Merge #13780: 0.17: Pre-branch maintenance

3fc20632a3ad30809356a58d2cf0ea4a4ad4cec3 qt: Set BLOCK_CHAIN_SIZE = 220 (DrahtBot)
2b6a2f4a28792f2fe9dc1be843b1ff1ecae35e8a Regenerate manpages (DrahtBot)
eb7daf4d600eeb631427c018a984a77a34aca66e Update copyright headers to 2018 (DrahtBot)

Pull request description:

  Some trivial maintenance to avoid having to do it again after the 0.17 branch off.

  (The scripts to do this are in `./contrib/`)

Tree-SHA512: 16b2af45e0351b1c691c5311d48025dc6828079e98c2aa2e600dc5910ee8aa01858ca6c356538150dc46fe14c8819ed8ec8e4ec9a0f682b9950dd41bc50518fa

1 files changed, 142 insertions, 106 deletions

diff --git a/doc/man/bitcoin-qt.1 b/doc/man/bitcoin-qt.1
index a8c55fb0b3..3a18c9f49f 100644
--- a/doc/man/bitcoin-qt.1
+++ b/doc/man/bitcoin-qt.1
@@ -1,5 +1,5 @@
-.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.3.
-.TH BITCOIN-QT "1" "January 2018" "bitcoin-qt v0.16.99.0" "User Commands"
+.\" DO NOT MODIFY THIS FILE!  It was generated by help2man 1.47.6.
+.TH BITCOIN-QT "1" "July 2018" "bitcoin-qt v0.16.99.0" "User Commands"
 .SH NAME
 bitcoin-qt \- manual page for bitcoin-qt v0.16.99.0
 .SH DESCRIPTION
@@ -13,20 +13,11 @@ bitcoin\-qt [command\-line options]
 .IP
 Print this help message and exit
 .HP
-\fB\-version\fR
-.IP
-Print version and exit
-.HP
 \fB\-alertnotify=\fR<cmd>
 .IP
 Execute command when a relevant alert is received or we see a really
 long fork (%s in cmd is replaced by message)
 .HP
-\fB\-blocknotify=\fR<cmd>
-.IP
-Execute command when the best block changes (%s in cmd is replaced by
-block hash)
-.HP
 \fB\-assumevalid=\fR<hex>
 .IP
 If this block is in the chain assume that it and its ancestors are valid
@@ -36,9 +27,28 @@ default:
 testnet:
 0000000002e9e7b00e1f6dc5123a04aad68dd0f0968d8c7aa45f6640795c37b1)
 .HP
+\fB\-blocknotify=\fR<cmd>
+.IP
+Execute command when the best block changes (%s in cmd is replaced by
+block hash)
+.HP
+\fB\-blockreconstructionextratxn=\fR<n>
+.IP
+Extra transactions to keep in memory for compact block reconstructions
+(default: 100)
+.HP
+\fB\-blocksdir=\fR<dir>
+.IP
+Specify blocks directory (default: <datadir>/blocks)
+.HP
 \fB\-conf=\fR<file>
 .IP
-Specify configuration file (default: bitcoin.conf)
+Specify configuration file. Relative paths will be prefixed by datadir
+location. (default: bitcoin.conf)
+.HP
+\fB\-daemon\fR
+.IP
+Run in the background as a daemon and accept commands
 .HP
 \fB\-datadir=\fR<dir>
 .IP
@@ -48,45 +58,46 @@ Specify data directory
 .IP
 Set database cache size in megabytes (4 to 16384, default: 450)
 .HP
-\fB\-loadblock=\fR<file>
+\fB\-debuglogfile=\fR<file>
 .IP
-Imports blocks from external blk000??.dat file on startup
+Specify location of debug log file. Relative paths will be prefixed by a
+net\-specific datadir location. (0 to disable; default: debug.log)
 .HP
-\fB\-debuglogfile=\fR<file>
+\fB\-includeconf=\fR<file>
 .IP
-Specify location of debug log file: this can be an absolute path or a
-path relative to the data directory (default: debug.log)
