aspeed/intc: Add AST2700 support

AST2700 interrupt controller(INTC) provides hardware interrupt interfaces
to interrupt of processors PSP, SSP and TSP. In INTC, each interrupt of
INT 128 to INT136 combines 32 interrupts.

Introduce a new aspeed_intc class with instance_init and realize handlers.

So far, this model only supports GICINT128 to GICINT136.
It creates 9 GICINT or-gates to connect 32 interrupts sources
from GICINT128 to GICINT136 as IRQ GPIO-OUTPUT pins.
Then, this model registers IRQ handler with its IRQ GPIO-INPUT pins which
connect to GICINT or-gates. And creates 9 GICINT IRQ GPIO-OUTPUT pins which
connect to GIC device with GIC IRQ 128 to 136.

If one interrupt source from GICINT128 to GICINT136
set irq, the OR-GATE irq callback function is called and set irq to INTC by
OR-GATE GPIO-OUTPUT pins. Then, the INTC irq callback function is called and
set irq to GIC by its GICINT IRQ GPIO-OUTPUT pins. Finally, the GIC irq
callback function is called and set irq to CPUs and
CPUs execute Interrupt Service Routine (ISR).

Block diagram of GICINT132:

            GICINT132
  ETH1    +-----------+
+-------->+0         3|
  ETH2    |          4|
+-------->+1         5|
  ETH3    |          6|
+-------->+2        19|                          INTC                          GIC
  UART0   |         20|            +--------------------------+
+-------->+7        21|            |                          |            +--------------+
  UART1   |         22|            |orgate0 +----> output_pin0+----------->+GIC128        |
+-------->+8        23|            |                          |            |              |
  UART2   |         24|            |orgate1 +----> output_pin1+----------->+GIC129        |
+-------->+9        25|            |                          |            |              |
  UART3   |         26|            |orgate2 +----> output_pin2+----------->+GIC130        |
+--------->10       27|            |                          |            |              |
  UART5   |         28|            |orgate3 +----> output_pin3+----------->+GIC131        |
+-------->+11       29|            |                          |            |              |
  UART6   |           +----------->+orgate4 +----> output_pin4+----------->+GIC132        |
+-------->+12       30|            |                          |            |              |
  UART7   |         31|            |orgate5 +----> output_pin5+----------->+GIC133        |
+-------->+13         |            |                          |            |              |
  UART8   |  OR[0:31] |            |orgate6 +----> output_pin6+----------->+GIC134        |
---------->14         |            |                          |            |              |
  UART9   |           |            |orgate7 +----> output_pin7+----------->+GIC135        |
--------->+15         |            |                          |            |              |
  UART10  |           |            |orgate8 +----> output_pin8+----------->+GIC136        |
--------->+16         |            |                          |            +--------------+
  UART11  |           |            +--------------------------+
+-------->+17         |
  UART12  |           |
+--------->18         |
          |           |
          |           |
          |           |
          +-----------+

Signed-off-by: Troy Lee <troy_lee@aspeedtech.com>
Signed-off-by: Jamin Lin <jamin_lin@aspeedtech.com>
Reviewed-by: Cédric Le Goater <clg@redhat.com>
[clg: Fixed class_size in TYPE_ASPEED_INTC definition ]

1 files changed, 13 insertions, 0 deletions

diff --git a/hw/intc/trace-events b/hw/intc/trace-events
index b815cea129..3dcf147198 100644
--- a/hw/intc/trace-events
+++ b/hw/intc/trace-events
@@ -79,6 +79,19 @@ aspeed_vic_update_fiq(int flags) "Raising FIQ: %d"
 aspeed_vic_update_irq(int flags) "Raising IRQ: %d"
 aspeed_vic_read(uint64_t offset, unsigned size, uint32_t value) "From 0x%" PRIx64 " of size %u: 0x%" PRIx32
 aspeed_vic_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+# aspeed_intc.c
+aspeed_intc_read(uint64_t offset, unsigned size, uint32_t value) "From 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_intc_write(uint64_t offset, unsigned size, uint32_t data) "To 0x%" PRIx64 " of size %u: 0x%" PRIx32
+aspeed_intc_set_irq(int irq, int level) "Set IRQ %d: %d"
+aspeed_intc_clear_irq(int irq, int level) "Clear IRQ %d: %d"
+aspeed_intc_update_irq(int irq, int level) "Update IRQ: %d: %d"
+aspeed_intc_pending_irq(int irq, uint32_t value) "Pending IRQ: %d: 0x%x"
+aspeed_intc_trigger_irq(int irq, uint32_t value) "Trigger IRQ: %d: 0x%x"
+aspeed_intc_all_isr_done(int irq) "All source ISR execution are done: %d"
+aspeed_intc_enable(uint32_t value) "Enable: 0x%x"
+aspeed_intc_select(uint32_t value) "Select: 0x%x"
+aspeed_intc_mask(uint32_t change, uint32_t value) "Mask: 0x%x: 0x%x"
+aspeed_intc_unmask(uint32_t change, uint32_t value) "UnMask: 0x%x: 0x%x"
 
 # arm_gic.c
 gic_enable_irq(int irq) "irq %d enabled"