network/ipv6calc: Added (utility to convert IPv6 addresses)

Signed-off-by: dsomero <xgizzmo@slackbuilds.org>

4 files changed, 153 insertions, 0 deletions

diff --git a/network/ipv6calc/README b/network/ipv6calc/README
new file mode 100644
index 000000000000..c5060735ffc9
--- /dev/null
+++ b/network/ipv6calc/README
@@ -0,0 +1,16 @@
+ipv6calc is a small utility written in programming language C to
+manipulate (not only) IPv6 addresses. Intentions were converting a
+given IPv6 address into compressed format, converting a given IPv6
+address into the same format like shown in /proc/net/if_inet6 and
+(because it was not difficulty) migrating the Perl program ip6_int
+into. Now only one utility is needed to do a lot.
+
+This utility was also used in the past to extend features on
+network-functions-ipv6 library, used by initscripts-ipv6.
+
+To enable IP2Location support you will need to install C-Ip2location
+first, and then pass:
+
+  IP2LOCATION=yes
+
+to this Slackbuild.
diff --git a/network/ipv6calc/ipv6calc.SlackBuild b/network/ipv6calc/ipv6calc.SlackBuild
new file mode 100644
index 000000000000..c42fbcb8dd15
--- /dev/null
+++ b/network/ipv6calc/ipv6calc.SlackBuild
@@ -0,0 +1,108 @@
+#!/bin/sh
+
+# Slackware build script for ipv6calc
+
+# Copyright 2011  Chris Abela, Malta
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=ipv6calc
+VERSION=${VERSION:-0.90.0}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i486 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find . \
+ \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
+ -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
+ -exec chmod 644 {} \;
+
+if [ "$IP2LOCATION" = yes ]; then
+  ENABLE_IP2LOCATION="${ENABLE_IP2LOCATION:-"--enable-ip2location"}"
+else
+  # The default is to disable ip2location
+  unset ENABLE_IP2LOCATION
+fi
+
+CFLAGS="$SLKCFLAGS" \
+CXXFLAGS="$SLKCFLAGS" \
+./configure \
+  --prefix=/usr \
+  --bindir=/usr/bin \
+  --mandir=/usr/man \
+  $ENABLE_IP2LOCATION
+
+make
+make install DESTDIR=$PKG
+
+find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+# If you need more docs/scripts, have a look at the source,
+# I take a minimalist approach here.
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a \
+  COPYING CREDITS ChangeLog INSTALLING LICENSE README* TODO USAGE doc \
+  $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/network/ipv6calc/ipv6calc.info b/network/ipv6calc/ipv6calc.info
new file mode 100644
index 000000000000..c67f444ed09d
--- /dev/null
+++ b/network/ipv6calc/ipv6calc.info
@@ -0,0 +1,10 @@
+PRGNAM="ipv6calc"
+VERSION="0.90.0"
+HOMEPAGE="http://www.deepspace6.net/projects/ipv6calc.html"
+DOWNLOAD="ftp://ftp.bieringer.de/pub/linux/IPv6/ipv6calc/ipv6calc-0.90.0.tar.gz"
+MD5SUM="c1a654214058fdac5f8c2ba6a196e2b8"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+MAINTAINER="Chris Abela"
+EMAIL="chris.abela@maltats.com"
+APPROVED="dsomero"
diff --git a/network/ipv6calc/slack-desc b/network/ipv6calc/slack-desc
new file mode 100644
index 000000000000..7e4d4de3b14f
--- /dev/null
+++ b/network/ipv6calc/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|'
+# on the right side marks the last column you can put a character in.  You must
+# make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+        |-----handy-ruler-----------------------------------------------------|
+ipv6calc: ipv6calc (utility to convert IPv6 addresses)
+ipv6calc:
+ipv6calc: ipv6calc is a small utility written in programming language C to
+ipv6calc: manipulate (not only) IPv6 addresses. Intentions were converting a
+ipv6calc: given IPv6 address into compressed format, converting a given IPv6
+ipv6calc: address into the same format like shown in /proc/net/if_inet6 and
+ipv6calc: (because it was not difficulty) migrating the Perl program ip6_int
+ipv6calc: into. Now only one utitity is needed to do a lot.
+ipv6calc:
+ipv6calc:
+ipv6calc: Homepage: http://www.deepspace6.net/projects/ipv6calc.html