aboutsummaryrefslogtreecommitdiff
path: root/hw/riscv/spike.c
AgeCommit message (Collapse)Author
2024-02-09target/riscv: support new isa extension detection devicetree propertiesConor Dooley
A few months ago I submitted a patch to various lists, deprecating "riscv,isa" with a lengthy commit message [0] that is now commit aeb71e42caae ("dt-bindings: riscv: deprecate riscv,isa") in the Linux kernel tree. Primarily, the goal was to replace "riscv,isa" with a new set of properties that allowed for strictly defining the meaning of various extensions, where "riscv,isa" was tied to whatever definitions inflicted upon us by the ISA manual, which have seen some variance over time. Two new properties were introduced: "riscv,isa-base" and "riscv,isa-extensions". The former is a simple string to communicate the base ISA implemented by a hart and the latter an array of strings used to communicate the set of ISA extensions supported, per the definitions of each substring in extensions.yaml [1]. A beneficial side effect was also the ability to define vendor extensions in a more "official" way, as the ISA manual and other RVI specifications only covered the format for vendor extensions in the ISA string, but not the meaning of vendor extensions, for obvious reasons. Add support for setting these two new properties in the devicetrees for the various devicetree platforms supported by QEMU for RISC-V. The Linux kernel already supports parsing ISA extensions from these new properties, and documenting them in the dt-binding is a requirement for new extension detection being added to the kernel. A side effect of the implementation is that the meaning for elements in "riscv,isa" and in "riscv,isa-extensions" are now tied together as they are constructed from the same source. The same applies to the ISA string provided in ACPI tables, but there does not appear to be any strict definitions of meanings in ACPI land either. Link: https://lore.kernel.org/qemu-riscv/20230702-eats-scorebook-c951f170d29f@spud/ [0] Link: https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/Documentation/devicetree/bindings/riscv/extensions.yaml [1] Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Andrew Jones <ajones@ventanamicro.com> Signed-off-by: Conor Dooley <conor.dooley@microchip.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-ID: <20240124-unvarying-foothold-9dde2aaf95d4@spud> [ Changes by AF: - Rebase on recent changes ] Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-06-26hw/riscv: Validate cluster and NUMA node boundaryGavin Shan
There are two RISCV machines where NUMA is aware: 'virt' and 'spike'. Both of them are required to follow cluster-NUMA-node boundary. To enable the validation to warn about the irregular configuration where multiple CPUs in one cluster has been associated with multiple NUMA nodes. Signed-off-by: Gavin Shan <gshan@redhat.com> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Acked-by: Igor Mammedov <imammedo@redhat.com> Acked-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230509002739.18388-4-gshan@redhat.com> Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>
2023-05-05hw/riscv: Add signature dump function for spike to run ACT testsWeiwei Li
Add signature and signature-granularity properties in spike to specify the target signatrue file and the line size for signature data. Recgonize the signature section between begin_signature and end_signature symbols when loading elf of ACT tests. Then dump signature data in signature section just before the ACT tests exit. Signed-off-by: Weiwei Li <liweiwei@iscas.ac.cn> Signed-off-by: Junqiang Wang <wangjunqiang@iscas.ac.cn> Reviewed-by: LIU Zhiwei <zhiwei_liu@linux.alibaba.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230405095720.75848-2-liweiwei@iscas.ac.cn> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-16hw/riscv/boot.c: consolidate all kernel init in riscv_load_kernel()Daniel Henrique Barboza
The microchip_icicle_kit, sifive_u, spike and virt boards are now doing the same steps when '-kernel' is used: - execute load_kernel() - load init_rd() - write kernel_cmdline Let's fold everything inside riscv_load_kernel() to avoid code repetition. To not change the behavior of boards that aren't calling riscv_load_init(), add an 'load_initrd' flag to riscv_load_kernel() and allow these boards to opt out from initrd loading. Cc: Palmer Dabbelt <palmer@dabbelt.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Message-Id: <20230206140022.2748401-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-16hw/riscv: handle 32 bit CPUs kernel_entry in riscv_load_kernel()Daniel Henrique Barboza
Next patch will move all calls to riscv_load_initrd() to riscv_load_kernel(). Machines that want to load initrd will be able to do via an extra flag to riscv_load_kernel(). This change will expose a sign-extend behavior that is happening in load_elf_ram_sym() when running 32 bit guests [1]. This is currently obscured by the fact that riscv_load_initrd() is using the return of riscv_load_kernel(), defined as target_ulong, and this return type will crop the higher 32 bits that would be padded with 1s by the sign extension when running in 32 bit targets. The changes to be done will force riscv_load_initrd() to use an uint64_t instead, exposing it to the padding when dealing with 32 bit CPUs. There is a discussion about whether load_elf_ram_sym() should or should not sign extend the value returned by 'lowaddr'. What we can do is to prevent the behavior change that the next patch will end up doing. riscv_load_initrd() wasn't dealing with 64 bit kernel entries when running 32 bit CPUs, and we want to keep it that way. One way of doing it is to use target_ulong in 'kernel_entry' in riscv_load_kernel() and rely on the fact that this var will not be sign extended for 32 bit targets. Another way is to explictly clear the higher 32 bits when running 32 bit CPUs for all possibilities of kernel_entry. We opted for the later. This will allow us to be clear about the design choices made in the function, while also allowing us to add a small comment about what load_elf_ram_sym() is doing. With this change, the consolation patch can do its job without worrying about unintended behavioral changes. [1] https://lists.gnu.org/archive/html/qemu-devel/2023-01/msg02281.html Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230206140022.2748401-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Palmer Dabbelt <palmer@rivosinc.com>
2023-02-07hw/riscv: change riscv_compute_fdt_addr() semanticsDaniel Henrique Barboza
As it is now, riscv_compute_fdt_addr() is receiving a dram_base, a mem_size (which is defaulted to MachineState::ram_size in all boards) and the FDT pointer. And it makes a very important assumption: the DRAM interval dram_base + mem_size is contiguous. This is indeed the case for most boards that use a FDT. The Icicle Kit board works with 2 distinct RAM banks that are separated by a gap. We have a lower bank with 1GiB size, a gap follows, then at 64GiB the high memory starts. MachineClass::default_ram_size for this board is set to 1.5Gb, and machine_init() is enforcing it as minimal RAM size, meaning that there we'll always have at least 512 MiB in the Hi RAM area. Using riscv_compute_fdt_addr() in this board is weird because not only the board has sparse RAM, and it's calling it using the base address of the Lo RAM area, but it's also using a mem_size that we have guarantees that it will go up to the Hi RAM. All the function assumptions doesn't work for this board. In fact, what makes the function works at all in this case is a coincidence. Commit 1a475d39ef54 introduced a 3GB boundary for the FDT, down from 4Gb, that is enforced if dram_base is lower than 3072 MiB. For the Icicle Kit board, memmap[MICROCHIP_PFSOC_DRAM_LO].base is 0x80000000 (2 Gb) and it has a 1Gb size, so it will fall in the conditions to put the FDT under a 3Gb address, which happens to be exactly at the end of DRAM_LO. If the base address of the Lo area started later than 3Gb this function would be unusable by the board. Changing any assumptions inside riscv_compute_fdt_addr() can also break it by accident as well. Let's change riscv_compute_fdt_addr() semantics to be appropriate to the Icicle Kit board and for future boards that might have sparse RAM topologies to worry about: - relieve the condition that the dram_base + mem_size area is contiguous, since this is already not the case today; - receive an extra 'dram_size' size attribute that refers to a contiguous RAM block that the board wants the FDT to reside on. Together with 'mem_size' and 'fdt', which are now now being consumed by a MachineState pointer, we're able to make clear assumptions based on the DRAM block and total mem_size available to ensure that the FDT will be put in a valid RAM address. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230201171212.1219375-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07hw/riscv: split fdt address calculation from fdt loadDaniel Henrique Barboza
A common trend in other archs is to calculate the fdt address, which is usually straightforward, and then calling a function that loads the fdt/dtb by using that address. riscv_load_fdt() is doing a bit too much in comparison. It's calculating the fdt address via an elaborated heuristic to put the FDT at the bottom of DRAM, and "bottom of DRAM" will vary across boards and configurations, then it's actually loading the fdt, and finally it's returning the fdt address used to the caller. Reduce the existing complexity of riscv_load_fdt() by splitting its code into a new function, riscv_compute_fdt_addr(), that will take care of all fdt address logic. riscv_load_fdt() can then be a simple function that just loads a fdt at the given fdt address. We're also taken the opportunity to clarify the intentions and assumptions made by these functions. riscv_load_fdt() is now receiving a hwaddr as fdt_addr because there is no restriction of having to load the fdt in higher addresses that doesn't fit in an uint32_t. Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230201171212.1219375-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-02-07hw/riscv/spike.c: rename MachineState 'mc' pointers to' ms'Daniel Henrique Barboza
