diff options
Diffstat (limited to 'system/xen')
62 files changed, 5729 insertions, 13681 deletions
diff --git a/system/xen/README b/system/xen/README index 2999a8e54d26b..8d0b33616e7ea 100644 --- a/system/xen/README +++ b/system/xen/README @@ -14,7 +14,6 @@ This script has a few optional dependencies: Linking with the stock libraries: - bluez - enable with USE_BLUEZ=yes gtk - enable with USE_GTK=yes audio - enable with USE_AUDIO=yes (or a comma-delimited list: oss alsa sdl pa) diff --git a/system/xen/dom0/README.dom0 b/system/xen/dom0/README.dom0 index 68dbf815fb75b..dfed12dfcba07 100644 --- a/system/xen/dom0/README.dom0 +++ b/system/xen/dom0/README.dom0 @@ -1,77 +1,89 @@ kernel-xen.sh: This script builds the Linux Kernel for a Xen Hypervisor. -Kernel configuration files included here are based on generic Slackware config -files. For 32bit systems, SMP config was used. To run "make menuconfig" before -compiling Xen kernel, use: +* Kernel config files found here are based on generic Slackware ones with + some Xen settings enabled to get it going. Only x86_64 architecture is now + supported because Xen no longer builds a 32-bit VMM image. This readme is + by no means complete or a replacement for Linux Kernel and Xen docs. + +* To run "make menuconfig" before compiling Xen kernel, use: MENUCONFIG=yes ./kernel-xen.sh -Originally, booting Xen kernel with LILO bootloader is not supported, and GRUB -has to be used. With mbootpack this has changed, and LILO can be used as well. -Basically, mbootpack takes Linux kernel, initrd and Xen VMM, and packages them -up into a file that looks like a bzImage Linux kernel. This script will select -LILO by default, changing to GRUB is easy: +* This script will also create an initrd image, with the following defaults: + + ROOTMOD=ext4 ROOTFS=ext4 ROOTDEV=/dev/sda2 ./kernel-xen.sh + +* Booting LILO with mbootpack has shown to be unreliable, and the easiest + method is to use EXTLINUX from Syslinux package. In this example, device + /dev/sda1 would have an ext2 filesystem mounted to /boot. + + !!! Make sure to understand what are you doing at this point, you could + easily lose your data. Always create backups !!! + + * To check and set the legacy BIOS bootable flag (bit 2 attribute): + + sgdisk /dev/sda --attributes=1:show + sgdisk /dev/sda --attributes=1:set:2 - BOOTLOADER=grub ./kernel-xen.sh + * Install the binary: -Slackware generic kernel requires initrd image, this script assumes root is on -/dev/sda2 and filesystem is ext4, changes are made with: + mkdir /boot/extlinux + extlinux --install /boot/extlinux + dd if=/usr/share/syslinux/gptmbr.bin of=/dev/sda + cp -a /usr/share/syslinux/mboot.c32 /boot/extlinux/ - ROOTMOD=ext3 ROOTFS=ext3 ROOTDEV=/dev/sda5 ./kernel-xen.sh + * Edit the /boot/extlinux/extlinux.conf file: -When using LILO bootloader, this is what the lilo.conf should have: + default XenLinux + prompt 1 + timeout 50 + label XenLinux + kernel mboot.c32 + append /xen.gz --- /vmlinuz-xen root=/dev/sda2 nomodeset --- /initrd-xen.gz - image = /boot/vmlinuz-xen - root = /dev/sda2 - label = XenLinux - append="dom0_mem=512M -- nomodeset" - read-only +* When using GRUB, /boot/grub/menu.lst should looks something like this: -Everything on the left side of "--" is passed to Xen kernel, and what's on the -right, goes to Linux kernel. + title Slackware XenLinux 15.0 + root (hd0,0) + kernel /boot/xen.gz dom0_mem=524288 console=vga + module /boot/vmlinuz-xen root=/dev/sda2 ro console=tty0 nomodeset + module /boot/initrd-xen.gz -When using GRUB, /boot/grub/menu.lst should have these: +* Booting Xen on a native EFI system (non-BIOS legacy mode) is probably the + best option, but the only clean solution at this time requires a modified + binutils package. More experienced user can add "x86_64-pep" to the list of + enabled targets and build/replace binutils on their system. Subsequently, + building Xen will then also create a Xen EFI binary. - title Slackware XenLinux 14.2 - root (hd0,0) - kernel /boot/xen.gz dom0_mem=524288 console=vga - module /boot/vmlinuz-xen root=/dev/sda2 ro console=tty0 nomodeset - module /boot/initrd-xen.gz + * To make things a bit easier, a copy of Xen EFI binary can be found here: -Booting Xen on a native EFI system is also an option, but the only clean -solution at this time requires a modified binutils package. More experienced -user can add "x86_64-pep" to the list of enabled targets and build/replace -binutils on their system. Subsequently, building Xen will now also create a -Xen EFI binary. + http://slackware.hr/~mario/xen/xen-4.15.0.efi.gz -To make things a bit easier, a copy of Xen EFI binary can be found here: + !!! Make sure to understand what are you doing at this point, you could + easily lose your data. Always create backups !!! - http://slackware.hr/~mario/xen/xen-4.13.1.efi.gz + * In this example, partition /dev/sda1 with EF or EF00 type, and do: -If an automatic boot to Xen kernel is desired, the binary should be renamed and -copied to the following location: /boot/efi/EFI/BOOT/bootx64.efi -Downloaded binary should be unpacked first, and the config file should be -present in the same directory (same file name, minus the suffix). -For example: "xen.cfg" or "bootx64.cfg", and its contents: + mkfs.vfat /dev/sda1 + mkdir /boot/efi + mount /dev/sda1 /boot/efi - [global] - default=xen + * Copy/unpack EFI binary to /boot/efi/EFI/BOOT/bootx64.efi and edit + /boot/efi/EFI/BOOT/bootx64.cfg file to add these: - [xen] - options=dom0_mem=min:512M,max:512M,512M - kernel=vmlinuz-xen root=/dev/sda2 ro console=tty0 nomodeset - ramdisk=initrd-xen.gz + [global] + default=XenLinux + [XenLinux] + options=dom0_mem=min:512M,max:512M,512M + kernel=vmlinuz-xen root=/dev/sda2 ro console=tty0 nomodeset + ramdisk=initrd-xen.gz -There are some other EFI bootloaders, for example ELILO comes with the support -for VMM images, but their x86 support is lacking. GRUB2 apparently supports -only the chainloader method; however, the stock Slackware version is too old -for this task. rEFInd should work, but the Xen EFI method was satisfactory to -the author :-) +* Many more boot options are supported, this readme covers only some examples! -Troubleshooting dom0 crashes, freezes, blank screen and such: +* Troubleshooting dom0 crashes, freezes, blank screen at boot, etc: - * Use /proc/fb to find an out of range device id, for example this can be - added to Linux kernel: fbcon=map:9 - * Look in dmesg/lsmod for potential framebuffer devices to blacklist + * Set an out-of-range device id, eg. fbcon=map:9 (Look for more in /proc/fb) + * Blacklist framebuffer devices (Look in dmesg/lsmod) * Compile Linux kernel with CONFIG_FB=n + * Use a serial cable to see early boot messages * Use another VGA card :-) diff --git a/system/xen/dom0/config-4.4.240-xen.i686 b/system/xen/dom0/config-4.4.240-xen.i686 deleted file mode 100644 index 4bc001ee5848e..0000000000000 --- a/system/xen/dom0/config-4.4.240-xen.i686 +++ /dev/null @@ -1,7450 +0,0 @@ -# -# Automatically generated file; DO NOT EDIT. -# Linux/x86 4.4.240 Kernel Configuration -# -# CONFIG_64BIT is not set -CONFIG_X86_32=y -CONFIG_X86=y -CONFIG_INSTRUCTION_DECODER=y -CONFIG_PERF_EVENTS_INTEL_UNCORE=y -CONFIG_OUTPUT_FORMAT="elf32-i386" -CONFIG_ARCH_DEFCONFIG="arch/x86/configs/i386_defconfig" -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_MMU=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_HAS_CPU_RELAX=y -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y -CONFIG_HAVE_SETUP_PER_CPU_AREA=y -CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y -CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y -CONFIG_HAVE_INTEL_TXT=y -CONFIG_X86_32_SMP=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_PGTABLE_LEVELS=3 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" -CONFIG_IRQ_WORK=y -CONFIG_BUILDTIME_EXTABLE_SORT=y - -# -# General setup -# -CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_CROSS_COMPILE="" -# CONFIG_COMPILE_TEST is not set -CONFIG_LOCALVERSION="-xen" -# CONFIG_LOCALVERSION_AUTO is not set -CONFIG_HAVE_KERNEL_GZIP=y -CONFIG_HAVE_KERNEL_BZIP2=y -CONFIG_HAVE_KERNEL_LZMA=y -CONFIG_HAVE_KERNEL_XZ=y -CONFIG_HAVE_KERNEL_LZO=y -CONFIG_HAVE_KERNEL_LZ4=y -# CONFIG_KERNEL_GZIP is not set -# CONFIG_KERNEL_BZIP2 is not set -CONFIG_KERNEL_LZMA=y -# CONFIG_KERNEL_XZ is not set -# CONFIG_KERNEL_LZO is not set -# CONFIG_KERNEL_LZ4 is not set -CONFIG_DEFAULT_HOSTNAME="darkstar" -CONFIG_SWAP=y -CONFIG_SYSVIPC=y -CONFIG_SYSVIPC_SYSCTL=y -CONFIG_POSIX_MQUEUE=y -CONFIG_POSIX_MQUEUE_SYSCTL=y -CONFIG_CROSS_MEMORY_ATTACH=y -CONFIG_FHANDLE=y -# CONFIG_USELIB is not set -CONFIG_AUDIT=y -CONFIG_HAVE_ARCH_AUDITSYSCALL=y -CONFIG_AUDITSYSCALL=y -CONFIG_AUDIT_WATCH=y -CONFIG_AUDIT_TREE=y - -# -# IRQ subsystem -# -CONFIG_GENERIC_IRQ_PROBE=y -CONFIG_GENERIC_IRQ_SHOW=y -CONFIG_GENERIC_PENDING_IRQ=y -CONFIG_GENERIC_IRQ_CHIP=y -CONFIG_IRQ_DOMAIN=y -CONFIG_IRQ_DOMAIN_HIERARCHY=y -CONFIG_GENERIC_MSI_IRQ=y -CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -# CONFIG_IRQ_DOMAIN_DEBUG is not set -CONFIG_IRQ_FORCED_THREADING=y -CONFIG_SPARSE_IRQ=y -CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y -CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y -CONFIG_GENERIC_TIME_VSYSCALL=y -CONFIG_GENERIC_CLOCKEVENTS=y -CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y -CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y -CONFIG_GENERIC_CMOS_UPDATE=y - -# -# Timers subsystem -# -CONFIG_TICK_ONESHOT=y -CONFIG_NO_HZ_COMMON=y -# CONFIG_HZ_PERIODIC is not set -CONFIG_NO_HZ_IDLE=y -CONFIG_NO_HZ=y -CONFIG_HIGH_RES_TIMERS=y - -# -# CPU/Task time and stats accounting -# -CONFIG_TICK_CPU_ACCOUNTING=y -# CONFIG_IRQ_TIME_ACCOUNTING is not set -CONFIG_BSD_PROCESS_ACCT=y -CONFIG_BSD_PROCESS_ACCT_V3=y -CONFIG_TASKSTATS=y -CONFIG_TASK_DELAY_ACCT=y -CONFIG_TASK_XACCT=y -CONFIG_TASK_IO_ACCOUNTING=y - -# -# RCU Subsystem -# -CONFIG_TREE_RCU=y -# CONFIG_RCU_EXPERT is not set -CONFIG_SRCU=y -# CONFIG_TASKS_RCU is not set -CONFIG_RCU_STALL_COMMON=y -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_RCU_EXPEDITE_BOOT is not set -CONFIG_BUILD_BIN2C=y -CONFIG_IKCONFIG=y -CONFIG_IKCONFIG_PROC=y -CONFIG_LOG_BUF_SHIFT=18 -CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 -CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y -CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y -CONFIG_CGROUPS=y -# CONFIG_CGROUP_DEBUG is not set -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_PIDS=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CPUSETS=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_CGROUP_CPUACCT=y -CONFIG_PAGE_COUNTER=y -CONFIG_MEMCG=y -CONFIG_MEMCG_SWAP=y -# CONFIG_MEMCG_SWAP_ENABLED is not set -CONFIG_MEMCG_KMEM=y -CONFIG_CGROUP_PERF=y -CONFIG_CGROUP_SCHED=y -CONFIG_FAIR_GROUP_SCHED=y -CONFIG_CFS_BANDWIDTH=y -CONFIG_RT_GROUP_SCHED=y -CONFIG_BLK_CGROUP=y -# CONFIG_DEBUG_BLK_CGROUP is not set -CONFIG_CGROUP_WRITEBACK=y -# CONFIG_CHECKPOINT_RESTORE is not set -CONFIG_NAMESPACES=y -CONFIG_UTS_NS=y -CONFIG_IPC_NS=y -CONFIG_USER_NS=y -CONFIG_PID_NS=y -CONFIG_NET_NS=y -# CONFIG_SCHED_AUTOGROUP is not set -# CONFIG_SYSFS_DEPRECATED is not set -CONFIG_RELAY=y -CONFIG_BLK_DEV_INITRD=y -CONFIG_INITRAMFS_SOURCE="" -CONFIG_RD_GZIP=y -CONFIG_RD_BZIP2=y -CONFIG_RD_LZMA=y -CONFIG_RD_XZ=y -CONFIG_RD_LZO=y -CONFIG_RD_LZ4=y -CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y -# CONFIG_CC_OPTIMIZE_FOR_SIZE is not set -CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y -CONFIG_HAVE_UID16=y -CONFIG_SYSCTL_EXCEPTION_TRACE=y -CONFIG_HAVE_PCSPKR_PLATFORM=y -CONFIG_BPF=y -CONFIG_EXPERT=y -CONFIG_UID16=y -CONFIG_MULTIUSER=y -CONFIG_SGETMASK_SYSCALL=y -CONFIG_SYSFS_SYSCALL=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y -CONFIG_PRINTK=y -CONFIG_BUG=y -CONFIG_ELF_CORE=y -CONFIG_PCSPKR_PLATFORM=y -CONFIG_BASE_FULL=y -CONFIG_FUTEX=y -CONFIG_EPOLL=y -CONFIG_SIGNALFD=y -CONFIG_TIMERFD=y -CONFIG_EVENTFD=y -# CONFIG_BPF_SYSCALL is not set -CONFIG_SHMEM=y -CONFIG_AIO=y -CONFIG_ADVISE_SYSCALLS=y -CONFIG_USERFAULTFD=y -CONFIG_PCI_QUIRKS=y -CONFIG_MEMBARRIER=y -# CONFIG_EMBEDDED is not set -CONFIG_HAVE_PERF_EVENTS=y - -# -# Kernel Performance Events And Counters -# -CONFIG_PERF_EVENTS=y -# CONFIG_DEBUG_PERF_USE_VMALLOC is not set -CONFIG_VM_EVENT_COUNTERS=y -CONFIG_SLUB_DEBUG=y -# CONFIG_COMPAT_BRK is not set -# CONFIG_SLAB is not set -CONFIG_SLUB=y -# CONFIG_SLOB is not set -CONFIG_SLUB_CPU_PARTIAL=y -# CONFIG_SYSTEM_DATA_VERIFICATION is not set -CONFIG_PROFILING=y -CONFIG_TRACEPOINTS=y -CONFIG_OPROFILE=m -# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_OPROFILE_NMI_TIMER=y -# CONFIG_KPROBES is not set -# CONFIG_JUMP_LABEL is not set -# CONFIG_UPROBES is not set -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_USER_RETURN_NOTIFIER=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_KPROBES_ON_FTRACE=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y -CONFIG_HAVE_USER_RETURN_NOTIFIER=y -CONFIG_HAVE_PERF_EVENTS_NMI=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y -CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y -CONFIG_HAVE_CMPXCHG_LOCAL=y -CONFIG_HAVE_CMPXCHG_DOUBLE=y -CONFIG_ARCH_WANT_IPC_PARSE_VERSION=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_SECCOMP_FILTER=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_CC_STACKPROTECTOR=y -# CONFIG_CC_STACKPROTECTOR_NONE is not set -CONFIG_CC_STACKPROTECTOR_REGULAR=y -# CONFIG_CC_STACKPROTECTOR_STRONG is not set -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y -CONFIG_HAVE_ARCH_HUGE_VMAP=y -CONFIG_MODULES_USE_ELF_REL=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_CLONE_BACKWARDS=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_OLD_SIGACTION=y - -# -# GCOV-based kernel profiling -# -# CONFIG_GCOV_KERNEL is not set -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -CONFIG_HAVE_GENERIC_DMA_COHERENT=y -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_BLOCK=y -CONFIG_LBDAF=y -CONFIG_BLK_DEV_BSG=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_BLK_DEV_THROTTLING=y -# CONFIG_BLK_CMDLINE_PARSER is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -CONFIG_AIX_PARTITION=y -CONFIG_OSF_PARTITION=y -CONFIG_AMIGA_PARTITION=y -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -# CONFIG_LDM_PARTITION is not set -CONFIG_SGI_PARTITION=y -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_KARMA_PARTITION=y -CONFIG_EFI_PARTITION=y -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_CMDLINE_PARTITION is not set - -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_CFQ_GROUP_IOSCHED=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_PREEMPT_NOTIFIERS=y -CONFIG_PADATA=y -CONFIG_ASN1=m -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -CONFIG_INLINE_READ_UNLOCK=y -CONFIG_INLINE_READ_UNLOCK_IRQ=y -CONFIG_INLINE_WRITE_UNLOCK=y -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_ARCH_USE_QUEUED_RWLOCKS=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_FREEZER=y - -# -# Processor type and features -# -CONFIG_ZONE_DMA=y -CONFIG_SMP=y -CONFIG_X86_FEATURE_NAMES=y -CONFIG_X86_FAST_FEATURE_TESTS=y -CONFIG_X86_MPPARSE=y -CONFIG_X86_BIGSMP=y -CONFIG_RETPOLINE=y -# CONFIG_X86_EXTENDED_PLATFORM is not set -CONFIG_X86_INTEL_LPSS=y -CONFIG_X86_AMD_PLATFORM_DEVICE=y -CONFIG_IOSF_MBI=m -# CONFIG_IOSF_MBI_DEBUG is not set -CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y -CONFIG_X86_32_IRIS=m -CONFIG_SCHED_OMIT_FRAME_POINTER=y -CONFIG_HYPERVISOR_GUEST=y -CONFIG_PARAVIRT=y -# CONFIG_PARAVIRT_DEBUG is not set -CONFIG_PARAVIRT_SPINLOCKS=y -CONFIG_XEN=y -CONFIG_XEN_DOM0=y -CONFIG_XEN_PVHVM=y -CONFIG_XEN_SAVE_RESTORE=y -# CONFIG_XEN_DEBUG_FS is not set -CONFIG_KVM_GUEST=y -# CONFIG_KVM_DEBUG_FS is not set -# CONFIG_LGUEST_GUEST is not set -# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set -CONFIG_PARAVIRT_CLOCK=y -CONFIG_NO_BOOTMEM=y -# CONFIG_M486 is not set -# CONFIG_M586 is not set -# CONFIG_M586TSC is not set -# CONFIG_M586MMX is not set -# CONFIG_M686 is not set -# CONFIG_MPENTIUMII is not set -CONFIG_MPENTIUMIII=y -# CONFIG_MPENTIUMM is not set -# CONFIG_MPENTIUM4 is not set -# CONFIG_MK6 is not set -# CONFIG_MK7 is not set -# CONFIG_MK8 is not set -# CONFIG_MCRUSOE is not set -# CONFIG_MEFFICEON is not set -# CONFIG_MWINCHIPC6 is not set -# CONFIG_MWINCHIP3D is not set -# CONFIG_MELAN is not set -# CONFIG_MGEODEGX1 is not set -# CONFIG_MGEODE_LX is not set -# CONFIG_MCYRIXIII is not set -# CONFIG_MVIAC3_2 is not set -# CONFIG_MVIAC7 is not set -# CONFIG_MCORE2 is not set -# CONFIG_MATOM is not set -CONFIG_X86_GENERIC=y -CONFIG_X86_INTERNODE_CACHE_SHIFT=6 -CONFIG_X86_L1_CACHE_SHIFT=6 -CONFIG_X86_INTEL_USERCOPY=y -CONFIG_X86_USE_PPRO_CHECKSUM=y -CONFIG_X86_TSC=y -CONFIG_X86_CMPXCHG64=y -CONFIG_X86_CMOV=y -CONFIG_X86_MINIMUM_CPU_FAMILY=5 -CONFIG_X86_DEBUGCTLMSR=y -# CONFIG_PROCESSOR_SELECT is not set -CONFIG_CPU_SUP_INTEL=y -CONFIG_CPU_SUP_CYRIX_32=y -CONFIG_CPU_SUP_AMD=y -CONFIG_CPU_SUP_CENTAUR=y -CONFIG_CPU_SUP_TRANSMETA_32=y -CONFIG_CPU_SUP_UMC_32=y -CONFIG_HPET_TIMER=y -CONFIG_HPET_EMULATE_RTC=y -CONFIG_DMI=y -CONFIG_SWIOTLB=y -CONFIG_IOMMU_HELPER=y -CONFIG_NR_CPUS=32 -CONFIG_SCHED_SMT=y -CONFIG_SCHED_MC=y -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PREEMPT is not set -CONFIG_X86_LOCAL_APIC=y -CONFIG_X86_IO_APIC=y -CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y -CONFIG_X86_MCE=y -CONFIG_X86_MCE_INTEL=y -CONFIG_X86_MCE_AMD=y -CONFIG_X86_ANCIENT_MCE=y -CONFIG_X86_MCE_THRESHOLD=y -CONFIG_X86_MCE_INJECT=m -CONFIG_X86_THERMAL_VECTOR=y -# CONFIG_X86_LEGACY_VM86 is not set -# CONFIG_VM86 is not set -CONFIG_X86_16BIT=y -CONFIG_X86_ESPFIX32=y -CONFIG_TOSHIBA=m -CONFIG_I8K=m -CONFIG_X86_REBOOTFIXUPS=y -CONFIG_MICROCODE=y -CONFIG_MICROCODE_INTEL=y -CONFIG_MICROCODE_AMD=y -CONFIG_MICROCODE_OLD_INTERFACE=y -CONFIG_X86_MSR=y -CONFIG_X86_CPUID=y -# CONFIG_NOHIGHMEM is not set -# CONFIG_HIGHMEM4G is not set -CONFIG_HIGHMEM64G=y -CONFIG_VMSPLIT_3G=y -# CONFIG_VMSPLIT_2G is not set -# CONFIG_VMSPLIT_1G is not set -CONFIG_PAGE_OFFSET=0xC0000000 -CONFIG_HIGHMEM=y -CONFIG_X86_PAE=y -CONFIG_ARCH_PHYS_ADDR_T_64BIT=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y -CONFIG_NUMA=y -# CONFIG_NUMA_EMU is not set -CONFIG_NODES_SHIFT=3 -CONFIG_ARCH_HAVE_MEMORY_PRESENT=y -CONFIG_NEED_NODE_MEMMAP_SIZE=y -CONFIG_ARCH_DISCONTIGMEM_ENABLE=y -CONFIG_ARCH_DISCONTIGMEM_DEFAULT=y -CONFIG_ARCH_SPARSEMEM_ENABLE=y -CONFIG_ARCH_SELECT_MEMORY_MODEL=y -CONFIG_ILLEGAL_POINTER_VALUE=0 -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_DISCONTIGMEM_MANUAL=y -# CONFIG_SPARSEMEM_MANUAL is not set -CONFIG_DISCONTIGMEM=y -CONFIG_FLAT_NODE_MEM_MAP=y -CONFIG_NEED_MULTIPLE_NODES=y -CONFIG_HAVE_MEMORY_PRESENT=y -CONFIG_SPARSEMEM_STATIC=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y -# CONFIG_HAVE_BOOTMEM_INFO_NODE is not set -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y -CONFIG_MEMORY_BALLOON=y -CONFIG_BALLOON_COMPACTION=y -CONFIG_COMPACTION=y -CONFIG_MIGRATION=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_MMU_NOTIFIER=y -# CONFIG_KSM is not set -CONFIG_DEFAULT_MMAP_MIN_ADDR=98304 -CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y -# CONFIG_MEMORY_FAILURE is not set -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y -# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set -# CONFIG_CLEANCACHE is not set -# CONFIG_FRONTSWAP is not set -# CONFIG_CMA is not set -CONFIG_ZPOOL=m -# CONFIG_ZBUD is not set -CONFIG_ZSMALLOC=m -# CONFIG_PGTABLE_MAPPING is not set -# CONFIG_ZSMALLOC_STAT is not set -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y -# CONFIG_IDLE_PAGE_TRACKING is not set -CONFIG_FRAME_VECTOR=y -CONFIG_X86_PMEM_LEGACY_DEVICE=y -CONFIG_X86_PMEM_LEGACY=y -CONFIG_HIGHPTE=y -# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set -CONFIG_X86_RESERVE_LOW=64 -CONFIG_MATH_EMULATION=y -CONFIG_MTRR=y -CONFIG_MTRR_SANITIZER=y -CONFIG_MTRR_SANITIZER_ENABLE_DEFAULT=0 -CONFIG_MTRR_SANITIZER_SPARE_REG_NR_DEFAULT=1 -CONFIG_X86_PAT=y -CONFIG_ARCH_USES_PG_UNCACHED=y -CONFIG_ARCH_RANDOM=y -CONFIG_X86_SMAP=y -# CONFIG_X86_INTEL_MPX is not set -CONFIG_X86_INTEL_TSX_MODE_OFF=y -# CONFIG_X86_INTEL_TSX_MODE_ON is not set -# CONFIG_X86_INTEL_TSX_MODE_AUTO is not set -CONFIG_EFI=y -# CONFIG_EFI_STUB is not set -CONFIG_SECCOMP=y -# CONFIG_HZ_100 is not set -# CONFIG_HZ_250 is not set -# CONFIG_HZ_300 is not set -CONFIG_HZ_1000=y -CONFIG_HZ=1000 -CONFIG_SCHED_HRTICK=y -# CONFIG_KEXEC is not set -# CONFIG_CRASH_DUMP is not set -CONFIG_PHYSICAL_START=0x1000000 -# CONFIG_RELOCATABLE is not set -CONFIG_PHYSICAL_ALIGN=0x100000 -CONFIG_HOTPLUG_CPU=y -# CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set -# CONFIG_DEBUG_HOTPLUG_CPU0 is not set -# CONFIG_COMPAT_VDSO is not set -# CONFIG_CMDLINE_BOOL is not set -CONFIG_MODIFY_LDT_SYSCALL=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_USE_PERCPU_NUMA_NODE_ID=y - -# -# Power management and ACPI options -# -CONFIG_SUSPEND=y -CONFIG_SUSPEND_FREEZER=y -# CONFIG_SUSPEND_SKIP_SYNC is not set -CONFIG_HIBERNATE_CALLBACKS=y -CONFIG_HIBERNATION=y -CONFIG_PM_STD_PARTITION="\"\"" -CONFIG_PM_SLEEP=y -CONFIG_PM_SLEEP_SMP=y -# CONFIG_PM_AUTOSLEEP is not set -CONFIG_PM_WAKELOCKS=y -CONFIG_PM_WAKELOCKS_LIMIT=100 -CONFIG_PM_WAKELOCKS_GC=y -CONFIG_PM=y -# CONFIG_PM_DEBUG is not set -CONFIG_PM_CLK=y -# CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set -CONFIG_ACPI=y -CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y -CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y -CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y -# CONFIG_ACPI_DEBUGGER is not set -CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_PROCFS_POWER=y -CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y -CONFIG_ACPI_EC_DEBUGFS=m -CONFIG_ACPI_AC=m -CONFIG_ACPI_BATTERY=m -CONFIG_ACPI_BUTTON=m -CONFIG_ACPI_VIDEO=m -CONFIG_ACPI_FAN=m -CONFIG_ACPI_DOCK=y -CONFIG_ACPI_CPU_FREQ_PSS=y -CONFIG_ACPI_PROCESSOR_IDLE=y -CONFIG_ACPI_PROCESSOR=m -CONFIG_ACPI_IPMI=m -CONFIG_ACPI_HOTPLUG_CPU=y -CONFIG_ACPI_PROCESSOR_AGGREGATOR=m -CONFIG_ACPI_THERMAL=m -# CONFIG_ACPI_NUMA is not set -# CONFIG_ACPI_CUSTOM_DSDT is not set -CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y -# CONFIG_ACPI_DEBUG is not set -CONFIG_ACPI_PCI_SLOT=y -CONFIG_X86_PM_TIMER=y -CONFIG_ACPI_CONTAINER=y -CONFIG_ACPI_HOTPLUG_IOAPIC=y -CONFIG_ACPI_SBS=m -CONFIG_ACPI_HED=y -# CONFIG_ACPI_CUSTOM_METHOD is not set -CONFIG_ACPI_BGRT=y -# CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set -CONFIG_ACPI_NFIT=m -CONFIG_HAVE_ACPI_APEI=y -CONFIG_HAVE_ACPI_APEI_NMI=y -CONFIG_ACPI_APEI=y -CONFIG_ACPI_APEI_GHES=y -CONFIG_ACPI_APEI_PCIEAER=y -CONFIG_ACPI_APEI_EINJ=m -CONFIG_ACPI_APEI_ERST_DEBUG=m -CONFIG_ACPI_EXTLOG=m -CONFIG_PMIC_OPREGION=y -CONFIG_SFI=y -# CONFIG_APM is not set - -# -# CPU Frequency scaling -# -CONFIG_CPU_FREQ=y -CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=m -CONFIG_CPU_FREQ_STAT_DETAILS=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set -# CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set -CONFIG_CPU_FREQ_GOV_PERFORMANCE=y -CONFIG_CPU_FREQ_GOV_POWERSAVE=y -CONFIG_CPU_FREQ_GOV_USERSPACE=y -CONFIG_CPU_FREQ_GOV_ONDEMAND=y -CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y - -# -# CPU frequency scaling drivers -# -CONFIG_X86_INTEL_PSTATE=y -CONFIG_X86_PCC_CPUFREQ=m -CONFIG_X86_ACPI_CPUFREQ=m -CONFIG_X86_ACPI_CPUFREQ_CPB=y -CONFIG_X86_POWERNOW_K6=m -CONFIG_X86_POWERNOW_K7=m -CONFIG_X86_POWERNOW_K7_ACPI=y -CONFIG_X86_POWERNOW_K8=m -CONFIG_X86_AMD_FREQ_SENSITIVITY=m -CONFIG_X86_GX_SUSPMOD=m -CONFIG_X86_SPEEDSTEP_CENTRINO=m -CONFIG_X86_SPEEDSTEP_CENTRINO_TABLE=y -CONFIG_X86_SPEEDSTEP_ICH=m -CONFIG_X86_SPEEDSTEP_SMI=m -CONFIG_X86_P4_CLOCKMOD=m -CONFIG_X86_CPUFREQ_NFORCE2=m -CONFIG_X86_LONGRUN=m -CONFIG_X86_LONGHAUL=m -CONFIG_X86_E_POWERSAVER=m - -# -# shared options -# -CONFIG_X86_SPEEDSTEP_LIB=m -CONFIG_X86_SPEEDSTEP_RELAXED_CAP_CHECK=y - -# -# CPU Idle -# -CONFIG_CPU_IDLE=y -CONFIG_CPU_IDLE_GOV_LADDER=y -CONFIG_CPU_IDLE_GOV_MENU=y -# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set -CONFIG_INTEL_IDLE=y - -# -# Bus options (PCI etc.) -# -CONFIG_PCI=y -# CONFIG_PCI_GOBIOS is not set -# CONFIG_PCI_GOMMCONFIG is not set -# CONFIG_PCI_GODIRECT is not set -CONFIG_PCI_GOANY=y -CONFIG_PCI_BIOS=y -CONFIG_PCI_DIRECT=y -CONFIG_PCI_MMCONFIG=y -CONFIG_PCI_XEN=y -CONFIG_PCI_DOMAINS=y -# CONFIG_PCI_CNB20LE_QUIRK is not set -CONFIG_PCIEPORTBUS=y -CONFIG_HOTPLUG_PCI_PCIE=y -CONFIG_PCIEAER=y -# CONFIG_PCIE_ECRC is not set -CONFIG_PCIEAER_INJECT=m -CONFIG_PCIEASPM=y -# CONFIG_PCIEASPM_DEBUG is not set -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_PERFORMANCE is not set -CONFIG_PCIE_PME=y -CONFIG_PCI_BUS_ADDR_T_64BIT=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set -CONFIG_PCI_STUB=m -CONFIG_XEN_PCIDEV_FRONTEND=y -CONFIG_HT_IRQ=y -CONFIG_PCI_ATS=y -CONFIG_PCI_IOV=y -# CONFIG_PCI_PRI is not set -CONFIG_PCI_PASID=y -CONFIG_PCI_LABEL=y - -# -# PCI host controller drivers -# -CONFIG_ISA_DMA_API=y -CONFIG_ISA=y -# CONFIG_EISA is not set -CONFIG_SCx200=m -CONFIG_SCx200HR_TIMER=m -CONFIG_ALIX=y -# CONFIG_NET5501 is not set -# CONFIG_GEOS is not set -CONFIG_AMD_NB=y -CONFIG_PCCARD=m -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_CARDBUS=y - -# -# PC-card bridges -# -CONFIG_YENTA=m -CONFIG_YENTA_O2=y -CONFIG_YENTA_RICOH=y -CONFIG_YENTA_TI=y -CONFIG_YENTA_ENE_TUNE=y -CONFIG_YENTA_TOSHIBA=y -CONFIG_PD6729=m -CONFIG_I82092=m -CONFIG_I82365=m -CONFIG_TCIC=m -CONFIG_PCMCIA_PROBE=y -CONFIG_PCCARD_NONSTATIC=y -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_COMPAQ=m -# CONFIG_HOTPLUG_PCI_COMPAQ_NVRAM