blob: a2f71059196f9a4219d69f22cd36e1ef99870b5a (
plain)
1
2
3
4
5
6
7
8
9
10
11
12
13
14
15
16
17
18
19
20
21
22
23
24
25
26
27
28
29
30
31
32
33
34
35
36
37
38
39
40
41
42
43
44
45
46
47
48
49
50
51
52
53
54
55
56
57
58
59
60
61
62
63
64
65
66
67
68
69
70
71
72
73
74
75
76
77
78
79
80
81
82
83
84
85
86
87
88
89
90
91
92
93
94
95
96
97
98
99
100
101
102
103
104
105
106
107
108
109
110
111
112
113
114
115
116
117
118
119
120
121
122
123
124
125
126
127
128
129
130
131
132
133
134
135
136
|
# Raspberry Pi build guide
This guide has been tested with Ubuntu 16.04 (Xenial) x86_64 and 18.04 (Bionic). It is meant to cross-compile Kodi for the Raspberry Pi using **[Kodi's unified depends build system](../tools/depends/README.md)**. Please read it in full before you proceed to familiarize yourself with the build procedure.
If you're looking to build Kodi natively using **[Raspbian](https://www.raspberrypi.org/downloads/raspbian/)**, you should follow the **[Ubuntu guide](README.Ubuntu.md)** instead. Several other distributions have **[specific guides](README.md)** and a general **[Linux guide](README.Linux.md)** is also available.
## Table of Contents
1. **[Document conventions](#1-document-conventions)**
2. **[Install the required packages](#2-install-the-required-packages)**
3. **[Get the source code](#3-get-the-source-code)**
3.1. **[Get Raspberry Pi tools and firmware](#31-get-raspberry-pi-tools-and-firmware)**
4. **[Build tools and dependencies](#4-build-tools-and-dependencies)**
5. **[Build Kodi](#5-build-kodi)**
## 1. Document conventions
This guide assumes you are using `terminal`, also known as `console`, `command-line` or simply `cli`. Commands need to be run at the terminal, one at a time and in the provided order.
This is a comment that provides context:
```
this is a command
this is another command
and yet another one
```
**Example:** Clone Kodi's current master branch:
```
git clone https://github.com/xbmc/xbmc kodi
```
Commands that contain strings enclosed in angle brackets denote something you need to change to suit your needs.
```
git clone -b <branch-name> https://github.com/xbmc/xbmc kodi
```
**Example:** Clone Kodi's current Krypton branch:
```
git clone -b Krypton https://github.com/xbmc/xbmc kodi
```
Several different strategies are used to draw your attention to certain pieces of information. In order of how critical the information is, these items are marked as a note, tip, or warning. For example:
**NOTE:** Linux is user friendly... It's just very particular about who its friends are.
**TIP:** Algorithm is what developers call code they do not want to explain.
**WARNING:** Developers don't change light bulbs. It's a hardware problem.
**[back to top](#table-of-contents)** | **[back to section top](#1-document-conventions)**
## 2. Install the required packages
Install build dependencies needed to cross-compile Kodi for the Raspberry Pi:
```
sudo apt install autoconf bison build-essential curl default-jdk gawk git gperf libcurl4-openssl-dev zlib1g-dev
```
**[back to top](#table-of-contents)**
## 3. Get the source code
Change to your `home` directory:
```
cd $HOME
```
Clone Kodi's current master branch:
```
git clone https://github.com/xbmc/xbmc kodi
```
### 3.1. Get Raspberry Pi tools and firmware
Clone Raspberry Pi tools:
```
git clone https://github.com/raspberrypi/tools --depth=1
```
Clone Raspberry Pi firmware:
```
git clone https://github.com/raspberrypi/firmware --depth=1
```
**[back to top](#table-of-contents)**
## 4. Build tools and dependencies
Create target directory:
```
mkdir $HOME/kodi-rpi
```
Prepare to configure build:
```
cd $HOME/kodi/tools/depends
./bootstrap
```
**TIP:** Look for comments starting with `Or ...` and only execute the command(s) you need.
Configure build for Raspberry Pi 1:
```
./configure --host=arm-linux-gnueabihf --prefix=$HOME/kodi-rpi --with-toolchain=$HOME/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf --with-firmware=$HOME/firmware --with-platform=raspberry-pi --disable-debug
```
Or configure build for Raspberry Pi 2 and 3:
```
./configure --host=arm-linux-gnueabihf --prefix=$HOME/kodi-rpi --with-toolchain=$HOME/tools/arm-bcm2708/arm-rpi-4.9.3-linux-gnueabihf --with-firmware=$HOME/firmware --with-platform=raspberry-pi2 --disable-debug
```
Build tools and dependencies:
```
make -j$(getconf _NPROCESSORS_ONLN)
```
**TIP:** By adding `-j<number>` to the make command, you can choose how many concurrent jobs will be used and expedite the build process. It is recommended to use `-j$(getconf _NPROCESSORS_ONLN)` to compile on all available processor cores. The build machine can also be configured to do this automatically by adding `export MAKEFLAGS="-j(getconf _NPROCESSORS_ONLN)"` to your shell config (e.g. `~/.bashrc`).
**[back to top](#table-of-contents)** | **[back to section top](#4-build-tools-and-dependencies)**
## 5. Build Kodi
Configure CMake build:
```
cd $HOME/kodi
make -C tools/depends/target/cmakebuildsys
```
Build Kodi:
```
cd $HOME/kodi/build
make -j$(getconf _NPROCESSORS_ONLN)
```
Install to target directory:
```
make install
```
After the build process is finished, you can find the files ready to be installed inside `$HOME/kodi-rpi`. Look for a directory called `raspberry-pi-release` or `raspberry-pi2-release`.
**[back to top](#table-of-contents)**
|
