diff options
Diffstat (limited to 'src/auditor/test-auditor.sh')
| -rwxr-xr-x | src/auditor/test-auditor.sh | 229 |
1 files changed, 210 insertions, 19 deletions
diff --git a/src/auditor/test-auditor.sh b/src/auditor/test-auditor.sh index 5dacaf195..da9faee64 100755 --- a/src/auditor/test-auditor.sh +++ b/src/auditor/test-auditor.sh @@ -9,7 +9,7 @@ set -eu # Set of numbers for all the testcases. # When adding new tests, increase the last number: -ALL_TESTS=`seq 0 7` +ALL_TESTS=`seq 0 10` # $TESTS determines which tests we should run. # This construction is used to make it easy to @@ -32,7 +32,7 @@ function exit_skip() { # Exit, with error message (hard failure) function exit_fail() { echo $1 - kill `jobs -p` + kill `jobs -p` >/dev/null 2>/dev/null || true exit 1 } @@ -54,7 +54,7 @@ function run_audit () { if test ${1:-no} = "aggregator" then - echo -e "Running exchange aggregator ..." + echo -n "Running exchange aggregator ..." taler-exchange-aggregator -t -c test-auditor.conf echo " DONE" fi @@ -65,7 +65,7 @@ function run_audit () { taler-wire-auditor -r -c test-auditor.conf -m $MASTER_PUB > test-wire-audit.json 2> test-wire-audit.log || exit_fail "wire auditor failed" echo " DONE" - + kill `jobs -p` || true echo -n "TeXing ..." @@ -245,7 +245,7 @@ fi DELTA=`jq -r .total_wire_in_delta_plus < test-wire-audit.json` if test $DELTA != "TESTKUDOS:5" then - exit_fail "Expected total wire delta plus wrong" + exit_fail "Expected total wire delta plus wrong, got $DELTA" fi echo OK @@ -324,7 +324,7 @@ test_4() { echo "===========4: deposit wire target wrong=================" # Original target bank account was 43, changing to 44 -OLD_WIRE=`echo 'SELECT wire FROM deposits WHERE deposit_serial_id=1;' | psql taler-auditor-test -Aqt` +OLD_WIRE=`echo 'SELECT wire FROM deposits WHERE deposit_serial_id=1;' | psql $DB -Aqt` echo "UPDATE deposits SET wire='{\"url\":\"payto://x-taler-bank/localhost:8082/44\",\"salt\":\"test-salt\"}' WHERE deposit_serial_id=1" | psql -Aqt $DB run_audit @@ -365,7 +365,7 @@ echo "UPDATE deposits SET wire='$OLD_WIRE' WHERE deposit_serial_id=1" | psql -Aq test_5() { echo "===========5: deposit contract hash wrong=================" # Modify h_wire hash, so it is inconsistent with 'wire' -OLD_H=`echo 'SELECT h_contract_terms FROM deposits WHERE deposit_serial_id=1;' | psql taler-auditor-test -Aqt` +OLD_H=`echo 'SELECT h_contract_terms FROM deposits WHERE deposit_serial_id=1;' | psql $DB -Aqt` echo "UPDATE deposits SET h_contract_terms='\x12bb676444955c98789f219148aa31899d8c354a63330624d3d143222cf3bb8b8e16f69accd5a8773127059b804c1955696bf551dd7be62719870613332aa8d5' WHERE deposit_serial_id=1" | psql -Aqt $DB run_audit @@ -405,8 +405,8 @@ echo "UPDATE deposits SET h_contract_terms='${OLD_H}' WHERE deposit_serial_id=1" test_6() { echo "===========6: known_coins signature wrong=================" # Modify denom_sig, so it is wrong -OLD_SIG=`echo 'SELECT denom_sig FROM known_coins LIMIT 1;' | psql taler-auditor-test -Aqt` -COIN_PUB=`echo "SELECT coin_pub FROM known_coins WHERE denom_sig='$OLD_SIG';" | psql taler-auditor-test -Aqt` +OLD_SIG=`echo 'SELECT denom_sig FROM known_coins LIMIT 1;' | psql $DB -Aqt` +COIN_PUB=`echo "SELECT coin_pub FROM