diff options
Diffstat (limited to 'share')
| -rw-r--r-- | share/examples/bitcoin.conf | 192 |
1 files changed, 1 insertions, 191 deletions
diff --git a/share/examples/bitcoin.conf b/share/examples/bitcoin.conf index c5b79709c7..5bee4bf92e 100644 --- a/share/examples/bitcoin.conf +++ b/share/examples/bitcoin.conf @@ -1,191 +1 @@ -## -## bitcoin.conf configuration file. Lines beginning with # are comments. -## - -# Network-related settings: - -# Note that if you use testnet, signet or regtest, particularly with the options -# addnode, connect, port, bind, rpcport, rpcbind or wallet, you will also -# want to read "[Sections]" further down. - -# Run on the testnet network -#testnet=0 - -# Run on a signet network -#signet=0 - -# Run a regression test network -#regtest=0 - -# Connect via a SOCKS5 proxy -#proxy=127.0.0.1:9050 - -# Bind to given address and always listen on it. Use [host]:port notation for IPv6 -#bind=<addr> - -# Bind to given address and add permission flags to peers connecting to it. Use [host]:port notation for IPv6 -#whitebind=perm@<addr> - -############################################################## -## Quick Primer on addnode vs connect ## -## Let's say for instance you use addnode=4.2.2.4 ## -## addnode will connect you to and tell you about the ## -## nodes connected to 4.2.2.4. In addition it will tell ## -## the other nodes connected to it that you exist so ## -## they can connect to you. ## -## connect will not do the above when you 'connect' to it. ## -## It will *only* connect you to 4.2.2.4 and no one else.## -## ## -## So if you're behind a firewall, or have other problems ## -## finding nodes, add some using 'addnode'. ## -## ## -## If you want to stay private, use 'connect' to only ## -## connect to "trusted" nodes. ## -## ## -## If you run multiple nodes on a LAN, there's no need for ## -## all of them to open lots of connections. Instead ## -## 'connect' them all to one node that is port forwarded ## -## and has lots of connections. ## -## Thanks goes to [Noodle] on Freenode. ## -############################################################## - -# Use as many addnode= settings as you like to connect to specific peers -#addnode=69.164.218.197 -#addnode=10.0.0.2:8333 - -# Alternatively use as many connect= settings as you like to connect ONLY to specific peers -#connect=69.164.218.197 -#connect=10.0.0.1:8333 - -# Listening mode, enabled by default except when 'connect' is being used -#listen=1 - -# Port on which to listen for connections (default: 8333, testnet: 18333, signet: 38333, regtest: 18444) -#port= - -# Maximum number of inbound + outbound connections (default: 125). This option -# applies only if inbound connections are enabled; otherwise, the number of connections -# will not be more than 11: 8 full-relay connections, 2 block-relay-only ones, and -# occasionally 1 short-lived feeler or extra outbound block-relay-only connection. -# These limits do not apply to connections added manually with the -addnode -# configuration option or the addnode RPC, which have a separate limit of 8 connections. -#maxconnections= - -# Maximum upload bandwidth target in MiB per day (e.g. 'maxuploadtarget=1024' is 1 GiB per day). -# This limits the upload bandwidth for those with bandwidth limits. 