diff options
| -rw-r--r-- | hw/m68k/next-cube.c | 525 |
1 files changed, 227 insertions, 298 deletions
diff --git a/hw/m68k/next-cube.c b/hw/m68k/next-cube.c index fabd861941..292f13defb 100644 --- a/hw/m68k/next-cube.c +++ b/hw/m68k/next-cube.c @@ -62,6 +62,7 @@ typedef struct next_dma { } next_dma; typedef struct NextRtc { + int8_t phase; uint8_t ram[32]; uint8_t command; uint8_t value; @@ -73,6 +74,12 @@ typedef struct NextRtc { struct NeXTState { MachineState parent; + MemoryRegion rom; + MemoryRegion rom2; + MemoryRegion dmamem; + MemoryRegion bmapm1; + MemoryRegion bmapm2; + next_dma dma[10]; }; @@ -90,8 +97,10 @@ struct NeXTPC { uint32_t scr1; uint32_t scr2; + uint32_t old_scr2; uint32_t int_mask; uint32_t int_status; + uint32_t led; uint8_t scsi_csr_1; uint8_t scsi_csr_2; @@ -121,49 +130,46 @@ static const uint8_t rtc_ram2[32] = { #define SCR2_RTDATA 0x4 #define SCR2_TOBCD(x) (((x / 10) << 4) + (x % 10)) -static void nextscr2_write(NeXTPC *s, uint32_t val, int size) +static void next_scr2_led_update(NeXTPC *s) { - static int led; - static int phase; - static uint8_t old_scr2; - uint8_t scr2_2; - NextRtc *rtc = &s->rtc; - - if (size == 4) { - scr2_2 = (val >> 8) & 0xFF; - } else { - scr2_2 = val & 0xFF; - } - - if (val & 0x1) { + if (s->scr2 & 0x1) { DPRINTF("fault!\n"); - led++; - if (led == 10) { + s->led++; + if (s->led == 10) { DPRINTF("LED flashing, possible fault!\n"); - led = 0; + s->led = 0; } } +} + +static void next_scr2_rtc_update(NeXTPC *s) +{ + uint8_t old_scr2, scr2_2; + NextRtc *rtc = &s->rtc; + + old_scr2 = extract32(s->old_scr2, 8, 8); + scr2_2 = extract32(s->scr2, 8, 8); if (scr2_2 & 0x1) { - /* DPRINTF("RTC %x phase %i\n", scr2_2, phase); */ - if (phase == -1) { - phase = 0; + /* DPRINTF("RTC %x phase %i\n", scr2_2, rtc->phase); */ + if (rtc->phase == -1) { + rtc->phase = 0; } /* If we are in going down clock... do something */ if (((old_scr2 & SCR2_RTCLK) != (scr2_2 & SCR2_RTCLK)) && ((scr2_2 & SCR2_RTCLK) == 0)) { - if (phase < 8) { + if (rtc->phase < 8) { rtc->command = (rtc->command << 1) | ((scr2_2 & SCR2_RTDATA) ? 1 : 0); } - if (phase >= 8 && phase < 16) { + if (rtc->phase >= 8 && rtc->phase < 16) { rtc->value = (rtc->value << 1) | ((scr2_2 & SCR2_RTDATA) ? 1 : 0); /* if we read RAM register, output RT_DATA bit */ if (rtc->command <= 0x1F) { scr2_2 = scr2_2 & (~SCR2_RTDATA); - if (rtc->ram[rtc->command] & (0x80 >> (phase - 8))) { + if (rtc->ram[rtc->command] & (0x80 >> (rtc->phase - 8))) { scr2_2 |= SCR2_RTDATA; } @@ -174,7 +180,7 @@ static void nextscr2_write(NeXTPC *s, uint32_t val, int size) if (rtc->command == 0x30) { scr2_2 = scr2_2 & (~SCR2_RTDATA); /* for now status = 0x98 (new rtc + FTU) */ - if (rtc->status & (0x80 >> (phase - 8))) { + if (rtc->status & (0x80 >> (rtc->phase - 8))) { scr2_2 |= SCR2_RTDATA; } @@ -184,7 +190,7 @@ static void nextscr2_write(NeXTPC *s, uint32_t val, int size) /* read the status 0x31 */ if (rtc->command == 0x31) { scr2_2 = scr2_2 & (~SCR2_RTDATA); - if (rtc->control & (0x80 >> (phase - 8))) { + if (rtc->control & (0x80 >> (rtc->phase - 8))) { scr2_2 |= SCR2_RTDATA; } rtc->retval = (rtc->retval << 1) | @@ -220,7 +226,7 @@ static void nextscr2_write(NeXTPC *s, uint32_t val, int size) } - if (ret & (0x80 >> (phase - 8))) { + if (ret & (0x80 >> (rtc->phase - 8))) { scr2_2 |= SCR2_RTDATA; } rtc->retval = (rtc->retval << 1) | @@ -229,8 +235,8 @@ static void nextscr2_write(NeXTPC *s, uint32_t val, int size) } - phase++; - if (phase == 16) { + rtc->phase++; + if (rtc->phase == 16) { if (rtc->command >= 0x80 && rtc->command <= 0x9F) { rtc->ram[rtc->command - 0x80] = rtc->value; } @@ -246,233 +252,172 @@ static void nextscr2_write(NeXTPC *s, uint32_t val, int size) } } else { /* else end or abort */ - phase = -1; + rtc->phase = -1; rtc->command = 0; rtc->value = 0; } - s->scr2 = val & 0xFFFF00FF; - s->scr2 |= scr2_2 << 8; - old_scr2 = scr2_2; -} -static uint32_t mmio_readb(NeXTPC *s, hwaddr addr) -{ - switch (addr) { - case 0xc000: - return (s->scr1 >> 24) & 0xFF; - case 0xc001: - return (s->scr1 >> 16) & 0xFF; - case 0xc002: - return (s->scr1 >> 8) & 0xFF; - case 0xc003: - return (s->scr1 >> 0) & 0xFF; - - case 0xd000: - return (s->scr2 >> 24) & 0xFF; - case 0xd001: - return (s->scr2 >> 16) & 0xFF; - case 0xd002: - return (s->scr2 >> 8) & 0xFF; - case 0xd003: - return (s->scr2 >> 0) & 0xFF; - case 0x14020: - DPRINTF("MMIO Read 0x4020\n"); - return 0x7f; - - default: - DPRINTF("MMIO Read B @ %"HWADDR_PRIx"\n", addr); - return 0x0; - } + s->scr2 = deposit32(s->scr2, 8, 8, scr2_2); } -static uint32_t mmio_readw(NeXTPC *s, hwaddr addr) +static uint64_t next_mmio_read(void *opaque, hwaddr addr, unsigned size) { - switch (addr) { - default: - DPRINTF("MMIO Read W @ %"HWADDR_PRIx"\n", addr); - return 0x0; - } -} + NeXTPC *s = NEXT_PC(opaque); + uint64_t val; -static uint32_t mmio_readl(NeXTPC *s, hwaddr addr) -{ switch (addr) { case 0x7000: /* DPRINTF("Read INT status: %x\n", s->int_status); */ - return s->int_status; + val = s->int_status; + break; case 0x7800: DPRINTF("MMIO Read INT mask: %x\n", s->int_mask); - return s->int_mask; - - case 0xc000: - return s->scr1; + val = s->int_mask; + break; - case 0xd000: - return s->scr2; + case 0xc000 ... 0xc003: + val = extract32(s->scr1, (4 - (addr - 0xc000) - size) << 3, + size << 3); + break; - default: - DPRINTF("MMIO Read L @ %"HWADDR_PRIx"\n", addr); - return 0x0; - } -} + case 0xd000 ... 0xd003: + val = extract32(s->scr2, (4 - (addr - 0xd000) - size) << 3, + size << 3); + break; -static void mmio_writeb(NeXTPC *s, hwaddr addr, uint32_t val) -{ - switch (addr) { - case 0xd003: - nextscr2_write(s, val, 1); + case 0x14020: + val = 0x7f; break; + default: - DPRINTF("MMIO Write B @ %x with %x\n", (unsigned int)addr, val); + val = 0; + DPRINTF("MMIO Read @ 0x%"HWADDR_PRIx" size %d\n", addr, size); + break; } + return val; } -static void mmio_writew(NeXTPC *s, hwaddr addr, uint32_t val) +static void next_mmio_write(void *opaque, hwaddr addr, uint64_t val, + unsigned size) { - DPRINTF("MMIO Write W\n"); -} + NeXTPC *s = NEXT_PC(opaque); -static void mmio_writel(NeXTPC *s, hwaddr addr, uint32_t val) -{ switch (addr) { case 0x7000: - DPRINTF("INT Status old: %x new: %x\n", s->int_status, val); + DPRINTF("INT Status old: %x new: %x\n", s->int_status, + (unsigned int)val); s->int_status = val; break; + case 0x7800: - DPRINTF("INT Mask old: %x new: %x\n", s->int_mask, val); + DPRINTF("INT Mask old: %x new: %x\n", s->int_mask, (unsigned int)val); s->int_mask = val; break; - case 0xc000: - DPRINTF("SCR1 Write: %x\n", val); - break; - case 0xd000: - nextscr2_write(s, val, 4); - break; - - default: - DPRINTF("MMIO Write l @ %x with %x\n", (unsigned int)addr, val); - } -} -static uint64_t mmio_readfn(void *opaque, hwaddr addr, unsigned size) -{ - NeXTPC *s = NEXT_PC(opaque); - - switch (size) { - case 1: - return mmio_readb(s, addr); - case 2: - return mmio_readw(s, addr); - case 4: - return mmio_readl(s, addr); - default: - g_assert_not_reached(); - } -} - -static void mmio_writefn(void *opaque, hwaddr addr, uint64_t value, - unsigned size) -{ - NeXTPC *s = NEXT_PC(opaque); - - switch (size) { - case 1: - mmio_writeb(s, addr, value); - break; - case 2: - mmio_writew(s, addr, value); + case 0xc000 ... 0xc003: + DPRINTF("SCR1 Write: %x\n", (unsigned int)val); + s->scr1 = deposit32(s->scr1, (4 - (addr - 0xc000) - size) << 3, + size << 3, val); break; - case 4: - mmio_writel(s, addr, value); + + case 0xd000 ... 0xd003: + s->scr2 = deposit32(s->scr2, (4 - (addr - 0xd000) - size) << 3, + size << 3, val); + next_scr2_led_update(s); + next_scr2_rtc_update(s); + s->old_scr2 = s->scr2; break; + default: - g_assert_not_reached(); + DPRINTF("MMIO Write @ 0x%"HWADDR_PRIx " with 0x%x size %u\n", addr, + (unsigned int)val, size); } } -static const MemoryRegionOps mmio_ops = { - .read = mmio_readfn, - .write = mmio_writefn, +static const MemoryRegionOps next_mmio_ops = { + .read = next_mmio_read, + .write = next_mmio_write, .valid.min_access_size = 1, .valid.max_access_size = 4, - .endianness = DEVICE_NATIVE_ENDIAN, + .endianness = DEVICE_BIG_ENDIAN, }; -static uint32_t scr_readb(NeXTPC *s, hwaddr addr) +#define SCSICSR_ENABLE 0x01 +#define SCSICSR_RESET 0x02 /* reset scsi dma */ +#define SCSICSR_FIFOFL 0x04 +#define SCSICSR_DMADIR 0x08 /* if set, scsi to mem */ +#define SCSICSR_CPUDMA 0x10 /* if set, dma enabled */ +#define SCSICSR_INTMASK 0x20 /* if set, interrupt enabled */ + +static uint64_t next_scr_readfn(void *opaque, hwaddr addr, unsigned size) { + NeXTPC *s = NEXT_PC(opaque); + uint64_t val; + switch (addr) { case 0x14108: DPRINTF("FD read @ %x\n", (unsigned int)addr); - return 0x40 | 0x04 | 0x2 | 0x1; + val = 0x40 | 0x04 | 0x2 | 0x1; + break; + case 0x14020: DPRINTF("SCSI 4020 STATUS READ %X\n", s->scsi_csr_1); - return s->scsi_csr_1; + val = s->scsi_csr_1; + break; case 0x14021: DPRINTF("SCSI 4021 STATUS READ %X\n", s->scsi_csr_2); - return 0x40; + val = 0x40; + break; /* * These 4 registers are the hardware timer, not sure which register - * is the latch instead of data, but no problems so far + * is the latch instead of data, but no problems so far. + * + * Hack: We need to have the LSB change consistently to make it work */ - case 0x1a000: - return 0xff & (clock() >> 24); - case 0x1a001: - return 0xff & (clock() >> 16); - case 0x1a002: - return 0xff & (clock() >> 8); - case 0x1a003: - /* Hack: We need to have this change consistently to make it work */ - return 0xFF & clock(); + case 0x1a000 ... 0x1a003: + val = extract32(clock(), (4 - (addr - 0x1a000) - size) << 3, + size << 3); + break; + + /* For now return dummy byte to allow the Ethernet test to timeout */ + case 0x6000: + val = 0xff; + break; default: - DPRINTF("BMAP Read B @ %x\n", (unsigned int)addr); - return 0; + DPRINTF("BMAP Read @ 0x%x size %u\n", (unsigned int)addr, size); + val = 0; + break; } -} -static uint32_t scr_readw(NeXTPC *s, hwaddr addr) -{ - DPRINTF("BMAP Read W @ %x\n", (unsigned int)addr); - return 0; + return val; } -static uint32_t scr_readl(NeXTPC *s, hwaddr addr) +static void next_scr_writefn(void *opaque, hwaddr addr, uint64_t val, + unsigned size) { - DPRINTF("BMAP Read L @ %x\n", (unsigned int)addr); - return 0; -} - -#define SCSICSR_ENABLE 0x01 -#define SCSICSR_RESET 0x02 /* reset scsi dma */ -#define SCSICSR_FIFOFL 0x04 -#define SCSICSR_DMADIR 0x08 /* if set, scsi to mem */ -#define SCSICSR_CPUDMA 0x10 /* if set, dma enabled */ -#define SCSICSR_INTMASK 0x20 /* if set, interrupt enabled */ + NeXTPC *s = NEXT_PC(opaque); -static void scr_writeb(NeXTPC *s, hwaddr addr, uint32_t value) -{ switch (addr) { case 0x14108: DPRINTF("FDCSR Write: %x\n", value); - - if (value == 0x0) { + if (val == 0x0) { /* qemu_irq_raise(s->fd_irq[0]); */ } break; + case 0x14020: /* SCSI Control Register */ - if (value & SCSICSR_FIFOFL) { + if (val & SCSICSR_FIFOFL) { DPRINTF("SCSICSR FIFO Flush\n"); /* will have to add another irq to the esp if this is needed */ /* esp_puflush_fifo(esp_g); */ - qemu_irq_pulse(s->scsi_dma); } - if (value & SCSICSR_ENABLE) { + if (val & SCSICSR_ENABLE) { DPRINTF("SCSICSR Enable\n"); /* * qemu_irq_raise(s->scsi_dma); @@ -486,17 +431,17 @@ static void scr_writeb(NeXTPC *s, hwaddr addr, uint32_t value) * s->scsi_csr_1 &= ~SCSICSR_ENABLE; */ - if (value & SCSICSR_RESET) { + if (val & SCSICSR_RESET) { DPRINTF("SCSICSR Reset\n"); /* I think this should set DMADIR. CPUDMA and INTMASK to 0 */ qemu_irq_raise(s->scsi_reset); s->scsi_csr_1 &= ~(SCSICSR_INTMASK | 0x80 | 0x1); qemu_irq_lower(s->scsi_reset); } - if (value & SCSICSR_DMADIR) { + if (val & SCSICSR_DMADIR) { DPRINTF("SCSICSR DMAdir\n"); } - if (value & SCSICSR_CPUDMA) { + if (val & SCSICSR_CPUDMA) { DPRINTF("SCSICSR CPUDMA\n"); /* qemu_irq_raise(s->scsi_dma); */ s->int_status |= 0x4000000; @@ -505,11 +450,11 @@ static void