diff options
Diffstat (limited to 'src')
| -rw-r--r-- | src/include/taler_exchange_service.h | 44 | ||||
| -rw-r--r-- | src/include/taler_testing_lib.h | 28 | ||||
| -rw-r--r-- | src/lib/exchange_api_refund.c | 58 | ||||
| -rw-r--r-- | src/testing/testing_api_cmd_bank_admin_add_incoming.c | 106 |
4 files changed, 7 insertions, 229 deletions
diff --git a/src/include/taler_exchange_service.h b/src/include/taler_exchange_service.h index 6c5889ff8..9c342a33b 100644 --- a/src/include/taler_exchange_service.h +++ b/src/include/taler_exchange_service.h @@ -962,50 +962,6 @@ TALER_EXCHANGE_refund (struct TALER_EXCHANGE_Handle *exchange, /** - * Submit a refund request to the exchange and get the exchange's - * response. This API is used by a merchant. Note that - * while we return the response verbatim to the caller for further - * processing, we do already verify that the response is well-formed - * (i.e. that signatures included in the response are all valid). If - * the exchange's reply is not well-formed, we return an HTTP status code - * of zero to @a cb. - * - * The @a exchange must be ready to operate (i.e. have - * finished processing the /keys reply). If this check fails, we do - * NOT initiate the transaction with the exchange and instead return NULL. - * - * FIXME: We can probably DEPRECATE this API and only use #TALER_EXCHANGE_refund()! - * - * @param exchange the exchange handle; the exchange must be ready to operate - * @param amount the amount to be refunded; must be larger than the refund fee - * (as that fee is still being subtracted), and smaller than the amount - * (with deposit fee) of the original deposit contribution of this coin - * @param h_contract_terms hash of the contact of the merchant with the customer that is being refunded - * @param coin_pub coin’s public key of the coin from the original deposit operation - * @param rtransaction_id transaction id for the transaction between merchant and customer (of refunding operation); - * this is needed as we may first do a partial refund and later a full refund. If both - * refunds are also over the same amount, we need the @a rtransaction_id to make the disjoint - * refund requests different (as requests are idempotent and otherwise the 2nd refund might not work). - * @param merchant_pub public key of the merchant - * @param merchant_sig signature affirming the refund from the merchant - * @param cb the callback to call when a reply for this request is available - * @param cb_cls closure for the above callback - * @return a handle for this request; NULL if the inputs are invalid (i.e. - * signatures fail to verify). In this case, the callback is not called. - */ -struct TALER_EXCHANGE_RefundHandle * -TALER_EXCHANGE_refund2 (struct TALER_EXCHANGE_Handle *exchange, - const struct TALER_Amount *amount, - const struct GNUNET_HashCode *h_contract_terms, - const struct TALER_CoinSpendPublicKeyP *coin_pub, - uint64_t rtransaction_id, - const struct TALER_MerchantPublicKeyP *merchant_pub, - const struct TALER_MerchantSignatureP *merchant_sig, - TALER_EXCHANGE_RefundCallback cb, - void *cb_cls); - - -/** * Cancel a refund permission request. This function cannot be used * on a request handle if a response is already served for it. If * this function is called, the refund may or may not have happened. diff --git a/src/include/taler_testing_lib.h b/src/include/taler_testing_lib.h index b9a11865a..f13823fe6 100644 --- a/src/include/taler_testing_lib.h +++ b/src/include/taler_testing_lib.h @@ -1127,34 +1127,6 @@ TALER_TESTING_cmd_admin_add_incoming_with_ref ( /** - * Create "fakebank transfer" CMD, letting the caller specifying - * the merchant instance. This version is useful when a tip - * reserve should be topped up, in fact the interpreter will need - * the "tipping instance" in order to get the instance public key - * and make a wire transfer subject out of it. - * - * @param label command label. - * @param amount amount to transfer. - * @param payto_debit_account which account sends money. - * @param auth authentication data - * @param instance the instance that runs the tipping. Under this - * instance, the configuration file will provide the private - * key of the tipping reserve. This data will then used to - * construct the wire transfer subject line. - * @param config_filename configuration file to use. - * @return the command. - */ -struct TALER_TESTING_Command -TALER_TESTING_cmd_admin_add_incoming_with_instance ( - const char *label, - const char *amount, - const struct TALER_BANK_AuthenticationData *auth, - const char *payto_debit_account, - const char *instance, - const char *config_filename); - - -/** * Modify a fakebank transfer command to enable retries when the * reserve is not yet full or we get other transient errors from * the fakebank. diff --git a/src/lib/exchange_api_refund.c b/src/lib/exchange_api_refund.c index f675b07ac..537be7b84 100644 --- a/src/lib/exchange_api_refund.c +++ b/src/lib/exchange_api_refund.c @@ -295,59 +295,7 @@ TALER_EXCHANGE_refund (struct TALER_EXCHANGE_Handle *exchange, GNUNET_CRYPTO_eddsa_sign (&merchant_priv->eddsa_priv, &rr, &merchant_sig.eddsa_sig); - return TALER_EXCHANGE_refund2 (exchange, - amount, - h_contract_terms, - coin_pub, - rtransaction_id, - &rr.merchant, - &merchant_sig, - cb, - cb_cls); -} - -/** - * Submit a refund request to the exchange and get the exchange's - * response. This API is used by a merchant. Note that - * while we return the response verbatim to the caller for further - * processing, we do already verify that the response is well-formed - * (i.e. that signatures included in the response are all valid). If - * the exchange's reply is not well-formed, we return an HTTP status code - * of zero to @a cb. - * - * The @a exchange must be ready to operate (i.e. have - * finished processing the /keys reply). If this check fails, we do - * NOT initiate the transaction with the exchange and instead return NULL. - * - * @param exchange the exchange handle; the exchange must be ready to operate - * @param amount the amount to be refunded; must be larger than the refund fee - * (as that fee is still being subtracted), and smaller than the amount - * (with deposit fee) of the original deposit contribution of this coin - * @param h_contract_terms hash of the contact of the merchant with the customer that is being refunded - * @param coin_pub coin’s public key of the coin from the original deposit operation - * @param rtransaction_id transaction id for the transaction between merchant and customer (of refunding operation); - * this is needed as we may first do a partial refund and later a full refund. If both - * refunds are also over the same amount, we need the @a rtransaction_id to make the disjoint - * refund requests different (as requests are idempotent and otherwise the 2nd refund might not work). - * @param merchant_pub public key of the merchant - * @param merchant_sig signature affirming the refund from the merchant - * @param cb the callback to call when a reply for this request is available - * @param cb_cls closure for the above callback - * @return a handle for this request; NULL if the inputs are invalid (i.e. - * signatures fail to verify). In this case, the callback is not called. - */ -struct TALER_EXCHANGE_RefundHandle * -TALER_EXCHANGE_refund2 (struct TALER_EXCHANGE_Handle *exchange, - const struct TALER_Amount *amount, - const struct GNUNET_HashCode *h_contract_terms, - const struct TALER_CoinSpendPublicKeyP *coin_pub, - uint64_t rtransaction_id, - const struct TALER_MerchantPublicKeyP *merchant_pub, - const struct TALER_MerchantSignatureP *merchant_sig, - TALER_EXCHANGE_RefundCallback cb, - void *cb_cls) -{ struct TALER_EXCHANGE_RefundHandle *rh; struct GNUNET_CURL_Context *ctx; json_t *refund_obj; @@ -378,9 +326,9 @@ TALER_EXCHANGE_refund2 (struct TALER_EXCHANGE_Handle *exchange, h_contract_terms), "rtransaction_id", (json_int_t) rtransaction_id, "merchant_pub", GNUNET_JSON_from_data_auto ( - merchant_pub), + &rr.merchant), "merchant_sig", GNUNET_JSON_from_data_auto ( - merchant_sig) + &merchant_sig) ); if (NULL == refund_obj) { @@ -398,7 +346,7 @@ TALER_EXCHANGE_refund2 (struct TALER_EXCHANGE_Handle *exchange, rh->depconf.purpose.purpose = htonl (TALER_SIGNATURE_EXCHANGE_CONFIRM_REFUND); rh->depconf.h_contract_terms = *h_contract_terms; rh->depconf.coin_pub = *coin_pub; - rh->depconf.merchant = *merchant_pub; + rh->depconf.merchant = rr.merchant; rh->depconf.rtransaction_id = GNUNET_htonll (rtransaction_id); TALER_amount_hton (&rh->depconf.refund_amount, amount); diff --git a/src/testing/testing_api_cmd_bank_admin_add_incoming.c b/src/testing/testing_api_cmd_bank_admin_add_incoming.c index d8b1d7b02..5df691b39 100644 --- a/src/testing/testing_api_cmd_bank_admin_add_incoming.c +++ b/src/testing/testing_api_cmd_bank_admin_add_incoming.c @@ -319,67 +319,10 @@ admin_add_incoming_run (void *cls, } else { - if (NULL != fts->instance) - { - char *section; - char *keys; - struct GNUNET_CONFIGURATION_Handle *cfg; - - GNUNET_assert (NULL != fts->config_filename); - cfg = GNUNET_CONFIGURATION_create (); - if (GNUNET_OK != - GNUNET_CONFIGURATION_load (cfg, - fts->config_filename)) - { - GNUNET_break (0); - TALER_TESTING_interpreter_fail (is); - return; - } - - GNUNET_asprintf (§ion, - "instance-%s", - fts->instance); - if (GNUNET_OK != - GNUNET_CONFIGURATION_get_value_filename - (cfg, - section, - "TIP_RESERVE_PRIV_FILENAME", - &keys)) - { - GNUNET_log (GNUNET_ERROR_TYPE_ERROR, - "Configuration fails to specify reserve" - " private key filename in section %s\n", - section); - GNUNET_free (section); - TALER_TESTING_interpreter_fail (is); - return; - } - if (GNUNET_OK != - GNUNET_CRYPTO_eddsa_key_from_file (keys, - GNUNET_NO, - &fts->reserve_priv.eddsa_priv)) - { - GNUNET_log_config_invalid (GNUNET_ERROR_TYPE_ERROR, - section, - "TIP_RESERVE_PRIV_FILENAME", - "Failed to read private key"); - GNUNET_free (section); - GNUNET_free (keys); - TALER_TESTING_interpreter_fail (is); - return; - } - fts->reserve_priv_known = true; - GNUNET_free (keys); - GNUNET_free (section); - GNUNET_CONFIGURATION_destroy (cfg); - } - else - { - /* No referenced reserve, no instance to take priv - * from, no explicit subject given: create new key! */ - GNUNET_CRYPTO_eddsa_key_create (&fts->reserve_priv.eddsa_priv); - fts->reserve_priv_known = true; - } + /* No referenced reserve, no instance to take priv + * from, no explicit subject given: create new key! */ + GNUNET_CRYPTO_eddsa_key_create (&fts->reserve_priv.eddsa_priv); + fts->reserve_priv_known = true; } if (! have_public) GNUNET_CRYPTO_eddsa_key_get_public (&fts->reserve_priv.eddsa_priv, @@ -621,47 +564,6 @@ TALER_TESTING_cmd_admin_add_incoming_with_ref /** - * Create "/admin/add-incoming" CMD, letting the caller specifying - * the merchant instance. This version is useful when a tip - * reserve should be topped up, in fact the interpreter will need - * the "tipping instance" in order to get the instance public key - * and make a wire transfer subject out of it. - * - * @param label command label. - * @param amount amount to transfer. - * @param payto_debit_account which account (expressed as a number) - * gives money - * @param auth authentication data - * @param instance the instance that runs the tipping. Under this - * instance, the configuration file will provide the private - * key of the tipping reserve. This data will then used to - * construct the wire transfer subject line. - * @param config_filename configuration file to use. - * @return the command. - */ -struct TALER_TESTING_Command -TALER_TESTING_cmd_admin_add_incoming_with_instance - (const char *label, - const char *amount, - const struct TALER_BANK_AuthenticationData *auth, - const char *payto_debit_account, - const char *instance, - const char *config_filename) -{ - struct AdminAddIncomingState *fts; - - fts = make_fts (amount, - auth, - payto_debit_account); - fts->instance = instance; - fts->config_filename = config_filename; - - return make_command (label, - fts); -} - - -/** * Modify a fakebank transfer command to enable retries when the * reserve is not yet full or we get other transient errors from the * fakebank. |