system/openrc: Added (dependency-based init system).

Signed-off-by: Willy Sudiarto Raharjo <willysr@slackbuilds.org>

7 files changed, 193 insertions, 0 deletions

diff --git a/system/openrc/README b/system/openrc/README
new file mode 100644
index 000000000000..595317b16bdc
--- /dev/null
+++ b/system/openrc/README
@@ -0,0 +1,6 @@
+OpenRC is a dependency based init system that works with the system provided
+init program, normally /sbin/init (sysvinit in Slackware).
+
+For installation instructions see README.Slackware.
+
+For more information see http://docs.slackware.com/howtos:general_admin:openrc
diff --git a/system/openrc/README.Slackware b/system/openrc/README.Slackware
new file mode 100644
index 000000000000..2b9c375a1054
--- /dev/null
+++ b/system/openrc/README.Slackware
@@ -0,0 +1,8 @@
+Before installing OpenRC, the /etc/init.d folder would need to be moved out, ie:
+# mv /etc/init.d /etc/init.d.bak
+
+After installing, /etc/inittab would need to be replaced. The old one can be backed up:
+# cp /etc/inittab /etc/inittab.sysvinit
+# mv /etc/inittab.new /etc/inittab
+
+Services for OpenRC can be found in the openrc-services package.
diff --git a/system/openrc/doinst.sh b/system/openrc/doinst.sh
new file mode 100644
index 000000000000..b2fca4b27e38
--- /dev/null
+++ b/system/openrc/doinst.sh
@@ -0,0 +1,24 @@
+
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+    # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+BACKUP=(etc/inittab
+        etc/rc.conf
+	etc/conf.d/{bootmisc,consolefont,devfs,dmesg,fsck,hostname,hwclock,keymaps}
+	etc/conf.d/{killprocs,localmount,modules,netmount,network,staticroute}
+	etc/conf.d/{tmpfiles,urandom}
+	etc/logrotate.d/openrc)
+for file in "${BACKUP[@]}"; do
+  config ${file}.new
+done
+
diff --git a/system/openrc/openrc.SlackBuild b/system/openrc/openrc.SlackBuild
new file mode 100644
index 000000000000..2872b84c8cc3
--- /dev/null
+++ b/system/openrc/openrc.SlackBuild
@@ -0,0 +1,119 @@
+#!/bin/sh
+
+# Slackware build script for openrc
+# Based upon https://aur.archlinux.org/packages/openrc/
+
+# Copyright 2015 Aaditya Bagga <aaditya_gnulinux@zoho.com>
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=openrc
+VERSION=${VERSION:-0.16.3}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+[ -e "$CWD/$PRGNAM-$VERSION.tar.gz" ] && tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+[ -e "$CWD/$VERSION.tar.gz" ] && tar xvf $CWD/$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+MAKEARGS+=(PREFIX=/usr)
+MAKEARGS+=(LIBNAME=lib${LIBDIRSUFFIX})
+MAKEARGS+=(LIBDIR=/usr/lib${LIBDIRSUFFIX})
+MAKEARGS+=(LIBEXECDIR=/usr/libexec/rc)
+MAKEARGS+=(SYSCONFDIR=/etc)
+MAKEARGS+=(SBINDIR=/sbin)
+MAKEARGS+=(MANDIR=/usr/man)
+MAKEARGS+=(DOCDIR=/usr/doc/$PRGNAM-$VERSION)
+MAKEARGS+=(MKTERMCAP=ncurses)
+MAKEARGS+=(BRANDING='Slackware Linux')
+
+make "${MAKEARGS[@]}"
+
+make install "${MAKEARGS[@]}" DESTDIR=$PKG
+
+# Install inittab and logrotate files
+install -m 644 support/sysvinit/inittab "$PKG"/etc/inittab.new
+install -Dm 0644 "$CWD/$PRGNAM.logrotate" "$PKG/etc/logrotate.d/${PRGNAM}.new"
+
+# Correct sysctl
+sed -e 's|--system|-p|' -i "$PKG/etc/init.d/sysctl"
+
+# Backup rc.conf
+mv "$PKG/etc/rc.conf" "$PKG/etc/rc.conf.new"
+
+# Backup config files
+for file in "$PKG"/etc/conf.d/*; do
+  mv "${file}" "${file}.new"
+done
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a ChangeLog NEWS.md README.md README.newnet TODO $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/doinst.sh >> $PKG/install/doinst.sh
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/system/openrc/openrc.info b/system/openrc/openrc.info
new file mode 100644
index 000000000000..30b96ce2121c
--- /dev/null
+++ b/system/openrc/openrc.info
@@ -0,0 +1,10 @@
+PRGNAM="openrc"
+VERSION="0.16.3"
+HOMEPAGE="https://wiki.gentoo.org/wiki/Project:OpenRC"
+DOWNLOAD="https://github.com/OpenRC/openrc/archive/0.16.3.tar.gz"
+MD5SUM="75e5ef9c7e5e8ecfaae57742f0b4faea"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="%README%"
+MAINTAINER="Aaditya Bagga"
+EMAIL="aaditya_gnulinux@zoho.com"
diff --git a/system/openrc/openrc.logrotate b/system/openrc/openrc.logrotate
new file mode 100644
index 000000000000..a168f2361b38
--- /dev/null
+++ b/system/openrc/openrc.logrotate
@@ -0,0 +1,7 @@
+/var/log/rc.log {
+	compress
+	rotate 4
+	weekly
+	missingok
+	notifempty
+}
diff --git a/system/openrc/slack-desc b/system/openrc/slack-desc
new file mode 100644
index 000000000000..45db70a752c6
--- /dev/null
+++ b/system/openrc/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+      |-----handy-ruler------------------------------------------------------|
+openrc: openrc (dependency-based init system)
+openrc:
+openrc: OpenRC is a dependency-based init system that works
+openrc: with the system-provided init program, normally /sbin/init.
+openrc:
+openrc: OpenRC provides a number of features, such as hardware initiated
+openrc: initscript run and cgroups support, without requiring large layout
+openrc: changes to accommodate different designs and dependencies.
+openrc:
+openrc: Homepage: https://wiki.gentoo.org/wiki/Project:OpenRC
+openrc: