hw/loongarch/virt: Set iocsr address space per-board rather than percpu

LoongArch system has iocsr address space, most iocsr registers are
per-board, however some iocsr register spaces banked for percpu such
as ipi mailbox and extioi interrupt status. For banked iocsr space,
each cpu has the same iocsr space, but separate data.

This patch changes iocsr address space per-board rather percpu,
for iocsr registers specified for cpu, MemTxAttrs.requester_id
can be parsed for the cpu. With this patches, the total address space
on board will be simple, only iocsr address space and system memory,
rather than the number of cpu and system memory.

Signed-off-by: Bibo Mao <maobibo@loongson.cn>
Reviewed-by: Song Gao <gaosong@loongson.cn>
Message-Id: <20231215100333.3933632-3-maobibo@loongson.cn>
Signed-off-by: Song Gao <gaosong@loongson.cn>

1 files changed, 67 insertions, 24 deletions

diff --git a/hw/loongarch/virt.c b/hw/loongarch/virt.c
index 4b7dc67a2d..13d19b6da3 100644
--- a/hw/loongarch/virt.c
+++ b/hw/loongarch/virt.c
@@ -535,9 +535,6 @@ static void loongarch_irq_init(LoongArchMachineState *lams)
     CPUState *cpu_state;
     int cpu, pin, i, start, num;
 
-    extioi = qdev_new(TYPE_LOONGARCH_EXTIOI);
-    sysbus_realize_and_unref(SYS_BUS_DEVICE(extioi), &error_fatal);
-
     /*
      * The connection of interrupts:
      *   +-----+    +---------+     +-------+
@@ -559,36 +556,36 @@ static void loongarch_irq_init(LoongArchMachineState *lams)
      * | UARTs  | | Devices | | Devices |
      * +--------+ +---------+ +---------+
      */
+
+    /* Create IPI device */
+    ipi = qdev_new(TYPE_LOONGARCH_IPI);
+    qdev_prop_set_uint32(ipi, "num-cpu", ms->smp.cpus);
+    sysbus_realize_and_unref(SYS_BUS_DEVICE(ipi), &error_fatal);
+
+    /* IPI iocsr memory region */
+    memory_region_add_subregion(&lams->system_iocsr, SMP_IPI_MAILBOX,
+                   sysbus_mmio_get_region(SYS_BUS_DEVICE(ipi), 0));
+    memory_region_add_subregion(&lams->system_iocsr, MAIL_SEND_ADDR,
+                   sysbus_mmio_get_region(SYS_BUS_DEVICE(ipi), 1));
+
     for (cpu = 0; cpu < ms->smp.cpus; cpu++) {
         cpu_state = qemu_get_cpu(cpu);
         cpudev = DEVICE(cpu_state);
         lacpu = LOONGARCH_CPU(cpu_state);
         env = &(lacpu->env);
-
-        ipi = qdev_new(TYPE_LOONGARCH_IPI);
-        sysbus_realize_and_unref(SYS_BUS_DEVICE(ipi), &error_fatal);
+        env->address_space_iocsr = &lams->as_iocsr;
 
         /* connect ipi irq to cpu irq */
-        qdev_connect_gpio_out(ipi, 0, qdev_get_gpio_in(cpudev, IRQ_IPI));
-        /* IPI iocsr memory region */
-        memory_region_add_subregion(&env->system_iocsr, SMP_IPI_MAILBOX,
-                                    sysbus_mmio_get_region(SYS_BUS_DEVICE(ipi),
-                                    0));
-        memory_region_add_subregion(&env->system_iocsr, MAIL_SEND_ADDR,
-                                    sysbus_mmio_get_region(SYS_BUS_DEVICE(ipi),
-                                    1));
-        /*
-	 * extioi iocsr memory region
-	 * only one extioi is added on loongarch virt machine
-	 * external device interrupt can only be routed to cpu 0-3
-	 */
-	if (cpu < EXTIOI_CPUS)
-            memory_region_add_subregion(&env->system_iocsr, APIC_BASE,
-                                sysbus_mmio_get_region(SYS_BUS_DEVICE(extioi),
-                                cpu));
+        qdev_connect_gpio_out(ipi, cpu, qdev_get_gpio_in(cpudev, IRQ_IPI));
         env->ipistate = ipi;
     }
 
+    /* Create EXTIOI device */
+    extioi = qdev_new(TYPE_LOONGARCH_EXTIOI);
+    sysbus_realize_and_unref(SYS_BUS_DEVICE(extioi), &error_fatal);
+    memory_region_add_subregion(&lams->system_iocsr, APIC_BASE,
+                   sysbus_mmio_get_region(SYS_BUS_DEVICE(extioi), 0));
+
     /*
      * connect ext irq to the cpu irq
      * cpu_pin[9:2] <= intc_pin[7:0]
@@ -733,6 +730,43 @@ static void loongarch_direct_kernel_boot(LoongArchMachineState *lams,
     }
 }
 
+static void loongarch_qemu_write(void *opaque, hwaddr addr,
+                                 uint64_t val, unsigned size)
+{
+}
+
+static uint64_t loongarch_qemu_read(void *opaque, hwaddr addr, unsigned size)
+{
+    switch (addr) {
+    case VERSION_REG:
+        return 0x11ULL;
+    case FEATURE_REG:
+        return 1ULL << IOCSRF_MSI | 1ULL << IOCSRF_EXTIOI |
+               1ULL << IOCSRF_CSRIPI;
+    case VENDOR_REG:
+        return 0x6e6f73676e6f6f4cULL; /* "Loongson" */
+    case CPUNAME_REG:
+        return 0x303030354133ULL;     /* "3A5000" */
+    case MISC_FUNC_REG:
+        return 1ULL << IOCSRM_EXTIOI_EN;
+    }
+    return 0ULL;
+}
+
+static const MemoryRegionOps loongarch_qemu_ops = {
+    .read = loongarch_qemu_read,
+    .write = loongarch_qemu_write,
+    .endianness = DEVICE_LITTLE_ENDIAN,
+    .valid = {
+        .min_access_size = 4,
+        .max_access_size = 8,
+    },
+    .impl = {
+        .min_access_size = 8,
+        .max_access_size = 8,
+    },
+};
+
 static void loongarch_init(MachineState *machine)
 {
     LoongArchCPU *lacpu;
@@ -761,8 +795,17 @@ static void loongarch_init(MachineState *machine)
         exit(1);
     }
     create_fdt(lams);
-    /* Init CPUs */
 
+    /* Create IOCSR space */
+    memory_region_init_io(&lams->system_iocsr, OBJECT(machine), NULL,
+                          machine, "iocsr", UINT64_MAX);
+    address_space_init(&lams->as_iocsr, &lams->system_iocsr, "IOCSR");
+    memory_region_init_io(&lams->iocsr_mem, OBJECT(machine),
+                          &loongarch_qemu_ops,
+                          machine, "iocsr_misc", 0x428);
+    memory_region_add_subregion(&lams->system_iocsr, 0, &lams->iocsr_mem);
+
+    /* Init CPUs */
     possible_cpus = mc->possible_cpu_arch_ids(machine);
     for (i = 0; i < possible_cpus->len; i++) {
         cpu = cpu_create(machine->cpu_type);