Follow the QEMU convention of naming MachineState pointers as 'ms' by renaming the instances where we're calling it 'mc'. Suggested-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20230124212234.412630-4-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-20hw/riscv: use ms->fdt in riscv_socket_fdt_write_distance_matrix()Daniel Henrique Barboza
There's no need to use a MachineState pointer and a fdt pointer now that all RISC-V machines are using the FDT from the MachineState. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230111170948.316276-7-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-20hw/riscv: use MachineState::fdt in riscv_socket_fdt_write_id()Daniel Henrique Barboza
There's no need to use a MachineState pointer and a fdt pointer now that all RISC-V machines are using the FDT from the MachineState. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230111170948.316276-6-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-20hw/riscv/spike.c: simplify create_fdt()Daniel Henrique Barboza
'mem_size' and 'cmdline' are unused. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230111170948.316276-2-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-20hw/riscv/boot.c: use MachineState in riscv_load_kernel()Daniel Henrique Barboza
All callers are using kernel_filename as machine->kernel_filename. This will also simplify the changes in riscv_load_kernel() that we're going to do next. Cc: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230102115241.25733-10-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-20hw/riscv/boot.c: use MachineState in riscv_load_initrd()Daniel Henrique Barboza
'filename', 'mem_size' and 'fdt' from riscv_load_initrd() can all be retrieved by the MachineState object for all callers. Cc: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230102115241.25733-9-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-20hw/riscv: write bootargs 'chosen' FDT after riscv_load_kernel()Daniel Henrique Barboza
The sifive_u, spike and virt machines are writing the 'bootargs' FDT node during their respective create_fdt(). Given that bootargs is written only when '-append' is used, and this option is only allowed with the '-kernel' option, which in turn is already being check before executing riscv_load_kernel(), write 'bootargs' in the same code path as riscv_load_kernel(). Cc: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230102115241.25733-8-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-20hw/riscv: write initrd 'chosen' FDT inside riscv_load_initrd()Daniel Henrique Barboza
riscv_load_initrd() returns the initrd end addr while also writing a 'start' var to mark the addr start. These informations are being used just to write the initrd FDT node. Every existing caller of riscv_load_initrd() is writing the FDT in the same manner. We can simplify things by writing the FDT inside riscv_load_initrd(), sparing callers from having to manage start/end addrs to write the FDT themselves. An 'if (fdt)' check is already inserted at the end of the function because we'll end up using it later on with other boards that doesn´t have a FDT. Cc: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20230102115241.25733-7-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-20hw/riscv/spike.c: load initrd right after riscv_load_kernel()Daniel Henrique Barboza
This will make the code more in line with what the other boards are doing. We'll also avoid an extra check to machine->kernel_filename since we already checked that before executing riscv_load_kernel(). Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Message-Id: <20230102115241.25733-6-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-20hw/riscv/spike: use 'fdt' from MachineStateDaniel Henrique Barboza
The MachineState object provides a 'fdt' pointer that is already being used by other RISC-V machines, and it's also used by the 'dumpdtb' QMP command. Remove the 'fdt' pointer from SpikeState and use MachineState::fdt instead. Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Message-Id: <20230102115241.25733-3-dbarboza@ventanamicro.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-20hw/riscv: spike: Decouple create_fdt() dependency to ELF loadingBin Meng
At present create_fdt() calls htif_uses_elf_symbols() to determine whether to insert a <reg> property for the HTIF. This unfortunately creates a hidden dependency to riscv_load_{firmware,kernel} that create_fdt() must be called after the ELF {firmware,kernel} image has been loaded. Decouple such dependency be adding a new parameter to create_fdt(), whether custom HTIF base address is used. The flag will be set if non ELF {firmware,kernel} image is given by user. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Message-Id: <20221229091828.1945072-13-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-20hw/riscv/boot.c: introduce riscv_default_firmware_name()Daniel Henrique Barboza
