5 files changed, 147 insertions, 0 deletions
diff --git a/system/sbotest/README b/system/sbotest/README
new file mode 100644
index 0000000000..122e48429b
--- /dev/null
+++ b/system/sbotest/README
@@ -0,0 +1,11 @@
+sbotest (sbotools-based reverse dependency build tester)
+
+sbotest uses the sbotools library and sbo-maintainer-tools to build and
+test SlackBuilds and their reverse dependencies (zero, one or all
+levels). Dry run and package archive features are included. Shared
+object dependency checks are available upon build failure.
+
+sbotest is intended to run in a clean-build environment, such as a
+virtual machine or Docker image. Because it calls useradd, groupadd and
+removepkg non-interactively, using sbotest on a general-purpose
+Slackware installation is not recommended.
diff --git a/system/sbotest/doinst.sh b/system/sbotest/doinst.sh
new file mode 100644
index 0000000000..2e7caffc6c
--- /dev/null
+++ b/system/sbotest/doinst.sh
@@ -0,0 +1,15 @@
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+config etc/sbotest/sbotest.conf.new
+config etc/sbotest/sbotest.hints.new
diff --git a/system/sbotest/sbotest.SlackBuild b/system/sbotest/sbotest.SlackBuild
new file mode 100644
index 0000000000..55c383e1c4
--- /dev/null
+++ b/system/sbotest/sbotest.SlackBuild
@@ -0,0 +1,92 @@
+#!/bin/bash
+#
+# Slackware build script for sbotest
+#
+# Copyright 2025 K. Eugene Carlson <kvngncrlsn@gmail.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PRGNAM=sbotest
+VERSION=${VERSION:-1.1.1}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+PKGTYPE=${PKGTYPE:-tgz}
+
+ARCH=noarch
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+mkdir -p $PKG/usr/sbin \
+         $PKG/usr/bin \
+         $PKG/usr/libexec/sbotest
+install -m 0755 bin/wrapper $PKG/usr/sbin/sbotest
+install -m 0755 bin/test $PKG/usr/libexec/sbotest
+install -m 0755 bin/pull $PKG/usr/libexec/sbotest
+(
+cd $PKG/usr/bin
+ln -s ../sbin/sbotest $PKG/usr/bin
+)
+
+mkdir -p $PKG/usr/man/man1
+install -m 0644 man1/* $PKG/usr/man/man1
+
+mkdir -p $PKG/etc/sbotest
+cp etc/sbotest.conf $PKG/etc/sbotest/sbotest.conf.new
+cp etc/sbotest.hints $PKG/etc/sbotest/sbotest.hints.new
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a LICENSE ACKNOWLEDGMENTS $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE
diff --git a/system/sbotest/sbotest.info b/system/sbotest/sbotest.info
new file mode 100644
index 0000000000..de9f20c1ce
--- /dev/null
+++ b/system/sbotest/sbotest.info
@@ -0,0 +1,10 @@
+PRGNAM="sbotest"
+VERSION="1.1.1"
+HOMEPAGE="https://pghvlaans.github.io/sbotools/sbotest/"
+DOWNLOAD="https://pghvlaans.github.io/sbotools/downloads/sbotest-1.1.1.tar.gz"
+MD5SUM="eb9601620d14b32ab3a2f9ba8ab029a0"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="sbo-maintainer-tools sbotools"
+MAINTAINER="K. Eugene Carlson"
+EMAIL="kvngncrlsn@gmail.com"
diff --git a/system/sbotest/slack-desc b/system/sbotest/slack-desc
new file mode 100644
index 0000000000..ea202f4fe9
--- /dev/null
+++ b/system/sbotest/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+       |-----handy-ruler------------------------------------------------------|
+sbotest: sbotest (sbotools-based reverse dependency build tester)
+sbotest:
+sbotest: sbotest uses the sbotools library and sbo-maintainer-tools to build
+sbotest: and test SlackBuilds and their reverse dependencies.
+sbotest:
+sbotest: sbotest is intended to be run in a clean build environment. Using
+sbotest: sbotest on a general-purpose Slackware installation is unsupported and
+sbotest: unadvisable.
+sbotest:
+sbotest: Homepage: https://pghvlaans.github.io/sbotools/sbotest/
+sbotest: Author: K. Eugene Carlson