diff options
| author | Peter Delevoryas <pdel@fb.com> | 2022-06-30 09:21:13 +0200 |
|---|---|---|
| committer | Cédric Le Goater <clg@kaod.org> | 2022-06-30 09:21:13 +0200 |
| commit | b582b7a191f23c3f862c3b3aef96d6136508c07f (patch) | |
| tree | 302168a5335701a24d57a157129999857bb4342d | |
| parent | ceb3ff0e802bf7e373b1dbcff51541eefff25513 (diff) | |
hw/i2c/aspeed: Fix DMA len write-enable bit handling
I noticed i2c rx transfers were getting shortened to "1" on Zephyr. It
seems to be because the Zephyr i2c driver sets the RX DMA len with the
RX field write-enable bit set (bit 31) to avoid a read-modify-write. [1]
/* 0x1C : I2CM Master DMA Transfer Length Register */
I think we should be checking the write-enable bits on the incoming
value, not checking the register array. I'm not sure we're even writing
the write-enable bits to the register array, actually.
[1] https://github.com/AspeedTech-BMC/zephyr/blob/db3dbcc9c52e67a47180890ac938ed380b33f91c/drivers/i2c/i2c_aspeed.c#L145-L148
Fixes: ba2cccd64e90f34 ("aspeed: i2c: Add new mode support")
Signed-off-by: Peter Delevoryas <pdel@fb.com>
Message-Id: <20220630045133.32251-3-me@pjd.dev>
Reviewed-by: Cédric Le Goater <clg@kaod.org>
Signed-off-by: Cédric Le Goater <clg@kaod.org>
| -rw-r--r-- | hw/i2c/aspeed_i2c.c | 8 |
1 files changed, 4 insertions, 4 deletions
diff --git a/hw/i2c/aspeed_i2c.c b/hw/i2c/aspeed_i2c.c index 6429ab1874..4e32b147ec 100644 --- a/hw/i2c/aspeed_i2c.c +++ b/hw/i2c/aspeed_i2c.c @@ -644,18 +644,18 @@ static void aspeed_i2c_bus_new_write(AspeedI2CBus *bus, hwaddr offset, RX_BUF_LEN) + 1; break; case A_I2CM_DMA_LEN: - w1t = ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN, RX_BUF_LEN_W1T) || - ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN, TX_BUF_LEN_W1T); + w1t = FIELD_EX32(value, I2CM_DMA_LEN, RX_BUF_LEN_W1T) || + FIELD_EX32(value, I2CM_DMA_LEN, TX_BUF_LEN_W1T); /* If none of the w1t bits are set, just write to the reg as normal. */ if (!w1t) { bus->regs[R_I2CM_DMA_LEN] = value; break; } - if (ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN, RX_BUF_LEN_W1T)) { + if (FIELD_EX32(value, I2CM_DMA_LEN, RX_BUF_LEN_W1T)) { ARRAY_FIELD_DP32(bus->regs, I2CM_DMA_LEN, RX_BUF_LEN, FIELD_EX32(value, I2CM_DMA_LEN, RX_BUF_LEN)); } - if (ARRAY_FIELD_EX32(bus->regs, I2CM_DMA_LEN, TX_BUF_LEN_W1T)) { + if (FIELD_EX32(value, I2CM_DMA_LEN, TX_BUF_LEN_W1T)) { ARRAY_FIELD_DP32(bus->regs, I2CM_DMA_LEN, TX_BUF_LEN, FIELD_EX32(value, I2CM_DMA_LEN, TX_BUF_LEN)); } |