Some boards are duplicating the 'riscv_find_and_load_firmware' call because the 32 and 64 bits images have different names. Create a function to handle this detail instead of hardcoding it in the boards. Ideally we would bake this logic inside riscv_find_and_load_firmware(), or even create a riscv_load_default_firmware(), but at this moment we cannot infer whether the machine is running 32 or 64 bits without accessing RISCVHartArrayState, which in turn can't be accessed via the common code from boot.c. In the end we would exchange 'firmware_name' for a flag with riscv_is_32bit(), which isn't much better than what we already have today. Cc: Palmer Dabbelt <palmer@dabbelt.com> Signed-off-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng@tinylab.org> Signed-off-by: Bin Meng <bmeng@tinylab.org> Message-Id: <20221221182300.307900-6-dbarboza@ventanamicro.com> Message-Id: <20221229091828.1945072-11-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-20hw/riscv: spike: Remove the out-of-date commentsBin Meng
Spike machine now supports OpenSBI plain binary bios image, so the comments are no longer valid. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221229091828.1945072-9-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-20hw/char: riscv_htif: Move registers from CPUArchState to HTIFStateBin Meng
At present for some unknown reason the HTIF registers (fromhost & tohost) are defined in the RISC-V CPUArchState. It should really be put in the HTIFState struct as it is only meaningful to HTIF. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221229091828.1945072-6-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-20hw/char: riscv_htif: Drop useless assignment of memory regionBin Meng
struct HTIFState has 3 members for address space and memory region, and are initialized during htif_mm_init(). But they are actually useless. Drop them. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Daniel Henrique Barboza <dbarboza@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221229091828.1945072-4-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2023-01-06hw/riscv: spike: Remove misleading commentsBin Meng
PLIC is not included in the 'spike' machine. Signed-off-by: Bin Meng <bmeng@tinylab.org> Reviewed-by: Wilfred Mallawa <wilfred.mallawa@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20221211030829.802437-5-bmeng@tinylab.org> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-10-17hw/riscv: set machine->fdt in spike_board_init()Daniel Henrique Barboza
This will enable support for the 'dumpdtb' QMP/HMP command for the spike machine. Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Alistair Francis <alistair.francis@wdc.com> Cc: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Message-Id: <20220926173855.1159396-16-danielhb413@gmail.com>
2022-09-07hw/riscv: remove 'fdt' param from riscv_setup_rom_reset_vec()Daniel Henrique Barboza
The 'fdt' param is not being used in riscv_setup_rom_reset_vec(). Simplify the API by removing it. While we're at it, remove the redundant 'return' statement at the end of function. Cc: Palmer Dabbelt <palmer@dabbelt.com> Cc: Alistair Francis <alistair.francis@wdc.com> Cc: Bin Meng <bin.meng@windriver.com> Cc: Vijai Kumar K <vijai@behindbytes.com> Signed-off-by: Daniel Henrique Barboza <danielhb413@gmail.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220728181926.2123771-1-danielhb413@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-05-24hw/riscv: Make CPU config error handling generous (virt/spike)Tsukasa OI
If specified CPU configuration is not valid, not just it prints error message, it aborts and generates core dumps (depends on the operating system). This kind of error handling should be used only when a serious runtime error occurs. This commit makes error handling on CPU configuration more generous on virt/spike machines. It now just prints error message and quits (without coredumps and aborts). Signed-off-by: Tsukasa OI <research_trasio@irq.a4lg.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <d17381d3ea4992808cf1894f379ca67220f61b45.1652509778.git.research_trasio@irq.a4lg.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-29hw/riscv: Don't add empty bootargs to device treeBin Meng
Commit 7c28f4da20e5 ("RISC-V: Don't add NULL bootargs to device-tree") tried to avoid adding *NULL* bootargs to device tree, but unfortunately the changes were entirely useless, due to MachineState::kernel_cmdline can't be NULL at all as the default value is given as an empty string. (see hw/core/machine.c::machine_initfn()). Note the wording of *NULL* bootargs is wrong. It can't be NULL otherwise a segfault had already been observed by dereferencing the NULL pointer. It should be worded as *empty" bootargs. Fixes: 7c28f4da20e5 ("RISC-V: Don't add NULL bootargs to device-tree") Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220421055629.1177285-2-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-04-29hw/riscv: spike: Add '/chosen/stdout-path' in device tree unconditionallyBin Meng
