libuuid libraries to /lib${LIBSUFFIX}:
+mkdir -p $PKG/lib${LIBDIRSUFFIX}
+( cd $PKG/usr/lib${LIBDIRSUFFIX}
+  mv libblkid.so.1* $PKG/lib${LIBDIRSUFFIX}
+  mv libfdisk.so.1* $PKG/lib${LIBDIRSUFFIX}
+  mv libmount.so.1* $PKG/lib${LIBDIRSUFFIX}
+  mv libsmartcols.so.1* $PKG/lib${LIBDIRSUFFIX}
+  mv libuuid.so.1* $PKG/lib${LIBDIRSUFFIX}
+  rm -f libblkid.so libfdisk.so libmount.so libsmartcols.so libuuid.so
+  ln -sf ../../lib${LIBDIRSUFFIX}/libblkid.so.1 libblkid.so
+  ln -sf ../../lib${LIBDIRSUFFIX}/libfdisk.so.1 libfdisk.so
+  ln -sf ../../lib${LIBDIRSUFFIX}/libmount.so.1 libmount.so
+  ln -sf ../../lib${LIBDIRSUFFIX}/libsmartcols.so.1 libsmartcols.so
+  ln -sf ../../lib${LIBDIRSUFFIX}/libuuid.so.1 libuuid.so
+)
+
+# Moving things around that have been in the same place
+# for 15 years is, IMHO, not a wise idea AT ALL.
+# If this had to be moved, some place out of /usr might
+# have shown a grain of insight...
+if [ -r $PKG/usr/sbin/fdformat ]; then
+  mkdir -p $PKG/usr/bin
+  mv $PKG/usr/sbin/fdformat $PKG/usr/bin/fdformat
+  # Now since stuff will start looking in this new place,
+  # we have no choice but to link these:
+  ( cd $PKG/usr/sbin
+    ln -sf ../bin/fdformat .
+  )
+fi
+
+# ddate.{1,c} taken from https://github.com/bo0ts/ddate:
+cp -a $CWD/ddate.? .
+cc -O -o ddate ddate.c
+cp -a ddate $PKG/usr/bin
+cat ddate.1 > $PKG/usr/man/man1/ddate.1
+chown root:root $PKG/usr/bin/ddate
+
+# Build ziptool (install as jaztool to avoid conflict with libzip):
+cd $TMP || exit 1
+rm -rf ziptool-$ZIPTOOLVERS
+tar xvf $CWD/ziptool-$ZIPTOOLVERS.tar.xz --no-same-owner || exit 1
+cd ziptool-$ZIPTOOLVERS || exit 1
+zcat $CWD/ziptool-fix_build.patch.gz | patch -p1 || exit 1
+mkdir scsi
+cat $CWD/scsi_ioctl.h > scsi/scsi_ioctl.h
+chown -R root:root .
+make || exit 1
+strip ziptool
+cat ziptool > $PKG/sbin/jaztool
+chmod 0755 $PKG/sbin/jaztool
+mkdir -p $PKG/usr/doc/ziptool-$ZIPTOOLVERS
+cp -a README $PKG/usr/doc/ziptool-$ZIPTOOLVERS
+chmod 644 $PKG/usr/doc/ziptool-$ZIPTOOLVERS/*
+cat ziptool.1.gz > $PKG/usr/man/man1/jaztool.1.gz
+
+# Build bsdstrings
+cd $TMP || exit 1
+rm -rf bsdstrings
+tar xvf $CWD/bsdstrings.tar.gz --no-same-owner || exit 1
+cd bsdstrings || exit 1
+zcat $CWD/bsdstrings-util-linux_overflow.diff.gz | patch -p1 --verbose || exit 1
+make || exit 1
+strip strings
+cat strings > $PKG/usr/bin/strings-BSD
+chmod 0755 $PKG/usr/bin/strings-BSD
+cat strings.1 | gzip -9c > $PKG/usr/man/man1/strings-BSD.1.gz
+
+# Build adjtimex
+cd $TMP || exit 1
+rm -rf adjtimex-$ADJTIMEXVERS
+tar xvf $CWD/adjtimex_${ADJTIMEXVERS}.orig.tar.gz --no-same-owner || exit 1
+cd adjtimex-$ADJTIMEXVERS || exit 1
+chown -R root:root .
