aspeed: add support for the AST2500 SoC SMC controllers

The SMC controllers on the Aspeed AST2500 SoC are very similar to the
ones found on the AST2400. The differences are on the number of
supported flash modules and their default mappings in the SoC address
space.

The Aspeed AST2500 has one SPI controller for the BMC firmware and two
for the host firmware. All controllers have now the same set of
registers compatible with the AST2400 FMC controller and the legacy
'SMC' controller is fully gone.

We keep the FMC object to act as the BMC SPI controller and add a new
SPI controller for the host. We also have to introduce new type names
to handle the differences in the flash modules memory mappping.

Signed-off-by: Cédric Le Goater <clg@kaod.org>
Reviewed-by: Andrew Jeffery <andrew@aj.id.au>
Message-id: 1474977462-28032-5-git-send-email-clg@kaod.org
Signed-off-by: Peter Maydell <peter.maydell@linaro.org>

1 files changed, 27 insertions, 1 deletions

diff --git a/hw/ssi/aspeed_smc.c b/hw/ssi/aspeed_smc.c
index 84c18299de..21943f4e5d 100644
--- a/hw/ssi/aspeed_smc.c
+++ b/hw/ssi/aspeed_smc.c
@@ -130,6 +130,7 @@
 #define ASPEED_SOC_SMC_FLASH_BASE   0x10000000
 #define ASPEED_SOC_FMC_FLASH_BASE   0x20000000
 #define ASPEED_SOC_SPI_FLASH_BASE   0x30000000
+#define ASPEED_SOC_SPI2_FLASH_BASE  0x38000000
 
 /*
  * Default segments mapping addresses and size for each slave per
@@ -142,7 +143,7 @@ static const AspeedSegments aspeed_segments_legacy[] = {
 };
 
 static const AspeedSegments aspeed_segments_fmc[] = {
-    { 0x20000000, 64 * 1024 * 1024 },
+    { 0x20000000, 64 * 1024 * 1024 }, /* start address is readonly */
     { 0x24000000, 32 * 1024 * 1024 },
     { 0x26000000, 32 * 1024 * 1024 },
     { 0x28000000, 32 * 1024 * 1024 },
@@ -153,6 +154,22 @@ static const AspeedSegments aspeed_segments_spi[] = {
     { 0x30000000, 64 * 1024 * 1024 },
 };
 
+static const AspeedSegments aspeed_segments_ast2500_fmc[] = {
+    { 0x20000000, 128 * 1024 * 1024 }, /* start address is readonly */
+    { 0x28000000,  32 * 1024 * 1024 },
+    { 0x2A000000,  32 * 1024 * 1024 },
+};
+
+static const AspeedSegments aspeed_segments_ast2500_spi1[] = {
+    { 0x30000000, 32 * 1024 * 1024 }, /* start address is readonly */
+    { 0x32000000, 96 * 1024 * 1024 }, /* end address is readonly */
+};
+
+static const AspeedSegments aspeed_segments_ast2500_spi2[] = {
+    { 0x38000000, 32 * 1024 * 1024 }, /* start address is readonly */
+    { 0x3A000000, 96 * 1024 * 1024 }, /* end address is readonly */
+};
+
 static const AspeedSMCController controllers[] = {
     { "aspeed.smc.smc", R_CONF, R_CE_CTRL, R_CTRL0, R_TIMINGS,
       CONF_ENABLE_W0, 5, aspeed_segments_legacy,
@@ -163,6 +180,15 @@ static const AspeedSMCController controllers[] = {
     { "aspeed.smc.spi", R_SPI_CONF, 0xff, R_SPI_CTRL0, R_SPI_TIMINGS,
       SPI_CONF_ENABLE_W0, 1, aspeed_segments_spi,
       ASPEED_SOC_SPI_FLASH_BASE, 0x10000000 },
+    { "aspeed.smc.ast2500-fmc", R_CONF, R_CE_CTRL, R_CTRL0, R_TIMINGS,
+      CONF_ENABLE_W0, 3, aspeed_segments_ast2500_fmc,
+      ASPEED_SOC_FMC_FLASH_BASE, 0x10000000 },
+    { "aspeed.smc.ast2500-spi1", R_CONF, R_CE_CTRL, R_CTRL0, R_TIMINGS,
+      CONF_ENABLE_W0, 2, aspeed_segments_ast2500_spi1,
+      ASPEED_SOC_SPI_FLASH_BASE, 0x8000000 },
+    { "aspeed.smc.ast2500-spi2", R_CONF, R_CE_CTRL, R_CTRL0, R_TIMINGS,
+      CONF_ENABLE_W0, 2, aspeed_segments_ast2500_spi2,
+      ASPEED_SOC_SPI2_FLASH_BASE, 0x8000000 },
 };
 
 static uint64_t aspeed_smc_flash_default_read(void *opaque, hwaddr addr,