libqos/ahci: Add cmd response sanity check helpers

This patch adds a few helpers to help sanity-check the response of the
AHCI device after a command.

ahci_d2h_check_sanity inspects the D2H Register FIS,
ahci_pio_check_sanity inspects the PIO Setup FIS, and
ahci_cmd_check_sanity inspects the command header.

To support the PIO sanity check, a new structure is added for the
PIO Setup FIS type. Existing FIS types (H2D and D2H) have had their
members renamed slightly to condense reserved members into fewer
fields; and LBA fields are now represented by arrays of 8 byte chunks
instead of independent variables.

Signed-off-by: John Snow <jsnow@redhat.com>
Reviewed-by: Paolo Bonzini <pbonzini@redhat.com>
Message-id: 1423158090-25580-9-git-send-email-jsnow@redhat.com
Signed-off-by: Stefan Hajnoczi <stefanha@redhat.com>

2 files changed, 84 insertions, 17 deletions

diff --git a/tests/libqos/ahci.c b/tests/libqos/ahci.c
index 7ed6494805..8ecfdd30d8 100644
--- a/tests/libqos/ahci.c
+++ b/tests/libqos/ahci.c
@@ -365,6 +365,53 @@ void ahci_port_check_nonbusy(AHCIQState *ahci, uint8_t port, uint8_t slot)
     ASSERT_BIT_CLEAR(reg, AHCI_PX_TFD_STS_DRQ);
 }
 
+void ahci_port_check_d2h_sanity(AHCIQState *ahci, uint8_t port, uint8_t slot)
+{
+    RegD2HFIS *d2h = g_malloc0(0x20);
+    uint32_t reg;
+
+    memread(ahci->port[port].fb + 0x40, d2h, 0x20);
+    g_assert_cmphex(d2h->fis_type, ==, 0x34);
+
+    reg = ahci_px_rreg(ahci, port, AHCI_PX_TFD);
+    g_assert_cmphex((reg & AHCI_PX_TFD_ERR) >> 8, ==, d2h->error);
+    g_assert_cmphex((reg & AHCI_PX_TFD_STS), ==, d2h->status);
+
+    g_free(d2h);
+}
+
+void ahci_port_check_pio_sanity(AHCIQState *ahci, uint8_t port,
+                                uint8_t slot, size_t buffsize)
+{
+    PIOSetupFIS *pio = g_malloc0(0x20);
+
+    /* We cannot check the Status or E_Status registers, becuase
+     * the status may have again changed between the PIO Setup FIS
+     * and the conclusion of the command with the D2H Register FIS. */
+    memread(ahci->port[port].fb + 0x20, pio, 0x20);
+    g_assert_cmphex(pio->fis_type, ==, 0x5f);
+
+    /* BUG: PIO Setup FIS as utilized by QEMU tries to fit the entire
+     * transfer size in a uint16_t field. The maximum transfer size can
+     * eclipse this; the field is meant to convey the size of data per
+     * each Data FIS, not the entire operation as a whole. For now,
+     * we will sanity check the broken case where applicable. */
+    if (buffsize <= UINT16_MAX) {
+        g_assert_cmphex(le16_to_cpu(pio->tx_count), ==, buffsize);
+    }
+
+    g_free(pio);
+}
+
+void ahci_port_check_cmd_sanity(AHCIQState *ahci, uint8_t port,
+                                uint8_t slot, size_t buffsize)
+{
+    AHCICommandHeader cmd;
+
+    ahci_get_command_header(ahci, port, slot, &cmd);
+    g_assert_cmphex(buffsize, ==, cmd.prdbc);
+}
+
 /* Get the command in #slot of port #port. */
 void ahci_get_command_header(AHCIQState *ahci, uint8_t port,
                              uint8_t slot, AHCICommandHeader *cmd)
diff --git a/tests/libqos/ahci.h b/tests/libqos/ahci.h
index eaad076f46..f17aa23e0e 100644
--- a/tests/libqos/ahci.h
+++ b/tests/libqos/ahci.h
@@ -283,25 +283,44 @@ typedef struct RegD2HFIS {
     uint8_t status;
     uint8_t error;
     /* DW1 */
-    uint8_t lba_low;
-    uint8_t lba_mid;
-    uint8_t lba_high;
+    uint8_t lba_lo[3];
     uint8_t device;
     /* DW2 */
-    uint8_t lba3;
-    uint8_t lba4;
-    uint8_t lba5;
-    uint8_t res1;
+    uint8_t lba_hi[3];
+    uint8_t res0;
     /* DW3 */
     uint16_t count;
-    uint8_t res2;
-    uint8_t res3;
+    uint16_t res1;
     /* DW4 */
-    uint16_t res4;
-    uint16_t res5;
+    uint32_t res2;
 } __attribute__((__packed__)) RegD2HFIS;
 
 /**
+ * Register device-to-host FIS structure;
+ * PIO Setup variety.
+ */
+typedef struct PIOSetupFIS {
+    /* DW0 */
+    uint8_t fis_type;
+    uint8_t flags;
+    uint8_t status;
+    uint8_t error;
+    /* DW1 */
+    uint8_t lba_lo[3];
+    uint8_t device;
+    /* DW2 */
+    uint8_t lba_hi[3];
+    uint8_t res0;
+    /* DW3 */
+    uint16_t count;
+    uint8_t res1;
+    uint8_t e_status;
+    /* DW4 */
+    uint16_t tx_count;
+    uint16_t res2;
+} __attribute__((__packed__)) PIOSetupFIS;
+
+/**
  * Register host-to-device FIS structure.
  */
 typedef struct RegH2DFIS {
@@ -311,14 +330,10 @@ typedef struct RegH2DFIS {
     uint8_t command;
     uint8_t feature_low;
     /* DW1 */
-    uint8_t lba_low;
-    uint8_t lba_mid;
-    uint8_t lba_high;
+    uint8_t lba_lo[3];
     uint8_t device;
     /* DW2 */
-    uint8_t lba3;
-    uint8_t lba4;
-    uint8_t lba5;
+    uint8_t lba_hi[3];
     uint8_t feature_high;
     /* DW3 */
     uint16_t count;
@@ -437,6 +452,11 @@ void ahci_port_check_error(AHCIQState *ahci, uint8_t port);
 void ahci_port_check_interrupts(AHCIQState *ahci, uint8_t port,
                                 uint32_t intr_mask);
 void ahci_port_check_nonbusy(AHCIQState *ahci, uint8_t port, uint8_t slot);
+void ahci_port_check_d2h_sanity(AHCIQState *ahci, uint8_t port, uint8_t slot);
+void ahci_port_check_pio_sanity(AHCIQState *ahci, uint8_t port,
+                                uint8_t slot, size_t buffsize);
+void ahci_port_check_cmd_sanity(AHCIQState *ahci, uint8_t port,
+                                uint8_t slot, size_t buffsize);
 void ahci_get_command_header(AHCIQState *ahci, uint8_t port,
                              uint8_t slot, AHCICommandHeader *cmd);
 void ahci_set_command_header(AHCIQState *ahci, uint8_t port,