Docs restructure (#2953)

Needs to be merged into `gh-pages` later on.

33 files changed, 364 insertions, 708 deletions

diff --git a/docs/FAQ.md b/docs/FAQ.md
index 20002072..757bf962 100644
--- a/docs/FAQ.md
+++ b/docs/FAQ.md
@@ -24,7 +24,7 @@ No, although a good portion of the Matrix specification has been implemented. Mo
 
 Dendrite development is currently supported by a small team of developers and due to those limited resources, the majority of the effort is focused on getting Dendrite to be 
 specification complete. If there are major features you're requesting (e.g. new administration endpoints), we'd like to strongly encourage you to join the community in supporting 
-the development efforts through [contributing](https://matrix-org.github.io/dendrite/development/contributing). 
+the development efforts through [contributing](../development/contributing). 
 
 ## Is there a migration path from Synapse to Dendrite?
 
@@ -103,7 +103,7 @@ This can be done by performing a room upgrade. Use the command `/upgraderoom <ve
 
 ## How do I reset somebody's password on my server?
 
-Use the admin endpoint [resetpassword](https://matrix-org.github.io/dendrite/administration/adminapi#post-_dendriteadminresetpassworduserid)
+Use the admin endpoint [resetpassword](./administration/adminapi#post-_dendriteadminresetpassworduserid)
 
 ## Should I use PostgreSQL or SQLite for my databases?
 
@@ -157,7 +157,7 @@ You may need to revisit the connection limit of your PostgreSQL server and/or ma
 
 ## VOIP and Video Calls don't appear to work on Dendrite
 
-There is likely an issue with your STUN/TURN configuration on the server. If you believe your configuration to be correct, please see the [troubleshooting](administration/5_troubleshooting.md) for troubleshooting recommendations.
+There is likely an issue with your STUN/TURN configuration on the server. If you believe your configuration to be correct, please see the [troubleshooting](administration/6_troubleshooting.md) for troubleshooting recommendations.
 
 ## What is being reported when enabling phone-home statistics?
 
diff --git a/docs/INSTALL.md b/docs/INSTALL.md
index ccfc5810..8e72da97 100644
--- a/docs/INSTALL.md
+++ b/docs/INSTALL.md
@@ -6,8 +6,8 @@ or alternatively, in the [installation](installation/) folder:
 
 1. [Planning your deployment](installation/1_planning.md)
 2. [Setting up the domain](installation/2_domainname.md)
-3. [Preparing database storage](installation/3_database.md)
-4. [Generating signing keys](installation/4_signingkey.md)
-5. [Installing as a monolith](installation/5_install_monolith.md)
-6. [Populate the configuration](installation/7_configuration.md)
-7. [Starting the monolith](installation/8_starting_monolith.md)
+3. [Installing Dendrite](installation/manual/1_build.md)
+4. [Preparing database storage](installation/manual/2_database.md)
+5. [Populate the configuration](installation/manual/3_configuration.md)
+6. [Generating signing keys](installation/manual/4_signingkey.md)
+7. [Starting Dendrite](installation/manual/5_starting_dendrite.md)
diff --git a/docs/administration/1_createusers.md b/docs/administration/1_createusers.md
index 24eba666..cbdccd18 100644
--- a/docs/administration/1_createusers.md
+++ b/docs/administration/1_createusers.md
@@ -11,10 +11,9 @@ User accounts can be created on a Dendrite instance in a number of ways.
 
 ## From the command line
 
-The `create-account` tool is built in the `bin` folder when building Dendrite with
-the `build.sh` script.
+The `create-account` tool is built in the `bin` folder when [building](../installation/build) Dendrite.
 
-It uses the `dendrite.yaml` configuration file to connect to a running Dendrite instance and requires
+It uses the `dendrite.yaml` configuration file to connect to a **running** Dendrite instance and requires
 shared secret registration to be enabled as explained below.
 
 An example of using `create-account` to create a **normal account**:
diff --git a/docs/administration/4_adminapi.md b/docs/administration/4_adminapi.md
index b11aeb1a..6f645899 100644
--- a/docs/administration/4_adminapi.md
+++ b/docs/administration/4_adminapi.md
@@ -1,6 +1,7 @@
 ---
 title: Supported admin APIs
 parent: Administration
+nav_order: 4
 permalink: /administration/adminapi
 ---
 
@@ -49,13 +50,17 @@ the room IDs of all affected rooms.
 
 ## POST `/_dendrite/admin/resetPassword/{userID}`
 
-Reset the password of a local user.
+Reset the password of a local user. 
+
+**If `logout_devices` is set to `true`, all `access_tokens` will be invalidated, resulting
+in the potential loss of encrypted messages**
 
 Request body format:
 
-```
+```json
 {
-    "password": "new_password_here"
+    "password": "new_password_here",
+    "logout_devices": false
 }
 ```
 
@@ -68,11 +73,14 @@ Indexing is done in the background, the server logs every 1000 events (or below)
 
 This endpoint instructs Dendrite to immediately query `/devices/{userID}` on a federated server. An empty JSON body will be returned on success, updating all locally stored user devices/keys. This can be used to possibly resolve E2EE issues, where the remote user can't decrypt messages.
 
+## POST `/_dendrite/admin/purgeRoom/{roomID}`
+
+This endpoint instructs Dendrite to remove the given room from its database. Before doing so, it will evacuate all local users from the room. It does **NOT** remove media files. Depending on the size of the room, this may take a while. Will return an empty JSON once other components were instructed to delete the room.
 
 ## POST `/_synapse/admin/v1/send_server_notice`
 
 Request body format:
-```
+```json
 {
     "user_id": "@target_user:server_name",
     "content": {
@@ -85,7 +93,7 @@ Request body format:
 Send a server notice to a specific user. See the [Matrix Spec](https://spec.matrix.org/v1.3/client-server-api/#server-notices) for additional details on server notice behaviour.
 If successfully sent, the API will return the following response:
 
-```
+```json
 {
      "event_id": "<event_id>"
 }
diff --git a/docs/installation/11_optimisation.md b/docs/administration/5_optimisation.md
index 686ec2eb..b327171e 100644
--- a/docs/installation/11_optimisation.md
+++ b/docs/administration/5_optimisation.md
@@ -1,9 +1,9 @@
 ---
 title: Optimise your installation
-parent: Installation
+parent: Administration
 has_toc: true
-nav_order: 11
-permalink: /installation/start/optimisation
+nav_order: 5
+permalink: /administration/optimisation
 ---
 
 # Optimise your installation
@@ -36,11 +36,6 @@ connections it will open to the database.
 **If you are using the `global` database pool** then you only need to configure the
 `max_open_conns` setting once in the `global` section.
 
-**If you are defining a `database` config per component** then you will need to ensure that
-the **sum total** of all configured `max_open_conns` to a given database server do not exceed
-the connection limit. If you configure a total that adds up to more connections than are available
-then this will cause database queries to fail.
-
 You may wish to raise the `max_connections` limit on your PostgreSQL server to accommodate
 additional connections, in which case you should also update the `max_open_conns` in your
 Dendrite configuration accordingly. However be aware that this is only advisable on particularly
diff --git a/docs/administration/5_troubleshooting.md b/docs/administration/6_troubleshooting.md
index 8ba510ef..5f11f993 100644
--- a/docs/administration/5_troubleshooting.md
+++ b/docs/administration/6_troubleshooting.md
@@ -1,6 +1,7 @@
 ---
 title: Troubleshooting
 parent: Administration
+nav_order: 6
 permalink: /administration/troubleshooting
 ---
 
@@ -18,7 +19,7 @@ be clues in the logs.
 You can increase this log level to the more verbose `debug` level if necessary by adding
 this to the config and restarting Dendrite:
 
-```
+```yaml
 logging:
 - type: std
   level: debug
@@ -56,12 +57,7 @@ number of database connections does not exceed the maximum allowed by PostgreSQL
 
 Open your `postgresql.conf` configuration file and check the value of `max_connections`
 (which is typically `100` by default). Then open your `dendrite.yaml` configuration file
-and ensure that:
-
-1. If you are using the `global.database` section, that `max_open_conns` does not exceed
-   that number;
-2. If you are **not** using the `global.database` section, that the sum total of all
-   `max_open_conns` across all `database` blocks does not exceed that number.
+and ensure that in the `global.database` section, `max_open_conns` does not exceed that number.
 
 ## 5. File descriptors
 
@@ -77,7 +73,7 @@ If there aren't, you will see a log lines like this:
 level=warning msg="IMPORTANT: Process file descriptor limit is currently 65535, it is recommended to raise the limit for Dendrite to at least 65535 to avoid issues"
 ```
 
-Follow the [Optimisation](../installation/11_optimisation.md) instructions to correct the
+Follow the [Optimisation](5_optimisation.md) instructions to correct the
 available number of file descriptors.
 
