aboutsummaryrefslogtreecommitdiff
path: root/cpu-defs.h
AgeCommit message (Collapse)Author
2010-05-11move stop/stopped CPU_COMMON fields after area zeroed by resetMarcelo Tosatti
cpu_reset zeroes CPUState upto breakpoints member. Contents of stop/stopped should not be zeroed on cpu_reset. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-05-11port qemu-kvm's on_vcpu codeMarcelo Tosatti
run_on_cpu allows to execute work on a given CPUState context. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Avi Kivity <avi@redhat.com>
2010-04-05Split TLB addend and target_phys_addr_tPaul Brook
Historically the qemu tlb "addend" field was used for both RAM and IO accesses, so needed to be able to hold both host addresses (unsigned long) and guest physical addresses (target_phys_addr_t). However since the introduction of the iotlb field it has only been used for RAM accesses. This means we can change the type of addend to unsigned long, and remove associated hacks in the big-endian TCG backends. We can also remove the host dependence from target_phys_addr_t. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-17Large page TLB flushPaul Brook
QEMU uses a fixed page size for the CPU TLB. If the guest uses large pages then we effectively split these into multiple smaller pages, and populate the corresponding TLB entries on demand. When the guest invalidates the TLB by virtual address we must invalidate all entries covered by the large page. However the address used to invalidate the entry may not be present in the QEMU TLB, so we do not know which regions to clear. Implementing a full vaiable size TLB is hard and slow, so just keep a simple address/mask pair to record which addresses may have been mapped by large pages. If the guest invalidates this region then flush the whole TLB. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-03-12Remove TLB from userspacePaul Brook
Remove TLB from userspace CPU structure. Signed-off-by: Paul Brook <paul@codesourcery.com>
2010-02-03KVM: Move and rename regs_modifiedJan Kiszka
Touching the user space representation of KVM's VCPU state is - naturally - a per-VCPU thing. So move the dirty flag into KVM_CPU_COMMON and rename it at this chance to reflect its true meaning. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com>
2009-12-18Revert "kvm: x86: Save/restore exception_index"Anthony Liguori
This reverts commit ebbc8a3d8e76d0402f8a08c10c0f32e24715d41d. As suggested by Jan Kiszka, "It was obsoleted by d1793b836f8f123b961c613de1bb1c0c185c84cc and now saves/restores a useless field." Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-12-12kvm: x86: Save/restore exception_indexJan Kiszka
As KVM now makes use of exception_index to keep pending exceptions, we have to save&restore this field as well. NOTE: We have to nail the arch-independent exception_index down to a certain bit width for proper vmstate processing, namely to 32 bit. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Revert "Get rid of _t suffix"Anthony Liguori
In the very least, a change like this requires discussion on the list. The naming convention is goofy and it causes a massive merge problem. Something like this _must_ be presented on the list first so people can provide input and cope with it. This reverts commit 99a0949b720a0936da2052cb9a46db04ffc6db29. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-10-01Get rid of _t suffixmalc
Some not so obvious bits, slirp and Xen were left alone for the time being. Signed-off-by: malc <av1474@comtv.ru>
2009-09-12Fix sys-queue.h conflict for goodBlue Swirl
Problem: Our file sys-queue.h is a copy of the BSD file, but there are some additions and it's not entirely compatible. Because of that, there have been conflicts with system headers on BSD systems. Some hacks have been introduced in the commits 15cc9235840a22c289edbe064a9b3c19c5f49896, f40d753718c72693c5f520f0d9899f6e50395e94, 96555a96d724016e13190b28cffa3bc929ac60dc and 3990d09adf4463eca200ad964cc55643c33feb50 but the fixes were fragile. Solution: Avoid the conflict entirely by renaming the functions and the file. Revert the previous hacks. Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-08-27extend -smp parsing to include cores= and threads= optionsAndre Przywara
For injecting multi-core and multi-threading CPU topology into guests extend the -smp syntax to accommodate cores and threads specification. Syntax: -smp smp_value[,cores=nr_cores][,threads=nr_threads]\ [,socket=nr_sockets][,maxcpus=max_cpus] smp_value is the legacy value specifying the total number of vCPUs for the guest. If you specify one of cores, threads or sockets this value can be omitted. Missing values will be computed to fulfill: smp_value = nr_cores * nr_threads * nr_sockets where it will favour sockets over cores over threads (to mimic the current behavior, which will only inject multiple sockets.) So -smp 4,threads=2 will inject two sockets with 2 threads each, -smp cores=4 is an abbreviation for -smp 4,cores=4,threads=1,sockets=1. If max_cpus (the number of hotpluggable CPUs) is omitted, it will be set to smp_value. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-27rename WORDS_BIGENDIAN to HOST_WORDS_BIGENDIANJuan Quintela
Signed-off-by: Juan Quintela <quintela@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com>
2009-07-16Update to a hopefully more future proof FSF addressBlue Swirl
Signed-off-by: Blue Swirl <blauwirbel@gmail.com>
2009-06-04fix gdbstub support for multiple threads in usermode, v3Nathan Froyd
