| Age | Commit message (Collapse) | Author |
|---|
|
|
|
|
|
With package validation rules, transactions that fail individually may
sometimes be eligible for reconsideration if submitted as part of a
(different) package. For now, that includes trasactions that failed for
being too low feerate. Add a new TxValidationResult type to distinguish
these failures from others. In the next commits, we will abort package
validation if a tx fails for any other reason. In the future, we will
also decide whether to cache failures in recent_rejects based on this
result (we won't want to reject a package containing a transaction that
was rejected previously for being low feerate).
Package validation also sometimes elects to skip some transactions when
it knows the package will not be submitted in order to quit sooner. Add
a result to specify this situation; we also don't want to cache these
as rejections.
|
|
Introduced in 9b7ec393b82ca9d7ada77d06e0835df0386a8b85. This copied the format of the other Get.*Weight helpers but it's useless for a CTxOut.
|
|
Instead of using the dummysigner to compute a placeholder satisfaction,
infer a descriptor on the scriptPubKey of the coin being spent and use
the estimation of the satisfaction size given by the descriptor
directly.
Note this (almost, see next paragraph) exactly conserves the previous
behaviour. For instance CalculateMaximumSignedInputSize was previously
assuming the input to be spent in a transaction that spends at least one
Segwit coin, since it was always accounting for the serialization of the
number of witness elements.
In this commit we use a placeholder for the size of the serialization of
the witness stack size (1 byte). Since the logic in this commit is
already tricky enough to review, and that it is only a very tiny
approximation not observable through the existing tests, it is addressed
in the next commit.
|
|
This change gets rid of a few casts and makes the following commit diff
smaller.
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./
-END VERIFY SCRIPT-
Commits of previous years:
- 2021: f47dda2c58b5d8d623e0e7ff4e74bc352dfa83d7
- 2020: fa0074e2d82928016a43ca408717154a1c70a4db
- 2019: aaaaad6ac95b402fe18d019d67897ced6b316ee0
|
|
In order to prevent memory DoS, we must ensure that we don't accept a new
header into memory until we've performed anti-DoS checks, such as verifying
that the header is part of a sufficiently high work chain. This commit adds a
new argument to AcceptBlockHeader() so that we can ensure that all call-sites
which might cause a new header to be accepted into memory have to grapple with
the question of whether the header is safe to accept, or needs further
validation.
This patch also fixes two places where low-difficulty-headers could have been
processed without such validation (processing an unrequested block from the
network, and processing a compact block).
Credit to Niklas Gögge for noticing this issue, and thanks to Sjors Provoost
for test code.
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./
-END VERIFY SCRIPT-
Commits of previous years:
* 2020: fa0074e2d82928016a43ca408717154a1c70a4db
* 2019: aaaaad6ac95b402fe18d019d67897ced6b316ee0
|
|
This just calls through to AcceptToMemoryPool() internally, and is currently unused.
Also add a new transaction validation failure reason TX_NO_MEMPOOL to
indicate that there is no mempool.
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./
-END VERIFY SCRIPT-
|
|
|
|
Our policy checks for non-standard inputs depend only on the non-witness
portion of a transaction: we look up the scriptPubKey of the input being
spent from our UTXO set (which is covered by the input txid), and the p2sh
checks only rely on the scriptSig portion of the input.
Consequently it's safe to add txids of transactions that fail these checks to
the reject filter, as the witness is irrelevant to the failure. This is helpful
for any situation where we might request the transaction again via txid (either
from txid-relay peers, or if we might fetch the transaction via txid due to
parent-fetching of orphans).
Further, in preparation for future witness versions being deployed on the
network, ensure that WITNESS_UNKNOWN transactions are rejected in
AreInputsStandard(), so that transactions spending v1 (or greater) witness
outputs will fall into this category of having their txid added to the reject
filter.
