From 267caa0dc01dbfa715b43a9537a8d3e4dacb9422 Mon Sep 17 00:00:00 2001 From: Chris Abela Date: Sun, 3 Jul 2011 13:48:38 -0400 Subject: network/ipv6calc: Added (utility to convert IPv6 addresses) Signed-off-by: dsomero --- network/ipv6calc/README | 16 ++++++ network/ipv6calc/ipv6calc.SlackBuild | 108 +++++++++++++++++++++++++++++++++++ network/ipv6calc/ipv6calc.info | 10 ++++ network/ipv6calc/slack-desc | 19 ++++++ 4 files changed, 153 insertions(+) create mode 100644 network/ipv6calc/README create mode 100644 network/ipv6calc/ipv6calc.SlackBuild create mode 100644 network/ipv6calc/ipv6calc.info create mode 100644 network/ipv6calc/slack-desc (limited to 'network/ipv6calc') diff --git a/network/ipv6calc/README b/network/ipv6calc/README new file mode 100644 index 000000000000..c5060735ffc9 --- /dev/null +++ b/network/ipv6calc/README @@ -0,0 +1,16 @@ +ipv6calc is a small utility written in programming language C to +manipulate (not only) IPv6 addresses. Intentions were converting a +given IPv6 address into compressed format, converting a given IPv6 +address into the same format like shown in /proc/net/if_inet6 and +(because it was not difficulty) migrating the Perl program ip6_int +into. Now only one utility is needed to do a lot. + +This utility was also used in the past to extend features on +network-functions-ipv6 library, used by initscripts-ipv6. + +To enable IP2Location support you will need to install C-Ip2location +first, and then pass: + + IP2LOCATION=yes + +to this Slackbuild. diff --git a/network/ipv6calc/ipv6calc.SlackBuild b/network/ipv6calc/ipv6calc.SlackBuild new file mode 100644 index 000000000000..c42fbcb8dd15 --- /dev/null +++ b/network/ipv6calc/ipv6calc.SlackBuild @@ -0,0 +1,108 @@ +#!/bin/sh + +# Slackware build script for ipv6calc + +# Copyright 2011 Chris Abela, Malta +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=ipv6calc +VERSION=${VERSION:-0.90.0} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i486 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/$PRGNAM-$VERSION.tar.gz +cd $PRGNAM-$VERSION +chown -R root:root . +find . \ + \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \ + -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ + -exec chmod 644 {} \; + +if [ "$IP2LOCATION" = yes ]; then + ENABLE_IP2LOCATION="${ENABLE_IP2LOCATION:-"--enable-ip2location"}" +else + # The default is to disable ip2location + unset ENABLE_IP2LOCATION +fi + +CFLAGS="$SLKCFLAGS" \ +CXXFLAGS="$SLKCFLAGS" \ +./configure \ + --prefix=/usr \ + --bindir=/usr/bin \ + --mandir=/usr/man \ + $ENABLE_IP2LOCATION + +make +make install DESTDIR=$PKG + +find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +find $PKG/usr/man -type f -exec gzip -9 {} \; +for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done + +# If you need more docs/scripts, have a look at the source, +# I take a minimalist approach here. +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a \ + COPYING CREDITS ChangeLog INSTALLING LICENSE README* TODO USAGE doc \ + $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/network/ipv6calc/ipv6calc.info b/network/ipv6calc/ipv6calc.info new file mode 100644 index 000000000000..c67f444ed09d --- /dev/null +++ b/network/ipv6calc/ipv6calc.info @@ -0,0 +1,10 @@ +PRGNAM="ipv6calc" +VERSION="0.90.0" +HOMEPAGE="http://www.deepspace6.net/projects/ipv6calc.html" +DOWNLOAD="ftp://ftp.bieringer.de/pub/linux/IPv6/ipv6calc/ipv6calc-0.90.0.tar.gz" +MD5SUM="c1a654214058fdac5f8c2ba6a196e2b8" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +MAINTAINER="Chris Abela" +EMAIL="chris.abela@maltats.com" +APPROVED="dsomero" diff --git a/network/ipv6calc/slack-desc b/network/ipv6calc/slack-desc new file mode 100644 index 000000000000..7e4d4de3b14f --- /dev/null +++ b/network/ipv6calc/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler-----------------------------------------------------| +ipv6calc: ipv6calc (utility to convert IPv6 addresses) +ipv6calc: +ipv6calc: ipv6calc is a small utility written in programming language C to +ipv6calc: manipulate (not only) IPv6 addresses. Intentions were converting a +ipv6calc: given IPv6 address into compressed format, converting a given IPv6 +ipv6calc: address into the same format like shown in /proc/net/if_inet6 and +ipv6calc: (because it was not difficulty) migrating the Perl program ip6_int +ipv6calc: into. Now only one utitity is needed to do a lot. +ipv6calc: +ipv6calc: +ipv6calc: Homepage: http://www.deepspace6.net/projects/ipv6calc.html -- cgit v1.2.3