Intrdocue igb device emulation

This change introduces emulation for the Intel 82576 adapter, AKA igb.
The details of the device will be provided by the documentation that
will follow this change.

This initial implementation of igb does not cover the full feature set,
but it selectively implements changes necessary to pass tests of Linut
Test Project, and Windows HLK. The below is the list of the implemented
changes; anything not listed here is not implemented:

New features:
- igb advanced descriptor handling
- Support of 16 queues
- SRRCTL.BSIZEPACKET register field
- SRRCTL.RDMTS register field
- Tx descriptor completion writeback
- Extended RA registers
- VMDq feature
    - MRQC "Multiple Receive Queues Enable" register field
    - DTXSWC.Loopback_en register field
    - VMOLR.ROMPE register field
    - VMOLR.AUPE register field
    - VLVF.VLAN_id register field
    - VLVF.VI_En register field
- VF
    - Mailbox
    - Reset
- Extended interrupt registers
- Default values for IGP01E1000 PHY registers

Removed features:
- e1000e extended descriptor
- e1000e packet split descriptor
- Legacy descriptor
- PHY register paging
- MAC Registers
    - Legacy interrupt timer registers
    - Legacy EEPROM registers
    - PBA/POEM registers
    - RSRPD register
    - RFCTL.ACKDIS
    - RCTL.DTYPE
- Copper PHY registers

Misc:
- VET register format
- ICR register format

Signed-off-by: Gal Hammer <gal.hammer@sap.com>
Signed-off-by: Marcel Apfelbaum <marcel.apfelbaum@gmail.com>
Signed-off-by: Akihiko Odaki <akihiko.odaki@daynix.com>
[Jason: don't abort on msi(x)_init()]
Signed-off-by: Jason Wang <jasowang@redhat.com>

1 files changed, 32 insertions, 0 deletions

diff --git a/hw/net/trace-events b/hw/net/trace-events
index 2647cdc60f..65753411fc 100644
--- a/hw/net/trace-events
+++ b/hw/net/trace-events
@@ -270,6 +270,38 @@ e1000e_msix_use_vector_fail(uint32_t vec, int32_t res) "Failed to use MSI-X vect
 e1000e_mac_set_permanent(uint8_t b0, uint8_t b1, uint8_t b2, uint8_t b3, uint8_t b4, uint8_t b5) "Set permanent MAC: %02x:%02x:%02x:%02x:%02x:%02x"
 e1000e_cfg_support_virtio(bool support) "Virtio header supported: %d"
 
+# igb.c
+igb_write_config(uint32_t address, uint32_t val, int len) "CONFIG write 0x%"PRIx32", value: 0x%"PRIx32", len: %"PRId32
+igbvf_write_config(uint32_t address, uint32_t val, int len) "CONFIG write 0x%"PRIx32", value: 0x%"PRIx32", len: %"PRId32
+
+# igb_core.c
+igb_core_mdic_read(uint32_t addr, uint32_t data) "MDIC READ: PHY[%u] = 0x%x"
+igb_core_mdic_read_unhandled(uint32_t addr) "MDIC READ: PHY[%u] UNHANDLED"
+igb_core_mdic_write(uint32_t addr, uint32_t data) "MDIC WRITE: PHY[%u] = 0x%x"
+igb_core_mdic_write_unhandled(uint32_t addr) "MDIC WRITE: PHY[%u] UNHANDLED"
+
+igb_rx_desc_buff_size(uint32_t b) "buffer size: %u"
+igb_rx_desc_buff_write(uint64_t addr, uint16_t offset, const void* source, uint32_t len) "addr: 0x%"PRIx64", offset: %u, from: %p, length: %u"
+
+igb_rx_metadata_rss(uint32_t rss) "RSS data: 0x%X"
+
+igb_irq_icr_clear_gpie_nsicr(void) "Clearing ICR on read due to GPIE.NSICR enabled"
+igb_irq_icr_write(uint32_t bits, uint32_t old_icr, uint32_t new_icr) "Clearing ICR bits 0x%x: 0x%x --> 0x%x"
+igb_irq_set_iam(uint32_t icr) "Update IAM: 0x%x"
+igb_irq_read_iam(uint32_t icr) "Current IAM: 0x%x"
+igb_irq_write_eics(uint32_t val, bool msix) "Update EICS: 0x%x MSI-X: %d"
+igb_irq_write_eims(uint32_t val, bool msix) "Update EIMS: 0x%x MSI-X: %d"
+igb_irq_write_eimc(uint32_t val, uint32_t eims, bool msix) "Update EIMC: 0x%x EIMS: 0x%x MSI-X: %d"
+igb_irq_write_eiac(uint32_t val) "Update EIAC: 0x%x"
+igb_irq_write_eiam(uint32_t val, bool msix) "Update EIAM: 0x%x MSI-X: %d"
+igb_irq_write_eicr(uint32_t val, bool msix) "Update EICR: 0x%x MSI-X: %d"
+igb_irq_eitr_set(uint32_t eitr_num, uint32_t val) "EITR[%u] = 0x%x"
+igb_set_pfmailbox(uint32_t vf_num, uint32_t val) "PFMailbox[%d]: 0x%x"
+igb_set_vfmailbox(uint32_t vf_num, uint32_t val) "VFMailbox[%d]: 0x%x"
+
+# igbvf.c
+igbvf_wrn_io_addr_unknown(uint64_t addr) "IO unknown register 0x%"PRIx64
+
 # spapr_llan.c
 spapr_vlan_get_rx_bd_from_pool_found(int pool, int32_t count, uint32_t rx_bufs) "pool=%d count=%"PRId32" rxbufs=%"PRIu32
 spapr_vlan_get_rx_bd_from_page(int buf_ptr, uint64_t bd) "use_buf_ptr=%d bd=0x%016"PRIx64