|
|
0a4f1422cd1c20e12a05d7ff1a2ef1d5e7c654bb Further improve comments around recentRejects (Suhas Daftuar)
0e20cfedb704c1f76bb727e2009867d3d503a03d Disconnect peers sending wtxidrelay message after VERACK (Suhas Daftuar)
cacd85209e20fc0fd08f86eed23b6ef93484ffcf test: Use wtxid relay generally in functional tests (Fabian Jahr)
8d8099e97ab8af2126f6fbd223fbd82c52f2e85e test: Add tests for wtxid tx relay in segwit test (Fabian Jahr)
9a5392fdf67f1c5c90f52d3cdb3dea4f35d1609f test: Update test framework p2p protocol version to 70016 (Fabian Jahr)
dd78d1d641178b473ab1156b71a837b9e686792b Rename AddInventoryKnown() to AddKnownTx() (Suhas Daftuar)
4eb515574e1012bc8ea5dafc3042dcdf4c766f26 Make TX_WITNESS_STRIPPED its own rejection reason (Suhas Daftuar)
97141ca442daea8fc9c307cf81a02b38dcc28fd8 Delay getdata requests from peers using txid-based relay (Suhas Daftuar)
46d78d47dea345329ba094310eec56ab00a02ddc Add p2p message "wtxidrelay" (Suhas Daftuar)
2d282e0cba9761574b6b43d134ca95f3052d7fd2 ignore non-wtxidrelay compliant invs (Anthony Towns)
ac88e2eb619821ad7ae1d45d4b40be69051d3999 Add support for tx-relay via wtxid (Suhas Daftuar)
8e68fc246d09f1e6c6dfa8c676969d97c2eb4334 Add wtxids to recentRejects instead of txids (Suhas Daftuar)
144c38582042c3b9ec53bb97ba0644fc0114f8fb Add wtxids of confirmed transactions to bloom filter (Suhas Daftuar)
85c78d54af462996a0bca6cf97f91e1aa8778ae8 Add wtxid-index to orphan map (Suhas Daftuar)
08b39955ec7f84e835ab0b1366f0dd28dfd6ce03 Add a wtxid-index to mapRelay (Suhas Daftuar)
60f0acda713e7b9dc188aef54ef93981a93f4e44 Just pass a hash to AddInventoryKnown (Suhas Daftuar)
c7eb6b4f1fe5bd76388a023529977674534334a7 Add wtxid to mempool unbroadcast tracking (Amiti Uttarwar)
2b4b90aa8f0440deacefb5997d7bd1f9f5c591b3 Add a wtxid-index to the mempool (Suhas Daftuar)
Pull request description:
Using txids (a transaction's hash, without witness) for transaction relay is problematic, post-segwit -- if a peer gives us a segwit transaction that fails policy checks, it could be because the txid associated with the transaction is definitely unacceptable to our node (regardless of the witness), or it could be that the transaction was malleated and with a different witness, the txid could be accepted to our mempool.
We have a bloom filter of recently rejected transactions, whose purpose is to help us avoid redownloading and revalidating transactions that fail to be accepted, but because of this potential for witness malleability to interfere with relay of valid transactions, we do not use the filter for segwit transactions. This issue is discussed at some length in #8279. The effect of this is that whenever a segwit transaction that fails policy checks is relayed, a node would download that transaction from every peer announcing it, because it has no way presently to cache failure. Historically this hasn't been a big problem, but if/when policy for accepting segwit transactions were to change (eg taproot, or any other change), we could expect older nodes talking to newer nodes to be wasting bandwidth because of this.
As discussed in that issue, switching to wtxid-based relay solves this problem -- by using an identifier for a transaction that commits to all the data in our relay protocol, we can be certain if a transaction that a peer is announcing is one that we've already tried to process, or if it's something new. This PR introduces support for wtxid-based relay with peers that support it (and remains backwards compatible with peers that use txids for relay, of course).
Apart from code correctness, one issue to be aware of is that by downloading from old and new peers alike, we should expect there to be some bandwidth wasted, because sometimes we might download the same transaction via txid-relay as well as wtxid-relay. The last commit in this PR implements a heuristic I want to analyze, which is to just delay relay from txid-relay peers by 2 seconds, if we have at least 1 wtxid-based peer. I've just started running a couple nodes with this heuristic so I can measure how well it works, but I'm open to other ideas for minimizing that issue. In the long run, I think this will be essentially a non-issue, so I don't think it's too big a concern, we just need to bite the bullet and deal with it during upgrade.
Finally, this proposal would need a simple BIP describing the changes, which I haven't yet drafted. However, review and testing of this code in the interim would be welcome.
To do items:
- [x] Write BIP explaining the spec here (1 new p2p message for negotiating wtxid-based relay, along with a new INV type)
- [ ] Measure and evaluate a heuristic for minimizing how often a node downloads the same transaction twice, when connected to old and new nodes.
ACKs for top commit:
naumenkogs:
utACK 0a4f1422cd1c20e12a05d7ff1a2ef1d5e7c654bb
laanwj:
utACK 0a4f1422cd1c20e12a05d7ff1a2ef1d5e7c654bb
Tree-SHA512: d8eb8f0688cf0cbe9507bf738e143edab1f595551fdfeddc2b6734686ea26e7f156b6bfde38bad8bbbe8bec1857c7223e1687f8f018de7463dde8ecaa8f450df
|
|
Previously, TX_WITNESS_MUTATED could be returned during transaction validation
for either transactions that had a witness that was non-standard, or for
transactions that had no witness but were invalid due to segwit validation
rules.
However, for txid/wtxid-relay considerations, net_processing distinguishes the
witness stripped case separately, because it affects whether a wtxid should be
able to be added to the reject filter. It is safe to add the wtxid of a
witness-mutated transaction to the filter (as that wtxid shouldn't collide with
the txid, and hence it wouldn't interfere with transaction relay from
txid-relay peers), but it is not safe to add the wtxid (== txid) of a
witness-stripped transaction to the filter, because that would interfere with
relay of another transaction with the same txid (but different wtxid) when
relaying from txid-relay peers.