When debugging multi-threaded programs, QEMU's gdb stub would report the correct number of threads (the qfThreadInfo and qsThreadInfo packets). However, the stub was unable to actually switch between threads (the T packet), since it would report every thread except the first as being dead. Furthermore, the stub relied upon cpu_index as a reliable means of assigning IDs to the threads. This was a bad idea; if you have this sequence of events: initial thread created new thread #1 new thread #2 thread #1 exits new thread #3 thread #3 will have the same cpu_index as thread #1, which would confuse GDB. (This problem is partly due to the remote protocol not having a good way to send thread creation/destruction events.) We fix this by using the host thread ID for the identifier passed to GDB when debugging a multi-threaded userspace program. The thread ID might wrap, but the same sort of problems with wrapping thread IDs would come up with debugging programs natively, so this doesn't represent a problem. Signed-off-by: Nathan Froyd <froydnj@codesourcery.com>
2009-05-19Hardware convenience libraryPaul Brook
The only target dependency for most hardware is sizeof(target_phys_addr_t). Build these files into a convenience library, and use that instead of building for every target. Remove and poison various target specific macros to avoid bogus target dependencies creeping back in. Big/Little endian is not handled because devices should not know or care about this to start with. Signed-off-by: Paul Brook <paul@codesourcery.com>
2009-04-24qemu: introduce iothread (Marcelo Tosatti)aliguori
Fill in the hooks and introduce iothread. Signed-off-by: Marcelo Tosatti <mtosatti@redhat.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7248 c046a42c-6fe2-441c-8c8c-71466251a162
2009-04-21added -numa cmdline parameter parser (Andre Przywara)aliguori
adds a -numa command line parameter and sets a QEMU global array with the memory sizes. The CPU-to-node assignemnt is written into the CPUState. If no specific values for memory and CPUs are given, all resources will be split equally across all nodes. This code currently support only up to 64 virtual CPUs. Signed-off-by: Andre Przywara <andre.przywara@amd.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@7210 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-07The _exit syscall is used for both thread termination in NPTL applications,pbrook
and process termination in legacy applications. Try to guess which we want based on the presence of multiple threads. Also implement locking when modifying the CPU list. Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6735 c046a42c-6fe2-441c-8c8c-71466251a162
2009-03-06Fix race condition on access to env->interrupt_requestaurel32
env->interrupt_request is accessed as the bit level from both main code and signal handler, making a race condition possible even on CISC CPU. This causes freeze of QEMU under high load when running the dyntick clock. The patch below move the bit corresponding to CPU_INTERRUPT_EXIT in a separate variable, declared as volatile sig_atomic_t, so it should be work even on RISC CPU. We may want to move the cpu_interrupt(env, CPU_INTERRUPT_EXIT) case in its own function and get rid of CPU_INTERRUPT_EXIT. That can be done later, I wanted to keep the patch short for easier review. Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6728 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-14Get rid of user_mode_onlyaurel32
Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6305 c046a42c-6fe2-441c-8c8c-71466251a162
2009-01-04Update FSF address in GPL/LGPL boilerplateaurel32
The attached patch updates the FSF address in the GPL/LGPL boilerplate in most GPL/LGPLed files, and also in COPYING.LIB. Signed-off-by: Stuart Brady <stuart.brady@gmail.com> Signed-off-by: Aurelien Jarno <aurelien@aurel32.net> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@6162 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-29Fix comment typo.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5808 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-25Use sys-queue.h for break/watchpoint managment (Jan Kiszka)aliguori
This switches cpu_break/watchpoint_* to TAILQ wrappers, simplifying the code and also fixing a use after release issue in cpu_break/watchpoint_remove_all. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5799 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-18Refactor and enhance break/watchpoint API (Jan Kiszka)aliguori
This patch prepares the QEMU cpu_watchpoint/breakpoint API to allow the succeeding enhancements this series comes with. First of all, it overcomes MAX_BREAKPOINTS/MAX_WATCHPOINTS by switching to dynamically allocated data structures that are kept in linked lists. This also allows to return a stable reference to the related objects, required for later introduced x86 debug register support. Breakpoints and watchpoints are stored with their full information set and an additional flag field that makes them easily extensible for use beyond pure guest debugging. Signed-off-by: Jan Kiszka <jan.kiszka@siemens.com> Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5738 c046a42c-6fe2-441c-8c8c-71466251a162
2008-11-05Add KVM support to QEMUaliguori
