path: root/libraries/libvirt/rc.libvirt

#!/usr/bin/bash
# Init script for libvirtd on Slackware
# Written by Matteo Bernardini <ponce@slackbuilds.org>
#
# Note that a dnsmasq daemon is started by libvirtd itself to serve
# its virtual network, and possibly can conflict with a dnsmasq
# already running on the system, see
# http://wiki.libvirt.org/page/Libvirtd_and_dnsmasq
# Note also that the tun, vhost_net and kvm related modules are
# automatically loaded at start and removed at stop: edit the
# script if this behaviour conflicts with anything else running
# on your setup

MODULES="tun vhost_net"
TIMEOUT=${TIMEOUT:-300}
LIBVIRTD_PIDFILE="/var/run/libvirt/libvirtd.pid"
LIBVIRTD_OPTS=${LIBVIRT_OPTS:-" -v -f /etc/libvirt/libvirtd.conf -p $LIBVIRTD_PIDFILE "}
VIRTLOGD_PIDFILE="/var/run/libvirt/virtlogd.pid"
VIRTLOGD_OPTS=${VIRTLOGD_OPTS:-" -v -f /etc/libvirt/virtlogd.conf -p $VIRTLOGD_PIDFILE "}
VIRTLOCKD_PIDFILE="/var/run/libvirt/virtlockd.pid"
VIRTLOCKD_OPTS=${VIRTLOCKD_OPTS:-" -v -f /etc/libvirt/virtlockd.conf -p $VIRTLOCKD_PIDFILE "}

guests_reboot() {

  for machine in $(/usr/sbin/virsh list --name --state-running | grep -v ^$) ; do
    /usr/sbin/virsh reboot $machine
  done

}

guests_shutdown() {

  for machine in $(/usr/sbin/virsh list --name --state-running | grep -v ^$) ; do
    /usr/sbin/virsh shutdown $machine &
  done

  sleep 2

  echo -n "Waiting for guests to finish shutting down..."

  count=0

  while [ $(/usr/sbin/virsh list --name --state-running | grep -v ^$ | wc -l) -gt "0" ]; do
    if [ "$count" -ge "$TIMEOUT" ];then
      break
    fi
    echo -n "."
    count=$(expr $count + 1)
    sleep 1
  done

  echo ""

  if [ $(/usr/sbin/virsh list --name --state-running | grep -v ^$ | wc -l) -gt "0" ];then

    echo -n "The following guests are still running after $TIMEOUT seconds; destroying them: "
    for machine in $(/usr/sbin/virsh list --name --state-running | grep -v ^$) ; do
      /usr/sbin/virsh destroy $machine
      echo -n "$machine "
    done

    sleep 2
  else
    # add back the seconds we waited before starting the count
    count=$(expr $count + 2)
    echo "Shutdown of guests took $count seconds..."
  fi

}


guests_managedsave() {
  # apply managedsave on running  and paused machines (as we can't distinguish between
  # the two states while managedsave is being applied, so won't know when to finish waiting)

  for machine in $(/usr/sbin/virsh list --name | grep -v ^$) ; do
    /usr/sbin/virsh managedsave $machine &
  done

  sleep 2

  echo -n "Waiting for managedsave to finish on all guests..."

  count = 0

  while [ $(/usr/sbin/virsh list --name | grep -v ^$ | wc -l) -gt "0" ]; do
    if [ "$count" -ge "$TIMEOUT" ];then
      break
    fi
    echo -n "."
    count=$(expr $count + 1)
    sleep 1
  done

  echo ""

  if [ $(/usr/sbin/virsh list --name | grep -v ^$ | wc -l) -gt "0" ];then

    echo -n "Following guests are still running after $TIMEOUT seconds, destroying them: "
    for machine in $(/usr/sbin/virsh list --name | grep -v ^$) ; do
      /usr/sbin/virsh destroy $machine
      echo -n "$machine "
    done

    sleep 2
  else
    # add back the seconds we waited before starting the count
    count=$(expr $count + 2)
    echo "Guests managed save took $count seconds..."
  fi
}

check_processor() {

  egrep 'vmx' /proc/cpuinfo > /dev/null

  if [ "$?" -eq "0" ];then
    MODULES="$MODULES kvm_intel kvm"
  fi

  check=$?

