added flags computation optimization

git-svn-id: svn://svn.savannah.nongnu.org/qemu/trunk@34 c046a42c-6fe2-441c-8c8c-71466251a162

1 files changed, 237 insertions, 0 deletions

diff --git a/dis-asm.h b/dis-asm.h
new file mode 100644
index 0000000000..bd7e47844c
--- /dev/null
+++ b/dis-asm.h
@@ -0,0 +1,237 @@
+/* Interface between the opcode library and its callers.
+   Written by Cygnus Support, 1993.
+
+   The opcode library (libopcodes.a) provides instruction decoders for
+   a large variety of instruction sets, callable with an identical
+   interface, for making instruction-processing programs more independent
+   of the instruction set being processed.  */
+
+#ifndef DIS_ASM_H
+#define DIS_ASM_H
+
+#include <stdio.h>
+#include "bfd.h"
+
+typedef int (*fprintf_ftype) PARAMS((FILE*, const char*, ...));
+
+enum dis_insn_type {
+  dis_noninsn,			/* Not a valid instruction */
+  dis_nonbranch,		/* Not a branch instruction */
+  dis_branch,			/* Unconditional branch */
+  dis_condbranch,		/* Conditional branch */
+  dis_jsr,			/* Jump to subroutine */
+  dis_condjsr,			/* Conditional jump to subroutine */
+  dis_dref,			/* Data reference instruction */
+  dis_dref2			/* Two data references in instruction */
+};
+
+/* This struct is passed into the instruction decoding routine, 
+   and is passed back out into each callback.  The various fields are used
+   for conveying information from your main routine into your callbacks,
+   for passing information into the instruction decoders (such as the
+   addresses of the callback functions), or for passing information
+   back from the instruction decoders to their callers.
+
+   It must be initialized before it is first passed; this can be done
+   by hand, or using one of the initialization macros below.  */
+
+typedef struct disassemble_info {
+  fprintf_ftype fprintf_func;
+  FILE *stream;
+  PTR application_data;
+
+  /* Target description.  We could replace this with a pointer to the bfd,
+     but that would require one.  There currently isn't any such requirement
+     so to avoid introducing one we record these explicitly.  */
+  /* The bfd_flavour.  This can be bfd_target_unknown_flavour.  */
+  enum bfd_flavour flavour;
+  /* The bfd_arch value.  */
+  enum bfd_architecture arch;
+  /* The bfd_mach value.  */
+  unsigned long mach;
+  /* Endianness (for bi-endian cpus).  Mono-endian cpus can ignore this.  */
+  enum bfd_endian endian;
+
+  /* An array of pointers to symbols either at the location being disassembled
+     or at the start of the function being disassembled.  The array is sorted
+     so that the first symbol is intended to be the one used.  The others are
+     present for any misc. purposes.  This is not set reliably, but if it is
+     not NULL, it is correct.  */
+  asymbol **symbols;
+  /* Number of symbols in array.  */
+  int num_symbols;
+
+  /* For use by the disassembler.
+     The top 16 bits are reserved for public use (and are documented here).
+     The bottom 16 bits are for the internal use of the disassembler.  */
+  unsigned long flags;
+#define INSN_HAS_RELOC	0x80000000
+  PTR private_data;
+
+  /* Function used to get bytes to disassemble.  MEMADDR is the
+     address of the stuff to be disassembled, MYADDR is the address to
+     put the bytes in, and LENGTH is the number of bytes to read.
+     INFO is a pointer to this struct.
+     Returns an errno value or 0 for success.  */
+  int (*read_memory_func)
+    PARAMS ((bfd_vma memaddr, bfd_byte *myaddr, int length,
+	     struct disassemble_info *info));
+
+  /* Function which should be called if we get an error that we can't
+     recover from.  STATUS is the errno value from read_memory_func and
+     MEMADDR is the address that we were trying to read.  INFO is a
+     pointer to this struct.  */
+  void (*memory_error_func)
+    PARAMS ((int status, bfd_vma memaddr, struct disassemble_info *info));
+
+  /* Function called to print ADDR.  */
+  void (*print_address_func)
+    PARAMS ((bfd_vma addr, struct disassemble_info *info));
+
+  /* Function called to determine if there is a symbol at the given ADDR.
+     If there is, the function returns 1, otherwise it returns 0.
+     This is used by ports which support an overlay manager where
+     the overlay number is held in the top part of an address.  In
+     some circumstances we want to include the overlay number in the
+     address, (normally because there is a symbol associated with
+     that address), but sometimes we want to mask out the overlay bits.  */
+  int (* symbol_at_address_func)
+    PARAMS ((bfd_vma addr, struct disassemble_info * info));
+
+  /* These are for buffer_read_memory.  */
+  bfd_byte *buffer;
+  bfd_vma buffer_vma;
+  int buffer_length;
+
+  /* This variable may be set by the instruction decoder.  It suggests
+      the number of bytes objdump should display on a single line.  If
+      the instruction decoder sets this, it should always set it to
+      the same value in order to get reasonable looking output.  */
+  int bytes_per_line;
+
+  /* the next two variables control the way objdump displays the raw data */
+  /* For example, if bytes_per_line is 8 and bytes_per_chunk is 4, the */
+  /* output will look like this:
+     00:   00000000 00000000
+     with the chunks displayed according to "display_endian". */
+  int bytes_per_chunk;
+  enum bfd_endian display_endian;
+
+  /* Results from instruction decoders.  Not all decoders yet support
