hw: move target-independent files to subdirectories

This patch tackles all files that are compiled once, moving
them to subdirectories of hw/.

Signed-off-by: Paolo Bonzini <pbonzini@redhat.com>

1 files changed, 193 insertions, 0 deletions

diff --git a/hw/misc/max111x.c b/hw/misc/max111x.c
new file mode 100644
index 0000000000..d477ecdb29
--- /dev/null
+++ b/hw/misc/max111x.c
@@ -0,0 +1,193 @@
+/*
+ * Maxim MAX1110/1111 ADC chip emulation.
+ *
+ * Copyright (c) 2006 Openedhand Ltd.
+ * Written by Andrzej Zaborowski <balrog@zabor.org>
+ *
+ * This code is licensed under the GNU GPLv2.
+ *
+ * Contributions after 2012-01-13 are licensed under the terms of the
+ * GNU GPL, version 2 or (at your option) any later version.
+ */
+
+#include "hw/ssi.h"
+
+typedef struct {
+    SSISlave ssidev;
+    qemu_irq interrupt;
+    uint8_t tb1, rb2, rb3;
+    int cycle;
+
+    uint8_t input[8];
+    int inputs, com;
+} MAX111xState;
+
+/* Control-byte bitfields */
+#define CB_PD0		(1 << 0)
+#define CB_PD1		(1 << 1)
+#define CB_SGL		(1 << 2)
+#define CB_UNI		(1 << 3)
+#define CB_SEL0		(1 << 4)
+#define CB_SEL1		(1 << 5)
+#define CB_SEL2		(1 << 6)
+#define CB_START	(1 << 7)
+
+#define CHANNEL_NUM(v, b0, b1, b2)	\
+			((((v) >> (2 + (b0))) & 4) |	\
+			 (((v) >> (3 + (b1))) & 2) |	\
+			 (((v) >> (4 + (b2))) & 1))
+
+static uint32_t max111x_read(MAX111xState *s)
+{
+    if (!s->tb1)
+        return 0;
+
+    switch (s->cycle ++) {
+    case 1:
+        return s->rb2;
+    case 2:
+        return s->rb3;
+    }
+
+    return 0;
+}
+
+/* Interpret a control-byte */
+static void max111x_write(MAX111xState *s, uint32_t value)
+{
+    int measure, chan;
+
+    /* Ignore the value if START bit is zero */
+    if (!(value & CB_START))
+        return;
+
+    s->cycle = 0;
+
+    if (!(value & CB_PD1)) {
+        s->tb1 = 0;
+        return;
+    }
+
+    s->tb1 = value;
+
+    if (s->inputs == 8)
+        chan = CHANNEL_NUM(value, 1, 0, 2);
+    else
+        chan = CHANNEL_NUM(value & ~CB_SEL0, 0, 1, 2);
+
+    if (value & CB_SGL)
+        measure = s->input[chan] - s->com;
+    else
+        measure = s->input[chan] - s->input[chan ^ 1];
+
+    if (!(value & CB_UNI))
+        measure ^= 0x80;
+
+    s->rb2 = (measure >> 2) & 0x3f;
+    s->rb3 = (measure << 6) & 0xc0;
+
+    /* FIXME: When should the IRQ be lowered?  */
+    qemu_irq_raise(s->interrupt);
+}
+
+static uint32_t max111x_transfer(SSISlave *dev, uint32_t value)
+{
+    MAX111xState *s = FROM_SSI_SLAVE(MAX111xState, dev);
+    max111x_write(s, value);
+    return max111x_read(s);
+}
+
+static const VMStateDescription vmstate_max111x = {
+    .name = "max111x",
+    .version_id = 1,
+    .minimum_version_id = 1,
+    .minimum_version_id_old = 1,
+    .fields      = (VMStateField[]) {
+        VMSTATE_SSI_SLAVE(ssidev, MAX111xState),
+        VMSTATE_UINT8(tb1, MAX111xState),
+        VMSTATE_UINT8(rb2, MAX111xState),
+        VMSTATE_UINT8(rb3, MAX111xState),
+        VMSTATE_INT32_EQUAL(inputs, MAX111xState),
+        VMSTATE_INT32(com, MAX111xState),
+        VMSTATE_ARRAY_INT32_UNSAFE(input, MAX111xState, inputs,
+                                   vmstate_info_uint8, uint8_t),
+        VMSTATE_END_OF_LIST()
+    }
+};
+
+static int max111x_init(SSISlave *dev, int inputs)
+{
+    MAX111xState *s = FROM_SSI_SLAVE(MAX111xState, dev);
+
+    qdev_init_gpio_out(&dev->qdev, &s->interrupt, 1);
+
+    s->inputs = inputs;
+    /* TODO: add a user interface for setting these */
+    s->input[0] = 0xf0;
+    s->input[1] = 0xe0;
+    s->input[2] = 0xd0;
+    s->input[3] = 0xc0;
+    s->input[4] = 0xb0;
+    s->input[5] = 0xa0;
+    s->input[6] = 0x90;
+    s->input[7] = 0x80;
+    s->com = 0;
+
+    vmstate_register(&dev->qdev, -1, &vmstate_max111x, s);
+    return 0;
+}
+
+static int max1110_init(SSISlave *dev)
+{
+    return max111x_init(dev, 8);
+}
+
+static int max1111_init(SSISlave *dev)
+{
+    return max111x_init(dev, 4);
+}
+
+void max111x_set_input(DeviceState *dev, int line, uint8_t value)
+{
+    MAX111xState *s = FROM_SSI_SLAVE(MAX111xState, SSI_SLAVE_FROM_QDEV(dev));
+    assert(line >= 0 && line < s->inputs);
+    s->input[line] = value;
+}
+
+static void max1110_class_init(ObjectClass *klass, void *data)
+{
+    SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
+
+    k->init = max1110_init;
+    k->transfer = max111x_transfer;
+}
+
+static const TypeInfo max1110_info = {
+    .name          = "max1110",
+    .parent        = TYPE_SSI_SLAVE,
+    .instance_size = sizeof(MAX111xState),
+    .class_init    = max1110_class_init,
+};
+
+static void max1111_class_init(ObjectClass *klass, void *data)
+{
+    SSISlaveClass *k = SSI_SLAVE_CLASS(klass);
+
+    k->init = max1111_init;
+    k->transfer = max111x_transfer;
+}
+
+static const TypeInfo max1111_info = {
+    .name          = "max1111",
+    .parent        = TYPE_SSI_SLAVE,
+    .instance_size = sizeof(MAX111xState),
+    .class_init    = max1111_class_init,
+};
+
+static void max111x_register_types(void)
+{
+    type_register_static(&max1110_info);
+    type_register_static(&max1111_info);
+}
+
+type_init(max111x_register_types)