Also updates the comment explaining this logic, and explaining that we can get
rid of this complexity once there's a sufficient deployment of wtxid-relaying
peers on the network.
|
|
|
|
This removes boilerplate code in the subclasses which otherwise only
differ by the result type.
|
|
|
|
|
|
-BEGIN VERIFY SCRIPT-
./contrib/devtools/copyright_header.py update ./
-END VERIFY SCRIPT-
|
|
|
|
Handle this failure in the same way as all other failures: call Invalid()
with the reasons for the failure.
|
|
ValidationState::Invalid() takes a parameter `ret` which is returned to
the caller. All call sites set this to false. Remove the `ret` parameter
and just return false always.
|
|
Minor style fixups and comment updates.
This is purely a style change. There is no change in behavior.
|
|
Split CValidationState into TxValidationState and BlockValidationState
to store validation results for transactions and blocks respectively.
|
|
We no longer send BIP 61 REJECT messages, so there's no need to set
a REJECT code in the CValidationState object.
|
|
|
|
|
|
Co-authored-by: Anthony Towns <aj@erisian.com.au>
|
|
Co-authored-by: Anthony Towns <aj@erisian.com.au>
|
|
Co-authored-by: Anthony Towns <aj@erisian.com.au>
|
|
This is a first step towards cleaning up our DoS interface - make
validation return *why* something is invalid, and let net_processing
figure out what that implies in terms of banning/disconnection/etc.
Behavior change: peers will now be banned for providing blocks
with premature coinbase spends.
Co-authored-by: Anthony Towns <aj@erisian.com.au>
Suhas Daftuar <sdaftuar@gmail.com>
|
|
Co-authored-by: Anthony Towns <aj@erisian.com.au>
|
|
Isolate the decision of whether to ban a peer to one place in the
code, rather than having it sprinkled throughout net_processing.
Co-authored-by: Anthony Towns <aj@erisian.com.au>
Suhas Daftuar <sdaftuar@gmail.com>
John Newbery <john@johnnewbery.com>
|
|
|
|
|
|
|
|
|
|
|
|
-BEGIN VERIFY SCRIPT-
for f in \
src/*.cpp \
src/*.h \
src/bench/*.cpp \
src/bench/*.h \
src/compat/*.cpp \
src/compat/*.h \
src/consensus/*.cpp \
src/consensus/*.h \
src/crypto/*.cpp \
src/crypto/*.h \
src/crypto/ctaes/*.h \
src/policy/*.cpp \
src/policy/*.h \
src/primitives/*.cpp \
src/primitives/*.h \
src/qt/*.cpp \
src/qt/*.h \
src/qt/test/*.cpp \
src/qt/test/*.h \
src/rpc/*.cpp \
src/rpc/*.h \
src/script/*.cpp \
src/script/*.h \
src/support/*.cpp \
src/support/*.h \
src/support/allocators/*.h \
src/test/*.cpp \
src/test/*.h \
src/wallet/*.cpp \
src/wallet/*.h \
src/wallet/test/*.cpp \
src/wallet/test/*.h \
src/zmq/*.cpp \
src/zmq/*.h
do
base=${f%/*}/ relbase=${base#src/} sed -i "s:#include \"\(.*\)\"\(.*\):if test -e \$base'\\1'; then echo \"#include <\"\$relbase\"\\1>\\2\"; else echo \"#include <\\1>\\2\"; fi:e" $f
done
-END VERIFY SCRIPT-
|
|
- Move comment about transaction/block weight calculation so it applies not only to the GetBlockWeight function but also to GetTransactionWeight
- Fix comment in validation.cpp referencing future deployment of BIP113. It has already been deployed.
- The doc comment for BLOCK_DOWNLOAD_WINDOW wasn't updated since pruning was introduced, so it still refers to pruning as something that might happen in the future. A larger BLOCK_DOWNLOAD_WINDOW window would now, indeed, make pruning harder.
|
|
Some people keep thinking that MAX_BLOCK_BASE_SIZE is a separate
size limit from the weight limit when it fact it is superfluous,
and used in early tests before the witness data has been
validated or just to compute worst case sizes. The size checks
that use it would not behave any differently consensus wise
if they were eliminated completely.
Its correct value is not independently settable but is a function
of the weight limit and weight formula.
This patch just eliminates it and uses the scale factor as
required to compute the worse case constants.
It also moves the weight factor out of primitives into consensus,
which is a more logical place for it.
|
|
|
|
Edited via:
$ contrib/devtools/copyright_header.py update .
|
|
|
|
Includes a fix by Suhas Daftuar and LongShao007
|
|
|
|
Add a field `strDebugMessage` which can be passed to DoS or Invalid,
and queried using GetDebugMessage() to add extra troubleshooting
information to the validation state.
|
|
|
|
|