+Specify additional configuration file, relative to the \fB\-datadir\fR path
+(only useable from configuration file, not command line)
 .HP
-\fB\-maxorphantx=\fR<n>
+\fB\-loadblock=\fR<file>
 .IP
-Keep at most <n> unconnectable transactions in memory (default: 100)
+Imports blocks from external blk000??.dat file on startup
 .HP
 \fB\-maxmempool=\fR<n>
 .IP
 Keep the transaction memory pool below <n> megabytes (default: 300)
 .HP
+\fB\-maxorphantx=\fR<n>
+.IP
+Keep at most <n> unconnectable transactions in memory (default: 100)
+.HP
 \fB\-mempoolexpiry=\fR<n>
 .IP
 Do not keep transactions in the mempool longer than <n> hours (default:
 336)
 .HP
-\fB\-persistmempool\fR
-.IP
-Whether to save the mempool on shutdown and load on restart (default: 1)
-.HP
-\fB\-blockreconstructionextratxn=\fR<n>
-.IP
-Extra transactions to keep in memory for compact block reconstructions
-(default: 100)
-.HP
 \fB\-par=\fR<n>
 .IP
-Set the number of script verification threads (\fB\-6\fR to 16, 0 = auto, <0 =
+Set the number of script verification threads (\fB\-8\fR to 16, 0 = auto, <0 =
 leave that many cores free, default: 0)
 .HP
+\fB\-persistmempool\fR
+.IP
+Whether to save the mempool on shutdown and load on restart (default: 1)
+.HP
 \fB\-pid=\fR<file>
 .IP
-Specify pid file (default: bitcoind.pid)
+Specify pid file. Relative paths will be prefixed by a net\-specific
+datadir location. (default: bitcoind.pid)
 .HP
 \fB\-prune=\fR<n>
 .IP
@@ -100,14 +111,14 @@ setting requires re\-downloading the entire blockchain. (default:
 >550 = automatically prune block files to stay under the
 specified target size in MiB)
 .HP
-\fB\-reindex\-chainstate\fR
-.IP
-Rebuild chain state from the currently indexed blocks
-.HP
 \fB\-reindex\fR
 .IP
 Rebuild chain state and block index from the blk*.dat files on disk
 .HP
+\fB\-reindex\-chainstate\fR
+.IP
+Rebuild chain state from the currently indexed blocks
+.HP
 \fB\-sysperms\fR
 .IP
 Create new files with system default permissions, instead of umask 077
@@ -117,13 +128,18 @@ Create new files with system default permissions, instead of umask 077
 .IP
 Maintain a full transaction index, used by the getrawtransaction rpc
 call (default: 0)
+.HP
+\fB\-version\fR
+.IP
+Print version and exit
 .PP
 Connection options:
 .HP
 \fB\-addnode=\fR<ip>
 .IP
 Add a node to connect to and attempt to keep the connection open (see
-the `addnode` RPC command help for more info)
+the `addnode` RPC command help for more info). This option can be
+specified multiple times to add multiple nodes.
 .HP
 \fB\-banscore=\fR<n>
 .IP
@@ -141,9 +157,10 @@ for IPv6
 .HP
 \fB\-connect=\fR<ip>
 .IP
-Connect only to the specified node(s); \fB\-connect\fR=\fI\,0\/\fR disables automatic
+Connect only to the specified node; \fB\-connect\fR=\fI\,0\/\fR disables automatic
 connections (the rules for this peer are the same as for
-\fB\-addnode\fR)
+\fB\-addnode\fR). This option can be specified multiple times to connect
+to multiple nodes.
 .HP
 \fB\-discover\fR
 .IP
@@ -159,6 +176,10 @@ Allow DNS lookups for \fB\-addnode\fR, \fB\-seednode\fR and \fB\-connect\fR (def
 Query for peer addresses via DNS lookup, if low on addresses (default: 1
 unless \fB\-connect\fR used)
 .HP
+\fB\-enablebip61\fR
+.IP
+Send reject messages per BIP61 (default: 1)
+.HP
 \fB\-externalip=\fR<ip>
 .IP
 Specify your own public address
@@ -193,6 +214,11 @@ Maximum allowed median peer time offset adjustment. Local perspective of
 time may be influenced by peers forward or backward by this
 amount. (default: 4200 seconds)
 .HP
+\fB\-maxuploadtarget=\fR<n>
+.IP
+Tries to keep outbound traffic under the given target (in MiB per 24h),
+0 = no limit (default: 0)
+.HP
 \fB\-onion=\fR<ip:port>
 .IP
 Use separate SOCKS5 proxy to reach peers via Tor hidden services
@@ -200,17 +226,20 @@ Use separate SOCKS5 proxy to reach peers via Tor hidden services
 .HP
 \fB\-onlynet=\fR<net>
 .IP
-Only connect to nodes in network <net> (ipv4, ipv6 or onion)
-.HP
-\fB\-permitbaremultisig\fR
-.IP
-Relay non\-P2SH multisig (default: 1)
+Make outgoing connections only through network <net> (ipv4, ipv6 or
+onion). Incoming connections are not affected by this option.
+This option can be specified multiple times to allow multiple
+networks.
 .HP
 \fB\-peerbloomfilters\fR
 .IP
 Support filtering of blocks and transaction with bloom filters (default:
 1)
 .HP
+\fB\-permitbaremultisig\fR
+.IP
+Relay non\-P2SH multisig (default: 1)
+.HP
 \fB\-port=\fR<port>
 .IP
 Listen for connections on <port> (default: 8333 or testnet: 18333)
@@ -226,7 +255,9 @@ stream isolation (default: 1)
 .HP
 \fB\-seednode=\fR<ip>
 .IP
-Connect to a node to retrieve peer addresses, and disconnect
+Connect to a node to retrieve peer addresses, and disconnect. This
+option can be specified multiple times to connect to multiple
+nodes.
 .HP
 \fB\-timeout=\fR<n>
 .IP
@@ -257,11 +288,6 @@ CIDR notated network (e.g. 1.2.3.0/24). Can be specified multiple
 times. Whitelisted peers cannot be DoS banned and their
 transactions are always relayed, even if they are already in the
 mempool, useful e.g. for a gateway
-.HP
-\fB\-maxuploadtarget=\fR<n>
-.IP
-Tries to keep outbound traffic under the given target (in MiB per 24h),
-0 = no limit (default: 0)
 .PP
 Wallet options:
 .HP
@@ -270,6 +296,14 @@ Wallet options:
 What type of addresses to use ("legacy", "p2sh\-segwit", or "bech32",
 default: "p2sh\-segwit")
 .HP
+\fB\-avoidpartialspends\fR
+.IP
+Group outputs by address, selecting all or none, instead of selecting on
+a per\-output basis. Privacy is improved as an address is only
+used once (unless someone sends to it after spending from it),
+but may result in slightly higher fees as suboptimal coin
+selection may result due to the added limitation (default: 0)
+.HP
 \fB\-changetype\fR
 .IP
 What type of change to use ("legacy", "p2sh\-segwit", or "bech32").
@@ -281,22 +315,22 @@ sending to a native segwit address)
 .IP
 Do not load the wallet and disable wallet RPC calls
 .HP
-\fB\-keypool=\fR<n>
+\fB\-discardfee=\fR<amt>
 .IP
-Set key pool size to <n> (default: 1000)
+The fee rate (in BTC/kB) that indicates your tolerance for discarding
+change by adding it to the fee (default: 0.0001). Note: An output
+is discarded if it is dust at this rate, but we will always
+discard up to the dust relay fee and a discard fee above that is
+limited by the fee estimate for the longest target
 .HP
 \fB\-fallbackfee=\fR<amt>
 .IP
 A fee rate (in BTC/kB) that will be used when fee estimation has
 insufficient data (default: 0.0002)
 .HP
-\fB\-discardfee=\fR<amt>
+\fB\-keypool=\fR<n>
 .IP
-The fee rate (in BTC/kB) that indicates your tolerance for discarding
-change by adding it to the fee (default: 0.0001). Note: An output
-is discarded if it is dust at this rate, but we will always
-discard up to the dust relay fee and a discard fee above that is
-limited by the fee estimate for the longest target
+Set key pool size to <n> (default: 1000)
 .HP
 \fB\-mintxfee=\fR<amt>
 .IP
@@ -324,17 +358,18 @@ Spend unconfirmed change when sending transactions (default: 1)
 If paytxfee is not set, include enough fee so transactions begin
 confirmation on average within n blocks (default: 6)
 .HP
-\fB\-walletrbf\fR
-.IP
-Send transactions with full\-RBF opt\-in enabled (RPC only, default: 0)
-.HP
 \fB\-upgradewallet\fR
 .IP
 Upgrade wallet to latest format on startup
 .HP
-\fB\-wallet=\fR<file>
+\fB\-wallet=\fR<path>
 .IP
-Specify wallet file (within data directory) (default: wallet.dat)
+Specify wallet database path. Can be specified multiple times to load
+multiple wallets. Path is interpreted relative to <walletdir> if
+it is not absolute, and will be created if it does not exist (as
+a directory containing a wallet.dat file and log files). For
+backwards compatibility this will also accept names of existing
+data files in <walletdir>.)
 .HP
 \fB\-walletbroadcast\fR
 .IP
@@ -350,6 +385,10 @@ exists, otherwise <datadir>)
 Execute command when a wallet transaction changes (%s in cmd is replaced
 by TxID)
 .HP
+\fB\-walletrbf\fR
+.IP
+Send transactions with full\-RBF opt\-in enabled (RPC only, default: 0)
+.HP
 \fB\-zapwallettxes=\fR<mode>
 .IP
 Delete all wallet transactions and only recover those parts of the
@@ -377,10 +416,6 @@ Enable publish raw transaction in <address>
 .PP
 Debugging/Testing options:
 .HP
-\fB\-uacomment=\fR<cmt>
-.IP
-Append comment to the user agent string
-.HP
 \fB\-debug=\fR<category>
 .IP
 Output debugging information (default: 0, supplying <category> is
@@ -416,11 +451,16 @@ transaction; setting this too low may abort large transactions
 .HP
 \fB\-printtoconsole\fR
 .IP
-Send trace/debug info to console instead of debug.log file
+Send trace/debug info to console (default: 1 when no \fB\-daemon\fR. To disable
+logging to file, set debuglogfile=0)
 .HP
 \fB\-shrinkdebugfile\fR
 .IP
 Shrink debug.log file on client startup (default: 1 when no \fB\-debug\fR)
+.HP
+\fB\-uacomment=\fR<cmt>
+.IP
+Append comment to the user agent string
 .PP
 Chain selection options:
 .HP
@@ -453,15 +493,15 @@ Enable transaction replacement in the memory pool (default: 1)
 Fees (in BTC/kB) smaller than this are considered zero fee for relaying,
 mining and transaction creation (default: 0.00001)
 .HP
-\fB\-whitelistrelay\fR
-.IP
-Accept relayed transactions received from whitelisted peers even when
-not relaying transactions (default: 1)
-.HP
 \fB\-whitelistforcerelay\fR
 .IP
 Force relay of transactions from whitelisted peers even if they violate
 local relay policy (default: 1)
+.HP
+\fB\-whitelistrelay\fR
+.IP
+Accept relayed transactions received from whitelisted peers even when
+not relaying transactions (default: 1)
 .PP
 Block creation options:
 .HP
@@ -469,11 +509,6 @@ Block creation options:
 .IP
 Set maximum BIP141 block weight (default: 3996000)
 .HP
-\fB\-blockmaxsize=\fR<n>
-.IP
-Set maximum BIP141 block weight to this * 4. Deprecated, use
-blockmaxweight
-.HP
 \fB\-blockmintxfee=\fR<amt>
 .IP
 Set lowest fee rate (in BTC/kB) for transactions to be included in block
@@ -481,14 +516,26 @@ creation. (default: 0.00001)
 .PP
 RPC server options:
 .HP
-\fB\-server\fR
-.IP
-Accept command line and JSON\-RPC commands
-.HP
 \fB\-rest\fR
 .IP
 Accept public REST requests (default: 0)
 .HP
+\fB\-rpcallowip=\fR<ip>
+.IP
+Allow JSON\-RPC connections from specified source. Valid for <ip> are a
+single IP (e.g. 1.2.3.4), a network/netmask (e.g.
+1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
+option can be specified multiple times
+.HP
+\fB\-rpcauth=\fR<userpw>
+.IP
+Username and hashed password for JSON\-RPC connections. The field
+<userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
+canonical python script is included in share/rpcauth. The client
+then connects normally using the
+rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
+option can be specified multiple times
+.HP
 \fB\-rpcbind=\fR<addr>[:port]
 .IP
 Bind to given address to listen for JSON\-RPC connections. This option is
@@ -500,37 +547,18 @@ option can be specified multiple times (default: 127.0.0.1 and
 .HP
 \fB\-rpccookiefile=\fR<loc>
 .IP
-Location of the auth cookie (default: data dir)
-.HP
-\fB\-rpcuser=\fR<user>
-.IP
-Username for JSON\-RPC connections
+Location of the auth cookie. Relative paths will be prefixed by a
+net\-specific datadir location. (default: data dir)
 .HP
 \fB\-rpcpassword=\fR<pw>
 .IP
 Password for JSON\-RPC connections
 .HP
-\fB\-rpcauth=\fR<userpw>
-.IP
-Username and hashed password for JSON\-RPC connections. The field
-<userpw> comes in the format: <USERNAME>:<SALT>$<HASH>. A
-canonical python script is included in share/rpcuser. The client
-then connects normally using the
-rpcuser=<USERNAME>/rpcpassword=<PASSWORD> pair of arguments. This
-option can be specified multiple times
-.HP
 \fB\-rpcport=\fR<port>
 .IP
 Listen for JSON\-RPC connections on <port> (default: 8332 or testnet:
 18332)
 .HP
-\fB\-rpcallowip=\fR<ip>
-.IP
-Allow JSON\-RPC connections from specified source. Valid for <ip> are a
-single IP (e.g. 1.2.3.4), a network/netmask (e.g.
-1.2.3.4/255.255.255.0) or a network/CIDR (e.g. 1.2.3.4/24). This
-option can be specified multiple times
-.HP
 \fB\-rpcserialversion\fR
 .IP
 Sets the serialization of raw transaction or block hex returned in
@@ -539,6 +567,14 @@ non\-verbose mode, non\-segwit(0) or segwit(1) (default: 1)
 \fB\-rpcthreads=\fR<n>
 .IP
 Set the number of threads to service RPC calls (default: 4)
+.HP
+\fB\-rpcuser=\fR<user>
+.IP
+Username for JSON\-RPC connections
+.HP
+\fB\-server\fR
+.IP
+Accept command line and JSON\-RPC commands
 .PP
 UI Options:
 .HP
@@ -554,6 +590,10 @@ Set language, for example "de_DE" (default: system locale)
 .IP
 Start minimized
 .HP
+\fB\-resetguisettings\fR
+.IP
+Reset all settings changed in the GUI
+.HP
 \fB\-rootcertificates=\fR<file>
 .IP
 Set SSL root certificates for payment request (default: \fB\-system\-\fR)
@@ -561,10 +601,6 @@ Set SSL root certificates for payment request (default: \fB\-system\-\fR)
 \fB\-splash\fR
 .IP
 Show splash screen on startup (default: 1)
-.HP
-\fB\-resetguisettings\fR
-.IP
-Reset all settings changed in the GUI
 .SH COPYRIGHT
 Copyright (C) 2009-2018 The Bitcoin Core developers