0 = no limit (default: 0). -# -maxuploadtarget does not apply to peers with 'download' permission. -# For more information on reducing bandwidth utilization, see: doc/reduce-traffic.md. -#maxuploadtarget= - -# -# JSON-RPC options (for controlling a running Bitcoin/bitcoind process) -# - -# server=1 tells Bitcoin-Qt and bitcoind to accept JSON-RPC commands -#server=0 - -# Bind to given address to listen for JSON-RPC connections. -# Refer to the manpage or bitcoind -help for further details. -#rpcbind=<addr> - -# If no rpcpassword is set, rpc cookie auth is sought. The default `-rpccookiefile` name -# is .cookie and found in the `-datadir` being used for bitcoind. This option is typically used -# when the server and client are run as the same user. -# -# If not, you must set rpcuser and rpcpassword to secure the JSON-RPC API. -# -# The config option `rpcauth` can be added to server startup argument. It is set at initialization time -# using the output from the script in share/rpcauth/rpcauth.py after providing a username: -# -# ./share/rpcauth/rpcauth.py alice -# String to be appended to bitcoin.conf: -# rpcauth=alice:f7efda5c189b999524f151318c0c86$d5b51b3beffbc02b724e5d095828e0bc8b2456e9ac8757ae3211a5d9b16a22ae -# Your password: -# DONT_USE_THIS_YOU_WILL_GET_ROBBED_8ak1gI25KFTvjovL3gAM967mies3E= -# -# On client-side, you add the normal user/password pair to send commands: -#rpcuser=alice -#rpcpassword=DONT_USE_THIS_YOU_WILL_GET_ROBBED_8ak1gI25KFTvjovL3gAM967mies3E= -# -# You can even add multiple entries of these to the server conf file, and client can use any of them: -# rpcauth=bob:b2dd077cb54591a2f3139e69a897ac$4e71f08d48b4347cf8eff3815c0e25ae2e9a4340474079f55705f40574f4ec99 - -# How many seconds bitcoin will wait for a complete RPC HTTP request. -# after the HTTP connection is established. -#rpcclienttimeout=30 - -# By default, only RPC connections from localhost are allowed. -# Specify as many rpcallowip= settings as you like to allow connections from other hosts, -# either as a single IPv4/IPv6 or with a subnet specification. - -# NOTE: opening up the RPC port to hosts outside your local trusted network is NOT RECOMMENDED, -# because the rpcpassword is transmitted over the network unencrypted. - -# server=1 tells Bitcoin-Qt to accept JSON-RPC commands. -# it is also read by bitcoind to determine if RPC should be enabled -#rpcallowip=10.1.1.34/255.255.255.0 -#rpcallowip=1.2.3.4/24 -#rpcallowip=2001:db8:85a3:0:0:8a2e:370:7334/96 - -# Listen for RPC connections on this TCP port: -#rpcport=8332 - -# You can use Bitcoin or bitcoind to send commands to Bitcoin/bitcoind -# running on another host using this option: -#rpcconnect=127.0.0.1 - -# Wallet options - -# Specify where to find wallet, lockfile and logs. If not present, those files will be -# created as new. -#wallet=</path/to/dir> - -# Create transactions that have enough fees so they are likely to begin confirmation within n blocks (default: 6). -# This setting is over-ridden by the -paytxfee option. -#txconfirmtarget=n - -# Pay a transaction fee every time you send bitcoins. -#paytxfee=0.000x - -# Miscellaneous options - -# Pre-generate this many public/private key pairs, so wallet backups will be valid for -# both prior transactions and several dozen future transactions. -#keypool=100 - -# Maintain coinstats index used by the gettxoutsetinfo RPC (default: 0). -#coinstatsindex=1 - -# Enable pruning to reduce storage requirements by deleting old blocks. -# This mode is incompatible with -txindex and -coinstatsindex. -# 0 = default (no pruning). -# 1 = allows manual pruning via RPC. -# >=550 = target to stay under in MiB. -#prune=550 - -# User interface options - -# Start Bitcoin minimized -#min=1 - -# Minimize to the system tray -#minimizetotray=1 - -# [Sections] -# Most options apply to mainnet, testnet, signet and regtest. -# If you want to confine an option to just one network, you should add it in the -# relevant section below. -# EXCEPTIONS: The options addnode, connect, port, bind, rpcport, rpcbind and wallet -# only apply to mainnet unless they appear in the appropriate section below. - -# Options only for mainnet -[main] - -# Options only for testnet -[test] - -# Options only for signet -[signet] - -# Options only for regtest -[regtest] +# This is a placeholder file. Please follow the instructions in `contrib/devtools/README.md` to generate a bitcoin.conf file. |