diff options
Diffstat (limited to 'src')
| -rwxr-xr-x | src/auditor/test-auditor.sh | 206 |
1 files changed, 180 insertions, 26 deletions
diff --git a/src/auditor/test-auditor.sh b/src/auditor/test-auditor.sh index 8122307c5..b46301e8b 100755 --- a/src/auditor/test-auditor.sh +++ b/src/auditor/test-auditor.sh @@ -9,7 +9,7 @@ set -eu # Set of numbers for all the testcases. # When adding new tests, increase the last number: -ALL_TESTS=`seq 1 4` +ALL_TESTS=`seq 0 4` # $TESTS determines which tests we should run. # This construction is used to make it easy to @@ -37,7 +37,9 @@ function exit_fail() { } # Run audit process on current database, including report -# generation. +# generation. Pass "aggregator" as $1 to run +# $ taler-exchange-aggregator +# before auditor (to trigger pending wire transfers). function run_audit () { # Launch bank echo "Launching bank" @@ -50,14 +52,20 @@ function run_audit () { done echo "OK" + if test ${1:-no} = "aggregator" + then + echo "Running exchange aggregator" + taler-exchange-aggregator -t -c test-auditor.conf + fi + # Run the auditor! echo "Running audit(s)" - taler-auditor -r -c test-auditor.conf -m $MASTER_PUB > test-audit.json || exit_fail "auditor failed" + taler-auditor -r -c test-auditor.conf -m $MASTER_PUB > test-audit.json 2> test-audit.log || exit_fail "auditor failed" - taler-wire-auditor -r -c test-auditor.conf -m $MASTER_PUB > test-wire-audit.json || exit_fail "wire auditor failed" + taler-wire-auditor -r -c test-auditor.conf -m $MASTER_PUB > test-wire-audit.json 2> test-wire-audit.log || exit_fail "wire auditor failed" echo "Shutting down services" - kill `jobs -p` + kill `jobs -p` || true echo "TeXing" ../../contrib/render.py test-audit.json test-wire-audit.json < ../../contrib/auditor-report.tex.j2 > test-report.tex || exit_fail "Renderer failed" @@ -67,24 +75,79 @@ function run_audit () { } -# test required commands exist -echo "Testing for jq" -jq -h > /dev/null || exit_skip "jq required" -echo "Testing for taler-bank-manage" -taler-bank-manage -h >/dev/null </dev/null || exit_skip "taler-bank-manage required" -echo "Testing for pdflatex" -which pdflatex > /dev/null </dev/null || exit_skip "pdflatex required" +# Do a full reload of the (original) database +full_reload() +{ + dropdb $DB 2> /dev/null || true + createdb -T template0 $DB || exit_skip "could not create database" + # Import pre-generated database, -q(ietly) using single (-1) transaction + psql -Aqt $DB -q -1 -f ../benchmark/auditor-basedb.sql > /dev/null +} -echo "Database setup" -DB=taler-auditor-test -dropdb $DB 2> /dev/null || true -createdb -T template0 $DB || exit_skip "could not create database" -# Import pre-generated database, -q(ietly) using single (-1) transaction -psql $DB -q -1 -f ../benchmark/auditor-basedb.sql > /dev/null -MASTER_PUB=`cat ../benchmark/auditor-basedb.mpub` +test_0() { + +echo "===========0: normal run with aggregator===========" +run_audit aggregator + +echo "Checking output" +# if an emergency was detected, that is a bug and we should fail +echo -n "Test for emergencies... " +jq -e .emergencies[0] < test-audit.json > /dev/null && exit_fail "Unexpected emergency detected in ordinary run" || echo OK + +jq -e .emergencies_by_count[0] < test-audit.json > /dev/null && exit_fail "Unexpected emergency by count detected in ordinary run" || echo OK + +echo -n "Test for wire inconsistencies... " +jq -e .wire_out_amount_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected wire out inconsistency detected in ordinary run" +jq -e .reserve_in_amount_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected reserve in inconsistency detected in ordinary run" +jq -e .missattribution_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected missattribution inconsistency