+zcat $CWD/adjtimex_1.29-2.2.diff.gz | patch -p1 || exit 1
+CFLAGS=-O2 ./configure --prefix=/usr || exit 1
+make || exit 1
+strip adjtimex
+cat adjtimex > $PKG/sbin/adjtimex
+chmod 0755 $PKG/sbin/adjtimex
+cat adjtimex.8 | gzip -9c > $PKG/usr/man/man8/adjtimex.8.gz
+mkdir -p $PKG/usr/doc/adjtimex-$ADJTIMEXVERS
+cp -a COPYING COPYRIGHT README README.ru adjtimex.lsm \
+  $PKG/usr/doc/adjtimex-$ADJTIMEXVERS
+
+# Build setserial
+cd $TMP || exit 1
+rm -rf setserial-$SETSERIALVERS
+tar xvf $CWD/setserial-$SETSERIALVERS.tar.gz --no-same-owner || exit 1
+cd setserial-$SETSERIALVERS || exit 1
+chown -R root:root .
+zcat $CWD/setserial-rc.serial.diff.gz | patch -E -p1 --verbose || exit 1
+zcat $CWD/setserial-undef_TIOCGHAYESESP.diff.gz | patch -E -p1 --verbose || exit 1
+# The original config.{guess,sub} do not work on x86_64
+cp -p /usr/share/libtool/config/config.{guess,sub} .
+./configure --prefix=/usr || exit 1
+make || exit 1
+strip setserial
+cat setserial > $PKG/sbin/setserial
+chmod 0755 $PKG/sbin/setserial
+mkdir -p $PKG/etc/rc.d
+cat rc.serial > $PKG/etc/rc.d/rc.serial.new
+cat serial.conf > $PKG/etc/serial.conf.new
+cat setserial.8 | gzip -9c > $PKG/usr/man/man8/setserial.8.gz
+
+# These have always traditionally been available before /usr
+# might be mounted:
+( cd $PKG/usr/bin
+  mv getopt setterm $PKG/bin
+  cd $PKG/usr/bin
+  ln -s ../../bin/getopt .
+  ln -s ../../bin/setterm .
+)
+
+cd $TMP/util-linux-$VERSION # Go back home :)
+
+# Now let's add some important symlinks :)
+( cd $PKG/sbin
+  ln -s ../bin/mount .
+  ln -s ../bin/umount .
+  #ln -s ziptool jaztool
+  ln -s hwclock clock
+  cd $PKG/usr/sbin
+  ln -s ../../sbin/cfdisk .
+  ln -s ../../sbin/ctrlaltdel .
+  ln -s ../../sbin/sfdisk .
+  cd $PKG/usr/bin
+  ln -s ../sbin/readprofile .
+  # tunelp was removed by upstream:
+  #ln -s ../sbin/tunelp .
+  ln -s ../../bin/more .
+  ln -s ../../sbin/raw .
+  cd $PKG/usr/man/man1
+  #ln -s ziptool.1 jaztool.1
+  cd $PKG/usr/man/man8
+  ln -s hwclock.8 clock.8
+)
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" \
+  | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Compress and if needed symlink the man pages:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+# Compress info page and remove dir file
+rm $PKG/usr/info/dir
+gzip -9 $PKG/usr/info/*
+
+mkdir -p $PKG/usr/doc/util-linux-$VERSION
+cp -a AUTHORS COPYING* DEPRECATED NEWS README* \
+  Documentation/v${VERSION}-ReleaseNotes \
+  Documentation/licenses/* Documentation/{TODO,*.txt} \
+  $PKG/usr/doc/util-linux-$VERSION
+
+mkdir $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/util-linux-$VERSION-$ARCH-$BUILD.txz
+
diff --git a/source/a/xz/xz.SlackBuild b/source/a/xz/xz.SlackBuild
new file mode 100644
index 0000000..1c11711
--- /dev/null
+++ b/source/a/xz/xz.SlackBuild
@@ -0,0 +1,167 @@
+#!/bin/bash
+
+# Copyright 2009, 2010, 2011, 2012, 2018  Patrick J. Volkerding, Sebeka, MN, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PKGNAM=xz
+VERSION=${VERSION:-$(echo $PKGNAM-*.tar.xz --no-same-owner | rev | cut -f 3- -d . | cut -f 1 -d - | rev)}
+BUILD=${BUILD:-1}
+
+# Automatically determine the architecture we're building on:
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) export ARCH=i586 ;;
+    arm*) export ARCH=arm ;;
+    # Unless $ARCH is already set, use uname -m for all other archs:
