5 files changed, 237 insertions, 0 deletions
diff --git a/system/xssstate/README b/system/xssstate/README
new file mode 100644
index 0000000000..ac55532394
--- /dev/null
+++ b/system/xssstate/README
@@ -0,0 +1,11 @@
+xssstate
+--------
+
+This is the xssstate utility from suckless.org.
+
+This tool is a simple tool that retrieves the X screensaver state.
+This can be used in scripts that can start screen lockers, or
+other utilities.
+
+For more inforamtion on why this package exists, and for
+an example how to use it is detailed in the README.Slackware file.
diff --git a/system/xssstate/README.Slackware b/system/xssstate/README.Slackware
new file mode 100644
index 0000000000..d53c41923d
--- /dev/null
+++ b/system/xssstate/README.Slackware
@@ -0,0 +1,86 @@
+xssstate
+--------
+
+This is the xssstate utility from suckless.org.
+
+This tool is a simple tool that retrieves the X screensaver state.
+The screensaver states include the idle time, the screensaver state,
+and the time how long to wait until the screensaver should be active.
+
+The values for the screensaver states in X can be changed using
+xset(1).
+
+Turn off the screensaver:
+
+  % xset s 0
+  % xset s 0ff
+
+Turn on the screensaver after 60 seconds inactivity:
+
+  % xset s 60
+
+Force the screensaver to be active:
+
+  % xset s blank
+
+For more options, see xset(1).
+
+Why
+---
+
+I created this package, because I needed this one utility to control
+my screensaver and lock my screen with a simple tool.
+
+The same utility is bundled in the suckless-tools package on
+slackbuilds.org. If you need the other utilities in that package,
+you can use that. B. Watson did a nice job including these
+into one package.
+
+I did not have use for the other utilities in that package, and
+have created this package.
+
+Example usage
+-------------
+
+In the section below, an xss_idle.sh script is given. This script
+is an example on how to use this for a background service that
+will control your screensaver. This can be used to invoke xlock(1)
+using the following command.
+
+  % xss_idle.sh xlock &
+
+This can be usefull in your $HOME/.xinitrc file.
+
+You can also use slock, or any other utility that can lock the
+screen.
+
+Example script: xss_idle.sh
+---------------------------
+
+#!/bin/sh
+#
+# Use xset s $time to control the timeout when this will run.
+#
+
+if [ $# -lt 1 ];
+then
+  printf "usage: %s cmd\n" "$(basename $0)" 2>&1
+  exit 1
+fi
+cmd="$@"
+
+while true
+do
+  if [ $(xssstate -s) != "disabled" ];
+  then
+    tosleep=$(($(xssstate -t) / 1000))
+    if [ $tosleep -le 0 ];
+    then
+      $cmd
+    else
+      sleep $tosleep
+    fi
+  else
+    sleep 10
+  fi
+done
diff --git a/system/xssstate/slack-desc b/system/xssstate/slack-desc
new file mode 100644
index 0000000000..e7d5805c9b
--- /dev/null
+++ b/system/xssstate/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+        |-----handy-ruler------------------------------------------------------|
+xssstate: xssstate (utility from suckless.org)
+xssstate:
+xssstate: This is the tool to retrieve the X screensaver state.
+xssstate: This tool is from suckless.org.
+xssstate:
+xssstate:
+xssstate:
+xssstate:
+xssstate:
+xssstate:
+xssstate:
diff --git a/system/xssstate/xssstate.SlackBuild b/system/xssstate/xssstate.SlackBuild
new file mode 100644
index 0000000000..e77063258d
--- /dev/null
+++ b/system/xssstate/xssstate.SlackBuild
@@ -0,0 +1,111 @@
+#!/bin/bash
+
+# This script has been modified to only include the xssstate tool
+# from the suckless site.
+#
+# The original source belongs to B. Watson. I have made changes to
+# build only the xssstate utility.
+#
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PRGNAM=xssstate
+VERSION=${VERSION:-1.1}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+PKGTYPE=${PKGTYPE:-tgz}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+DOCDIR=$PKG/usr/doc/$PRGNAM-$VERSION
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT $DOCDIR
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+
+# some of the Makefiles expect these to already exist:
+mkdir -p $PKG/usr/bin $PKG/usr/man/man1
+
+chown -R root:root .
+find -L .  -perm /111 -a \! -perm 755 -a -exec chmod 755 {} \+ -o \
+        \! -perm /111 -a \! -perm 644 -a -exec chmod 644 {} \+
+
+sed -i -e "s,-O.\>,$SLKCFLAGS," -e "s,\<lib\>,lib$LIBDIRSUFFIX," config.mk
+
+make PREFIX=/usr MANPREFIX=/usr/man DESTDIR=$PKG install
+cp -a README LICENSE $DOCDIR
+cd -
+
+strip $PKG/usr/bin/*
+gzip -9 $PKG/usr/man/man?/*.?
+
+cat $CWD/$PRGNAM.SlackBuild > $DOCDIR/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE
+
+# Inform user that there is a xssstate already on the system and that this has
+# to be removed before installing this package
+path_to_utility="/usr/bin/xssstate"
+if [ -f ${path_to_utility} ]
+then
+  echo "******* IMPORTANT *******"
+  echo "There is already a utility with the name in ${path_to_utility}"
+  echo "Be sure to remove that utility by uninstalling its package."
+  echo "*************************"
+fi
diff --git a/system/xssstate/xssstate.info b/system/xssstate/xssstate.info
new file mode 100644
index 0000000000..69d2a22a3c
--- /dev/null
+++ b/system/xssstate/xssstate.info
@@ -0,0 +1,10 @@
+PRGNAM="xssstate"
+VERSION="1.1"
+HOMEPAGE="https://tools.suckless.org/x/xssstate/"
+DOWNLOAD="https://dl.suckless.org/tools/xssstate-1.1.tar.gz"
+MD5SUM="7d4935bc17b6f01afa12e420331fa688"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES=""
+MAINTAINER="R. Dindir"
+EMAIL="rdindir@yahoo.com"