diff options
Diffstat (limited to 'system')
-rw-r--r-- | system/powernowd/README | 62 | ||||
-rw-r--r-- | system/powernowd/powernowd.SlackBuild | 29 |
2 files changed, 32 insertions, 59 deletions
diff --git a/system/powernowd/README b/system/powernowd/README index 2db8eef6bc6b7..a91880329496e 100644 --- a/system/powernowd/README +++ b/system/powernowd/README @@ -1,57 +1,11 @@ -Overview: This is a very simple program that will adjust the speed of your CPU -depending on system load. It works as a client of the CPUFreq driver. -It is designed for use with CPU's supporting AMD's PowerNow power management -scheme, as it's algorithm works better if there are more then two CPU -speeds available. (aka, ARM, AMD K6/K7, Via C3, and Crusoe as opposed to -traditional Intel and Ultrasparc). +depending on system load. -This program is essentially a simple client to the CPUFreq sysfs interface. -This means that you -need- to be running Linux v2.5 or later that includes -the sysfs interface. This daemon will -not- work with the CPUFreq driver -interface included in Linux v2.4. Feel free to write your own daemon -to support that if you like; you can even use this as a starting point. -If there's enough clamoring for it, then maybe I'll whip up something. -You also need a CPU that supports frequency scaling and supports the CPUFreq -interface. This code has been tested on various AMD and PPC processors +It is designed for use with CPU's supporting AMD's PowerNow power +management scheme, as it's algorithm works better if there are more then +two CPU speeds available. (aka, ARM, AMD K6/K7, Via C3, and Crusoe as +opposed to traditional Intel and Ultrasparc). -I have been running this daemon on my AMD laptop for over 2 years with no -problems to report, and it's nice that my laptop remains cool unless I'm -really doing something intensive, like watching DivX movies, without me -having to manually intervene and set the speed. I just recently bought an -Apple iBook G3, and powernowd-0.80 worked flawlessly on it right out of -the box. - - -Features: - -This daemon's goal is simplicity and speed. It doesn't try and make -too many decisions for you. That's its beauty, but it may not be what -everyone's looking for. Some of the features this daemon has: - -One, simple heuristic to determine CPU load: "user + sys" time. -Ignore "niced" programs (setiathome, itself, etc). In my mind this is -consistent with what is meant when someone 'nice's a program to begin -with. (configurable in v0.85+) Designed for CPU's that support more -then two speed states, but works well with anything. Very fast, low -overhead /proc/stat gathering (method stolen from procps). Supports SMP -Will automatically switch to 'userspace' governor. Care taken to make -the code non-root exploitable (but please audit for yourself first!) -Frequency step size is configurable (default to 100MHz/step) 4 different -behavioral modes to choose from (SINE, AGGRESSIVE, PASSIVE, LEAPS), -which determine the behavior when the load changes. Configurable from the -command line. Written in C for speed and simplicity. Logging to stdout -or syslog Configurable Polling frequency in milliseconds (defaults to 1s) -Configurable highwater/lowwater marks for CPU usage. (defaults 80/20%) - -Many similar daemons use other methods to determine what speed to use, -such as battery status, AC status, temperature, fan status, etc. They all -have their place. I however feel that in the grand scheme of things none -of the above matters. When I'm not using my CPU, I don't care if it's -running at a slower speed. When I -am- using my CPU, I only need it to -be fast enough to handle the task at hand without hiccuping. And when I'm -taxing my CPU, I want it running full speed. That's all this daemon does, -monitor CPU load and adjust the speed accordingly. Since in all reality -my CPU is idle 99% of the time (or playing mp3's which it can easily do -at it's lowest speed rating), this by definition leads to low power usage, -low temperatures, low speed fans, and better battery life. +This program is essentially a simple client to the CPUFreq sysfs +interface. This means that you -need- to be running Linux v2.5 or later +that includes the sysfs interface. diff --git a/system/powernowd/powernowd.SlackBuild b/system/powernowd/powernowd.SlackBuild index 7471c54c463bf..5de69f2196d94 100644 --- a/system/powernowd/powernowd.SlackBuild +++ b/system/powernowd/powernowd.SlackBuild @@ -2,7 +2,25 @@ # Slackware build script for powernowd -# Written by David Woodfall <dave@slackbuilds.org> +# Copyright 2022 Dave Woodfall <dave@slackbuilds.org> +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. cd $(dirname $0) ; CWD=$(pwd) @@ -61,17 +79,18 @@ find -L . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -sed -i "s%-O2%$SLKCFLAGS%" Makefile +# gnu90 finds the inline function inside the enum. Using static also seems +# to work. +sed -i "s%-O2%-std=gnu90 $SLKCFLAGS%" Makefile sed -i "s%/usr/sbin%$PKG/usr/sbin%" Makefile make make install # Remove trailing whitespace at the same time -cat powernowd.init | sed "s%\s*$%%" > $PKG/etc/rc.d/rc.powernowd.new +sed "s,[[:space:]]\+$,," powernowd.init > $PKG/etc/rc.d/rc.powernowd.new -find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \ - | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true +strip --strip-unneeded $PKG/usr/sbin/powernowd mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION cp -a \ |