known_coins WHERE denom_sig='$OLD_SIG';" | psql $DB -Aqt` echo "UPDATE known_coins SET denom_sig='\x287369672d76616c200a2028727361200a2020287320233542383731423743393036444643303442424430453039353246413642464132463537303139374131313437353746324632323332394644443146324643333445393939413336363430334233413133324444464239413833353833464536354442374335434445304441453035374438363336434541423834463843323843344446304144363030343430413038353435363039373833434431333239393736423642433437313041324632414132414435413833303432434346314139464635394244434346374436323238344143354544364131373739463430353032323241373838423837363535453434423145443831364244353638303232413123290a2020290a20290b' WHERE coin_pub='$COIN_PUB'" | psql -Aqt $DB run_audit @@ -446,10 +446,10 @@ echo "UPDATE known_coins SET denom_sig='$OLD_SIG' WHERE coin_pub='$COIN_PUB'" | test_7() { echo "===========7: reserves_out signature wrong=================" # Modify reserve_sig, so it is bogus -HBE=`echo 'SELECT h_blind_ev FROM reserves_out LIMIT 1;' | psql taler-auditor-test -Aqt` -OLD_SIG=`echo "SELECT reserve_sig FROM reserves_out WHERE h_blind_ev='$HBE';" | psql taler-auditor-test -Aqt` -A_VAL=`echo "SELECT amount_with_fee_val FROM reserves_out WHERE h_blind_ev='$HBE';" | psql taler-auditor-test -Aqt` -A_FRAC=`echo "SELECT amount_with_fee_frac FROM reserves_out WHERE h_blind_ev='$HBE';" | psql taler-auditor-test -Aqt` +HBE=`echo 'SELECT h_blind_ev FROM reserves_out LIMIT 1;' | psql $DB -Aqt` +OLD_SIG=`echo "SELECT reserve_sig FROM reserves_out WHERE h_blind_ev='$HBE';" | psql $DB -Aqt` +A_VAL=`echo "SELECT amount_with_fee_val FROM reserves_out WHERE h_blind_ev='$HBE';" | psql $DB -Aqt` +A_FRAC=`echo "SELECT amount_with_fee_frac FROM reserves_out WHERE h_blind_ev='$HBE';" | psql $DB -Aqt` # Normalize, we only deal with cents in this test-case A_FRAC=`expr $A_FRAC / 1000000` echo "UPDATE reserves_out SET reserve_sig='\x9ef381a84aff252646a157d88eded50f708b2c52b7120d5a232a5b628f9ced6d497e6652d986b581188fb014ca857fd5e765a8ccc4eb7e2ce9edcde39accaa4b' WHERE h_blind_ev='$HBE'" | psql -Aqt $DB @@ -493,12 +493,202 @@ echo "UPDATE reserves_out SET reserve_sig='$OLD_SIG' WHERE h_blind_ev='$HBE'" | } -# NEXT: wire transfer subject disagreement! (for wire-auditor!) +# Test wire transfer subject disagreement! +test_8() { -# NEXT: wire fee disagreement! (for wire-auditor!) +echo "===========8: wire-transfer-subject disagreement===========" +OLD_ID=`echo "SELECT id FROM app_banktransaction WHERE amount='TESTKUDOS:10.00' ORDER BY id LIMIT 1;" | psql $DB -Aqt` +OLD_WTID=`echo "SELECT subject FROM app_banktransaction WHERE id='$OLD_ID';" | psql $DB -Aqt` +NEW_WTID="CK9QBFY972KR32FVA1MW958JWACEB6XCMHHKVFMCH1A780Q12SVG" +echo "UPDATE app_banktransaction SET subject='$NEW_WTID' WHERE id='$OLD_ID';" | psql -Aqt $DB +run_audit -# Test where h_wire in the deposit table is wrong +echo -n "Test for inconsistency detection... " +DIAG=`jq -r .reserve_in_amount_inconsistencies[0].diagnostic < test-wire-audit.json` +if test "x$DIAG" != "xwire subject does not match" +then + exit_fail "Diagnostic wrong: $DIAG (0)" +fi +WTID=`jq -r .reserve_in_amount_inconsistencies[0].wtid < test-wire-audit.json` +if test x$WTID != x"$OLD_WTID" -a