 ## 6. STUN/TURN Server tester
diff --git a/docs/caddy/monolith/Caddyfile b/docs/caddy/Caddyfile
index 82567c4a..82567c4a 100644
--- a/docs/caddy/monolith/Caddyfile
+++ b/docs/caddy/Caddyfile
diff --git a/docs/caddy/polylith/Caddyfile b/docs/caddy/polylith/Caddyfile
deleted file mode 100644
index c2d81b49..00000000
--- a/docs/caddy/polylith/Caddyfile
+++ /dev/null
@@ -1,85 +0,0 @@
-# Sample Caddyfile for using Caddy in front of Dendrite
-
-#
-
-# Customize email address and domain names
-
-# Optional settings commented out
-
-#
-
-# BE SURE YOUR DOMAINS ARE POINTED AT YOUR SERVER FIRST
-
-# Documentation: <https://caddyserver.com/docs/>
-
-#
-
-# Bonus tip: If your IP address changes, use Caddy's
-
-# dynamic DNS plugin to update your DNS records to
-
-# point to your new IP automatically
-
-# <https://github.com/mholt/caddy-dynamicdns>
-
-#
-
-# Global options block
-
-{
- # In case there is a problem with your certificates.
- # email example@example.com
-
- # Turn off the admin endpoint if you don't need graceful config
- # changes and/or are running untrusted code on your machine.
- # admin off
-
- # Enable this if your clients don't send ServerName in TLS handshakes.
- # default_sni example.com
-
- # Enable debug mode for verbose logging.
- # debug
-
- # Use Let's Encrypt's staging endpoint for testing.
- # acme_ca https://acme-staging-v02.api.letsencrypt.org/directory
-
- # If you're port-forwarding HTTP/HTTPS ports from 80/443 to something
- # else, enable these and put the alternate port numbers here.
- # http_port  8080
- # https_port 8443
-}
-
-# The server name of your matrix homeserver. This example shows
-
-# "well-known delegation" from the registered domain to a subdomain
-
-# which is only needed if your server_name doesn't match your Matrix
-
-# homeserver URL (i.e. you can show users a vanity domain that looks
-
-# nice and is easy to remember but still have your Matrix server on
-
-# its own subdomain or hosted service)
-
-example.com {
- header /.well-known/matrix/*Content-Type application/json
- header /.well-known/matrix/* Access-Control-Allow-Origin *
- respond /.well-known/matrix/server `{"m.server": "matrix.example.com:443"}`
- respond /.well-known/matrix/client `{"m.homeserver": {"base_url": "https://matrix.example.com"}}`
-}
-
-# The actual domain name whereby your Matrix server is accessed
-
-matrix.example.com {
- # Change the end of each reverse_proxy line to the correct
- # address for your various services.
- @sync_api {
-  path_regexp /_matrix/client/.*?/(sync|user/.*?/filter/?.*|keys/changes|rooms/.*?/(messages|.*?_?members|context/.*?|relations/.*?|event/.*?))$
- }
- reverse_proxy @sync_api sync_api:8073
-
- reverse_proxy /_matrix/client* client_api:8071
- reverse_proxy /_matrix/federation* federation_api:8071
- reverse_proxy /_matrix/key* federation_api:8071
- reverse_proxy /_matrix/media* media_api:8071
-}
diff --git a/docs/development/CONTRIBUTING.md b/docs/development/CONTRIBUTING.md
index 2aec4c36..71e7516a 100644
--- a/docs/development/CONTRIBUTING.md
+++ b/docs/development/CONTRIBUTING.md
@@ -1,6 +1,7 @@
 ---
 title: Contributing
 parent: Development
+nav_order: 1
 permalink: /development/contributing
 ---
 
diff --git a/docs/development/PROFILING.md b/docs/development/PROFILING.md
index 57c37a90..dc4eca7b 100644
--- a/docs/development/PROFILING.md
+++ b/docs/development/PROFILING.md
@@ -1,6 +1,7 @@
 ---
 title: Profiling
 parent: Development
+nav_order: 4
 permalink: /development/profiling
 ---
 
diff --git a/docs/development/coverage.md b/docs/development/coverage.md
index c4a8a117..1b15f71a 100644
--- a/docs/development/coverage.md
+++ b/docs/development/coverage.md
@@ -1,78 +1,130 @@
 ---
 title: Coverage
 parent: Development
+nav_order: 3
 permalink: /development/coverage
 ---
 
-To generate a test coverage report for Sytest, a small patch needs to be applied to the Sytest repository to compile and use the instrumented binary:
-```patch
-diff --git a/lib/SyTest/Homeserver/Dendrite.pm b/lib/SyTest/Homeserver/Dendrite.pm
-index 8f0e209c..ad057e52 100644
---- a/lib/SyTest/Homeserver/Dendrite.pm
-+++ b/lib/SyTest/Homeserver/Dendrite.pm
-@@ -337,7 +337,7 @@ sub _start_monolith
- 
-    $output->diag( "Starting monolith server" );
-    my @command = (
--      $self->{bindir} . '/dendrite',
-+      $self->{bindir} . '/dendrite', '--test.coverprofile=' . $self->{hs_dir} . '/integrationcover.log', "DEVEL",
-       '--config', $self->{paths}{config},
-       '--http-bind-address', $self->{bind_host} . ':' . $self->unsecure_port,
-       '--https-bind-address', $self->{bind_host} . ':' . $self->secure_port,
-diff --git a/scripts/dendrite_sytest.sh b/scripts/dendrite_sytest.sh
-index f009332b..7ea79869 100755
---- a/scripts/dendrite_sytest.sh
-+++ b/scripts/dendrite_sytest.sh
-@@ -34,7 +34,8 @@ export GOBIN=/tmp/bin
- echo >&2 "--- Building dendrite from source"
- cd /src
- mkdir -p $GOBIN
--go install -v ./cmd/dendrite
-+# go install -v ./cmd/dendrite
-+go test -c -cover -covermode=atomic -o $GOBIN/dendrite -coverpkg "github.com/matrix-org/..." ./cmd/dendrite
- go install -v ./cmd/generate-keys
- cd -
- ```
+## Running unit tests with coverage enabled
+
+Running unit tests with coverage enabled can be done with the following commands, this will generate a `integrationcover.log`
+```bash
+go test -covermode=atomic -coverpkg=./... -coverprofile=integrationcover.log $(go list ./... | grep -v '/cmd/')
+go tool cover -func=integrationcover.log
+```
+
+## Running Sytest with coverage enabled
+
+To run Sytest with coverage enabled:
+
+```bash 
+docker run --rm --name sytest -v "/Users/kegan/github/sytest:/sytest" \
+  -v "/Users/kegan/github/dendrite:/src" -v "$(pwd)/sytest_logs:/logs" \
+  -v "/Users/kegan/go/:/gopath" -e "POSTGRES=1" \
+  -e "COVER=1" \
+  matrixdotorg/sytest-dendrite:latest
+  
+# to get a more accurate coverage you may also need to run Sytest using SQLite as the database:
+docker run --rm --name sytest -v "/Users/kegan/github/sytest:/sytest" \
+  -v "/Users/kegan/github/dendrite:/src" -v "$(pwd)/sytest_logs:/logs" \
+  -v "/Users/kegan/go/:/gopath" \
+  -e "COVER=1" \
+  matrixdotorg/sytest-dendrite:latest
+```
+
+This will generate a folder `covdatafiles` in each server's directory, e.g `server-0/covdatafiles`. To parse them,
+ensure your working directory is under the Dendrite repository then run:
 
- Then run Sytest. This will generate a new file `integrationcover.log` in each server's directory e.g `server-0/integrationcover.log`. To parse it,
- ensure your working directory is under the Dendrite repository then run:
  ```bash
- go tool cover -func=/path/to/server-0/integrationcover.log
+ go tool covdata func -i="$(find -name 'covmeta*' -type f -exec dirname {} \; | uniq | paste -s -d ',' -)"
  ```
  which will produce an output like:
  ```
  ...
- github.com/matrix-org/util/json.go:83:											NewJSONRequestHandler				100.0%
-github.com/matrix-org/util/json.go:90:											Protect						57.1%
-github.com/matrix-org/util/json.go:110:											RequestWithLogging				100.0%
-github.com/matrix-org/util/json.go:132:											MakeJSONAPI					70.0%
-github.com/matrix-org/util/json.go:151:											respond						61.5%
-github.com/matrix-org/util/json.go:180:											WithCORSOptions					0.0%
-github.com/matrix-org/util/json.go:191:											SetCORSHeaders					100.0%
-github.com/matrix-org/util/json.go:202:											RandomString					100.0%
-github.com/matrix-org/util/json.go:210:											init						100.0%
-github.com/matrix-org/util/unique.go:13:										Unique						91.7%
-github.com/matrix-org/util/unique.go:48:										SortAndUnique					100.0%
-github.com/matrix-org/util/unique.go:55:										UniqueStrings					100.0%
-total:															(statements)					53.7%
+github.com/matrix-org/util/json.go:132:   MakeJSONAPI         70.0%
+github.com/matrix-org/util/json.go:151:   respond             84.6%
+github.com/matrix-org/util/json.go:180:   WithCORSOptions      0.0%
+github.com/matrix-org/util/json.go:191:   SetCORSHeaders     100.0%
+github.com/matrix-org/util/json.go:202:   RandomString       100.0%
+github.com/matrix-org/util/json.go:210:   init               100.0%
+github.com/matrix-org/util/unique.go:13:  Unique              91.7%
+github.com/matrix-org/util/unique.go:48:  SortAndUnique      100.0%
+github.com/matrix-org/util/unique.go:55:  UniqueStrings      100.0%
+total                                    (statements)         64.0%
+```
+(after running Sytest for Postgres _and_ SQLite)
+
+The total coverage for this run is the last line at the bottom. However, this value is misleading because Dendrite can run in different configurations,
+which will never be tested in a single test run (e.g sqlite or postgres). To get a more accurate value, you'll need run Sytest for Postgres and SQLite (see commands above).
+Additional processing is required also to remove packages which will never be tested and extension MSCs:
+
+```bash
+# If you executed both commands from above, you can get the total coverage using the following commands  
+go tool covdata textfmt -i="$(find -name 'covmeta*' -type f -exec dirname {} \; | uniq | paste -s -d ',' -)" -o sytest.cov
+grep -Ev 'relayapi|setup/mscs' sytest.cov > final.cov
+go tool cover -func=final.cov
+
+# If you only executed the one for Postgres:
+go tool covdata textfmt -i="$(find -name 'covmeta*' -type f -exec dirname {} \; | uniq | paste -s -d ',' -)" -o sytest.cov
+grep -Ev 'relayapi|sqlite|setup/mscs' sytest.cov > final.cov
+go tool cover -func=final.cov
+
+# If you only executed the one for SQLite:
+go tool covdata textfmt -i="$(find -name 'covmeta*' -type f -exec dirname {} \; | uniq | paste -s -d ',' -)" -o sytest.cov
+grep -Ev 'relayapi|postgres|setup/mscs' sytest.cov > final.cov
+go tool cover -func=final.cov
 ```
-The total coverage for this run is the last line at the bottom. However, this value is misleading because Dendrite can run in many different configurations,
-which will never be tested in a single test run (e.g sqlite or postgres). To get a more accurate value, additional processing is required
-to remove packages which will never be tested and extension MSCs:
+
+## Getting coverage from Complement
+
+Getting the coverage for Complement runs is a bit more involved.
+
+First you'll need a docker image compatible with Complement, one can be built using
+```bash
+docker build -t complement-dendrite -f build/scripts/Complement.Dockerfile .
+```
+from within the Dendrite repository.
+
+Clone complement to a directory of your liking:
 ```bash
-# These commands are all similar but change which package paths are _removed_ from the output.
+git clone https://github.com/matrix-org/complement.git
+cd complement
+```
 
-# For Postgres
-go tool cover -func=/path/to/server-0/integrationcover.log | grep 'github.com/matrix-org/dendrite' | grep -Ev 'inthttp|sqlite|setup/mscs|api_trace' > coverage.txt
+Next we'll need a script to execute after a test finishes, create a new file `posttest.sh`, make the file executable (`chmod +x posttest.sh`) 
+and add the following content:
+```bash
+#!/bin/bash
 
-# For SQLite
-go tool cover -func=/path/to/server-0/integrationcover.log | grep 'github.com/matrix-org/dendrite' | grep -Ev 'inthttp|postgres|setup/mscs|api_trace' > coverage.txt
+mkdir -p /tmp/Complement/logs/$2/$1/
+docker cp $1:/tmp/covdatafiles/. /tmp/Complement/logs/$2/$1/
 ```
+This will copy the `covdatafiles` files from each container to something like 
+`/tmp/Complement/logs/TestLogin/94f9c428de95779d2b62a3ccd8eab9d5ddcf65cc259a40ece06bdc61687ffed3/`. (`$1` is the containerID, `$2` the test name)
 
-A total value can then be calculated using:
+Now that we have set up everything we need, we can finally execute Complement:
 ```bash
-cat coverage.txt | awk -F '\t+' '{x = x + $3} END {print x/NR}'
+COMPLEMENT_BASE_IMAGE=complement-dendrite \
+COMPLEMENT_SHARE_ENV_PREFIX=COMPLEMENT_DENDRITE_ \
+COMPLEMENT_DENDRITE_COVER=1 \
+COMPLEMENT_POST_TEST_SCRIPT=$(pwd)/posttest.sh \
+  go test -tags dendrite_blacklist ./tests/... -count=1 -v -timeout=30m -failfast=false
 ```
 
+Once this is done, you can copy the resulting `covdatafiles` files to your Dendrite repository for the next step.
+```bash
+cp -pr /tmp/Complement/logs PathToYourDendriteRepository
+```
 
-We currently do not have a way to combine Sytest/Complement/Unit Tests into a single coverage report.
\ No newline at end of file
+You can also run the following to get the coverage for Complement runs alone:
+```bash
+go tool covdata func -i="$(find /tmp/Complement -name 'covmeta*' -type f -exec dirname {} \; | uniq | paste -s -d ',' -)"
+```
+
+## Combining the results of (almost) all runs
+
+Now that we have all our `covdatafiles` files within the Dendrite repository, you can now execute the following command, to get the coverage
+overall (excluding unit tests):
+```bash
+go tool covdata func -i="$(find -name 'covmeta*' -type f -exec dirname {} \; | uniq | paste -s -d ',' -)"
+```
\ No newline at end of file
diff --git a/docs/development/sytest.md b/docs/development/sytest.md
index 4fae2ea3..2f681f3e 100644
--- a/docs/development/sytest.md
+++ b/docs/development/sytest.md
@@ -1,6 +1,7 @@
 ---
 title: SyTest
 parent: Development
+nav_order: 2
 permalink: /development/sytest
 ---
 
@@ -23,7 +24,7 @@ After running the tests, a script will print the tests you need to add to
 You should proceed after you see no build problems for dendrite after running:
 
