hw/timer/bcm2835: Add the BCM2835 SYS_timer

Add the 64-bit free running timer. Do not model the COMPARE register
(no IRQ generated).
This timer is used by Linux kernel and recently U-Boot:
https://git.kernel.org/pub/scm/linux/kernel/git/torvalds/linux.git/tree/drivers/clocksource/bcm2835_timer.c?h=v3.7
https://github.com/u-boot/u-boot/blob/v2019.07/include/configs/rpi.h#L19

Datasheet used:
https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf

Signed-off-by: Philippe Mathieu-Daudé <f4bug@amsat.org>
Reviewed-by: Alistair Francis <alistair.francis@wdc.com>
Message-id: 20191019234715.25750-4-f4bug@amsat.org
[PMM: squashed in switch to using memset in reset]
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 163 insertions, 0 deletions

diff --git a/hw/timer/bcm2835_systmr.c b/hw/timer/bcm2835_systmr.c
new file mode 100644
index 0000000000..3387a6214a
--- /dev/null
+++ b/hw/timer/bcm2835_systmr.c
@@ -0,0 +1,163 @@
+/*
+ * BCM2835 SYS timer emulation
+ *
+ * Copyright (C) 2019 Philippe Mathieu-Daudé <f4bug@amsat.org>
+ *
+ * SPDX-License-Identifier: GPL-2.0-or-later
+ *
+ * Datasheet: BCM2835 ARM Peripherals (C6357-M-1398)
+ * https://www.raspberrypi.org/app/uploads/2012/02/BCM2835-ARM-Peripherals.pdf
+ *
+ * Only the free running 64-bit counter is implemented.
+ * The 4 COMPARE registers and the interruption are not implemented.
+ */
+
+#include "qemu/osdep.h"
+#include "qemu/log.h"
+#include "qemu/timer.h"
+#include "hw/timer/bcm2835_systmr.h"
+#include "hw/registerfields.h"
+#include "migration/vmstate.h"
+#include "trace.h"
+
+REG32(CTRL_STATUS,  0x00)
+REG32(COUNTER_LOW,  0x04)
+REG32(COUNTER_HIGH, 0x08)
+REG32(COMPARE0,     0x0c)
+REG32(COMPARE1,     0x10)
+REG32(COMPARE2,     0x14)
+REG32(COMPARE3,     0x18)
+
+static void bcm2835_systmr_update_irq(BCM2835SystemTimerState *s)
+{
+    bool enable = !!s->reg.status;
+
+    trace_bcm2835_systmr_irq(enable);
+    qemu_set_irq(s->irq, enable);
+}
+
+static void bcm2835_systmr_update_compare(BCM2835SystemTimerState *s,
+                                          unsigned timer_index)
+{
+    /* TODO fow now, since neither Linux nor U-boot use these timers. */
+    qemu_log_mask(LOG_UNIMP, "COMPARE register %u not implemented\n",
+                  timer_index);
+}
+
+static uint64_t bcm2835_systmr_read(void *opaque, hwaddr offset,
+                                    unsigned size)
+{
+    BCM2835SystemTimerState *s = BCM2835_SYSTIMER(opaque);
+    uint64_t r = 0;
+
+    switch (offset) {
+    case A_CTRL_STATUS:
+        r = s->reg.status;
+        break;
+    case A_COMPARE0 ... A_COMPARE3:
+        r = s->reg.compare[(offset - A_COMPARE0) >> 2];
+        break;
+    case A_COUNTER_LOW:
+    case A_COUNTER_HIGH:
+        /* Free running counter at 1MHz */
+        r = qemu_clock_get_us(QEMU_CLOCK_VIRTUAL);
+        r >>= 8 * (offset - A_COUNTER_LOW);
+        r &= UINT32_MAX;
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: bad offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    }
+    trace_bcm2835_systmr_read(offset, r);
+
+    return r;
+}
+
+static void bcm2835_systmr_write(void *opaque, hwaddr offset,
+                                 uint64_t value, unsigned size)
+{
+    BCM2835SystemTimerState *s = BCM2835_SYSTIMER(opaque);
+
+    trace_bcm2835_systmr_write(offset, value);
+    switch (offset) {
+    case A_CTRL_STATUS:
+        s->reg.status &= ~value; /* Ack */
+        bcm2835_systmr_update_irq(s);
+        break;
+    case A_COMPARE0 ... A_COMPARE3:
+        s->reg.compare[(offset - A_COMPARE0) >> 2] = value;
+        bcm2835_systmr_update_compare(s, (offset - A_COMPARE0) >> 2);
+        break;
+    case A_COUNTER_LOW:
+    case A_COUNTER_HIGH:
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: read-only ofs 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    default:
+        qemu_log_mask(LOG_GUEST_ERROR, "%s: bad offset 0x%" HWADDR_PRIx "\n",
+                      __func__, offset);
+        break;
+    }
+}
+
+static const MemoryRegionOps bcm2835_systmr_ops = {
+    .read = bcm2835_systmr_read,
+    .write = bcm2835_systmr_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .impl = {
+        .min_access_size = 4,
+        .max_access_size = 4,
+    },
+};
+
+static void bcm2835_systmr_reset(DeviceState *dev)
+{
+    BCM2835SystemTimerState *s = BCM2835_SYSTIMER(dev);
+
+    memset(&s->reg, 0, sizeof(s->reg));
+}
+
+static void bcm2835_systmr_realize(DeviceState *dev, Error **errp)
+{
+    BCM2835SystemTimerState *s = BCM2835_SYSTIMER(dev);
+
+    memory_region_init_io(&s->iomem, OBJECT(dev), &bcm2835_systmr_ops,
+                          s, "bcm2835-sys-timer", 0x20);
+    sysbus_init_mmio(SYS_BUS_DEVICE(dev), &s->iomem);
+    sysbus_init_irq(SYS_BUS_DEVICE(dev), &s->irq);
+}
+
+static const VMStateDescription bcm2835_systmr_vmstate = {
+    .name = "bcm2835_sys_timer",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .fields = (VMStateField[]) {
+        VMSTATE_UINT32(reg.status, BCM2835SystemTimerState),
+        VMSTATE_UINT32_ARRAY(reg.compare, BCM2835SystemTimerState, 4),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static void bcm2835_systmr_class_init(ObjectClass *klass, void *data)
+{
+    DeviceClass *dc = DEVICE_CLASS(klass);
+
+    dc->realize = bcm2835_systmr_realize;
+    dc->reset = bcm2835_systmr_reset;
+    dc->vmsd = &bcm2835_systmr_vmstate;
+}
+
+static const TypeInfo bcm2835_systmr_info = {
+    .name = TYPE_BCM2835_SYSTIMER,
+    .parent = TYPE_SYS_BUS_DEVICE,
+    .instance_size = sizeof(BCM2835SystemTimerState),
+    .class_init = bcm2835_systmr_class_init,
+};
+
+static void bcm2835_systmr_register_types(void)
+{
+    type_register_static(&bcm2835_systmr_info);
+}
+
+type_init(bcm2835_systmr_register_types);