diff options
Diffstat (limited to 'src/testing/taler-unified-setup.sh')
-rwxr-xr-x | src/testing/taler-unified-setup.sh | 351 |
1 files changed, 105 insertions, 246 deletions
diff --git a/src/testing/taler-unified-setup.sh b/src/testing/taler-unified-setup.sh index eba903910..a5bba70db 100755 --- a/src/testing/taler-unified-setup.sh +++ b/src/testing/taler-unified-setup.sh @@ -70,7 +70,7 @@ START_FAKEBANK=0 START_AGGREGATOR=0 START_MERCHANT=0 START_NEXUS=0 -START_SANDBOX=0 +START_BANK=0 START_TRANSFER=0 START_WIREWATCH=0 USE_ACCOUNT="exchange-account-1" @@ -87,7 +87,7 @@ while getopts ':abc:d:efghL:mnr:stu:vwW' OPTION; do START_AUDITOR="1" ;; b) - START_BACKUP="1" + START_BANK="1" ;; c) CONF_ORIG="$OPTARG" @@ -104,7 +104,7 @@ while getopts ':abc:d:efghL:mnr:stu:vwW' OPTION; do h) echo 'Supported options:' echo ' -a -- start auditor' - echo ' -b -- start backup/sync' + echo ' -b -- start bank' # shellcheck disable=SC2016 echo ' -c $CONF -- set configuration' # shellcheck disable=SC2016 @@ -119,7 +119,7 @@ while getopts ':abc:d:efghL:mnr:stu:vwW' OPTION; do echo ' -n -- start nexus' # shellcheck disable=SC2016 echo ' -r $MEX -- which exchange to use at the merchant (optional)' - echo ' -s -- start sandbox' + echo ' -s -- start backup/sync' echo ' -t -- start transfer' # shellcheck disable=SC2016 echo ' -u $SECTION -- exchange account to use' @@ -143,7 +143,7 @@ while getopts ':abc:d:efghL:mnr:stu:vwW' OPTION; do USE_MERCHANT_EXCHANGE="$OPTARG" ;; s) - START_SANDBOX="1" + START_BACKUP="1" ;; t) START_TRANSFER="1" @@ -208,28 +208,37 @@ CURRENCY=$(taler-config -c "$CONF" -s "TALER" -o "CURRENCY") echo "Setting up for $CURRENCY at $EXCHANGE_URL" -register_sandbox_account() { - export LIBEUFIN_SANDBOX_USERNAME="$1" - export LIBEUFIN_SANDBOX_PASSWORD="$2" - # FIXME-MS: delete should be removed after we make 'register' idempotent! - libeufin-cli sandbox \ - demobank \ - delete \ - --bank-account "$1" &> /dev/null || true - +register_bank_account() { + wget \ + --http-user="$AUSER" \ + --http-password="$APASS" \ + --method=DELETE \ + -o /dev/null \ + -O /dev/null \ + "http://localhost:${BANK_PORT}/accounts/$1" \ + || true # deletion may fail, that's OK! + if [ "$3" = "exchange" || "$3" = "Exchange" ] + then + IS_EXCHANGE="true" + else + IS_EXCHANGE="false" + fi MAYBE_IBAN="${4:-}" - if test -n "$MAYBE_IBAN"; then - libeufin-cli sandbox \ - demobank \ - register --name "$3" --iban "$MAYBE_IBAN" + if test -n "$MAYBE_IBAN"; + then + # Note: this assumes that $3 has no spaces. Should probably escape in the future.. + PAYTO="payto://SANDBOXX/${MAYBE_IBAN}?receiver-name=$3" + BODY='{username="'"$1"'",password="'"$2"'",is_taler_exchange='"$IS_EXCHANGE"',name="'"$3"'",internal_payto_uri="'"$PAYTO"'"}' else - libeufin-cli sandbox \ - demobank \ - register --name "$3" + BODY='{username="'"$1"'",password="'"$2"'",is_taler_exchange='"$IS_EXCHANGE"',name="'"$3"'"}' fi - - unset LIBEUFIN_SANDBOX_USERNAME - unset LIBEUFIN_SANDBOX_PASSWORD + wget \ + --http-user="$AUSER" \ + --http-password="$APASS" \ + --method=POST \ + --body-data="${BODY}" \ + -a wget.log \ + "http://localhost:${BANK_PORT}/accounts/$1" } register_fakebank_account() { @@ -249,59 +258,28 @@ register_fakebank_account() { } -if [[ "1" = "$START_NEXUS" || "1" = "$START_FAKEBANK" ]] +if [[ "1" = "$START_BANK" || "1" = "$START_FAKEBANK" ]] then BANK_PORT=$(taler-config -c "$CONF" -s "BANK" -o "HTTP_PORT") - if [ "1" = "$START_NEXUS" ] - then - NEXUS_PORT="$BANK_PORT" - SANDBOX_PORT="1$BANK_PORT" - else - NEXUS_PORT="0" - SANDBOX_PORT="1$BANK_PORT" - fi -else - if [ "1" = "$START_SANDBOX" ] - then - BANK_PORT=$(taler-config -c "$CONF" -s "BANK" -o "HTTP_PORT") - SANDBOX_PORT="$BANK_PORT" - fi + BANK_URL="http://localhost:${BANK_PORT}/" fi -if [ "1" = "$START_SANDBOX" ] +if [ "1" = "$START_BANK" ] then - # - LIBEUFIN_SANDBOX_DB_CONNECTION=$(taler-config -c "$CONF" -s "libeufin-sandbox" -o "DB_CONNECTION") - if [ -n "${PGHOST:+}" ] - then - EHOST=$(echo "$PGHOST" | sed -e "s/\//\\\\\//g") - LIBEUFIN_SANDBOX_DB_CONNECTION=$(echo "$LIBEUFIN_SANDBOX_DB_CONNECTION" | sed -e "s/\/var\/run\/postgresql/$EHOST/") - taler-config -c "$CONF" -s "libeufin-sandbox" -o "DB_CONNECTION" -V "$LIBEUFIN_SANDBOX_DB_CONNECTION" - fi - export LIBEUFIN_SANDBOX_DB_CONNECTION - # Create the default demobank. - echo -n "Configuring sandbox at ${LIBEUFIN_SANDBOX_DB_CONNECTION} " - - libeufin-sandbox reset-tables \ - &> libeufin-sandbox-reset.log - libeufin-sandbox config \ - --currency "$CURRENCY" \ - --users-debt-limit 99999999 \ - --bank-debt-limit 99999999 \ - default &> libeufin-sandbox-config.log + echo -n "Setting up bank database ... " + libeufin-bank-dbinit \ + -r \ + -c "$CONF" \ + &> libeufin-bank-reset.log echo "DONE" - echo "sandbox uses DB at $LIBEUFIN_SANDBOX_DB_CONNECTION" - echo -n "Launching sandbox ... " - export LIBEUFIN_SANDBOX_ADMIN_PASSWORD="secret" - libeufin-sandbox serve \ - --port "$SANDBOX_PORT" \ - > libeufin-sandbox-stdout.log \ - 2> libeufin-sandbox-stderr.log & - echo $! > libeufin-sandbox.pid + echo -n "Launching bank ... " + libeufin-bank serve \ + --port "$BANK_PORT" \ + > libeufin-bank-stdout.log \ + 2> libeufin-bank-stderr.log & + echo $! > libeufin-bank.pid echo "DONE" - export LIBEUFIN_SANDBOX_URL="http://localhost:$SANDBOX_PORT/" - OK="0" - echo -n "Waiting for Sandbox ..." + echo -n "Waiting for Bank ..." for n in $(seq 1 100); do echo -n "." sleep "$DEFAULT_SLEEP" @@ -310,101 +288,56 @@ then --waitretry=0 \ -o /dev/null \ -O /dev/null \ - "$LIBEUFIN_SANDBOX_URL" || continue + "$BANK_URL/config" || continue OK="1" break done if [ "1" != "$OK" ] then - exit_skip "Failed to launch services (sandbox)" + exit_skip "Failed to launch services (bank)" fi echo "OK" - echo -n "Register Sandbox users ..." - # The specified IBAN and name must match the ones hard-coded into - # the C helper for the add-incoming call. Without this value, - # Sandbox won't find the target account to debit along a /add-incoming - # call. - register_sandbox_account fortytwo x "User42" FR7630006000011234567890189 - register_sandbox_account fortythree x "Forty Three" - register_sandbox_account exchange x "Exchange Company" - register_sandbox_account tor x "Tor Project" - register_sandbox_account gnunet x "GNUnet" - register_sandbox_account tutorial x "Tutorial" - register_sandbox_account survey x "Survey" - echo " DONE" - - echo -n "Fixing up exchange's PAYTO_URI in the config ..." - export LIBEUFIN_SANDBOX_USERNAME="exchange" - export LIBEUFIN_SANDBOX_PASSWORD="x" - EXCHANGE_PAYTO=$(libeufin-cli sandbox demobank info --bank-account exchange | jq --raw-output '.paytoUri') - taler-config -c "$CONF" -s "$USE_ACCOUNT" -o "PAYTO_URI" -V "$EXCHANGE_PAYTO" - echo " OK" - - echo -n "Setting this exchange as the bank's default ..." - libeufin-sandbox default-exchange "$EXCHANGE_URL" "$EXCHANGE_PAYTO" + echo -n "Set admin password..." + AUSER="admin" + APASS="secret" + libeufin-bank passwd "$AUSER" "$APASS" echo " OK" - - # Prepare EBICS: create Ebics host and Exchange subscriber. - # Shortly becoming admin to setup Ebics. - export LIBEUFIN_SANDBOX_USERNAME="admin" - export LIBEUFIN_SANDBOX_PASSWORD="secret" - echo -n "Create EBICS host at Sandbox.." - # FIXME-MS: || true should be removed after we make 'create' idempotent! - libeufin-cli sandbox \ - --sandbox-url "$LIBEUFIN_SANDBOX_URL" \ - ebicshost create --host-id talerebics &> libeufin-sandbox-ebicshost-create.log || true - echo "OK" - echo -n "Create exchange EBICS subscriber at Sandbox.." - # FIXME-MS: || true should be removed after we make 'new-ebicssubscriber' idempotent! - libeufin-cli sandbox \ - demobank new-ebicssubscriber --host-id talerebics \ - --user-id exchangeebics --partner-id talerpartner \ - --bank-account exchange &> libeufin-sandbox-ebicsscubscriber.log || true - # that's a username _and_ a bank account name - echo "OK" - unset LIBEUFIN_SANDBOX_USERNAME - unset LIBEUFIN_SANDBOX_PASSWORD fi if [ "1" = "$START_NEXUS" ] then - echo "Setting up Nexus ..." + echo "Nexus currently not supported ..." +fi - # Prepare Nexus, which is the side actually talking - # to the exchange. - LIBEUFIN_NEXUS_DB_CONNECTION=$(taler-config -c "$CONF" -s "libeufin-nexus" -o "DB_CONNECTION") +if [ "1" = "$START_FAKEBANK" ] +then + echo -n "Setting up fakebank ..." + $USE_VALGRIND taler-fakebank-run \ + -c "$CONF" \ + -L "$LOGLEVEL" \ + -n 4 \ + 2> taler-fakebank-run.log & + echo " OK" +fi - if [ -n "${PGHOST:+}" ] - then - EHOST=$(echo "$PGHOST" | sed -e "s/\//\\\\\//g") - LIBEUFIN_NEXUS_DB_CONNECTION=$(echo "$LIBEUFIN_NEXUS_DB_CONNECTION" | sed -e "s/\/var\/run\/postgresql/$EHOST/") - taler-config -c "$CONF" -s "libeufin-nexus" -o "DB_CONNECTION" -V "$LIBEUFIN_NEXUS_DB_CONNECTION" - fi - export LIBEUFIN_NEXUS_DB_CONNECTION - libeufin-nexus reset-tables \ - &> libeufin-nexus-reset.log - - # For convenience, username and password are - # identical to those used at the Sandbox. - echo -n "Create exchange Nexus user ..." - libeufin-nexus superuser exchange --password x - echo "OK" - libeufin-nexus serve --port "$NEXUS_PORT" \ - 2> libeufin-nexus-stderr.log \ - > libeufin-nexus-stdout.log & - echo $! > libeufin-nexus.pid - export LIBEUFIN_NEXUS_URL="http://localhost:$NEXUS_PORT" - echo -n "Waiting for Nexus ..." +if [[ "1" = "$START_NEXUS" || "1" = "$START_FAKEBANK" ]] +then + echo -n "Waiting for the bank" + # Wait for bank to be available (usually the slowest) OK="0" - for n in $(seq 1 100); do + for n in $(seq 1 300) + do echo -n "." sleep "$DEFAULT_SLEEP" - wget --timeout=1 \ - --tries=3 \ + # bank + wget --tries=1 \ --waitretry=0 \ + --timeout=1 \ + --user admin \ + --password secret \ + "http://localhost:${BANK_PORT}/" \ -o /dev/null \ - -O /dev/null \ - "$LIBEUFIN_NEXUS_URL" || continue + -O /dev/null >/dev/null || continue OK="1" break done @@ -413,69 +346,36 @@ then exit_skip "Failed to launch services (bank)" fi echo " OK" - - export LIBEUFIN_NEXUS_USERNAME=exchange - export LIBEUFIN_NEXUS_PASSWORD=x - echo -n "Creating a EBICS connection at Nexus ..." - # FIXME-MS: '||true' should be removed after we make 'new-ebics-connection' idempotent! - libeufin-cli connections new-ebics-connection \ - --ebics-url "http://localhost:$SANDBOX_PORT/ebicsweb" \ - --host-id talerebics \ - --partner-id talerpartner \ - --ebics-user-id exchangeebics \ - talerconn - echo "OK" - - echo -n "Setup EBICS keying ..." - libeufin-cli connections connect talerconn - echo "OK" - echo -n "Download