 ```sh
-./build.sh
+go build -o bin/ ./cmd/...
 ```
 
 If you are fixing an issue marked with
@@ -61,6 +62,8 @@ When debugging, the following Docker `run` options may also be useful:
 * `-e "DENDRITE_TRACE_HTTP=1"`: Adds HTTP tracing to server logs.
 * `-e "DENDRITE_TRACE_INTERNAL=1"`: Adds roomserver internal API tracing to
   server logs.
+* `-e "COVER=1"`: Run Sytest with an instrumented binary, producing a Go coverage file per server.
+* `-e "RACE_DETECTION=1"`: Build the binaries with the `-race` flag (Note: This will significantly slow down test runs)
 
 The docker command also supports a single positional argument for the test file to
 run, so you can run a single `.pl` file rather than the whole test suite. For example:
@@ -71,68 +74,3 @@ docker run --rm --name sytest -v "/Users/kegan/github/sytest:/sytest"
 -v "/Users/kegan/go/:/gopath" -e "POSTGRES=1" -e "DENDRITE_TRACE_HTTP=1"
 matrixdotorg/sytest-dendrite:latest tests/50federation/40devicelists.pl
 ```
-
-### Manually Setting up SyTest
-
-**We advise AGAINST using manual SyTest setups.**
-
-If you don't want to use the Docker image, you can also run SyTest by hand. Make
-sure you have Perl 5 or above, and get SyTest with:
-
-(Note that this guide assumes your SyTest checkout is next to your
-`dendrite` checkout.)
-
-```sh
-git clone -b develop https://github.com/matrix-org/sytest
-cd sytest
-./install-deps.pl
-```
-
-Set up the database:
-
-```sh
-sudo -u postgres psql -c "CREATE USER dendrite PASSWORD 'itsasecret'"
-sudo -u postgres psql -c "ALTER USER dendrite CREATEDB"
-for i in dendrite0 dendrite1 sytest_template; do sudo -u postgres psql -c "CREATE DATABASE $i OWNER dendrite;"; done
-mkdir -p "server-0"
-cat > "server-0/database.yaml" << EOF
-args:
-    user: dendrite
-    password: itsasecret
-    database: dendrite0
-    host: 127.0.0.1
-    sslmode: disable
-type: pg
-EOF
-mkdir -p "server-1"
-cat > "server-1/database.yaml" << EOF
-args:
-    user: dendrite
-    password: itsasecret
-    database: dendrite1
-    host: 127.0.0.1
-    sslmode: disable
-type: pg
-EOF
-```
-
-Run the tests:
-
-```sh
-POSTGRES=1 ./run-tests.pl -I Dendrite::Monolith -d ../dendrite/bin -W ../dendrite/sytest-whitelist -O tap --all | tee results.tap
-```
-
-where `tee` lets you see the results while they're being piped to the file, and
-`POSTGRES=1` enables testing with PostgeSQL. If the `POSTGRES` environment
-variable is not set or is set to 0, SyTest will fall back to SQLite 3. For more
-flags and options, see <https://github.com/matrix-org/sytest#running>.
-
-Once the tests are complete, run the helper script to see if you need to add
-any newly passing test names to `sytest-whitelist` in the project's root
-directory:
-
-```sh
-../dendrite/show-expected-fail-tests.sh results.tap ../dendrite/sytest-whitelist ../dendrite/sytest-blacklist
-```
-
-If the script prints nothing/exits with 0, then you're good to go.
diff --git a/docs/development/tracing/opentracing.md b/docs/development/tracing/opentracing.md
deleted file mode 100644
index 8528c2ba..00000000
--- a/docs/development/tracing/opentracing.md
+++ /dev/null
@@ -1,114 +0,0 @@
----
-title: OpenTracing
-has_children: true
-parent: Development
-permalink: /development/opentracing
----
-
-# OpenTracing
-
-Dendrite extensively uses the [opentracing.io](http://opentracing.io) framework
-to trace work across the different logical components.
-
-At its most basic opentracing tracks "spans" of work; recording start and end
-times as well as any parent span that caused the piece of work.
-
-A typical example would be a new span being created on an incoming request that
-finishes when the response is sent. When the code needs to hit out to a
-different component a new span is created with the initial span as its parent.
-This would end up looking roughly like:
-
-```
-Received request                             Sent response
-       |<───────────────────────────────────────>|
-                 |<────────────────────>|
-            RPC call            RPC call returns
-```
-
-This is useful to see where the time is being spent processing a request on a
-component. However, opentracing allows tracking of spans across components. This
-makes it possible to see exactly what work goes into processing a request:
-
-```
-Component 1       |<─────────────────── HTTP ────────────────────>|
-                     |<──────────────── RPC ─────────────────>|
-Component 2                |<─ SQL ─>|     |<── RPC ───>|
-Component 3                                  |<─ SQL ─>|
-```
-
-This is achieved by serializing span information during all communication
-between components. For HTTP requests, this is achieved by the sender
-serializing the span into a HTTP header, and the receiver deserializing the span
-on receipt. (Generally a new span is then immediately created with the
-deserialized span as the parent).
-
-A collection of spans that are related is called a trace.
-
-Spans are passed through the code via contexts, rather than manually. It is
-therefore important that all spans that are created are immediately added to the
-current context. Thankfully the opentracing library gives helper functions for
-doing this:
-
-```golang
-span, ctx := opentracing.StartSpanFromContext(ctx, spanName)
-defer span.Finish()
-```
-
-This will create a new span, adding any span already in `ctx` as a parent to the
-new span.
-
-Adding Information
-------------------
-
-Opentracing allows adding information to a trace via three mechanisms:
-
-- "tags" ─ A span can be tagged with a key/value pair. This is typically
-  information that relates to the span, e.g. for spans created for incoming HTTP
-  requests could include the request path and response codes as tags, spans for
-  SQL could include the query being executed.
-- "logs" ─ Key/value pairs can be looged at a particular instance in a trace.
-  This can be useful to log e.g. any errors that happen.
-- "baggage" ─ Arbitrary key/value pairs can be added to a span to which all
-  child spans have access. Baggage isn't saved and so isn't available when
-  inspecting the traces, but can be used to add context to logs or tags in child
-  spans.
-
-See
-[specification.md](https://github.com/opentracing/specification/blob/master/specification.md)
-for some of the common tags and log fields used.
-
-Span Relationships
-------------------
-
-Spans can be related to each other. The most common relation is `childOf`, which
-indicates the child span somehow depends on the parent span ─ typically the
-parent span cannot complete until all child spans are completed.
-
-A second relation type is `followsFrom`, where the parent has no dependence on
-the child span. This usually indicates some sort of fire and forget behaviour,
-e.g. adding a message to a pipeline or inserting into a kafka topic.
-
-Jaeger
-------
-
-Opentracing is just a framework. We use
-[jaeger](https://github.com/jaegertracing/jaeger) as the actual implementation.
-
-Jaeger is responsible for recording, sending and saving traces, as well as
-giving a UI for viewing and interacting with traces.
-
-To enable jaeger a `Tracer` object must be instansiated from the config (as well
-as having a jaeger server running somewhere, usually locally). A `Tracer` does
-several things:
-
-- Decides which traces to save and send to the server. There are multiple
-  schemes for doing this, with a simple example being to save a certain fraction
-  of traces.
-- Communicating with the jaeger backend. If not explicitly specified uses the
-  default port on localhost.
-- Associates a service name to all spans created by the tracer. This service
-  name equates to a logical component, e.g. spans created by clientapi will have
-  a different service name than ones created by the syncapi. Database access
-  will also typically use a different service name.
-
-  This means that there is a tracer per service name/component.
diff --git a/docs/development/tracing/setup.md b/docs/development/tracing/setup.md
deleted file mode 100644
index cef1089e..00000000
--- a/docs/development/tracing/setup.md
+++ /dev/null
@@ -1,57 +0,0 @@
----
-title: Setup
-parent: OpenTracing
-grand_parent: Development
-permalink: /development/opentracing/setup
----
-
-# OpenTracing Setup
-
-Dendrite uses [Jaeger](https://www.jaegertracing.io/) for tracing between microservices.
-Tracing shows the nesting of logical spans which provides visibility on how the microservices interact.
-This document explains how to set up Jaeger locally on a single machine.
-
-## Set up the Jaeger backend
-
-The [easiest way](https://www.jaegertracing.io/docs/1.18/getting-started/) is to use the all-in-one Docker image:
-
-```
-$ docker run -d --name jaeger \
-  -e COLLECTOR_ZIPKIN_HTTP_PORT=9411 \
-  -p 5775:5775/udp \
-  -p 6831:6831/udp \
-  -p 6832:6832/udp \
-  -p 5778:5778 \
-  -p 16686:16686 \
-  -p 14268:14268 \
-  -p 14250:14250 \
-  -p 9411:9411 \
-  jaegertracing/all-in-one:1.18
-```
-
-## Configuring Dendrite to talk to Jaeger
-
-Modify your config to look like: (this will send every single span to Jaeger which will be slow on large instances, but for local testing it's fine)
-
-```
-tracing:
-  enabled: true
-  jaeger:
-    serviceName: "dendrite"
-    disabled: false
-    rpc_metrics: true
-    tags: []
-    sampler:
-      type: const
-      param: 1
-```
-
-then run the monolith server:
-
-```
-./dendrite --tls-cert server.crt --tls-key server.key --config dendrite.yaml
-```
-
-## Checking traces
-
-Visit <http://localhost:16686> to see traces under `DendriteMonolith`.
diff --git a/docs/hiawatha/monolith-sample.conf b/docs/hiawatha/dendrite-sample.conf
index 8285c0bd..8285c0bd 100644
--- a/docs/hiawatha/monolith-sample.conf
+++ b/docs/hiawatha/dendrite-sample.conf
diff --git a/docs/hiawatha/polylith-sample.conf b/docs/hiawatha/polylith-sample.conf
deleted file mode 100644
index eb1dd4f9..00000000
--- a/docs/hiawatha/polylith-sample.conf
+++ /dev/null
@@ -1,35 +0,0 @@
-# Depending on which port is used for federation (.well-known/matrix/server or SRV record),
-# ensure there's a binding for that port in the configuration. Replace "FEDPORT" with port
-# number, (e.g. "8448"), and "IPV4" with your server's ipv4 address (separate binding for
-# each ip address, e.g. if you use both ipv4 and ipv6 addresses).
-
-Binding {
-        Port = FEDPORT
-        Interface = IPV4
-        TLScertFile = /path/to/fullchainandprivkey.pem
-}
-
-
-VirtualHost {
-        ...
-        # route requests to:
-        # /_matrix/client/.*/sync
-        # /_matrix/client/.*/user/{userId}/filter
-        # /_matrix/client/.*/user/{userId}/filter/{filterID}
-        # /_matrix/client/.*/keys/changes
-        # /_matrix/client/.*/rooms/{roomId}/messages
-        # /_matrix/client/.*/rooms/{roomId}/context/{eventID}
-        # /_matrix/client/.*/rooms/{roomId}/event/{eventID}
-        # /_matrix/client/.*/rooms/{roomId}/relations/{eventID}
-        # /_matrix/client/.*/rooms/{roomId}/relations/{eventID}/{relType}
-        # /_matrix/client/.*/rooms/{roomId}/relations/{eventID}/{relType}/{eventType}
-        # /_matrix/client/.*/rooms/{roomId}/members
-        # /_matrix/client/.*/rooms/{roomId}/joined_members
-        # to sync_api
-        ReverseProxy = /_matrix/client/.*?/(sync|user/.*?/filter/?.*|keys/changes|rooms/.*?/(messages|.*?_?members|context/.*?|relations/.*?|event/.*?))$ http://localhost:8073 600
-        ReverseProxy = /_matrix/client http://localhost:8071 600
-        ReverseProxy = /_matrix/federation http://localhost:8072 600
-        ReverseProxy = /_matrix/key http://localhost:8072 600
-        ReverseProxy = /_matrix/media http://localhost:8074 600
-        ...
-}
diff --git a/docs/installation/1_planning.md b/docs/installation/1_planning.md
index 36d90abd..354003ae 100644
--- a/docs/installation/1_planning.md
+++ b/docs/installation/1_planning.md
@@ -7,23 +7,13 @@ permalink: /installation/planning
 
