diff options
Diffstat (limited to 'source/a/util-linux/util-linux.SlackBuild')
| -rw-r--r-- | source/a/util-linux/util-linux.SlackBuild | 327 |
1 files changed, 327 insertions, 0 deletions
diff --git a/source/a/util-linux/util-linux.SlackBuild b/source/a/util-linux/util-linux.SlackBuild new file mode 100644 index 0000000..f33c1da --- /dev/null +++ b/source/a/util-linux/util-linux.SlackBuild @@ -0,0 +1,327 @@ +#!/bin/bash + +# Copyright 2008, 2009, 2010, 2011, 2012, 2013, 2015, 2017, 2018 Patrick J. Volkerding, Sebeka, MN, USA +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +# Slackware build script for util-linux + +cd $(dirname $0) ; CWD=$(pwd) + +PKGNAM=util-linux +VERSION=${VERSION:-$(echo util-linux*.tar.xz | cut -d - -f 3 | rev | cut -f 3- -d . | rev)} +BUILD=${BUILD:-1} + +ADJTIMEXVERS=1.29 +SETSERIALVERS=2.17 +ZIPTOOLVERS=1.4.0 + +NUMJOBS=${NUMJOBS:-" -j7 "} + +# Automatically determine the architecture we're building on: +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) export ARCH=i586 ;; + arm*) export ARCH=arm ;; + # Unless $ARCH is already set, use uname -m for all other archs: + *) export ARCH=$( uname -m ) ;; + esac +fi + +# If the variable PRINT_PACKAGE_NAME is set, then this script will report what +# the name of the created package would be, and then exit. This information +# could be useful to other scripts. +if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then + echo "$PKGNAM-$VERSION-$ARCH-$BUILD.txz" + exit 0 +fi + +if [ "$ARCH" = "i586" ]; then + SLKCFLAGS="-O2 -march=i586 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "s390" ]; then + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +TMP=${TMP:-/tmp} +PKG=$TMP/package-util-linux + +rm -rf $PKG +mkdir -p $TMP $PKG +cd $TMP || exit 1 +rm -rf util-linux-$VERSION +tar xvf $CWD/util-linux-$VERSION.tar.xz --no-same-owner || exit 1 +cd util-linux-$VERSION || exit 1 +chown -R root.root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +# Changing the fdisk -l output (this was done prior to util-linux-ng) broke +# our installation scripts, so we have changed the name of partition type +# 83 back to "Linux swap": +zcat $CWD/util-linux.fdisk-no-solaris.diff.gz | patch -p1 --verbose || exit 1 + +# This just call the configure script with $1 either being 2 for python2 +# or 3 for python3. +# +# The releasenotes say to use --runstatedir, but it doesn't work and the +# configure script fails. So we'll leave things using localstatedir, but +# check again later: +# +# --runstatedir=/run +configure_with_python(){ +./configure \ + --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ + --sysconfdir=/etc \ + --localstatedir=/var \ + --mandir=/usr/man \ + --infodir=/usr/info \ + --docdir=/usr/doc/util-linux-$VERSION \ + --disable-shared \ + --enable-static \ + --disable-more \ + --enable-agetty \ + --enable-kill \ + --disable-last \ + --enable-libmount-support-mtab \ + --enable-line \ + --enable-mesg \ + --enable-partx \ + --enable-pg \ + --enable-raw \ + --enable-rename \ + --disable-login \ + --enable-schedutils \ + --disable-wall \ + --disable-write \ + --enable-use-tty-group \ + --enable-libblkid \ + --disable-libfdisk \ + --enable-libmount \ + --enable-libuuid \ + --disable-uuidd \ + --without-python \ + --build=$ARCH-slackware-linux +} + +CFLAGS="$SLKCFLAGS" \ + configure_with_python 2 || exit 1 + +make $NUMJOBS || make || exit 1 +make install DESTDIR=$PKG || exit 1 + +# Build python3 bindings for libmount: +make clean +CFLAGS="$SLKCFLAGS" \ + configure_with_python 3 || exit 1 +make \ + install-pylibmountexecLTLIBRARIES \ + install-pylibmountexecPYTHON \ + DESTDIR=$PKG || exit 1 + +# Remove all overlap with the shadow package, since --disable-login doesn't quite do that: +rm $PKG/sbin/nologin $PKG/usr/man/man8/nologin.8 $PKG/sbin/sulogin $PKG/usr/man/man8/sulogin.8 + +# Move the libblkid, libfdisk, libmount, libsmartcols, and +# libuuid libraries to /lib${LIBSUFFIX}: +mkdir -p $PKG/lib${LIBDIRSUFFIX} +( cd $PKG/usr/lib${LIBDIRSUFFIX} + mv libblkid.so.1* $PKG/lib${LIBDIRSUFFIX} + mv libfdisk.so.1* $PKG/lib${LIBDIRSUFFIX} + mv libmount.so.1* $PKG/lib${LIBDIRSUFFIX} + mv libsmartcols.so.1* $PKG/lib${LIBDIRSUFFIX} + mv libuuid.so.1* $PKG/lib${LIBDIRSUFFIX} + rm -f libblkid.so libfdisk.so libmount.so libsmartcols.so libuuid.so + ln -sf ../../lib${LIBDIRSUFFIX}/libblkid.so.1 libblkid.so + ln -sf ../../lib${LIBDIRSUFFIX}/libfdisk.so.1 libfdisk.so + ln -sf ../../lib${LIBDIRSUFFIX}/libmount.so.1 libmount.so + ln -sf ../../lib${LIBDIRSUFFIX}/libsmartcols.so.1 libsmartcols.so + ln -sf ../../lib${LIBDIRSUFFIX}/libuuid.so.1 libuuid.so +) + +# Moving things around that have been in the same place +# for 15 years is, IMHO, not a wise idea AT ALL. +# If this had to be moved, some place out of /usr might +# have shown a grain of insight... +if [ -r $PKG/usr/sbin/fdformat ]; then + mkdir -p $PKG/usr/bin + mv $PKG/usr/sbin/fdformat $PKG/usr/bin/fdformat + # Now since stuff will start looking in this new place, + # we have no choice but to link these: + ( cd $PKG/usr/sbin + ln -sf ../bin/fdformat . + ) +fi + +# ddate.{1,c} taken from https://github.com/bo0ts/ddate: +cp -a $CWD/ddate.? . +cc -O -o ddate ddate.c +cp -a ddate $PKG/usr/bin +cat ddate.1 > $PKG/usr/man/man1/ddate.1 +chown root:root $PKG/usr/bin/ddate + +# Build ziptool (install as jaztool to avoid conflict with libzip): +cd $TMP || exit 1 +rm -rf ziptool-$ZIPTOOLVERS +tar xvf $CWD/ziptool-$ZIPTOOLVERS.tar.xz --no-same-owner || exit 1 +cd ziptool-$ZIPTOOLVERS || exit 1 +zcat $CWD/ziptool-fix_build.patch.gz | patch -p1 || exit 1 +mkdir scsi +cat $CWD/scsi_ioctl.h > scsi/scsi_ioctl.h +chown -R root:root . +make || exit 1 +strip ziptool +cat ziptool > $PKG/sbin/jaztool +chmod 0755 $PKG/sbin/jaztool +mkdir -p $PKG/usr/doc/ziptool-$ZIPTOOLVERS +cp -a README $PKG/usr/doc/ziptool-$ZIPTOOLVERS +chmod 644 $PKG/usr/doc/ziptool-$ZIPTOOLVERS/* +cat ziptool.1.gz > $PKG/usr/man/man1/jaztool.1.gz + +# Build bsdstrings +cd $TMP || exit 1 +rm -rf bsdstrings +tar xvf $CWD/bsdstrings.tar.gz --no-same-owner || exit 1 +cd bsdstrings || exit 1 +zcat $CWD/bsdstrings-util-linux_overflow.diff.gz | patch -p1 --verbose || exit 1 +make || exit 1 +strip strings +cat strings > $PKG/usr/bin/strings-BSD +chmod 0755 $PKG/usr/bin/strings-BSD +cat strings.1 | gzip -9c > $PKG/usr/man/man1/strings-BSD.1.gz + +# Build adjtimex +cd $TMP || exit 1 +rm -rf