+       *) export ARCH=$( uname -m ) ;;
+  esac
+fi
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz"
+  exit 0
+fi
+
+case "$ARCH" in
+  i586)      SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+             LIBDIRSUFFIX=""
+             ;;
+  s390)      SLKCFLAGS="-O2"
+             LIBDIRSUFFIX=""
+             ;;
+  powerpc)   SLKCFLAGS="-O2"
+             LIBDIRSUFFIX=""
+             ;;
+  x86_64)    SLKCFLAGS="-O2 -fPIC"
+             LIBDIRSUFFIX="64"
+             ;;
+  athlon-xp) SLKCFLAGS="-march=athlon-xp -O3 -pipe -fomit-frame-pointer"
+             LIBDIRSUFFIX=""
+             ;;
+  arm)       SLKCFLAGS="-O2 -march=armv4 -mtune=xscale"
+             LIBDIRSUFFIX=""
+             ;;
+  armel)     SLKCFLAGS="-O2 -march=armv4t"
+             LIBDIRSUFFIX=""
+             ;;
+  *)         SLKCFLAGS="-O2"
+             LIBDIRSUFFIX=""
+             ;;
+esac
+
+NUMJOBS=${NUMJOBS:-" -j7 "}
+
+TMP=${TMP:-/tmp}
+PKG=$TMP/package-$PKGNAM
+rm -rf $PKG
+mkdir -p $TMP $PKG
+
+cd $TMP
+rm -rf $PKGNAM-$VERSION
+tar xvf $CWD/$PKGNAM-$VERSION.tar.xz || exit 1
+cd $PKGNAM-$VERSION
+chown -R root:root .
+find . \
+  \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+  -exec chmod 755 {} \; -o \
+  \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+  -exec chmod 644 {} \;
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --libdir=/usr/lib${LIBDIRSUFFIX} \
+  --docdir=/usr/doc/xz-$VERSION \
+  --sysconfdir=/etc \
+  --mandir=/usr/man \
+  --disable-shared \
+  --enable-static \
+  --disable-rpath \
+  --program-prefix= \
+  --program-suffix= \
+  --build=$ARCH-slackware-linux || exit 1
+
+make $NUMJOBS || make || exit 1
+make DESTDIR=$PKG install || exit 1
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# It might be advisable to have the libraries in /lib${LIBDIRSUFFIX}:
+mkdir -p $PKG/lib${LIBDIRSUFFIX}
+mv $PKG/usr/lib${LIBDIRSUFFIX}/liblzma.so.* $PKG/lib${LIBDIRSUFFIX}
+( cd $PKG/usr/lib${LIBDIRSUFFIX}
+  rm -f liblzma.so
+  ln -sf ../../lib${LIBDIRSUFFIX}/liblzma.so.? liblzma.so
+)
+
+# At least the xz binary should also be in /bin:
+mkdir -p $PKG/bin
+mv $PKG/usr/bin/xz $PKG/bin
+( cd $PKG/usr/bin
+  ln -sf ../../bin/xz .
+)
+
+# Strip binaries:
+( cd $PKG
+  find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+  find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null
+)
+
+# Compress and link manpages, if any:
+if [ -d $PKG/usr/man ]; then
+  ( cd $PKG/usr/man
+    for manpagedir in $(find . -type d -name "man*") ; do
+      ( cd $manpagedir
+        for eachpage in $( find . -type l -maxdepth 1) ; do
+          ln -s $( readlink $eachpage ).gz $eachpage.gz
+          rm $eachpage
+        done
+        gzip -9 *.?
+      )
+    done
+  )
+fi
+
+mkdir -p $PKG/usr/doc/$PKGNAM-$VERSION
+cp -a \
+  ABOUT-NLS AUTHORS COPYING* INSTALL* NEWS PACKAGERS README* THANKS \
+  $PKG/usr/doc/$PKGNAM-$VERSION
+
+# If there's a ChangeLog, installing at least part of the recent history
+# is useful, but don't let it get totally out of control:
+if [ -r ChangeLog ]; then
+  DOCSDIR=$(echo $PKG/usr/doc/${PKGNAM}-$VERSION)
+  cat ChangeLog | head -n 1000 > $DOCSDIR/ChangeLog
+  touch -r ChangeLog $DOCSDIR/ChangeLog
+fi
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $TMP/${PKGNAM}-${VERSION}-${ARCH}-${BUILD}.txz
+