 # Planning your installation
 
-## Modes
-
-Dendrite consists of several components, each responsible for a different aspect of the Matrix protocol.
-Users can run Dendrite in one of two modes which dictate how these components are executed and communicate.
-
-* **Monolith mode** runs all components in a single process. Components communicate through an internal NATS
-  server with generally low overhead. This mode dramatically simplifies deployment complexity and offers the
-  best balance between performance and resource usage for low-to-mid volume deployments.
-
-
-## Databases
+## Database
 
 Dendrite can run with either a PostgreSQL or a SQLite backend. There are considerable tradeoffs
 to consider:
 
 * **PostgreSQL**: Needs to run separately to Dendrite, needs to be installed and configured separately
-  and and will use more resources over all, but will be **considerably faster** than SQLite. PostgreSQL
+  and will use more resources over all, but will be **considerably faster** than SQLite. PostgreSQL
   has much better write concurrency which will allow Dendrite to process more tasks in parallel. This
   will be necessary for federated deployments to perform adequately.
 
@@ -80,18 +70,17 @@ If using the PostgreSQL database engine, you should install PostgreSQL 12 or lat
 ### NATS Server
 
 Dendrite comes with a built-in [NATS Server](https://github.com/nats-io/nats-server) and
-therefore does not need this to be manually installed. If you are planning a monolith installation, you
-do not need to do anything.
+therefore does not need this to be manually installed.
 
 
 ### Reverse proxy
 
 A reverse proxy such as [Caddy](https://caddyserver.com), [NGINX](https://www.nginx.com) or
-[HAProxy](http://www.haproxy.org) is useful for deployments. Configuring those is not covered in this documentation, although sample configurations
+[HAProxy](http://www.haproxy.org) is useful for deployments. Configuring this is not covered in this documentation, although sample configurations
 for [Caddy](https://github.com/matrix-org/dendrite/blob/main/docs/caddy) and
 [NGINX](https://github.com/matrix-org/dendrite/blob/main/docs/nginx) are provided.
 
 ### Windows
 
-Finally, if you want to build Dendrite on Windows, you will need need `gcc` in the path. The best
+Finally, if you want to build Dendrite on Windows, you will need `gcc` in the path. The best
 way to achieve this is by installing and building Dendrite under [MinGW-w64](https://www.mingw-w64.org/).
diff --git a/docs/installation/2_domainname.md b/docs/installation/2_domainname.md
index 545a2daf..d86a664c 100644
--- a/docs/installation/2_domainname.md
+++ b/docs/installation/2_domainname.md
@@ -20,7 +20,7 @@ Matrix servers usually discover each other when federating using the following m
    well-known file to connect to the remote homeserver;
 2. If a DNS SRV delegation exists on `example.com`, use the IP address and port from the DNS SRV
    record to connect to the remote homeserver;
-3. If neither well-known or DNS SRV delegation are configured, attempt to connect to the remote
+3. If neither well-known nor DNS SRV delegation are configured, attempt to connect to the remote
    homeserver by connecting to `example.com` port TCP/8448 using HTTPS.
 