This patch adds very basic KVM support. KVM is a kernel module for Linux that allows userspace programs to make use of hardware virtualization support. It current supports x86 hardware virtualization using Intel VT-x or AMD-V. It also supports IA64 VT-i, PPC 440, and S390. This patch only implements the bare minimum support to get a guest booting. It has very little impact the rest of QEMU and attempts to integrate nicely with the rest of QEMU. Even though this implementation is basic, it is significantly faster than TCG. Booting and shutting down a Linux guest: w/TCG: 1:32.36 elapsed 84% CPU w/KVM: 0:31.14 elapsed 59% CPU Right now, KVM is disabled by default and must be explicitly enabled with -enable-kvm. We can enable it by default later when we have had better testing. Signed-off-by: Anthony Liguori <aliguori@us.ibm.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5627 c046a42c-6fe2-441c-8c8c-71466251a162
2008-10-11Add GDB XML register description support.pbrook
Signed-off-by: Paul Brook <paul@codesourcery.com> git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@5459 c046a42c-6fe2-441c-8c8c-71466251a162
2008-07-01Move interrupt_request and user_mode_only to common cpu state.pbrook
Save and restore env->interrupt_request and env->halted. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4817 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-29Add instruction counter.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4799 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-09Clean up MMIO TLB handling.pbrook
The IO index is now stored in its own field, instead of being wedged into the vaddr field. This eliminates the ROMD and watchpoint host pointer weirdness. The IO index space is expanded by 1 bit, and several additional bits are made available in the TLB vaddr field. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4704 c046a42c-6fe2-441c-8c8c-71466251a162
2008-06-07Multithreaded locking fixes.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4692 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-29Push common interrupt variables to cpu-defs.h (Glauber Costa)bellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4612 c046a42c-6fe2-441c-8c8c-71466251a162
2008-05-28moved halted field to CPU_COMMONbellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4609 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-27Use correct types to enable > 2G support, based on a patch fromaurel32
Anthony Liguori. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4265 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-22Revert "Use correct types to enable > 2G support" (r4238), it isaurel32
not yet ready. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4240 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-22Use correct types to enable > 2G support, based on a patch fromaurel32
Anthony Liguori. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4238 c046a42c-6fe2-441c-8c8c-71466251a162
2008-04-08Use a common constant for temp_buf sizeblueswir1
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@4176 c046a42c-6fe2-441c-8c8c-71466251a162
2008-02-01use the TCG code generatorbellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3944 c046a42c-6fe2-441c-8c8c-71466251a162
2008-01-31use simpler REGPARM convention - make CPUTLBEntry size a power of twobellard
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3935 c046a42c-6fe2-441c-8c8c-71466251a162
2007-12-09Handle cpu_model in copy_cpu(), by Kirill A. Shutemov.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3778 c046a42c-6fe2-441c-8c8c-71466251a162
2007-11-17Break up vl.h.pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3674 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-28Implement missing MIPS supervisor mode bits.ths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3472 c046a42c-6fe2-441c-8c8c-71466251a162
2007-10-14Replace is_user variable with mmu_idx in softmmu core,j_mayer
allowing support of more than 2 mmu access modes. Add backward compatibility is_user variable in targets code when needed. Implement per target cpu_mmu_index function, avoiding duplicated code and #ifdef TARGET_xxx in softmmu core functions. Implement per target mmu modes definitions. As an example, add PowerPC hypervisor mode definition and Alpha executive and kernel modes definitions. Optimize PowerPC case, precomputing mmu_idx when MSR register changes and using the same definition in code translation code. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3384 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-19TARGET_FMT_lu may also be useful.j_mayer
Fix compilation warnings. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3190 c046a42c-6fe2-441c-8c8c-71466251a162
2007-09-16find -type f | xargs sed -i 's/[\t ]$//g' # on most filesths
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3173 c046a42c-6fe2-441c-8c8c-71466251a162
2007-06-26Fix writes to pages containing watchpoints for the RAM not at 0x0 cases.balrog
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@3025 c046a42c-6fe2-441c-8c8c-71466251a162
2007-04-14Add TARGET_FMT_plx to properly display target_phys_addr_t variables.j_mayer
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2660 c046a42c-6fe2-441c-8c8c-71466251a162
2007-04-05Infrastructure to support more than 2 MMU modes.j_mayer
Add example for Alpha and PowerPC hypervisor mode. git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2596 c046a42c-6fe2-441c-8c8c-71466251a162
2007-04-04TARGET_FMT_ld may also be useful for debugging purposes.j_mayer
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2593 c046a42c-6fe2-441c-8c8c-71466251a162
2007-03-16Watchpoint support (previous commit got eaten by Savannah server crash).pbrook
git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@2479 c046a42c-6fe2-441c-8c8c-71466251a162
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-24 21:18:21 +0000