scr_writeb(NeXTPC *s, hwaddr addr, uint32_t value) s->int_status &= ~(0x4000000); /* qemu_irq_lower(s->scsi_dma); */ } - if (value & SCSICSR_INTMASK) { + if (val & SCSICSR_INTMASK) { DPRINTF("SCSICSR INTMASK\n"); /* * int_mask &= ~0x1000; - * s->scsi_csr_1 |= value; + * s->scsi_csr_1 |= val; * s->scsi_csr_1 &= ~SCSICSR_INTMASK; * if (s->scsi_queued) { * s->scsi_queued = 0; @@ -519,72 +464,28 @@ static void scr_writeb(NeXTPC *s, hwaddr addr, uint32_t value) } else { /* int_mask |= 0x1000; */ } - if (value & 0x80) { + if (val & 0x80) { /* int_mask |= 0x1000; */ /* s->scsi_csr_1 |= 0x80; */ } - DPRINTF("SCSICSR Write: %x\n", value); - /* s->scsi_csr_1 = value; */ - return; + DPRINTF("SCSICSR Write: %x\n", val); + /* s->scsi_csr_1 = val; */ + break; + /* Hardware timer latch - not implemented yet */ case 0x1a000: default: - DPRINTF("BMAP Write B @ %x with %x\n", (unsigned int)addr, value); - } -} - -static void scr_writew(NeXTPC *s, hwaddr addr, uint32_t value) -{ - DPRINTF("BMAP Write W @ %x with %x\n", (unsigned int)addr, value); -} - -static void scr_writel(NeXTPC *s, hwaddr addr, uint32_t value) -{ - DPRINTF("BMAP Write L @ %x with %x\n", (unsigned int)addr, value); -} - -static uint64_t scr_readfn(void *opaque, hwaddr addr, unsigned size) -{ - NeXTPC *s = NEXT_PC(opaque); - - switch (size) { - case 1: - return scr_readb(s, addr); - case 2: - return scr_readw(s, addr); - case 4: - return scr_readl(s, addr); - default: - g_assert_not_reached(); - } -} - -static void scr_writefn(void *opaque, hwaddr addr, uint64_t value, - unsigned size) -{ - NeXTPC *s = NEXT_PC(opaque); - - switch (size) { - case 1: - scr_writeb(s, addr, value); - break; - case 2: - scr_writew(s, addr, value); - break; - case 4: - scr_writel(s, addr, value); - break; - default: - g_assert_not_reached(); + DPRINTF("BMAP Write @ 0x%x with 0x%x size %u\n", (unsigned int)addr, + val, size); } } -static const MemoryRegionOps scr_ops = { - .read = scr_readfn, - .write = scr_writefn, +static const MemoryRegionOps next_scr_ops = { + .read = next_scr_readfn, + .write = next_scr_writefn, .valid.min_access_size = 1, .valid.max_access_size = 4, - .endianness = DEVICE_NATIVE_ENDIAN, + .endianness = DEVICE_BIG_ENDIAN, }; #define NEXTDMA_SCSI(x) (0x10 + x) @@ -599,59 +500,63 @@ static const MemoryRegionOps scr_ops = { #define NEXTDMA_NEXT_INIT 0x4200 #define NEXTDMA_SIZE 0x4204 -static void dma_writel(void *opaque, hwaddr addr, uint64_t value, - unsigned int size) +static void next_dma_write(void *opaque, hwaddr addr, uint64_t val, + unsigned int size) { NeXTState *next_state = NEXT_MACHINE(opaque); switch (addr) { case NEXTDMA_ENRX(NEXTDMA_CSR): - if (value & DMA_DEV2M) { + if (val & DMA_DEV2M) { next_state->dma[NEXTDMA_ENRX].csr |= DMA_DEV2M; } - if (value & DMA_SETENABLE) { + if (val & DMA_SETENABLE) { /* DPRINTF("SCSI DMA ENABLE\n"); */ next_state->dma[NEXTDMA_ENRX].csr |= DMA_ENABLE; } - if (value & DMA_SETSUPDATE) { + if (val & DMA_SETSUPDATE) { next_state->dma[NEXTDMA_ENRX].csr |= DMA_SUPDATE; } - if (value & DMA_CLRCOMPLETE) { + if (val & DMA_CLRCOMPLETE) { next_state->dma[NEXTDMA_ENRX].csr &= ~DMA_COMPLETE; } - if (value & DMA_RESET) { + if (val & DMA_RESET) { next_state->dma[NEXTDMA_ENRX].csr &= ~(DMA_COMPLETE | DMA_SUPDATE | DMA_ENABLE | DMA_DEV2M); } /* DPRINTF("RXCSR \tWrite: %x\n",value); */ break; + case NEXTDMA_ENRX(NEXTDMA_NEXT_INIT): - next_state->dma[NEXTDMA_ENRX].next_initbuf = value; + next_state->dma[NEXTDMA_ENRX].next_initbuf = val; break; + case NEXTDMA_ENRX(NEXTDMA_NEXT): - next_state->dma[NEXTDMA_ENRX].next = value; + next_state->dma[NEXTDMA_ENRX].next = val; break; + case NEXTDMA_ENRX(NEXTDMA_LIMIT): - next_state->dma[NEXTDMA_ENRX].limit = value; + next_state->dma[NEXTDMA_ENRX].limit = val; break; + case NEXTDMA_SCSI(NEXTDMA_CSR): - if (value & DMA_DEV2M) { + if (val & DMA_DEV2M) { next_state->dma[NEXTDMA_SCSI].csr |= DMA_DEV2M; } - if (value & DMA_SETENABLE) { + if (val & DMA_SETENABLE) { /* DPRINTF("SCSI DMA ENABLE\n"); */ next_state->dma[NEXTDMA_SCSI].csr |= DMA_ENABLE; } - if (value & DMA_SETSUPDATE) { + if (val & DMA_SETSUPDATE) { next_state->dma[NEXTDMA_SCSI].csr |= DMA_SUPDATE; } - if (value & DMA_CLRCOMPLETE) { + if (val & DMA_CLRCOMPLETE) { next_state->dma[NEXTDMA_SCSI].csr &= ~DMA_COMPLETE; } - if (value & DMA_RESET) { + if (val & DMA_RESET) { next_state->dma[NEXTDMA_SCSI].csr &= ~(DMA_COMPLETE | DMA_SUPDATE | DMA_ENABLE | DMA_DEV2M); /* DPRINTF("SCSI DMA RESET\n"); */ @@ -660,23 +565,23 @@ static void dma_writel(void *opaque, hwaddr addr, uint64_t value, break; case NEXTDMA_SCSI(NEXTDMA_NEXT): - next_state->dma[NEXTDMA_SCSI].next = value; + next_state->dma[NEXTDMA_SCSI].next = val; break; case NEXTDMA_SCSI(NEXTDMA_LIMIT): - next_state->dma[NEXTDMA_SCSI].limit = value; + next_state->dma[NEXTDMA_SCSI].limit = val; break; case NEXTDMA_SCSI(NEXTDMA_START): - next_state->dma[NEXTDMA_SCSI].start = value; + next_state->dma[NEXTDMA_SCSI].start = val; break; case NEXTDMA_SCSI(NEXTDMA_STOP): - next_state->dma[NEXTDMA_SCSI].stop = value; + next_state->dma[NEXTDMA_SCSI].stop = val; break; case NEXTDMA_SCSI(NEXTDMA_NEXT_INIT): - next_state->dma[NEXTDMA_SCSI].next_initbuf = value; + next_state->dma[NEXTDMA_SCSI].next_initbuf = val; break; default: @@ -684,52 +589,73 @@ static void dma_writel(void *opaque, hwaddr addr, uint64_t value, } } -static uint64_t dma_readl(void *opaque, hwaddr addr, unsigned int size) +static uint64_t next_dma_read(void *opaque, hwaddr addr, unsigned int size) { NeXTState *next_state = NEXT_MACHINE(opaque); + uint64_t val; switch (addr) { case NEXTDMA_SCSI(NEXTDMA_CSR): DPRINTF("SCSI DMA CSR READ\n"); - return next_state->dma[NEXTDMA_SCSI].csr; + val = next_state->dma[NEXTDMA_SCSI].csr; + break; + case NEXTDMA_ENRX(NEXTDMA_CSR): - return next_state->dma[NEXTDMA_ENRX].csr; + val = next_state->dma[NEXTDMA_ENRX].csr; + break; + case NEXTDMA_ENRX(NEXTDMA_NEXT_INIT): - return