7 files changed, 271 insertions, 0 deletions
diff --git a/gmid/README b/gmid/README
new file mode 100644
index 0000000..cbd4fdc
--- /dev/null
+++ b/gmid/README
@@ -0,0 +1,19 @@
+gmid is a server for the Gemini protocol.  It has various features, among which
+Capsicum support and a "config-less" mode akin to "python -m http.server" to
+quickly serve local directories from the shell.
+
+This setup differs from the project's standard by avoiding to run the service
+as root.  It comes at the cost of not supporting 'chroot'.
+
+To have the gmid daemon start and stop with your host,
+add to /etc/rc.d/rc.local:
+
+  if [ -x /etc/rc.d/rc.gmid ]; then
+    /etc/rc.d/rc.gmid start
+  fi
+
+and to /etc/rc.d/rc.local_shutdown (creating it if needed):
+
+  if [ -x /etc/rc.d/rc.gmid ]; then
+    /etc/rc.d/rc.gmid stop
+  fi
diff --git a/gmid/doinst.sh b/gmid/doinst.sh
new file mode 100644
index 0000000..c94965b
--- /dev/null
+++ b/gmid/doinst.sh
@@ -0,0 +1,40 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  if [ -e $OLD ]; then
+    cp -a $OLD ${NEW}.incoming
+    cat $NEW > ${NEW}.incoming
+    mv ${NEW}.incoming $NEW
+  fi
+  config $NEW
+}
+
+
+if ! getent passwd gmid >/dev/null; then
+  useradd gmid \
+    --comment 'gmid gemini server' \
+    --user-group \
+    --system \
+    --home-dir /srv/gmid \
+    || true
+fi
+
+preserve_perms etc/rc.d/rc.gmid.new
+
+config etc/gmid/gmid.conf.new
+chown gmid:gmid etc/gmid/certs
+
+chown gmid:gmid var/log/gmid
diff --git a/gmid/files/gmid.conf.new b/gmid/files/gmid.conf.new
new file mode 100644
index 0000000..3b725ad
--- /dev/null
+++ b/gmid/files/gmid.conf.new
@@ -0,0 +1,24 @@
+log {
+  access /var/log/gmid/gmid.log
+}
+
+# An example of a server block:
+server "localhost" {
+	listen on * port 1965
+
+	# set the directory to serve
+	root "localhost"
+
+	# Set self-signed TLS cert and key.  It's better to keep
+	# the keys outside the chroot.
+        #
+        # sudo -u gmid -- \
+        #   openssl req -x509 \
+        #     -newkey rsa:4096 \
+        #     -nodes \
+        #     -out /etc/gmid/certs/localhost.crt \
+        #     -keyout /etc/gmid/certs/localhost.key \
+        #       -subj "/CN=localhost"
+	cert "/etc/gmid/certs/localhost.crt"
+	key  "/etc/gmid/certs/localhost.key"
+}
diff --git a/gmid/files/rc.gmid.new b/gmid/files/rc.gmid.new
new file mode 100644
index 0000000..33044b7
--- /dev/null
+++ b/gmid/files/rc.gmid.new
@@ -0,0 +1,56 @@
+#!/bin/sh
+#
+# Startup/shutdown script for the gmid gemini service.
