aboutsummaryrefslogtreecommitdiff
path: root/hw
AgeCommit message (Collapse)Author
2011-01-31blockdev: Fix regression in -drive if=scsi,index=NMarkus Armbruster
Before commit 622b520f, index=12 meant bus=1,unit=5. Since the commit, it means bus=0,unit=12. The drive is created, but not the guest device. That's because the controllers we use with if=scsi drives (lsi53c895a and esp) support only 7 units, and scsi_bus_legacy_handle_cmdline() ignores drives with unit numbers exceeding that limit. Changing the mapping of index to bus, unit is a regression. Breaking -drive invocations that used to work just makes it worse. Revert the part of commit 622b520f that causes this, and clean up some. Note that the fix only affects if=scsi. You can still put more than 7 units on a SCSI bus with -device & friends. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-31blockdev: New drive_get_next(), replacing qdev_init_bdrv()Markus Armbruster
qdev_init_bdrv() doesn't belong into qdev.c; it's about drives, not qdevs. Rename to drive_get_next, move to blockdev.c, drop the bogus DeviceState argument, and return DriveInfo instead of BlockDriverState. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-31scsi hotplug: Set DriveInfo member bus correctlyMarkus Armbruster
drive_init() picks the first free bus and unit number, unless the user specifies them. This isn't a good fit for the drive_add monitor command, because there we specify the controller by PCI address instead of using bus number set by drive_init(). scsi_hot_add() takes care to replace the unit number set by drive_init() by the real one, but it neglects to replace the bus number. Thus, bus/unit in DriveInfo may be bogus. Affects drive_get() and drive_get_max_bus(). I'm not aware of anything bad happening because of that; looks like by the time we're hot-plugging, the two functions aren't used anymore. Fix it anyway. Signed-off-by: Markus Armbruster <armbru@redhat.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-31ahci: Fix cpu_physical_memory_unmap() argument orderingStefan Hajnoczi
The len and is_write arguments to cpu_physical_memory_unmap() were swapped. This patch changes calls to use the correct argument ordering. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-31virtio-blk: tell the guest about size changesChristoph Hellwig
Raise a config change interrupt when the size changed. This allows virtio-blk guest drivers to read-read the information from the config space once it got the config chaged interrupt. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-31block: tell drivers about an image resizeChristoph Hellwig
Extend the change_cb callback with a reason argument, and use it to tell drivers about size changes. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-29prep: Disable second IDE channel, as long as ISA IDE emulation doesn't ↵Hervé Poussineau
support same irq for both channels Cc: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-29prep: Remove bogus BIOS size checkAndreas Färber
r3480 added this check to account for the entry vector 0xfff00100 to be available for CPUs that need it. Today however, the NIP is not yet initialized at this point (zero), so the check always triggers. Moreover, BIOS size check is already done previously, so this part can be removed too. Cc: Alexander Graf <agraf@suse.de> Signed-off-by: Andreas Färber <andreas.faerber@web.de> Signed-off-by: Hervé Poussineau <hpoussin@reactos.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-29mc146818rtc: update registers after a format changeAurelien Jarno
For some unknown reason, the MIPS kernel briefly changes the RTC to binary mode during boot, switch back to BCD mode and read the time. As the registers are updated only every second, they may still be in the old format when they are read. This patch forces a register update immediately after a format change (BCD/binary or 12/24H). This avoid long fsck during boot due to time wrap. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-29mc146818rtc: constantifyAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-29virtio-blk: fix cross-endianness targetsAurelien Jarno
virtio-blk doesn't work on cross-endian configuration, as endianness is not handled correctly. This patch adds missing endianness conversions to make virtio-blk working. Tested on the following configurations: - i386 guest on x86_64 host - ppc guest on x86_64 host - i386 guest on mips host - ppc guest on mips host Reviewed-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-29virtio-net: fix cross-endianness supportAurelien Jarno
virtio-net used to work on cross-endianness configurations, but doesn't anymore with recent guest kernels, as the new features don't handle endianness correctly. This patch fixes wrong conversion, and add missing ones to make virtio-net working. Tested on the following configurations: - i386 guest on x86_64 host - ppc guest on x86_64 host - i386 guest on mips host - ppc guest on mips host Cc: Anthony Liguori <aliguori@us.ibm.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-29escc: fix interrupt flagsAurelien Jarno
Recent PowerPC kernel end up in kernel panic during boot in -nographic mode. In this mode the second serial port is used as the udbg console, and thus a few characters are sent on this port. This activates the tx interrupt flag, and later choke the Linux kernel, as it was not expecting such a flag to be set. The problem here comes from the fact that contrary to most devices the interrupt flags are only set if the interrupt is enabled. Quoting the datasheet: "If the corresponding IE bit is not set, the IP for that source of interrupt will never be set." This patch fixes that by enabling the interrupt flag only when the corresponding interrupt is enabled. Cc: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-29pxa2xx_gpio: switch to using qdevDmitry Eremin-Solenikov
As noted by Markus Armbruster pxa2xx_gpio vmstate version bumped because of a change in the or .ilevel / .olevel arrays are saved, for convenience. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-01-29spitz: make spitz-keyboard to use qdev infrastructureDmitry Eremin-Solenikov
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-01-29spitz: make sl-nand emulation use qdev infrastructureDmitry Eremin-Solenikov
Switch sl-nand emulation to use qdev and vmstate. Also drop ecc_get/_put functions as sl-nand was the only user of that code. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-01-29Use vmstate to save/load spitz-lcdtg and corgi-ssp stateDmitry Eremin-Solenikov
Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-01-29SharpSL scoop device - convert to qdevDmitry Eremin-Solenikov
Convert SharpSL scoop device to qdev, remove lots of supporting code, as lot of init and gpio related things can now be done automagically. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Andrzej Zaborowski <andrew.zaborowski@intel.com>
2011-01-26sh4: implement missing mmaped TLB read functionsAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-26sh4: implement missing mmaped TLB write functionsAurelien Jarno
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-26etrax: Dont decrease the granularity of timersEdgar E. Iglesias
Signed-off-by: Edgar E. Iglesias <edgar.iglesias@gmail.com>
2011-01-25mips_fulong: remove bogus HAS_AUDIOIsaku Yamahata
remove bogus HAS_AUDIO according to 738012bec4c67e697e766edadab3f522c552a04d. Cc: Blue Swirl <blauwirbel@gmail.com> Cc: Huacai Chen <zltjiangshi@gmail.com> Cc: Aurelien Jarno <aurelien@aurel32.net> Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-25audio: consolidate audio_init()Isaku Yamahata
consolidate audio_init() and remove references to shoundhw. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Acked-by: Blue Swirl <blauwirbel@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-24Merge remote branch 'kwolf/for-anthony' into stagingAnthony Liguori
2011-01-24SPARC: Emulation of Leon3Fabien Chouteau
Leon3 is an open-source VHDL System-On-Chip, well known in space industry (more information on http://www.gaisler.com). Leon3 is made of multiple components available in the GrLib VHDL library. Three devices are implemented: uart, timers and IRQ manager. You can find code for these peripherals in the grlib_* files. Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-24SPARC: Emulation of GRLIB APB UARTFabien Chouteau
This device exposes one parameter: - chardev (ptr) : Pointer to a qemu character device Emulation of GrLib devices is base on the GRLIB IP Core User's Manual: http://www.gaisler.com/products/grlib/grip.pdf Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-24SPARC: Emulation of GRLIB IRQMPFabien Chouteau
This device exposes two parameters: - set_pil_in (ptr) : A function to set the pil_in of the SPARC CPU - set_pil_in_opaque (ptr) : Opaque argument of the set_pil_in function Emulation of GrLib devices is base on the GRLIB IP Core User's Manual: http://www.gaisler.com/products/grlib/grip.pdf Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-24SPARC: Emulation of GRLIB GPTimerFabien Chouteau
This device exposes three parameters: - frequency (uint32) : The system frequency - irq-line (uint32) : IRQ line number for the first timer (others use irq-line + 1, irq-line + 2...) - nr-timers (uint32) : Number of timers Emulation of GrLib devices is base on the GRLIB IP Core User's Manual: http://www.gaisler.com/products/grlib/grip.pdf Signed-off-by: Fabien Chouteau <chouteau@adacore.com> Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-24usb-msd: Propagate removable bit to SCSI deviceStefan Hajnoczi
USB Mass Storage Devices sometimes have the RMB (removable) bit set in the SCSI INQUIRY response. Thumbdrives tend to have the bit set whereas hard disks do not. Operating systems differentiate between removable devices and fixed devices. Under Linux, the anaconda installer looks for removable devices. Under Windows, only fixed devices may have more than one partition and AutoRun is also affected by the removable bit. For these reasons, allow USB Mass Storage Devices to override the removable bit: qemu -usb -drive if=none,file=test.img,cache=none,id=disk0 -device usb-storage,drive=disk0,removable=on The default is off. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24scsi: Allow scsi_bus_legacy_add_drive() to set removable bitStefan Hajnoczi
scsi-disk devices may wish to override the removable bit. Add support for a qdev property on SCSI devices. This is will be used by usb-msd. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24scsi-disk: Allow overriding SCSI INQUIRY removable bitStefan Hajnoczi
Provide the "removable" qdev property bit to override the SCSI INQUIRY removable (RMB) bit for non-CDROM devices. This will be used by USB Mass Storage Devices, which sometimes have this guest-visible bit set and sometimes do not. They therefore requires a means for user configuration. Signed-off-by: Stefan Hajnoczi <stefanha@linux.vnet.ibm.com> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24ide: Remove unneeded null pointer checkStefan Weil
With bm == NULL, other code in the same function would crash. This bug was reported by cppcheck: hw/ide/pci.c:280: error: Possible null pointer dereference: bm Cc: Michael S. Tsirkin <mst@redhat.com> Signed-off-by: Stefan Weil <weil@mail.berlios.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24ide: kill ide_dma_submit_checkChristoph Hellwig
Merge ide_dma_submit_check into it's only caller. Also use tail recursion using a goto instead of a real recursion - this avoid overflowing the stack in the pathological situation of an recurring error that is ignored. We'll still be busy looping in ide_dma_cb, but at least won't eat up all stack space after this. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24ide: also reset io_buffer_index for writesChristoph Hellwig
Currenly the code only resets the io_buffer_index field for reads, but the code seems to expect this for all types of I/O. I guess we simply don't hit large enough transfers that would require this often enough. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-24ide: factor dma handling helpersChristoph Hellwig
Factor the DMA I/O path that is duplicated between read and write commands, into common helpers using the s->is_read flag added for the macio ATA controller. Signed-off-by: Christoph Hellwig <hch@lst.de> Signed-off-by: Kevin Wolf <kwolf@redhat.com>
2011-01-23multiboot: Fix upper memory size in multiboot infoKevin Wolf
The upper memory size field should exclude the first MB of RAM. Signed-off-by: Kevin Wolf <mail@kevin-wolf.de> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-23Delete useless 'extern' qualifiers for functionsBlue Swirl
'extern' qualifier is useless for function declarations. Delete them. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2011-01-21Merge branch 'usb.4' of git://anongit.freedesktop.org/spice/qemuAurelien Jarno
* 'usb.4' of git://anongit.freedesktop.org/spice/qemu: (32 commits) usb: zap pdev from usbport usb: rewrite fw path, fix numbering usb: add port property. usb: keep track of physical port address. usb storage: handle long responses usb storage: fix status reporting usb storage: high speed support usb: add device qualifier support usb: add usb_desc_attach usb: add attach callback usb: add speed mask to ports usb: hid: change serial number to "42". usb: hid: remote wakeup support. usb: hub: remote wakeup support. usb: uhci: remote wakeup support. usb: add usb_wakeup() + wakeup callback to port ops usb: rework attach/detach workflow usb: create USBPortOps, move attach there. usb: move remote wakeup handling to common code usb: move USB_REQ_{GET,SET}_CONFIGURATION handling to common code ...
2011-01-21sm501: fix screen redrawAurelien Jarno
Due to signed/unsigned comparison, the dirty bits are never reset, and the screen redrawn each time. Fix that by only using ram_addr_t types, and looking for page_min != addr_max instead. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-20gt64xxx: set isa_mem_base during registrationAurelien Jarno
isa_mem_base is computed from registers during reset, but due to QEMU limitations some devices (e.g. VGA card) need to know it earlier when they are registered. Workaround this by setting the value during registration instead of reset. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-20hw/pl190.c: Fix writing of default vector addressPeter Maydell
The PL190 implementation keeps the default vector address in vect_addr[16], but we weren't using this for writes to the DEFVECTADDR register. As a result of this fix the default_addr structure member is unused and we can delete it. Reported-by: Himanshu Chauhan <hschauhan@nulltrace.org> Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-20Merge remote branch 'mst/for_anthony' into stagingAnthony Liguori
2011-01-20pci: use qemu_malloc() in pcibus_get_dev_path()Isaku Yamahata
use qemu_malloc() instead of direct use of malloc(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-01-20msix: simplify write configIsaku Yamahata
use pci_device_deassert_intx(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-01-20msi: simplify write config a bit.Isaku Yamahata
use pci_device_deassert_intx(). Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-01-20pci: deassert intx on reset.Isaku Yamahata
deassert intx on device reset. So far pci_device_reset() is used for system reset. In that case, interrupt controller is reset at the same time so that all irq is are deasserted. But now pci bus reset/flr is supported, and in that case irq needs to be disabled explicitly. Signed-off-by: Isaku Yamahata <yamahata@valinux.co.jp> Signed-off-by: Michael S. Tsirkin <mst@redhat.com>
2011-01-20pxa2xx_lcd: restore updating of displayDmitry Eremin-Solenikov
Recently PXA2xx lcd have stopped to be updated incrementally (picture frozen). This patch fixes that by passing non min/max x/y, but rather (correctly) x/y and w/h. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-20pxa2xx: fix vmstate_pxa2xx_i2cDmitry Eremin-Solenikov
vmstate_pxa2xx_i2c incorrectly recursed to itself instead of going to store slave device. Fix that stop stop qemu from segfaulting during savevm for pxa2xx-based devices. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-20scoop: fix access to registers from second instanceDmitry Eremin-Solenikov
Second instance of scoop contains registers shifted to 0x40 from the start of the page. Instead of messing with register mapping, just limit register address to 0x00..0x3f. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
2011-01-20mainstone: fix name of the allocated memory for romsDmitry Eremin-Solenikov
Mainstone board has two flash chips (emulated by two ram regions), however currently code tries to allocate them with the same name, which fails. Fix that to make mainstone emulation work again. Signed-off-by: Dmitry Eremin-Solenikov <dbaryshkov@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net>
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-22 20:00:07 +0000