detected in ordinary run" +jq -e .row_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected row inconsistency detected in ordinary run" +jq -e .row_minor_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected minor row inconsistency detected in ordinary run" +jq -e .lag_details[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected lag detected in ordinary run" +jq -e .wire_format_inconsistencies[0] < test-wire-audit.json > /dev/null && exit_fail "Unexpected wire format inconsistencies detected in ordinary run" + +# FIXME: check operation balances are correct (once we have more transaction types) +# FIXME: check revenue summaries are correct (once we have more transaction types) + +echo OK + +echo -n "Test for wire amounts... " +WIRED=`jq -r .total_wire_in_delta_plus < test-wire-audit.json` +if test $WIRED != "TESTKUDOS:0" +then + exit_fail "Expected total wire delta plus wrong, got $WIRED" +fi +WIRED=`jq -r .total_wire_in_delta_minus < test-wire-audit.json` +if test $WIRED != "TESTKUDOS:0" +then + exit_fail "Expected total wire delta minus wrong, got $WIRED" +fi +WIRED=`jq -r .total_wire_out_delta_plus < test-wire-audit.json` +if test $WIRED != "TESTKUDOS:0" +then + exit_fail "Expected total wire delta plus wrong, got $WIRED" +fi +WIRED=`jq -r .total_wire_out_delta_minus < test-wire-audit.json` +if test $WIRED != "TESTKUDOS:0" +then + exit_fail "Expected total wire delta minus wrong, got $WIRED" +fi +WIRED=`jq -r .total_missattribution_in < test-wire-audit.json` +if test $WIRED != "TESTKUDOS:0" +then + exit_fail "Expected total missattribution in wrong, got $WIRED" +fi +# FIXME: check NO lag reported +# cannot easily undo aggregator, hence full reload +full_reload +echo "OK" +} + + +# Run without aggregator, hence auditor should detect wire +# transfer lag! test_1() { echo "===========1: normal run===========" @@ -111,6 +174,8 @@ jq -e .wire_format_inconsistencies[0] < test-wire-audit.json > /dev/null && exit echo OK +# FIXME: check wire transfer lag reported (no aggregator!) + echo -n "Test for wire amounts... " WIRED=`jq -r .total_wire_in_delta_plus < test-wire-audit.json` if test $WIRED != "TESTKUDOS:0" @@ -137,14 +202,16 @@ if test $WIRED != "TESTKUDOS:0" then exit_fail "Expected total missattribution in wrong, got $WIRED" fi +# Database was unmodified, no need to undo echo "OK" } +# Change amount of wire transfer reported by exchange test_2() { echo "===========2: reserves_in inconsitency===========" -echo "UPDATE reserves_in SET credit_val=5 WHERE reserve_in_serial_id=1" | psql $DB +echo "UPDATE reserves_in SET credit_val=5 WHERE reserve_in_serial_id=1" | psql -Aqt $DB run_audit @@ -178,7 +245,7 @@ fi echo OK # Undo database modification -echo "UPDATE reserves_in SET credit_val=10 WHERE reserve_in_serial_id=1" | psql $DB +echo "UPDATE reserves_in SET credit_val=10 WHERE reserve_in_serial_id=1" | psql -Aqt $DB } @@ -188,7 +255,7 @@ echo "UPDATE reserves_in SET credit_val=10 WHERE reserve_in_serial_id=1" | psql test_3() { echo "===========3: reserves_in inconsitency===========" -echo "UPDATE reserves_in SET credit_val=15 WHERE reserve_in_serial_id=1" | psql $DB +echo "UPDATE reserves_in SET credit_val=15 WHERE reserve_in_serial_id=1" | psql -Aqt $DB run_audit @@ -241,7 +308,7 @@ then fi # Undo database modification -echo "UPDATE reserves_in SET credit_val=10 WHERE reserve_in_serial_id=1" | psql $DB +echo "UPDATE reserves_in SET credit_val=10 WHERE reserve_in_serial_id=1" | psql -Aqt $DB } @@ -252,7 +319,7 @@ test_4() { echo "===========4: deposit wire target wrong=================" # Original target bank account was 43, changing to 44 -echo "UPDATE deposits SET wire='{\"url\":\"payto://x-taler-bank/localhost:8082/44\",\"salt\":\"test-salt (must be constant for aggregation