  egrep 'svm' /proc/cpuinfo > /dev/null

  if [ "$?" -eq "0" ];then
    MODULES="$MODULES kvm_amd kvm"
  fi

  check=$(expr $check + $?)

  if [ $check -eq "2" ];then
    echo "Your system does not support KVM!"
  fi

}

start_libvirtd() {
  if [ -f $LIBVIRTD_PIDFILE ];then
    echo "libvirt is already running..."
    exit 1
  fi
  echo "Starting libvirtd:  /usr/sbin/libvirtd -d "
  mkdir -p $(dirname $LIBVIRTD_PIDFILE)
  check_processor
  /sbin/modprobe -a $MODULES
  /usr/sbin/libvirtd -d -l $LIBVIRTD_OPTS
}

stop_libvirtd() {
  if [ ! -f $LIBVIRTD_PIDFILE ];then
    echo "libvirt is not running..."
    exit 2
  fi
  guests_managedsave
  check_processor
  echo "Stopping libvirtd..."
  for network in $(/usr/sbin/virsh net-list --name); do
    /usr/sbin/virsh net-destroy "$network"
  done
  kill -TERM $(cat $LIBVIRTD_PIDFILE)
  sleep 3
  /sbin/modprobe -ra $MODULES 2>/dev/null
}

start_virtlogd() {
  if [ -f $VIRTLOGD_PIDFILE ];then
    echo "virtlogd is already running..."
    exit 1
  fi
  echo "Starting virtlogd:  /usr/sbin/virtlogd -d "
  mkdir -p $(dirname $VIRTLOGD_PIDFILE)
  /usr/sbin/virtlogd -d $VIRTLOGD_OPTS
}

stop_virtlogd() {
  if [ ! -f $VIRTLOGD_PIDFILE ];then
    echo "virtlogd is not running..."
    exit 2
  fi
  echo "Stopping virtlogd..."
  kill -TERM $(cat $VIRTLOGD_PIDFILE)
  sleep 1
}

start_virtlockd() {
  if [ -f $VIRTLOCKD_PIDFILE ];then
    echo "virtlockd is already running..."
    exit 1
  fi
  echo "Starting virtlockd:  /usr/sbin/virtlockd -d "
  mkdir -p $(dirname $VIRTLOCKD_PIDFILE)
  /usr/sbin/virtlockd -d $VIRTLOCKD_OPTS
}

stop_virtlockd() {
  if [ ! -f $VIRTLOCKD_PIDFILE ];then
    echo "virtlockd is not running..."
    exit 2
  fi
  echo "Stopping virtlockd..."
  kill -TERM $(cat $VIRTLOCKD_PIDFILE)
  sleep 1
}

soft_restart() {
  echo "Soft-restarting libvirt..."
  if [ ! -f $LIBVIRTD_PIDFILE ];then
    echo "libvirt is not running..."
    exit 2
  fi
  echo "Stopping libvirtd..."
  kill -TERM $(cat $LIBVIRTD_PIDFILE)
  sleep 3
  stop_virtlogd
  stop_virtlockd
  sleep 1
  start_virtlockd
  start_virtlogd
  start_libvirtd
}

case $1 in
start)
  start_virtlockd
  start_virtlogd
  start_libvirtd
  ;;
stop)
  stop_libvirtd
  stop_virtlogd
  stop_virtlockd
  ;;
restart)
  stop_libvirtd
  stop_virtlogd
  stop_virtlockd
  sleep 2
  start_virtlockd
  start_virtlogd
  start_libvirtd
  ;;
soft_restart)
  soft_restart
  ;;
guests_shutdown)
  guests_shutdown
  ;;
guests_reboot)
  guests_reboot
  ;;
*)
  echo "Usage: $0 (start|stop|restart|soft_restart|guests_shutdown|guests_reboot)"
  ;;
esac