diff options
Diffstat (limited to 'src/benchmark/taler-benchmark-setup.sh')
| -rwxr-xr-x | src/benchmark/taler-benchmark-setup.sh | 152 |
1 files changed, 102 insertions, 50 deletions
diff --git a/src/benchmark/taler-benchmark-setup.sh b/src/benchmark/taler-benchmark-setup.sh index cd9153717..52e0e08bc 100755 --- a/src/benchmark/taler-benchmark-setup.sh +++ b/src/benchmark/taler-benchmark-setup.sh @@ -51,17 +51,17 @@ START_FAKEBANK=0 START_MERCHANT=0 START_NEXUS=0 START_SANDBOX=0 -CONF="~/.config/taler.conf" +CONF_ORIG="~/.config/taler.conf" LOGLEVEL="DEBUG" # Parse command-line options -while getopts ':abc:efl:ms' OPTION; do +while getopts ':abc:efhl:ms' OPTION; do case "$OPTION" in a) START_AUDITOR="1" ;; c) - CONF="$OPTARG" + CONF_ORIG="$OPTARG" ;; e) START_EXCHANGE="1" @@ -69,6 +69,19 @@ while getopts ':abc:efl:ms' OPTION; do f) START_FAKEBANK="1" ;; + h) + echo 'Supported options:' + echo ' -a -- start auditor' + echo ' -c $CONF -- set configuration' + echo ' -e -- start exchange' + echo ' -f -- start fakebank' + echo ' -h -- print this help' + echo ' -l $LOGLEVEL -- set log level' + echo ' -m -- start merchant' + echo ' -n -- start nexus' + echo ' -s -- start sandbox' + exit 0 + ;; l) LOGLEVEL="$OPTARG" ;; @@ -87,26 +100,29 @@ while getopts ':abc:efl:ms' OPTION; do esac done +echo "Starting with configuration file at: $CONF_ORIG" +CONF="$CONF_ORIG.edited" +cp "${CONF_ORIG}" "${CONF}" echo -n "Testing for jq" jq -h > /dev/null || exit_skip " jq required" echo " FOUND" -if ["1" = "$START_EXCHANGE"] +if [ "1" = "$START_EXCHANGE" ] then echo -n "Testing for Taler exchange" taler-exchange-httpd -h > /dev/null || exit_skip " taler-exchange-httpd required" echo " FOUND" fi -if ["1" = "$START_MERCHANT"] +if [ "1" = "$START_MERCHANT" ] then echo -n "Testing for Taler merchant" taler-merchant-httpd -h > /dev/null || exit_skip " taler-merchant-httpd required" echo " FOUND" fi -if ["1" = "$START_NEXUS"] +if [ "1" = "$START_NEXUS" ] then echo -n "Testing for libeufin-cli" libeufin-cli --help >/dev/null </dev/null || exit_skip " MISSING" @@ -114,7 +130,7 @@ then fi EXCHANGE_URL=$(taler-config -c "$CONF" -s "EXCHANGE" -o "BASE_URL") - +CURRENCY=$(taler-config -c "$CONF" -s "TALER" -o "CURRENCY") register_sandbox_account() { export LIBEUFIN_SANDBOX_USERNAME="$1" @@ -128,7 +144,7 @@ register_sandbox_account() { BANK_PORT=$(taler-config -c "$CONF" -s "BANK" -o "HTTP_PORT") -if ["1" = "$START_NEXUS"] +if [ "1" = "$START_NEXUS" ] then NEXUS_PORT="$BANK_PORT" SANDBOX_PORT="1$BANK_PORT" @@ -137,12 +153,11 @@ else SANDBOX_PORT="1$BANK_PORT" fi -if ["1" = "$START_SANDBOX"] +if [ "1" = "$START_SANDBOX" ] then export LIBEUFIN_SANDBOX_DB_CONNECTION=$(taler-config -c "$CONF" -s "libeufin-sandbox" -o "DB_CONNECTION") # Create the default demobank. - CURRENCY=$(taler-config -c "$CONF" -s "EXCHANGE" -o "CURRENCY") libeufin-sandbox config --currency "$CURRENCY" default export LIBEUFIN_SANDBOX_ADMIN_PASSWORD="secret" libeufin-sandbox serve \ @@ -152,6 +167,7 @@ then echo $! > libeufin-sandbox.pid export LIBEUFIN_SANDBOX_URL="http://localhost:$SANDBOX_PORT/" set +e + OK="0" echo -n "Waiting for Sandbox ..." for n in $(seq 1 100); do echo -n "." @@ -163,9 +179,14 @@ then -O /dev/null \ "$LIBEUFIN_SANDBOX_URL"; then + OK="1" break fi done + if [ "1" != "$OK" ] + then + exit_skip "Failed to launch services (sandbox)" + fi echo "OK" set -e echo -n "Register Sandbox users ..." @@ -208,7 +229,7 @@ then unset LIBEUFIN_SANDBOX_PASSWORD fi -if ["1" = "$START_NEXUS"] +if [ "1" = "$START_NEXUS" ] then echo "Setting up Nexus ..." @@ -228,6 +249,7 @@ then export LIBEUFIN_NEXUS_URL="http://localhost:$NEXUS_PORT" echo -n "Waiting for Nexus ..." set +e + OK="0" for n in $(seq 1 100); do echo -n "." sleep 0.2 @@ -238,9 +260,14 @@ then -O /dev/null \ "$LIBEUFIN_NEXUS_URL"; then + OK="1" break fi done + if [ "1" != "$OK" ] + then + exit_skip "Failed to launch services (bank)" + fi set -e echo " OK" @@ -296,14 +323,14 @@ then # FIXME: set the above URL automatically in the configuration? fi -if ["1" = "$START_FAKEBANK"] +if [ "1" = "$START_FAKEBANK" ] then echo "Setting up fakebank ..." taler-fakebank-run -c "$CONF" -L "$LOGLEVEL" 2> taler-fakebank-run.log & fi -if ["1" = "$START_EXCHANGE"] +if [ "1" = "$START_EXCHANGE" ] then echo -n "Starting exchange ..." @@ -313,9 +340,9 @@ then gnunet-ecc -g1 "$MASTER_PRIV_FILE" > /dev/null 2> /dev/null MASTER_PUB=$(gnunet-ecc -p "${MASTER_PRIV_FILE}") MPUB=$(taler-config -c "$CONF" -s exchange -o MASTER_PUBLIC_KEY) - if ["$MPUB" != "$MASTER_PUB"] + if [ "$MPUB" != "$MASTER_PUB" ] then - echo -n " patching master_pub ... " + echo -n " patching master_pub ($MASTER_PUB)..." taler-config -c $CONF -s exchange -o MASTER_PUBLIC_KEY -V "$MASTER_PUB" fi taler-exchange-dbinit -c "$CONF" @@ -329,7 +356,7 @@ then echo " DONE" fi -if ["1" = "$START_MERCHANT"] +if [ "1" = "$START_MERCHANT" ] then echo -n "Starting merchant ..." MERCHANT_PORT=$(taler-config -c "$CONF" -s MERCHANT -o PORT) @@ -340,7 +367,7 @@ then echo " DONE" fi -if ["1" = "$START_AUDITOR"] +if [ "1" = "$START_AUDITOR" ] then echo -n "Starting auditor ..." AUDITOR_URL="http://localhost:8083/" @@ -355,15 +382,15 @@ then echo " DONE" fi -if ["1" = "$START_NEXUS" || "1" = "$START_FAKEBANK"] +if [[ "1" = "$START_NEXUS" || "1" = "$START_FAKEBANK" ]] then echo -n "Waiting for the bank" # Wait for bank to be available (usually the slowest) + OK="0" for n in $(seq 1 300) do echo -n "." sleep 0.1 - OK=0 # bank wget --tries=1 \ --waitretry=0 \ @@ -373,34 +400,49 @@ then "http://localhost:8082/" \ -o /dev/null \ -O /dev/null >/dev/null || continue - OK=1 + OK="1" break done - if [ 1 != $OK ] + if [ "1" != "$OK" ] then exit_skip "Failed to launch services (bank)" fi echo " OK" fi -echo -n "Waiting for Taler services " +echo -n "Waiting for Taler services ..." # Wait for all other taler services to be available for n in $(seq 1 20) do echo -n "." sleep 0.1 OK="0" - if ["1" = "$START_EXCHANGE"] + if [ "1" = "$START_EXCHANGE" ] then - wget --tries=1 --timeout=1 http://localhost:8081/seed -o /dev/null -O /dev/null >/dev/null || continue + wget \ + --tries=1 \ + --timeout=1 \ + "http://localhost:8081/seed" \ + -o /dev/null \ + -O /dev/null >/dev/null || continue fi - if ["1" = "$START_MERCHANT"] + if [ "1" = "$START_MERCHANT" ] then - wget --tries=1 --timeout=1 http://localhost:9966/ -o /dev/null -O /dev/null >/dev/null || continue + wget \ + --tries=1 \ + --timeout=1 \ + "http://localhost:9966/" \ + -o /dev/null \ + -O /dev/null >/dev/null || continue fi - if ["1" = "$START_AUDITOR"] + if [ "1" = "$START_AUDITOR" ] then - wget --tries=1 --timeout=1 http://localhost:8083/ -o /dev/null -O /dev/null >/dev/null || continue + wget \ + --tries=1 \ + --timeout=1 \ + "http://localhost:8083/" \ + -o /dev/null \ + -O /dev/null >/dev/null || continue fi OK="1" break @@ -409,48 +451,55 @@ if [ 1 != "$OK" ] then exit_skip "Failed to launch (some) Taler services" fi -echo "OK" +echo " OK" -if ["1" = "$START_EXCHANGE"] +if [ "1" = "$START_EXCHANGE" ] then set +e - echo -n "Wait exchange /management/keys to be ready " + echo -n "Wait for exchange /management/keys to be ready " + OK="0" + LAST_RESPONSE=$(mktemp tmp-last-response.XXXXXXXX) for n in $(seq 1 50) do echo -n "." sleep 0.1 - OK=0 # exchange - wget --tries=3 --waitretry=0 --timeout=1 http://localhost:8081/management/keys -o /dev/null -O $LAST_RESPONSE >/dev/null + wget \ + --tries=3 \ + --waitretry=0 \ + --timeout=1 \ + "http://localhost:8081/management/keys"\ + -o /dev/null \ + -O "$LAST_RESPONSE" \ + >/dev/null DENOMS_COUNT=$(jq '.future_denoms|length' < $LAST_RESPONSE) SIGNKEYS_COUNT=$(jq '.future_signkeys|length' < $LAST_RESPONSE) [[ -z "$SIGNKEYS_COUNT" || "$SIGNKEYS_COUNT" == "0" || -z "$DENOMS_COUNT" || "$DENOMS_COUNT" == "0" ]] && continue - OK=1 + OK="1" break; done set -e - if [ 1 != $OK ] + if [ "1" != "$OK" ] then exit_skip "Failed to setup exchange keys, check secmod logs" fi + rm "$LAST_RESPONSE" echo " OK" echo -n "Setting up exchange keys ..." taler-exchange-offline -c "$CONF" \ download \ sign \ - enable-account "$EXCHANGE_PAYTO_URI" \ - enable-auditor $AUDITOR_PUB $AUDITOR_URL "TESTKUDOS Auditor" \ - wire-fee now iban TESTKUDOS:0.01 TESTKUDOS:0.01 \ - global-fee now TESTKUDOS:0.01 TESTKUDOS:0.01 TESTKUDOS:0.01 1h 1year 5 \ + wire-fee now iban "$CURRENCY:0.01" "$CURRENCY:0.01" \ + global-fee now "$CURRENCY:0.01" "$CURRENCY:0.01" "$CURRENCY:0.01" 1h 1year 5 \ upload &> taler-exchange-offline.log echo "OK" for ASEC in $(taler-config -c "$CONF" -S | grep -i "exchange-account-") do ENABLED=$(taler-config -c "$CONF" -s "$ASEC" -o "ENABLE_CREDIT") - if ["YES" = "$ENABLED"] + if [ "YES" = "$ENABLED" ] then - echo -n "Configuring bank account $ASEC" + echo -n "Configuring bank account $ASEC ..." EXCHANGE_PAYTO_URI=$(taler-config -c "$CONF" -s "$ASEC" -o "PAYTO_URI") taler-exchange-offline -c "$CONF" \ enable-account "$EXCHANGE_PAYTO_URI" \ @@ -458,34 +507,37 @@ then echo "OK" fi done - if ["1" = "$START_AUDITOR"] + if [ "1" = "$START_AUDITOR" ] then echo -n "Enabling auditor ..." taler-exchange-offline -c "$CONF" \ - enable-auditor $AUDITOR_PUB $AUDITOR_URL "TESTKUDOS Auditor" \ + enable-auditor $AUDITOR_PUB $AUDITOR_URL "$CURRENCY Auditor" \ upload &> taler-exchange-offline-auditor.log echo "OK" fi echo -n "Checking /keys " + OK="0" for n in $(seq 1 3) do echo -n "." - OK=0 - wget --tries=1 --timeout=1 \ - http://localhost:8081/keys \ - -o /dev/null -O /dev/null >/dev/null || continue - OK=1 + wget \ + --tries=1 \ + --timeout=1 \ + "http://localhost:8081/keys" \ + -o /dev/null \ + -O /dev/null >/dev/null || continue + OK="1" break done - if [ 1 != $OK ] + if [ "1" != "$OK" ] then exit_skip " Failed to setup keys" fi echo " OK" fi -if ["1" = "$START_AUDITOR"] +if [ "1" = "$START_AUDITOR" ] then echo -n "Setting up auditor signatures ..." taler-auditor-offline -c "$CONF" \ |