+     this information.  This info is set each time an instruction is
+     decoded, and is only valid for the last such instruction.
+
+     To determine whether this decoder supports this information, set
+     insn_info_valid to 0, decode an instruction, then check it.  */
+
+  char insn_info_valid;		/* Branch info has been set. */
+  char branch_delay_insns;	/* How many sequential insn's will run before
+				   a branch takes effect.  (0 = normal) */
+  char data_size;		/* Size of data reference in insn, in bytes */
+  enum dis_insn_type insn_type;	/* Type of instruction */
+  bfd_vma target;		/* Target address of branch or dref, if known;
+				   zero if unknown.  */
+  bfd_vma target2;		/* Second target address for dref2 */
+
+} disassemble_info;
+
+
+/* Standard disassemblers.  Disassemble one instruction at the given
+   target address.  Return number of bytes processed.  */
+typedef int (*disassembler_ftype)
+     PARAMS((bfd_vma, disassemble_info *));
+
+extern int print_insn_big_mips		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_little_mips	PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_i386		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_m68k		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_z8001		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_z8002		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_h8300		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_h8300h		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_h8300s		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_h8500		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_alpha		PARAMS ((bfd_vma, disassemble_info*));
+extern disassembler_ftype arc_get_disassembler PARAMS ((int, int));
+extern int print_insn_big_arm		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_little_arm	PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_sparc		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_big_a29k		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_little_a29k	PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_i960		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_sh		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_shl		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_hppa		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_m32r		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_m88k		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_mn10200		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_mn10300		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_ns32k		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_big_powerpc	PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_little_powerpc	PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_rs6000		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_w65		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_d10v		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_v850		PARAMS ((bfd_vma, disassemble_info*));
+extern int print_insn_tic30		PARAMS ((bfd_vma, disassemble_info*));
+
+/* Fetch the disassembler for a given BFD, if that support is available.  */
+extern disassembler_ftype disassembler	PARAMS ((bfd *));
+
+
+/* This block of definitions is for particular callers who read instructions
+   into a buffer before calling the instruction decoder.  */
+
+/* Here is a function which callers may wish to use for read_memory_func.
+   It gets bytes from a buffer.  */
+extern int buffer_read_memory
+  PARAMS ((bfd_vma, bfd_byte *, int, struct disassemble_info *));
+
+/* This function goes with buffer_read_memory.
+   It prints a message using info->fprintf_func and info->stream.  */
+extern void perror_memory PARAMS ((int, bfd_vma, struct disassemble_info *));
+
+
+/* Just print the address in hex.  This is included for completeness even
+   though both GDB and objdump provide their own (to print symbolic
+   addresses).  */
+extern void generic_print_address
+  PARAMS ((bfd_vma, struct disassemble_info *));
+
+/* Always true.  */
+extern int generic_symbol_at_address
+  PARAMS ((bfd_vma, struct disassemble_info *));
+
+/* Macro to initialize a disassemble_info struct.  This should be called
+   by all applications creating such a struct.  */
+#define INIT_DISASSEMBLE_INFO(INFO, STREAM, FPRINTF_FUNC) \
+  (INFO).flavour = bfd_target_unknown_flavour, \
+  (INFO).arch = bfd_arch_unknown, \
+  (INFO).mach = 0, \
+  (INFO).endian = BFD_ENDIAN_UNKNOWN, \
+  INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC)
+
+/* Call this macro to initialize only the internal variables for the
+   disassembler.  Architecture dependent things such as byte order, or machine
+   variant are not touched by this macro.  This makes things much easier for
+   GDB which must initialize these things seperatly.  */
+
+#define INIT_DISASSEMBLE_INFO_NO_ARCH(INFO, STREAM, FPRINTF_FUNC) \
+  (INFO).fprintf_func = (FPRINTF_FUNC), \
+  (INFO).stream = (STREAM), \
+  (INFO).symbols = NULL, \
+  (INFO).num_symbols = 0, \
+  (INFO).buffer = NULL, \
+  (INFO).buffer_vma = 0, \
+  (INFO).buffer_length = 0, \
+  (INFO).read_memory_func = buffer_read_memory, \
+  (INFO).memory_error_func = perror_memory, \
+  (INFO).print_address_func = generic_print_address, \
+  (INFO).symbol_at_address_func = generic_symbol_at_address, \
+  (INFO).flags = 0, \
+  (INFO).bytes_per_line = 0, \
+  (INFO).bytes_per_chunk = 0, \
+  (INFO).display_endian = BFD_ENDIAN_UNKNOWN, \
+  (INFO).insn_info_valid = 0
+
+#endif /* ! defined (DIS_ASM_H) */