tests)\"}' WHERE deposit_serial_id=1" | psql $DB +echo "UPDATE deposits SET wire='{\"url\":\"payto://x-taler-bank/localhost:8082/44\",\"salt\":\"test-salt (must be constant for aggregation tests)\"}' WHERE deposit_serial_id=1" | psql -Aqt $DB run_audit @@ -281,16 +348,102 @@ then fi # Undo: -echo "UPDATE deposits SET wire='{\"url\":\"payto://x-taler-bank/localhost:8082/43\",\"salt\":\"test-salt (must be constant for aggregation tests)\"}' WHERE deposit_serial_id=1" | psql $DB +echo "UPDATE deposits SET wire='{\"url\":\"payto://x-taler-bank/localhost:8082/43\",\"salt\":\"test-salt (must be constant for aggregation tests)\"}' WHERE deposit_serial_id=1" | psql -Aqt $DB } +# Test where h_contract_terms in the deposit table is wrong +# (=> bad signature) +test_5() { +echo "===========5: deposit contract hash wrong=================" +# Modify h_wire hash, so it is inconsistent with 'wire' +OLD_H=`echo 'SELECT h_contract_terms FROM deposits WHERE deposit_serial_id=1;' | psql taler-auditor-test -Aqt` +echo "UPDATE deposits SET h_contract_terms='\x12bb676444955c98789f219148aa31899d8c354a63330624d3d143222cf3bb8b8e16f69accd5a8773127059b804c1955696bf551dd7be62719870613332aa8d5' WHERE deposit_serial_id=1" | psql -Aqt $DB + +run_audit + +ROW=`jq -e .bad_sig_losses[0].row < test-audit.json` +if test $ROW != 1 +then + exit_fail "Row wrong, got $ROW" +fi + +LOSS=`jq -r .bad_sig_losses[0].loss < test-audit.json` +if test $LOSS != "TESTKUDOS:0.1" +then + exit_fail "Wrong deposit bad signature loss, got $LOSS" +fi + +OP=`jq -r .bad_sig_losses[0].operation < test-audit.json` +if test $OP != "deposit" +then + exit_fail "Wrong operation, got $OP" +fi + +LOSS=`jq -r .total_bad_sig_loss < test-audit.json` +if test $LOSS != "TESTKUDOS:0.1" +then + exit_fail "Wrong total bad sig loss, got $LOSS" +fi +# Undo: +echo "UPDATE deposits SET h_contract_terms='${OLD_H}' WHERE deposit_serial_id=1" | psql -Aqt $DB +} + + + + +# Test where h_wire in the deposit table is wrong +test_99() { +echo "===========99: deposit wire hash wrong=================" +# Modify h_wire hash, so it is inconsistent with 'wire' +echo "UPDATE deposits SET h_wire='\x973e52d193a357940be9ef2939c19b0575ee1101f52188c3c01d9005b7d755c397e92624f09cfa709104b3b65605fe5130c90d7e1b7ee30f8fc570f39c16b853' WHERE deposit_serial_id=1" | psql -Aqt $DB + +# The auditor checks h_wire consistency only for +# coins where the wire transfer has happened, hence +# run aggregator first to get this test to work. +# +# FIXME: current test database has transfers still +# in the *distant* future, test cannot yet work. +# patch up once DB was re-generated! +run_audit aggregator + +# FIXME: check for the respective inconsistency in the report! + +# Undo: +# echo "UPDATE deposits SET h_wire='\x973e52d193a357940be9ef2939c19b0575ee1101f52188c3c01d9005b7d755c397e92624f09cfa709104b3b65605fe5130c90d7e1b7ee30f8fc570f39c16b852' WHERE deposit_serial_id=1" | psql -Aqt $DB + +} + + + + +# ************************************************** # Add more tests here! :-) +# ************************************************** + + +# *************** Main logic starts here ************** + +# Setup globals +DB=taler-auditor-test +MASTER_PUB=`cat ../benchmark/auditor-basedb.mpub` + +# test required commands exist +echo "Testing for jq" +jq -h > /dev/null || exit_skip "jq required" +echo "Testing for taler-bank-manage" +taler-bank-manage -h >/dev/null </dev/null || exit_skip "taler-bank-manage required" +echo "Testing for pdflatex" +which pdflatex > /dev/null </dev/null || exit_skip "pdflatex required" + +echo "Database setup" +full_reload +# Run test suite fail=0 for i in $TESTS do @@ -303,6 +456,7 @@ done echo "Cleanup" -#$ dropdb $DB +# dropdb $DB +# rm -f test-audit.log test-wire-audit.log exit $fail |