 The exact details of how server name resolution works can be found in
diff --git a/docs/installation/5_install_monolith.md b/docs/installation/5_install_monolith.md
deleted file mode 100644
index 901975a6..00000000
--- a/docs/installation/5_install_monolith.md
+++ /dev/null
@@ -1,21 +0,0 @@
----
-title: Installing as a monolith
-parent: Installation
-has_toc: true
-nav_order: 5
-permalink: /installation/install/monolith
----
-
-# Installing as a monolith
-
-You can install the Dendrite monolith binary into `$GOPATH/bin` by using `go install`:
-
-```sh
-go install ./cmd/dendrite
-```
-
-Alternatively, you can specify a custom path for the binary to be written to using `go build`:
-
-```sh
-go build -o /usr/local/bin/ ./cmd/dendrite
-```
diff --git a/docs/installation/9_starting_monolith.md b/docs/installation/9_starting_monolith.md
deleted file mode 100644
index d7e8c0b8..00000000
--- a/docs/installation/9_starting_monolith.md
+++ /dev/null
@@ -1,42 +0,0 @@
----
-title: Starting the monolith
-parent: Installation
-has_toc: true
-nav_order: 9
-permalink: /installation/start/monolith
----
-
-# Starting the monolith
-
-Once you have completed all of the preparation and installation steps,
-you can start your Dendrite monolith deployment by starting `dendrite`:
-
-```bash
-./dendrite -config /path/to/dendrite.yaml
-```
-
-By default, Dendrite will listen HTTP on port 8008. If you want to change the addresses
-or ports that Dendrite listens on, you can use the `-http-bind-address` and
-`-https-bind-address` command line arguments:
-
-```bash
-./dendrite -config /path/to/dendrite.yaml \
-    -http-bind-address 1.2.3.4:12345 \
-    -https-bind-address 1.2.3.4:54321
-```
-
-## Running under systemd
-
-A common deployment pattern is to run the monolith under systemd. For this, you
-will need to create a service unit file. An example service unit file is available
-in the [GitHub repository](https://github.com/matrix-org/dendrite/blob/main/docs/systemd/monolith-example.service).
-
-Once you have installed the service unit, you can notify systemd, enable and start
-the service:
-
-```bash
-systemctl daemon-reload
-systemctl enable dendrite
-systemctl start dendrite
-journalctl -fu dendrite
-```
diff --git a/docs/installation/docker.md b/docs/installation/docker.md
new file mode 100644
index 00000000..1ecc7c6e
--- /dev/null
+++ b/docs/installation/docker.md
@@ -0,0 +1,11 @@
+---
+title: Docker
+parent: Installation
+has_children: true
+nav_order: 4
+permalink: /docker
+---
+
+# Installation using Docker
+
+This section contains documentation how to install Dendrite using Docker
diff --git a/docs/installation/docker/1_docker.md b/docs/installation/docker/1_docker.md
new file mode 100644
index 00000000..1fe79263
--- /dev/null
+++ b/docs/installation/docker/1_docker.md
@@ -0,0 +1,57 @@
+---
+title: Installation
+parent: Docker
+grand_parent: Installation
+has_toc: true
+nav_order: 1
+permalink: /installation/docker/install
+---
+
+# Installing Dendrite using Docker Compose
+
+Dendrite provides an [example](https://github.com/matrix-org/dendrite/blob/main/build/docker/docker-compose.yml) 
+Docker compose file, which needs some preparation to start successfully.
+Please note that this compose file only has Postgres as a dependency, and you need to configure
+a [reverse proxy](../planning#reverse-proxy).
+
+## Preparations
+
+### Generate a private key
+
+First we'll generate private key, which is used to sign events, the following will create one in `./config`:
+
+```bash
+mkdir -p ./config
+docker run --rm --entrypoint="/usr/bin/generate-keys" \
+  -v $(pwd)/config:/mnt \
+  matrixdotorg/dendrite-monolith:latest \
+  -private-key /mnt/matrix_key.pem
+```
+(**NOTE**: This only needs to be executed **once**, as you otherwise overwrite the key)
+
+### Generate a config
+
+Similar to the command above, we can generate a config to be used, which will use the correct paths
+as specified in the example docker-compose file. Change `server` to your domain and `db` according to your changes
+to the docker-compose file (`services.postgres.environment` values):
+
+```bash
+mkdir -p ./config
+docker run --rm --entrypoint="/bin/sh" \
+  -v $(pwd)/config:/mnt \
+  matrixdotorg/dendrite-monolith:latest \
+  -c "/usr/bin/generate-config \
+    -dir /var/dendrite/ \
+    -db postgres://dendrite:itsasecret@postgres/dendrite?sslmode=disable \
+    -server YourDomainHere > /mnt/dendrite.yaml"
+```
+
+You can then change `config/dendrite.yaml` to your liking.
+
+## Starting Dendrite
+
+Once you're done changing the config, you can now start up Dendrite with
+
+```bash
+docker-compose -f docker-compose.yml up 
+```
diff --git a/docs/installation/helm.md b/docs/installation/helm.md
new file mode 100644
index 00000000..dd20e026
--- /dev/null
+++ b/docs/installation/helm.md
@@ -0,0 +1,11 @@
+---
+title: Helm
+parent: Installation
+has_children: true
+nav_order: 3
+permalink: /helm
+---
+
+# Helm
+
+This section contains documentation how to use [Helm](https://helm.sh/) to install Dendrite on a [Kubernetes](https://kubernetes.io/) cluster.
diff --git a/docs/installation/helm/1_helm.md b/docs/installation/helm/1_helm.md
new file mode 100644
index 00000000..00fe4fdc
--- /dev/null
+++ b/docs/installation/helm/1_helm.md
@@ -0,0 +1,58 @@
+---
+title: Installation
+parent: Helm
+grand_parent: Installation
+has_toc: true
+nav_order: 1
+permalink: /installation/helm/install
+---
+
+# Installing Dendrite using Helm
+
+To install Dendrite using the Helm chart, you first have to add the repository using the following commands:
+
+```bash
+helm repo add dendrite https://matrix-org.github.io/dendrite/
+helm repo update
+```
+
+Next you'll need to create a `values.yaml` file and configure it to your liking. All possible values can be found 
+[here](https://github.com/matrix-org/dendrite/blob/main/helm/dendrite/values.yaml), but at least you need to configure
+a `server_name`, otherwise the chart will complain about it:
+
+```yaml
+dendrite_config:
+  global:
+    server_name: "localhost"
+```
+
+If you are going to use an existing Postgres database, you'll also need to configure this connection:
+
+```yaml
+dendrite_config:
+  global:
+    database:
+      connection_string: "postgresql://PostgresUser:PostgresPassword@PostgresHostName/DendriteDatabaseName"
+      max_open_conns: 90
+      max_idle_conns: 5
+      conn_max_lifetime: -1
+```
+
+## Installing with PostgreSQL
+
+The chart comes with a dependency on Postgres, which can be installed alongside Dendrite, this needs to be enabled in
+the `values.yaml`:
+
+```yaml
+postgresql:
+  enabled: true # this installs Postgres
+  primary:
+    persistence:
+      size: 1Gi # defines the size for $PGDATA
+
+dendrite_config:
+  global:
+    server_name: "localhost"
+```
+
+Using this option, the `database.connection_string` will be set for you automatically.
\ No newline at end of file
diff --git a/docs/installation/manual.md b/docs/installation/manual.md
new file mode 100644
index 00000000..3ab1fd62
--- /dev/null
+++ b/docs/installation/manual.md
@@ -0,0 +1,11 @@
+---
+title: Manual
+parent: Installation
+has_children: true
+nav_order: 5
+permalink: /manual
+---
+
+# Manual Installation
+
+This section contains documentation how to manually install Dendrite
diff --git a/docs/installation/3_build.md b/docs/installation/manual/1_build.md
index 824c81d3..73a62688 100644
--- a/docs/installation/3_build.md
+++ b/docs/installation/manual/1_build.md
@@ -1,31 +1,26 @@
 ---
-title: Building Dendrite
-parent: Installation
+title: Building/Installing Dendrite
+parent: Manual
+grand_parent: Installation
 has_toc: true
-nav_order: 3
-permalink: /installation/build
+nav_order: 1
+permalink: /installation/manual/build
 ---
 
 # Build all Dendrite commands
 
 Dendrite has numerous utility commands in addition to the actual server binaries.
-Build them all from the root of the source repo with `build.sh` (Linux/Mac):
+Build them all from the root of the source repo with:
 
 ```sh
-./build.sh
-```
-
-or `build.cmd` (Windows):
-
-```powershell
-build.cmd
+go build -o bin/ ./cmd/...
 ```
 
 The resulting binaries will be placed in the `bin` subfolder.
 
-# Installing as a monolith
+# Installing Dendrite
 
-You can install the Dendrite monolith binary into `$GOPATH/bin` by using `go install`:
+You can install the Dendrite binary into `$GOPATH/bin` by using `go install`:
 
 ```sh
 go install ./cmd/dendrite
diff --git a/docs/installation/4_database.md b/docs/installation/manual/2_database.md
index d64ee661..1be602c6 100644
--- a/docs/installation/4_database.md
+++ b/docs/installation/manual/2_database.md
@@ -1,8 +1,10 @@
 ---
 title: Preparing database storage
 parent: Installation
-nav_order: 3
-permalink: /installation/database
+nav_order: 2
+parent: Manual
+grand_parent: Installation
+permalink: /installation/manual/database
 ---
 
 # Preparing database storage
@@ -13,31 +15,22 @@ may need to perform some manual steps outlined below.
 ## PostgreSQL
 
 Dendrite can automatically populate the database with the relevant tables and indexes, but
-it is not capable of creating the databases themselves. You will need to create the databases
+it is not capable of creating the database itself. You will need to create the database
 manually.
 
-The databases **must** be created with UTF-8 encoding configured or you will likely run into problems
+The database **must** be created with UTF-8 encoding configured, or you will likely run into problems
 with your Dendrite deployment.
 
-At this point, you can choose to either use a single database for all Dendrite components,
-or you can run each component with its own separate database:
+You will need to create a single PostgreSQL database. Deployments
+can use a single global connection pool, which makes updating the configuration file much easier.
+Only one database connection string to manage and likely simpler to back up the database. All
+components will be sharing the same database resources (CPU, RAM, storage).
 
-* **Single database**: You will need to create a single PostgreSQL database. Monolith deployments
-  can use a single global connection pool, which makes updating the configuration file much easier.
-  Only one database connection string to manage and likely simpler to back up the database. All
-  components will be sharing the same database resources (CPU, RAM, storage).
-
-* **Separate databases**: You will need to create a separate PostgreSQL database for each
-  component. You will need to configure each component that has storage in the Dendrite
-  configuration file with its own connection parameters. Allows running a different database engine
-  for each component on a different machine if needs be, each with their own CPU, RAM and storage —
-  almost certainly overkill unless you are running a very large Dendrite deployment.
-
-For either configuration, you will want to:
+You will most likely want to:
 
 1. Configure a role (with a username and password) which Dendrite can use to connect to the
    database;
-2. Create the database(s) themselves, ensuring that the Dendrite role has privileges over them.
+2. Create the database itself, ensuring that the Dendrite role has privileges over them.
    As Dendrite will create and manage the database tables, indexes and sequences by itself, the
    Dendrite role must have suitable privileges over the database.
 
@@ -71,27 +64,6 @@ Create the database itself, using the `dendrite` role from above:
 sudo -u postgres createdb -O dendrite -E UTF-8 dendrite
 ```
 
-### Multiple database creation
-
-The following eight components require a database. In this example they will be named:
-
-| Appservice API | `dendrite_appservice`    |
-| Federation API | `dendrite_federationapi` |
-| Media API      | `dendrite_mediaapi`      |
-| MSCs           | `dendrite_mscs`          |
-| Roomserver     | `dendrite_roomserver`    |
-| Sync API       | `dendrite_syncapi`       |
-| Key server     | `dendrite_keyserver`     |
-| User API       | `dendrite_userapi`       |
-
-... therefore you will need to create eight different databases:
-
-```bash
-for i in appservice federationapi mediaapi mscs roomserver syncapi keyserver userapi; do
-    sudo -u postgres createdb -O dendrite -E UTF-8 dendrite_$i
-done
-```
-
 ## SQLite
 
 **WARNING:** The Dendrite SQLite backend is slower, less reliable and not recommended for
diff --git a/docs/installation/7_configuration.md b/docs/installation/manual/3_configuration.md
index 0cc67b15..a9dd81c8 100644
--- a/docs/installation/7_configuration.md
+++ b/docs/installation/manual/3_configuration.md
@@ -1,8 +1,9 @@
 ---
 title: Configuring Dendrite
-parent: Installation
-nav_order: 7
-permalink: /installation/configuration
+parent: Manual
+grand_parent: Installation
+nav_order: 3
+permalink: /installation/manual/configuration
 ---
 
 # Configuring Dendrite
@@ -20,7 +21,7 @@ sections:
 
 First of all, you will need to configure the server name of your Matrix homeserver.
 This must match the domain name that you have selected whilst [configuring the domain
-name delegation](domainname).
+name delegation](domainname#delegation).
 
 In the `global` section, set the `server_name` to your delegated domain name:
 
@@ -44,7 +45,7 @@ global:
 
 ## JetStream configuration
 
-Monolith deployments can use the built-in NATS Server rather than running a standalone
+Dendrite deployments can use the built-in NATS Server rather than running a standalone
 server. If you want to use a standalone NATS Server anyway, you can also configure that too.
 
 ### Built-in NATS Server
@@ -56,7 +57,6 @@ configured and set a `storage_path` to a persistent folder on the filesystem:
 global:
   # ...
   jetstream:
-    in_memory: false
     storage_path: /path/to/storage/folder
     topic_prefix: Dendrite
 ```
@@ -79,22 +79,17 @@ You do not need to configure the `storage_path` when using a standalone NATS Ser
 In the case that you are connecting to a multi-node NATS cluster, you can configure more than
 one address in the `addresses` field.
 
-## Database connections
+## Database connection using a global connection pool
 
-Configuring database connections varies based on the [database configuration](database)
-that you chose.
-
-### Global connection pool
-
-If you want to use a single connection pool to a single PostgreSQL database, then you must
-uncomment and configure the `database` section within the `global` section:
+If you want to use a single connection pool to a single PostgreSQL database, 
+then you must uncomment and configure the `database` section within the `global` section:
 