+#
+
+create_run_dir() {
+  if [ ! -d /run/gmid/ ]; then
+    mkdir -p /run/gmid
+    chown :gmid /run/gmid
+    chmod g+wX /run/gmid
+  fi
+}
+
+start() {
+  echo "Starting gmid gemini service"
+  create_run_dir
+
+  sudo -u gmid -- gmid \
+      -c /etc/gmid/gmid.conf \
+      -P /run/gmid/gmid.pid
+}
+
+status() {
+  create_run_dir
+
+  if [ -f /run/gmid/gmid.pid ] && [ kill -0 "$(cat /run/gmid/gmid.pid)" >/dev/null ]; then
+    echo "gmid is running"
+  else
+    echo "gmid is not running"
+  fi
+}
+
+stop() {
+  echo "Stopping gmid gemini service"
+  create_run_dir
+
+  if [ -f /run/gmid/gmid.pid ]; then
+    sudo -u gmid -- kill -SIGINT "$(cat /run/gmid/gmid.pid)"
+  fi
+}
+
+case "$1" in
+start)
+  start
+  ;;
+status)
+  status
+  ;;
+stop)
+  stop
+  ;;
+*)
+  echo "Usage: $0 {start|stop|status}"
+  exit 1
+esac
+
diff --git a/gmid/gmid.SlackBuild b/gmid/gmid.SlackBuild
new file mode 100644
index 0000000..9c7169a
--- /dev/null
+++ b/gmid/gmid.SlackBuild
@@ -0,0 +1,101 @@
+#!/bin/bash
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PRGNAM=gmid
+VERSION=${VERSION:-2.1.1}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_slackcoder}
+PKGTYPE=${PKGTYPE:-txz}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+
+# Your application will probably need different configure flags;
+# these are provided as an example only.
+# Be sure to build only shared libraries unless there's some need for
+# static.
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --sysconfdir=/etc/gmid \
+  --mandir=/usr/man
+
+# Compile the application and install it into the $PKG directory
+make
+make install DESTDIR=$PKG
+
+# Don't ship .la files:
+rm -f $PKG/{,usr/}lib${LIBDIRSUFFIX}/*.la
+
+# Strip binaries and libraries - this can be done with 'make install-strip'
+# in many source trees, and that's usually acceptable if so, but if not,
+# use this:
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+# Compress man pages
+# If the man pages are installed to /usr/share/man instead, you'll need to either
+# add the --mandir=/usr/man flag to configure or move them manually after the
+# make install process is run.
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+cp -a \
+  ChangeLog \
+  LICENSE \
+  README.md \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cp "$CWD/README" "$PKG/usr/doc/$PRGNAM-$VERSION/README_slackware.md"
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+mkdir -p "$PKG/etc/gmid"
+mkdir -p "$PKG/etc/gmid/certs"
+cp -R "$CWD/files/gmid.conf.new" "$PKG/etc/gmid/"
+
+mkdir -p "$PKG/etc/rc.d"
+cp -R "$CWD/files/rc.gmid.new" "$PKG/etc/rc.d/"
+
+mkdir -p "$PKG/srv/gmid"
+
+mkdir -p "$PKG/var/log/gmid"
+chmod u=rwX,g=rX,o= "$PKG/var/log/gmid"
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE
diff --git a/gmid/gmid.info b/gmid/gmid.info
new file mode 100644
index 0000000..d1284c8
--- /dev/null
+++ b/gmid/gmid.info
@@ -0,0 +1,10 @@
+PRGNAM="gmid"
+VERSION="2.1.1"
+HOMEPAGE="https://gmid.omarpolo.com"
+DOWNLOAD="https://ftp.omarpolo.com/gmid-2.1.1.tar.gz"
+MD5SUM="fda53ff9cd666ca1de9c5f56511a3465"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="Slack Coder"
+EMAIL="slackcoder@server.ky"
diff --git a/gmid/slack-desc b/gmid/slack-desc
new file mode 100644
index 0000000..ee4bd53
--- /dev/null
+++ b/gmid/slack-desc
@@ -0,0 +1,21 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+        |-----handy-ruler------------------------------------------------------|
+gmid: gmid (Gemini server)
+gmid:
+gmid: gmid is a server for the Gemini protocol.  It has various
+gmid: features, among which Capsicum support and a "config-less"
+gmid: mode akin to "python -m http.server" to quickly serve local
+gmid: directories from the shell.
+gmid:
+gmid:
+gmid:
+gmid:
+gmid:
+gmid:
+gmid: