[tools/depends] Python 3.8.5

patches updated for target platforms
native python updated to 3.8.5 to accomodate change in pgen
references to python3.7 updated to python3.8
updated pythonmodules builds to build against 3.8
Use official APIs for accessing interpreter list (PyInterpreterState_ThreadHead, PyThreadState_Next)

1 files changed, 22 insertions, 31 deletions

diff --git a/tools/depends/target/python3/modules.setup b/tools/depends/target/python3/modules.setup
index 673f634087..b2068535b3 100644
--- a/tools/depends/target/python3/modules.setup
+++ b/tools/depends/target/python3/modules.setup
@@ -1,14 +1,11 @@
 # -*- makefile -*-
 # The file Setup is used by the makesetup script to construct the files
 # Makefile and config.c, from Makefile.pre and config.c.in,
-# respectively.  The file Setup itself is initially copied from
-# Setup.dist; once it exists it will not be overwritten, so you can edit
-# Setup to your heart's content.  Note that Makefile.pre is created
-# from Makefile.pre.in by the toplevel configure script.
+# respectively.  Note that Makefile.pre is created from Makefile.pre.in
+# by the toplevel configure script.
 
 # (VPATH notes: Setup and Makefile.pre are in the build directory, as
-# are Makefile and config.c; the *.in and *.dist files are in the source
-# directory.)
+# are Makefile and config.c; the *.in files are in the source directory.)
 
 # Each line in this file describes one or more optional modules.
 # Modules configured here will not be compiled by the setup.py script,
@@ -64,15 +61,11 @@
 # toplevel "make install" target.)  (For compatibility,
 # *noconfig* has the same effect as *shared*.)
 #
-# In addition, *static* explicitly declares the following modules to
-# be static.  Lines containing "*static*" and "*shared*" may thus
-# alternate throughout this file.
-
 # NOTE: As a standard policy, as many modules as can be supported by a
 # platform should be present.  The distribution comes with all modules
 # enabled that are supported by most platforms and don't require you
 # to ftp sources from elsewhere.
-*static*
+
 
 # Some special rules to define PYTHONPATH.
 # Edit the definitions below to indicate which options you are using.
@@ -108,38 +101,37 @@ PYTHONPATH=$(COREPYTHONPATH)
 # This only contains the minimal set of modules required to run the
 # setup.py script in the root of the Python source tree.
 
-posix -DPy_BUILD_CORE posixmodule.c	# posix (UNIX) system calls
+posix -DPy_BUILD_CORE_BUILTIN -I$(srcdir)/Include/internal posixmodule.c # posix (UNIX) system calls
 errno errnomodule.c			# posix (UNIX) errno values
 pwd pwdmodule.c				# this is needed to find out the user's home dir
 					# if $HOME is not set
 _sre _sre.c				# Fredrik Lundh's new regular expressions
 _codecs _codecsmodule.c			# access to the builtin codecs and codec registry
 _weakref _weakref.c			# weak references
-_functools -DPy_BUILD_CORE _functoolsmodule.c   # Tools for working with functions and callable objects
+_functools -DPy_BUILD_CORE_BUILTIN -I$(srcdir)/Include/internal _functoolsmodule.c   # Tools for working with functions and callable objects
 _operator _operator.c	        	# operator.add() and similar goodies
 _collections _collectionsmodule.c	# Container types
 _abc _abc.c				# Abstract base classes
 itertools itertoolsmodule.c		# Functions creating iterators for efficient looping
 atexit atexitmodule.c			# Register functions to be run at interpreter-shutdown
-_signal -DPy_BUILD_CORE signalmodule.c
+_signal -DPy_BUILD_CORE_BUILTIN -I$(srcdir)/Include/internal signalmodule.c
 _stat _stat.c				# stat.h interface
-time -DPy_BUILD_CORE timemodule.c	# -lm # time operations and variables
-_thread -DPy_BUILD_CORE _threadmodule.c	# low-level threading interface
+time -DPy_BUILD_CORE_BUILTIN -I$(srcdir)/Include/internal timemodule.c	# -lm # time operations and variables
+_thread -DPy_BUILD_CORE_BUILTIN -I$(srcdir)/Include/internal _threadmodule.c	# low-level threading interface
 
 # access to ISO C locale support
-_locale _localemodule.c   -lintl
+_locale -DPy_BUILD_CORE_BUILTIN _localemodule.c  # -lintl
 
 # Standard I/O baseline
-_io -DPy_BUILD_CORE -I$(srcdir)/Modules/_io _io/_iomodule.c _io/iobase.c _io/fileio.c _io/bytesio.c _io/bufferedio.c _io/textio.c _io/stringio.c
-
-# The zipimport module is always imported at startup. Having it as a
-# builtin module avoids some bootstrapping problems and reduces overhead.
-zipimport -DPy_BUILD_CORE zipimport.c
+_io -DPy_BUILD_CORE_BUILTIN -I$(srcdir)/Include/internal -I$(srcdir)/Modules/_io _io/_iomodule.c _io/iobase.c _io/fileio.c _io/bytesio.c _io/bufferedio.c _io/textio.c _io/stringio.c
 
 # faulthandler module
 faulthandler faulthandler.c
 
 # debug tool to trace memory blocks allocated by Python
+#
+# bpo-35053: The module must be builtin since _Py_NewReference()
+# can call _PyTraceMalloc_NewReference().
 _tracemalloc _tracemalloc.c hashtable.c
 
 # The rest of the modules listed in this file are all commented out by
@@ -180,7 +172,8 @@ math mathmodule.c _math.c # -lm # math library functions, e.g. sin()
 _contextvars _contextvarsmodule.c  # Context Variables
 _struct _struct.c	# binary structure packing/unpacking
 _weakref _weakref.c	# basic weak reference support
-_testcapi _testcapimodule.c    # Python C API test module
+#_testcapi _testcapimodule.c    # Python C API test module
+#_testinternalcapi _testinternalcapi.c -I$(srcdir)/Include/internal -DPy_BUILD_CORE_MODULE  # Python internal C API test module
 _random _randommodule.c	# Random number generator
 _elementtree -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI _elementtree.c	# elementtree accelerator
 _pickle _pickle.c	# pickle accelerator
@@ -188,6 +181,8 @@ _datetime _datetimemodule.c	# datetime accelerator
 _bisect _bisectmodule.c	# Bisection algorithms
 _heapq _heapqmodule.c	# Heap queue algorithm
 _asyncio _asynciomodule.c  # Fast asyncio Future
+_json -I$(srcdir)/Include/internal -DPy_BUILD_CORE_BUILTIN _json.c	# _json speedups
+_statistics _statisticsmodule.c # statistics accelerator
 
 unicodedata unicodedata.c    # static Unicode character database
 
@@ -212,14 +207,10 @@ _socket socketmodule.c
 
 # Socket module helper for SSL support; you must comment out the other
 # socket line above, and possibly edit the SSL variable:
-SSLDEFINES='-DUSE_SSL'
+SSL=$(prefix)
 _ssl _ssl.c \
-	$(SSLDEFINES) -I$(prefix)/include -I$(prefix)/include/openssl \
-	-L$(prefix)/lib -lssl -lcrypto
-
-_hashlib _hashopenssl.c \
-        $(SSLDEFINES) -I$(prefix)/include -I$(prefix)/include/openssl \
-        -L$(prefix)/lib -lssl -lcrypto
+	-DUSE_SSL -I$(SSL)/include -I$(SSL)/include/openssl \
+	-L$(SSL)/lib -lssl -lcrypto
 
 # The crypt module is now disabled by default because it breaks builds
 # on many systems (where -lcrypt is needed), e.g. Linux (I believe).
@@ -350,7 +341,7 @@ zlib zlibmodule.c -I$(prefix)/include -L$(exec_prefix)/lib -lz
 # Interface to the Expat XML parser
 # More information on Expat can be found at www.libexpat.org.
 #
-pyexpat pyexpat.c -I$(prefix)/include -L$(prefix)/lib -lexpat -DHAVE_EXPAT_CONFIG_H -DUSE_PYEXPAT_CAPI
+pyexpat expat/xmlparse.c expat/xmlrole.c expat/xmltok.c pyexpat.c -I$(srcdir)/Modules/expat -DHAVE_EXPAT_CONFIG_H -DXML_POOR_ENTROPY -DUSE_PYEXPAT_CAPI
 
 # Hye-Shik Chang's CJKCodecs