At present the adding '/chosen/stdout-path' property in device tree is determined by whether a kernel command line is provided, which is wrong. It should be added unconditionally. Fixes: 8d8897accb1c ("hw/riscv: spike: Allow using binary firmware as bios") Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20220421055629.1177285-1-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21hw/riscv: Remove macros for ELF BIOS image namesAnup Patel
Now that RISC-V Spike machine can use BIN BIOS images, we remove the macros used for ELF BIOS image names. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2022-01-21hw/riscv: spike: Allow using binary firmware as biosAnup Patel
Currently, we have to use OpenSBI firmware ELF as bios for the spike machine because the HTIF console requires ELF for parsing "fromhost" and "tohost" symbols. The latest OpenSBI can now optionally pick-up HTIF register address from HTIF DT node so using this feature spike machine can now use OpenSBI firmware BIN as bios. Signed-off-by: Anup Patel <apatel@ventanamicro.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-10-22hw/riscv: spike: Use MachineState::ram and MachineClass::default_ram_idBin Meng
Using memory_region_init_ram(), which can't possibly handle vhost-user, and can't work as expected with '-numa node,memdev' options. Use MachineState::ram instead of manually initializing RAM memory region, as well as by providing MachineClass::default_ram_id to opt in to memdev scheme. Signed-off-by: Bin Meng <bmeng.cn@gmail.com> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Igor Mammedov <imammedo@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20211020014112.7336-7-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/intc: Upgrade the SiFive CLINT implementation to RISC-V ACLINTAnup Patel
The RISC-V ACLINT is more modular and backward compatible with original SiFive CLINT so instead of duplicating the original SiFive CLINT implementation we upgrade the current SiFive CLINT implementation to RISC-V ACLINT implementation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-3-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-09-21hw/intc: Rename sifive_clint sources to riscv_aclint sourcesAnup Patel
We will be upgrading SiFive CLINT implementation into RISC-V ACLINT implementation so let's first rename the sources. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bmeng.cn@gmail.com> Message-id: 20210831110603.338681-2-anup.patel@wdc.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-08-26arch_init.h: Don't include arch_init.h unnecessarilyPeter Maydell
arch_init.h only defines the QEMU_ARCH_* enumeration and the arch_type global. Don't include it in files that don't use those. Signed-off-by: Peter Maydell <peter.maydell@linaro.org> Reviewed-by: Philippe Mathieu-Daudé <philmd@redhat.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210730105947.28215-8-peter.maydell@linaro.org
2021-06-08hw/riscv: Use macros for BIOS image namesBin Meng
The OpenSBI BIOS image names are used by many RISC-V machines. Let's define macros for them. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-7-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-06-08hw/riscv: Support the official CLINT DT bindingsBin Meng
Linux kernel commit a2770b57d083 ("dt-bindings: timer: Add CLINT bindings") adds the official DT bindings for CLINT, which uses "sifive,clint0" as the compatible string. "riscv,clint0" is now legacy and has to be kept for backward compatibility of legacy systems. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-id: 20210430071302.1489082-3-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-05-02hw: Do not include qemu/log.h if it is not necessaryThomas Huth
Many files include qemu/log.h without needing it. Remove the superfluous include statements. Signed-off-by: Thomas Huth <thuth@redhat.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <20210328054833.2351597-1-thuth@redhat.com> Signed-off-by: Laurent Vivier <laurent@vivier.eu>
2021-03-09qtest: delete superfluous inclusions of qtest.hChen Qun
There are 23 files that include the "sysemu/qtest.h", but they do not use any qtest functions. Signed-off-by: Chen Qun <kuhn.chenqun@huawei.com> Acked-by: Markus Armbruster <armbru@redhat.com> Message-Id: <20210226081414.205946-1-kuhn.chenqun@huawei.com> Signed-off-by: Thomas Huth <thuth@redhat.com>
2021-03-04hw/riscv: Drop 'struct MemmapEntry'Bin Meng
There is already a MemMapEntry type defined in hwaddr.h. Let's drop the RISC-V defined `struct MemmapEntry` and use the existing one. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Philippe Mathieu-Daudé <f4bug@amsat.org> Message-id: 20210220144807.819-2-bmeng.cn@gmail.com Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2021-01-16riscv: Pass RISCVHartArrayState by pointerAlistair Francis