x$WTID != x"$NEW_WTID" +then + exit_fail "WTID reported wrong: $WTID" +fi +EX_A=`jq -r .reserve_in_amount_inconsistencies[0].amount_exchange_expected < test-wire-audit.json` +if test x$WTID = x$OLD_WTID -a x$EX_A != x"TESTKUDOS:10" +then + exit_fail "Amount reported wrong: $EX_A" +fi +if test x$WTID = x$NEW_WTID -a x$EX_A != x"TESTKUDOS:0" +then + exit_fail "Amount reported wrong: $EX_A" +fi +DIAG=`jq -r .reserve_in_amount_inconsistencies[1].diagnostic < test-wire-audit.json` +if test "x$DIAG" != "xwire subject does not match" +then + exit_fail "Diagnostic wrong: $DIAG (1)" +fi +WTID=`jq -r .reserve_in_amount_inconsistencies[1].wtid < test-wire-audit.json` +if test $WTID != "$OLD_WTID" -a $WTID != "$NEW_WTID" +then + exit_fail "WTID reported wrong: $WTID" +fi +EX_A=`jq -r .reserve_in_amount_inconsistencies[1].amount_exchange_expected < test-wire-audit.json` +if test $WTID = "$OLD_WTID" -a $EX_A != "TESTKUDOS:10" +then + exit_fail "Amount reported wrong: $EX_A" +fi +if test $WTID = "$NEW_WTID" -a $EX_A != "TESTKUDOS:0" +then + exit_fail "Amount reported wrong: $EX_A" +fi + +WIRED=`jq -r .total_wire_in_delta_minus < test-wire-audit.json` +if test $WIRED != "TESTKUDOS:10" +then + exit_fail "Wrong total wire_in_delta_minus, got $WIRED" +fi +DELTA=`jq -r .total_wire_in_delta_plus < test-wire-audit.json` +if test $DELTA != "TESTKUDOS:10" +then + exit_fail "Expected total wire delta plus wrong, got $DELTA" +fi +echo OK + +# Undo database modification +echo "UPDATE app_banktransaction SET subject='$OLD_WTID' WHERE id='$OLD_ID';" | psql -Aqt $DB + +} + + + +# Test wire origin disagreement! +test_9() { + +echo "===========9: wire-origin disagreement===========" +OLD_ID=`echo "SELECT id FROM app_banktransaction WHERE amount='TESTKUDOS:10.00' ORDER BY id LIMIT 1;" | psql $DB -Aqt` +OLD_ACC=`echo "SELECT debit_account_id FROM app_banktransaction WHERE id='$OLD_ID';" | psql $DB -Aqt` +echo "UPDATE app_banktransaction SET debit_account_id=1;" | psql -Aqt $DB + +run_audit + +echo -n "Test for inconsistency detection... " +AMOUNT=`jq -r .missattribution_in_inconsistencies[0].amount < test-wire-audit.json` +if test "x$AMOUNT" != "xTESTKUDOS:10" +then + exit_fail "Reported amount wrong: $AMOUNT" +fi +AMOUNT=`jq -r .total_missattribution_in < test-wire-audit.json` +if test "x$AMOUNT" != "xTESTKUDOS:10" +then + exit_fail "Reported total amount wrong: $AMOUNT" +fi +echo OK + +# Undo database modification +echo "UPDATE app_banktransaction SET debit_account_id=$OLD_ACC;" | psql -Aqt $DB + +} + + +# Test wire_in timestamp disagreement! +test_10() { + +echo "===========10: wire-timestamp disagreement===========" +OLD_ID=`echo "SELECT id FROM app_banktransaction WHERE amount='TESTKUDOS:10.00' ORDER BY id LIMIT 1;" | psql $DB -Aqt` +OLD_DATE=`echo "SELECT date FROM app_banktransaction WHERE id='$OLD_ID';" | psql $DB -Aqt` +echo "UPDATE app_banktransaction SET date=NOW() WHERE id=$OLD_ID;" | psql -Aqt $DB + +run_audit + +echo -n "Test for inconsistency detection... " +DIAG=`jq -r .row_minor_inconsistencies[0].diagnostic < test-wire-audit.json` +if test "x$DIAG" != "xexecution date missmatch" +then + exit_fail "Reported diagnostic wrong: $DIAG" +fi +TABLE=`jq -r .row_minor_inconsistencies[0].table < test-wire-audit.json` +if test "x$TABLE" != "xreserves_in" +then + exit_fail "Reported table wrong: $TABLE" +fi +echo OK + +# Undo database modification +echo "UPDATE app_banktransaction SET date='$OLD_DATE' WHERE id=$OLD_ID;" | psql -Aqt $DB + +} + + +# Test for extra outgoing wire transfer. +test_11() { + +echo "===========11: spurious outgoing transfer ===========" +OLD_ID=`echo "SELECT id FROM app_banktransaction WHERE amount='TESTKUDOS:10.00' ORDER BY id LIMIT 1;" | psql $DB -Aqt` +OLD_ACC=`echo "SELECT debit_account_id FROM app_banktransaction WHERE id=$OLD_ID;" | psql $DB -Aqt` +# Change wire transfer to be FROM the exchange (#2) to elsewhere! +# (Note: this change also causes a missing incoming wire transfer, but +# this test is only concerned about the outgoing wire transfer +# being detected as such, and we simply ignore the other +# errors being reported.) +echo "UPDATE app_banktransaction SET debit_account_id=2,credit_account_id=1 WHERE id=$OLD_ID;" | psql -Aqt $DB + +run_audit + +echo -n "Test for inconsistency detection... " +AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_wired < test-wire-audit.json` +if test "x$AMOUNT" != "xTESTKUDOS:10" +then + exit_fail "Reported amount wrong: $AMOUNT" +fi +AMOUNT=`jq -r .total_wire_out_delta_minus < test-wire-audit.json` +if test "x$AMOUNT" != "xTESTKUDOS:10" +then + exit_fail "Reported amount wrong: $AMOUNT" +fi +AMOUNT=`jq -r .wire_out_amount_inconsistencies[0].amount_justified < test-wire-audit.json` +if test "x$AMOUNT" != "xTESTKUDOS:0" +then + exit_fail "Reported amount wrong: $AMOUNT" +fi +DIAG=`jq -r .wire_out_amount_inconsistencies[0].diagnostic < test-wire-audit.json` +if test "x$DIAG" != "xjustification for wire transfer not found" +then + exit_fail "Reported diagnostic wrong: $DIAG" +fi +echo OK + +# Undo database modification (exchange always has account #2) +echo "UPDATE app_banktransaction SET debit_account_id=$OLD_ACC,credit_account_id=2 WHERE id=$OLD_ID;" | psql -Aqt $DB + +} + + +# FIXME: Test for wire fee disagreement +test_98() { + +echo "===========11: wire-fee disagreement===========" +echo "UPDATE wire_fee SET wire_fee_frac='100';" | psql -Aqt $DB + +# Wire fees are only checked/generated once there are +# actual outgoing wire transfers, so we need to run the +# aggregator here. +run_audit aggregator + +# FIXME: needs new DB where aggregator does stuff! +# FIXME: check report generation! + +# cannot easily undo aggregator, hence full reload +echo -n "Reloading database ..." +full_reload +echo "DONE" + +} + + + +# FIXME: Test where h_wire in the deposit table is wrong test_99() { echo "===========99: deposit wire hash wrong=================" # Modify h_wire hash, so it is inconsistent with 'wire' @@ -515,9 +705,10 @@ run_audit aggregator # FIXME: check for the respective inconsistency in the report! -# Undo: -# echo "UPDATE deposits SET h_wire='\x973e52d193a357940be9ef2939c19b0575ee1101f52188c3c01d9005b7d755c397e92624f09cfa709104b3b65605fe5130c90d7e1b7ee30f8fc570f39c16b852' WHERE deposit_serial_id=1" | psql -Aqt $DB - +# cannot easily undo aggregator, hence full reload +echo -n "Reloading database ..." +full_reload +echo "DONE" } |