 ```yaml
 global:
   # ...
   database:
     connection_string: postgres://user:pass@hostname/database?sslmode=disable
-    max_open_conns: 100
+    max_open_conns: 90
     max_idle_conns: 5
     conn_max_lifetime: -1
 ```
@@ -104,42 +99,13 @@ configuration file, e.g. under the `app_service_api`, `federation_api`, `key_ser
 `media_api`, `mscs`, `relay_api`, `room_server`, `sync_api` and `user_api` blocks, otherwise
 these will override the `global` database configuration.
 
-### Per-component connections (all other configurations)
-
-If you are are using SQLite databases or separate PostgreSQL
-databases per component, then you must instead configure the `database` sections under each
-of the component blocks ,e.g. under the `app_service_api`, `federation_api`, `key_server`,
-`media_api`, `mscs`, `relay_api`, `room_server`, `sync_api` and `user_api` blocks.
-
-For example, with PostgreSQL:
-
-```yaml
-room_server:
-  # ...
-  database:
-    connection_string: postgres://user:pass@hostname/dendrite_component?sslmode=disable
-    max_open_conns: 10
-    max_idle_conns: 2
-    conn_max_lifetime: -1
-```
-
-... or with SQLite:
-
-```yaml
-room_server:
-  # ...
-  database:
-    connection_string: file:roomserver.db
-    max_open_conns: 10
-    max_idle_conns: 2
-    conn_max_lifetime: -1
-```
-
 ## Full-text search
 
-Dendrite supports experimental full-text indexing using [Bleve](https://github.com/blevesearch/bleve). It is configured in the `sync_api` section as follows.
+Dendrite supports full-text indexing using [Bleve](https://github.com/blevesearch/bleve). It is configured in the `sync_api` section as follows.
 
-Depending on the language most likely to be used on the server, it might make sense to change the `language` used when indexing, to ensure the returned results match the expectations. A full list of possible languages can be found [here](https://github.com/blevesearch/bleve/tree/master/analysis/lang).
+Depending on the language most likely to be used on the server, it might make sense to change the `language` used when indexing, 
+to ensure the returned results match the expectations. A full list of possible languages 
+can be found [here](https://github.com/matrix-org/dendrite/blob/5b73592f5a4dddf64184fcbe33f4c1835c656480/internal/fulltext/bleve.go#L25-L46).
 
 ```yaml
 sync_api:
diff --git a/docs/installation/8_signingkey.md b/docs/installation/manual/4_signingkey.md
index 323759a8..bd9c242a 100644
--- a/docs/installation/8_signingkey.md
+++ b/docs/installation/manual/4_signingkey.md
@@ -1,8 +1,9 @@
 ---
 title: Generating signing keys
-parent: Installation
-nav_order: 8
-permalink: /installation/signingkeys
+parent: Manual
+grand_parent: Installation
+nav_order: 4
+permalink: /installation/manual/signingkeys
 ---
 
 # Generating signing keys
@@ -11,7 +12,7 @@ All Matrix homeservers require a signing private key, which will be used to auth
 federation requests and events.
 
 The `generate-keys` utility can be used to generate a private key. Assuming that Dendrite was
-built using `build.sh`, you should find the `generate-keys` utility in the `bin` folder.
+built using `go build -o bin/ ./cmd/...`, you should find the `generate-keys` utility in the `bin` folder.
 
 To generate a Matrix signing private key:
 
diff --git a/docs/installation/manual/5_starting_dendrite.md b/docs/installation/manual/5_starting_dendrite.md
new file mode 100644
index 00000000..d1350437
--- /dev/null
+++ b/docs/installation/manual/5_starting_dendrite.md
@@ -0,0 +1,26 @@
+---
+title: Starting Dendrite
+parent: Manual
+grand_parent: Installation
+nav_order: 5
+permalink: /installation/manual/start
+---
+
+# Starting Dendrite
+
+Once you have completed all preparation and installation steps,
+you can start your Dendrite deployment by executing the `dendrite` binary:
+
+```bash
+./dendrite -config /path/to/dendrite.yaml
+```
+
+By default, Dendrite will listen HTTP on port 8008. If you want to change the addresses
+or ports that Dendrite listens on, you can use the `-http-bind-address` and
+`-https-bind-address` command line arguments:
+
+```bash
+./dendrite -config /path/to/dendrite.yaml \
+    -http-bind-address 1.2.3.4:12345 \
+    -https-bind-address 1.2.3.4:54321
+```
diff --git a/docs/nginx/monolith-sample.conf b/docs/nginx/dendrite-sample.conf
index 360eb925..360eb925 100644
--- a/docs/nginx/monolith-sample.conf
+++ b/docs/nginx/dendrite-sample.conf
diff --git a/docs/nginx/polylith-sample.conf b/docs/nginx/polylith-sample.conf
deleted file mode 100644
index 0ad24509..00000000
--- a/docs/nginx/polylith-sample.conf
+++ /dev/null
@@ -1,58 +0,0 @@
-server {
-    listen 443 ssl; # IPv4
-    listen [::]:443 ssl; # IPv6
-    server_name my.hostname.com;
-
-    ssl_certificate /path/to/fullchain.pem;
-    ssl_certificate_key /path/to/privkey.pem;
-    ssl_dhparam /path/to/ssl-dhparams.pem;
-
-    proxy_set_header Host      $host;
-    proxy_set_header X-Real-IP $remote_addr;
-    proxy_read_timeout         600;
-
-    location /.well-known/matrix/server {
-        return 200 '{ "m.server": "my.hostname.com:443" }';
-    }
-
-    location /.well-known/matrix/client {
-        # If your sever_name here doesn't match your matrix homeserver URL
-        # (e.g. hostname.com as server_name and matrix.hostname.com as homeserver URL)
-        # add_header Access-Control-Allow-Origin '*';
-        return 200 '{ "m.homeserver": { "base_url": "https://my.hostname.com" } }';
-    }
-
-    # route requests to:
-    # /_matrix/client/.*/sync
-    # /_matrix/client/.*/user/{userId}/filter
-    # /_matrix/client/.*/user/{userId}/filter/{filterID}
-    # /_matrix/client/.*/keys/changes
-    # /_matrix/client/.*/rooms/{roomId}/messages
-    # /_matrix/client/.*/rooms/{roomId}/context/{eventID}
-    # /_matrix/client/.*/rooms/{roomId}/event/{eventID}
-    # /_matrix/client/.*/rooms/{roomId}/relations/{eventID}
-    # /_matrix/client/.*/rooms/{roomId}/relations/{eventID}/{relType}
-    # /_matrix/client/.*/rooms/{roomId}/relations/{eventID}/{relType}/{eventType}
-    # /_matrix/client/.*/rooms/{roomId}/members
-    # /_matrix/client/.*/rooms/{roomId}/joined_members
-    # to sync_api
-    location ~ /_matrix/client/.*?/(sync|user/.*?/filter/?.*|keys/changes|rooms/.*?/(messages|.*?_?members|context/.*?|relations/.*?|event/.*?))$  {
-        proxy_pass http://sync_api:8073;
-    }
-
-    location /_matrix/client {
-        proxy_pass http://client_api:8071;
-    }
-
-    location /_matrix/federation {
-        proxy_pass http://federation_api:8072;
-    }
-
-    location /_matrix/key {
-        proxy_pass http://federation_api:8072;
-    }
-
-    location /_matrix/media {
-        proxy_pass http://media_api:8074;
-    }
-}
diff --git a/docs/systemd/monolith-example.service b/docs/systemd/monolith-example.service
deleted file mode 100644
index 8a948a3f..00000000
--- a/docs/systemd/monolith-example.service
+++ /dev/null
@@ -1,19 +0,0 @@
-[Unit]
-Description=Dendrite (Matrix Homeserver)
-After=syslog.target
-After=network.target
-After=postgresql.service
-
-[Service]
-Environment=GODEBUG=madvdontneed=1
-RestartSec=2s
-Type=simple
-User=dendrite
-Group=dendrite
-WorkingDirectory=/opt/dendrite/
-ExecStart=/opt/dendrite/bin/dendrite
-Restart=always
-LimitNOFILE=65535
-
-[Install]
-WantedBy=multi-user.target