We were accidently passing RISCVHartArrayState by value instead of pointer. The type is 824 bytes long so let's correct that and pass it by pointer instead. Fixes: Coverity CID 1438099 Fixes: Coverity CID 1438100 Fixes: Coverity CID 1438101 Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Message-id: f3e04424723e0e222769991896cc82308fd23f76.1610751609.git.alistair.francis@wdc.com
2020-12-17hw/riscv: Use the CPU to determine if 32-bitAlistair Francis
Instead of using string compares to determine if a RISC-V machine is using 32-bit or 64-bit CPUs we can use the initalised CPUs. This avoids us having to maintain a list of CPU names to compare against. This commit also fixes the name of the function to match the riscv_cpu_is_32bit() function. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Richard Henderson <richard.henderson@linaro.org> Message-id: 8ab7614e5df93ab5267788b73dcd75f9f5615e82.1608142916.git.alistair.francis@wdc.com
2020-12-17hw/riscv: spike: Remove compile time XLEN checksAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: ac75037dd58061486de421a0fcd9ac8a92014607.1608142916.git.alistair.francis@wdc.com
2020-12-17hw/riscv: boot: Remove compile time XLEN checksAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: 51e9842dbed1acceebad7f97bd3aae69aa1ac19e.1608142916.git.alistair.francis@wdc.com
2020-12-17riscv: spike: Remove target macro conditionalsAlistair Francis
Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Acked-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-id: 04ac7fba2348c92f296a5e6a9959ac72b77ae4c6.1608142916.git.alistair.francis@wdc.com
2020-10-22hw/riscv: Load the kernel after the firmwareAlistair Francis
Instead of loading the kernel at a hardcoded start address, let's load the kernel at the next aligned address after the end of the firmware. This should have no impact for current users of OpenSBI, but will allow loading a noMMU kernel at the start of memory. Signed-off-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Reviewed-by: Bin Meng <bin.meng@windriver.com> Tested-by: Bin Meng <bin.meng@windriver.com> Message-id: 46c00c4f15b42feb792090e3d74359e180a6d954.1602634524.git.alistair.francis@wdc.com
2020-09-09hw/riscv: Move riscv_htif model to hw/charBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move riscv_htif model to hw/char directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-8-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: Move sifive_clint model to hw/intcBin Meng
This is an effort to clean up the hw/riscv directory. Ideally it should only contain the RISC-V SoC / machine codes plus generic codes. Let's move sifive_clint model to hw/intc directory. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1599129623-68957-6-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-09-09hw/riscv: clint: Avoid using hard-coded timebase frequencyBin Meng
At present the CLINT timestamp is using a hard-coded timebase frequency value SIFIVE_CLINT_TIMEBASE_FREQ. This might not be true for all boards. Add a new 'timebase-freq' property to the CLINT device, and update various functions to accept this as a parameter. Signed-off-by: Bin Meng <bin.meng@windriver.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Message-Id: <1598924352-89526-16-git-send-email-bmeng.cn@gmail.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-25hw/riscv: spike: Allow creating multiple NUMA socketsAnup Patel
We extend RISC-V spike machine to allow creating a multi-socket machine. Each RISC-V spike machine socket is a NUMA node having a set of HARTs, a memory instance, and a CLINT instance. Other devices are shared between all sockets. We also update the generated device tree accordingly. By default, NUMA multi-socket support is disabled for RISC-V spike machine. To enable it, users can use "-numa" command-line options of QEMU. Example1: For two NUMA nodes with 2 CPUs each, append following to command-line options: "-smp 4 -numa node -numa node" Example2: For two NUMA nodes with 1 and 3 CPUs, append following to command-line options: "-smp 4 -numa node -numa node -numa cpu,node-id=0,core-id=0 \ -numa cpu,node-id=1,core-id=1 -numa cpu,node-id=1,core-id=2 \ -numa cpu,node-id=1,core-id=3" The maximum number of sockets in a RISC-V spike machine is 8 but this limit can be changed in future. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Atish Patra <atish.patra@wdc.com> Message-Id: <20200616032229.766089-5-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
2020-08-25hw/riscv: Allow creating multiple instances of CLINTAnup Patel
We extend CLINT emulation to allow multiple instances of CLINT in a QEMU RISC-V machine. To achieve this, we remove first HART id zero assumption from CLINT emulation. Signed-off-by: Anup Patel <anup.patel@wdc.com> Reviewed-by: Alistair Francis <alistair.francis@wdc.com> Reviewed-by: Palmer Dabbelt <palmerdabbelt@google.com> Message-Id: <20200616032229.766089-2-anup.patel@wdc.com> Signed-off-by: Alistair Francis <alistair.francis@wdc.com>
generated by cgit v1.2.3 (git 2.26.2) at 2024-12-23 04:14:03 +0000