adjtimex-$ADJTIMEXVERS +tar xvf $CWD/adjtimex_${ADJTIMEXVERS}.orig.tar.gz --no-same-owner || exit 1 +cd adjtimex-$ADJTIMEXVERS || exit 1 +chown -R root:root . +zcat $CWD/adjtimex_1.29-2.2.diff.gz | patch -p1 || exit 1 +CFLAGS=-O2 ./configure --prefix=/usr || exit 1 +make || exit 1 +strip adjtimex +cat adjtimex > $PKG/sbin/adjtimex +chmod 0755 $PKG/sbin/adjtimex +cat adjtimex.8 | gzip -9c > $PKG/usr/man/man8/adjtimex.8.gz +mkdir -p $PKG/usr/doc/adjtimex-$ADJTIMEXVERS +cp -a COPYING COPYRIGHT README README.ru adjtimex.lsm \ + $PKG/usr/doc/adjtimex-$ADJTIMEXVERS + +# Build setserial +cd $TMP || exit 1 +rm -rf setserial-$SETSERIALVERS +tar xvf $CWD/setserial-$SETSERIALVERS.tar.gz --no-same-owner || exit 1 +cd setserial-$SETSERIALVERS || exit 1 +chown -R root:root . +zcat $CWD/setserial-rc.serial.diff.gz | patch -E -p1 --verbose || exit 1 +zcat $CWD/setserial-undef_TIOCGHAYESESP.diff.gz | patch -E -p1 --verbose || exit 1 +# The original config.{guess,sub} do not work on x86_64 +cp -p /usr/share/libtool/config/config.{guess,sub} . +./configure --prefix=/usr || exit 1 +make || exit 1 +strip setserial +cat setserial > $PKG/sbin/setserial +chmod 0755 $PKG/sbin/setserial +mkdir -p $PKG/etc/rc.d +cat rc.serial > $PKG/etc/rc.d/rc.serial.new +cat serial.conf > $PKG/etc/serial.conf.new +cat setserial.8 | gzip -9c > $PKG/usr/man/man8/setserial.8.gz + +# These have always traditionally been available before /usr +# might be mounted: +( cd $PKG/usr/bin + mv getopt setterm $PKG/bin + cd $PKG/usr/bin + ln -s ../../bin/getopt . + ln -s ../../bin/setterm . +) + +cd $TMP/util-linux-$VERSION # Go back home :) + +# Now let's add some important symlinks :) +( cd $PKG/sbin + ln -s ../bin/mount . + ln -s ../bin/umount . + #ln -s ziptool jaztool + ln -s hwclock clock + cd $PKG/usr/sbin + ln -s ../../sbin/cfdisk . + ln -s ../../sbin/ctrlaltdel . + ln -s ../../sbin/sfdisk . + cd $PKG/usr/bin + ln -s ../sbin/readprofile . + # tunelp was removed by upstream: + #ln -s ../sbin/tunelp . + ln -s ../../bin/more . + ln -s ../../sbin/raw . + cd $PKG/usr/man/man1 + #ln -s ziptool.1 jaztool.1 + cd $PKG/usr/man/man8 + ln -s hwclock.8 clock.8 +) + +find $PKG | xargs file | grep -e "executable" -e "shared object" \ + | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + +# Don't ship .la files: +rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la + +# Compress and if needed symlink the man pages: +if [ -d $PKG/usr/man ]; then + ( cd $PKG/usr/man + for manpagedir in $(find . -type d -name "man*") ; do + ( cd $manpagedir + for eachpage in $( find . -type l -maxdepth 1) ; do + ln -s $( readlink $eachpage ).gz $eachpage.gz + rm $eachpage + done + gzip -9 *.? + ) + done + ) +fi + +# Compress info page and remove dir file +rm $PKG/usr/info/dir +gzip -9 $PKG/usr/info/* + +mkdir -p $PKG/usr/doc/util-linux-$VERSION +cp -a AUTHORS COPYING* DEPRECATED NEWS README* \ + Documentation/v${VERSION}-ReleaseNotes \ + Documentation/licenses/* Documentation/{TODO,*.txt} \ + $PKG/usr/doc/util-linux-$VERSION + +mkdir $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +zcat $CWD/doinst.sh.gz > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $TMP/util-linux-$VERSION-$ARCH-$BUILD.txz + |