next_state->dma[NEXTDMA_ENRX].next_initbuf; + val = next_state->dma[NEXTDMA_ENRX].next_initbuf; + break; + case NEXTDMA_ENRX(NEXTDMA_NEXT): - return next_state->dma[NEXTDMA_ENRX].next; + val = next_state->dma[NEXTDMA_ENRX].next; + break; + case NEXTDMA_ENRX(NEXTDMA_LIMIT): - return next_state->dma[NEXTDMA_ENRX].limit; + val = next_state->dma[NEXTDMA_ENRX].limit; + break; case NEXTDMA_SCSI(NEXTDMA_NEXT): - return next_state->dma[NEXTDMA_SCSI].next; + val = next_state->dma[NEXTDMA_SCSI].next; + break; + case NEXTDMA_SCSI(NEXTDMA_NEXT_INIT): - return next_state->dma[NEXTDMA_SCSI].next_initbuf; + val = next_state->dma[NEXTDMA_SCSI].next_initbuf; + break; + case NEXTDMA_SCSI(NEXTDMA_LIMIT): - return next_state->dma[NEXTDMA_SCSI].limit; + val = next_state->dma[NEXTDMA_SCSI].limit; + break; + case NEXTDMA_SCSI(NEXTDMA_START): - return next_state->dma[NEXTDMA_SCSI].start; + val = next_state->dma[NEXTDMA_SCSI].start; + break; + case NEXTDMA_SCSI(NEXTDMA_STOP): - return next_state->dma[NEXTDMA_SCSI].stop; + val = next_state->dma[NEXTDMA_SCSI].stop; + break; default: DPRINTF("DMA read @ %x\n", (unsigned int)addr); - return 0; + val = 0; } /* * once the csr's are done, subtract 0x3FEC from the addr, and that will * normalize the upper registers */ + + return val; } -static const MemoryRegionOps dma_ops = { - .read = dma_readl, - .write = dma_writel, +static const MemoryRegionOps next_dma_ops = { + .read = next_dma_read, + .write = next_dma_write, .impl.min_access_size = 4, .valid.min_access_size = 4, .valid.max_access_size = 4, - .endianness = DEVICE_NATIVE_ENDIAN, + .endianness = DEVICE_BIG_ENDIAN, }; static void next_irq(void *opaque, int number, int level) @@ -959,6 +885,7 @@ static void next_pc_reset(DeviceState *dev) /* 0x0000XX00 << vital bits */ s->scr1 = 0x00011102; s->scr2 = 0x00ff0c80; + s->old_scr2 = s->scr2; s->rtc.status = 0x90; @@ -973,9 +900,9 @@ static void next_pc_realize(DeviceState *dev, Error **errp) qdev_init_gpio_in(dev, next_irq, NEXT_NUM_IRQS); - memory_region_init_io(&s->mmiomem, OBJECT(s), &mmio_ops, s, - "next.mmio", 0xD0000); - memory_region_init_io(&s->scrmem, OBJECT(s), &scr_ops, s, + memory_region_init_io(&s->mmiomem, OBJECT(s), &next_mmio_ops, s, + "next.mmio", 0xd0000); + memory_region_init_io(&s->scrmem, OBJECT(s), &next_scr_ops, s, "next.scr", 0x20000); sysbus_init_mmio(sbd, &s->mmiomem); sysbus_init_mmio(sbd, &s->scrmem); @@ -994,9 +921,10 @@ static Property next_pc_properties[] = { static const VMStateDescription next_rtc_vmstate = { .name = "next-rtc", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { + VMSTATE_INT8(phase, NextRtc), VMSTATE_UINT8_ARRAY(ram, NextRtc, 32), VMSTATE_UINT8(command, NextRtc), VMSTATE_UINT8(value, NextRtc), @@ -1009,13 +937,15 @@ static const VMStateDescription next_rtc_vmstate = { static const VMStateDescription next_pc_vmstate = { .name = "next-pc", - .version_id = 1, - .minimum_version_id = 1, + .version_id = 2, + .minimum_version_id = 2, .fields = (VMStateField[]) { VMSTATE_UINT32(scr1, NeXTPC), VMSTATE_UINT32(scr2, NeXTPC), + VMSTATE_UINT32(old_scr2, NeXTPC), VMSTATE_UINT32(int_mask, NeXTPC), VMSTATE_UINT32(int_status, NeXTPC), + VMSTATE_UINT32(led, NeXTPC), VMSTATE_UINT8(scsi_csr_1, NeXTPC), VMSTATE_UINT8(scsi_csr_2, NeXTPC), VMSTATE_STRUCT(rtc, NeXTPC, 0, next_rtc_vmstate, NextRtc), @@ -1043,13 +973,9 @@ static const TypeInfo next_pc_info = { static void next_cube_init(MachineState *machine) { + NeXTState *m = NEXT_MACHINE(machine); M68kCPU *cpu; CPUM68KState *env; - MemoryRegion *rom = g_new(MemoryRegion, 1); - MemoryRegion *rom2 = g_new(MemoryRegion, 1); - MemoryRegion *dmamem = g_new(MemoryRegion, 1); - MemoryRegion *bmapm1 = g_new(MemoryRegion, 1); - MemoryRegion *bmapm2 = g_new(MemoryRegion, 1); MemoryRegion *sysmem = get_system_memory(); const char *bios_name = machine->firmware ?: ROM_FILE; DeviceState *pcdev; @@ -1084,21 +1010,23 @@ static void next_cube_init(MachineState *machine) sysbus_mmio_map(SYS_BUS_DEVICE(pcdev), 1, 0x02100000); /* BMAP memory */ - memory_region_init_ram_flags_nomigrate(bmapm1, NULL, "next.bmapmem", 64, - RAM_SHARED, &error_fatal); - memory_region_add_subregion(sysmem, 0x020c0000, bmapm1); + memory_region_init_ram_flags_nomigrate(&m->bmapm1, NULL, "next.bmapmem", + 64, RAM_SHARED, &error_fatal); + memory_region_add_subregion(sysmem, 0x020c0000, &m->bmapm1); /* The Rev_2.5_v66.bin firmware accesses it at 0x820c0020, too */ - memory_region_init_alias(bmapm2, NULL, "next.bmapmem2", bmapm1, 0x0, 64); - memory_region_add_subregion(sysmem, 0x820c0000, bmapm2); + memory_region_init_alias(&m->bmapm2, NULL, "next.bmapmem2", &m->bmapm1, + 0x0, 64); + memory_region_add_subregion(sysmem, 0x820c0000, &m->bmapm2); /* KBD */ sysbus_create_simple(TYPE_NEXTKBD, 0x0200e000, NULL); /* Load ROM here */ - memory_region_init_rom(rom, NULL, "next.rom", 0x20000, &error_fatal); - memory_region_add_subregion(sysmem, 0x01000000, rom); - memory_region_init_alias(rom2, NULL, "next.rom2", rom, 0x0, 0x20000); - memory_region_add_subregion(sysmem, 0x0, rom2); + memory_region_init_rom(&m->rom, NULL, "next.rom", 0x20000, &error_fatal); + memory_region_add_subregion(sysmem, 0x01000000, &m->rom); + memory_region_init_alias(&m->rom2, NULL, "next.rom2", &m->rom, 0x0, + 0x20000); + memory_region_add_subregion(sysmem, 0x0, &m->rom2); if (load_image_targphys(bios_name, 0x01000000, 0x20000) < 8) { if (!qtest_enabled()) { error_report("Failed to load firmware '%s'.", bios_name); @@ -1125,8 +1053,9 @@ static void next_cube_init(MachineState *machine) next_scsi_init(pcdev, cpu); /* DMA */ - memory_region_init_io(dmamem, NULL, &dma_ops, machine, "next.dma", 0x5000); - memory_region_add_subregion(sysmem, 0x02000000, dmamem); + memory_region_init_io(&m->dmamem, NULL, &next_dma_ops, machine, + "next.dma", 0x5000); + memory_region_add_subregion(sysmem, 0x02000000, &m->dmamem); } static void next_machine_class_init(ObjectClass *oc, void *data) |