bank account name from Sandbox ..." - libeufin-cli connections download-bank-accounts talerconn - echo "OK" - echo -n "Importing bank account info into Nexus ..." - libeufin-cli connections import-bank-account \ - --offered-account-id exchange \ - --nexus-bank-account-id exchange-nexus \ - talerconn - echo "OK" - echo -n "Setup payments submission task..." - # Tries every second. - libeufin-cli accounts task-schedule \ - --task-type submit \ - --task-name exchange-payments \ - --task-cronspec "* * *" \ - exchange-nexus - echo "OK" - # Tries every second. Ask C52 - echo -n "Setup history fetch task..." - libeufin-cli accounts task-schedule \ - --task-type fetch \ - --task-name exchange-history \ - --task-cronspec "* * *" \ - --task-param-level report \ - --task-param-range-type latest \ - exchange-nexus - echo "OK" - # create Taler facade. - echo -n "Create the Taler facade at Nexus..." - libeufin-cli facades \ - new-taler-wire-gateway-facade \ - --currency TESTKUDOS --facade-name test-facade \ - talerconn exchange-nexus - echo "OK" - # Facade schema: http://localhost:$NEXUS_PORT/facades/test-facade/taler-wire-gateway/ - # FIXME: set the above URL automatically in the configuration? fi if [ "1" = "$START_FAKEBANK" ] then - echo -n "Setting up fakebank ..." - $USE_VALGRIND taler-fakebank-run\ - -c "$CONF" \ - -L "$LOGLEVEL" \ - -n 4 \ - 2> taler-fakebank-run.log & - echo " OK" + echo -n "Register Fakebank users ..." + register_fakebank_account fortytwo x + register_fakebank_account fortythree x + register_fakebank_account exchange x + register_fakebank_account tor x + register_fakebank_account gnunet x + register_fakebank_account tutorial x + register_fakebank_account survey x + echo " DONE" +fi + +if [ "1" = "$START_BANK" ] +then + echo -n "Register bank users ..." + # The specified IBAN and name must match the ones hard-coded into + # the C helper for the add-incoming call. Without this value, + # libeufin-bank won't find the target account to debit along a /add-incoming + # call. + register_bank_account fortytwo x "User42" FR7630006000011234567890189 + register_bank_account fortythree x "Forty Three" + register_bank_account exchange x "Exchange Company" DE989651 + register_bank_account tor x "Tor Project" + register_bank_account gnunet x "GNUnet" + register_bank_account tutorial x "Tutorial" + register_bank_account survey x "Survey" + echo " DONE" fi if [ "1" = "$START_EXCHANGE" ] @@ -595,47 +495,6 @@ then echo " DONE" fi -if [[ "1" = "$START_NEXUS" || "1" = "$START_FAKEBANK" ]] -then - echo -n "Waiting for the bank" - # Wait for bank to be available (usually the slowest) - OK="0" - for n in $(seq 1 300) - do - echo -n "." - sleep "$DEFAULT_SLEEP" - # bank - wget --tries=1 \ - --waitretry=0 \ - --timeout=1 \ - --user admin \ - --password secret \ - "http://localhost:${BANK_PORT}/" \ - -o /dev/null \ - -O /dev/null >/dev/null || continue - OK="1" - break - done - if [ "1" != "$OK" ] - then - exit_skip "Failed to launch services (bank)" - fi - echo " OK" -fi - -if [ "1" = "$START_FAKEBANK" ] -then - echo -n "Register Fakebank users ..." - register_fakebank_account fortytwo x - register_fakebank_account fortythree x - register_fakebank_account exchange x - register_fakebank_account tor x - register_fakebank_account gnunet x - register_fakebank_account tutorial x - register_fakebank_account survey x - echo " DONE" -fi - echo -n "Waiting for Taler services ..." # Wait for all other taler services to be available |