is not set -CONFIG_HOTPLUG_PCI_IBM=m -CONFIG_HOTPLUG_PCI_ACPI=y -CONFIG_HOTPLUG_PCI_ACPI_IBM=m -# CONFIG_HOTPLUG_PCI_CPCI is not set -CONFIG_HOTPLUG_PCI_SHPC=m -# CONFIG_RAPIDIO is not set -# CONFIG_X86_SYSFB is not set - -# -# Executable file formats / Emulations -# -CONFIG_BINFMT_ELF=y -# CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set -CONFIG_BINFMT_SCRIPT=y -CONFIG_HAVE_AOUT=y -CONFIG_BINFMT_AOUT=m -CONFIG_BINFMT_MISC=m -CONFIG_COREDUMP=y -CONFIG_HAVE_ATOMIC_IOMAP=y -CONFIG_PMC_ATOM=y -CONFIG_NET=y -CONFIG_NET_INGRESS=y - -# -# Networking options -# -CONFIG_PACKET=y -CONFIG_PACKET_DIAG=m -CONFIG_UNIX=y -CONFIG_UNIX_DIAG=m -CONFIG_XFRM=y -CONFIG_XFRM_ALGO=y -CONFIG_XFRM_USER=y -# CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set -# CONFIG_XFRM_STATISTICS is not set -CONFIG_XFRM_IPCOMP=m -CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set -CONFIG_INET=y -CONFIG_IP_MULTICAST=y -CONFIG_IP_ADVANCED_ROUTER=y -# CONFIG_IP_FIB_TRIE_STATS is not set -CONFIG_IP_MULTIPLE_TABLES=y -CONFIG_IP_ROUTE_MULTIPATH=y -CONFIG_IP_ROUTE_VERBOSE=y -CONFIG_IP_ROUTE_CLASSID=y -# CONFIG_IP_PNP is not set -CONFIG_NET_IPIP=m -CONFIG_NET_IPGRE_DEMUX=m -CONFIG_NET_IP_TUNNEL=m -CONFIG_NET_IPGRE=m -CONFIG_NET_IPGRE_BROADCAST=y -CONFIG_IP_MROUTE=y -CONFIG_IP_MROUTE_MULTIPLE_TABLES=y -CONFIG_IP_PIMSM_V1=y -CONFIG_IP_PIMSM_V2=y -CONFIG_SYN_COOKIES=y -CONFIG_NET_IPVTI=m -CONFIG_NET_UDP_TUNNEL=m -CONFIG_NET_FOU=m -CONFIG_NET_FOU_IP_TUNNELS=y -CONFIG_INET_AH=m -CONFIG_INET_ESP=m -CONFIG_INET_IPCOMP=m -CONFIG_INET_XFRM_TUNNEL=m -CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_LRO=y -CONFIG_INET_DIAG=m -CONFIG_INET_TCP_DIAG=m -CONFIG_INET_UDP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set -CONFIG_TCP_CONG_CUBIC=y -CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set -CONFIG_IPV6=m -# CONFIG_IPV6_ROUTER_PREF is not set -# CONFIG_IPV6_OPTIMISTIC_DAD is not set -CONFIG_INET6_AH=m -CONFIG_INET6_ESP=m -CONFIG_INET6_IPCOMP=m -CONFIG_IPV6_MIP6=m -CONFIG_IPV6_ILA=m -CONFIG_INET6_XFRM_TUNNEL=m -CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m -CONFIG_IPV6_VTI=m -CONFIG_IPV6_SIT=m -# CONFIG_IPV6_SIT_6RD is not set -CONFIG_IPV6_NDISC_NODETYPE=y -CONFIG_IPV6_TUNNEL=m -CONFIG_IPV6_GRE=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set -# CONFIG_IPV6_MROUTE is not set -# CONFIG_NETLABEL is not set -# CONFIG_NETWORK_SECMARK is not set -CONFIG_NET_PTP_CLASSIFY=y -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set -CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set -CONFIG_NETFILTER_ADVANCED=y -CONFIG_BRIDGE_NETFILTER=m - -# -# Core Netfilter Configuration -# -CONFIG_NETFILTER_INGRESS=y -CONFIG_NETFILTER_NETLINK=m -CONFIG_NETFILTER_NETLINK_ACCT=m -CONFIG_NETFILTER_NETLINK_QUEUE=m -CONFIG_NETFILTER_NETLINK_LOG=m -CONFIG_NF_CONNTRACK=m -CONFIG_NF_LOG_COMMON=m -CONFIG_NF_CONNTRACK_MARK=y -CONFIG_NF_CONNTRACK_ZONES=y -# CONFIG_NF_CONNTRACK_PROCFS is not set -# CONFIG_NF_CONNTRACK_EVENTS is not set -# CONFIG_NF_CONNTRACK_TIMEOUT is not set -# CONFIG_NF_CONNTRACK_TIMESTAMP is not set -CONFIG_NF_CONNTRACK_LABELS=y -CONFIG_NF_CT_PROTO_DCCP=m -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CT_PROTO_UDPLITE=m -CONFIG_NF_CONNTRACK_AMANDA=m -CONFIG_NF_CONNTRACK_FTP=m -CONFIG_NF_CONNTRACK_H323=m -CONFIG_NF_CONNTRACK_IRC=m -CONFIG_NF_CONNTRACK_BROADCAST=m -CONFIG_NF_CONNTRACK_NETBIOS_NS=m -CONFIG_NF_CONNTRACK_SNMP=m -CONFIG_NF_CONNTRACK_PPTP=m -CONFIG_NF_CONNTRACK_SANE=m -CONFIG_NF_CONNTRACK_SIP=m -CONFIG_NF_CONNTRACK_TFTP=m -CONFIG_NF_CT_NETLINK=m -CONFIG_NF_CT_NETLINK_TIMEOUT=m -# CONFIG_NETFILTER_NETLINK_GLUE_CT is not set -CONFIG_NF_NAT=m -CONFIG_NF_NAT_NEEDED=y -CONFIG_NF_NAT_PROTO_DCCP=m -CONFIG_NF_NAT_PROTO_UDPLITE=m -CONFIG_NF_NAT_PROTO_SCTP=m -CONFIG_NF_NAT_AMANDA=m -CONFIG_NF_NAT_FTP=m -CONFIG_NF_NAT_IRC=m -CONFIG_NF_NAT_SIP=m -CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_REDIRECT=m -CONFIG_NETFILTER_SYNPROXY=m -CONFIG_NF_TABLES=m -CONFIG_NF_TABLES_INET=m -CONFIG_NF_TABLES_NETDEV=m -CONFIG_NFT_EXTHDR=m -CONFIG_NFT_META=m -CONFIG_NFT_CT=m -CONFIG_NFT_RBTREE=m -CONFIG_NFT_HASH=m -CONFIG_NFT_COUNTER=m -CONFIG_NFT_LOG=m -CONFIG_NFT_LIMIT=m -CONFIG_NFT_MASQ=m -CONFIG_NFT_REDIR=m -CONFIG_NFT_NAT=m -CONFIG_NFT_QUEUE=m -CONFIG_NFT_REJECT=m -CONFIG_NFT_REJECT_INET=m -CONFIG_NFT_COMPAT=m -CONFIG_NETFILTER_XTABLES=m - -# -# Xtables combined modules -# -CONFIG_NETFILTER_XT_MARK=m -CONFIG_NETFILTER_XT_CONNMARK=m -CONFIG_NETFILTER_XT_SET=m - -# -# Xtables targets -# -CONFIG_NETFILTER_XT_TARGET_AUDIT=m -CONFIG_NETFILTER_XT_TARGET_CHECKSUM=m -CONFIG_NETFILTER_XT_TARGET_CLASSIFY=m -CONFIG_NETFILTER_XT_TARGET_CONNMARK=m -CONFIG_NETFILTER_XT_TARGET_CT=m -CONFIG_NETFILTER_XT_TARGET_DSCP=m -CONFIG_NETFILTER_XT_TARGET_HL=m -CONFIG_NETFILTER_XT_TARGET_HMARK=m -CONFIG_NETFILTER_XT_TARGET_IDLETIMER=m -CONFIG_NETFILTER_XT_TARGET_LED=m -CONFIG_NETFILTER_XT_TARGET_LOG=m -CONFIG_NETFILTER_XT_TARGET_MARK=m -CONFIG_NETFILTER_XT_NAT=m -CONFIG_NETFILTER_XT_TARGET_NETMAP=m -CONFIG_NETFILTER_XT_TARGET_NFLOG=m -CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m -CONFIG_NETFILTER_XT_TARGET_NOTRACK=m -CONFIG_NETFILTER_XT_TARGET_RATEEST=m -CONFIG_NETFILTER_XT_TARGET_REDIRECT=m -CONFIG_NETFILTER_XT_TARGET_TEE=m -CONFIG_NETFILTER_XT_TARGET_TPROXY=m -CONFIG_NETFILTER_XT_TARGET_TRACE=m -CONFIG_NETFILTER_XT_TARGET_TCPMSS=m -CONFIG_NETFILTER_XT_TARGET_TCPOPTSTRIP=m - -# -# Xtables matches -# -CONFIG_NETFILTER_XT_MATCH_ADDRTYPE=m -CONFIG_NETFILTER_XT_MATCH_BPF=m -CONFIG_NETFILTER_XT_MATCH_CGROUP=m -CONFIG_NETFILTER_XT_MATCH_CLUSTER=m -CONFIG_NETFILTER_XT_MATCH_COMMENT=m -CONFIG_NETFILTER_XT_MATCH_CONNBYTES=m -CONFIG_NETFILTER_XT_MATCH_CONNLABEL=m -CONFIG_NETFILTER_XT_MATCH_CONNLIMIT=m -CONFIG_NETFILTER_XT_MATCH_CONNMARK=m -CONFIG_NETFILTER_XT_MATCH_CONNTRACK=m -CONFIG_NETFILTER_XT_MATCH_CPU=m -CONFIG_NETFILTER_XT_MATCH_DCCP=m -CONFIG_NETFILTER_XT_MATCH_DEVGROUP=m -CONFIG_NETFILTER_XT_MATCH_DSCP=m -CONFIG_NETFILTER_XT_MATCH_ECN=m -CONFIG_NETFILTER_XT_MATCH_ESP=m -CONFIG_NETFILTER_XT_MATCH_HASHLIMIT=m -CONFIG_NETFILTER_XT_MATCH_HELPER=m -CONFIG_NETFILTER_XT_MATCH_HL=m -CONFIG_NETFILTER_XT_MATCH_IPCOMP=m -CONFIG_NETFILTER_XT_MATCH_IPRANGE=m -CONFIG_NETFILTER_XT_MATCH_IPVS=m -CONFIG_NETFILTER_XT_MATCH_L2TP=m -CONFIG_NETFILTER_XT_MATCH_LENGTH=m -CONFIG_NETFILTER_XT_MATCH_LIMIT=m -CONFIG_NETFILTER_XT_MATCH_MAC=m -CONFIG_NETFILTER_XT_MATCH_MARK=m -CONFIG_NETFILTER_XT_MATCH_MULTIPORT=m -CONFIG_NETFILTER_XT_MATCH_NFACCT=m -CONFIG_NETFILTER_XT_MATCH_OSF=m -CONFIG_NETFILTER_XT_MATCH_OWNER=m -CONFIG_NETFILTER_XT_MATCH_POLICY=m -CONFIG_NETFILTER_XT_MATCH_PHYSDEV=m -CONFIG_NETFILTER_XT_MATCH_PKTTYPE=m -CONFIG_NETFILTER_XT_MATCH_QUOTA=m -CONFIG_NETFILTER_XT_MATCH_RATEEST=m -CONFIG_NETFILTER_XT_MATCH_REALM=m -CONFIG_NETFILTER_XT_MATCH_RECENT=m -CONFIG_NETFILTER_XT_MATCH_SCTP=m -CONFIG_NETFILTER_XT_MATCH_SOCKET=m -CONFIG_NETFILTER_XT_MATCH_STATE=m -CONFIG_NETFILTER_XT_MATCH_STATISTIC=m -CONFIG_NETFILTER_XT_MATCH_STRING=m -CONFIG_NETFILTER_XT_MATCH_TCPMSS=m -CONFIG_NETFILTER_XT_MATCH_TIME=m -CONFIG_NETFILTER_XT_MATCH_U32=m -CONFIG_IP_SET=m -CONFIG_IP_SET_MAX=256 -CONFIG_IP_SET_BITMAP_IP=m -CONFIG_IP_SET_BITMAP_IPMAC=m -CONFIG_IP_SET_BITMAP_PORT=m -CONFIG_IP_SET_HASH_IP=m -CONFIG_IP_SET_HASH_IPMARK=m -CONFIG_IP_SET_HASH_IPPORT=m -CONFIG_IP_SET_HASH_IPPORTIP=m -CONFIG_IP_SET_HASH_IPPORTNET=m -CONFIG_IP_SET_HASH_MAC=m -CONFIG_IP_SET_HASH_NETPORTNET=m -CONFIG_IP_SET_HASH_NET=m -CONFIG_IP_SET_HASH_NETNET=m -CONFIG_IP_SET_HASH_NETPORT=m -CONFIG_IP_SET_HASH_NETIFACE=m -CONFIG_IP_SET_LIST_SET=m -CONFIG_IP_VS=m -# CONFIG_IP_VS_IPV6 is not set -# CONFIG_IP_VS_DEBUG is not set -CONFIG_IP_VS_TAB_BITS=12 - -# -# IPVS transport protocol load balancing support -# -CONFIG_IP_VS_PROTO_TCP=y -CONFIG_IP_VS_PROTO_UDP=y -CONFIG_IP_VS_PROTO_AH_ESP=y -CONFIG_IP_VS_PROTO_ESP=y -CONFIG_IP_VS_PROTO_AH=y -CONFIG_IP_VS_PROTO_SCTP=y - -# -# IPVS scheduler -# -CONFIG_IP_VS_RR=m -CONFIG_IP_VS_WRR=m -CONFIG_IP_VS_LC=m -CONFIG_IP_VS_WLC=m -CONFIG_IP_VS_FO=m -CONFIG_IP_VS_OVF=m -CONFIG_IP_VS_LBLC=m -CONFIG_IP_VS_LBLCR=m -CONFIG_IP_VS_DH=m -CONFIG_IP_VS_SH=m -CONFIG_IP_VS_SED=m -CONFIG_IP_VS_NQ=m - -# -# IPVS SH scheduler -# -CONFIG_IP_VS_SH_TAB_BITS=8 - -# -# IPVS application helper -# -CONFIG_IP_VS_FTP=m -CONFIG_IP_VS_NFCT=y -CONFIG_IP_VS_PE_SIP=m - -# -# IP: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV4=m -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_TABLES_IPV4=m -CONFIG_NFT_CHAIN_ROUTE_IPV4=m -CONFIG_NFT_REJECT_IPV4=m -CONFIG_NFT_DUP_IPV4=m -CONFIG_NF_TABLES_ARP=m -CONFIG_NF_DUP_IPV4=m -CONFIG_NF_LOG_ARP=m -CONFIG_NF_LOG_IPV4=m -CONFIG_NF_REJECT_IPV4=m -CONFIG_NF_NAT_IPV4=m -CONFIG_NFT_CHAIN_NAT_IPV4=m -CONFIG_NF_NAT_MASQUERADE_IPV4=m -CONFIG_NFT_MASQ_IPV4=m -CONFIG_NFT_REDIR_IPV4=m -CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PROTO_GRE=m -CONFIG_NF_NAT_PPTP=m -CONFIG_NF_NAT_H323=m -CONFIG_IP_NF_IPTABLES=m -CONFIG_IP_NF_MATCH_AH=m -CONFIG_IP_NF_MATCH_ECN=m -CONFIG_IP_NF_MATCH_RPFILTER=m -CONFIG_IP_NF_MATCH_TTL=m -CONFIG_IP_NF_FILTER=m -CONFIG_IP_NF_TARGET_REJECT=m -CONFIG_IP_NF_TARGET_SYNPROXY=m -CONFIG_IP_NF_NAT=m -CONFIG_IP_NF_TARGET_MASQUERADE=m -CONFIG_IP_NF_TARGET_NETMAP=m -CONFIG_IP_NF_TARGET_REDIRECT=m -CONFIG_IP_NF_MANGLE=m -CONFIG_IP_NF_TARGET_CLUSTERIP=m -CONFIG_IP_NF_TARGET_ECN=m -CONFIG_IP_NF_TARGET_TTL=m -CONFIG_IP_NF_RAW=m -CONFIG_IP_NF_SECURITY=m -CONFIG_IP_NF_ARPTABLES=m -CONFIG_IP_NF_ARPFILTER=m -CONFIG_IP_NF_ARP_MANGLE=m - -# -# IPv6: Netfilter Configuration -# -CONFIG_NF_DEFRAG_IPV6=m -CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_NF_TABLES_IPV6=m -CONFIG_NFT_CHAIN_ROUTE_IPV6=m -CONFIG_NFT_REJECT_IPV6=m -CONFIG_NFT_DUP_IPV6=m -CONFIG_NF_DUP_IPV6=m -CONFIG_NF_REJECT_IPV6=m -CONFIG_NF_LOG_IPV6=m -CONFIG_NF_NAT_IPV6=m -CONFIG_NFT_CHAIN_NAT_IPV6=m -CONFIG_NF_NAT_MASQUERADE_IPV6=m -CONFIG_NFT_MASQ_IPV6=m -CONFIG_NFT_REDIR_IPV6=m -CONFIG_IP6_NF_IPTABLES=m -CONFIG_IP6_NF_MATCH_AH=m -CONFIG_IP6_NF_MATCH_EUI64=m -CONFIG_IP6_NF_MATCH_FRAG=m -CONFIG_IP6_NF_MATCH_OPTS=m -CONFIG_IP6_NF_MATCH_HL=m -CONFIG_IP6_NF_MATCH_IPV6HEADER=m -CONFIG_IP6_NF_MATCH_MH=m -CONFIG_IP6_NF_MATCH_RPFILTER=m -CONFIG_IP6_NF_MATCH_RT=m -CONFIG_IP6_NF_TARGET_HL=m -CONFIG_IP6_NF_FILTER=m -CONFIG_IP6_NF_TARGET_REJECT=m -CONFIG_IP6_NF_TARGET_SYNPROXY=m -CONFIG_IP6_NF_MANGLE=m -CONFIG_IP6_NF_RAW=m -CONFIG_IP6_NF_SECURITY=m -CONFIG_IP6_NF_NAT=m -CONFIG_IP6_NF_TARGET_MASQUERADE=m -CONFIG_IP6_NF_TARGET_NPT=m - -# -# DECnet: Netfilter Configuration -# -# CONFIG_DECNET_NF_GRABULATOR is not set -CONFIG_NF_TABLES_BRIDGE=m -CONFIG_NFT_BRIDGE_META=m -CONFIG_NFT_BRIDGE_REJECT=m -CONFIG_NF_LOG_BRIDGE=m -CONFIG_BRIDGE_NF_EBTABLES=m -CONFIG_BRIDGE_EBT_BROUTE=m -CONFIG_BRIDGE_EBT_T_FILTER=m -CONFIG_BRIDGE_EBT_T_NAT=m -CONFIG_BRIDGE_EBT_802_3=m -CONFIG_BRIDGE_EBT_AMONG=m -CONFIG_BRIDGE_EBT_ARP=m -CONFIG_BRIDGE_EBT_IP=m -CONFIG_BRIDGE_EBT_IP6=m -CONFIG_BRIDGE_EBT_LIMIT=m -CONFIG_BRIDGE_EBT_MARK=m -CONFIG_BRIDGE_EBT_PKTTYPE=m -CONFIG_BRIDGE_EBT_STP=m -CONFIG_BRIDGE_EBT_VLAN=m -CONFIG_BRIDGE_EBT_ARPREPLY=m -CONFIG_BRIDGE_EBT_DNAT=m -CONFIG_BRIDGE_EBT_MARK_T=m -CONFIG_BRIDGE_EBT_REDIRECT=m -CONFIG_BRIDGE_EBT_SNAT=m -CONFIG_BRIDGE_EBT_LOG=m -CONFIG_BRIDGE_EBT_NFLOG=m -CONFIG_IP_DCCP=m -CONFIG_INET_DCCP_DIAG=m - -# -# DCCP CCIDs Configuration -# -# CONFIG_IP_DCCP_CCID2_DEBUG is not set -# CONFIG_IP_DCCP_CCID3 is not set - -# -# DCCP Kernel Hacking -# -# CONFIG_IP_DCCP_DEBUG is not set -CONFIG_IP_SCTP=m -# CONFIG_SCTP_DBG_OBJCNT is not set -CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_SHA1 is not set -# CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set -CONFIG_SCTP_COOKIE_HMAC_MD5=y -CONFIG_SCTP_COOKIE_HMAC_SHA1=y -CONFIG_RDS=m -CONFIG_RDS_RDMA=m -CONFIG_RDS_TCP=m -# CONFIG_RDS_DEBUG is not set -CONFIG_TIPC=m -CONFIG_TIPC_MEDIA_IB=y -CONFIG_TIPC_MEDIA_UDP=y -CONFIG_ATM=m -CONFIG_ATM_CLIP=m -# CONFIG_ATM_CLIP_NO_ICMP is not set -CONFIG_ATM_LANE=m -CONFIG_ATM_MPOA=m -CONFIG_ATM_BR2684=m -# CONFIG_ATM_BR2684_IPFILTER is not set -CONFIG_L2TP=m -CONFIG_L2TP_DEBUGFS=m -CONFIG_L2TP_V3=y -CONFIG_L2TP_IP=m -CONFIG_L2TP_ETH=m -CONFIG_STP=m -CONFIG_GARP=m -CONFIG_BRIDGE=m -CONFIG_BRIDGE_IGMP_SNOOPING=y -CONFIG_BRIDGE_VLAN_FILTERING=y -CONFIG_HAVE_NET_DSA=y -CONFIG_NET_DSA=m -CONFIG_NET_DSA_HWMON=y -CONFIG_NET_DSA_TAG_BRCM=y -CONFIG_NET_DSA_TAG_DSA=y -CONFIG_NET_DSA_TAG_EDSA=y -CONFIG_NET_DSA_TAG_TRAILER=y -CONFIG_VLAN_8021Q=m -CONFIG_VLAN_8021Q_GVRP=y -# CONFIG_VLAN_8021Q_MVRP is not set -CONFIG_DECNET=m -# CONFIG_DECNET_ROUTER is not set -CONFIG_LLC=m -CONFIG_LLC2=m -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set -CONFIG_ATALK=m -CONFIG_DEV_APPLETALK=m -CONFIG_LTPC=m -CONFIG_COPS=m -CONFIG_COPS_DAYNA=y -CONFIG_COPS_TANGENT=y -CONFIG_IPDDP=m -CONFIG_IPDDP_ENCAP=y -# CONFIG_X25 is not set -# CONFIG_LAPB is not set -# CONFIG_PHONET is not set -CONFIG_6LOWPAN=m -CONFIG_6LOWPAN_NHC=m -CONFIG_6LOWPAN_NHC_DEST=m -CONFIG_6LOWPAN_NHC_FRAGMENT=m -CONFIG_6LOWPAN_NHC_HOP=m -CONFIG_6LOWPAN_NHC_IPV6=m -CONFIG_6LOWPAN_NHC_MOBILITY=m -CONFIG_6LOWPAN_NHC_ROUTING=m -CONFIG_6LOWPAN_NHC_UDP=m -CONFIG_IEEE802154=m -# CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set -CONFIG_IEEE802154_SOCKET=m -CONFIG_IEEE802154_6LOWPAN=m -CONFIG_MAC802154=m -CONFIG_NET_SCHED=y - -# -# Queueing/Scheduling -# -CONFIG_NET_SCH_CBQ=m -CONFIG_NET_SCH_HTB=m -CONFIG_NET_SCH_HFSC=m -CONFIG_NET_SCH_ATM=m -CONFIG_NET_SCH_PRIO=m -CONFIG_NET_SCH_MULTIQ=m -CONFIG_NET_SCH_RED=m -CONFIG_NET_SCH_SFB=m -CONFIG_NET_SCH_SFQ=m -CONFIG_NET_SCH_TEQL=m -CONFIG_NET_SCH_TBF=m -CONFIG_NET_SCH_GRED=m -CONFIG_NET_SCH_DSMARK=m -CONFIG_NET_SCH_NETEM=m -CONFIG_NET_SCH_DRR=m -CONFIG_NET_SCH_MQPRIO=m -CONFIG_NET_SCH_CHOKE=m -CONFIG_NET_SCH_QFQ=m -CONFIG_NET_SCH_CODEL=m -CONFIG_NET_SCH_FQ_CODEL=m -CONFIG_NET_SCH_FQ=m -CONFIG_NET_SCH_HHF=m -CONFIG_NET_SCH_PIE=m -CONFIG_NET_SCH_INGRESS=m -CONFIG_NET_SCH_PLUG=m - -# -# Classification -# -CONFIG_NET_CLS=y -CONFIG_NET_CLS_BASIC=m -CONFIG_NET_CLS_TCINDEX=m -CONFIG_NET_CLS_ROUTE4=m -CONFIG_NET_CLS_FW=m -CONFIG_NET_CLS_U32=m -# CONFIG_CLS_U32_PERF is not set -CONFIG_CLS_U32_MARK=y -CONFIG_NET_CLS_RSVP=m -CONFIG_NET_CLS_RSVP6=m -CONFIG_NET_CLS_FLOW=m -CONFIG_NET_CLS_CGROUP=y -CONFIG_NET_CLS_BPF=m -CONFIG_NET_CLS_FLOWER=m -CONFIG_NET_EMATCH=y -CONFIG_NET_EMATCH_STACK=32 -CONFIG_NET_EMATCH_CMP=m -CONFIG_NET_EMATCH_NBYTE=m -CONFIG_NET_EMATCH_U32=m -CONFIG_NET_EMATCH_META=m -CONFIG_NET_EMATCH_TEXT=m -CONFIG_NET_EMATCH_CANID=m -CONFIG_NET_EMATCH_IPSET=m -CONFIG_NET_CLS_ACT=y -CONFIG_NET_ACT_POLICE=y -CONFIG_NET_ACT_GACT=m -CONFIG_GACT_PROB=y -CONFIG_NET_ACT_MIRRED=m -CONFIG_NET_ACT_IPT=m -CONFIG_NET_ACT_NAT=m -CONFIG_NET_ACT_PEDIT=m -CONFIG_NET_ACT_SIMP=m -CONFIG_NET_ACT_SKBEDIT=m -CONFIG_NET_ACT_CSUM=m -CONFIG_NET_ACT_VLAN=m -CONFIG_NET_ACT_BPF=m -CONFIG_NET_ACT_CONNMARK=m -# CONFIG_NET_CLS_IND is not set -CONFIG_NET_SCH_FIFO=y -# CONFIG_DCB is not set -CONFIG_DNS_RESOLVER=y -CONFIG_BATMAN_ADV=m -CONFIG_BATMAN_ADV_BLA=y -CONFIG_BATMAN_ADV_DAT=y -CONFIG_BATMAN_ADV_NC=y -CONFIG_BATMAN_ADV_MCAST=y -# CONFIG_BATMAN_ADV_DEBUG is not set -CONFIG_OPENVSWITCH=m -CONFIG_OPENVSWITCH_GRE=m -CONFIG_OPENVSWITCH_VXLAN=m -CONFIG_OPENVSWITCH_GENEVE=m -CONFIG_VSOCKETS=m -CONFIG_VMWARE_VMCI_VSOCKETS=m -CONFIG_NETLINK_DIAG=m -CONFIG_MPLS=y -CONFIG_NET_MPLS_GSO=m -CONFIG_MPLS_ROUTING=m -CONFIG_MPLS_IPTUNNEL=m -CONFIG_HSR=m -CONFIG_NET_SWITCHDEV=y -# CONFIG_NET_L3_MASTER_DEV is not set -CONFIG_RPS=y -CONFIG_RFS_ACCEL=y -CONFIG_XPS=y -CONFIG_CGROUP_NET_PRIO=y -CONFIG_CGROUP_NET_CLASSID=y -CONFIG_NET_RX_BUSY_POLL=y -CONFIG_BQL=y -CONFIG_NET_FLOW_LIMIT=y - -# -# Network testing -# -# CONFIG_NET_PKTGEN is not set -# CONFIG_NET_DROP_MONITOR is not set -CONFIG_HAMRADIO=y - -# -# Packet Radio protocols -# -CONFIG_AX25=m -# CONFIG_AX25_DAMA_SLAVE is not set -CONFIG_NETROM=m -CONFIG_ROSE=m - -# -# AX.25 network device drivers -# -CONFIG_MKISS=m -CONFIG_6PACK=m -CONFIG_BPQETHER=m -CONFIG_SCC=m -CONFIG_SCC_DELAY=y -CONFIG_SCC_TRXECHO=y -CONFIG_BAYCOM_SER_FDX=m -CONFIG_BAYCOM_SER_HDX=m -CONFIG_BAYCOM_PAR=m -CONFIG_BAYCOM_EPP=m -CONFIG_YAM=m -CONFIG_CAN=m -CONFIG_CAN_RAW=m -CONFIG_CAN_BCM=m -CONFIG_CAN_GW=m - -# -# CAN Device Drivers -# -CONFIG_CAN_VCAN=m -CONFIG_CAN_SLCAN=m -CONFIG_CAN_DEV=m -CONFIG_CAN_CALC_BITTIMING=y -# CONFIG_CAN_LEDS is not set -CONFIG_CAN_JANZ_ICAN3=m -CONFIG_PCH_CAN=m -CONFIG_CAN_SJA1000=m -CONFIG_CAN_SJA1000_ISA=m -CONFIG_CAN_SJA1000_PLATFORM=m -CONFIG_CAN_EMS_PCMCIA=m -CONFIG_CAN_EMS_PCI=m -CONFIG_CAN_PEAK_PCMCIA=m -CONFIG_CAN_PEAK_PCI=m -CONFIG_CAN_PEAK_PCIEC=y -CONFIG_CAN_KVASER_PCI=m -CONFIG_CAN_PLX_PCI=m -CONFIG_CAN_TSCAN1=m -CONFIG_CAN_C_CAN=m -CONFIG_CAN_C_CAN_PLATFORM=m -CONFIG_CAN_C_CAN_PCI=m -CONFIG_CAN_M_CAN=m -CONFIG_CAN_CC770=m -CONFIG_CAN_CC770_ISA=m -CONFIG_CAN_CC770_PLATFORM=m - -# -# CAN USB interfaces -# -CONFIG_CAN_EMS_USB=m -CONFIG_CAN_ESD_USB2=m -CONFIG_CAN_GS_USB=m -CONFIG_CAN_KVASER_USB=m -CONFIG_CAN_PEAK_USB=m -CONFIG_CAN_8DEV_USB=m -CONFIG_CAN_SOFTING=m -CONFIG_CAN_SOFTING_CS=m -# CONFIG_CAN_DEBUG_DEVICES is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m - -# -# Dongle support -# -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_TOIM3232_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_KINGSUN_DONGLE=m -CONFIG_KSDAZZLE_DONGLE=m -CONFIG_KS959_DONGLE=m - -# -# FIR device drivers -# -CONFIG_USB_IRDA=m -CONFIG_SIGMATEL_FIR=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -CONFIG_TOSHIBA_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m -CONFIG_VIA_FIR=m -CONFIG_MCS_FIR=m -CONFIG_BT=m -CONFIG_BT_BREDR=y -CONFIG_BT_RFCOMM=m -CONFIG_BT_RFCOMM_TTY=y -CONFIG_BT_BNEP=m -CONFIG_BT_BNEP_MC_FILTER=y -CONFIG_BT_BNEP_PROTO_FILTER=y -CONFIG_BT_CMTP=m -CONFIG_BT_HIDP=m -CONFIG_BT_HS=y -CONFIG_BT_LE=y -CONFIG_BT_6LOWPAN=m -# CONFIG_BT_SELFTEST is not set -# CONFIG_BT_DEBUGFS is not set - -# -# Bluetooth device drivers -# -CONFIG_BT_INTEL=m -CONFIG_BT_BCM=m -CONFIG_BT_RTL=m -CONFIG_BT_QCA=m -CONFIG_BT_HCIBTUSB=m -CONFIG_BT_HCIBTUSB_BCM=y -CONFIG_BT_HCIBTUSB_RTL=y -CONFIG_BT_HCIBTSDIO=m -CONFIG_BT_HCIUART=m -CONFIG_BT_HCIUART_H4=y -CONFIG_BT_HCIUART_BCSP=y -CONFIG_BT_HCIUART_ATH3K=y -CONFIG_BT_HCIUART_LL=y -CONFIG_BT_HCIUART_3WIRE=y -CONFIG_BT_HCIUART_INTEL=y -CONFIG_BT_HCIUART_BCM=y -CONFIG_BT_HCIUART_QCA=y -CONFIG_BT_HCIBCM203X=m -CONFIG_BT_HCIBPA10X=m -CONFIG_BT_HCIBFUSB=m -CONFIG_BT_HCIDTL1=m -CONFIG_BT_HCIBT3C=m -CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m -CONFIG_BT_HCIVHCI=m -CONFIG_BT_MRVL=m -CONFIG_BT_MRVL_SDIO=m -CONFIG_BT_ATH3K=m -CONFIG_BT_WILINK=m -CONFIG_AF_RXRPC=m -# CONFIG_AF_RXRPC_DEBUG is not set -CONFIG_RXKAD=m -CONFIG_FIB_RULES=y -CONFIG_WIRELESS=y -CONFIG_WIRELESS_EXT=y -CONFIG_WEXT_CORE=y -CONFIG_WEXT_PROC=y -CONFIG_WEXT_SPY=y -CONFIG_WEXT_PRIV=y -CONFIG_CFG80211=m -# CONFIG_NL80211_TESTMODE is not set -# CONFIG_CFG80211_DEVELOPER_WARNINGS is not set -# CONFIG_CFG80211_REG_DEBUG is not set -# CONFIG_CFG80211_CERTIFICATION_ONUS is not set -CONFIG_CFG80211_DEFAULT_PS=y -# CONFIG_CFG80211_DEBUGFS is not set -# CONFIG_CFG80211_INTERNAL_REGDB is not set -CONFIG_CFG80211_CRDA_SUPPORT=y -CONFIG_CFG80211_WEXT=y -CONFIG_CFG80211_WEXT_EXPORT=y -CONFIG_LIB80211=m -CONFIG_LIB80211_CRYPT_WEP=m -CONFIG_LIB80211_CRYPT_CCMP=m -CONFIG_LIB80211_CRYPT_TKIP=m -# CONFIG_LIB80211_DEBUG is not set -CONFIG_MAC80211=m -CONFIG_MAC80211_HAS_RC=y -CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_MINSTREL_HT=y -# CONFIG_MAC80211_RC_MINSTREL_VHT is not set -CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y -CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" -CONFIG_MAC80211_MESH=y -CONFIG_MAC80211_LEDS=y -# CONFIG_MAC80211_DEBUGFS is not set -# CONFIG_MAC80211_MESSAGE_TRACING is not set -# CONFIG_MAC80211_DEBUG_MENU is not set -CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 -CONFIG_WIMAX=m -CONFIG_WIMAX_DEBUG_LEVEL=8 -CONFIG_RFKILL=m -CONFIG_RFKILL_LEDS=y -CONFIG_RFKILL_INPUT=y -CONFIG_RFKILL_REGULATOR=m -CONFIG_RFKILL_GPIO=m -CONFIG_NET_9P=m -CONFIG_NET_9P_VIRTIO=m -CONFIG_NET_9P_RDMA=m -# CONFIG_NET_9P_DEBUG is not set -# CONFIG_CAIF is not set -CONFIG_CEPH_LIB=m -# CONFIG_CEPH_LIB_PRETTYDEBUG is not set -# CONFIG_CEPH_LIB_USE_DNS_RESOLVER is not set -CONFIG_NFC=m -CONFIG_NFC_DIGITAL=m -CONFIG_NFC_NCI=m -# CONFIG_NFC_NCI_UART is not set -CONFIG_NFC_HCI=m -# CONFIG_NFC_SHDLC is not set - -# -# Near Field Communication (NFC) devices -# -CONFIG_NFC_PN533=m -CONFIG_NFC_WILINK=m -# CONFIG_NFC_MEI_PHY is not set -CONFIG_NFC_SIM=m -CONFIG_NFC_PORT100=m -# CONFIG_NFC_FDP is not set -CONFIG_NFC_MRVL=m -CONFIG_NFC_MRVL_USB=m -# CONFIG_NFC_MRVL_I2C is not set -CONFIG_NFC_ST21NFCA=m -# CONFIG_NFC_ST_NCI is not set -CONFIG_NFC_NXP_NCI=m -CONFIG_NFC_NXP_NCI_I2C=m -# CONFIG_NFC_S3FWRN5_I2C is not set -CONFIG_LWTUNNEL=y -CONFIG_DST_CACHE=y - -# -# Device Drivers -# - -# -# Generic Driver Options -# -CONFIG_UEVENT_HELPER=y -CONFIG_UEVENT_HELPER_PATH="" -CONFIG_DEVTMPFS=y -CONFIG_DEVTMPFS_MOUNT=y -CONFIG_STANDALONE=y -CONFIG_PREVENT_FIRMWARE_BUILD=y -CONFIG_FW_LOADER=y -# CONFIG_FIRMWARE_IN_KERNEL is not set -CONFIG_EXTRA_FIRMWARE="" -CONFIG_FW_LOADER_USER_HELPER=y -# CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set -CONFIG_WANT_DEV_COREDUMP=y -CONFIG_ALLOW_DEV_COREDUMP=y -CONFIG_DEV_COREDUMP=y -# CONFIG_DEBUG_DRIVER is not set -# CONFIG_DEBUG_DEVRES is not set -CONFIG_SYS_HYPERVISOR=y -# CONFIG_GENERIC_CPU_DEVICES is not set -CONFIG_GENERIC_CPU_AUTOPROBE=y -CONFIG_GENERIC_CPU_VULNERABILITIES=y -CONFIG_REGMAP=y -CONFIG_REGMAP_I2C=m -CONFIG_REGMAP_MMIO=y -CONFIG_REGMAP_IRQ=y -CONFIG_DMA_SHARED_BUFFER=y -# CONFIG_FENCE_TRACE is not set - -# -# Bus devices -# -CONFIG_CONNECTOR=y -CONFIG_PROC_EVENTS=y -CONFIG_MTD=m -CONFIG_MTD_TESTS=m -CONFIG_MTD_REDBOOT_PARTS=m -CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 -# CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set -# CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -CONFIG_MTD_CMDLINE_PARTS=m -CONFIG_MTD_AR7_PARTS=m - -# -# User Modules And Translation Layers -# -CONFIG_MTD_BLKDEVS=m -CONFIG_MTD_BLOCK=m -CONFIG_MTD_BLOCK_RO=m -CONFIG_FTL=m -CONFIG_NFTL=m -CONFIG_NFTL_RW=y -CONFIG_INFTL=m -CONFIG_RFD_FTL=m -CONFIG_SSFDC=m -CONFIG_SM_FTL=m -CONFIG_MTD_OOPS=m -CONFIG_MTD_SWAP=m -# CONFIG_MTD_PARTITIONED_MASTER is not set - -# -# RAM/ROM/Flash chip drivers -# -CONFIG_MTD_CFI=m -CONFIG_MTD_JEDECPROBE=m -CONFIG_MTD_GEN_PROBE=m -CONFIG_MTD_CFI_ADV_OPTIONS=y -CONFIG_MTD_CFI_NOSWAP=y -# CONFIG_MTD_CFI_BE_BYTE_SWAP is not set -# CONFIG_MTD_CFI_LE_BYTE_SWAP is not set -CONFIG_MTD_CFI_GEOMETRY=y -CONFIG_MTD_MAP_BANK_WIDTH_1=y -CONFIG_MTD_MAP_BANK_WIDTH_2=y -CONFIG_MTD_MAP_BANK_WIDTH_4=y -CONFIG_MTD_MAP_BANK_WIDTH_8=y -CONFIG_MTD_MAP_BANK_WIDTH_16=y -CONFIG_MTD_MAP_BANK_WIDTH_32=y -CONFIG_MTD_CFI_I1=y -CONFIG_MTD_CFI_I2=y -CONFIG_MTD_CFI_I4=y -CONFIG_MTD_CFI_I8=y -CONFIG_MTD_OTP=y -CONFIG_MTD_CFI_INTELEXT=m -CONFIG_MTD_CFI_AMDSTD=m -CONFIG_MTD_CFI_STAA=m -CONFIG_MTD_CFI_UTIL=m -CONFIG_MTD_RAM=m -CONFIG_MTD_ROM=m -CONFIG_MTD_ABSENT=m - -# -# Mapping drivers for chip access -# -CONFIG_MTD_COMPLEX_MAPPINGS=y -CONFIG_MTD_PHYSMAP=m -# CONFIG_MTD_PHYSMAP_COMPAT is not set -CONFIG_MTD_SBC_GXX=m -CONFIG_MTD_SCx200_DOCFLASH=m -CONFIG_MTD_AMD76XROM=m -CONFIG_MTD_ICHXROM=m -CONFIG_MTD_ESB2ROM=m -CONFIG_MTD_CK804XROM=m -CONFIG_MTD_SCB2_FLASH=m -CONFIG_MTD_NETtel=m -CONFIG_MTD_L440GX=m -CONFIG_MTD_PCI=m -CONFIG_MTD_PCMCIA=m -# CONFIG_MTD_PCMCIA_ANONYMOUS is not set -CONFIG_MTD_GPIO_ADDR=m -CONFIG_MTD_INTEL_VR_NOR=m -CONFIG_MTD_PLATRAM=m -CONFIG_MTD_LATCH_ADDR=m - -# -# Self-contained MTD device drivers -# -CONFIG_MTD_PMC551=m -CONFIG_MTD_PMC551_BUGFIX=y -# CONFIG_MTD_PMC551_DEBUG is not set -CONFIG_MTD_SLRAM=m -CONFIG_MTD_PHRAM=m -CONFIG_MTD_MTDRAM=m -CONFIG_MTDRAM_TOTAL_SIZE=4096 -CONFIG_MTDRAM_ERASE_SIZE=128 -CONFIG_MTD_BLOCK2MTD=m - -# -# Disk-On-Chip Device Drivers -# -CONFIG_MTD_DOCG3=m -CONFIG_BCH_CONST_M=14 -CONFIG_BCH_CONST_T=4 -CONFIG_MTD_NAND_ECC=m -CONFIG_MTD_NAND_ECC_SMC=y -CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_BCH=m -CONFIG_MTD_NAND_ECC_BCH=y -CONFIG_MTD_SM_COMMON=m -CONFIG_MTD_NAND_DENALI=m -CONFIG_MTD_NAND_DENALI_PCI=m -CONFIG_MTD_NAND_DENALI_DT=m -CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018 -CONFIG_MTD_NAND_GPIO=m -# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set -CONFIG_MTD_NAND_IDS=m -CONFIG_MTD_NAND_RICOH=m -CONFIG_MTD_NAND_DISKONCHIP=m -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y -CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 -CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y -CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y -CONFIG_MTD_NAND_DOCG4=m -CONFIG_MTD_NAND_CAFE=m -CONFIG_MTD_NAND_CS553X=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_PLATFORM=m -CONFIG_MTD_NAND_HISI504=m -CONFIG_MTD_ONENAND=m -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -CONFIG_MTD_ONENAND_GENERIC=m -CONFIG_MTD_ONENAND_OTP=y -CONFIG_MTD_ONENAND_2X_PROGRAM=y - -# -# LPDDR & LPDDR2 PCM memory drivers -# -CONFIG_MTD_LPDDR=m -CONFIG_MTD_QINFO_PROBE=m -# CONFIG_MTD_SPI_NOR is not set -CONFIG_MTD_UBI=m -CONFIG_MTD_UBI_WL_THRESHOLD=4096 -CONFIG_MTD_UBI_BEB_LIMIT=20 -# CONFIG_MTD_UBI_FASTMAP is not set -CONFIG_MTD_UBI_GLUEBI=m -# CONFIG_MTD_UBI_BLOCK is not set -# CONFIG_OF is not set -CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y -CONFIG_PARPORT=m -CONFIG_PARPORT_PC=m -CONFIG_PARPORT_SERIAL=m -# CONFIG_PARPORT_PC_FIFO is not set -# CONFIG_PARPORT_PC_SUPERIO is not set -CONFIG_PARPORT_PC_PCMCIA=m -# CONFIG_PARPORT_GSC is not set -CONFIG_PARPORT_AX88796=m -CONFIG_PARPORT_1284=y -CONFIG_PARPORT_NOT_PC=y -CONFIG_PNP=y -CONFIG_PNP_DEBUG_MESSAGES=y - -# -# Protocols -# -CONFIG_ISAPNP=y -# CONFIG_PNPBIOS is not set -CONFIG_PNPACPI=y -CONFIG_BLK_DEV=y -CONFIG_BLK_DEV_NULL_BLK=m -CONFIG_BLK_DEV_FD=y -CONFIG_PARIDE=m - -# -# Parallel IDE high-level drivers -# -CONFIG_PARIDE_PD=m -CONFIG_PARIDE_PCD=m -CONFIG_PARIDE_PF=m -CONFIG_PARIDE_PT=m -CONFIG_PARIDE_PG=m - -# -# Parallel IDE protocol modules -# -CONFIG_PARIDE_ATEN=m -CONFIG_PARIDE_BPCK=m -CONFIG_PARIDE_BPCK6=m -CONFIG_PARIDE_COMM=m -CONFIG_PARIDE_DSTR=m -CONFIG_PARIDE_FIT2=m -CONFIG_PARIDE_FIT3=m -CONFIG_PARIDE_EPAT=m -CONFIG_PARIDE_EPATC8=y -CONFIG_PARIDE_EPIA=m -CONFIG_PARIDE_FRIQ=m -CONFIG_PARIDE_FRPW=m -CONFIG_PARIDE_KBIC=m -CONFIG_PARIDE_KTTI=m -CONFIG_PARIDE_ON20=m -CONFIG_PARIDE_ON26=m -CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m -CONFIG_ZRAM=m -# CONFIG_ZRAM_LZ4_COMPRESS is not set -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_BLK_DEV_COW_COMMON is not set -CONFIG_BLK_DEV_LOOP=m -CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 -CONFIG_BLK_DEV_CRYPTOLOOP=m -CONFIG_BLK_DEV_DRBD=m -# CONFIG_DRBD_FAULT_INJECTION is not set -CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_OSD=m -CONFIG_BLK_DEV_SX8=m -CONFIG_BLK_DEV_RAM=y -CONFIG_BLK_DEV_RAM_COUNT=16 -CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_BLK_DEV_RAM_DAX=y -CONFIG_CDROM_PKTCDVD=m -CONFIG_CDROM_PKTCDVD_BUFFERS=8 -# CONFIG_CDROM_PKTCDVD_WCACHE is not set -CONFIG_ATA_OVER_ETH=m -CONFIG_XEN_BLKDEV_FRONTEND=y -CONFIG_XEN_BLKDEV_BACKEND=y -CONFIG_VIRTIO_BLK=m -# CONFIG_BLK_DEV_HD is not set -CONFIG_BLK_DEV_RBD=m -CONFIG_BLK_DEV_RSXX=m -CONFIG_BLK_DEV_NVME=m - -# -# Misc devices -# -CONFIG_SENSORS_LIS3LV02D=m -CONFIG_AD525X_DPOT=m -CONFIG_AD525X_DPOT_I2C=m -CONFIG_DUMMY_IRQ=m -CONFIG_IBM_ASM=m -CONFIG_PHANTOM=m -CONFIG_SGI_IOC4=m -CONFIG_TIFM_CORE=m -CONFIG_TIFM_7XX1=m -CONFIG_ICS932S401=m -CONFIG_ENCLOSURE_SERVICES=m -CONFIG_CS5535_MFGPT=m -CONFIG_CS5535_MFGPT_DEFAULT_IRQ=7 -CONFIG_CS5535_CLOCK_EVENT_SRC=m -CONFIG_HP_ILO=m -CONFIG_APDS9802ALS=m -CONFIG_ISL29003=m -CONFIG_ISL29020=m -CONFIG_SENSORS_TSL2550=m -CONFIG_SENSORS_BH1780=m -CONFIG_SENSORS_BH1770=m -CONFIG_SENSORS_APDS990X=m -CONFIG_HMC6352=m -CONFIG_DS1682=m -CONFIG_VMWARE_BALLOON=m -CONFIG_BMP085=m -CONFIG_BMP085_I2C=m -CONFIG_PCH_PHUB=m -CONFIG_USB_SWITCH_FSA9480=m -# CONFIG_SRAM is not set -# CONFIG_C2PORT is not set - -# -# EEPROM support -# -CONFIG_EEPROM_AT24=m -CONFIG_EEPROM_LEGACY=m -CONFIG_EEPROM_MAX6875=m -CONFIG_EEPROM_93CX6=m -CONFIG_CB710_CORE=m -# CONFIG_CB710_DEBUG is not set -CONFIG_CB710_DEBUG_ASSUMPTIONS=y - -# -# Texas Instruments shared transport line discipline -# -CONFIG_TI_ST=m -CONFIG_SENSORS_LIS3_I2C=m - -# -# Altera FPGA firmware download module -# -CONFIG_ALTERA_STAPL=m -CONFIG_INTEL_MEI=m -CONFIG_INTEL_MEI_ME=m -CONFIG_INTEL_MEI_TXE=m -CONFIG_VMWARE_VMCI=m - -# -# Intel MIC Bus Driver -# - -# -# SCIF Bus Driver -# - -# -# Intel MIC Host Driver -# - -# -# Intel MIC Card Driver -# - -# -# SCIF Driver -# - -# -# Intel MIC Coprocessor State Management (COSM) Drivers -# -# CONFIG_ECHO is not set -# CONFIG_CXL_BASE is not set -# CONFIG_CXL_KERNEL_API is not set -# CONFIG_CXL_EEH is not set -CONFIG_HAVE_IDE=y -# CONFIG_IDE is not set - -# -# SCSI device support -# -CONFIG_SCSI_MOD=y -CONFIG_RAID_ATTRS=y -CONFIG_SCSI=y -CONFIG_SCSI_DMA=y -CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_MQ_DEFAULT is not set -CONFIG_SCSI_PROC_FS=y - -# -# SCSI support type (disk, tape, CD-ROM) -# -CONFIG_BLK_DEV_SD=y -CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m -CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y -CONFIG_CHR_DEV_SG=m -CONFIG_CHR_DEV_SCH=m -CONFIG_SCSI_ENCLOSURE=m -# CONFIG_SCSI_CONSTANTS is not set -# CONFIG_SCSI_LOGGING is not set -# CONFIG_SCSI_SCAN_ASYNC is not set - -# -# SCSI Transports -# -CONFIG_SCSI_SPI_ATTRS=y -CONFIG_SCSI_FC_ATTRS=m -CONFIG_SCSI_ISCSI_ATTRS=m -CONFIG_SCSI_SAS_ATTRS=y -CONFIG_SCSI_SAS_LIBSAS=y -CONFIG_SCSI_SAS_ATA=y -CONFIG_SCSI_SAS_HOST_SMP=y -CONFIG_SCSI_SRP_ATTRS=m -CONFIG_SCSI_LOWLEVEL=y -CONFIG_ISCSI_TCP=m -CONFIG_ISCSI_BOOT_SYSFS=y -CONFIG_SCSI_CXGB3_ISCSI=m -CONFIG_SCSI_CXGB4_ISCSI=m -CONFIG_SCSI_BNX2_ISCSI=m -CONFIG_SCSI_BNX2X_FCOE=m -CONFIG_BE2ISCSI=m -CONFIG_BLK_DEV_3W_XXXX_RAID=m -CONFIG_SCSI_HPSA=m -CONFIG_SCSI_3W_9XXX=m -CONFIG_SCSI_3W_SAS=m -CONFIG_SCSI_7000FASST=m -CONFIG_SCSI_ACARD=m -CONFIG_SCSI_AHA152X=m -CONFIG_SCSI_AHA1542=m -CONFIG_SCSI_AACRAID=m -CONFIG_SCSI_AIC7XXX=m -CONFIG_AIC7XXX_CMDS_PER_DEVICE=4 -CONFIG_AIC7XXX_RESET_DELAY_MS=15000 -# CONFIG_AIC7XXX_DEBUG_ENABLE is not set -CONFIG_AIC7XXX_DEBUG_MASK=0 -# CONFIG_AIC7XXX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC79XX=m -CONFIG_AIC79XX_CMDS_PER_DEVICE=4 -CONFIG_AIC79XX_RESET_DELAY_MS=15000 -# CONFIG_AIC79XX_DEBUG_ENABLE is not set -CONFIG_AIC79XX_DEBUG_MASK=0 -# CONFIG_AIC79XX_REG_PRETTY_PRINT is not set -CONFIG_SCSI_AIC94XX=m -# CONFIG_AIC94XX_DEBUG is not set -CONFIG_SCSI_MVSAS=m -# CONFIG_SCSI_MVSAS_DEBUG is not set -# CONFIG_SCSI_MVSAS_TASKLET is not set -CONFIG_SCSI_MVUMI=m -CONFIG_SCSI_DPT_I2O=m -CONFIG_SCSI_ADVANSYS=m -CONFIG_SCSI_IN2000=m -CONFIG_SCSI_ARCMSR=m -CONFIG_SCSI_ESAS2R=m -CONFIG_MEGARAID_NEWGEN=y -CONFIG_MEGARAID_MM=m -CONFIG_MEGARAID_MAILBOX=m -CONFIG_MEGARAID_LEGACY=m -CONFIG_MEGARAID_SAS=m -CONFIG_SCSI_MPT3SAS=m -CONFIG_SCSI_MPT2SAS_MAX_SGE=128 -CONFIG_SCSI_MPT3SAS_MAX_SGE=128 -CONFIG_SCSI_MPT2SAS=m -CONFIG_SCSI_UFSHCD=m -CONFIG_SCSI_UFSHCD_PCI=m -CONFIG_SCSI_UFSHCD_PLATFORM=m -CONFIG_SCSI_HPTIOP=m -CONFIG_SCSI_BUSLOGIC=m -CONFIG_SCSI_FLASHPOINT=y -CONFIG_VMWARE_PVSCSI=m -# CONFIG_XEN_SCSI_FRONTEND is not set -CONFIG_HYPERV_STORAGE=m -CONFIG_LIBFC=m -CONFIG_LIBFCOE=m -CONFIG_FCOE=m -CONFIG_FCOE_FNIC=m -CONFIG_SCSI_SNIC=m -# CONFIG_SCSI_SNIC_DEBUG_FS is not set -CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_DTC3280=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m -CONFIG_SCSI_ISCI=m -CONFIG_SCSI_GENERIC_NCR5380=m -CONFIG_SCSI_GENERIC_NCR5380_MMIO=m -CONFIG_SCSI_GENERIC_NCR53C400=y -CONFIG_SCSI_IPS=m -CONFIG_SCSI_INITIO=m -CONFIG_SCSI_INIA100=m -CONFIG_SCSI_PPA=m -CONFIG_SCSI_IMM=m -# CONFIG_SCSI_IZIP_EPP16 is not set -# CONFIG_SCSI_IZIP_SLOW_CTR is not set -CONFIG_SCSI_NCR53C406A=m -CONFIG_SCSI_STEX=m -CONFIG_SCSI_SYM53C8XX_2=m -CONFIG_SCSI_SYM53C8XX_DMA_ADDRESSING_MODE=1 -CONFIG_SCSI_SYM53C8XX_DEFAULT_TAGS=16 -CONFIG_SCSI_SYM53C8XX_MAX_TAGS=64 -CONFIG_SCSI_SYM53C8XX_MMIO=y -CONFIG_SCSI_IPR=m -# CONFIG_SCSI_IPR_TRACE is not set -# CONFIG_SCSI_IPR_DUMP is not set -CONFIG_SCSI_PAS16=m -CONFIG_SCSI_QLOGIC_FAS=m -CONFIG_SCSI_QLOGIC_1280=m -CONFIG_SCSI_QLA_FC=m -CONFIG_TCM_QLA2XXX=m -CONFIG_SCSI_QLA_ISCSI=m -CONFIG_SCSI_LPFC=m -# CONFIG_SCSI_LPFC_DEBUG_FS is not set -CONFIG_SCSI_SYM53C416=m -CONFIG_SCSI_DC395x=m -CONFIG_SCSI_AM53C974=m -CONFIG_SCSI_T128=m -CONFIG_SCSI_U14_34F=m -# CONFIG_SCSI_U14_34F_TAGGED_QUEUE is not set -# CONFIG_SCSI_U14_34F_LINKED_COMMANDS is not set -CONFIG_SCSI_U14_34F_MAX_TAGS=8 -CONFIG_SCSI_ULTRASTOR=m -CONFIG_SCSI_NSP32=m -CONFIG_SCSI_WD719X=m -CONFIG_SCSI_DEBUG=m -CONFIG_SCSI_PMCRAID=m -CONFIG_SCSI_PM8001=m -CONFIG_SCSI_BFA_FC=m -CONFIG_SCSI_VIRTIO=m -CONFIG_SCSI_CHELSIO_FCOE=m -CONFIG_SCSI_LOWLEVEL_PCMCIA=y -CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m -CONFIG_PCMCIA_NINJA_SCSI=m -CONFIG_PCMCIA_QLOGIC=m -CONFIG_PCMCIA_SYM53C500=m -CONFIG_SCSI_DH=y -CONFIG_SCSI_DH_RDAC=m -CONFIG_SCSI_DH_HP_SW=m -CONFIG_SCSI_DH_EMC=m -CONFIG_SCSI_DH_ALUA=m -CONFIG_SCSI_OSD_INITIATOR=m -CONFIG_SCSI_OSD_ULD=m -CONFIG_SCSI_OSD_DPRINT_SENSE=1 -# CONFIG_SCSI_OSD_DEBUG is not set -CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set -CONFIG_ATA_VERBOSE_ERROR=y -CONFIG_ATA_ACPI=y -# CONFIG_SATA_ZPODD is not set -CONFIG_SATA_PMP=y - -# -# Controllers with non-SFF native interface -# -CONFIG_SATA_AHCI=y -CONFIG_SATA_AHCI_PLATFORM=y -CONFIG_SATA_INIC162X=y -CONFIG_SATA_ACARD_AHCI=y -CONFIG_SATA_SIL24=y -CONFIG_ATA_SFF=y - -# -# SFF controllers with custom DMA interface -# -CONFIG_PDC_ADMA=y -CONFIG_SATA_QSTOR=y -CONFIG_SATA_SX4=y -CONFIG_ATA_BMDMA=y - -# -# SATA SFF controllers with BMDMA -# -CONFIG_ATA_PIIX=y -CONFIG_SATA_MV=y -CONFIG_SATA_NV=y -CONFIG_SATA_PROMISE=y -CONFIG_SATA_SIL=y -CONFIG_SATA_SIS=y -CONFIG_SATA_SVW=y -CONFIG_SATA_ULI=y -CONFIG_SATA_VIA=y -CONFIG_SATA_VITESSE=y - -# -# PATA SFF controllers with BMDMA -# -CONFIG_PATA_ALI=y -CONFIG_PATA_AMD=y -CONFIG_PATA_ARTOP=y -CONFIG_PATA_ATIIXP=y -CONFIG_PATA_ATP867X=y -CONFIG_PATA_CMD64X=y -CONFIG_PATA_CS5520=y -CONFIG_PATA_CS5530=y -CONFIG_PATA_CS5535=y -CONFIG_PATA_CS5536=y -CONFIG_PATA_CYPRESS=y -CONFIG_PATA_EFAR=y -CONFIG_PATA_HPT366=y -CONFIG_PATA_HPT37X=y -CONFIG_PATA_HPT3X2N=y -CONFIG_PATA_HPT3X3=y -CONFIG_PATA_HPT3X3_DMA=y -CONFIG_PATA_IT8213=y -CONFIG_PATA_IT821X=y -CONFIG_PATA_JMICRON=y -CONFIG_PATA_MARVELL=y -CONFIG_PATA_NETCELL=y -CONFIG_PATA_NINJA32=y -CONFIG_PATA_NS87415=y -CONFIG_PATA_OLDPIIX=y -CONFIG_PATA_OPTIDMA=y -CONFIG_PATA_PDC2027X=y -CONFIG_PATA_PDC_OLD=y -CONFIG_PATA_RADISYS=y -CONFIG_PATA_RDC=y -CONFIG_PATA_SC1200=y -CONFIG_PATA_SCH=y -CONFIG_PATA_SERVERWORKS=y -CONFIG_PATA_SIL680=y -CONFIG_PATA_SIS=y -CONFIG_PATA_TOSHIBA=m -CONFIG_PATA_TRIFLEX=y -CONFIG_PATA_VIA=y -CONFIG_PATA_WINBOND=y - -# -# PIO-only SFF controllers -# -CONFIG_PATA_CMD640_PCI=y -CONFIG_PATA_ISAPNP=y -CONFIG_PATA_MPIIX=y -CONFIG_PATA_NS87410=y -CONFIG_PATA_OPTI=y -CONFIG_PATA_PCMCIA=m -# CONFIG_PATA_PLATFORM is not set -CONFIG_PATA_QDI=y -CONFIG_PATA_RZ1000=y -CONFIG_PATA_WINBOND_VLB=y - -# -# Generic fallback / legacy drivers -# -CONFIG_PATA_ACPI=y -CONFIG_ATA_GENERIC=y -CONFIG_PATA_LEGACY=y -CONFIG_MD=y -CONFIG_BLK_DEV_MD=y -CONFIG_MD_AUTODETECT=y -CONFIG_MD_LINEAR=y -CONFIG_MD_RAID0=y -CONFIG_MD_RAID1=y -CONFIG_MD_RAID10=y -CONFIG_MD_RAID456=y -CONFIG_MD_MULTIPATH=y -CONFIG_MD_FAULTY=m -CONFIG_MD_CLUSTER=m -CONFIG_BCACHE=m -# CONFIG_BCACHE_DEBUG is not set -# CONFIG_BCACHE_CLOSURES_DEBUG is not set -CONFIG_BLK_DEV_DM_BUILTIN=y -CONFIG_BLK_DEV_DM=y -# CONFIG_DM_MQ_DEFAULT is not set -# CONFIG_DM_DEBUG is not set -CONFIG_DM_BUFIO=m -CONFIG_DM_BIO_PRISON=m -CONFIG_DM_PERSISTENT_DATA=m -# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set -CONFIG_DM_CRYPT=y -CONFIG_DM_SNAPSHOT=m -CONFIG_DM_THIN_PROVISIONING=m -CONFIG_DM_CACHE=m -CONFIG_DM_CACHE_MQ=m -CONFIG_DM_CACHE_SMQ=m -CONFIG_DM_CACHE_CLEANER=m -CONFIG_DM_ERA=m -CONFIG_DM_MIRROR=y -CONFIG_DM_LOG_USERSPACE=m -CONFIG_DM_RAID=m -CONFIG_DM_ZERO=m -CONFIG_DM_MULTIPATH=m -CONFIG_DM_MULTIPATH_QL=m -CONFIG_DM_MULTIPATH_ST=m -# CONFIG_DM_DELAY is not set -CONFIG_DM_UEVENT=y -CONFIG_DM_FLAKEY=m -CONFIG_DM_VERITY=m -CONFIG_DM_SWITCH=m -CONFIG_DM_LOG_WRITES=m -CONFIG_TARGET_CORE=m -CONFIG_TCM_IBLOCK=m -CONFIG_TCM_FILEIO=m -CONFIG_TCM_PSCSI=m -CONFIG_TCM_USER2=m -CONFIG_LOOPBACK_TARGET=m -CONFIG_TCM_FC=m -CONFIG_ISCSI_TARGET=m -CONFIG_SBP_TARGET=m -CONFIG_FUSION=y -CONFIG_FUSION_SPI=m -CONFIG_FUSION_FC=m -CONFIG_FUSION_SAS=m -CONFIG_FUSION_MAX_SGE=128 -CONFIG_FUSION_CTL=m -CONFIG_FUSION_LAN=m -# CONFIG_FUSION_LOGGING is not set - -# -# IEEE 1394 (FireWire) support -# -CONFIG_FIREWIRE=m -CONFIG_FIREWIRE_OHCI=m -CONFIG_FIREWIRE_SBP2=m -CONFIG_FIREWIRE_NET=m -CONFIG_FIREWIRE_NOSY=m -CONFIG_MACINTOSH_DRIVERS=y -CONFIG_MAC_EMUMOUSEBTN=y -CONFIG_NETDEVICES=y -CONFIG_MII=m -CONFIG_NET_CORE=y -CONFIG_BONDING=m -CONFIG_DUMMY=m -CONFIG_EQUALIZER=m -CONFIG_NET_FC=y -CONFIG_IFB=m -CONFIG_NET_TEAM=m -CONFIG_NET_TEAM_MODE_BROADCAST=m -CONFIG_NET_TEAM_MODE_ROUNDROBIN=m -CONFIG_NET_TEAM_MODE_RANDOM=m -CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m -CONFIG_NET_TEAM_MODE_LOADBALANCE=m -CONFIG_MACVLAN=m -CONFIG_MACVTAP=m -CONFIG_IPVLAN=m -CONFIG_VXLAN=m -CONFIG_GENEVE=m -CONFIG_NETCONSOLE=m -CONFIG_NETCONSOLE_DYNAMIC=y -CONFIG_NETPOLL=y -CONFIG_NET_POLL_CONTROLLER=y -CONFIG_NTB_NETDEV=m -CONFIG_TUN=m -# CONFIG_TUN_VNET_CROSS_LE is not set -CONFIG_VETH=m -CONFIG_VIRTIO_NET=m -CONFIG_NLMON=m -CONFIG_SUNGEM_PHY=m -CONFIG_ARCNET=m -CONFIG_ARCNET_1201=m -CONFIG_ARCNET_1051=m -CONFIG_ARCNET_RAW=m -CONFIG_ARCNET_CAP=m -CONFIG_ARCNET_COM90xx=m -CONFIG_ARCNET_COM90xxIO=m -CONFIG_ARCNET_RIM_I=m -CONFIG_ARCNET_COM20020=m -CONFIG_ARCNET_COM20020_ISA=m -CONFIG_ARCNET_COM20020_PCI=m -CONFIG_ARCNET_COM20020_CS=m -CONFIG_ATM_DRIVERS=y -CONFIG_ATM_DUMMY=m -CONFIG_ATM_TCP=m -CONFIG_ATM_LANAI=m -CONFIG_ATM_ENI=m -# CONFIG_ATM_ENI_DEBUG is not set -# CONFIG_ATM_ENI_TUNE_BURST is not set -CONFIG_ATM_FIRESTREAM=m -CONFIG_ATM_ZATM=m -# CONFIG_ATM_ZATM_DEBUG is not set -CONFIG_ATM_NICSTAR=m -# CONFIG_ATM_NICSTAR_USE_SUNI is not set -# CONFIG_ATM_NICSTAR_USE_IDT77105 is not set -CONFIG_ATM_IDT77252=m -# CONFIG_ATM_IDT77252_DEBUG is not set -# CONFIG_ATM_IDT77252_RCV_ALL is not set -CONFIG_ATM_IDT77252_USE_SUNI=y -CONFIG_ATM_AMBASSADOR=m -# CONFIG_ATM_AMBASSADOR_DEBUG is not set -CONFIG_ATM_HORIZON=m -# CONFIG_ATM_HORIZON_DEBUG is not set -CONFIG_ATM_IA=m -# CONFIG_ATM_IA_DEBUG is not set -CONFIG_ATM_FORE200E=m -# CONFIG_ATM_FORE200E_USE_TASKLET is not set -CONFIG_ATM_FORE200E_TX_RETRY=16 -CONFIG_ATM_FORE200E_DEBUG=0 -CONFIG_ATM_HE=m -# CONFIG_ATM_HE_USE_SUNI is not set -CONFIG_ATM_SOLOS=m - -# -# CAIF transport drivers -# -CONFIG_VHOST_NET=m -CONFIG_VHOST_SCSI=m -CONFIG_VHOST_RING=m -CONFIG_VHOST=m -# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set - -# -# Distributed Switch Architecture drivers -# -CONFIG_NET_DSA_MV88E6XXX=m -CONFIG_NET_DSA_MV88E6060=m -CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y -CONFIG_NET_DSA_MV88E6131=m -CONFIG_NET_DSA_MV88E6123_61_65=m -CONFIG_NET_DSA_MV88E6171=m -CONFIG_NET_DSA_MV88E6352=m -CONFIG_NET_DSA_BCM_SF2=m -CONFIG_ETHERNET=y -CONFIG_MDIO=m -CONFIG_NET_VENDOR_3COM=y -CONFIG_EL3=m -CONFIG_3C515=m -CONFIG_PCMCIA_3C574=m -CONFIG_PCMCIA_3C589=m -CONFIG_VORTEX=m -CONFIG_TYPHOON=m -CONFIG_NET_VENDOR_ADAPTEC=y -CONFIG_ADAPTEC_STARFIRE=m -CONFIG_NET_VENDOR_AGERE=y -# CONFIG_ET131X is not set -CONFIG_NET_VENDOR_ALTEON=y -CONFIG_ACENIC=m -# CONFIG_ACENIC_OMIT_TIGON_I is not set -CONFIG_ALTERA_TSE=m -CONFIG_NET_VENDOR_AMD=y -CONFIG_AMD8111_ETH=m -CONFIG_LANCE=m -CONFIG_PCNET32=m -CONFIG_PCMCIA_NMCLAN=m -CONFIG_NI65=m -CONFIG_NET_VENDOR_ARC=y -CONFIG_NET_VENDOR_ATHEROS=y -CONFIG_ATL2=m -CONFIG_ATL1=m -CONFIG_ATL1E=m -CONFIG_ATL1C=m -CONFIG_ALX=m -CONFIG_NET_VENDOR_AURORA=y -CONFIG_AURORA_NB8800=m -CONFIG_NET_CADENCE=y -CONFIG_MACB=m -CONFIG_NET_VENDOR_BROADCOM=y -CONFIG_B44=m -CONFIG_B44_PCI_AUTOSELECT=y -CONFIG_B44_PCICORE_AUTOSELECT=y -CONFIG_B44_PCI=y -CONFIG_BCMGENET=m -CONFIG_BNX2=m -CONFIG_CNIC=m -CONFIG_TIGON3=m -CONFIG_BNX2X=m -CONFIG_BNX2X_SRIOV=y -CONFIG_BNX2X_VXLAN=y -CONFIG_BNXT=m -CONFIG_BNXT_SRIOV=y -CONFIG_NET_VENDOR_BROCADE=y -CONFIG_BNA=m -CONFIG_NET_VENDOR_CAVIUM=y -CONFIG_NET_VENDOR_CHELSIO=y -CONFIG_CHELSIO_T1=m -CONFIG_CHELSIO_T1_1G=y -CONFIG_CHELSIO_T3=m -CONFIG_CHELSIO_T4=m -CONFIG_CHELSIO_T4VF=m -CONFIG_NET_VENDOR_CIRRUS=y -CONFIG_CS89x0=m -# CONFIG_CS89x0_PLATFORM is not set -CONFIG_NET_VENDOR_CISCO=y -CONFIG_ENIC=m -CONFIG_CX_ECAT=m -CONFIG_DNET=m -CONFIG_NET_VENDOR_DEC=y -CONFIG_NET_TULIP=y -CONFIG_DE2104X=m -CONFIG_DE2104X_DSL=0 -CONFIG_TULIP=m -# CONFIG_TULIP_MWI is not set -CONFIG_TULIP_MMIO=y -# CONFIG_TULIP_NAPI is not set -CONFIG_DE4X5=m -CONFIG_WINBOND_840=m -CONFIG_DM9102=m -CONFIG_ULI526X=m -CONFIG_PCMCIA_XIRCOM=m -CONFIG_NET_VENDOR_DLINK=y -CONFIG_DL2K=m -CONFIG_SUNDANCE=m -# CONFIG_SUNDANCE_MMIO is not set -CONFIG_NET_VENDOR_EMULEX=y -CONFIG_BE2NET=m -CONFIG_BE2NET_HWMON=y -CONFIG_BE2NET_VXLAN=y -CONFIG_NET_VENDOR_EZCHIP=y -CONFIG_NET_VENDOR_EXAR=y -CONFIG_S2IO=m -CONFIG_VXGE=m -# CONFIG_VXGE_DEBUG_TRACE_ALL is not set -CONFIG_NET_VENDOR_FUJITSU=y -CONFIG_PCMCIA_FMVJ18X=m -CONFIG_NET_VENDOR_HP=y -CONFIG_HP100=m -CONFIG_NET_VENDOR_INTEL=y -CONFIG_E100=m -CONFIG_E1000=m -CONFIG_E1000E=m -CONFIG_IGB=m -CONFIG_IGB_HWMON=y -CONFIG_IGBVF=m -CONFIG_IXGB=m -CONFIG_IXGBE=m -CONFIG_IXGBE_VXLAN=y -CONFIG_IXGBE_HWMON=y -CONFIG_IXGBEVF=m -CONFIG_I40E=m -# CONFIG_I40E_VXLAN is not set -CONFIG_I40EVF=m -CONFIG_FM10K=m -CONFIG_FM10K_VXLAN=y -CONFIG_NET_VENDOR_I825XX=y -CONFIG_JME=m -CONFIG_NET_VENDOR_MARVELL=y -CONFIG_MVMDIO=m -CONFIG_SKGE=m -# CONFIG_SKGE_DEBUG is not set -CONFIG_SKGE_GENESIS=y -CONFIG_SKY2=m -# CONFIG_SKY2_DEBUG is not set -CONFIG_NET_VENDOR_MELLANOX=y -CONFIG_MLX4_EN=m -CONFIG_MLX4_EN_VXLAN=y -CONFIG_MLX4_CORE=m -CONFIG_MLX4_DEBUG=y -CONFIG_MLX5_CORE=m -CONFIG_MLX5_CORE_EN=y -CONFIG_MLXSW_CORE=m -CONFIG_MLXSW_PCI=m -CONFIG_MLXSW_SWITCHX2=m -CONFIG_MLXSW_SPECTRUM=m -CONFIG_NET_VENDOR_MICREL=y -CONFIG_KS8842=m -CONFIG_KS8851_MLL=m -CONFIG_KSZ884X_PCI=m -CONFIG_NET_VENDOR_MYRI=y -CONFIG_MYRI10GE=m -CONFIG_FEALNX=m -CONFIG_NET_VENDOR_NATSEMI=y -CONFIG_NATSEMI=m -CONFIG_NS83820=m -CONFIG_NET_VENDOR_8390=y -CONFIG_PCMCIA_AXNET=m -CONFIG_NE2000=m -CONFIG_NE2K_PCI=m -CONFIG_PCMCIA_PCNET=m -CONFIG_ULTRA=m -CONFIG_WD80x3=m -CONFIG_NET_VENDOR_NVIDIA=y -CONFIG_FORCEDETH=m -CONFIG_NET_VENDOR_OKI=y -CONFIG_PCH_GBE=m -CONFIG_ETHOC=m -CONFIG_NET_PACKET_ENGINE=y -CONFIG_HAMACHI=m -CONFIG_YELLOWFIN=m -CONFIG_NET_VENDOR_QLOGIC=y -CONFIG_QLA3XXX=m -CONFIG_QLCNIC=m -CONFIG_QLCNIC_SRIOV=y -CONFIG_QLCNIC_VXLAN=y -CONFIG_QLCNIC_HWMON=y -CONFIG_QLGE=m -CONFIG_NETXEN_NIC=m -CONFIG_QED=m -CONFIG_QEDE=m -CONFIG_NET_VENDOR_QUALCOMM=y -CONFIG_NET_VENDOR_REALTEK=y -CONFIG_ATP=m -CONFIG_8139CP=m -CONFIG_8139TOO=m -CONFIG_8139TOO_PIO=y -# CONFIG_8139TOO_TUNE_TWISTER is not set -CONFIG_8139TOO_8129=y -# CONFIG_8139_OLD_RX_RESET is not set -CONFIG_R8169=m -CONFIG_NET_VENDOR_RENESAS=y -CONFIG_NET_VENDOR_RDC=y -CONFIG_R6040=m -CONFIG_NET_VENDOR_ROCKER=y -CONFIG_ROCKER=m -CONFIG_NET_VENDOR_SAMSUNG=y -CONFIG_SXGBE_ETH=m -CONFIG_NET_VENDOR_SEEQ=y -CONFIG_NET_VENDOR_SILAN=y -CONFIG_SC92031=m -CONFIG_NET_VENDOR_SIS=y -CONFIG_SIS900=m -CONFIG_SIS190=m -CONFIG_SFC=m -CONFIG_SFC_MTD=y -CONFIG_SFC_MCDI_MON=y -CONFIG_SFC_SRIOV=y -# CONFIG_SFC_MCDI_LOGGING is not set -CONFIG_NET_VENDOR_SMSC=y -CONFIG_SMC9194=m -CONFIG_PCMCIA_SMC91C92=m -CONFIG_EPIC100=m -CONFIG_SMSC911X=m -# CONFIG_SMSC911X_ARCH_HOOKS is not set -CONFIG_SMSC9420=m -CONFIG_NET_VENDOR_STMICRO=y -CONFIG_STMMAC_ETH=m -CONFIG_STMMAC_PLATFORM=m -CONFIG_DWMAC_GENERIC=m -# CONFIG_STMMAC_PCI is not set -CONFIG_NET_VENDOR_SUN=y -CONFIG_HAPPYMEAL=m -CONFIG_SUNGEM=m -CONFIG_CASSINI=m -CONFIG_NIU=m -CONFIG_NET_VENDOR_SYNOPSYS=y -CONFIG_NET_VENDOR_TEHUTI=y -CONFIG_TEHUTI=m -CONFIG_NET_VENDOR_TI=y -CONFIG_TI_CPSW_ALE=m -CONFIG_TLAN=m -CONFIG_NET_VENDOR_VIA=y -CONFIG_VIA_RHINE=m -CONFIG_VIA_RHINE_MMIO=y -CONFIG_VIA_VELOCITY=m -CONFIG_NET_VENDOR_WIZNET=y -CONFIG_WIZNET_W5100=m -CONFIG_WIZNET_W5300=m -# CONFIG_WIZNET_BUS_DIRECT is not set -# CONFIG_WIZNET_BUS_INDIRECT is not set -CONFIG_WIZNET_BUS_ANY=y -CONFIG_NET_VENDOR_XIRCOM=y -CONFIG_PCMCIA_XIRC2PS=m -CONFIG_FDDI=y -CONFIG_DEFXX=m -# CONFIG_DEFXX_MMIO is not set -CONFIG_SKFP=m -CONFIG_HIPPI=y -CONFIG_ROADRUNNER=m -# CONFIG_ROADRUNNER_LARGE_RINGS is not set -CONFIG_NET_SB1000=m -CONFIG_PHYLIB=m - -# -# MII PHY device drivers -# -CONFIG_AQUANTIA_PHY=m -CONFIG_AT803X_PHY=m -CONFIG_AMD_PHY=m -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_TERANETICS_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_BCM_NET_PHYLIB=m -CONFIG_BROADCOM_PHY=m -CONFIG_BCM7XXX_PHY=m -CONFIG_BCM87XX_PHY=m -CONFIG_ICPLUS_PHY=m -CONFIG_REALTEK_PHY=m -CONFIG_NATIONAL_PHY=m -CONFIG_STE10XP=m -CONFIG_LSI_ET1011C_PHY=m -CONFIG_MICREL_PHY=m -CONFIG_DP83848_PHY=m -CONFIG_DP83867_PHY=m -CONFIG_MICROCHIP_PHY=m -CONFIG_FIXED_PHY=m -CONFIG_MDIO_BITBANG=m -CONFIG_MDIO_GPIO=m -CONFIG_MDIO_BCM_UNIMAC=m -CONFIG_PLIP=m -CONFIG_PPP=m -CONFIG_PPP_BSDCOMP=m -CONFIG_PPP_DEFLATE=m -CONFIG_PPP_FILTER=y -CONFIG_PPP_MPPE=m -CONFIG_PPP_MULTILINK=y -CONFIG_PPPOATM=m -CONFIG_PPPOE=m -CONFIG_PPTP=m -CONFIG_PPPOL2TP=m -CONFIG_PPP_ASYNC=m -CONFIG_PPP_SYNC_TTY=m -CONFIG_SLIP=m -CONFIG_SLHC=m -CONFIG_SLIP_COMPRESSED=y -CONFIG_SLIP_SMART=y -# CONFIG_SLIP_MODE_SLIP6 is not set -CONFIG_USB_NET_DRIVERS=y -CONFIG_USB_CATC=m -CONFIG_USB_KAWETH=m -CONFIG_USB_PEGASUS=m -CONFIG_USB_RTL8150=m -CONFIG_USB_RTL8152=m -CONFIG_USB_LAN78XX=m -CONFIG_USB_USBNET=m -CONFIG_USB_NET_AX8817X=m -CONFIG_USB_NET_AX88179_178A=m -CONFIG_USB_NET_CDCETHER=m -CONFIG_USB_NET_CDC_EEM=m -CONFIG_USB_NET_CDC_NCM=m -CONFIG_USB_NET_HUAWEI_CDC_NCM=m -CONFIG_USB_NET_CDC_MBIM=m -CONFIG_USB_NET_DM9601=m -CONFIG_USB_NET_SR9700=m -CONFIG_USB_NET_SR9800=m -CONFIG_USB_NET_SMSC75XX=m -CONFIG_USB_NET_SMSC95XX=m -CONFIG_USB_NET_GL620A=m -CONFIG_USB_NET_NET1080=m -CONFIG_USB_NET_PLUSB=m -CONFIG_USB_NET_MCS7830=m -CONFIG_USB_NET_RNDIS_HOST=m -CONFIG_USB_NET_CDC_SUBSET_ENABLE=m -CONFIG_USB_NET_CDC_SUBSET=m -CONFIG_USB_ALI_M5632=y -CONFIG_USB_AN2720=y -CONFIG_USB_BELKIN=y -CONFIG_USB_ARMLINUX=y -# CONFIG_USB_EPSON2888 is not set -# CONFIG_USB_KC2190 is not set -CONFIG_USB_NET_ZAURUS=m -CONFIG_USB_NET_CX82310_ETH=m -CONFIG_USB_NET_KALMIA=m -CONFIG_USB_NET_QMI_WWAN=m -CONFIG_USB_HSO=m -CONFIG_USB_NET_INT51X1=m -CONFIG_USB_IPHETH=m -CONFIG_USB_SIERRA_NET=m -CONFIG_USB_VL600=m -CONFIG_USB_NET_CH9200=m -CONFIG_WLAN=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_LIBERTAS_THINFIRM=m -# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set -CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_AIRO=m -CONFIG_ATMEL=m -CONFIG_PCI_ATMEL=m -CONFIG_PCMCIA_ATMEL=m -CONFIG_AT76C50X_USB=m -CONFIG_AIRO_CS=m -CONFIG_PCMCIA_WL3501=m -CONFIG_PRISM54=m -CONFIG_USB_ZD1201=m -CONFIG_USB_NET_RNDIS_WLAN=m -CONFIG_ADM8211=m -CONFIG_RTL8180=m -CONFIG_RTL8187=m -CONFIG_RTL8187_LEDS=y -# CONFIG_MAC80211_HWSIM is not set -CONFIG_MWL8K=m -CONFIG_ATH_COMMON=m -CONFIG_ATH_CARDS=m -# CONFIG_ATH_DEBUG is not set -CONFIG_ATH5K=m -# CONFIG_ATH5K_DEBUG is not set -# CONFIG_ATH5K_TRACER is not set -CONFIG_ATH5K_PCI=y -CONFIG_ATH9K_HW=m -CONFIG_ATH9K_COMMON=m -CONFIG_ATH9K_BTCOEX_SUPPORT=y -CONFIG_ATH9K=m -CONFIG_ATH9K_PCI=y -# CONFIG_ATH9K_AHB is not set -# CONFIG_ATH9K_DEBUGFS is not set -# CONFIG_ATH9K_DYNACK is not set -CONFIG_ATH9K_WOW=y -CONFIG_ATH9K_RFKILL=y -CONFIG_ATH9K_CHANNEL_CONTEXT=y -CONFIG_ATH9K_PCOEM=y -CONFIG_ATH9K_HTC=m -# CONFIG_ATH9K_HTC_DEBUGFS is not set -CONFIG_CARL9170=m -CONFIG_CARL9170_LEDS=y -CONFIG_CARL9170_WPC=y -# CONFIG_CARL9170_HWRNG is not set -CONFIG_ATH6KL=m -CONFIG_ATH6KL_SDIO=m -CONFIG_ATH6KL_USB=m -# CONFIG_ATH6KL_DEBUG is not set -# CONFIG_ATH6KL_TRACING is not set -CONFIG_AR5523=m -CONFIG_WIL6210=m -CONFIG_WIL6210_ISR_COR=y -# CONFIG_WIL6210_TRACING is not set -CONFIG_ATH10K=m -CONFIG_ATH10K_PCI=m -# CONFIG_ATH10K_DEBUG is not set -CONFIG_ATH10K_DEBUGFS=y -# CONFIG_ATH10K_TRACING is not set -CONFIG_WCN36XX=m -CONFIG_WCN36XX_DEBUGFS=y -CONFIG_B43=m -CONFIG_B43_BCMA=y -CONFIG_B43_SSB=y -CONFIG_B43_BUSES_BCMA_AND_SSB=y -# CONFIG_B43_BUSES_BCMA is not set -# CONFIG_B43_BUSES_SSB is not set -CONFIG_B43_PCI_AUTOSELECT=y -CONFIG_B43_PCICORE_AUTOSELECT=y -CONFIG_B43_SDIO=y -CONFIG_B43_BCMA_PIO=y -CONFIG_B43_PIO=y -CONFIG_B43_PHY_G=y -CONFIG_B43_PHY_N=y -CONFIG_B43_PHY_LP=y -CONFIG_B43_PHY_HT=y -CONFIG_B43_LEDS=y -CONFIG_B43_HWRNG=y -# CONFIG_B43_DEBUG is not set -CONFIG_B43LEGACY=m -CONFIG_B43LEGACY_PCI_AUTOSELECT=y -CONFIG_B43LEGACY_PCICORE_AUTOSELECT=y -CONFIG_B43LEGACY_LEDS=y -CONFIG_B43LEGACY_HWRNG=y -# CONFIG_B43LEGACY_DEBUG is not set -CONFIG_B43LEGACY_DMA=y -CONFIG_B43LEGACY_PIO=y -CONFIG_B43LEGACY_DMA_AND_PIO_MODE=y -# CONFIG_B43LEGACY_DMA_MODE is not set -# CONFIG_B43LEGACY_PIO_MODE is not set -CONFIG_BRCMUTIL=m -CONFIG_BRCMSMAC=m -CONFIG_BRCMFMAC=m -CONFIG_BRCMFMAC_PROTO_BCDC=y -CONFIG_BRCMFMAC_PROTO_MSGBUF=y -CONFIG_BRCMFMAC_SDIO=y -CONFIG_BRCMFMAC_USB=y -CONFIG_BRCMFMAC_PCIE=y -CONFIG_BRCM_TRACING=y -# CONFIG_BRCMDBG is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -CONFIG_HOSTAP_CS=m -CONFIG_IPW2100=m -CONFIG_IPW2100_MONITOR=y -# CONFIG_IPW2100_DEBUG is not set -CONFIG_IPW2200=m -CONFIG_IPW2200_MONITOR=y -CONFIG_IPW2200_RADIOTAP=y -CONFIG_IPW2200_PROMISCUOUS=y -CONFIG_IPW2200_QOS=y -# CONFIG_IPW2200_DEBUG is not set -CONFIG_LIBIPW=m -# CONFIG_LIBIPW_DEBUG is not set -CONFIG_IWLWIFI=m -CONFIG_IWLWIFI_LEDS=y -CONFIG_IWLDVM=m -CONFIG_IWLMVM=m -CONFIG_IWLWIFI_OPMODE_MODULAR=y -# CONFIG_IWLWIFI_BCAST_FILTERING is not set -# CONFIG_IWLWIFI_UAPSD is not set - -# -# Debugging Options -# -# CONFIG_IWLWIFI_DEBUG is not set -# CONFIG_IWLWIFI_DEVICE_TRACING is not set -CONFIG_IWLEGACY=m -CONFIG_IWL4965=m -CONFIG_IWL3945=m - -# -# iwl3945 / iwl4965 Debugging Options -# -# CONFIG_IWLEGACY_DEBUG is not set -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_CS=m -CONFIG_LIBERTAS_SDIO=m -# CONFIG_LIBERTAS_DEBUG is not set -CONFIG_LIBERTAS_MESH=y -CONFIG_HERMES=m -# CONFIG_HERMES_PRISM is not set -CONFIG_HERMES_CACHE_FW_ON_INIT=y -CONFIG_PLX_HERMES=m -CONFIG_TMD_HERMES=m -CONFIG_NORTEL_HERMES=m -CONFIG_PCMCIA_HERMES=m -CONFIG_PCMCIA_SPECTRUM=m -CONFIG_ORINOCO_USB=m -CONFIG_P54_COMMON=m -CONFIG_P54_USB=m -CONFIG_P54_PCI=m -CONFIG_P54_LEDS=y -CONFIG_RT2X00=m -CONFIG_RT2400PCI=m -CONFIG_RT2500PCI=m -CONFIG_RT61PCI=m -CONFIG_RT2800PCI=m -CONFIG_RT2800PCI_RT33XX=y -CONFIG_RT2800PCI_RT35XX=y -CONFIG_RT2800PCI_RT53XX=y -CONFIG_RT2800PCI_RT3290=y -CONFIG_RT2500USB=m -CONFIG_RT73USB=m -CONFIG_RT2800USB=m -CONFIG_RT2800USB_RT33XX=y -CONFIG_RT2800USB_RT35XX=y -CONFIG_RT2800USB_RT3573=y -CONFIG_RT2800USB_RT53XX=y -CONFIG_RT2800USB_RT55XX=y -CONFIG_RT2800USB_UNKNOWN=y -CONFIG_RT2800_LIB=m -CONFIG_RT2800_LIB_MMIO=m -CONFIG_RT2X00_LIB_MMIO=m -CONFIG_RT2X00_LIB_PCI=m -CONFIG_RT2X00_LIB_USB=m -CONFIG_RT2X00_LIB=m -CONFIG_RT2X00_LIB_FIRMWARE=y -CONFIG_RT2X00_LIB_CRYPTO=y -CONFIG_RT2X00_LIB_LEDS=y -# CONFIG_RT2X00_DEBUG is not set -CONFIG_WL_MEDIATEK=y -CONFIG_MT7601U=m -CONFIG_RTL_CARDS=m -CONFIG_RTL8192CE=m -CONFIG_RTL8192SE=m -CONFIG_RTL8192DE=m -CONFIG_RTL8723AE=m -CONFIG_RTL8723BE=m -CONFIG_RTL8188EE=m -CONFIG_RTL8192EE=m -CONFIG_RTL8821AE=m -CONFIG_RTL8192CU=m -CONFIG_RTLWIFI=m -CONFIG_RTLWIFI_PCI=m -CONFIG_RTLWIFI_USB=m -# CONFIG_RTLWIFI_DEBUG is not set -CONFIG_RTL8192C_COMMON=m -CONFIG_RTL8723_COMMON=m -CONFIG_RTLBTCOEXIST=m -CONFIG_RTL8XXXU=m -CONFIG_RTL8XXXU_UNTESTED=y -CONFIG_WL_TI=y -CONFIG_WL1251=m -CONFIG_WL1251_SDIO=m -CONFIG_WL12XX=m -CONFIG_WL18XX=m -CONFIG_WLCORE=m -CONFIG_WLCORE_SDIO=m -CONFIG_WILINK_PLATFORM_DATA=y -CONFIG_ZD1211RW=m -# CONFIG_ZD1211RW_DEBUG is not set -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_SDIO=m -CONFIG_MWIFIEX_PCIE=m -CONFIG_MWIFIEX_USB=m -CONFIG_CW1200=m -CONFIG_CW1200_WLAN_SDIO=m -CONFIG_RSI_91X=m -CONFIG_RSI_DEBUGFS=y -CONFIG_RSI_SDIO=m -CONFIG_RSI_USB=m - -# -# WiMAX Wireless Broadband devices -# -CONFIG_WIMAX_I2400M=m -CONFIG_WIMAX_I2400M_USB=m -CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 -CONFIG_WAN=y -CONFIG_HOSTESS_SV11=m -CONFIG_COSA=m -CONFIG_LANMEDIA=m -CONFIG_SEALEVEL_4021=m -CONFIG_HDLC=m -CONFIG_HDLC_RAW=m -CONFIG_HDLC_RAW_ETH=m -CONFIG_HDLC_CISCO=m -CONFIG_HDLC_FR=m -CONFIG_HDLC_PPP=m - -# -# X.25/LAPB support is disabled -# -CONFIG_PCI200SYN=m -CONFIG_WANXL=m -# CONFIG_PC300TOO is not set -CONFIG_N2=m -CONFIG_C101=m -CONFIG_FARSYNC=m -CONFIG_DSCC4=m -# CONFIG_DSCC4_PCISYNC is not set -# CONFIG_DSCC4_PCI_RST is not set -CONFIG_DLCI=m -CONFIG_DLCI_MAX=8 -CONFIG_SDLA=m -CONFIG_SBNI=m -# CONFIG_SBNI_MULTILINE is not set -CONFIG_IEEE802154_DRIVERS=m -CONFIG_IEEE802154_FAKELB=m -CONFIG_IEEE802154_ATUSB=m -CONFIG_XEN_NETDEV_FRONTEND=y -CONFIG_XEN_NETDEV_BACKEND=y -CONFIG_VMXNET3=m -CONFIG_FUJITSU_ES=m -CONFIG_HYPERV_NET=m -CONFIG_ISDN=y -CONFIG_ISDN_I4L=m -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_IPPP_FILTER=y -CONFIG_ISDN_PPP_BSDCOMP=m -CONFIG_ISDN_AUDIO=y -CONFIG_ISDN_TTY_FAX=y - -# -# ISDN feature submodules -# -CONFIG_ISDN_DIVERSION=m - -# -# ISDN4Linux hardware drivers -# - -# -# Passive cards -# -CONFIG_ISDN_DRV_HISAX=m - -# -# D-channel protocol features -# -CONFIG_HISAX_EURO=y -CONFIG_DE_AOC=y -CONFIG_HISAX_NO_SENDCOMPLETE=y -CONFIG_HISAX_NO_LLC=y -CONFIG_HISAX_NO_KEYPAD=y -CONFIG_HISAX_1TR6=y -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 - -# -# HiSax supported cards -# -CONFIG_HISAX_16_0=y -CONFIG_HISAX_16_3=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_AVM_A1=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_IX1MICROR2=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_ASUSCOM=y -CONFIG_HISAX_TELEINT=y -CONFIG_HISAX_HFCS=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_SPORTSTER=y -CONFIG_HISAX_MIC=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_ISURF=y -CONFIG_HISAX_HSTSAPHIR=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -# CONFIG_HISAX_DEBUG is not set - -# -# HiSax PCMCIA card service modules -# -CONFIG_HISAX_SEDLBAUER_CS=m -CONFIG_HISAX_ELSA_CS=m -CONFIG_HISAX_AVM_A1_CS=m -CONFIG_HISAX_TELES_CS=m - -# -# HiSax sub driver modules -# -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_HFCUSB=m -CONFIG_HISAX_HFC4S8S=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active cards -# -CONFIG_ISDN_DRV_ICN=m -CONFIG_ISDN_DRV_PCBIT=m -CONFIG_ISDN_DRV_SC=m -CONFIG_ISDN_DRV_ACT2000=m -CONFIG_ISDN_CAPI=m -CONFIG_CAPI_TRACE=y -CONFIG_ISDN_CAPI_CAPI20=m -CONFIG_ISDN_CAPI_MIDDLEWARE=y -CONFIG_ISDN_CAPI_CAPIDRV=m -# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set - -# -# CAPI hardware drivers -# -CONFIG_CAPI_AVM=y -CONFIG_ISDN_DRV_AVMB1_B1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_T1ISA=m -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -CONFIG_ISDN_DRV_AVMB1_AVM_CS=m -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_CAPI_EICON=y -CONFIG_ISDN_DIVAS=m -CONFIG_ISDN_DIVAS_BRIPCI=y -CONFIG_ISDN_DIVAS_PRIPCI=y -CONFIG_ISDN_DIVAS_DIVACAPI=m -CONFIG_ISDN_DIVAS_USERIDI=m -CONFIG_ISDN_DIVAS_MAINT=m -CONFIG_ISDN_DRV_GIGASET=m -# CONFIG_GIGASET_CAPI is not set -CONFIG_GIGASET_I4L=y -# CONFIG_GIGASET_DUMMYLL is not set -CONFIG_GIGASET_BASE=m -CONFIG_GIGASET_M105=m -# CONFIG_GIGASET_M101 is not set -# CONFIG_GIGASET_DEBUG is not set -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y -CONFIG_MISDN=m -CONFIG_MISDN_DSP=m -CONFIG_MISDN_L1OIP=m - -# -# mISDN hardware drivers -# -CONFIG_MISDN_HFCPCI=m -CONFIG_MISDN_HFCMULTI=m -CONFIG_MISDN_HFCUSB=m -CONFIG_MISDN_AVMFRITZ=m -CONFIG_MISDN_SPEEDFAX=m -CONFIG_MISDN_INFINEON=m -CONFIG_MISDN_W6692=m -CONFIG_MISDN_NETJET=m -CONFIG_MISDN_IPAC=m -CONFIG_MISDN_ISAR=m -CONFIG_ISDN_HDLC=m -CONFIG_NVM=y -# CONFIG_NVM_DEBUG is not set -# CONFIG_NVM_GENNVM is not set -# CONFIG_NVM_RRPC is not set - -# -# Input device support -# -CONFIG_INPUT=y -CONFIG_INPUT_LEDS=y -CONFIG_INPUT_FF_MEMLESS=y -CONFIG_INPUT_POLLDEV=m -CONFIG_INPUT_SPARSEKMAP=m -CONFIG_INPUT_MATRIXKMAP=m - -# -# Userland interfaces -# -CONFIG_INPUT_MOUSEDEV=y -CONFIG_INPUT_MOUSEDEV_PSAUX=y -CONFIG_INPUT_MOUSEDEV_SCREEN_X=1024 -CONFIG_INPUT_MOUSEDEV_SCREEN_Y=768 -CONFIG_INPUT_JOYDEV=m -CONFIG_INPUT_EVDEV=m -# CONFIG_INPUT_EVBUG is not set - -# -# Input Device Drivers -# -CONFIG_INPUT_KEYBOARD=y -CONFIG_KEYBOARD_ADP5588=m -CONFIG_KEYBOARD_ADP5589=m -CONFIG_KEYBOARD_ATKBD=y -CONFIG_KEYBOARD_QT1070=m -CONFIG_KEYBOARD_QT2160=m -# CONFIG_KEYBOARD_LKKBD is not set -CONFIG_KEYBOARD_GPIO=m -CONFIG_KEYBOARD_GPIO_POLLED=m -CONFIG_KEYBOARD_TCA6416=m -CONFIG_KEYBOARD_TCA8418=m -CONFIG_KEYBOARD_MATRIX=m -CONFIG_KEYBOARD_LM8323=m -CONFIG_KEYBOARD_LM8333=m -CONFIG_KEYBOARD_MAX7359=m -CONFIG_KEYBOARD_MCS=m -CONFIG_KEYBOARD_MPR121=m -# CONFIG_KEYBOARD_NEWTON is not set -CONFIG_KEYBOARD_OPENCORES=m -CONFIG_KEYBOARD_SAMSUNG=m -CONFIG_KEYBOARD_STOWAWAY=m -# CONFIG_KEYBOARD_SUNKBD is not set -# CONFIG_KEYBOARD_XTKBD is not set -CONFIG_KEYBOARD_CROS_EC=m -CONFIG_INPUT_MOUSE=y -CONFIG_MOUSE_PS2=m -CONFIG_MOUSE_PS2_ALPS=y -CONFIG_MOUSE_PS2_LOGIPS2PP=y -CONFIG_MOUSE_PS2_SYNAPTICS=y -CONFIG_MOUSE_PS2_CYPRESS=y -CONFIG_MOUSE_PS2_LIFEBOOK=y -CONFIG_MOUSE_PS2_TRACKPOINT=y -CONFIG_MOUSE_PS2_ELANTECH=y -CONFIG_MOUSE_PS2_SENTELIC=y -CONFIG_MOUSE_PS2_TOUCHKIT=y -CONFIG_MOUSE_PS2_FOCALTECH=y -CONFIG_MOUSE_PS2_VMMOUSE=y -CONFIG_MOUSE_SERIAL=m -CONFIG_MOUSE_APPLETOUCH=m -CONFIG_MOUSE_BCM5974=m -CONFIG_MOUSE_CYAPA=m -CONFIG_MOUSE_ELAN_I2C=m -CONFIG_MOUSE_ELAN_I2C_I2C=y -CONFIG_MOUSE_ELAN_I2C_SMBUS=y -CONFIG_MOUSE_INPORT=m -CONFIG_MOUSE_ATIXL=y -CONFIG_MOUSE_LOGIBM=m -CONFIG_MOUSE_PC110PAD=m -CONFIG_MOUSE_VSXXXAA=m -CONFIG_MOUSE_GPIO=m -CONFIG_MOUSE_SYNAPTICS_I2C=m -CONFIG_MOUSE_SYNAPTICS_USB=m -CONFIG_INPUT_JOYSTICK=y -CONFIG_JOYSTICK_ANALOG=m -CONFIG_JOYSTICK_A3D=m -CONFIG_JOYSTICK_ADI=m -CONFIG_JOYSTICK_COBRA=m -CONFIG_JOYSTICK_GF2K=m -CONFIG_JOYSTICK_GRIP=m -CONFIG_JOYSTICK_GRIP_MP=m -CONFIG_JOYSTICK_GUILLEMOT=m -CONFIG_JOYSTICK_INTERACT=m -CONFIG_JOYSTICK_SIDEWINDER=m -CONFIG_JOYSTICK_TMDC=m -CONFIG_JOYSTICK_IFORCE=m -CONFIG_JOYSTICK_IFORCE_USB=y -CONFIG_JOYSTICK_IFORCE_232=y -CONFIG_JOYSTICK_WARRIOR=m -CONFIG_JOYSTICK_MAGELLAN=m -CONFIG_JOYSTICK_SPACEORB=m -CONFIG_JOYSTICK_SPACEBALL=m -CONFIG_JOYSTICK_STINGER=m -CONFIG_JOYSTICK_TWIDJOY=m -CONFIG_JOYSTICK_ZHENHUA=m -CONFIG_JOYSTICK_DB9=m -CONFIG_JOYSTICK_GAMECON=m -CONFIG_JOYSTICK_TURBOGRAFX=m -CONFIG_JOYSTICK_AS5011=m -CONFIG_JOYSTICK_JOYDUMP=m -CONFIG_JOYSTICK_XPAD=m -CONFIG_JOYSTICK_XPAD_FF=y -CONFIG_JOYSTICK_XPAD_LEDS=y -CONFIG_JOYSTICK_WALKERA0701=m -CONFIG_INPUT_TABLET=y -CONFIG_TABLET_USB_ACECAD=m -CONFIG_TABLET_USB_AIPTEK=m -CONFIG_TABLET_USB_GTCO=m -CONFIG_TABLET_USB_HANWANG=m -CONFIG_TABLET_USB_KBTAB=m -CONFIG_TABLET_SERIAL_WACOM4=m -CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_PROPERTIES=y -CONFIG_TOUCHSCREEN_AD7879=m -CONFIG_TOUCHSCREEN_AD7879_I2C=m -CONFIG_TOUCHSCREEN_ATMEL_MXT=m -CONFIG_TOUCHSCREEN_AUO_PIXCIR=m -CONFIG_TOUCHSCREEN_BU21013=m -CONFIG_TOUCHSCREEN_CY8CTMG110=m -CONFIG_TOUCHSCREEN_CYTTSP_CORE=m -CONFIG_TOUCHSCREEN_CYTTSP_I2C=m -CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m -CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m -CONFIG_TOUCHSCREEN_DYNAPRO=m -CONFIG_TOUCHSCREEN_HAMPSHIRE=m -CONFIG_TOUCHSCREEN_EETI=m -CONFIG_TOUCHSCREEN_FT6236=m -CONFIG_TOUCHSCREEN_FUJITSU=m -CONFIG_TOUCHSCREEN_GOODIX=m -CONFIG_TOUCHSCREEN_ILI210X=m -CONFIG_TOUCHSCREEN_GUNZE=m -CONFIG_TOUCHSCREEN_ELAN=m -CONFIG_TOUCHSCREEN_ELO=m -CONFIG_TOUCHSCREEN_WACOM_W8001=m -CONFIG_TOUCHSCREEN_WACOM_I2C=m -CONFIG_TOUCHSCREEN_MAX11801=m -CONFIG_TOUCHSCREEN_MCS5000=m -CONFIG_TOUCHSCREEN_MMS114=m -CONFIG_TOUCHSCREEN_MTOUCH=m -CONFIG_TOUCHSCREEN_INEXIO=m -CONFIG_TOUCHSCREEN_MK712=m -CONFIG_TOUCHSCREEN_HTCPEN=m -CONFIG_TOUCHSCREEN_PENMOUNT=m -CONFIG_TOUCHSCREEN_EDT_FT5X06=m -CONFIG_TOUCHSCREEN_TOUCHRIGHT=m -CONFIG_TOUCHSCREEN_TOUCHWIN=m -CONFIG_TOUCHSCREEN_TI_AM335X_TSC=m -CONFIG_TOUCHSCREEN_UCB1400=m -CONFIG_TOUCHSCREEN_PIXCIR=m -CONFIG_TOUCHSCREEN_WDT87XX_I2C=m -CONFIG_TOUCHSCREEN_WM97XX=m -CONFIG_TOUCHSCREEN_WM9705=y -CONFIG_TOUCHSCREEN_WM9712=y -CONFIG_TOUCHSCREEN_WM9713=y -CONFIG_TOUCHSCREEN_USB_COMPOSITE=m -CONFIG_TOUCHSCREEN_MC13783=m -CONFIG_TOUCHSCREEN_USB_EGALAX=y -CONFIG_TOUCHSCREEN_USB_PANJIT=y -CONFIG_TOUCHSCREEN_USB_3M=y -CONFIG_TOUCHSCREEN_USB_ITM=y -CONFIG_TOUCHSCREEN_USB_ETURBO=y -CONFIG_TOUCHSCREEN_USB_GUNZE=y -CONFIG_TOUCHSCREEN_USB_DMC_TSC10=y -CONFIG_TOUCHSCREEN_USB_IRTOUCH=y -CONFIG_TOUCHSCREEN_USB_IDEALTEK=y -CONFIG_TOUCHSCREEN_USB_GENERAL_TOUCH=y -CONFIG_TOUCHSCREEN_USB_GOTOP=y -CONFIG_TOUCHSCREEN_USB_JASTEC=y -CONFIG_TOUCHSCREEN_USB_ELO=y -CONFIG_TOUCHSCREEN_USB_E2I=y -CONFIG_TOUCHSCREEN_USB_ZYTRONIC=y -CONFIG_TOUCHSCREEN_USB_ETT_TC45USB=y -CONFIG_TOUCHSCREEN_USB_NEXIO=y -CONFIG_TOUCHSCREEN_USB_EASYTOUCH=y -CONFIG_TOUCHSCREEN_TOUCHIT213=m -CONFIG_TOUCHSCREEN_TSC_SERIO=m -CONFIG_TOUCHSCREEN_TSC200X_CORE=m -CONFIG_TOUCHSCREEN_TSC2004=m -CONFIG_TOUCHSCREEN_TSC2007=m -CONFIG_TOUCHSCREEN_ST1232=m -CONFIG_TOUCHSCREEN_SUR40=m -CONFIG_TOUCHSCREEN_SX8654=m -CONFIG_TOUCHSCREEN_TPS6507X=m -CONFIG_TOUCHSCREEN_ZFORCE=m -CONFIG_TOUCHSCREEN_ROHM_BU21023=m -CONFIG_INPUT_MISC=y -CONFIG_INPUT_AD714X=m -CONFIG_INPUT_AD714X_I2C=m -CONFIG_INPUT_BMA150=m -CONFIG_INPUT_E3X0_BUTTON=m -CONFIG_INPUT_PCSPKR=m -CONFIG_INPUT_MC13783_PWRBUTTON=m -CONFIG_INPUT_MMA8450=m -CONFIG_INPUT_MPU3050=m -CONFIG_INPUT_APANEL=m -CONFIG_INPUT_GP2A=m -CONFIG_INPUT_GPIO_BEEPER=m -CONFIG_INPUT_GPIO_TILT_POLLED=m -CONFIG_INPUT_WISTRON_BTNS=m -CONFIG_INPUT_ATLAS_BTNS=m -CONFIG_INPUT_ATI_REMOTE2=m -CONFIG_INPUT_KEYSPAN_REMOTE=m -CONFIG_INPUT_KXTJ9=m -CONFIG_INPUT_KXTJ9_POLLED_MODE=y -CONFIG_INPUT_POWERMATE=m -CONFIG_INPUT_YEALINK=m -CONFIG_INPUT_CM109=m -CONFIG_INPUT_REGULATOR_HAPTIC=m -CONFIG_INPUT_RETU_PWRBUTTON=m -CONFIG_INPUT_TPS65218_PWRBUTTON=m -CONFIG_INPUT_UINPUT=m -CONFIG_INPUT_PCF50633_PMU=m -CONFIG_INPUT_PCF8574=m -CONFIG_INPUT_GPIO_ROTARY_ENCODER=m -CONFIG_INPUT_ADXL34X=m -CONFIG_INPUT_ADXL34X_I2C=m -CONFIG_INPUT_IMS_PCU=m -CONFIG_INPUT_CMA3000=m -CONFIG_INPUT_CMA3000_I2C=m -CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y -CONFIG_INPUT_IDEAPAD_SLIDEBAR=m -CONFIG_INPUT_SOC_BUTTON_ARRAY=m -CONFIG_INPUT_DRV260X_HAPTICS=m -CONFIG_INPUT_DRV2665_HAPTICS=m -CONFIG_INPUT_DRV2667_HAPTICS=m - -# -# Hardware I/O ports -# -CONFIG_SERIO=y -CONFIG_ARCH_MIGHT_HAVE_PC_SERIO=y -CONFIG_SERIO_I8042=y -CONFIG_SERIO_SERPORT=m -CONFIG_SERIO_CT82C710=m -CONFIG_SERIO_PARKBD=m -CONFIG_SERIO_PCIPS2=m -CONFIG_SERIO_LIBPS2=y -CONFIG_SERIO_RAW=m -CONFIG_SERIO_ALTERA_PS2=m -CONFIG_SERIO_PS2MULT=m -CONFIG_SERIO_ARC_PS2=m -CONFIG_HYPERV_KEYBOARD=m -CONFIG_USERIO=m -CONFIG_GAMEPORT=m -CONFIG_GAMEPORT_NS558=m -CONFIG_GAMEPORT_L4=m -CONFIG_GAMEPORT_EMU10K1=m -CONFIG_GAMEPORT_FM801=m - -# -# Character devices -# -CONFIG_TTY=y -CONFIG_VT=y -CONFIG_CONSOLE_TRANSLATIONS=y -CONFIG_VT_CONSOLE=y -CONFIG_VT_CONSOLE_SLEEP=y -CONFIG_HW_CONSOLE=y -CONFIG_VT_HW_CONSOLE_BINDING=y -CONFIG_UNIX98_PTYS=y -CONFIG_DEVPTS_MULTIPLE_INSTANCES=y -CONFIG_LEGACY_PTYS=y -CONFIG_LEGACY_PTY_COUNT=32 -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -# CONFIG_CYZ_INTR is not set -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_SYNCLINK_GT=m -CONFIG_NOZOMI=m -CONFIG_ISI=m -CONFIG_N_HDLC=m -CONFIG_N_GSM=m -CONFIG_TRACE_ROUTER=m -CONFIG_TRACE_SINK=m -CONFIG_LDISC_AUTOLOAD=y -CONFIG_DEVMEM=y -CONFIG_DEVKMEM=y - -# -# Serial drivers -# -CONFIG_SERIAL_EARLYCON=y -CONFIG_SERIAL_8250=y -# CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set -CONFIG_SERIAL_8250_PNP=y -CONFIG_SERIAL_8250_CONSOLE=y -CONFIG_SERIAL_8250_DMA=y -CONFIG_SERIAL_8250_PCI=y -CONFIG_SERIAL_8250_CS=m -CONFIG_SERIAL_8250_NR_UARTS=4 -CONFIG_SERIAL_8250_RUNTIME_UARTS=4 -CONFIG_SERIAL_8250_EXTENDED=y -CONFIG_SERIAL_8250_MANY_PORTS=y -CONFIG_SERIAL_8250_FOURPORT=m -CONFIG_SERIAL_8250_ACCENT=m -CONFIG_SERIAL_8250_BOCA=m -CONFIG_SERIAL_8250_EXAR_ST16C554=m -CONFIG_SERIAL_8250_HUB6=m -CONFIG_SERIAL_8250_SHARE_IRQ=y -CONFIG_SERIAL_8250_DETECT_IRQ=y -CONFIG_SERIAL_8250_RSA=y -# CONFIG_SERIAL_8250_FSL is not set -CONFIG_SERIAL_8250_DW=m -CONFIG_SERIAL_8250_RT288X=y -CONFIG_SERIAL_8250_FINTEK=m -CONFIG_SERIAL_8250_MID=m - -# -# Non-8250 serial port support -# -CONFIG_SERIAL_UARTLITE=m -CONFIG_SERIAL_CORE=y -CONFIG_SERIAL_CORE_CONSOLE=y -CONFIG_SERIAL_JSM=m -CONFIG_SERIAL_SCCNXP=m -CONFIG_SERIAL_SC16IS7XX=m -# CONFIG_SERIAL_SC16IS7XX_I2C is not set -CONFIG_SERIAL_TIMBERDALE=m -CONFIG_SERIAL_ALTERA_JTAGUART=m -CONFIG_SERIAL_ALTERA_UART=m -CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4 -CONFIG_SERIAL_ALTERA_UART_BAUDRATE=115200 -CONFIG_SERIAL_PCH_UART=m -CONFIG_SERIAL_ARC=m -CONFIG_SERIAL_ARC_NR_PORTS=1 -CONFIG_SERIAL_RP2=m -CONFIG_SERIAL_RP2_NR_UARTS=32 -CONFIG_SERIAL_FSL_LPUART=m -# CONFIG_TTY_PRINTK is not set -CONFIG_PRINTER=m -CONFIG_LP_CONSOLE=y -CONFIG_PPDEV=m -CONFIG_HVC_DRIVER=y -CONFIG_HVC_IRQ=y -CONFIG_HVC_XEN=y -CONFIG_HVC_XEN_FRONTEND=y -CONFIG_VIRTIO_CONSOLE=m -CONFIG_IPMI_HANDLER=m -# CONFIG_IPMI_PANIC_EVENT is not set -CONFIG_IPMI_DEVICE_INTERFACE=m -CONFIG_IPMI_SI=m -# CONFIG_IPMI_SI_PROBE_DEFAULTS is not set -CONFIG_IPMI_SSIF=m -CONFIG_IPMI_WATCHDOG=m -CONFIG_IPMI_POWEROFF=m -CONFIG_HW_RANDOM=y -CONFIG_HW_RANDOM_TIMERIOMEM=m -CONFIG_HW_RANDOM_INTEL=m -CONFIG_HW_RANDOM_AMD=m -CONFIG_HW_RANDOM_GEODE=m -CONFIG_HW_RANDOM_VIA=m -CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_HW_RANDOM_TPM=m -CONFIG_NVRAM=m -CONFIG_DTLK=m -CONFIG_APPLICOM=m -CONFIG_SONYPI=m - -# -# PCMCIA character devices -# -CONFIG_SYNCLINK_CS=m -CONFIG_CARDMAN_4000=m -CONFIG_CARDMAN_4040=m -CONFIG_IPWIRELESS=m -CONFIG_MWAVE=m -CONFIG_SCx200_GPIO=m -CONFIG_PC8736x_GPIO=m -CONFIG_NSC_GPIO=m -CONFIG_RAW_DRIVER=m -CONFIG_MAX_RAW_DEVS=256 -CONFIG_HPET=y -CONFIG_HPET_MMAP=y -CONFIG_HPET_MMAP_DEFAULT=y -CONFIG_HANGCHECK_TIMER=m -CONFIG_TCG_TPM=m -CONFIG_TCG_TIS=m -CONFIG_TCG_TIS_I2C_ATMEL=m -CONFIG_TCG_TIS_I2C_INFINEON=m -CONFIG_TCG_TIS_I2C_NUVOTON=m -CONFIG_TCG_NSC=m -CONFIG_TCG_ATMEL=m -CONFIG_TCG_INFINEON=m -# CONFIG_TCG_XEN is not set -CONFIG_TCG_CRB=m -CONFIG_TCG_TIS_ST33ZP24=m -CONFIG_TCG_TIS_ST33ZP24_I2C=m -CONFIG_TELCLOCK=m -CONFIG_DEVPORT=y -# CONFIG_XILLYBUS is not set - -# -# I2C support -# -CONFIG_I2C=m -CONFIG_I2C_BOARDINFO=y -CONFIG_I2C_COMPAT=y -CONFIG_I2C_CHARDEV=m -CONFIG_I2C_MUX=m - -# -# Multiplexer I2C Chip support -# -CONFIG_I2C_MUX_GPIO=m -CONFIG_I2C_MUX_PCA9541=m -CONFIG_I2C_MUX_PCA954x=m -CONFIG_I2C_MUX_PINCTRL=m -CONFIG_I2C_MUX_REG=m -CONFIG_I2C_HELPER_AUTO=y -CONFIG_I2C_SMBUS=m -CONFIG_I2C_ALGOBIT=m -CONFIG_I2C_ALGOPCA=m - -# -# I2C Hardware Bus support -# - -# -# PC SMBus host controller drivers -# -CONFIG_I2C_ALI1535=m -CONFIG_I2C_ALI1563=m -CONFIG_I2C_ALI15X3=m -CONFIG_I2C_AMD756=m -CONFIG_I2C_AMD756_S4882=m -CONFIG_I2C_AMD8111=m -CONFIG_I2C_I801=m -CONFIG_I2C_ISCH=m -CONFIG_I2C_ISMT=m -CONFIG_I2C_PIIX4=m -CONFIG_I2C_NFORCE2=m -CONFIG_I2C_NFORCE2_S4985=m -CONFIG_I2C_SIS5595=m -CONFIG_I2C_SIS630=m -CONFIG_I2C_SIS96X=m -CONFIG_I2C_VIA=m -CONFIG_I2C_VIAPRO=m - -# -# ACPI drivers -# -CONFIG_I2C_SCMI=m - -# -# I2C system bus drivers (mostly embedded / system-on-chip) -# -# CONFIG_I2C_CBUS_GPIO is not set -CONFIG_I2C_DESIGNWARE_CORE=m -CONFIG_I2C_DESIGNWARE_PLATFORM=m -CONFIG_I2C_DESIGNWARE_PCI=m -CONFIG_I2C_EG20T=m -CONFIG_I2C_EMEV2=m -CONFIG_I2C_GPIO=m -CONFIG_I2C_OCORES=m -CONFIG_I2C_PCA_PLATFORM=m -# CONFIG_I2C_PXA_PCI is not set -CONFIG_I2C_SIMTEC=m -CONFIG_I2C_XILINX=m - -# -# External I2C/SMBus adapter drivers -# -CONFIG_I2C_DIOLAN_U2C=m -CONFIG_I2C_DLN2=m -CONFIG_I2C_PARPORT=m -CONFIG_I2C_PARPORT_LIGHT=m -CONFIG_I2C_ROBOTFUZZ_OSIF=m -CONFIG_I2C_TAOS_EVM=m -CONFIG_I2C_TINY_USB=m -CONFIG_I2C_VIPERBOARD=m - -# -# Other I2C/SMBus bus drivers -# -CONFIG_I2C_PCA_ISA=m -CONFIG_I2C_CROS_EC_TUNNEL=m -CONFIG_SCx200_ACB=m -CONFIG_I2C_STUB=m -CONFIG_I2C_SLAVE=y -CONFIG_I2C_SLAVE_EEPROM=m -# CONFIG_I2C_DEBUG_CORE is not set -# CONFIG_I2C_DEBUG_ALGO is not set -# CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_SPI is not set -# CONFIG_SPMI is not set -CONFIG_HSI=m -CONFIG_HSI_BOARDINFO=y - -# -# HSI controllers -# - -# -# HSI clients -# -CONFIG_HSI_CHAR=m - -# -# PPS support -# -CONFIG_PPS=m -# CONFIG_PPS_DEBUG is not set - -# -# PPS clients support -# -# CONFIG_PPS_CLIENT_KTIMER is not set -CONFIG_PPS_CLIENT_LDISC=m -CONFIG_PPS_CLIENT_PARPORT=m -CONFIG_PPS_CLIENT_GPIO=m - -# -# PPS generators support -# - -# -# PTP clock support -# -CONFIG_PTP_1588_CLOCK=m - -# -# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. -# -CONFIG_PTP_1588_CLOCK_PCH=m -CONFIG_PINCTRL=y - -# -# Pin controllers -# -CONFIG_PINMUX=y -CONFIG_PINCONF=y -CONFIG_GENERIC_PINCONF=y -# CONFIG_DEBUG_PINCTRL is not set -CONFIG_PINCTRL_AMD=y -CONFIG_PINCTRL_BAYTRAIL=y -CONFIG_PINCTRL_CHERRYVIEW=m -CONFIG_PINCTRL_INTEL=m -CONFIG_PINCTRL_BROXTON=m -CONFIG_PINCTRL_SUNRISEPOINT=m -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y -CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y -CONFIG_GPIO_ACPI=y -CONFIG_GPIOLIB_IRQCHIP=y -# CONFIG_DEBUG_GPIO is not set -CONFIG_GPIO_SYSFS=y -CONFIG_GPIO_GENERIC=m -CONFIG_GPIO_MAX730X=m - -# -# Memory mapped GPIO drivers -# -# CONFIG_GPIO_AMDPT is not set -CONFIG_GPIO_DWAPB=m -CONFIG_GPIO_GENERIC_PLATFORM=m -CONFIG_GPIO_ICH=m -CONFIG_GPIO_LYNXPOINT=y -CONFIG_GPIO_VX855=m -# CONFIG_GPIO_ZX is not set - -# -# Port-mapped I/O GPIO drivers -# -# CONFIG_GPIO_104_IDIO_16 is not set -CONFIG_GPIO_F7188X=m -# CONFIG_GPIO_IT87 is not set -CONFIG_GPIO_SCH=m -CONFIG_GPIO_SCH311X=m - -# -# I2C GPIO expanders -# -CONFIG_GPIO_ADP5588=m -CONFIG_GPIO_MAX7300=m -CONFIG_GPIO_MAX732X=m -CONFIG_GPIO_PCA953X=m -CONFIG_GPIO_PCF857X=m - -# -# MFD GPIO expanders -# -CONFIG_GPIO_ARIZONA=m -CONFIG_GPIO_CS5535=m -CONFIG_GPIO_DLN2=m -CONFIG_GPIO_JANZ_TTL=m -CONFIG_GPIO_LP3943=m -# CONFIG_GPIO_TIMBERDALE is not set -# CONFIG_GPIO_UCB1400 is not set -CONFIG_GPIO_WM8994=m - -# -# PCI GPIO expanders -# -CONFIG_GPIO_AMD8111=m -# CONFIG_GPIO_INTEL_MID is not set -CONFIG_GPIO_ML_IOH=m -CONFIG_GPIO_PCH=m -CONFIG_GPIO_RDC321X=m - -# -# SPI or I2C GPIO expanders -# -# CONFIG_GPIO_MCP23S08 is not set - -# -# USB GPIO expanders -# -CONFIG_GPIO_VIPERBOARD=m -CONFIG_W1=m -CONFIG_W1_CON=y - -# -# 1-wire Bus Masters -# -CONFIG_W1_MASTER_MATROX=m -CONFIG_W1_MASTER_DS2490=m -CONFIG_W1_MASTER_DS2482=m -CONFIG_W1_MASTER_DS1WM=m -CONFIG_W1_MASTER_GPIO=m - -# -# 1-wire Slaves -# -CONFIG_W1_SLAVE_THERM=m -CONFIG_W1_SLAVE_SMEM=m -CONFIG_W1_SLAVE_DS2408=m -# CONFIG_W1_SLAVE_DS2408_READBACK is not set -CONFIG_W1_SLAVE_DS2413=m -CONFIG_W1_SLAVE_DS2406=m -CONFIG_W1_SLAVE_DS2423=m -CONFIG_W1_SLAVE_DS2431=m -CONFIG_W1_SLAVE_DS2433=m -CONFIG_W1_SLAVE_DS2433_CRC=y -CONFIG_W1_SLAVE_DS2760=m -CONFIG_W1_SLAVE_DS2780=m -CONFIG_W1_SLAVE_DS2781=m -CONFIG_W1_SLAVE_DS28E04=m -CONFIG_W1_SLAVE_BQ27000=m -CONFIG_POWER_SUPPLY=y -# CONFIG_POWER_SUPPLY_DEBUG is not set -CONFIG_PDA_POWER=m -CONFIG_GENERIC_ADC_BATTERY=m -CONFIG_TEST_POWER=m -CONFIG_BATTERY_DS2760=m -CONFIG_BATTERY_DS2780=m -CONFIG_BATTERY_DS2781=m -CONFIG_BATTERY_DS2782=m -CONFIG_BATTERY_SBS=m -CONFIG_BATTERY_BQ27XXX=m -CONFIG_BATTERY_BQ27XXX_I2C=y -CONFIG_BATTERY_BQ27XXX_PLATFORM=y -CONFIG_BATTERY_MAX17040=m -CONFIG_BATTERY_MAX17042=m -CONFIG_CHARGER_PCF50633=m -CONFIG_CHARGER_MAX8903=m -CONFIG_CHARGER_LP8727=m -CONFIG_CHARGER_GPIO=m -# CONFIG_CHARGER_MANAGER is not set -CONFIG_CHARGER_BQ2415X=m -CONFIG_CHARGER_BQ24190=m -CONFIG_CHARGER_BQ24257=m -CONFIG_CHARGER_BQ24735=m -CONFIG_CHARGER_BQ25890=m -CONFIG_CHARGER_SMB347=m -CONFIG_CHARGER_TPS65217=m -CONFIG_BATTERY_GAUGE_LTC2941=m -CONFIG_CHARGER_RT9455=m -CONFIG_POWER_RESET=y -# CONFIG_POWER_RESET_RESTART is not set -CONFIG_POWER_AVS=y -CONFIG_HWMON=m -CONFIG_HWMON_VID=m -# CONFIG_HWMON_DEBUG_CHIP is not set - -# -# Native drivers -# -CONFIG_SENSORS_ABITUGURU=m -CONFIG_SENSORS_ABITUGURU3=m -CONFIG_SENSORS_AD7414=m -CONFIG_SENSORS_AD7418=m -CONFIG_SENSORS_ADM1021=m -CONFIG_SENSORS_ADM1025=m -CONFIG_SENSORS_ADM1026=m -CONFIG_SENSORS_ADM1029=m -CONFIG_SENSORS_ADM1031=m -CONFIG_SENSORS_ADM9240=m -CONFIG_SENSORS_ADT7X10=m -CONFIG_SENSORS_ADT7410=m -CONFIG_SENSORS_ADT7411=m -CONFIG_SENSORS_ADT7462=m -CONFIG_SENSORS_ADT7470=m -CONFIG_SENSORS_ADT7475=m -CONFIG_SENSORS_ASC7621=m -CONFIG_SENSORS_K8TEMP=m -CONFIG_SENSORS_K10TEMP=m -CONFIG_SENSORS_FAM15H_POWER=m -CONFIG_SENSORS_APPLESMC=m -CONFIG_SENSORS_ASB100=m -CONFIG_SENSORS_ATXP1=m -CONFIG_SENSORS_DS620=m -CONFIG_SENSORS_DS1621=m -CONFIG_SENSORS_DELL_SMM=m -CONFIG_SENSORS_I5K_AMB=m -CONFIG_SENSORS_F71805F=m -CONFIG_SENSORS_F71882FG=m -CONFIG_SENSORS_F75375S=m -CONFIG_SENSORS_MC13783_ADC=m -CONFIG_SENSORS_FSCHMD=m -CONFIG_SENSORS_GL518SM=m -CONFIG_SENSORS_GL520SM=m -CONFIG_SENSORS_G760A=m -CONFIG_SENSORS_G762=m -CONFIG_SENSORS_GPIO_FAN=m -CONFIG_SENSORS_HIH6130=m -CONFIG_SENSORS_IBMAEM=m -CONFIG_SENSORS_IBMPEX=m -CONFIG_SENSORS_IIO_HWMON=m -CONFIG_SENSORS_I5500=m -CONFIG_SENSORS_CORETEMP=m -CONFIG_SENSORS_IT87=m -CONFIG_SENSORS_JC42=m -CONFIG_SENSORS_POWR1220=m -CONFIG_SENSORS_LINEAGE=m -CONFIG_SENSORS_LTC2945=m -CONFIG_SENSORS_LTC4151=m -CONFIG_SENSORS_LTC4215=m -CONFIG_SENSORS_LTC4222=m -CONFIG_SENSORS_LTC4245=m -CONFIG_SENSORS_LTC4260=m -CONFIG_SENSORS_LTC4261=m -CONFIG_SENSORS_MAX16065=m -CONFIG_SENSORS_MAX1619=m -CONFIG_SENSORS_MAX1668=m -CONFIG_SENSORS_MAX197=m -CONFIG_SENSORS_MAX6639=m -CONFIG_SENSORS_MAX6642=m -CONFIG_SENSORS_MAX6650=m -CONFIG_SENSORS_MAX6697=m -CONFIG_SENSORS_MAX31790=m -CONFIG_SENSORS_HTU21=m -CONFIG_SENSORS_MCP3021=m -CONFIG_SENSORS_MENF21BMC_HWMON=m -CONFIG_SENSORS_LM63=m -CONFIG_SENSORS_LM73=m -CONFIG_SENSORS_LM75=m -CONFIG_SENSORS_LM77=m -CONFIG_SENSORS_LM78=m -CONFIG_SENSORS_LM80=m -CONFIG_SENSORS_LM83=m -CONFIG_SENSORS_LM85=m -CONFIG_SENSORS_LM87=m -CONFIG_SENSORS_LM90=m -CONFIG_SENSORS_LM92=m -CONFIG_SENSORS_LM93=m -CONFIG_SENSORS_LM95234=m -CONFIG_SENSORS_LM95241=m -CONFIG_SENSORS_LM95245=m -CONFIG_SENSORS_PC87360=m -CONFIG_SENSORS_PC87427=m -CONFIG_SENSORS_NTC_THERMISTOR=m -CONFIG_SENSORS_NCT6683=m -CONFIG_SENSORS_NCT6775=m -CONFIG_SENSORS_NCT7802=m -CONFIG_SENSORS_NCT7904=m -CONFIG_SENSORS_PCF8591=m -CONFIG_PMBUS=m -CONFIG_SENSORS_PMBUS=m -CONFIG_SENSORS_ADM1275=m -CONFIG_SENSORS_LM25066=m -CONFIG_SENSORS_LTC2978=m -CONFIG_SENSORS_LTC2978_REGULATOR=y -CONFIG_SENSORS_MAX16064=m -CONFIG_SENSORS_MAX20751=m -CONFIG_SENSORS_MAX34440=m -CONFIG_SENSORS_MAX8688=m -CONFIG_SENSORS_TPS40422=m -CONFIG_SENSORS_UCD9000=m -CONFIG_SENSORS_UCD9200=m -CONFIG_SENSORS_ZL6100=m -CONFIG_SENSORS_SHT15=m -CONFIG_SENSORS_SHT21=m -CONFIG_SENSORS_SHTC1=m -CONFIG_SENSORS_SIS5595=m -CONFIG_SENSORS_DME1737=m -CONFIG_SENSORS_EMC1403=m -CONFIG_SENSORS_EMC2103=m -CONFIG_SENSORS_EMC6W201=m -CONFIG_SENSORS_SMSC47M1=m -CONFIG_SENSORS_SMSC47M192=m -CONFIG_SENSORS_SMSC47B397=m -CONFIG_SENSORS_SCH56XX_COMMON=m -CONFIG_SENSORS_SCH5627=m -CONFIG_SENSORS_SCH5636=m -CONFIG_SENSORS_SMM665=m -CONFIG_SENSORS_ADC128D818=m -CONFIG_SENSORS_ADS1015=m -CONFIG_SENSORS_ADS7828=m -CONFIG_SENSORS_AMC6821=m -CONFIG_SENSORS_INA209=m -CONFIG_SENSORS_INA2XX=m -CONFIG_SENSORS_TC74=m -CONFIG_SENSORS_THMC50=m -CONFIG_SENSORS_TMP102=m -CONFIG_SENSORS_TMP103=m -CONFIG_SENSORS_TMP401=m -CONFIG_SENSORS_TMP421=m -CONFIG_SENSORS_VIA_CPUTEMP=m -CONFIG_SENSORS_VIA686A=m -CONFIG_SENSORS_VT1211=m -CONFIG_SENSORS_VT8231=m -CONFIG_SENSORS_W83781D=m -CONFIG_SENSORS_W83791D=m -CONFIG_SENSORS_W83792D=m -CONFIG_SENSORS_W83793=m -CONFIG_SENSORS_W83795=m -# CONFIG_SENSORS_W83795_FANCTRL is not set -CONFIG_SENSORS_W83L785TS=m -CONFIG_SENSORS_W83L786NG=m -CONFIG_SENSORS_W83627HF=m -CONFIG_SENSORS_W83627EHF=m - -# -# ACPI drivers -# -CONFIG_SENSORS_ACPI_POWER=m -CONFIG_SENSORS_ATK0110=m -CONFIG_THERMAL=y -CONFIG_THERMAL_WRITABLE_TRIPS=y -CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y -# CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set -# CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set -# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set -CONFIG_THERMAL_GOV_FAIR_SHARE=y -CONFIG_THERMAL_GOV_STEP_WISE=y -CONFIG_THERMAL_GOV_BANG_BANG=y -CONFIG_THERMAL_GOV_USER_SPACE=y -CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y -CONFIG_THERMAL_EMULATION=y -CONFIG_INTEL_POWERCLAMP=m -CONFIG_X86_PKG_TEMP_THERMAL=m -CONFIG_INTEL_SOC_DTS_IOSF_CORE=m -CONFIG_INTEL_SOC_DTS_THERMAL=m -CONFIG_INT340X_THERMAL=m -CONFIG_ACPI_THERMAL_REL=m -CONFIG_INTEL_PCH_THERMAL=m -CONFIG_WATCHDOG=y -CONFIG_WATCHDOG_CORE=y -# CONFIG_WATCHDOG_NOWAYOUT is not set - -# -# Watchdog Device Drivers -# -CONFIG_SOFT_WATCHDOG=m -CONFIG_MENF21BMC_WATCHDOG=m -# CONFIG_XILINX_WATCHDOG is not set -CONFIG_CADENCE_WATCHDOG=m -CONFIG_DW_WATCHDOG=m -CONFIG_RN5T618_WATCHDOG=m -CONFIG_MAX63XX_WATCHDOG=m -CONFIG_RETU_WATCHDOG=m -CONFIG_ACQUIRE_WDT=m -CONFIG_ADVANTECH_WDT=m -CONFIG_ALIM1535_WDT=m -CONFIG_ALIM7101_WDT=m -CONFIG_F71808E_WDT=m -CONFIG_SP5100_TCO=m -CONFIG_GEODE_WDT=m -CONFIG_SBC_FITPC2_WATCHDOG=m -CONFIG_EUROTECH_WDT=m -CONFIG_IB700_WDT=m -CONFIG_IBMASR=m -CONFIG_WAFER_WDT=m -CONFIG_I6300ESB_WDT=m -CONFIG_IE6XX_WDT=m -CONFIG_ITCO_WDT=m -CONFIG_ITCO_VENDOR_SUPPORT=y -CONFIG_IT8712F_WDT=m -CONFIG_IT87_WDT=m -CONFIG_HP_WATCHDOG=m -CONFIG_HPWDT_NMI_DECODING=y -CONFIG_SC1200_WDT=m -CONFIG_SCx200_WDT=m -CONFIG_PC87413_WDT=m -CONFIG_NV_TCO=m -CONFIG_60XX_WDT=m -CONFIG_SBC8360_WDT=m -CONFIG_SBC7240_WDT=m -CONFIG_CPU5_WDT=m -CONFIG_SMSC_SCH311X_WDT=m -CONFIG_SMSC37B787_WDT=m -CONFIG_VIA_WDT=m -CONFIG_W83627HF_WDT=m -CONFIG_W83877F_WDT=m -CONFIG_W83977F_WDT=m -CONFIG_MACHZ_WDT=m -CONFIG_SBC_EPX_C3_WATCHDOG=m -CONFIG_BCM7038_WDT=m -CONFIG_MEN_A21_WDT=m -# CONFIG_XEN_WDT is not set - -# -# ISA-based Watchdog Cards -# -CONFIG_PCWATCHDOG=m -CONFIG_MIXCOMWD=m -CONFIG_WDT=m - -# -# PCI-based Watchdog Cards -# -CONFIG_PCIPCWATCHDOG=m -CONFIG_WDTPCI=m - -# -# USB-based Watchdog Cards -# -CONFIG_USBPCWATCHDOG=m -CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# -CONFIG_SSB=m -CONFIG_SSB_SPROM=y -CONFIG_SSB_BLOCKIO=y -CONFIG_SSB_PCIHOST_POSSIBLE=y -CONFIG_SSB_PCIHOST=y -CONFIG_SSB_B43_PCI_BRIDGE=y -CONFIG_SSB_PCMCIAHOST_POSSIBLE=y -CONFIG_SSB_PCMCIAHOST=y -CONFIG_SSB_SDIOHOST_POSSIBLE=y -CONFIG_SSB_SDIOHOST=y -CONFIG_SSB_HOST_SOC=y -# CONFIG_SSB_SILENT is not set -# CONFIG_SSB_DEBUG is not set -CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y -CONFIG_SSB_DRIVER_PCICORE=y -# CONFIG_SSB_DRIVER_GPIO is not set -CONFIG_BCMA_POSSIBLE=y - -# -# Broadcom specific AMBA -# -CONFIG_BCMA=m -CONFIG_BCMA_BLOCKIO=y -CONFIG_BCMA_HOST_PCI_POSSIBLE=y -CONFIG_BCMA_HOST_PCI=y -# CONFIG_BCMA_HOST_SOC is not set -CONFIG_BCMA_DRIVER_PCI=y -# CONFIG_BCMA_DRIVER_GMAC_CMN is not set -# CONFIG_BCMA_DRIVER_GPIO is not set -# CONFIG_BCMA_DEBUG is not set - -# -# Multifunction device drivers -# -CONFIG_MFD_CORE=y -CONFIG_MFD_CS5535=m -CONFIG_MFD_BCM590XX=m -CONFIG_MFD_CROS_EC=m -CONFIG_MFD_CROS_EC_I2C=m -CONFIG_MFD_DLN2=m -CONFIG_MFD_MC13XXX=m -CONFIG_MFD_MC13XXX_I2C=m -CONFIG_HTC_PASIC3=m -CONFIG_MFD_INTEL_QUARK_I2C_GPIO=m -CONFIG_LPC_ICH=m -CONFIG_LPC_SCH=m -CONFIG_MFD_INTEL_LPSS=m -CONFIG_MFD_INTEL_LPSS_ACPI=m -CONFIG_MFD_INTEL_LPSS_PCI=m -CONFIG_MFD_JANZ_CMODIO=m -# CONFIG_MFD_KEMPLD is not set -CONFIG_MFD_MT6397=m -CONFIG_MFD_MENF21BMC=m -CONFIG_MFD_VIPERBOARD=m -CONFIG_MFD_RETU=m -CONFIG_MFD_PCF50633=m -CONFIG_PCF50633_ADC=m -CONFIG_PCF50633_GPIO=m -CONFIG_UCB1400_CORE=m -CONFIG_MFD_RDC321X=m -CONFIG_MFD_RTSX_PCI=m -CONFIG_MFD_RTSX_USB=m -CONFIG_MFD_RN5T618=m -CONFIG_MFD_SI476X_CORE=m -CONFIG_MFD_SM501=m -# CONFIG_MFD_SM501_GPIO is not set -CONFIG_MFD_SKY81452=m -# CONFIG_ABX500_CORE is not set -CONFIG_MFD_SYSCON=y -CONFIG_MFD_TI_AM335X_TSCADC=m -CONFIG_MFD_LP3943=m -CONFIG_TPS6105X=m -CONFIG_TPS65010=m -CONFIG_TPS6507X=m -CONFIG_MFD_TPS65217=m -CONFIG_MFD_TPS65218=m -# CONFIG_MFD_TPS65912 is not set -CONFIG_MFD_WL1273_CORE=m -CONFIG_MFD_LM3533=m -CONFIG_MFD_TIMBERDALE=m -# CONFIG_MFD_TMIO is not set -CONFIG_MFD_VX855=m -CONFIG_MFD_ARIZONA=y -CONFIG_MFD_ARIZONA_I2C=m -CONFIG_MFD_WM5102=y -CONFIG_MFD_WM5110=y -CONFIG_MFD_WM8997=y -# CONFIG_MFD_WM8998 is not set -CONFIG_MFD_WM8994=m -CONFIG_REGULATOR=y -# CONFIG_REGULATOR_DEBUG is not set -CONFIG_REGULATOR_FIXED_VOLTAGE=m -# CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set -CONFIG_REGULATOR_USERSPACE_CONSUMER=m -CONFIG_REGULATOR_ACT8865=m -CONFIG_REGULATOR_AD5398=m -CONFIG_REGULATOR_ANATOP=m -CONFIG_REGULATOR_BCM590XX=m -CONFIG_REGULATOR_DA9210=m -CONFIG_REGULATOR_DA9211=m -CONFIG_REGULATOR_FAN53555=m -CONFIG_REGULATOR_GPIO=m -CONFIG_REGULATOR_ISL9305=m -CONFIG_REGULATOR_ISL6271A=m -CONFIG_REGULATOR_LP3971=m -CONFIG_REGULATOR_LP3972=m -CONFIG_REGULATOR_LP872X=m -CONFIG_REGULATOR_LP8755=m -CONFIG_REGULATOR_LTC3589=m -CONFIG_REGULATOR_MAX1586=m -CONFIG_REGULATOR_MAX8649=m -CONFIG_REGULATOR_MAX8660=m -CONFIG_REGULATOR_MAX8952=m -CONFIG_REGULATOR_MAX8973=m -CONFIG_REGULATOR_MC13XXX_CORE=m -CONFIG_REGULATOR_MC13783=m -CONFIG_REGULATOR_MC13892=m -CONFIG_REGULATOR_MT6311=m -CONFIG_REGULATOR_MT6397=m -CONFIG_REGULATOR_PCF50633=m -CONFIG_REGULATOR_PFUZE100=m -CONFIG_REGULATOR_RN5T618=m -CONFIG_REGULATOR_SKY81452=m -CONFIG_REGULATOR_TPS51632=m -CONFIG_REGULATOR_TPS6105X=m -CONFIG_REGULATOR_TPS62360=m -CONFIG_REGULATOR_TPS65023=m -CONFIG_REGULATOR_TPS6507X=m -CONFIG_REGULATOR_TPS65217=m -CONFIG_REGULATOR_WM8994=m -CONFIG_MEDIA_SUPPORT=m - -# -# Multimedia core support -# -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -CONFIG_MEDIA_RADIO_SUPPORT=y -# CONFIG_MEDIA_SDR_SUPPORT is not set -CONFIG_MEDIA_RC_SUPPORT=y -# CONFIG_MEDIA_CONTROLLER is not set -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2=m -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_TUNER=m -CONFIG_V4L2_MEM2MEM_DEV=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_DMA_SG=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_VIDEOBUF_DVB=m -CONFIG_VIDEOBUF2_CORE=m -CONFIG_VIDEOBUF2_MEMOPS=m -CONFIG_VIDEOBUF2_DMA_CONTIG=m -CONFIG_VIDEOBUF2_VMALLOC=m -CONFIG_VIDEOBUF2_DMA_SG=m -CONFIG_VIDEOBUF2_DVB=m -CONFIG_DVB_CORE=m -CONFIG_DVB_NET=y -CONFIG_TTPCI_EEPROM=m -CONFIG_DVB_MAX_ADAPTERS=8 -# CONFIG_DVB_DYNAMIC_MINORS is not set - -# -# Media drivers -# -CONFIG_RC_CORE=m -CONFIG_RC_MAP=m -CONFIG_RC_DECODERS=y -CONFIG_LIRC=m -CONFIG_IR_LIRC_CODEC=m -CONFIG_IR_NEC_DECODER=m -CONFIG_IR_RC5_DECODER=m -CONFIG_IR_RC6_DECODER=m -CONFIG_IR_JVC_DECODER=m -CONFIG_IR_SONY_DECODER=m -CONFIG_IR_SANYO_DECODER=m -CONFIG_IR_SHARP_DECODER=m -CONFIG_IR_MCE_KBD_DECODER=m -CONFIG_IR_XMP_DECODER=m -CONFIG_RC_DEVICES=y -CONFIG_RC_ATI_REMOTE=m -CONFIG_IR_ENE=m -CONFIG_IR_HIX5HD2=m -CONFIG_IR_IMON=m -CONFIG_IR_MCEUSB=m -CONFIG_IR_ITE_CIR=m -CONFIG_IR_FINTEK=m -CONFIG_IR_NUVOTON=m -CONFIG_IR_REDRAT3=m -CONFIG_IR_STREAMZAP=m -CONFIG_IR_WINBOND_CIR=m -CONFIG_IR_IGORPLUGUSB=m -CONFIG_IR_IGUANA=m -CONFIG_IR_TTUSBIR=m -CONFIG_RC_LOOPBACK=m -CONFIG_IR_GPIO_CIR=m -CONFIG_MEDIA_USB_SUPPORT=y - -# -# Webcam devices -# -CONFIG_USB_VIDEO_CLASS=m -CONFIG_USB_VIDEO_CLASS_INPUT_EVDEV=y -CONFIG_USB_GSPCA=m -CONFIG_USB_M5602=m -CONFIG_USB_STV06XX=m -CONFIG_USB_GL860=m -CONFIG_USB_GSPCA_BENQ=m -CONFIG_USB_GSPCA_CONEX=m -CONFIG_USB_GSPCA_CPIA1=m -CONFIG_USB_GSPCA_DTCS033=m -CONFIG_USB_GSPCA_ETOMS=m -CONFIG_USB_GSPCA_FINEPIX=m -CONFIG_USB_GSPCA_JEILINJ=m -CONFIG_USB_GSPCA_JL2005BCD=m -CONFIG_USB_GSPCA_KINECT=m -CONFIG_USB_GSPCA_KONICA=m -CONFIG_USB_GSPCA_MARS=m -CONFIG_USB_GSPCA_MR97310A=m -CONFIG_USB_GSPCA_NW80X=m -CONFIG_USB_GSPCA_OV519=m -CONFIG_USB_GSPCA_OV534=m -CONFIG_USB_GSPCA_OV534_9=m -CONFIG_USB_GSPCA_PAC207=m -CONFIG_USB_GSPCA_PAC7302=m -CONFIG_USB_GSPCA_PAC7311=m -CONFIG_USB_GSPCA_SE401=m -CONFIG_USB_GSPCA_SN9C2028=m -CONFIG_USB_GSPCA_SN9C20X=m -CONFIG_USB_GSPCA_SONIXB=m -CONFIG_USB_GSPCA_SONIXJ=m -CONFIG_USB_GSPCA_SPCA500=m -CONFIG_USB_GSPCA_SPCA501=m -CONFIG_USB_GSPCA_SPCA505=m -CONFIG_USB_GSPCA_SPCA506=m -CONFIG_USB_GSPCA_SPCA508=m -CONFIG_USB_GSPCA_SPCA561=m -CONFIG_USB_GSPCA_SPCA1528=m -CONFIG_USB_GSPCA_SQ905=m -CONFIG_USB_GSPCA_SQ905C=m -CONFIG_USB_GSPCA_SQ930X=m -CONFIG_USB_GSPCA_STK014=m -CONFIG_USB_GSPCA_STK1135=m -CONFIG_USB_GSPCA_STV0680=m -CONFIG_USB_GSPCA_SUNPLUS=m -CONFIG_USB_GSPCA_T613=m -CONFIG_USB_GSPCA_TOPRO=m -CONFIG_USB_GSPCA_TOUPTEK=m -CONFIG_USB_GSPCA_TV8532=m -CONFIG_USB_GSPCA_VC032X=m -CONFIG_USB_GSPCA_VICAM=m -CONFIG_USB_GSPCA_XIRLINK_CIT=m -CONFIG_USB_GSPCA_ZC3XX=m -CONFIG_USB_PWC=m -# CONFIG_USB_PWC_DEBUG is not set -CONFIG_USB_PWC_INPUT_EVDEV=y -CONFIG_VIDEO_CPIA2=m -CONFIG_USB_ZR364XX=m -CONFIG_USB_STKWEBCAM=m -CONFIG_USB_S2255=m -CONFIG_VIDEO_USBTV=m - -# -# Analog TV USB devices -# -CONFIG_VIDEO_PVRUSB2=m -CONFIG_VIDEO_PVRUSB2_SYSFS=y -CONFIG_VIDEO_PVRUSB2_DVB=y -# CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set -CONFIG_VIDEO_HDPVR=m -CONFIG_VIDEO_USBVISION=m -CONFIG_VIDEO_STK1160_COMMON=m -CONFIG_VIDEO_STK1160_AC97=y -CONFIG_VIDEO_STK1160=m -# CONFIG_VIDEO_GO7007 is not set - -# -# Analog/digital TV USB devices -# -CONFIG_VIDEO_AU0828=m -CONFIG_VIDEO_AU0828_V4L2=y -CONFIG_VIDEO_AU0828_RC=y -CONFIG_VIDEO_CX231XX=m -CONFIG_VIDEO_CX231XX_RC=y -CONFIG_VIDEO_CX231XX_ALSA=m -CONFIG_VIDEO_CX231XX_DVB=m -CONFIG_VIDEO_TM6000=m -CONFIG_VIDEO_TM6000_ALSA=m -CONFIG_VIDEO_TM6000_DVB=m - -# -# Digital TV USB devices -# -CONFIG_DVB_USB=m -# CONFIG_DVB_USB_DEBUG is not set -CONFIG_DVB_USB_A800=m -CONFIG_DVB_USB_DIBUSB_MB=m -# CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set -CONFIG_DVB_USB_DIBUSB_MC=m -CONFIG_DVB_USB_DIB0700=m -CONFIG_DVB_USB_UMT_010=m -CONFIG_DVB_USB_CXUSB=m -CONFIG_DVB_USB_M920X=m -CONFIG_DVB_USB_DIGITV=m -CONFIG_DVB_USB_VP7045=m -CONFIG_DVB_USB_VP702X=m -CONFIG_DVB_USB_GP8PSK=m -CONFIG_DVB_USB_NOVA_T_USB2=m -CONFIG_DVB_USB_TTUSB2=m -CONFIG_DVB_USB_DTT200U=m -CONFIG_DVB_USB_OPERA1=m -CONFIG_DVB_USB_AF9005=m -CONFIG_DVB_USB_AF9005_REMOTE=m -CONFIG_DVB_USB_PCTV452E=m -CONFIG_DVB_USB_DW2102=m -CONFIG_DVB_USB_CINERGY_T2=m -CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_FRIIO=m -CONFIG_DVB_USB_AZ6027=m -CONFIG_DVB_USB_TECHNISAT_USB2=m -CONFIG_DVB_USB_V2=m -CONFIG_DVB_USB_AF9015=m -CONFIG_DVB_USB_AF9035=m -CONFIG_DVB_USB_ANYSEE=m -CONFIG_DVB_USB_AU6610=m -CONFIG_DVB_USB_AZ6007=m -CONFIG_DVB_USB_CE6230=m -CONFIG_DVB_USB_EC168=m -CONFIG_DVB_USB_GL861=m -CONFIG_DVB_USB_LME2510=m -CONFIG_DVB_USB_MXL111SF=m -CONFIG_DVB_USB_RTL28XXU=m -CONFIG_DVB_USB_DVBSKY=m -CONFIG_DVB_TTUSB_BUDGET=m -CONFIG_DVB_TTUSB_DEC=m -CONFIG_SMS_USB_DRV=m -CONFIG_DVB_B2C2_FLEXCOP_USB=m -CONFIG_DVB_B2C2_FLEXCOP_USB_DEBUG=y -CONFIG_DVB_AS102=m - -# -# Webcam, TV (analog/digital) USB devices -# -CONFIG_VIDEO_EM28XX=m -CONFIG_VIDEO_EM28XX_V4L2=m -CONFIG_VIDEO_EM28XX_ALSA=m -CONFIG_VIDEO_EM28XX_DVB=m -CONFIG_VIDEO_EM28XX_RC=m -CONFIG_MEDIA_PCI_SUPPORT=y - -# -# Media capture support -# -CONFIG_VIDEO_MEYE=m -CONFIG_VIDEO_SOLO6X10=m -CONFIG_VIDEO_TW68=m -CONFIG_VIDEO_ZORAN=m -CONFIG_VIDEO_ZORAN_DC30=m -CONFIG_VIDEO_ZORAN_ZR36060=m -CONFIG_VIDEO_ZORAN_BUZ=m -CONFIG_VIDEO_ZORAN_DC10=m -CONFIG_VIDEO_ZORAN_LML33=m -CONFIG_VIDEO_ZORAN_LML33R10=m -CONFIG_VIDEO_ZORAN_AVS6EYES=m - -# -# Media capture/analog TV support -# -CONFIG_VIDEO_IVTV=m -CONFIG_VIDEO_IVTV_ALSA=m -CONFIG_VIDEO_FB_IVTV=m -CONFIG_VIDEO_HEXIUM_GEMINI=m -CONFIG_VIDEO_HEXIUM_ORION=m -CONFIG_VIDEO_MXB=m -CONFIG_VIDEO_DT3155=m - -# -# Media capture/analog/hybrid TV support -# -CONFIG_VIDEO_CX18=m -CONFIG_VIDEO_CX18_ALSA=m -CONFIG_VIDEO_CX23885=m -CONFIG_MEDIA_ALTERA_CI=m -CONFIG_VIDEO_CX25821=m -CONFIG_VIDEO_CX25821_ALSA=m -CONFIG_VIDEO_CX88=m -CONFIG_VIDEO_CX88_ALSA=m -CONFIG_VIDEO_CX88_BLACKBIRD=m -CONFIG_VIDEO_CX88_DVB=m -CONFIG_VIDEO_CX88_ENABLE_VP3054=y -CONFIG_VIDEO_CX88_VP3054=m -CONFIG_VIDEO_CX88_MPEG=m -CONFIG_VIDEO_BT848=m -CONFIG_DVB_BT8XX=m -CONFIG_VIDEO_SAA7134=m -CONFIG_VIDEO_SAA7134_ALSA=m -CONFIG_VIDEO_SAA7134_RC=y -CONFIG_VIDEO_SAA7134_DVB=m -CONFIG_VIDEO_SAA7164=m - -# -# Media digital TV PCI Adapters -# -CONFIG_DVB_AV7110_IR=y -CONFIG_DVB_AV7110=m -CONFIG_DVB_AV7110_OSD=y -CONFIG_DVB_BUDGET_CORE=m -CONFIG_DVB_BUDGET=m -CONFIG_DVB_BUDGET_CI=m -CONFIG_DVB_BUDGET_AV=m -CONFIG_DVB_BUDGET_PATCH=m -CONFIG_DVB_B2C2_FLEXCOP_PCI=m -# CONFIG_DVB_B2C2_FLEXCOP_PCI_DEBUG is not set -CONFIG_DVB_PLUTO2=m -CONFIG_DVB_DM1105=m -CONFIG_DVB_PT1=m -CONFIG_DVB_PT3=m -CONFIG_MANTIS_CORE=m -CONFIG_DVB_MANTIS=m -CONFIG_DVB_HOPPER=m -CONFIG_DVB_NGENE=m -CONFIG_DVB_DDBRIDGE=m -CONFIG_DVB_SMIPCIE=m -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VIDEO_CAFE_CCIC=m -CONFIG_VIDEO_VIA_CAMERA=m -CONFIG_SOC_CAMERA=m -CONFIG_SOC_CAMERA_PLATFORM=m -CONFIG_V4L_MEM2MEM_DRIVERS=y -CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m -CONFIG_VIDEO_SH_VEU=m -CONFIG_V4L_TEST_DRIVERS=y -CONFIG_VIDEO_VIVID=m -CONFIG_VIDEO_VIVID_MAX_DEVS=64 -CONFIG_VIDEO_VIM2M=m -# CONFIG_DVB_PLATFORM_DRIVERS is not set - -# -# Supported MMC/SDIO adapters -# -CONFIG_SMS_SDIO_DRV=m -CONFIG_RADIO_ADAPTERS=y -CONFIG_RADIO_TEA575X=m -# CONFIG_RADIO_SI470X is not set -CONFIG_RADIO_SI4713=m -CONFIG_USB_SI4713=m -CONFIG_PLATFORM_SI4713=m -CONFIG_I2C_SI4713=m -CONFIG_USB_MR800=m -CONFIG_USB_DSBR=m -CONFIG_RADIO_MAXIRADIO=m -CONFIG_RADIO_SHARK=m -CONFIG_RADIO_SHARK2=m -CONFIG_USB_KEENE=m -CONFIG_USB_RAREMONO=m -CONFIG_USB_MA901=m -CONFIG_RADIO_TEA5764=m -CONFIG_RADIO_SAA7706H=m -CONFIG_RADIO_TEF6862=m -CONFIG_RADIO_TIMBERDALE=m -CONFIG_RADIO_WL1273=m - -# -# Texas Instruments WL128x FM driver (ST based) -# -CONFIG_RADIO_WL128X=m -CONFIG_V4L_RADIO_ISA_DRIVERS=y -CONFIG_RADIO_ISA=m -CONFIG_RADIO_CADET=m -CONFIG_RADIO_RTRACK=m -# CONFIG_RADIO_RTRACK2 is not set -CONFIG_RADIO_AZTECH=m -CONFIG_RADIO_GEMTEK=m -CONFIG_RADIO_MIROPCM20=m -CONFIG_RADIO_SF16FMI=m -CONFIG_RADIO_SF16FMR2=m -CONFIG_RADIO_TERRATEC=m -CONFIG_RADIO_TRUST=m -CONFIG_RADIO_TYPHOON=m -CONFIG_RADIO_ZOLTRIX=m - -# -# Supported FireWire (IEEE 1394) Adapters -# -CONFIG_DVB_FIREDTV=m -CONFIG_DVB_FIREDTV_INPUT=y -CONFIG_MEDIA_COMMON_OPTIONS=y - -# -# common driver options -# -CONFIG_VIDEO_CX2341X=m -CONFIG_VIDEO_TVEEPROM=m -CONFIG_CYPRESS_FIRMWARE=m -CONFIG_DVB_B2C2_FLEXCOP=m -CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y -CONFIG_VIDEO_SAA7146=m -CONFIG_VIDEO_SAA7146_VV=m -CONFIG_SMS_SIANO_MDTV=m -CONFIG_SMS_SIANO_RC=y -# CONFIG_SMS_SIANO_DEBUGFS is not set - -# -# Media ancillary drivers (tuners, sensors, i2c, frontends) -# -CONFIG_MEDIA_SUBDRV_AUTOSELECT=y -CONFIG_MEDIA_ATTACH=y -CONFIG_VIDEO_IR_I2C=m - -# -# Audio decoders, processors and mixers -# -CONFIG_VIDEO_TVAUDIO=m -CONFIG_VIDEO_TDA7432=m -CONFIG_VIDEO_TDA9840=m -CONFIG_VIDEO_TEA6415C=m -CONFIG_VIDEO_TEA6420=m -CONFIG_VIDEO_MSP3400=m -CONFIG_VIDEO_CS5345=m -CONFIG_VIDEO_CS53L32A=m -CONFIG_VIDEO_WM8775=m -CONFIG_VIDEO_WM8739=m -CONFIG_VIDEO_VP27SMPX=m - -# -# RDS decoders -# -CONFIG_VIDEO_SAA6588=m - -# -# Video decoders -# -CONFIG_VIDEO_BT819=m -CONFIG_VIDEO_BT856=m -CONFIG_VIDEO_BT866=m -CONFIG_VIDEO_KS0127=m -CONFIG_VIDEO_SAA7110=m -CONFIG_VIDEO_SAA711X=m -CONFIG_VIDEO_TVP5150=m -CONFIG_VIDEO_VPX3220=m - -# -# Video and audio decoders -# -CONFIG_VIDEO_SAA717X=m -CONFIG_VIDEO_CX25840=m - -# -# Video encoders -# -CONFIG_VIDEO_SAA7127=m -CONFIG_VIDEO_SAA7185=m -CONFIG_VIDEO_ADV7170=m -CONFIG_VIDEO_ADV7175=m - -# -# Camera sensor devices -# -CONFIG_VIDEO_OV7670=m -CONFIG_VIDEO_MT9V011=m - -# -# Flash devices -# - -# -# Video improvement chips -# -CONFIG_VIDEO_UPD64031A=m -CONFIG_VIDEO_UPD64083=m - -# -# Audio/Video compression chips -# -CONFIG_VIDEO_SAA6752HS=m - -# -# Miscellaneous helper chips -# -CONFIG_VIDEO_M52790=m - -# -# Sensors used on soc_camera driver -# - -# -# soc_camera sensor drivers -# -CONFIG_SOC_CAMERA_IMX074=m -CONFIG_SOC_CAMERA_MT9M001=m -CONFIG_SOC_CAMERA_MT9M111=m -CONFIG_SOC_CAMERA_MT9T031=m -CONFIG_SOC_CAMERA_MT9T112=m -CONFIG_SOC_CAMERA_MT9V022=m -CONFIG_SOC_CAMERA_OV2640=m -CONFIG_SOC_CAMERA_OV5642=m -CONFIG_SOC_CAMERA_OV6650=m -CONFIG_SOC_CAMERA_OV772X=m -CONFIG_SOC_CAMERA_OV9640=m -CONFIG_SOC_CAMERA_OV9740=m -CONFIG_SOC_CAMERA_RJ54N1=m -CONFIG_SOC_CAMERA_TW9910=m -CONFIG_MEDIA_TUNER=m -CONFIG_MEDIA_TUNER_SIMPLE=m -CONFIG_MEDIA_TUNER_TDA8290=m -CONFIG_MEDIA_TUNER_TDA827X=m -CONFIG_MEDIA_TUNER_TDA18271=m -CONFIG_MEDIA_TUNER_TDA9887=m -CONFIG_MEDIA_TUNER_TEA5761=m -CONFIG_MEDIA_TUNER_TEA5767=m -CONFIG_MEDIA_TUNER_MT20XX=m -CONFIG_MEDIA_TUNER_MT2060=m -CONFIG_MEDIA_TUNER_MT2063=m -CONFIG_MEDIA_TUNER_MT2266=m -CONFIG_MEDIA_TUNER_MT2131=m -CONFIG_MEDIA_TUNER_QT1010=m -CONFIG_MEDIA_TUNER_XC2028=m -CONFIG_MEDIA_TUNER_XC5000=m -CONFIG_MEDIA_TUNER_XC4000=m -CONFIG_MEDIA_TUNER_MXL5005S=m -CONFIG_MEDIA_TUNER_MXL5007T=m -CONFIG_MEDIA_TUNER_MC44S803=m -CONFIG_MEDIA_TUNER_MAX2165=m -CONFIG_MEDIA_TUNER_TDA18218=m -CONFIG_MEDIA_TUNER_FC0011=m -CONFIG_MEDIA_TUNER_FC0012=m -CONFIG_MEDIA_TUNER_FC0013=m -CONFIG_MEDIA_TUNER_TDA18212=m -CONFIG_MEDIA_TUNER_E4000=m -CONFIG_MEDIA_TUNER_FC2580=m -CONFIG_MEDIA_TUNER_M88RS6000T=m -CONFIG_MEDIA_TUNER_TUA9001=m -CONFIG_MEDIA_TUNER_SI2157=m -CONFIG_MEDIA_TUNER_IT913X=m -CONFIG_MEDIA_TUNER_R820T=m -CONFIG_MEDIA_TUNER_MXL301RF=m -CONFIG_MEDIA_TUNER_QM1D1C0042=m - -# -# Multistandard (satellite) frontends -# -CONFIG_DVB_STB0899=m -CONFIG_DVB_STB6100=m -CONFIG_DVB_STV090x=m -CONFIG_DVB_STV6110x=m -CONFIG_DVB_M88DS3103=m - -# -# Multistandard (cable + terrestrial) frontends -# -CONFIG_DVB_DRXK=m -CONFIG_DVB_TDA18271C2DD=m -CONFIG_DVB_SI2165=m - -# -# DVB-S (satellite) frontends -# -CONFIG_DVB_CX24110=m -CONFIG_DVB_CX24123=m -CONFIG_DVB_MT312=m -CONFIG_DVB_ZL10036=m -CONFIG_DVB_ZL10039=m -CONFIG_DVB_S5H1420=m -CONFIG_DVB_STV0288=m -CONFIG_DVB_STB6000=m -CONFIG_DVB_STV0299=m -CONFIG_DVB_STV6110=m -CONFIG_DVB_STV0900=m -CONFIG_DVB_TDA8083=m -CONFIG_DVB_TDA10086=m -CONFIG_DVB_TDA8261=m -CONFIG_DVB_VES1X93=m -CONFIG_DVB_TUNER_ITD1000=m -CONFIG_DVB_TUNER_CX24113=m -CONFIG_DVB_TDA826X=m -CONFIG_DVB_TUA6100=m -CONFIG_DVB_CX24116=m -CONFIG_DVB_CX24117=m -CONFIG_DVB_CX24120=m -CONFIG_DVB_SI21XX=m -CONFIG_DVB_TS2020=m -CONFIG_DVB_DS3000=m -CONFIG_DVB_MB86A16=m -CONFIG_DVB_TDA10071=m - -# -# DVB-T (terrestrial) frontends -# -CONFIG_DVB_SP8870=m -CONFIG_DVB_SP887X=m -CONFIG_DVB_CX22700=m -CONFIG_DVB_CX22702=m -CONFIG_DVB_DRXD=m -CONFIG_DVB_L64781=m -CONFIG_DVB_TDA1004X=m -CONFIG_DVB_NXT6000=m -CONFIG_DVB_MT352=m -CONFIG_DVB_ZL10353=m -CONFIG_DVB_DIB3000MB=m -CONFIG_DVB_DIB3000MC=m -CONFIG_DVB_DIB7000M=m -CONFIG_DVB_DIB7000P=m -CONFIG_DVB_TDA10048=m -CONFIG_DVB_AF9013=m -CONFIG_DVB_EC100=m -CONFIG_DVB_STV0367=m -CONFIG_DVB_CXD2820R=m -CONFIG_DVB_RTL2830=m -CONFIG_DVB_RTL2832=m -CONFIG_DVB_SI2168=m -CONFIG_DVB_AS102_FE=m - -# -# DVB-C (cable) frontends -# -CONFIG_DVB_VES1820=m -CONFIG_DVB_TDA10021=m -CONFIG_DVB_TDA10023=m -CONFIG_DVB_STV0297=m - -# -# ATSC (North American/Korean Terrestrial/Cable DTV) frontends -# -CONFIG_DVB_NXT200X=m -CONFIG_DVB_OR51211=m -CONFIG_DVB_OR51132=m -CONFIG_DVB_BCM3510=m -CONFIG_DVB_LGDT330X=m -CONFIG_DVB_LGDT3305=m -CONFIG_DVB_LGDT3306A=m -CONFIG_DVB_LG2160=m -CONFIG_DVB_S5H1409=m -CONFIG_DVB_AU8522=m -CONFIG_DVB_AU8522_DTV=m -CONFIG_DVB_AU8522_V4L=m -CONFIG_DVB_S5H1411=m - -# -# ISDB-T (terrestrial) frontends -# -CONFIG_DVB_S921=m -CONFIG_DVB_DIB8000=m -CONFIG_DVB_MB86A20S=m - -# -# ISDB-S (satellite) & ISDB-T (terrestrial) frontends -# -CONFIG_DVB_TC90522=m - -# -# Digital terrestrial only tuners/PLL -# -CONFIG_DVB_PLL=m -CONFIG_DVB_TUNER_DIB0070=m -CONFIG_DVB_TUNER_DIB0090=m - -# -# SEC control devices for DVB-S -# -CONFIG_DVB_DRX39XYJ=m -CONFIG_DVB_LNBP21=m -CONFIG_DVB_LNBP22=m -CONFIG_DVB_ISL6405=m -CONFIG_DVB_ISL6421=m -CONFIG_DVB_ISL6423=m -CONFIG_DVB_A8293=m -CONFIG_DVB_SP2=m -CONFIG_DVB_LGS8GXX=m -CONFIG_DVB_ATBM8830=m -CONFIG_DVB_TDA665x=m -CONFIG_DVB_IX2505V=m -CONFIG_DVB_M88RS2000=m -CONFIG_DVB_AF9033=m - -# -# Tools to develop new frontends -# -# CONFIG_DVB_DUMMY_FE is not set - -# -# Graphics support -# -CONFIG_AGP=m -CONFIG_AGP_ALI=m -CONFIG_AGP_ATI=m -CONFIG_AGP_AMD=m -CONFIG_AGP_AMD64=m -CONFIG_AGP_INTEL=m -CONFIG_AGP_NVIDIA=m -CONFIG_AGP_SIS=m -CONFIG_AGP_SWORKS=m -CONFIG_AGP_VIA=m -CONFIG_AGP_EFFICEON=m -CONFIG_INTEL_GTT=m -CONFIG_VGA_ARB=y -CONFIG_VGA_ARB_MAX_GPUS=16 -CONFIG_VGA_SWITCHEROO=y -CONFIG_DRM=m -CONFIG_DRM_MIPI_DSI=y -CONFIG_DRM_KMS_HELPER=m -CONFIG_DRM_KMS_FB_HELPER=y -CONFIG_DRM_FBDEV_EMULATION=y -CONFIG_DRM_LOAD_EDID_FIRMWARE=y -CONFIG_DRM_TTM=m - -# -# I2C encoder or helper chips -# -CONFIG_DRM_I2C_ADV7511=m -CONFIG_DRM_I2C_CH7006=m -CONFIG_DRM_I2C_SIL164=m -CONFIG_DRM_I2C_NXP_TDA998X=m -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m -CONFIG_DRM_RADEON=m -CONFIG_DRM_RADEON_USERPTR=y -# CONFIG_DRM_RADEON_UMS is not set -CONFIG_DRM_AMDGPU=m -# CONFIG_DRM_AMDGPU_CIK is not set -CONFIG_DRM_AMDGPU_USERPTR=y -CONFIG_DRM_NOUVEAU=m -CONFIG_NOUVEAU_DEBUG=5 -CONFIG_NOUVEAU_DEBUG_DEFAULT=3 -CONFIG_DRM_NOUVEAU_BACKLIGHT=y -CONFIG_DRM_I810=m -CONFIG_DRM_I915=m -# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set -CONFIG_DRM_MGA=m -CONFIG_DRM_SIS=m -CONFIG_DRM_VIA=m -CONFIG_DRM_SAVAGE=m -CONFIG_DRM_VGEM=m -CONFIG_DRM_VMWGFX=m -CONFIG_DRM_VMWGFX_FBCON=y -CONFIG_DRM_GMA500=m -CONFIG_DRM_GMA600=y -CONFIG_DRM_GMA3600=y -CONFIG_DRM_UDL=m -CONFIG_DRM_AST=m -CONFIG_DRM_MGAG200=m -CONFIG_DRM_CIRRUS_QEMU=m -CONFIG_DRM_QXL=m -CONFIG_DRM_BOCHS=m -CONFIG_DRM_VIRTIO_GPU=m -CONFIG_DRM_PANEL=y - -# -# Display Panels -# -CONFIG_DRM_BRIDGE=y - -# -# Display Interface Bridges -# - -# -# Frame buffer Devices -# -CONFIG_FB=y -CONFIG_FIRMWARE_EDID=y -CONFIG_FB_CMDLINE=y -CONFIG_FB_DDC=m -CONFIG_FB_BOOT_VESA_SUPPORT=y -CONFIG_FB_CFB_FILLRECT=y -CONFIG_FB_CFB_COPYAREA=y -CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set -CONFIG_FB_SYS_FILLRECT=y -CONFIG_FB_SYS_COPYAREA=y -CONFIG_FB_SYS_IMAGEBLIT=y -# CONFIG_FB_FOREIGN_ENDIAN is not set -CONFIG_FB_SYS_FOPS=y -CONFIG_FB_DEFERRED_IO=y -CONFIG_FB_HECUBA=m -CONFIG_FB_SVGALIB=m -# CONFIG_FB_MACMODES is not set -CONFIG_FB_BACKLIGHT=y -CONFIG_FB_MODE_HELPERS=y -CONFIG_FB_TILEBLITTING=y - -# -# Frame buffer hardware drivers -# -CONFIG_FB_CIRRUS=m -CONFIG_FB_PM2=m -# CONFIG_FB_PM2_FIFO_DISCONNECT is not set -CONFIG_FB_CYBER2000=m -CONFIG_FB_CYBER2000_DDC=y -CONFIG_FB_ARC=m -# CONFIG_FB_ASILIANT is not set -# CONFIG_FB_IMSTT is not set -CONFIG_FB_VGA16=m -# CONFIG_FB_UVESA is not set -CONFIG_FB_VESA=y -CONFIG_FB_EFI=y -CONFIG_FB_N411=m -CONFIG_FB_HGA=m -CONFIG_FB_OPENCORES=m -CONFIG_FB_S1D13XXX=m -CONFIG_FB_NVIDIA=m -CONFIG_FB_NVIDIA_I2C=y -# CONFIG_FB_NVIDIA_DEBUG is not set -CONFIG_FB_NVIDIA_BACKLIGHT=y -CONFIG_FB_RIVA=m -CONFIG_FB_RIVA_I2C=y -# CONFIG_FB_RIVA_DEBUG is not set -CONFIG_FB_RIVA_BACKLIGHT=y -CONFIG_FB_I740=m -CONFIG_FB_I810=m -CONFIG_FB_I810_GTF=y -CONFIG_FB_I810_I2C=y -CONFIG_FB_LE80578=m -CONFIG_FB_CARILLO_RANCH=m -# CONFIG_FB_INTEL is not set -CONFIG_FB_MATROX=m -CONFIG_FB_MATROX_MILLENIUM=y -CONFIG_FB_MATROX_MYSTIQUE=y -CONFIG_FB_MATROX_G=y -CONFIG_FB_MATROX_I2C=m -CONFIG_FB_MATROX_MAVEN=m -CONFIG_FB_RADEON=m -CONFIG_FB_RADEON_I2C=y -CONFIG_FB_RADEON_BACKLIGHT=y -# CONFIG_FB_RADEON_DEBUG is not set -CONFIG_FB_ATY128=m -CONFIG_FB_ATY128_BACKLIGHT=y -CONFIG_FB_ATY=m -CONFIG_FB_ATY_CT=y -CONFIG_FB_ATY_GENERIC_LCD=y -CONFIG_FB_ATY_GX=y -CONFIG_FB_ATY_BACKLIGHT=y -# CONFIG_FB_S3 is not set -# CONFIG_FB_SAVAGE is not set -CONFIG_FB_SIS=m -CONFIG_FB_SIS_300=y -CONFIG_FB_SIS_315=y -CONFIG_FB_VIA=m -# CONFIG_FB_VIA_DIRECT_PROCFS is not set -CONFIG_FB_VIA_X_COMPATIBILITY=y -CONFIG_FB_NEOMAGIC=m -CONFIG_FB_KYRO=m -CONFIG_FB_3DFX=m -# CONFIG_FB_3DFX_ACCEL is not set -CONFIG_FB_3DFX_I2C=y -CONFIG_FB_VOODOO1=m -CONFIG_FB_VT8623=m -CONFIG_FB_TRIDENT=m -CONFIG_FB_ARK=m -CONFIG_FB_PM3=m -CONFIG_FB_CARMINE=m -CONFIG_FB_CARMINE_DRAM_EVAL=y -# CONFIG_CARMINE_DRAM_CUSTOM is not set -CONFIG_FB_GEODE=y -CONFIG_FB_GEODE_LX=m -CONFIG_FB_GEODE_GX=m -CONFIG_FB_GEODE_GX1=m -# CONFIG_FB_SM501 is not set -CONFIG_FB_SMSCUFX=m -CONFIG_FB_UDL=m -CONFIG_FB_IBM_GXT4500=m -# CONFIG_FB_VIRTUAL is not set -CONFIG_XEN_FBDEV_FRONTEND=y -CONFIG_FB_METRONOME=m -CONFIG_FB_MB862XX=m -CONFIG_FB_MB862XX_PCI_GDC=y -CONFIG_FB_MB862XX_I2C=y -CONFIG_FB_BROADSHEET=m -CONFIG_FB_AUO_K190X=m -CONFIG_FB_AUO_K1900=m -CONFIG_FB_AUO_K1901=m -# CONFIG_FB_HYPERV is not set -# CONFIG_FB_SIMPLE is not set -CONFIG_FB_SM712=m -CONFIG_BACKLIGHT_LCD_SUPPORT=y -CONFIG_LCD_CLASS_DEVICE=m -CONFIG_LCD_PLATFORM=m -CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=m -CONFIG_BACKLIGHT_LM3533=m -CONFIG_BACKLIGHT_CARILLO_RANCH=m -CONFIG_BACKLIGHT_APPLE=m -CONFIG_BACKLIGHT_PM8941_WLED=m -CONFIG_BACKLIGHT_SAHARA=m -CONFIG_BACKLIGHT_ADP8860=m -CONFIG_BACKLIGHT_ADP8870=m -CONFIG_BACKLIGHT_PCF50633=m -CONFIG_BACKLIGHT_LM3639=m -CONFIG_BACKLIGHT_OT200=m -CONFIG_BACKLIGHT_SKY81452=m -CONFIG_BACKLIGHT_TPS65217=m -CONFIG_BACKLIGHT_GPIO=m -CONFIG_BACKLIGHT_LV5207LP=m -CONFIG_BACKLIGHT_BD6107=m -CONFIG_VGASTATE=m -CONFIG_HDMI=y - -# -# Console display driver support -# -CONFIG_VGA_CONSOLE=y -CONFIG_MDA_CONSOLE=m -CONFIG_DUMMY_CONSOLE=y -CONFIG_DUMMY_CONSOLE_COLUMNS=80 -CONFIG_DUMMY_CONSOLE_ROWS=25 -CONFIG_FRAMEBUFFER_CONSOLE=y -CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y -CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y -CONFIG_LOGO=y -# CONFIG_LOGO_LINUX_MONO is not set -# CONFIG_LOGO_LINUX_VGA16 is not set -CONFIG_LOGO_LINUX_CLUT224=y -CONFIG_SOUND=m -CONFIG_SOUND_OSS_CORE=y -CONFIG_SOUND_OSS_CORE_PRECLAIM=y -CONFIG_SND=m -CONFIG_SND_TIMER=m -CONFIG_SND_PCM=m -CONFIG_SND_HWDEP=m -CONFIG_SND_RAWMIDI=m -CONFIG_SND_JACK=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m -CONFIG_SND_OSSEMUL=y -CONFIG_SND_MIXER_OSS=m -CONFIG_SND_PCM_OSS=m -CONFIG_SND_PCM_OSS_PLUGINS=y -CONFIG_SND_PCM_TIMER=y -CONFIG_SND_SEQUENCER_OSS=y -CONFIG_SND_HRTIMER=m -CONFIG_SND_SEQ_HRTIMER_DEFAULT=y -CONFIG_SND_DYNAMIC_MINORS=y -CONFIG_SND_MAX_CARDS=32 -# CONFIG_SND_SUPPORT_OLD_API is not set -CONFIG_SND_PROC_FS=y -CONFIG_SND_VERBOSE_PROCFS=y -# CONFIG_SND_VERBOSE_PRINTK is not set -# CONFIG_SND_DEBUG is not set -CONFIG_SND_VMASTER=y -CONFIG_SND_DMA_SGBUF=y -CONFIG_SND_RAWMIDI_SEQ=m -CONFIG_SND_OPL3_LIB_SEQ=m -CONFIG_SND_OPL4_LIB_SEQ=m -CONFIG_SND_SBAWE_SEQ=m -CONFIG_SND_EMU10K1_SEQ=m -CONFIG_SND_MPU401_UART=m -CONFIG_SND_OPL3_LIB=m -CONFIG_SND_OPL4_LIB=m -CONFIG_SND_VX_LIB=m -CONFIG_SND_AC97_CODEC=m -CONFIG_SND_DRIVERS=y -# CONFIG_SND_PCSP is not set -CONFIG_SND_DUMMY=m -CONFIG_SND_ALOOP=m -CONFIG_SND_VIRMIDI=m -CONFIG_SND_MTPAV=m -CONFIG_SND_MTS64=m -CONFIG_SND_SERIAL_U16550=m -CONFIG_SND_MPU401=m -CONFIG_SND_PORTMAN2X4=m -CONFIG_SND_AC97_POWER_SAVE=y -CONFIG_SND_AC97_POWER_SAVE_DEFAULT=0 -CONFIG_SND_WSS_LIB=m -CONFIG_SND_SB_COMMON=m -CONFIG_SND_SB8_DSP=m -CONFIG_SND_SB16_DSP=m -CONFIG_SND_ISA=y -CONFIG_SND_ADLIB=m -CONFIG_SND_AD1816A=m -CONFIG_SND_AD1848=m -CONFIG_SND_ALS100=m -CONFIG_SND_AZT1605=m -CONFIG_SND_AZT2316=m -CONFIG_SND_AZT2320=m -CONFIG_SND_CMI8328=m -CONFIG_SND_CMI8330=m -CONFIG_SND_CS4231=m -CONFIG_SND_CS4236=m -CONFIG_SND_ES1688=m -CONFIG_SND_ES18XX=m -CONFIG_SND_SC6000=m -CONFIG_SND_GUSCLASSIC=m -CONFIG_SND_GUSEXTREME=m -CONFIG_SND_GUSMAX=m -CONFIG_SND_INTERWAVE=m -CONFIG_SND_INTERWAVE_STB=m -CONFIG_SND_JAZZ16=m -CONFIG_SND_OPL3SA2=m -CONFIG_SND_OPTI92X_AD1848=m -CONFIG_SND_OPTI92X_CS4231=m -CONFIG_SND_OPTI93X=m -CONFIG_SND_MIRO=m -CONFIG_SND_SB8=m -CONFIG_SND_SB16=m -CONFIG_SND_SBAWE=m -CONFIG_SND_SB16_CSP=y -CONFIG_SND_SSCAPE=m -CONFIG_SND_WAVEFRONT=m -CONFIG_SND_MSND_PINNACLE=m -CONFIG_SND_MSND_CLASSIC=m -CONFIG_SND_PCI=y -CONFIG_SND_AD1889=m -CONFIG_SND_ALS300=m -CONFIG_SND_ALS4000=m -CONFIG_SND_ALI5451=m -CONFIG_SND_ASIHPI=m -CONFIG_SND_ATIIXP=m -CONFIG_SND_ATIIXP_MODEM=m -CONFIG_SND_AU8810=m -CONFIG_SND_AU8820=m -CONFIG_SND_AU8830=m -CONFIG_SND_AW2=m -CONFIG_SND_AZT3328=m -CONFIG_SND_BT87X=m -# CONFIG_SND_BT87X_OVERCLOCK is not set -CONFIG_SND_CA0106=m -CONFIG_SND_CMIPCI=m -CONFIG_SND_OXYGEN_LIB=m -CONFIG_SND_OXYGEN=m -CONFIG_SND_CS4281=m -CONFIG_SND_CS46XX=m -CONFIG_SND_CS46XX_NEW_DSP=y -CONFIG_SND_CS5530=m -CONFIG_SND_CS5535AUDIO=m -CONFIG_SND_CTXFI=m -CONFIG_SND_DARLA20=m -CONFIG_SND_GINA20=m -CONFIG_SND_LAYLA20=m -CONFIG_SND_DARLA24=m -CONFIG_SND_GINA24=m -CONFIG_SND_LAYLA24=m -CONFIG_SND_MONA=m -CONFIG_SND_MIA=m -CONFIG_SND_ECHO3G=m -CONFIG_SND_INDIGO=m -CONFIG_SND_INDIGOIO=m -CONFIG_SND_INDIGODJ=m -CONFIG_SND_INDIGOIOX=m -CONFIG_SND_INDIGODJX=m -CONFIG_SND_EMU10K1=m -CONFIG_SND_EMU10K1X=m -CONFIG_SND_ENS1370=m -CONFIG_SND_ENS1371=m -CONFIG_SND_ES1938=m -CONFIG_SND_ES1968=m -CONFIG_SND_ES1968_INPUT=y -CONFIG_SND_ES1968_RADIO=y -CONFIG_SND_FM801=m -CONFIG_SND_FM801_TEA575X_BOOL=y -CONFIG_SND_HDSP=m -CONFIG_SND_HDSPM=m -CONFIG_SND_ICE1712=m -CONFIG_SND_ICE1724=m -CONFIG_SND_INTEL8X0=m -CONFIG_SND_INTEL8X0M=m -CONFIG_SND_KORG1212=m -CONFIG_SND_LOLA=m -CONFIG_SND_LX6464ES=m -CONFIG_SND_MAESTRO3=m -CONFIG_SND_MAESTRO3_INPUT=y -CONFIG_SND_MIXART=m -CONFIG_SND_NM256=m -CONFIG_SND_PCXHR=m -CONFIG_SND_RIPTIDE=m -CONFIG_SND_RME32=m -CONFIG_SND_RME96=m -CONFIG_SND_RME9652=m -CONFIG_SND_SIS7019=m -CONFIG_SND_SONICVIBES=m -CONFIG_SND_TRIDENT=m -CONFIG_SND_VIA82XX=m -CONFIG_SND_VIA82XX_MODEM=m -CONFIG_SND_VIRTUOSO=m -CONFIG_SND_VX222=m -CONFIG_SND_YMFPCI=m - -# -# HD-Audio -# -CONFIG_SND_HDA=m -CONFIG_SND_HDA_INTEL=m -CONFIG_SND_HDA_HWDEP=y -CONFIG_SND_HDA_RECONFIG=y -# CONFIG_SND_HDA_INPUT_BEEP is not set -CONFIG_SND_HDA_PATCH_LOADER=y -CONFIG_SND_HDA_CODEC_REALTEK=m -CONFIG_SND_HDA_CODEC_ANALOG=m -CONFIG_SND_HDA_CODEC_SIGMATEL=m -CONFIG_SND_HDA_CODEC_VIA=m -CONFIG_SND_HDA_CODEC_HDMI=m -CONFIG_SND_HDA_CODEC_CIRRUS=m -CONFIG_SND_HDA_CODEC_CONEXANT=m -CONFIG_SND_HDA_CODEC_CA0110=m -CONFIG_SND_HDA_CODEC_CA0132=m -CONFIG_SND_HDA_CODEC_CA0132_DSP=y -CONFIG_SND_HDA_CODEC_CMEDIA=m -CONFIG_SND_HDA_CODEC_SI3054=m -CONFIG_SND_HDA_GENERIC=m -CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 -CONFIG_SND_HDA_CORE=m -CONFIG_SND_HDA_DSP_LOADER=y -CONFIG_SND_HDA_I915=y -CONFIG_SND_HDA_PREALLOC_SIZE=2048 -CONFIG_SND_USB=y -CONFIG_SND_USB_AUDIO=m -CONFIG_SND_USB_UA101=m -CONFIG_SND_USB_USX2Y=m -CONFIG_SND_USB_CAIAQ=m -CONFIG_SND_USB_CAIAQ_INPUT=y -CONFIG_SND_USB_US122L=m -CONFIG_SND_USB_6FIRE=m -CONFIG_SND_USB_HIFACE=m -CONFIG_SND_BCD2000=m -CONFIG_SND_USB_LINE6=m -CONFIG_SND_USB_POD=m -CONFIG_SND_USB_PODHD=m -CONFIG_SND_USB_TONEPORT=m -CONFIG_SND_USB_VARIAX=m -CONFIG_SND_FIREWIRE=y -CONFIG_SND_FIREWIRE_LIB=m -CONFIG_SND_DICE=m -CONFIG_SND_OXFW=m -CONFIG_SND_ISIGHT=m -CONFIG_SND_SCS1X=m -CONFIG_SND_FIREWORKS=m -CONFIG_SND_BEBOB=m -CONFIG_SND_FIREWIRE_DIGI00X=m -CONFIG_SND_FIREWIRE_TASCAM=m -CONFIG_SND_PCMCIA=y -CONFIG_SND_VXPOCKET=m -CONFIG_SND_PDAUDIOCF=m -# CONFIG_SND_SOC is not set -# CONFIG_SOUND_PRIME is not set -CONFIG_AC97_BUS=m - -# -# HID support -# -CONFIG_HID=m -CONFIG_HID_BATTERY_STRENGTH=y -CONFIG_HIDRAW=y -CONFIG_UHID=m -CONFIG_HID_GENERIC=m - -# -# Special HID drivers -# -CONFIG_HID_A4TECH=m -CONFIG_HID_ACRUX=m -CONFIG_HID_ACRUX_FF=y -CONFIG_HID_APPLE=m -CONFIG_HID_APPLEIR=m -CONFIG_HID_AUREAL=m -CONFIG_HID_BELKIN=m -CONFIG_HID_BETOP_FF=m -CONFIG_HID_CHERRY=m -CONFIG_HID_CHICONY=m -CONFIG_HID_CORSAIR=m -CONFIG_HID_PRODIKEYS=m -CONFIG_HID_CP2112=m -CONFIG_HID_CYPRESS=m -CONFIG_HID_DRAGONRISE=m -CONFIG_DRAGONRISE_FF=y -CONFIG_HID_EMS_FF=m -CONFIG_HID_ELECOM=m -CONFIG_HID_ELO=m -CONFIG_HID_EZKEY=m -CONFIG_HID_GEMBIRD=m -CONFIG_HID_GFRM=m -CONFIG_HID_HOLTEK=m -CONFIG_HOLTEK_FF=y -CONFIG_HID_GT683R=m -CONFIG_HID_KEYTOUCH=m -CONFIG_HID_KYE=m -CONFIG_HID_UCLOGIC=m -CONFIG_HID_WALTOP=m -CONFIG_HID_GYRATION=m -CONFIG_HID_ICADE=m -CONFIG_HID_TWINHAN=m -CONFIG_HID_KENSINGTON=m -CONFIG_HID_LCPOWER=m -CONFIG_HID_LENOVO=m -CONFIG_HID_LOGITECH=m -CONFIG_HID_LOGITECH_DJ=m -CONFIG_HID_LOGITECH_HIDPP=m -CONFIG_LOGITECH_FF=y -CONFIG_LOGIRUMBLEPAD2_FF=y -CONFIG_LOGIG940_FF=y -CONFIG_LOGIWHEELS_FF=y -CONFIG_HID_MAGICMOUSE=m -CONFIG_HID_MICROSOFT=m -CONFIG_HID_MONTEREY=m -CONFIG_HID_MULTITOUCH=m -CONFIG_HID_NTRIG=m -CONFIG_HID_ORTEK=m -CONFIG_HID_PANTHERLORD=m -CONFIG_PANTHERLORD_FF=y -CONFIG_HID_PENMOUNT=m -CONFIG_HID_PETALYNX=m -CONFIG_HID_PICOLCD=m -CONFIG_HID_PICOLCD_FB=y -CONFIG_HID_PICOLCD_BACKLIGHT=y -CONFIG_HID_PICOLCD_LCD=y -CONFIG_HID_PICOLCD_LEDS=y -CONFIG_HID_PICOLCD_CIR=y -CONFIG_HID_PLANTRONICS=m -CONFIG_HID_PRIMAX=m -CONFIG_HID_ROCCAT=m -CONFIG_HID_SAITEK=m -CONFIG_HID_SAMSUNG=m -CONFIG_HID_SONY=m -CONFIG_SONY_FF=y -CONFIG_HID_SPEEDLINK=m -CONFIG_HID_STEELSERIES=m -CONFIG_HID_SUNPLUS=m -CONFIG_HID_RMI=m -CONFIG_HID_GREENASIA=m -CONFIG_GREENASIA_FF=y -CONFIG_HID_HYPERV_MOUSE=m -CONFIG_HID_SMARTJOYPLUS=m -CONFIG_SMARTJOYPLUS_FF=y -CONFIG_HID_TIVO=m -CONFIG_HID_TOPSEED=m -CONFIG_HID_THINGM=m -CONFIG_HID_THRUSTMASTER=m -CONFIG_THRUSTMASTER_FF=y -CONFIG_HID_WACOM=m -CONFIG_HID_WIIMOTE=m -CONFIG_HID_XINMO=m -CONFIG_HID_ZEROPLUS=m -CONFIG_ZEROPLUS_FF=y -CONFIG_HID_ZYDACRON=m -CONFIG_HID_SENSOR_HUB=m -CONFIG_HID_SENSOR_CUSTOM_SENSOR=m - -# -# USB HID support -# -CONFIG_USB_HID=m -CONFIG_HID_PID=y -CONFIG_USB_HIDDEV=y - -# -# USB HID Boot Protocol drivers -# -# CONFIG_USB_KBD is not set -# CONFIG_USB_MOUSE is not set - -# -# I2C HID support -# -CONFIG_I2C_HID=m -CONFIG_USB_OHCI_LITTLE_ENDIAN=y -CONFIG_USB_SUPPORT=y -CONFIG_USB_COMMON=y -CONFIG_USB_ARCH_HAS_HCD=y -CONFIG_USB=y -CONFIG_USB_ANNOUNCE_NEW_DEVICES=y - -# -# Miscellaneous USB options -# -CONFIG_USB_DEFAULT_PERSIST=y -# CONFIG_USB_DYNAMIC_MINORS is not set -CONFIG_USB_OTG=y -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set -# CONFIG_USB_OTG_FSM is not set -CONFIG_USB_ULPI_BUS=m -CONFIG_USB_MON=y -CONFIG_USB_WUSB=m -CONFIG_USB_WUSB_CBAF=m -# CONFIG_USB_WUSB_CBAF_DEBUG is not set - -# -# USB Host Controller Drivers -# -CONFIG_USB_C67X00_HCD=m -CONFIG_USB_XHCI_HCD=m -CONFIG_USB_XHCI_PCI=m -CONFIG_USB_XHCI_PLATFORM=m -CONFIG_USB_EHCI_HCD=m -CONFIG_USB_EHCI_ROOT_HUB_TT=y -CONFIG_USB_EHCI_TT_NEWSCHED=y -CONFIG_USB_EHCI_PCI=m -CONFIG_USB_EHCI_HCD_PLATFORM=m -CONFIG_USB_OXU210HP_HCD=m -CONFIG_USB_ISP116X_HCD=m -CONFIG_USB_ISP1362_HCD=m -CONFIG_USB_FOTG210_HCD=m -CONFIG_USB_OHCI_HCD=m -CONFIG_USB_OHCI_HCD_PCI=m -CONFIG_USB_OHCI_HCD_SSB=y -CONFIG_USB_OHCI_HCD_PLATFORM=m -CONFIG_USB_UHCI_HCD=m -CONFIG_USB_U132_HCD=m -CONFIG_USB_SL811_HCD=m -# CONFIG_USB_SL811_HCD_ISO is not set -CONFIG_USB_SL811_CS=m -CONFIG_USB_R8A66597_HCD=m -CONFIG_USB_WHCI_HCD=m -CONFIG_USB_HWA_HCD=m -# CONFIG_USB_HCD_BCMA is not set -CONFIG_USB_HCD_SSB=m -# CONFIG_USB_HCD_TEST_MODE is not set - -# -# USB Device Class drivers -# -CONFIG_USB_ACM=m -CONFIG_USB_PRINTER=m -CONFIG_USB_WDM=m -CONFIG_USB_TMC=m - -# -# NOTE: USB_STORAGE depends on SCSI but BLK_DEV_SD may -# - -# -# also be needed; see USB_STORAGE Help for more info -# -CONFIG_USB_STORAGE=m -# CONFIG_USB_STORAGE_DEBUG is not set -CONFIG_USB_STORAGE_REALTEK=m -CONFIG_REALTEK_AUTOPM=y -CONFIG_USB_STORAGE_DATAFAB=m -CONFIG_USB_STORAGE_FREECOM=m -CONFIG_USB_STORAGE_ISD200=m -CONFIG_USB_STORAGE_USBAT=m -CONFIG_USB_STORAGE_SDDR09=m -CONFIG_USB_STORAGE_SDDR55=m -CONFIG_USB_STORAGE_JUMPSHOT=m -CONFIG_USB_STORAGE_ALAUDA=m -CONFIG_USB_STORAGE_ONETOUCH=m -CONFIG_USB_STORAGE_KARMA=m -CONFIG_USB_STORAGE_CYPRESS_ATACB=m -CONFIG_USB_STORAGE_ENE_UB6250=m -CONFIG_USB_UAS=m - -# -# USB Imaging devices -# -CONFIG_USB_MDC800=m -CONFIG_USB_MICROTEK=m -CONFIG_USBIP_CORE=m -CONFIG_USBIP_VHCI_HCD=m -CONFIG_USBIP_HOST=m -# CONFIG_USBIP_DEBUG is not set -CONFIG_USB_MUSB_HDRC=m -CONFIG_USB_MUSB_HOST=y - -# -# Platform Glue Layer -# - -# -# MUSB DMA mode -# -CONFIG_MUSB_PIO_ONLY=y -CONFIG_USB_DWC3=m -# CONFIG_USB_DWC3_ULPI is not set -CONFIG_USB_DWC3_HOST=y - -# -# Platform Glue Driver Support -# -CONFIG_USB_DWC3_PCI=m -# CONFIG_USB_DWC2 is not set -CONFIG_USB_CHIPIDEA=m -# CONFIG_USB_CHIPIDEA_HOST is not set -# CONFIG_USB_CHIPIDEA_DEBUG is not set -CONFIG_USB_ISP1760=m -CONFIG_USB_ISP1760_HCD=y -CONFIG_USB_ISP1760_HOST_ROLE=y - -# -# USB port drivers -# -CONFIG_USB_USS720=m -CONFIG_USB_SERIAL=m -CONFIG_USB_SERIAL_GENERIC=y -CONFIG_USB_SERIAL_SIMPLE=m -CONFIG_USB_SERIAL_AIRCABLE=m -CONFIG_USB_SERIAL_ARK3116=m -CONFIG_USB_SERIAL_BELKIN=m -CONFIG_USB_SERIAL_CH341=m -CONFIG_USB_SERIAL_WHITEHEAT=m -CONFIG_USB_SERIAL_DIGI_ACCELEPORT=m -CONFIG_USB_SERIAL_CP210X=m -CONFIG_USB_SERIAL_CYPRESS_M8=m -CONFIG_USB_SERIAL_EMPEG=m -CONFIG_USB_SERIAL_FTDI_SIO=m -CONFIG_USB_SERIAL_VISOR=m -CONFIG_USB_SERIAL_IPAQ=m -CONFIG_USB_SERIAL_IR=m -CONFIG_USB_SERIAL_EDGEPORT=m -CONFIG_USB_SERIAL_EDGEPORT_TI=m -CONFIG_USB_SERIAL_F81232=m -CONFIG_USB_SERIAL_GARMIN=m -CONFIG_USB_SERIAL_IPW=m -CONFIG_USB_SERIAL_IUU=m -CONFIG_USB_SERIAL_KEYSPAN_PDA=m -CONFIG_USB_SERIAL_KEYSPAN=m -CONFIG_USB_SERIAL_KLSI=m -CONFIG_USB_SERIAL_KOBIL_SCT=m -CONFIG_USB_SERIAL_MCT_U232=m -CONFIG_USB_SERIAL_METRO=m -CONFIG_USB_SERIAL_MOS7720=m -CONFIG_USB_SERIAL_MOS7715_PARPORT=y -CONFIG_USB_SERIAL_MOS7840=m -CONFIG_USB_SERIAL_MXUPORT=m -CONFIG_USB_SERIAL_NAVMAN=m -CONFIG_USB_SERIAL_PL2303=m -CONFIG_USB_SERIAL_OTI6858=m -CONFIG_USB_SERIAL_QCAUX=m -CONFIG_USB_SERIAL_QUALCOMM=m -CONFIG_USB_SERIAL_SPCP8X5=m -CONFIG_USB_SERIAL_SAFE=m -CONFIG_USB_SERIAL_SAFE_PADDED=y -CONFIG_USB_SERIAL_SIERRAWIRELESS=m -CONFIG_USB_SERIAL_SYMBOL=m -CONFIG_USB_SERIAL_TI=m -CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m -CONFIG_USB_SERIAL_WWAN=m -CONFIG_USB_SERIAL_OPTION=m -CONFIG_USB_SERIAL_OMNINET=m -CONFIG_USB_SERIAL_OPTICON=m -CONFIG_USB_SERIAL_XSENS_MT=m -CONFIG_USB_SERIAL_WISHBONE=m -CONFIG_USB_SERIAL_SSU100=m -CONFIG_USB_SERIAL_QT2=m -CONFIG_USB_SERIAL_DEBUG=m - -# -# USB Miscellaneous drivers -# -CONFIG_USB_EMI62=m -CONFIG_USB_EMI26=m -CONFIG_USB_ADUTUX=m -CONFIG_USB_SEVSEG=m -CONFIG_USB_LEGOTOWER=m -CONFIG_USB_LCD=m -CONFIG_USB_LED=m -CONFIG_USB_CYPRESS_CY7C63=m -CONFIG_USB_CYTHERM=m -CONFIG_USB_IDMOUSE=m -CONFIG_USB_FTDI_ELAN=m -CONFIG_USB_APPLEDISPLAY=m -CONFIG_USB_SISUSBVGA=m -CONFIG_USB_SISUSBVGA_CON=y -CONFIG_USB_LD=m -CONFIG_USB_TRANCEVIBRATOR=m -CONFIG_USB_IOWARRIOR=m -CONFIG_USB_TEST=m -# CONFIG_USB_EHSET_TEST_FIXTURE is not set -CONFIG_USB_ISIGHTFW=m -CONFIG_USB_YUREX=m -CONFIG_USB_EZUSB_FX2=m -CONFIG_USB_HSIC_USB3503=m -CONFIG_USB_LINK_LAYER_TEST=m -CONFIG_USB_CHAOSKEY=m -CONFIG_USB_ATM=m -CONFIG_USB_SPEEDTOUCH=m -CONFIG_USB_CXACRU=m -CONFIG_USB_UEAGLEATM=m -CONFIG_USB_XUSBATM=m - -# -# USB Physical Layer drivers -# -# CONFIG_USB_PHY is not set -# CONFIG_NOP_USB_XCEIV is not set -# CONFIG_USB_GPIO_VBUS is not set -# CONFIG_TAHVO_USB is not set -# CONFIG_USB_ISP1301 is not set -# CONFIG_USB_GADGET is not set -CONFIG_USB_LED_TRIG=y -CONFIG_UWB=m -CONFIG_UWB_HWA=m -CONFIG_UWB_WHCI=m -CONFIG_UWB_I1480U=m -CONFIG_MMC=m -# CONFIG_MMC_DEBUG is not set - -# -# MMC/SD/SDIO Card Drivers -# -CONFIG_MMC_BLOCK=m -CONFIG_MMC_BLOCK_MINORS=8 -CONFIG_MMC_BLOCK_BOUNCE=y -CONFIG_SDIO_UART=m -# CONFIG_MMC_TEST is not set - -# -# MMC/SD/SDIO Host Controller Drivers -# -CONFIG_MMC_SDHCI=m -CONFIG_MMC_SDHCI_PCI=m -CONFIG_MMC_RICOH_MMC=y -CONFIG_MMC_SDHCI_ACPI=m -CONFIG_MMC_SDHCI_PLTFM=m -CONFIG_MMC_WBSD=m -CONFIG_MMC_TIFM_SD=m -CONFIG_MMC_SDRICOH_CS=m -CONFIG_MMC_CB710=m -CONFIG_MMC_VIA_SDMMC=m -CONFIG_MMC_VUB300=m -CONFIG_MMC_USHC=m -CONFIG_MMC_USDHI6ROL0=m -CONFIG_MMC_REALTEK_PCI=m -CONFIG_MMC_REALTEK_USB=m -CONFIG_MMC_TOSHIBA_PCI=m -CONFIG_MMC_MTK=m -CONFIG_MEMSTICK=m -# CONFIG_MEMSTICK_DEBUG is not set - -# -# MemoryStick drivers -# -# CONFIG_MEMSTICK_UNSAFE_RESUME is not set -CONFIG_MSPRO_BLOCK=m -# CONFIG_MS_BLOCK is not set - -# -# MemoryStick Host Controller Drivers -# -CONFIG_MEMSTICK_TIFM_MS=m -CONFIG_MEMSTICK_JMICRON_38X=m -CONFIG_MEMSTICK_R592=m -CONFIG_MEMSTICK_REALTEK_PCI=m -CONFIG_MEMSTICK_REALTEK_USB=m -CONFIG_NEW_LEDS=y -CONFIG_LEDS_CLASS=y -CONFIG_LEDS_CLASS_FLASH=m - -# -# LED drivers -# -CONFIG_LEDS_LM3530=m -CONFIG_LEDS_LM3533=m -CONFIG_LEDS_LM3642=m -CONFIG_LEDS_NET48XX=m -CONFIG_LEDS_WRAP=m -CONFIG_LEDS_PCA9532=m -# CONFIG_LEDS_PCA9532_GPIO is not set -CONFIG_LEDS_GPIO=m -CONFIG_LEDS_LP3944=m -CONFIG_LEDS_LP55XX_COMMON=m -CONFIG_LEDS_LP5521=m -CONFIG_LEDS_LP5523=m -CONFIG_LEDS_LP5562=m -CONFIG_LEDS_LP8501=m -CONFIG_LEDS_LP8860=m -CONFIG_LEDS_CLEVO_MAIL=m -CONFIG_LEDS_PCA955X=m -CONFIG_LEDS_PCA963X=m -CONFIG_LEDS_REGULATOR=m -CONFIG_LEDS_BD2802=m -CONFIG_LEDS_INTEL_SS4200=m -CONFIG_LEDS_LT3593=m -CONFIG_LEDS_DELL_NETBOOKS=m -CONFIG_LEDS_MC13783=m -CONFIG_LEDS_TCA6507=m -CONFIG_LEDS_TLC591XX=m -CONFIG_LEDS_LM355x=m -CONFIG_LEDS_OT200=m -CONFIG_LEDS_MENF21BMC=m - -# -# LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) -# -CONFIG_LEDS_BLINKM=m - -# -# LED Triggers -# -CONFIG_LEDS_TRIGGERS=y -CONFIG_LEDS_TRIGGER_TIMER=m -CONFIG_LEDS_TRIGGER_ONESHOT=m -CONFIG_LEDS_TRIGGER_HEARTBEAT=m -CONFIG_LEDS_TRIGGER_BACKLIGHT=m -# CONFIG_LEDS_TRIGGER_CPU is not set -CONFIG_LEDS_TRIGGER_GPIO=m -CONFIG_LEDS_TRIGGER_DEFAULT_ON=m - -# -# iptables trigger is under Netfilter config (LED target) -# -CONFIG_LEDS_TRIGGER_TRANSIENT=m -CONFIG_LEDS_TRIGGER_CAMERA=m -CONFIG_ACCESSIBILITY=y -CONFIG_A11Y_BRAILLE_CONSOLE=y -CONFIG_INFINIBAND=m -CONFIG_INFINIBAND_USER_MAD=m -CONFIG_INFINIBAND_USER_ACCESS=m -CONFIG_INFINIBAND_USER_MEM=y -CONFIG_INFINIBAND_ON_DEMAND_PAGING=y -CONFIG_INFINIBAND_ADDR_TRANS=y -CONFIG_INFINIBAND_MTHCA=m -CONFIG_INFINIBAND_MTHCA_DEBUG=y -# CONFIG_INFINIBAND_CXGB3 is not set -CONFIG_INFINIBAND_CXGB4=m -CONFIG_MLX4_INFINIBAND=m -CONFIG_MLX5_INFINIBAND=m -CONFIG_INFINIBAND_NES=m -# CONFIG_INFINIBAND_NES_DEBUG is not set -CONFIG_INFINIBAND_OCRDMA=m -CONFIG_INFINIBAND_USNIC=m -CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_CM is not set -CONFIG_INFINIBAND_IPOIB_DEBUG=y -# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set -CONFIG_INFINIBAND_SRP=m -CONFIG_INFINIBAND_SRPT=m -CONFIG_INFINIBAND_ISER=m -CONFIG_INFINIBAND_ISERT=m -CONFIG_EDAC_ATOMIC_SCRUB=y -CONFIG_EDAC_SUPPORT=y -CONFIG_EDAC=y -CONFIG_EDAC_LEGACY_SYSFS=y -# CONFIG_EDAC_DEBUG is not set -CONFIG_EDAC_DECODE_MCE=y -# CONFIG_EDAC_MM_EDAC is not set -CONFIG_RTC_LIB=y -CONFIG_RTC_CLASS=y -# CONFIG_RTC_HCTOSYS is not set -# CONFIG_RTC_SYSTOHC is not set -# CONFIG_RTC_DEBUG is not set - -# -# RTC interfaces -# -CONFIG_RTC_INTF_SYSFS=y -CONFIG_RTC_INTF_PROC=y -CONFIG_RTC_INTF_DEV=y -CONFIG_RTC_INTF_DEV_UIE_EMUL=y -CONFIG_RTC_DRV_TEST=m - -# -# I2C RTC drivers -# -CONFIG_RTC_DRV_ABB5ZES3=m -CONFIG_RTC_DRV_ABX80X=m -CONFIG_RTC_DRV_DS1307=m -CONFIG_RTC_DRV_DS1374=m -CONFIG_RTC_DRV_DS1374_WDT=y -CONFIG_RTC_DRV_DS1672=m -CONFIG_RTC_DRV_DS3232=m -CONFIG_RTC_DRV_MAX6900=m -CONFIG_RTC_DRV_RS5C372=m -CONFIG_RTC_DRV_ISL1208=m -CONFIG_RTC_DRV_ISL12022=m -CONFIG_RTC_DRV_ISL12057=m -CONFIG_RTC_DRV_X1205=m -CONFIG_RTC_DRV_PCF2127=m -CONFIG_RTC_DRV_PCF8523=m -CONFIG_RTC_DRV_PCF8563=m -CONFIG_RTC_DRV_PCF85063=m -CONFIG_RTC_DRV_PCF8583=m -CONFIG_RTC_DRV_M41T80=m -CONFIG_RTC_DRV_M41T80_WDT=y -CONFIG_RTC_DRV_BQ32K=m -CONFIG_RTC_DRV_S35390A=m -CONFIG_RTC_DRV_FM3130=m -CONFIG_RTC_DRV_RX8581=m -CONFIG_RTC_DRV_RX8025=m -CONFIG_RTC_DRV_EM3027=m -CONFIG_RTC_DRV_RV3029C2=m -CONFIG_RTC_DRV_RV8803=m - -# -# SPI RTC drivers -# - -# -# Platform RTC drivers -# -CONFIG_RTC_DRV_CMOS=y -CONFIG_RTC_DRV_DS1286=m -CONFIG_RTC_DRV_DS1511=m -CONFIG_RTC_DRV_DS1553=m -CONFIG_RTC_DRV_DS1685_FAMILY=m -CONFIG_RTC_DRV_DS1685=y -# CONFIG_RTC_DRV_DS1689 is not set -# CONFIG_RTC_DRV_DS17285 is not set -# CONFIG_RTC_DRV_DS17485 is not set -# CONFIG_RTC_DRV_DS17885 is not set -# CONFIG_RTC_DS1685_PROC_REGS is not set -# CONFIG_RTC_DS1685_SYSFS_REGS is not set -CONFIG_RTC_DRV_DS1742=m -CONFIG_RTC_DRV_DS2404=m -CONFIG_RTC_DRV_STK17TA8=m -CONFIG_RTC_DRV_M48T86=m -CONFIG_RTC_DRV_M48T35=m -CONFIG_RTC_DRV_M48T59=m -CONFIG_RTC_DRV_MSM6242=m -CONFIG_RTC_DRV_BQ4802=m -CONFIG_RTC_DRV_RP5C01=m -CONFIG_RTC_DRV_V3020=m -CONFIG_RTC_DRV_PCF50633=m - -# -# on-CPU RTC drivers -# -CONFIG_RTC_DRV_MC13XXX=m -CONFIG_RTC_DRV_MT6397=m - -# -# HID Sensor RTC drivers -# -CONFIG_RTC_DRV_HID_SENSOR_TIME=m -CONFIG_DMADEVICES=y -# CONFIG_DMADEVICES_DEBUG is not set - -# -# DMA Devices -# -CONFIG_DMA_ENGINE=y -CONFIG_DMA_VIRTUAL_CHANNELS=m -CONFIG_DMA_ACPI=y -CONFIG_INTEL_IDMA64=m -CONFIG_PCH_DMA=m -CONFIG_TIMB_DMA=m -CONFIG_DW_DMAC_CORE=m -CONFIG_DW_DMAC=m -CONFIG_DW_DMAC_PCI=m -CONFIG_HSU_DMA=m - -# -# DMA Clients -# -# CONFIG_ASYNC_TX_DMA is not set -CONFIG_DMATEST=m -CONFIG_AUXDISPLAY=y -# CONFIG_KS0108 is not set -CONFIG_UIO=m -CONFIG_UIO_CIF=m -CONFIG_UIO_PDRV_GENIRQ=m -CONFIG_UIO_DMEM_GENIRQ=m -CONFIG_UIO_AEC=m -CONFIG_UIO_SERCOS3=m -CONFIG_UIO_PCI_GENERIC=m -CONFIG_UIO_NETX=m -CONFIG_UIO_PRUSS=m -CONFIG_UIO_MF624=m -CONFIG_VFIO_IOMMU_TYPE1=m -CONFIG_VFIO_VIRQFD=m -CONFIG_VFIO=m -CONFIG_VFIO_PCI=m -# CONFIG_VFIO_PCI_VGA is not set -CONFIG_VFIO_PCI_MMAP=y -CONFIG_VFIO_PCI_INTX=y -CONFIG_IRQ_BYPASS_MANAGER=m -CONFIG_VIRT_DRIVERS=y -CONFIG_VIRTIO=m - -# -# Virtio drivers -# -CONFIG_VIRTIO_PCI=m -CONFIG_VIRTIO_PCI_LEGACY=y -CONFIG_VIRTIO_BALLOON=m -CONFIG_VIRTIO_INPUT=m -CONFIG_VIRTIO_MMIO=m -# CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set - -# -# Microsoft Hyper-V guest support -# -CONFIG_HYPERV=m -CONFIG_HYPERV_UTILS=m -CONFIG_HYPERV_BALLOON=m - -# -# Xen driver support -# -CONFIG_XEN_BALLOON=y -CONFIG_XEN_SCRUB_PAGES=y -CONFIG_XEN_DEV_EVTCHN=y -CONFIG_XEN_BACKEND=y -CONFIG_XENFS=y -CONFIG_XEN_COMPAT_XENFS=y -CONFIG_XEN_SYS_HYPERVISOR=y -CONFIG_XEN_XENBUS_FRONTEND=y -CONFIG_XEN_GNTDEV=m -CONFIG_XEN_GRANT_DEV_ALLOC=m -CONFIG_SWIOTLB_XEN=y -CONFIG_XEN_PCIDEV_BACKEND=m -# CONFIG_XEN_SCSI_BACKEND is not set -CONFIG_XEN_PRIVCMD=y -CONFIG_XEN_ACPI_PROCESSOR=m -CONFIG_XEN_HAVE_PVMMU=y -CONFIG_XEN_AUTO_XLATE=y -CONFIG_XEN_ACPI=y -CONFIG_XEN_SYMS=y -CONFIG_XEN_HAVE_VPMU=y -CONFIG_STAGING=y -# CONFIG_SLICOSS is not set -# CONFIG_PRISM2_USB is not set -# CONFIG_COMEDI is not set -# CONFIG_PANEL is not set -CONFIG_RTL8192U=m -CONFIG_RTLLIB=m -CONFIG_RTLLIB_CRYPTO_CCMP=m -CONFIG_RTLLIB_CRYPTO_TKIP=m -CONFIG_RTLLIB_CRYPTO_WEP=m -CONFIG_RTL8192E=m -CONFIG_R8712U=m -CONFIG_R8188EU=m -CONFIG_88EU_AP_MODE=y -CONFIG_R8723AU=m -CONFIG_8723AU_AP_MODE=y -CONFIG_8723AU_BT_COEXIST=y -CONFIG_RTS5208=m -CONFIG_VT6655=m -CONFIG_VT6656=m - -# -# IIO staging drivers -# - -# -# Accelerometers -# - -# -# Analog to digital converters -# -CONFIG_AD7606=m -CONFIG_AD7606_IFACE_PARALLEL=m - -# -# Analog digital bi-direction converters -# -CONFIG_ADT7316=m -CONFIG_ADT7316_I2C=m - -# -# Capacitance to digital converters -# -CONFIG_AD7150=m -CONFIG_AD7152=m -CONFIG_AD7746=m - -# -# Direct Digital Synthesis -# - -# -# Digital gyroscope sensors -# - -# -# Network Analyzer, Impedance Converters -# -CONFIG_AD5933=m - -# -# Light sensors -# -CONFIG_SENSORS_ISL29018=m -CONFIG_SENSORS_ISL29028=m -CONFIG_TSL2583=m -CONFIG_TSL2x7x=m - -# -# Magnetometer sensors -# -CONFIG_SENSORS_HMC5843=m -CONFIG_SENSORS_HMC5843_I2C=m - -# -# Active energy metering IC -# -CONFIG_ADE7854=m -CONFIG_ADE7854_I2C=m - -# -# Resolver to digital converters -# - -# -# Triggers - standalone -# -CONFIG_IIO_PERIODIC_RTC_TRIGGER=m -# CONFIG_IIO_SIMPLE_DUMMY is not set -CONFIG_FB_SM750=m -CONFIG_FB_XGI=m - -# -# Speakup console speech -# -CONFIG_SPEAKUP=m -CONFIG_SPEAKUP_SYNTH_ACNTSA=m -CONFIG_SPEAKUP_SYNTH_ACNTPC=m -CONFIG_SPEAKUP_SYNTH_APOLLO=m -CONFIG_SPEAKUP_SYNTH_AUDPTR=m -CONFIG_SPEAKUP_SYNTH_BNS=m -CONFIG_SPEAKUP_SYNTH_DECTLK=m -CONFIG_SPEAKUP_SYNTH_DECEXT=m -CONFIG_SPEAKUP_SYNTH_DECPC=m -CONFIG_SPEAKUP_SYNTH_DTLK=m -CONFIG_SPEAKUP_SYNTH_KEYPC=m -CONFIG_SPEAKUP_SYNTH_LTLK=m -CONFIG_SPEAKUP_SYNTH_SOFT=m -CONFIG_SPEAKUP_SYNTH_SPKOUT=m -CONFIG_SPEAKUP_SYNTH_TXPRT=m -CONFIG_SPEAKUP_SYNTH_DUMMY=m -CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m -CONFIG_STAGING_MEDIA=y -CONFIG_I2C_BCM2048=m -CONFIG_DVB_CXD2099=m -CONFIG_DVB_MN88472=m -CONFIG_DVB_MN88473=m -CONFIG_LIRC_STAGING=y -CONFIG_LIRC_BT829=m -CONFIG_LIRC_IMON=m -CONFIG_LIRC_PARALLEL=m -CONFIG_LIRC_SASEM=m -CONFIG_LIRC_SERIAL=m -CONFIG_LIRC_SERIAL_TRANSMITTER=y -CONFIG_LIRC_SIR=m -CONFIG_LIRC_ZILOG=m -# CONFIG_STAGING_RDMA is not set - -# -# Android -# -CONFIG_WIMAX_GDM72XX=m -# CONFIG_WIMAX_GDM72XX_QOS is not set -# CONFIG_WIMAX_GDM72XX_K_MODE is not set -CONFIG_WIMAX_GDM72XX_WIMAX2=y -CONFIG_WIMAX_GDM72XX_USB=y -# CONFIG_WIMAX_GDM72XX_SDIO is not set -# CONFIG_WIMAX_GDM72XX_USB_PM is not set -CONFIG_LTE_GDM724X=m -CONFIG_FIREWIRE_SERIAL=m -CONFIG_FWTTY_MAX_TOTAL_PORTS=64 -CONFIG_FWTTY_MAX_CARD_PORTS=32 -# CONFIG_LUSTRE_FS is not set -# CONFIG_DGNC is not set -# CONFIG_DGAP is not set -# CONFIG_GS_FPGABOOT is not set -# CONFIG_WILC1000_DRIVER is not set -# CONFIG_MOST is not set -CONFIG_X86_PLATFORM_DEVICES=y -CONFIG_ACER_WMI=m -CONFIG_ACERHDF=m -CONFIG_ALIENWARE_WMI=m -CONFIG_ASUS_LAPTOP=m -CONFIG_DELL_LAPTOP=m -CONFIG_DELL_WMI=m -CONFIG_DELL_WMI_AIO=m -CONFIG_DELL_SMO8800=m -CONFIG_DELL_RBTN=m -CONFIG_FUJITSU_LAPTOP=m -# CONFIG_FUJITSU_LAPTOP_DEBUG is not set -CONFIG_FUJITSU_TABLET=m -CONFIG_AMILO_RFKILL=m -CONFIG_TC1100_WMI=m -CONFIG_HP_ACCEL=m -CONFIG_HP_WIRELESS=m -CONFIG_HP_WMI=m -CONFIG_MSI_LAPTOP=m -CONFIG_PANASONIC_LAPTOP=m -CONFIG_COMPAL_LAPTOP=m -CONFIG_SONY_LAPTOP=m -CONFIG_SONYPI_COMPAT=y -CONFIG_IDEAPAD_LAPTOP=m -CONFIG_THINKPAD_ACPI=m -CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y -# CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set -# CONFIG_THINKPAD_ACPI_DEBUG is not set -# CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set -CONFIG_THINKPAD_ACPI_VIDEO=y -CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y -CONFIG_SENSORS_HDAPS=m -CONFIG_INTEL_MENLOW=m -CONFIG_EEEPC_LAPTOP=m -CONFIG_ASUS_WMI=m -CONFIG_ASUS_NB_WMI=m -CONFIG_EEEPC_WMI=m -CONFIG_ACPI_WMI=m -CONFIG_MSI_WMI=m -CONFIG_TOPSTAR_LAPTOP=m -CONFIG_ACPI_TOSHIBA=m -CONFIG_TOSHIBA_BT_RFKILL=m -CONFIG_TOSHIBA_HAPS=m -CONFIG_TOSHIBA_WMI=m -CONFIG_ACPI_CMPC=m -CONFIG_INTEL_IPS=m -CONFIG_IBM_RTL=m -CONFIG_SAMSUNG_LAPTOP=m -CONFIG_MXM_WMI=m -CONFIG_INTEL_OAKTRAIL=m -CONFIG_SAMSUNG_Q10=m -CONFIG_APPLE_GMUX=m -CONFIG_INTEL_RST=m -CONFIG_INTEL_SMARTCONNECT=m -CONFIG_PVPANIC=m -CONFIG_INTEL_PMC_IPC=m -CONFIG_SURFACE_PRO3_BUTTON=m -CONFIG_CHROME_PLATFORMS=y -CONFIG_CHROMEOS_LAPTOP=m -CONFIG_CHROMEOS_PSTORE=m -CONFIG_CROS_EC_CHARDEV=m -CONFIG_CROS_EC_LPC=m -CONFIG_CROS_EC_PROTO=y -CONFIG_CLKDEV_LOOKUP=y -CONFIG_HAVE_CLK_PREPARE=y -CONFIG_COMMON_CLK=y - -# -# Common Clock Framework -# -CONFIG_COMMON_CLK_SI5351=m -# CONFIG_COMMON_CLK_PXA is not set -CONFIG_COMMON_CLK_CDCE706=m - -# -# Hardware Spinlock drivers -# - -# -# Clock Source drivers -# -CONFIG_CLKSRC_I8253=y -CONFIG_CLKEVT_I8253=y -CONFIG_I8253_LOCK=y -CONFIG_CLKBLD_I8253=y -# CONFIG_ATMEL_PIT is not set -# CONFIG_SH_TIMER_CMT is not set -# CONFIG_SH_TIMER_MTU2 is not set -# CONFIG_SH_TIMER_TMU is not set -# CONFIG_EM_TIMER_STI is not set -# CONFIG_MAILBOX is not set -CONFIG_IOMMU_API=y -CONFIG_IOMMU_SUPPORT=y - -# -# Generic IOMMU Pagetable Support -# -CONFIG_IOMMU_IOVA=y -CONFIG_DMAR_TABLE=y -CONFIG_INTEL_IOMMU=y -CONFIG_INTEL_IOMMU_SVM=y -# CONFIG_INTEL_IOMMU_DEFAULT_ON is not set -CONFIG_INTEL_IOMMU_FLOPPY_WA=y - -# -# Remoteproc drivers -# -CONFIG_REMOTEPROC=m -CONFIG_STE_MODEM_RPROC=m - -# -# Rpmsg drivers -# - -# -# SOC (System On Chip) specific Drivers -# -# CONFIG_SUNXI_SRAM is not set -# CONFIG_SOC_TI is not set -CONFIG_PM_DEVFREQ=y - -# -# DEVFREQ Governors -# -CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y -CONFIG_DEVFREQ_GOV_PERFORMANCE=y -CONFIG_DEVFREQ_GOV_POWERSAVE=y -CONFIG_DEVFREQ_GOV_USERSPACE=y - -# -# DEVFREQ Drivers -# -CONFIG_PM_DEVFREQ_EVENT=y -CONFIG_EXTCON=m - -# -# Extcon Device Drivers -# -CONFIG_EXTCON_ADC_JACK=m -CONFIG_EXTCON_GPIO=m -CONFIG_EXTCON_RT8973A=m -CONFIG_EXTCON_SM5502=m -CONFIG_EXTCON_USB_GPIO=m -CONFIG_MEMORY=y -CONFIG_IIO=m -CONFIG_IIO_BUFFER=y -# CONFIG_IIO_BUFFER_CB is not set -CONFIG_IIO_KFIFO_BUF=m -CONFIG_IIO_TRIGGERED_BUFFER=m -CONFIG_IIO_TRIGGER=y -CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 - -# -# Accelerometers -# -CONFIG_BMA180=m -CONFIG_BMC150_ACCEL=m -CONFIG_BMC150_ACCEL_I2C=m -CONFIG_HID_SENSOR_ACCEL_3D=m -CONFIG_IIO_ST_ACCEL_3AXIS=m -CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m -CONFIG_KXCJK1013=m -CONFIG_MMA8452=m -CONFIG_MMA9551_CORE=m -CONFIG_MMA9551=m -CONFIG_MMA9553=m -CONFIG_MXC4005=m -CONFIG_STK8312=m -CONFIG_STK8BA50=m - -# -# Analog to digital converters -# -CONFIG_AD7291=m -CONFIG_AD799X=m -CONFIG_CC10001_ADC=m -CONFIG_MAX1363=m -CONFIG_MCP3422=m -CONFIG_NAU7802=m -CONFIG_TI_ADC081C=m -CONFIG_TI_AM335X_ADC=m -CONFIG_VIPERBOARD_ADC=m - -# -# Amplifiers -# - -# -# Chemical Sensors -# -# CONFIG_VZ89X is not set - -# -# Hid Sensor IIO Common -# -CONFIG_HID_SENSOR_IIO_COMMON=m -CONFIG_HID_SENSOR_IIO_TRIGGER=m -CONFIG_IIO_MS_SENSORS_I2C=m - -# -# SSP Sensor Common -# -CONFIG_IIO_ST_SENSORS_I2C=m -CONFIG_IIO_ST_SENSORS_CORE=m - -# -# Digital to analog converters -# -CONFIG_AD5064=m -CONFIG_AD5380=m -CONFIG_AD5446=m -CONFIG_M62332=m -CONFIG_MAX517=m -CONFIG_MCP4725=m - -# -# Frequency Synthesizers DDS/PLL -# - -# -# Clock Generator/Distribution -# - -# -# Phase-Locked Loop (PLL) frequency synthesizers -# - -# -# Digital gyroscope sensors -# -CONFIG_BMG160=m -CONFIG_BMG160_I2C=m -CONFIG_HID_SENSOR_GYRO_3D=m -CONFIG_IIO_ST_GYRO_3AXIS=m -CONFIG_IIO_ST_GYRO_I2C_3AXIS=m -CONFIG_ITG3200=m - -# -# Humidity sensors -# -CONFIG_DHT11=m -CONFIG_HDC100X=m -CONFIG_HTU21=m -CONFIG_SI7005=m -CONFIG_SI7020=m - -# -# Inertial measurement units -# -CONFIG_KMX61=m -CONFIG_INV_MPU6050_IIO=m - -# -# Light sensors -# -CONFIG_ACPI_ALS=m -CONFIG_ADJD_S311=m -CONFIG_AL3320A=m -CONFIG_APDS9300=m -CONFIG_APDS9960=m -CONFIG_BH1750=m -CONFIG_CM32181=m -CONFIG_CM3232=m -CONFIG_CM3323=m -CONFIG_CM36651=m -CONFIG_GP2AP020A00F=m -CONFIG_ISL29125=m -CONFIG_HID_SENSOR_ALS=m -CONFIG_HID_SENSOR_PROX=m -CONFIG_JSA1212=m -CONFIG_RPR0521=m -CONFIG_SENSORS_LM3533=m -CONFIG_LTR501=m -CONFIG_OPT3001=m -CONFIG_PA12203001=m -CONFIG_STK3310=m -CONFIG_TCS3414=m -CONFIG_TCS3472=m -CONFIG_SENSORS_TSL2563=m -CONFIG_TSL4531=m -CONFIG_US5182D=m -CONFIG_VCNL4000=m - -# -# Magnetometer sensors -# -CONFIG_AK8975=m -CONFIG_AK09911=m -CONFIG_BMC150_MAGN=m -CONFIG_MAG3110=m -CONFIG_HID_SENSOR_MAGNETOMETER_3D=m -CONFIG_MMC35240=m -CONFIG_IIO_ST_MAGN_3AXIS=m -CONFIG_IIO_ST_MAGN_I2C_3AXIS=m - -# -# Inclinometer sensors -# -CONFIG_HID_SENSOR_INCLINOMETER_3D=m -CONFIG_HID_SENSOR_DEVICE_ROTATION=m - -# -# Triggers - standalone -# -CONFIG_IIO_INTERRUPT_TRIGGER=m -CONFIG_IIO_SYSFS_TRIGGER=m - -# -# Digital potentiometers -# -CONFIG_MCP4531=m - -# -# Pressure sensors -# -CONFIG_BMP280=m -CONFIG_HID_SENSOR_PRESS=m -CONFIG_MPL115=m -CONFIG_MPL3115=m -CONFIG_MS5611=m -CONFIG_MS5611_I2C=m -CONFIG_MS5637=m -CONFIG_IIO_ST_PRESS=m -CONFIG_IIO_ST_PRESS_I2C=m -CONFIG_T5403=m - -# -# Lightning sensors -# - -# -# Proximity sensors -# -# CONFIG_LIDAR_LITE_V2 is not set -CONFIG_SX9500=m - -# -# Temperature sensors -# -CONFIG_MLX90614=m -CONFIG_TMP006=m -CONFIG_TSYS01=m -CONFIG_TSYS02D=m -CONFIG_NTB=m -CONFIG_NTB_PINGPONG=m -CONFIG_NTB_TOOL=m -CONFIG_NTB_TRANSPORT=m -# CONFIG_VME_BUS is not set -# CONFIG_PWM is not set -# CONFIG_IPACK_BUS is not set -CONFIG_RESET_CONTROLLER=y -CONFIG_FMC=m -CONFIG_FMC_FAKEDEV=m -CONFIG_FMC_TRIVIAL=m -CONFIG_FMC_WRITE_EEPROM=m -CONFIG_FMC_CHARDEV=m - -# -# PHY Subsystem -# -CONFIG_GENERIC_PHY=y -# CONFIG_PHY_PXA_28NM_HSIC is not set -# CONFIG_PHY_PXA_28NM_USB2 is not set -# CONFIG_BCM_KONA_USB2_PHY is not set -# CONFIG_PHY_TUSB1210 is not set -CONFIG_POWERCAP=y -CONFIG_INTEL_RAPL=m -# CONFIG_MCB is not set - -# -# Performance monitor support -# -CONFIG_RAS=y -# CONFIG_AMD_MCE_INJ is not set -CONFIG_THUNDERBOLT=m - -# -# Android -# -# CONFIG_ANDROID is not set -CONFIG_LIBNVDIMM=y -CONFIG_BLK_DEV_PMEM=m -CONFIG_ND_BLK=m -CONFIG_ND_CLAIM=y -CONFIG_ND_BTT=m -CONFIG_BTT=y -CONFIG_NVMEM=m -CONFIG_STM=m -CONFIG_STM_DUMMY=m -CONFIG_STM_SOURCE_CONSOLE=m -CONFIG_INTEL_TH=m -CONFIG_INTEL_TH_PCI=m -CONFIG_INTEL_TH_GTH=m -CONFIG_INTEL_TH_STH=m -CONFIG_INTEL_TH_MSU=m -CONFIG_INTEL_TH_PTI=m -# CONFIG_INTEL_TH_DEBUG is not set - -# -# FPGA Configuration Support -# -# CONFIG_FPGA is not set - -# -# Firmware Drivers -# -CONFIG_EDD=m -CONFIG_EDD_OFF=y -CONFIG_FIRMWARE_MEMMAP=y -CONFIG_DELL_RBU=m -CONFIG_DCDBAS=m -CONFIG_DMIID=y -CONFIG_DMI_SYSFS=m -CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y -CONFIG_ISCSI_IBFT_FIND=y -CONFIG_ISCSI_IBFT=m -# CONFIG_GOOGLE_FIRMWARE is not set - -# -# EFI (Extensible Firmware Interface) Support -# -CONFIG_EFI_VARS=m -CONFIG_EFI_ESRT=y -CONFIG_EFI_VARS_PSTORE=m -CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y -# CONFIG_EFI_FAKE_MEMMAP is not set -CONFIG_EFI_RUNTIME_WRAPPERS=y -CONFIG_UEFI_CPER=y - -# -# File systems -# -CONFIG_DCACHE_WORD_ACCESS=y -CONFIG_EXT2_FS=m -CONFIG_EXT2_FS_XATTR=y -CONFIG_EXT2_FS_POSIX_ACL=y -CONFIG_EXT2_FS_SECURITY=y -CONFIG_EXT3_FS=m -CONFIG_EXT3_FS_POSIX_ACL=y -CONFIG_EXT3_FS_SECURITY=y -CONFIG_EXT4_FS=m -CONFIG_EXT4_FS_POSIX_ACL=y -CONFIG_EXT4_FS_SECURITY=y -CONFIG_EXT4_ENCRYPTION=m -CONFIG_EXT4_FS_ENCRYPTION=y -# CONFIG_EXT4_DEBUG is not set -CONFIG_JBD2=m -# CONFIG_JBD2_DEBUG is not set -CONFIG_FS_MBCACHE=m -CONFIG_REISERFS_FS=m -# CONFIG_REISERFS_CHECK is not set -# CONFIG_REISERFS_PROC_INFO is not set -CONFIG_REISERFS_FS_XATTR=y -CONFIG_REISERFS_FS_POSIX_ACL=y -CONFIG_REISERFS_FS_SECURITY=y -CONFIG_JFS_FS=m -CONFIG_JFS_POSIX_ACL=y -CONFIG_JFS_SECURITY=y -# CONFIG_JFS_DEBUG is not set -# CONFIG_JFS_STATISTICS is not set -CONFIG_XFS_FS=m -CONFIG_XFS_QUOTA=y -CONFIG_XFS_POSIX_ACL=y -# CONFIG_XFS_RT is not set -# CONFIG_XFS_WARN is not set -# CONFIG_XFS_DEBUG is not set -CONFIG_GFS2_FS=m -CONFIG_GFS2_FS_LOCKING_DLM=y -CONFIG_OCFS2_FS=m -CONFIG_OCFS2_FS_O2CB=m -CONFIG_OCFS2_FS_USERSPACE_CLUSTER=m -# CONFIG_OCFS2_FS_STATS is not set -CONFIG_OCFS2_DEBUG_MASKLOG=y -# CONFIG_OCFS2_DEBUG_FS is not set -CONFIG_BTRFS_FS=m -CONFIG_BTRFS_FS_POSIX_ACL=y -# CONFIG_BTRFS_FS_CHECK_INTEGRITY is not set -# CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set -# CONFIG_BTRFS_DEBUG is not set -# CONFIG_BTRFS_ASSERT is not set -CONFIG_NILFS2_FS=m -CONFIG_F2FS_FS=m -CONFIG_F2FS_STAT_FS=y -CONFIG_F2FS_FS_XATTR=y -CONFIG_F2FS_FS_POSIX_ACL=y -# CONFIG_F2FS_FS_SECURITY is not set -# CONFIG_F2FS_CHECK_FS is not set -CONFIG_F2FS_FS_ENCRYPTION=y -# CONFIG_F2FS_IO_TRACE is not set -CONFIG_FS_DAX=y -CONFIG_FS_POSIX_ACL=y -CONFIG_EXPORTFS=y -CONFIG_FILE_LOCKING=y -CONFIG_FSNOTIFY=y -CONFIG_DNOTIFY=y -CONFIG_INOTIFY_USER=y -CONFIG_FANOTIFY=y -CONFIG_FANOTIFY_ACCESS_PERMISSIONS=y -CONFIG_QUOTA=y -CONFIG_QUOTA_NETLINK_INTERFACE=y -# CONFIG_PRINT_QUOTA_WARNING is not set -# CONFIG_QUOTA_DEBUG is not set -CONFIG_QUOTA_TREE=m -CONFIG_QFMT_V1=m -CONFIG_QFMT_V2=m -CONFIG_QUOTACTL=y -CONFIG_AUTOFS4_FS=m -CONFIG_FUSE_FS=m -CONFIG_CUSE=m -CONFIG_OVERLAY_FS=m - -# -# Caches -# -CONFIG_FSCACHE=m -# CONFIG_FSCACHE_STATS is not set -# CONFIG_FSCACHE_HISTOGRAM is not set -# CONFIG_FSCACHE_DEBUG is not set -# CONFIG_FSCACHE_OBJECT_LIST is not set -CONFIG_CACHEFILES=m -# CONFIG_CACHEFILES_DEBUG is not set -# CONFIG_CACHEFILES_HISTOGRAM is not set - -# -# CD-ROM/DVD Filesystems -# -CONFIG_ISO9660_FS=m -CONFIG_JOLIET=y -CONFIG_ZISOFS=y -CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y - -# -# DOS/FAT/NT Filesystems -# -CONFIG_FAT_FS=m -CONFIG_MSDOS_FS=m -CONFIG_VFAT_FS=m -CONFIG_FAT_DEFAULT_CODEPAGE=437 -CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" -CONFIG_NTFS_FS=m -# CONFIG_NTFS_DEBUG is not set -CONFIG_NTFS_RW=y - -# -# Pseudo filesystems -# -CONFIG_PROC_FS=y -CONFIG_PROC_KCORE=y -CONFIG_PROC_SYSCTL=y -CONFIG_PROC_PAGE_MONITOR=y -CONFIG_PROC_CHILDREN=y -CONFIG_KERNFS=y -CONFIG_SYSFS=y -CONFIG_TMPFS=y -CONFIG_TMPFS_POSIX_ACL=y -CONFIG_TMPFS_XATTR=y -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set -CONFIG_CONFIGFS_FS=y -CONFIG_EFIVAR_FS=m -CONFIG_MISC_FILESYSTEMS=y -CONFIG_ADFS_FS=m -# CONFIG_ADFS_FS_RW is not set -CONFIG_AFFS_FS=m -CONFIG_ECRYPT_FS=m -CONFIG_ECRYPT_FS_MESSAGING=y -CONFIG_HFS_FS=m -CONFIG_HFSPLUS_FS=m -# CONFIG_HFSPLUS_FS_POSIX_ACL is not set -CONFIG_BEFS_FS=m -# CONFIG_BEFS_DEBUG is not set -CONFIG_BFS_FS=m -CONFIG_EFS_FS=m -CONFIG_JFFS2_FS=m -CONFIG_JFFS2_FS_DEBUG=0 -CONFIG_JFFS2_FS_WRITEBUFFER=y -# CONFIG_JFFS2_FS_WBUF_VERIFY is not set -# CONFIG_JFFS2_SUMMARY is not set -# CONFIG_JFFS2_FS_XATTR is not set -# CONFIG_JFFS2_COMPRESSION_OPTIONS is not set -CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set -CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set -CONFIG_UBIFS_FS=m -CONFIG_UBIFS_FS_ADVANCED_COMPR=y -CONFIG_UBIFS_FS_LZO=y -CONFIG_UBIFS_FS_ZLIB=y -CONFIG_UBIFS_ATIME_SUPPORT=y -CONFIG_LOGFS=m -CONFIG_CRAMFS=m -CONFIG_SQUASHFS=m -# CONFIG_SQUASHFS_FILE_CACHE is not set -CONFIG_SQUASHFS_FILE_DIRECT=y -# CONFIG_SQUASHFS_DECOMP_SINGLE is not set -CONFIG_SQUASHFS_DECOMP_MULTI=y -# CONFIG_SQUASHFS_DECOMP_MULTI_PERCPU is not set -CONFIG_SQUASHFS_XATTR=y -CONFIG_SQUASHFS_ZLIB=y -CONFIG_SQUASHFS_LZ4=y -CONFIG_SQUASHFS_LZO=y -CONFIG_SQUASHFS_XZ=y -# CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set -CONFIG_SQUASHFS_EMBEDDED=y -CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 -CONFIG_VXFS_FS=m -CONFIG_MINIX_FS=m -CONFIG_OMFS_FS=m -CONFIG_HPFS_FS=m -CONFIG_QNX4FS_FS=m -CONFIG_QNX6FS_FS=m -# CONFIG_QNX6FS_DEBUG is not set -CONFIG_ROMFS_FS=y -CONFIG_ROMFS_BACKED_BY_BLOCK=y -CONFIG_ROMFS_ON_BLOCK=y -CONFIG_PSTORE=y -# CONFIG_PSTORE_CONSOLE is not set -# CONFIG_PSTORE_PMSG is not set -# CONFIG_PSTORE_FTRACE is not set -CONFIG_PSTORE_RAM=m -CONFIG_SYSV_FS=m -CONFIG_UFS_FS=m -# CONFIG_UFS_FS_WRITE is not set -# CONFIG_UFS_DEBUG is not set -CONFIG_EXOFS_FS=m -# CONFIG_EXOFS_DEBUG is not set -CONFIG_ORE=m -CONFIG_NETWORK_FILESYSTEMS=y -CONFIG_NFS_FS=y -CONFIG_NFS_V2=y -CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set -CONFIG_NFS_V4=y -CONFIG_NFS_SWAP=y -# CONFIG_NFS_V4_1 is not set -# CONFIG_NFS_USE_LEGACY_DNS is not set -CONFIG_NFS_USE_KERNEL_DNS=y -CONFIG_NFSD=m -CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set -CONFIG_NFSD_V4=y -CONFIG_NFSD_PNFS=y -# CONFIG_NFSD_V4_SECURITY_LABEL is not set -# CONFIG_NFSD_FAULT_INJECTION is not set -CONFIG_GRACE_PERIOD=y -CONFIG_LOCKD=y -CONFIG_LOCKD_V4=y -CONFIG_NFS_COMMON=y -CONFIG_SUNRPC=y -CONFIG_SUNRPC_GSS=y -CONFIG_SUNRPC_SWAP=y -CONFIG_RPCSEC_GSS_KRB5=m -# CONFIG_SUNRPC_DEBUG is not set -CONFIG_SUNRPC_XPRT_RDMA=m -CONFIG_CEPH_FS=m -CONFIG_CEPH_FSCACHE=y -CONFIG_CEPH_FS_POSIX_ACL=y -CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set -CONFIG_CIFS_WEAK_PW_HASH=y -# CONFIG_CIFS_UPCALL is not set -# CONFIG_CIFS_XATTR is not set -CONFIG_CIFS_DEBUG=y -# CONFIG_CIFS_DEBUG2 is not set -CONFIG_CIFS_DFS_UPCALL=y -CONFIG_CIFS_SMB2=y -# CONFIG_CIFS_SMB311 is not set -CONFIG_CIFS_FSCACHE=y -CONFIG_NCP_FS=m -CONFIG_NCPFS_PACKET_SIGNING=y -CONFIG_NCPFS_IOCTL_LOCKING=y -CONFIG_NCPFS_STRONG=y -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -CONFIG_NCPFS_SMALLDOS=y -CONFIG_NCPFS_NLS=y -CONFIG_NCPFS_EXTRAS=y -CONFIG_CODA_FS=m -CONFIG_AFS_FS=m -# CONFIG_AFS_DEBUG is not set -# CONFIG_AFS_FSCACHE is not set -CONFIG_9P_FS=m -# CONFIG_9P_FSCACHE is not set -# CONFIG_9P_FS_POSIX_ACL is not set -# CONFIG_9P_FS_SECURITY is not set -CONFIG_NLS=y -CONFIG_NLS_DEFAULT="utf8" -CONFIG_NLS_CODEPAGE_437=m -CONFIG_NLS_CODEPAGE_737=m -CONFIG_NLS_CODEPAGE_775=m -CONFIG_NLS_CODEPAGE_850=m -CONFIG_NLS_CODEPAGE_852=m -CONFIG_NLS_CODEPAGE_855=m -CONFIG_NLS_CODEPAGE_857=m -CONFIG_NLS_CODEPAGE_860=m -CONFIG_NLS_CODEPAGE_861=m -CONFIG_NLS_CODEPAGE_862=m -CONFIG_NLS_CODEPAGE_863=m -CONFIG_NLS_CODEPAGE_864=m -CONFIG_NLS_CODEPAGE_865=m -CONFIG_NLS_CODEPAGE_866=m -CONFIG_NLS_CODEPAGE_869=m -CONFIG_NLS_CODEPAGE_936=m -CONFIG_NLS_CODEPAGE_950=m -CONFIG_NLS_CODEPAGE_932=m -CONFIG_NLS_CODEPAGE_949=m -CONFIG_NLS_CODEPAGE_874=m -CONFIG_NLS_ISO8859_8=m -CONFIG_NLS_CODEPAGE_1250=m -CONFIG_NLS_CODEPAGE_1251=m -CONFIG_NLS_ASCII=m -CONFIG_NLS_ISO8859_1=m -CONFIG_NLS_ISO8859_2=m -CONFIG_NLS_ISO8859_3=m -CONFIG_NLS_ISO8859_4=m -CONFIG_NLS_ISO8859_5=m -CONFIG_NLS_ISO8859_6=m -CONFIG_NLS_ISO8859_7=m -CONFIG_NLS_ISO8859_9=m -CONFIG_NLS_ISO8859_13=m -CONFIG_NLS_ISO8859_14=m -CONFIG_NLS_ISO8859_15=m -CONFIG_NLS_KOI8_R=m -CONFIG_NLS_KOI8_U=m -CONFIG_NLS_MAC_ROMAN=m -CONFIG_NLS_MAC_CELTIC=m -CONFIG_NLS_MAC_CENTEURO=m -CONFIG_NLS_MAC_CROATIAN=m -CONFIG_NLS_MAC_CYRILLIC=m -CONFIG_NLS_MAC_GAELIC=m -CONFIG_NLS_MAC_GREEK=m -CONFIG_NLS_MAC_ICELAND=m -CONFIG_NLS_MAC_INUIT=m -CONFIG_NLS_MAC_ROMANIAN=m -CONFIG_NLS_MAC_TURKISH=m -CONFIG_NLS_UTF8=m -CONFIG_DLM=m -# CONFIG_DLM_DEBUG is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y - -# -# printk and dmesg options -# -CONFIG_PRINTK_TIME=y -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_DYNAMIC_DEBUG is not set - -# -# Compile-time checks and compiler options -# -# CONFIG_DEBUG_INFO is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=0 -CONFIG_STRIP_ASM_SYMS=y -# CONFIG_READABLE_ASM is not set -CONFIG_UNUSED_SYMBOLS=y -# CONFIG_PAGE_OWNER is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_SECTION_MISMATCH is not set -CONFIG_SECTION_MISMATCH_WARN_ONLY=y -CONFIG_ARCH_WANT_FRAME_POINTERS=y -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 -CONFIG_DEBUG_KERNEL=y - -# -# Memory Debugging -# -# CONFIG_PAGE_EXTENSION is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -CONFIG_HAVE_DEBUG_KMEMLEAK=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_VIRTUAL is not set -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_DEBUG_PER_CPU_MAPS is not set -# CONFIG_DEBUG_HIGHMEM is not set -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -CONFIG_HAVE_ARCH_KMEMCHECK=y -# CONFIG_DEBUG_SHIRQ is not set - -# -# Debug Lockups and Hangs -# -# CONFIG_LOCKUP_DETECTOR is not set -# CONFIG_DETECT_HUNG_TASK is not set -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -CONFIG_SCHED_DEBUG=y -CONFIG_SCHED_INFO=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_SCHED_STACK_END_CHECK is not set -# CONFIG_DEBUG_TIMEKEEPING is not set -# CONFIG_TIMER_STATS is not set - -# -# Lock Debugging (spinlocks, mutexes, etc...) -# -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_LOCK_TORTURE_TEST is not set -CONFIG_STACKTRACE=y -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_PI_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_DEBUG_CREDENTIALS is not set - -# -# RCU Debugging -# -# CONFIG_PROVE_RCU is not set -# CONFIG_SPARSE_RCU_POINTER is not set -# CONFIG_TORTURE_TEST is not set -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -# CONFIG_RCU_TRACE is not set -# CONFIG_RCU_EQS_DEBUG is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_NOTIFIER_ERROR_INJECTION is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y -# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set -CONFIG_USER_STACKTRACE_SUPPORT=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_TRACE_CLOCK=y -CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_RING_BUFFER_ALLOW_SWAP=y -CONFIG_TRACING=y -CONFIG_GENERIC_TRACER=y -CONFIG_TRACING_SUPPORT=y -CONFIG_FTRACE=y -CONFIG_FUNCTION_TRACER=y -CONFIG_FUNCTION_GRAPH_TRACER=y -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_FTRACE_SYSCALLS is not set -# CONFIG_TRACER_SNAPSHOT is not set -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set -# CONFIG_STACK_TRACER is not set -CONFIG_BLK_DEV_IO_TRACE=y -# CONFIG_UPROBE_EVENT is not set -# CONFIG_PROBE_EVENTS is not set -CONFIG_DYNAMIC_FTRACE=y -CONFIG_DYNAMIC_FTRACE_WITH_REGS=y -# CONFIG_FUNCTION_PROFILER is not set -CONFIG_FTRACE_MCOUNT_RECORD=y -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_MMIOTRACE is not set -# CONFIG_TRACEPOINT_BENCHMARK is not set -CONFIG_RING_BUFFER_BENCHMARK=m -# CONFIG_RING_BUFFER_STARTUP_TEST is not set -# CONFIG_TRACE_ENUM_MAP_FILE is not set -# CONFIG_TRACING_EVENTS_GPIO is not set - -# -# Runtime Testing -# -# CONFIG_LKDTM is not set -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_RBTREE_TEST is not set -# CONFIG_INTERVAL_TREE_TEST is not set -# CONFIG_PERCPU_TEST is not set -CONFIG_ATOMIC64_SELFTEST=y -CONFIG_ASYNC_RAID6_TEST=m -CONFIG_TEST_HEXDUMP=m -# CONFIG_TEST_STRING_HELPERS is not set -# CONFIG_TEST_KSTRTOX is not set -# CONFIG_TEST_PRINTF is not set -# CONFIG_TEST_RHASHTABLE is not set -# CONFIG_TEST_HASH is not set -# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set -# CONFIG_DMA_API_DEBUG is not set -CONFIG_TEST_LKM=m -CONFIG_TEST_USER_COPY=m -CONFIG_TEST_BPF=m -CONFIG_TEST_FIRMWARE=m -CONFIG_TEST_UDELAY=m -CONFIG_MEMTEST=y -# CONFIG_TEST_STATIC_KEYS is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_STRICT_DEVMEM=y -CONFIG_X86_VERBOSE_BOOTUP=y -CONFIG_EARLY_PRINTK=y -# CONFIG_EARLY_PRINTK_DBGP is not set -CONFIG_EARLY_PRINTK_EFI=y -# CONFIG_X86_PTDUMP_CORE is not set -# CONFIG_X86_PTDUMP is not set -# CONFIG_EFI_PGT_DUMP is not set -CONFIG_DEBUG_RODATA=y -CONFIG_DEBUG_RODATA_TEST=y -# CONFIG_DEBUG_WX is not set -# CONFIG_DEBUG_SET_MODULE_RONX is not set -# CONFIG_DEBUG_NX_TEST is not set -CONFIG_DOUBLEFAULT=y -# CONFIG_DEBUG_TLBFLUSH is not set -# CONFIG_IOMMU_STRESS is not set -CONFIG_HAVE_MMIOTRACE_SUPPORT=y -# CONFIG_X86_DECODER_SELFTEST is not set -CONFIG_IO_DELAY_TYPE_0X80=0 -CONFIG_IO_DELAY_TYPE_0XED=1 -CONFIG_IO_DELAY_TYPE_UDELAY=2 -CONFIG_IO_DELAY_TYPE_NONE=3 -CONFIG_IO_DELAY_0X80=y -# CONFIG_IO_DELAY_0XED is not set -# CONFIG_IO_DELAY_UDELAY is not set -# CONFIG_IO_DELAY_NONE is not set -CONFIG_DEFAULT_IO_DELAY_TYPE=0 -# CONFIG_DEBUG_BOOT_PARAMS is not set -# CONFIG_CPA_DEBUG is not set -CONFIG_OPTIMIZE_INLINING=y -# CONFIG_DEBUG_ENTRY is not set -# CONFIG_DEBUG_NMI_SELFTEST is not set -CONFIG_X86_DEBUG_FPU=y -# CONFIG_PUNIT_ATOM_DEBUG is not set - -# -# Security options -# -CONFIG_KEYS=y -# CONFIG_PERSISTENT_KEYRINGS is not set -# CONFIG_BIG_KEYS is not set -CONFIG_TRUSTED_KEYS=m -CONFIG_ENCRYPTED_KEYS=m -CONFIG_SECURITY_DMESG_RESTRICT=y -CONFIG_SECURITY=y -CONFIG_SECURITYFS=y -CONFIG_SECURITY_NETWORK=y -CONFIG_SECURITY_NETWORK_XFRM=y -# CONFIG_SECURITY_PATH is not set -# CONFIG_INTEL_TXT is not set -# CONFIG_SECURITY_SELINUX is not set -# CONFIG_SECURITY_SMACK is not set -# CONFIG_SECURITY_TOMOYO is not set -# CONFIG_SECURITY_APPARMOR is not set -# CONFIG_SECURITY_YAMA is not set -# CONFIG_INTEGRITY is not set -CONFIG_DEFAULT_SECURITY_DAC=y -CONFIG_DEFAULT_SECURITY="" -CONFIG_XOR_BLOCKS=y -CONFIG_ASYNC_CORE=y -CONFIG_ASYNC_MEMCPY=y -CONFIG_ASYNC_XOR=y -CONFIG_ASYNC_PQ=y -CONFIG_ASYNC_RAID6_RECOV=y -CONFIG_CRYPTO=y - -# -# Crypto core or helper -# -CONFIG_CRYPTO_ALGAPI=y -CONFIG_CRYPTO_ALGAPI2=y -CONFIG_CRYPTO_AEAD=y -CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y -CONFIG_CRYPTO_HASH=y -CONFIG_CRYPTO_HASH2=y -CONFIG_CRYPTO_RNG=y -CONFIG_CRYPTO_RNG2=y -CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_PCOMP=m -CONFIG_CRYPTO_PCOMP2=y -CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_AKCIPHER=m -CONFIG_CRYPTO_RSA=m -CONFIG_CRYPTO_MANAGER=y -CONFIG_CRYPTO_MANAGER2=y -CONFIG_CRYPTO_USER=m -CONFIG_CRYPTO_MANAGER_DISABLE_TESTS=y -CONFIG_CRYPTO_GF128MUL=y -CONFIG_CRYPTO_NULL=y -CONFIG_CRYPTO_NULL2=y -CONFIG_CRYPTO_PCRYPT=m -CONFIG_CRYPTO_WORKQUEUE=y -CONFIG_CRYPTO_CRYPTD=y -CONFIG_CRYPTO_MCRYPTD=m -CONFIG_CRYPTO_AUTHENC=y -CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_ABLK_HELPER=y -CONFIG_CRYPTO_GLUE_HELPER_X86=m - -# -# Authenticated Encryption with Associated Data -# -CONFIG_CRYPTO_CCM=y -CONFIG_CRYPTO_GCM=y -CONFIG_CRYPTO_CHACHA20POLY1305=m -CONFIG_CRYPTO_SEQIV=y -CONFIG_CRYPTO_ECHAINIV=m - -# -# Block modes -# -CONFIG_CRYPTO_CBC=y -CONFIG_CRYPTO_CTR=y -CONFIG_CRYPTO_CTS=y -CONFIG_CRYPTO_ECB=y -CONFIG_CRYPTO_LRW=y -CONFIG_CRYPTO_PCBC=y -CONFIG_CRYPTO_XTS=y -CONFIG_CRYPTO_KEYWRAP=m - -# -# Hash modes -# -CONFIG_CRYPTO_CMAC=m -CONFIG_CRYPTO_HMAC=y -CONFIG_CRYPTO_XCBC=m -CONFIG_CRYPTO_VMAC=m - -# -# Digest -# -CONFIG_CRYPTO_CRC32C=y -CONFIG_CRYPTO_CRC32C_INTEL=y -CONFIG_CRYPTO_CRC32=m -CONFIG_CRYPTO_CRC32_PCLMUL=m -CONFIG_CRYPTO_CRCT10DIF=y -CONFIG_CRYPTO_GHASH=y -CONFIG_CRYPTO_POLY1305=m -CONFIG_CRYPTO_MD4=y -CONFIG_CRYPTO_MD5=y -CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_RMD128=m -CONFIG_CRYPTO_RMD160=y -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m -CONFIG_CRYPTO_SHA1=y -CONFIG_CRYPTO_SHA256=y -CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_TGR192=y -CONFIG_CRYPTO_WP512=y - -# -# Ciphers -# -CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_AES_586=y -CONFIG_CRYPTO_AES_NI_INTEL=y -CONFIG_CRYPTO_ANUBIS=y -CONFIG_CRYPTO_ARC4=y -CONFIG_CRYPTO_BLOWFISH=y -CONFIG_CRYPTO_BLOWFISH_COMMON=y -CONFIG_CRYPTO_CAMELLIA=y -CONFIG_CRYPTO_CAST_COMMON=y -CONFIG_CRYPTO_CAST5=y -CONFIG_CRYPTO_CAST6=y -CONFIG_CRYPTO_DES=y -CONFIG_CRYPTO_FCRYPT=y -CONFIG_CRYPTO_KHAZAD=y -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_SALSA20_586=m -CONFIG_CRYPTO_CHACHA20=m -CONFIG_CRYPTO_SEED=y -CONFIG_CRYPTO_SERPENT=y -CONFIG_CRYPTO_SERPENT_SSE2_586=m -CONFIG_CRYPTO_TEA=y -CONFIG_CRYPTO_TWOFISH=y -CONFIG_CRYPTO_TWOFISH_COMMON=y -CONFIG_CRYPTO_TWOFISH_586=y - -# -# Compression -# -CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_ZLIB=m -CONFIG_CRYPTO_LZO=m -CONFIG_CRYPTO_842=m -CONFIG_CRYPTO_LZ4=m -CONFIG_CRYPTO_LZ4HC=m - -# -# Random Number Generation -# -CONFIG_CRYPTO_ANSI_CPRNG=m -CONFIG_CRYPTO_DRBG_MENU=y -CONFIG_CRYPTO_DRBG_HMAC=y -CONFIG_CRYPTO_DRBG_HASH=y -CONFIG_CRYPTO_DRBG_CTR=y -CONFIG_CRYPTO_DRBG=y -CONFIG_CRYPTO_JITTERENTROPY=y -CONFIG_CRYPTO_USER_API=m -CONFIG_CRYPTO_USER_API_HASH=m -CONFIG_CRYPTO_USER_API_SKCIPHER=m -CONFIG_CRYPTO_USER_API_RNG=m -CONFIG_CRYPTO_USER_API_AEAD=m -CONFIG_CRYPTO_HASH_INFO=y -CONFIG_CRYPTO_HW=y -CONFIG_CRYPTO_DEV_PADLOCK=m -CONFIG_CRYPTO_DEV_PADLOCK_AES=m -CONFIG_CRYPTO_DEV_PADLOCK_SHA=m -CONFIG_CRYPTO_DEV_GEODE=m -CONFIG_CRYPTO_DEV_CCP=y -CONFIG_CRYPTO_DEV_CCP_DD=m -CONFIG_CRYPTO_DEV_CCP_CRYPTO=m -CONFIG_CRYPTO_DEV_QAT=m -CONFIG_CRYPTO_DEV_QAT_DH895xCC=m -CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m -CONFIG_ASYMMETRIC_KEY_TYPE=m -CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m -CONFIG_PUBLIC_KEY_ALGO_RSA=m -CONFIG_X509_CERTIFICATE_PARSER=m -CONFIG_PKCS7_MESSAGE_PARSER=m -CONFIG_PKCS7_TEST_KEY=m - -# -# Certificates for signature checking -# -CONFIG_SYSTEM_TRUSTED_KEYRING=y -CONFIG_SYSTEM_TRUSTED_KEYS="" -CONFIG_HAVE_KVM=y -CONFIG_HAVE_KVM_IRQCHIP=y -CONFIG_HAVE_KVM_IRQFD=y -CONFIG_HAVE_KVM_IRQ_ROUTING=y -CONFIG_HAVE_KVM_EVENTFD=y -CONFIG_KVM_APIC_ARCHITECTURE=y -CONFIG_KVM_MMIO=y -CONFIG_KVM_ASYNC_PF=y -CONFIG_HAVE_KVM_MSI=y -CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y -CONFIG_KVM_VFIO=y -CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y -CONFIG_HAVE_KVM_IRQ_BYPASS=y -CONFIG_VIRTUALIZATION=y -CONFIG_KVM=m -CONFIG_KVM_INTEL=m -CONFIG_KVM_AMD=m -CONFIG_KVM_MMU_AUDIT=y -CONFIG_KVM_DEVICE_ASSIGNMENT=y -CONFIG_LGUEST=m -CONFIG_BINARY_PRINTF=y - -# -# Library routines -# -CONFIG_RAID6_PQ=y -CONFIG_BITREVERSE=y -# CONFIG_HAVE_ARCH_BITREVERSE is not set -CONFIG_RATIONAL=y -CONFIG_GENERIC_STRNCPY_FROM_USER=y -CONFIG_GENERIC_STRNLEN_USER=y -CONFIG_GENERIC_NET_UTILS=y -CONFIG_GENERIC_FIND_FIRST_BIT=y -CONFIG_GENERIC_PCI_IOMAP=y -CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_IO=y -CONFIG_ARCH_HAS_FAST_MULTIPLIER=y -CONFIG_CRC_CCITT=m -CONFIG_CRC16=y -CONFIG_CRC_T10DIF=y -CONFIG_CRC_ITU_T=y -CONFIG_CRC32=y -# CONFIG_CRC32_SELFTEST is not set -CONFIG_CRC32_SLICEBY8=y -# CONFIG_CRC32_SLICEBY4 is not set -# CONFIG_CRC32_SARWATE is not set -# CONFIG_CRC32_BIT is not set -CONFIG_CRC7=m -CONFIG_LIBCRC32C=y -CONFIG_CRC8=m -CONFIG_AUDIT_GENERIC=y -# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set -# CONFIG_RANDOM32_SELFTEST is not set -CONFIG_842_COMPRESS=m -CONFIG_842_DECOMPRESS=m -CONFIG_ZLIB_INFLATE=y -CONFIG_ZLIB_DEFLATE=y -CONFIG_LZO_COMPRESS=y -CONFIG_LZO_DECOMPRESS=y -CONFIG_LZ4_COMPRESS=m -CONFIG_LZ4HC_COMPRESS=m -CONFIG_LZ4_DECOMPRESS=y -CONFIG_XZ_DEC=y -CONFIG_XZ_DEC_X86=y -CONFIG_XZ_DEC_POWERPC=y -CONFIG_XZ_DEC_IA64=y -CONFIG_XZ_DEC_ARM=y -CONFIG_XZ_DEC_ARMTHUMB=y -CONFIG_XZ_DEC_SPARC=y -CONFIG_XZ_DEC_BCJ=y -# CONFIG_XZ_DEC_TEST is not set -CONFIG_DECOMPRESS_GZIP=y -CONFIG_DECOMPRESS_BZIP2=y -CONFIG_DECOMPRESS_LZMA=y -CONFIG_DECOMPRESS_XZ=y -CONFIG_DECOMPRESS_LZO=y -CONFIG_DECOMPRESS_LZ4=y -CONFIG_GENERIC_ALLOCATOR=y -CONFIG_REED_SOLOMON=m -CONFIG_REED_SOLOMON_ENC8=y -CONFIG_REED_SOLOMON_DEC8=y -CONFIG_REED_SOLOMON_DEC16=y -CONFIG_BCH=m -CONFIG_BCH_CONST_PARAMS=y -CONFIG_TEXTSEARCH=y -CONFIG_TEXTSEARCH_KMP=m -CONFIG_TEXTSEARCH_BM=m -CONFIG_TEXTSEARCH_FSM=m -CONFIG_BTREE=y -CONFIG_INTERVAL_TREE=y -CONFIG_ASSOCIATIVE_ARRAY=y -CONFIG_HAS_IOMEM=y -CONFIG_HAS_IOPORT_MAP=y -CONFIG_HAS_DMA=y -CONFIG_CHECK_SIGNATURE=y -CONFIG_CPU_RMAP=y -CONFIG_DQL=y -CONFIG_GLOB=y -# CONFIG_GLOB_SELFTEST is not set -CONFIG_NLATTR=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y -CONFIG_LRU_CACHE=m -CONFIG_CLZ_TAB=y -CONFIG_CORDIC=m -# CONFIG_DDR is not set -CONFIG_MPILIB=m -CONFIG_OID_REGISTRY=y -CONFIG_UCS2_STRING=y -CONFIG_FONT_SUPPORT=y -CONFIG_FONTS=y -CONFIG_FONT_8x8=y -CONFIG_FONT_8x16=y -# CONFIG_FONT_6x11 is not set -# CONFIG_FONT_7x14 is not set -# CONFIG_FONT_PEARL_8x8 is not set -# CONFIG_FONT_ACORN_8x8 is not set -# CONFIG_FONT_MINI_4x6 is not set -# CONFIG_FONT_6x10 is not set -CONFIG_FONT_SUN8x16=y -# CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -# CONFIG_SG_SPLIT is not set -CONFIG_ARCH_HAS_SG_CHAIN=y -CONFIG_ARCH_HAS_MMIO_FLUSH=y diff --git a/system/xen/dom0/config-4.4.240-xen.x86_64 b/system/xen/dom0/config-5.13.8-xen.x86_64 index ea3a34d322a33..94d893f068f4d 100644 --- a/system/xen/dom0/config-4.4.240-xen.x86_64 +++ b/system/xen/dom0/config-5.13.8-xen.x86_64 @@ -1,106 +1,93 @@ # # Automatically generated file; DO NOT EDIT. -# Linux/x86 4.4.240 Kernel Configuration -# -CONFIG_64BIT=y -CONFIG_X86_64=y -CONFIG_X86=y -CONFIG_INSTRUCTION_DECODER=y -CONFIG_PERF_EVENTS_INTEL_UNCORE=y -CONFIG_OUTPUT_FORMAT="elf64-x86-64" -CONFIG_ARCH_DEFCONFIG="arch/x86/configs/x86_64_defconfig" -CONFIG_LOCKDEP_SUPPORT=y -CONFIG_STACKTRACE_SUPPORT=y -CONFIG_HAVE_LATENCYTOP_SUPPORT=y -CONFIG_MMU=y -CONFIG_NEED_DMA_MAP_STATE=y -CONFIG_NEED_SG_DMA_LENGTH=y -CONFIG_GENERIC_ISA_DMA=y -CONFIG_GENERIC_BUG=y -CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y -CONFIG_GENERIC_HWEIGHT=y -CONFIG_ARCH_MAY_HAVE_PC_FDC=y -CONFIG_RWSEM_XCHGADD_ALGORITHM=y -CONFIG_GENERIC_CALIBRATE_DELAY=y -CONFIG_ARCH_HAS_CPU_RELAX=y -CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y -CONFIG_HAVE_SETUP_PER_CPU_AREA=y -CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y -CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y -CONFIG_ARCH_HIBERNATION_POSSIBLE=y -CONFIG_ARCH_SUSPEND_POSSIBLE=y -CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y -CONFIG_ARCH_WANT_GENERAL_HUGETLB=y -CONFIG_ZONE_DMA32=y -CONFIG_AUDIT_ARCH=y -CONFIG_ARCH_SUPPORTS_OPTIMIZED_INLINING=y -CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y -CONFIG_HAVE_INTEL_TXT=y -CONFIG_X86_64_SMP=y -CONFIG_ARCH_SUPPORTS_UPROBES=y -CONFIG_FIX_EARLYCON_MEM=y -CONFIG_PGTABLE_LEVELS=4 -CONFIG_DEFCONFIG_LIST="/lib/modules/$UNAME_RELEASE/.config" +# Linux/x86 5.13.8 Kernel Configuration +# +CONFIG_CC_VERSION_TEXT="gcc (GCC) 10.3.0" +CONFIG_CC_IS_GCC=y +CONFIG_GCC_VERSION=100300 +CONFIG_CLANG_VERSION=0 +CONFIG_AS_IS_GNU=y +CONFIG_AS_VERSION=23601 +CONFIG_LD_IS_BFD=y +CONFIG_LD_VERSION=23601 +CONFIG_LLD_VERSION=0 +CONFIG_CC_CAN_LINK=y +CONFIG_CC_CAN_LINK_STATIC=y +CONFIG_CC_HAS_ASM_GOTO=y +CONFIG_CC_HAS_ASM_INLINE=y CONFIG_IRQ_WORK=y -CONFIG_BUILDTIME_EXTABLE_SORT=y +CONFIG_BUILDTIME_TABLE_SORT=y +CONFIG_THREAD_INFO_IN_TASK=y # # General setup # CONFIG_INIT_ENV_ARG_LIMIT=32 -CONFIG_CROSS_COMPILE="" # CONFIG_COMPILE_TEST is not set CONFIG_LOCALVERSION="-xen" # CONFIG_LOCALVERSION_AUTO is not set +CONFIG_BUILD_SALT="" CONFIG_HAVE_KERNEL_GZIP=y CONFIG_HAVE_KERNEL_BZIP2=y CONFIG_HAVE_KERNEL_LZMA=y CONFIG_HAVE_KERNEL_XZ=y CONFIG_HAVE_KERNEL_LZO=y CONFIG_HAVE_KERNEL_LZ4=y +CONFIG_HAVE_KERNEL_ZSTD=y # CONFIG_KERNEL_GZIP is not set # CONFIG_KERNEL_BZIP2 is not set CONFIG_KERNEL_LZMA=y # CONFIG_KERNEL_XZ is not set # CONFIG_KERNEL_LZO is not set # CONFIG_KERNEL_LZ4 is not set +# CONFIG_KERNEL_ZSTD is not set +CONFIG_DEFAULT_INIT="" CONFIG_DEFAULT_HOSTNAME="darkstar" CONFIG_SWAP=y CONFIG_SYSVIPC=y CONFIG_SYSVIPC_SYSCTL=y CONFIG_POSIX_MQUEUE=y CONFIG_POSIX_MQUEUE_SYSCTL=y +CONFIG_WATCH_QUEUE=y CONFIG_CROSS_MEMORY_ATTACH=y -CONFIG_FHANDLE=y # CONFIG_USELIB is not set CONFIG_AUDIT=y CONFIG_HAVE_ARCH_AUDITSYSCALL=y CONFIG_AUDITSYSCALL=y -CONFIG_AUDIT_WATCH=y -CONFIG_AUDIT_TREE=y # # IRQ subsystem # CONFIG_GENERIC_IRQ_PROBE=y CONFIG_GENERIC_IRQ_SHOW=y +CONFIG_GENERIC_IRQ_EFFECTIVE_AFF_MASK=y CONFIG_GENERIC_PENDING_IRQ=y +CONFIG_GENERIC_IRQ_MIGRATION=y +CONFIG_GENERIC_IRQ_INJECTION=y +CONFIG_HARDIRQS_SW_RESEND=y CONFIG_GENERIC_IRQ_CHIP=y CONFIG_IRQ_DOMAIN=y CONFIG_IRQ_DOMAIN_HIERARCHY=y CONFIG_GENERIC_MSI_IRQ=y CONFIG_GENERIC_MSI_IRQ_DOMAIN=y -# CONFIG_IRQ_DOMAIN_DEBUG is not set +CONFIG_IRQ_MSI_IOMMU=y +CONFIG_GENERIC_IRQ_MATRIX_ALLOCATOR=y +CONFIG_GENERIC_IRQ_RESERVATION_MODE=y CONFIG_IRQ_FORCED_THREADING=y CONFIG_SPARSE_IRQ=y +# CONFIG_GENERIC_IRQ_DEBUGFS is not set +# end of IRQ subsystem + CONFIG_CLOCKSOURCE_WATCHDOG=y -CONFIG_ARCH_CLOCKSOURCE_DATA=y +CONFIG_ARCH_CLOCKSOURCE_INIT=y CONFIG_CLOCKSOURCE_VALIDATE_LAST_CYCLE=y CONFIG_GENERIC_TIME_VSYSCALL=y CONFIG_GENERIC_CLOCKEVENTS=y CONFIG_GENERIC_CLOCKEVENTS_BROADCAST=y CONFIG_GENERIC_CLOCKEVENTS_MIN_ADJUST=y CONFIG_GENERIC_CMOS_UPDATE=y +CONFIG_HAVE_POSIX_CPU_TIMERS_TASK_WORK=y +CONFIG_POSIX_CPU_TIMERS_TASK_WORK=y # # Timers subsystem @@ -112,6 +99,29 @@ CONFIG_NO_HZ_IDLE=y # CONFIG_NO_HZ_FULL is not set CONFIG_NO_HZ=y CONFIG_HIGH_RES_TIMERS=y +# end of Timers subsystem + +CONFIG_BPF=y +CONFIG_HAVE_EBPF_JIT=y +CONFIG_ARCH_WANT_DEFAULT_BPF_JIT=y + +# +# BPF subsystem +# +CONFIG_BPF_SYSCALL=y +CONFIG_BPF_JIT=y +CONFIG_BPF_JIT_ALWAYS_ON=y +CONFIG_BPF_JIT_DEFAULT_ON=y +CONFIG_BPF_UNPRIV_DEFAULT_OFF=y +CONFIG_USERMODE_DRIVER=y +CONFIG_BPF_PRELOAD=y +CONFIG_BPF_PRELOAD_UMD=m +CONFIG_BPF_LSM=y +# end of BPF subsystem + +CONFIG_PREEMPT_NONE=y +# CONFIG_PREEMPT_VOLUNTARY is not set +# CONFIG_PREEMPT is not set # # CPU/Task time and stats accounting @@ -119,60 +129,90 @@ CONFIG_HIGH_RES_TIMERS=y CONFIG_TICK_CPU_ACCOUNTING=y # CONFIG_VIRT_CPU_ACCOUNTING_GEN is not set # CONFIG_IRQ_TIME_ACCOUNTING is not set +CONFIG_HAVE_SCHED_AVG_IRQ=y CONFIG_BSD_PROCESS_ACCT=y CONFIG_BSD_PROCESS_ACCT_V3=y CONFIG_TASKSTATS=y CONFIG_TASK_DELAY_ACCT=y CONFIG_TASK_XACCT=y CONFIG_TASK_IO_ACCOUNTING=y +CONFIG_PSI=y +# CONFIG_PSI_DEFAULT_DISABLED is not set +# end of CPU/Task time and stats accounting + +CONFIG_CPU_ISOLATION=y # # RCU Subsystem # CONFIG_TREE_RCU=y -# CONFIG_RCU_EXPERT is not set +CONFIG_RCU_EXPERT=y CONFIG_SRCU=y -# CONFIG_TASKS_RCU is not set +CONFIG_TREE_SRCU=y +CONFIG_TASKS_RCU_GENERIC=y +CONFIG_TASKS_RUDE_RCU=y +CONFIG_TASKS_TRACE_RCU=y CONFIG_RCU_STALL_COMMON=y -# CONFIG_TREE_RCU_TRACE is not set -# CONFIG_RCU_EXPEDITE_BOOT is not set +CONFIG_RCU_NEED_SEGCBLIST=y +CONFIG_RCU_FANOUT=32 +CONFIG_RCU_FANOUT_LEAF=16 +CONFIG_RCU_FAST_NO_HZ=y +CONFIG_RCU_NOCB_CPU=y +# CONFIG_TASKS_TRACE_RCU_READ_MB is not set +# end of RCU Subsystem + CONFIG_BUILD_BIN2C=y CONFIG_IKCONFIG=y CONFIG_IKCONFIG_PROC=y +CONFIG_IKHEADERS=m CONFIG_LOG_BUF_SHIFT=18 CONFIG_LOG_CPU_MAX_BUF_SHIFT=12 +CONFIG_PRINTK_SAFE_LOG_BUF_SHIFT=12 CONFIG_HAVE_UNSTABLE_SCHED_CLOCK=y + +# +# Scheduler features +# +# CONFIG_UCLAMP_TASK is not set +# end of Scheduler features + CONFIG_ARCH_SUPPORTS_NUMA_BALANCING=y CONFIG_ARCH_WANT_BATCHED_UNMAP_TLB_FLUSH=y +CONFIG_CC_HAS_INT128=y CONFIG_ARCH_SUPPORTS_INT128=y +# CONFIG_NUMA_BALANCING is not set CONFIG_CGROUPS=y -# CONFIG_CGROUP_DEBUG is not set -CONFIG_CGROUP_FREEZER=y -CONFIG_CGROUP_PIDS=y -CONFIG_CGROUP_DEVICE=y -CONFIG_CPUSETS=y -CONFIG_PROC_PID_CPUSET=y -CONFIG_CGROUP_CPUACCT=y CONFIG_PAGE_COUNTER=y CONFIG_MEMCG=y CONFIG_MEMCG_SWAP=y -# CONFIG_MEMCG_SWAP_ENABLED is not set CONFIG_MEMCG_KMEM=y -CONFIG_CGROUP_PERF=y +CONFIG_BLK_CGROUP=y +CONFIG_CGROUP_WRITEBACK=y CONFIG_CGROUP_SCHED=y CONFIG_FAIR_GROUP_SCHED=y CONFIG_CFS_BANDWIDTH=y CONFIG_RT_GROUP_SCHED=y -CONFIG_BLK_CGROUP=y -# CONFIG_DEBUG_BLK_CGROUP is not set -CONFIG_CGROUP_WRITEBACK=y -CONFIG_CHECKPOINT_RESTORE=y +CONFIG_CGROUP_PIDS=y +# CONFIG_CGROUP_RDMA is not set +CONFIG_CGROUP_FREEZER=y +# CONFIG_CGROUP_HUGETLB is not set +CONFIG_CPUSETS=y +CONFIG_PROC_PID_CPUSET=y +CONFIG_CGROUP_DEVICE=y +CONFIG_CGROUP_CPUACCT=y +CONFIG_CGROUP_PERF=y +CONFIG_CGROUP_BPF=y +CONFIG_CGROUP_MISC=y +# CONFIG_CGROUP_DEBUG is not set +CONFIG_SOCK_CGROUP_DATA=y CONFIG_NAMESPACES=y CONFIG_UTS_NS=y +CONFIG_TIME_NS=y CONFIG_IPC_NS=y CONFIG_USER_NS=y CONFIG_PID_NS=y CONFIG_NET_NS=y +CONFIG_CHECKPOINT_RESTORE=y # CONFIG_SCHED_AUTOGROUP is not set # CONFIG_SYSFS_DEPRECATED is not set CONFIG_RELAY=y @@ -184,192 +224,111 @@ CONFIG_RD_LZMA=y CONFIG_RD_XZ=y CONFIG_RD_LZO=y CONFIG_RD_LZ4=y +CONFIG_RD_ZSTD=y +CONFIG_BOOT_CONFIG=y CONFIG_CC_OPTIMIZE_FOR_PERFORMANCE=y # CONFIG_CC_OPTIMIZE_FOR_SIZE is not set +CONFIG_LD_ORPHAN_WARN=y CONFIG_SYSCTL=y -CONFIG_ANON_INODES=y CONFIG_HAVE_UID16=y CONFIG_SYSCTL_EXCEPTION_TRACE=y CONFIG_HAVE_PCSPKR_PLATFORM=y -CONFIG_BPF=y CONFIG_EXPERT=y CONFIG_UID16=y CONFIG_MULTIUSER=y CONFIG_SGETMASK_SYSCALL=y CONFIG_SYSFS_SYSCALL=y -# CONFIG_SYSCTL_SYSCALL is not set -CONFIG_KALLSYMS=y -CONFIG_KALLSYMS_ALL=y +CONFIG_FHANDLE=y +CONFIG_POSIX_TIMERS=y CONFIG_PRINTK=y +CONFIG_PRINTK_NMI=y CONFIG_BUG=y CONFIG_ELF_CORE=y CONFIG_PCSPKR_PLATFORM=y CONFIG_BASE_FULL=y CONFIG_FUTEX=y +CONFIG_FUTEX_PI=y CONFIG_EPOLL=y CONFIG_SIGNALFD=y CONFIG_TIMERFD=y CONFIG_EVENTFD=y -# CONFIG_BPF_SYSCALL is not set CONFIG_SHMEM=y CONFIG_AIO=y +CONFIG_IO_URING=y CONFIG_ADVISE_SYSCALLS=y -CONFIG_USERFAULTFD=y -CONFIG_PCI_QUIRKS=y +CONFIG_HAVE_ARCH_USERFAULTFD_WP=y +CONFIG_HAVE_ARCH_USERFAULTFD_MINOR=y CONFIG_MEMBARRIER=y +CONFIG_KALLSYMS=y +CONFIG_KALLSYMS_ALL=y +CONFIG_KALLSYMS_ABSOLUTE_PERCPU=y +CONFIG_KALLSYMS_BASE_RELATIVE=y +CONFIG_USERFAULTFD=y +CONFIG_ARCH_HAS_MEMBARRIER_SYNC_CORE=y +CONFIG_KCMP=y +CONFIG_RSEQ=y +# CONFIG_DEBUG_RSEQ is not set # CONFIG_EMBEDDED is not set CONFIG_HAVE_PERF_EVENTS=y +# CONFIG_PC104 is not set # # Kernel Performance Events And Counters # CONFIG_PERF_EVENTS=y # CONFIG_DEBUG_PERF_USE_VMALLOC is not set +# end of Kernel Performance Events And Counters + CONFIG_VM_EVENT_COUNTERS=y CONFIG_SLUB_DEBUG=y # CONFIG_COMPAT_BRK is not set # CONFIG_SLAB is not set CONFIG_SLUB=y # CONFIG_SLOB is not set +CONFIG_SLAB_MERGE_DEFAULT=y +CONFIG_SLAB_FREELIST_RANDOM=y +CONFIG_SLAB_FREELIST_HARDENED=y +CONFIG_SHUFFLE_PAGE_ALLOCATOR=y CONFIG_SLUB_CPU_PARTIAL=y -# CONFIG_SYSTEM_DATA_VERIFICATION is not set +CONFIG_SYSTEM_DATA_VERIFICATION=y CONFIG_PROFILING=y CONFIG_TRACEPOINTS=y -CONFIG_KEXEC_CORE=y -CONFIG_OPROFILE=m -# CONFIG_OPROFILE_EVENT_MULTIPLEX is not set -CONFIG_HAVE_OPROFILE=y -CONFIG_OPROFILE_NMI_TIMER=y -# CONFIG_KPROBES is not set -# CONFIG_JUMP_LABEL is not set -# CONFIG_UPROBES is not set -# CONFIG_HAVE_64BIT_ALIGNED_ACCESS is not set -CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y -CONFIG_ARCH_USE_BUILTIN_BSWAP=y -CONFIG_USER_RETURN_NOTIFIER=y -CONFIG_HAVE_IOREMAP_PROT=y -CONFIG_HAVE_KPROBES=y -CONFIG_HAVE_KRETPROBES=y -CONFIG_HAVE_OPTPROBES=y -CONFIG_HAVE_KPROBES_ON_FTRACE=y -CONFIG_HAVE_ARCH_TRACEHOOK=y -CONFIG_HAVE_DMA_ATTRS=y -CONFIG_HAVE_DMA_CONTIGUOUS=y -CONFIG_GENERIC_SMP_IDLE_THREAD=y -CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y -CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y -CONFIG_HAVE_CLK=y -CONFIG_HAVE_DMA_API_DEBUG=y -CONFIG_HAVE_HW_BREAKPOINT=y -CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y -CONFIG_HAVE_USER_RETURN_NOTIFIER=y -CONFIG_HAVE_PERF_EVENTS_NMI=y -CONFIG_HAVE_PERF_REGS=y -CONFIG_HAVE_PERF_USER_STACK_DUMP=y -CONFIG_HAVE_ARCH_JUMP_LABEL=y -CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y -CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y -CONFIG_HAVE_CMPXCHG_LOCAL=y -CONFIG_HAVE_CMPXCHG_DOUBLE=y -CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y -CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y -CONFIG_HAVE_ARCH_SECCOMP_FILTER=y -CONFIG_SECCOMP_FILTER=y -CONFIG_HAVE_CC_STACKPROTECTOR=y -CONFIG_CC_STACKPROTECTOR=y -# CONFIG_CC_STACKPROTECTOR_NONE is not set -CONFIG_CC_STACKPROTECTOR_REGULAR=y -# CONFIG_CC_STACKPROTECTOR_STRONG is not set -CONFIG_HAVE_CONTEXT_TRACKING=y -CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y -CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y -CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y -CONFIG_HAVE_ARCH_HUGE_VMAP=y -CONFIG_HAVE_ARCH_SOFT_DIRTY=y -CONFIG_MODULES_USE_ELF_RELA=y -CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y -CONFIG_ARCH_HAS_ELF_RANDOMIZE=y -CONFIG_HAVE_COPY_THREAD_TLS=y -CONFIG_OLD_SIGSUSPEND3=y -CONFIG_COMPAT_OLD_SIGACTION=y - -# -# GCOV-based kernel profiling -# -# CONFIG_GCOV_KERNEL is not set -CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y -# CONFIG_HAVE_GENERIC_DMA_COHERENT is not set -CONFIG_SLABINFO=y -CONFIG_RT_MUTEXES=y -CONFIG_BASE_SMALL=0 -CONFIG_MODULES=y -CONFIG_MODULE_FORCE_LOAD=y -CONFIG_MODULE_UNLOAD=y -CONFIG_MODULE_FORCE_UNLOAD=y -# CONFIG_MODVERSIONS is not set -# CONFIG_MODULE_SRCVERSION_ALL is not set -# CONFIG_MODULE_SIG is not set -# CONFIG_MODULE_COMPRESS is not set -CONFIG_MODULES_TREE_LOOKUP=y -CONFIG_BLOCK=y -CONFIG_BLK_DEV_BSG=y -CONFIG_BLK_DEV_BSGLIB=y -CONFIG_BLK_DEV_INTEGRITY=y -CONFIG_BLK_DEV_THROTTLING=y -# CONFIG_BLK_CMDLINE_PARSER is not set - -# -# Partition Types -# -CONFIG_PARTITION_ADVANCED=y -# CONFIG_ACORN_PARTITION is not set -CONFIG_AIX_PARTITION=y -CONFIG_OSF_PARTITION=y -CONFIG_AMIGA_PARTITION=y -# CONFIG_ATARI_PARTITION is not set -CONFIG_MAC_PARTITION=y -CONFIG_MSDOS_PARTITION=y -CONFIG_BSD_DISKLABEL=y -CONFIG_MINIX_SUBPARTITION=y -CONFIG_SOLARIS_X86_PARTITION=y -CONFIG_UNIXWARE_DISKLABEL=y -# CONFIG_LDM_PARTITION is not set -CONFIG_SGI_PARTITION=y -# CONFIG_ULTRIX_PARTITION is not set -CONFIG_SUN_PARTITION=y -CONFIG_KARMA_PARTITION=y -CONFIG_EFI_PARTITION=y -# CONFIG_SYSV68_PARTITION is not set -# CONFIG_CMDLINE_PARTITION is not set -CONFIG_BLOCK_COMPAT=y +# end of General setup -# -# IO Schedulers -# -CONFIG_IOSCHED_NOOP=y -CONFIG_IOSCHED_DEADLINE=y -CONFIG_IOSCHED_CFQ=y -CONFIG_CFQ_GROUP_IOSCHED=y -# CONFIG_DEFAULT_DEADLINE is not set -CONFIG_DEFAULT_CFQ=y -# CONFIG_DEFAULT_NOOP is not set -CONFIG_DEFAULT_IOSCHED="cfq" -CONFIG_PREEMPT_NOTIFIERS=y -CONFIG_PADATA=y -CONFIG_ASN1=m -CONFIG_UNINLINE_SPIN_UNLOCK=y -CONFIG_INLINE_SPIN_UNLOCK_IRQ=y -CONFIG_INLINE_READ_UNLOCK=y -CONFIG_INLINE_READ_UNLOCK_IRQ=y -CONFIG_INLINE_WRITE_UNLOCK=y -CONFIG_INLINE_WRITE_UNLOCK_IRQ=y -CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y -CONFIG_MUTEX_SPIN_ON_OWNER=y -CONFIG_RWSEM_SPIN_ON_OWNER=y -CONFIG_LOCK_SPIN_ON_OWNER=y -CONFIG_ARCH_USE_QUEUED_RWLOCKS=y -CONFIG_QUEUED_RWLOCKS=y -CONFIG_FREEZER=y +CONFIG_64BIT=y +CONFIG_X86_64=y +CONFIG_X86=y +CONFIG_INSTRUCTION_DECODER=y +CONFIG_OUTPUT_FORMAT="elf64-x86-64" +CONFIG_LOCKDEP_SUPPORT=y +CONFIG_STACKTRACE_SUPPORT=y +CONFIG_MMU=y +CONFIG_ARCH_MMAP_RND_BITS_MIN=28 +CONFIG_ARCH_MMAP_RND_BITS_MAX=32 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MIN=8 +CONFIG_ARCH_MMAP_RND_COMPAT_BITS_MAX=16 +CONFIG_GENERIC_ISA_DMA=y +CONFIG_GENERIC_BUG=y +CONFIG_GENERIC_BUG_RELATIVE_POINTERS=y +CONFIG_ARCH_MAY_HAVE_PC_FDC=y +CONFIG_GENERIC_CALIBRATE_DELAY=y +CONFIG_ARCH_HAS_CPU_RELAX=y +CONFIG_ARCH_HAS_FILTER_PGPROT=y +CONFIG_HAVE_SETUP_PER_CPU_AREA=y +CONFIG_NEED_PER_CPU_EMBED_FIRST_CHUNK=y +CONFIG_NEED_PER_CPU_PAGE_FIRST_CHUNK=y +CONFIG_ARCH_HIBERNATION_POSSIBLE=y +CONFIG_ARCH_SUSPEND_POSSIBLE=y +CONFIG_ARCH_WANT_GENERAL_HUGETLB=y +CONFIG_ZONE_DMA32=y +CONFIG_AUDIT_ARCH=y +CONFIG_HAVE_INTEL_TXT=y +CONFIG_X86_64_SMP=y +CONFIG_ARCH_SUPPORTS_UPROBES=y +CONFIG_FIX_EARLYCON_MEM=y +CONFIG_DYNAMIC_PHYSICAL_MASK=y +CONFIG_PGTABLE_LEVELS=4 +CONFIG_CC_HAS_SANE_STACKPROTECTOR=y # # Processor type and features @@ -377,33 +336,42 @@ CONFIG_FREEZER=y CONFIG_ZONE_DMA=y CONFIG_SMP=y CONFIG_X86_FEATURE_NAMES=y -CONFIG_X86_FAST_FEATURE_TESTS=y CONFIG_X86_X2APIC=y CONFIG_X86_MPPARSE=y +# CONFIG_GOLDFISH is not set CONFIG_RETPOLINE=y +CONFIG_X86_CPU_RESCTRL=y # CONFIG_X86_EXTENDED_PLATFORM is not set CONFIG_X86_INTEL_LPSS=y CONFIG_X86_AMD_PLATFORM_DEVICE=y -CONFIG_IOSF_MBI=m +CONFIG_IOSF_MBI=y # CONFIG_IOSF_MBI_DEBUG is not set CONFIG_X86_SUPPORTS_MEMORY_FAILURE=y CONFIG_SCHED_OMIT_FRAME_POINTER=y CONFIG_HYPERVISOR_GUEST=y CONFIG_PARAVIRT=y +CONFIG_PARAVIRT_XXL=y # CONFIG_PARAVIRT_DEBUG is not set CONFIG_PARAVIRT_SPINLOCKS=y +CONFIG_X86_HV_CALLBACK_VECTOR=y CONFIG_XEN=y +CONFIG_XEN_PV=y +CONFIG_XEN_512GB=y +CONFIG_XEN_PV_SMP=y CONFIG_XEN_DOM0=y CONFIG_XEN_PVHVM=y -CONFIG_XEN_512GB=y +CONFIG_XEN_PVHVM_SMP=y +CONFIG_XEN_PVHVM_GUEST=y CONFIG_XEN_SAVE_RESTORE=y # CONFIG_XEN_DEBUG_FS is not set CONFIG_XEN_PVH=y CONFIG_KVM_GUEST=y -# CONFIG_KVM_DEBUG_FS is not set -# CONFIG_PARAVIRT_TIME_ACCOUNTING is not set +CONFIG_ARCH_CPUIDLE_HALTPOLL=y +CONFIG_PVH=y +CONFIG_PARAVIRT_TIME_ACCOUNTING=y CONFIG_PARAVIRT_CLOCK=y -CONFIG_NO_BOOTMEM=y +# CONFIG_JAILHOUSE_GUEST is not set +CONFIG_ACRN_GUEST=y # CONFIG_MK8 is not set # CONFIG_MPSC is not set # CONFIG_MCORE2 is not set @@ -416,37 +384,49 @@ CONFIG_X86_CMPXCHG64=y CONFIG_X86_CMOV=y CONFIG_X86_MINIMUM_CPU_FAMILY=64 CONFIG_X86_DEBUGCTLMSR=y +CONFIG_IA32_FEAT_CTL=y +CONFIG_X86_VMX_FEATURE_NAMES=y # CONFIG_PROCESSOR_SELECT is not set CONFIG_CPU_SUP_INTEL=y CONFIG_CPU_SUP_AMD=y +CONFIG_CPU_SUP_HYGON=y CONFIG_CPU_SUP_CENTAUR=y +CONFIG_CPU_SUP_ZHAOXIN=y CONFIG_HPET_TIMER=y CONFIG_HPET_EMULATE_RTC=y CONFIG_DMI=y CONFIG_GART_IOMMU=y -# CONFIG_CALGARY_IOMMU is not set -CONFIG_SWIOTLB=y -CONFIG_IOMMU_HELPER=y # CONFIG_MAXSMP is not set +CONFIG_NR_CPUS_RANGE_BEGIN=2 +CONFIG_NR_CPUS_RANGE_END=512 +CONFIG_NR_CPUS_DEFAULT=64 CONFIG_NR_CPUS=256 CONFIG_SCHED_SMT=y CONFIG_SCHED_MC=y -# CONFIG_PREEMPT_NONE is not set -CONFIG_PREEMPT_VOLUNTARY=y -# CONFIG_PREEMPT is not set +CONFIG_SCHED_MC_PRIO=y CONFIG_X86_LOCAL_APIC=y CONFIG_X86_IO_APIC=y CONFIG_X86_REROUTE_FOR_BROKEN_BOOT_IRQS=y CONFIG_X86_MCE=y +CONFIG_X86_MCELOG_LEGACY=y CONFIG_X86_MCE_INTEL=y CONFIG_X86_MCE_AMD=y CONFIG_X86_MCE_THRESHOLD=y CONFIG_X86_MCE_INJECT=m -CONFIG_X86_THERMAL_VECTOR=y -# CONFIG_VM86 is not set + +# +# Performance monitoring +# +CONFIG_PERF_EVENTS_INTEL_UNCORE=y +CONFIG_PERF_EVENTS_INTEL_RAPL=m +CONFIG_PERF_EVENTS_INTEL_CSTATE=m +CONFIG_PERF_EVENTS_AMD_POWER=m +# end of Performance monitoring + CONFIG_X86_16BIT=y CONFIG_X86_ESPFIX64=y CONFIG_X86_VSYSCALL_EMULATION=y +CONFIG_X86_IOPL_IOPERM=y CONFIG_I8K=m CONFIG_MICROCODE=y CONFIG_MICROCODE_INTEL=y @@ -454,67 +434,26 @@ CONFIG_MICROCODE_AMD=y CONFIG_MICROCODE_OLD_INTERFACE=y CONFIG_X86_MSR=y CONFIG_X86_CPUID=y -CONFIG_ARCH_PHYS_ADDR_T_64BIT=y -CONFIG_ARCH_DMA_ADDR_T_64BIT=y +# CONFIG_X86_5LEVEL is not set CONFIG_X86_DIRECT_GBPAGES=y -# CONFIG_NUMA is not set +CONFIG_X86_CPA_STATISTICS=y +CONFIG_AMD_MEM_ENCRYPT=y +# CONFIG_AMD_MEM_ENCRYPT_ACTIVE_BY_DEFAULT is not set +CONFIG_NUMA=y +CONFIG_AMD_NUMA=y +CONFIG_X86_64_ACPI_NUMA=y +# CONFIG_NUMA_EMU is not set +CONFIG_NODES_SHIFT=6 CONFIG_ARCH_SPARSEMEM_ENABLE=y CONFIG_ARCH_SPARSEMEM_DEFAULT=y CONFIG_ARCH_SELECT_MEMORY_MODEL=y CONFIG_ARCH_MEMORY_PROBE=y CONFIG_ARCH_PROC_KCORE_TEXT=y CONFIG_ILLEGAL_POINTER_VALUE=0xdead000000000000 -CONFIG_SELECT_MEMORY_MODEL=y -CONFIG_SPARSEMEM_MANUAL=y -CONFIG_SPARSEMEM=y -CONFIG_HAVE_MEMORY_PRESENT=y -CONFIG_SPARSEMEM_EXTREME=y -CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y -CONFIG_SPARSEMEM_ALLOC_MEM_MAP_TOGETHER=y -CONFIG_SPARSEMEM_VMEMMAP=y -CONFIG_HAVE_MEMBLOCK=y -CONFIG_HAVE_MEMBLOCK_NODE_MAP=y -CONFIG_ARCH_DISCARD_MEMBLOCK=y -CONFIG_MEMORY_ISOLATION=y -CONFIG_HAVE_BOOTMEM_INFO_NODE=y -CONFIG_MEMORY_HOTPLUG=y -CONFIG_MEMORY_HOTPLUG_SPARSE=y -CONFIG_MEMORY_HOTREMOVE=y -CONFIG_SPLIT_PTLOCK_CPUS=4 -CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y -CONFIG_MEMORY_BALLOON=y -CONFIG_BALLOON_COMPACTION=y -CONFIG_COMPACTION=y -CONFIG_MIGRATION=y -CONFIG_PHYS_ADDR_T_64BIT=y -CONFIG_ZONE_DMA_FLAG=1 -CONFIG_BOUNCE=y -CONFIG_VIRT_TO_BUS=y -CONFIG_MMU_NOTIFIER=y -# CONFIG_KSM is not set -CONFIG_DEFAULT_MMAP_MIN_ADDR=98304 -CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y -# CONFIG_MEMORY_FAILURE is not set -CONFIG_TRANSPARENT_HUGEPAGE=y -CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS=y -# CONFIG_TRANSPARENT_HUGEPAGE_MADVISE is not set -# CONFIG_CLEANCACHE is not set -# CONFIG_FRONTSWAP is not set -# CONFIG_CMA is not set -# CONFIG_MEM_SOFT_DIRTY is not set -CONFIG_ZPOOL=m -# CONFIG_ZBUD is not set -CONFIG_ZSMALLOC=m -# CONFIG_PGTABLE_MAPPING is not set -# CONFIG_ZSMALLOC_STAT is not set -CONFIG_GENERIC_EARLY_IOREMAP=y -CONFIG_ARCH_SUPPORTS_DEFERRED_STRUCT_PAGE_INIT=y -# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set -# CONFIG_IDLE_PAGE_TRACKING is not set -CONFIG_FRAME_VECTOR=y CONFIG_X86_PMEM_LEGACY_DEVICE=y CONFIG_X86_PMEM_LEGACY=y -# CONFIG_X86_CHECK_BIOS_CORRUPTION is not set +CONFIG_X86_CHECK_BIOS_CORRUPTION=y +# CONFIG_X86_BOOTPARAM_MEMORY_CORRUPTION_CHECK is not set CONFIG_X86_RESERVE_LOW=64 CONFIG_MTRR=y CONFIG_MTRR_SANITIZER=y @@ -524,43 +463,53 @@ CONFIG_X86_PAT=y CONFIG_ARCH_USES_PG_UNCACHED=y CONFIG_ARCH_RANDOM=y CONFIG_X86_SMAP=y -# CONFIG_X86_INTEL_MPX is not set +CONFIG_X86_UMIP=y +CONFIG_X86_INTEL_MEMORY_PROTECTION_KEYS=y CONFIG_X86_INTEL_TSX_MODE_OFF=y # CONFIG_X86_INTEL_TSX_MODE_ON is not set # CONFIG_X86_INTEL_TSX_MODE_AUTO is not set +CONFIG_X86_SGX=y CONFIG_EFI=y CONFIG_EFI_STUB=y CONFIG_EFI_MIXED=y -CONFIG_SECCOMP=y -# CONFIG_HZ_100 is not set +CONFIG_HZ_100=y # CONFIG_HZ_250 is not set # CONFIG_HZ_300 is not set -CONFIG_HZ_1000=y -CONFIG_HZ=1000 +# CONFIG_HZ_1000 is not set +CONFIG_HZ=100 CONFIG_SCHED_HRTICK=y -# CONFIG_KEXEC is not set +CONFIG_KEXEC=y CONFIG_KEXEC_FILE=y -# CONFIG_KEXEC_VERIFY_SIG is not set -# CONFIG_CRASH_DUMP is not set +CONFIG_ARCH_HAS_KEXEC_PURGATORY=y +CONFIG_KEXEC_SIG=y +# CONFIG_KEXEC_SIG_FORCE is not set +CONFIG_KEXEC_BZIMAGE_VERIFY_SIG=y +CONFIG_CRASH_DUMP=y +CONFIG_KEXEC_JUMP=y CONFIG_PHYSICAL_START=0x1000000 CONFIG_RELOCATABLE=y CONFIG_RANDOMIZE_BASE=y -CONFIG_RANDOMIZE_BASE_MAX_OFFSET=0x40000000 CONFIG_X86_NEED_RELOCS=y CONFIG_PHYSICAL_ALIGN=0x1000000 +CONFIG_DYNAMIC_MEMORY_LAYOUT=y +CONFIG_RANDOMIZE_MEMORY=y +CONFIG_RANDOMIZE_MEMORY_PHYSICAL_PADDING=0xa CONFIG_HOTPLUG_CPU=y # CONFIG_BOOTPARAM_HOTPLUG_CPU0 is not set # CONFIG_DEBUG_HOTPLUG_CPU0 is not set # CONFIG_COMPAT_VDSO is not set -# CONFIG_LEGACY_VSYSCALL_NATIVE is not set CONFIG_LEGACY_VSYSCALL_EMULATE=y +# CONFIG_LEGACY_VSYSCALL_XONLY is not set # CONFIG_LEGACY_VSYSCALL_NONE is not set # CONFIG_CMDLINE_BOOL is not set CONFIG_MODIFY_LDT_SYSCALL=y CONFIG_HAVE_LIVEPATCH=y CONFIG_LIVEPATCH=y -CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y -CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +# end of Processor type and features + +CONFIG_ARCH_HAS_ADD_PAGES=y +CONFIG_ARCH_MHP_MEMMAP_ON_MEMORY_ENABLE=y +CONFIG_USE_PERCPU_NUMA_NODE_ID=y # # Power management and ACPI options @@ -571,6 +520,7 @@ CONFIG_SUSPEND_FREEZER=y # CONFIG_SUSPEND_SKIP_SYNC is not set CONFIG_HIBERNATE_CALLBACKS=y CONFIG_HIBERNATION=y +CONFIG_HIBERNATION_SNAPSHOT_DEV=y CONFIG_PM_STD_PARTITION="\"\"" CONFIG_PM_SLEEP=y CONFIG_PM_SLEEP_SMP=y @@ -581,34 +531,44 @@ CONFIG_PM_WAKELOCKS_GC=y CONFIG_PM=y # CONFIG_PM_DEBUG is not set CONFIG_PM_CLK=y +CONFIG_PM_GENERIC_DOMAINS=y # CONFIG_WQ_POWER_EFFICIENT_DEFAULT is not set +CONFIG_PM_GENERIC_DOMAINS_SLEEP=y +# CONFIG_ENERGY_MODEL is not set +CONFIG_ARCH_SUPPORTS_ACPI=y CONFIG_ACPI=y CONFIG_ACPI_LEGACY_TABLES_LOOKUP=y CONFIG_ARCH_MIGHT_HAVE_ACPI_PDC=y CONFIG_ACPI_SYSTEM_POWER_STATES_SUPPORT=y # CONFIG_ACPI_DEBUGGER is not set +CONFIG_ACPI_SPCR_TABLE=y +CONFIG_ACPI_FPDT=y +CONFIG_ACPI_LPIT=y CONFIG_ACPI_SLEEP=y -CONFIG_ACPI_PROCFS_POWER=y CONFIG_ACPI_REV_OVERRIDE_POSSIBLE=y CONFIG_ACPI_EC_DEBUGFS=m CONFIG_ACPI_AC=m CONFIG_ACPI_BATTERY=m CONFIG_ACPI_BUTTON=m +# CONFIG_ACPI_TINY_POWER_BUTTON is not set CONFIG_ACPI_VIDEO=m CONFIG_ACPI_FAN=m +CONFIG_ACPI_TAD=m CONFIG_ACPI_DOCK=y CONFIG_ACPI_CPU_FREQ_PSS=y +CONFIG_ACPI_PROCESSOR_CSTATE=y CONFIG_ACPI_PROCESSOR_IDLE=y -CONFIG_ACPI_PROCESSOR=m +CONFIG_ACPI_CPPC_LIB=y +CONFIG_ACPI_PROCESSOR=y CONFIG_ACPI_IPMI=m CONFIG_ACPI_HOTPLUG_CPU=y CONFIG_ACPI_PROCESSOR_AGGREGATOR=m CONFIG_ACPI_THERMAL=m -# CONFIG_ACPI_CUSTOM_DSDT is not set -CONFIG_ACPI_INITRD_TABLE_OVERRIDE=y +CONFIG_ACPI_PLATFORM_PROFILE=m +CONFIG_ARCH_HAS_ACPI_TABLE_UPGRADE=y +CONFIG_ACPI_TABLE_UPGRADE=y # CONFIG_ACPI_DEBUG is not set CONFIG_ACPI_PCI_SLOT=y -CONFIG_X86_PM_TIMER=y CONFIG_ACPI_CONTAINER=y CONFIG_ACPI_HOTPLUG_MEMORY=y CONFIG_ACPI_HOTPLUG_IOAPIC=y @@ -618,34 +578,46 @@ CONFIG_ACPI_HED=y CONFIG_ACPI_BGRT=y # CONFIG_ACPI_REDUCED_HARDWARE_ONLY is not set CONFIG_ACPI_NFIT=m +# CONFIG_NFIT_SECURITY_DEBUG is not set +CONFIG_ACPI_NUMA=y +CONFIG_ACPI_HMAT=y CONFIG_HAVE_ACPI_APEI=y CONFIG_HAVE_ACPI_APEI_NMI=y CONFIG_ACPI_APEI=y CONFIG_ACPI_APEI_GHES=y CONFIG_ACPI_APEI_PCIEAER=y +CONFIG_ACPI_APEI_MEMORY_FAILURE=y CONFIG_ACPI_APEI_EINJ=m CONFIG_ACPI_APEI_ERST_DEBUG=m +CONFIG_ACPI_DPTF=y +CONFIG_DPTF_POWER=m +CONFIG_DPTF_PCH_FIVR=m +CONFIG_ACPI_WATCHDOG=y CONFIG_ACPI_EXTLOG=m +CONFIG_ACPI_ADXL=y +CONFIG_ACPI_CONFIGFS=m CONFIG_PMIC_OPREGION=y -CONFIG_SFI=y +CONFIG_BXT_WC_PMIC_OPREGION=y +CONFIG_CHT_DC_TI_PMIC_OPREGION=y +CONFIG_X86_PM_TIMER=y # # CPU Frequency scaling # CONFIG_CPU_FREQ=y +CONFIG_CPU_FREQ_GOV_ATTR_SET=y CONFIG_CPU_FREQ_GOV_COMMON=y -CONFIG_CPU_FREQ_STAT=m -CONFIG_CPU_FREQ_STAT_DETAILS=y +CONFIG_CPU_FREQ_STAT=y # CONFIG_CPU_FREQ_DEFAULT_GOV_PERFORMANCE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_POWERSAVE is not set # CONFIG_CPU_FREQ_DEFAULT_GOV_USERSPACE is not set -CONFIG_CPU_FREQ_DEFAULT_GOV_ONDEMAND=y -# CONFIG_CPU_FREQ_DEFAULT_GOV_CONSERVATIVE is not set +CONFIG_CPU_FREQ_DEFAULT_GOV_SCHEDUTIL=y CONFIG_CPU_FREQ_GOV_PERFORMANCE=y CONFIG_CPU_FREQ_GOV_POWERSAVE=y CONFIG_CPU_FREQ_GOV_USERSPACE=y CONFIG_CPU_FREQ_GOV_ONDEMAND=y CONFIG_CPU_FREQ_GOV_CONSERVATIVE=y +CONFIG_CPU_FREQ_GOV_SCHEDUTIL=y # # CPU frequency scaling drivers @@ -663,6 +635,7 @@ CONFIG_X86_P4_CLOCKMOD=m # shared options # CONFIG_X86_SPEEDSTEP_LIB=m +# end of CPU Frequency scaling # # CPU Idle @@ -670,100 +643,449 @@ CONFIG_X86_SPEEDSTEP_LIB=m CONFIG_CPU_IDLE=y CONFIG_CPU_IDLE_GOV_LADDER=y CONFIG_CPU_IDLE_GOV_MENU=y -# CONFIG_ARCH_NEEDS_CPU_IDLE_COUPLED is not set -CONFIG_INTEL_IDLE=y +# CONFIG_CPU_IDLE_GOV_TEO is not set +# CONFIG_CPU_IDLE_GOV_HALTPOLL is not set +CONFIG_HALTPOLL_CPUIDLE=y +# end of CPU Idle -# -# Memory power savings -# -CONFIG_I7300_IDLE_IOAT_CHANNEL=y -CONFIG_I7300_IDLE=m +CONFIG_INTEL_IDLE=y +# end of Power management and ACPI options # # Bus options (PCI etc.) # -CONFIG_PCI=y CONFIG_PCI_DIRECT=y CONFIG_PCI_MMCONFIG=y CONFIG_PCI_XEN=y -CONFIG_PCI_DOMAINS=y +CONFIG_MMCONF_FAM10H=y # CONFIG_PCI_CNB20LE_QUIRK is not set -CONFIG_PCIEPORTBUS=y -CONFIG_HOTPLUG_PCI_PCIE=y -CONFIG_PCIEAER=y -# CONFIG_PCIE_ECRC is not set -CONFIG_PCIEAER_INJECT=m -CONFIG_PCIEASPM=y -# CONFIG_PCIEASPM_DEBUG is not set -CONFIG_PCIEASPM_DEFAULT=y -# CONFIG_PCIEASPM_POWERSAVE is not set -# CONFIG_PCIEASPM_PERFORMANCE is not set -CONFIG_PCIE_PME=y -CONFIG_PCI_BUS_ADDR_T_64BIT=y -CONFIG_PCI_MSI=y -CONFIG_PCI_MSI_IRQ_DOMAIN=y -# CONFIG_PCI_DEBUG is not set -# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set -CONFIG_PCI_STUB=m -CONFIG_XEN_PCIDEV_FRONTEND=y -CONFIG_HT_IRQ=y -CONFIG_PCI_ATS=y -CONFIG_PCI_IOV=y -CONFIG_PCI_PRI=y -CONFIG_PCI_PASID=y -CONFIG_PCI_LABEL=y +# CONFIG_ISA_BUS is not set +CONFIG_ISA_DMA_API=y +CONFIG_AMD_NB=y +# CONFIG_X86_SYSFB is not set +# end of Bus options (PCI etc.) # -# PCI host controller drivers +# Binary Emulations # -CONFIG_ISA_DMA_API=y -CONFIG_AMD_NB=y -CONFIG_PCCARD=m -CONFIG_PCMCIA=m -CONFIG_PCMCIA_LOAD_CIS=y -CONFIG_CARDBUS=y +CONFIG_IA32_EMULATION=y +CONFIG_X86_X32=y +CONFIG_COMPAT_32=y +CONFIG_COMPAT=y +CONFIG_COMPAT_FOR_U64_ALIGNMENT=y +CONFIG_SYSVIPC_COMPAT=y +# end of Binary Emulations # -# PC-card bridges +# Firmware Drivers # -CONFIG_YENTA=m -CONFIG_YENTA_O2=y -CONFIG_YENTA_RICOH=y -CONFIG_YENTA_TI=y -CONFIG_YENTA_ENE_TUNE=y -CONFIG_YENTA_TOSHIBA=y -CONFIG_PD6729=m -CONFIG_I82092=m -CONFIG_PCCARD_NONSTATIC=y -CONFIG_HOTPLUG_PCI=y -CONFIG_HOTPLUG_PCI_ACPI=y -CONFIG_HOTPLUG_PCI_ACPI_IBM=m -# CONFIG_HOTPLUG_PCI_CPCI is not set -CONFIG_HOTPLUG_PCI_SHPC=m -# CONFIG_RAPIDIO is not set -# CONFIG_X86_SYSFB is not set +CONFIG_EDD=m +CONFIG_EDD_OFF=y +CONFIG_FIRMWARE_MEMMAP=y +CONFIG_DMIID=y +CONFIG_DMI_SYSFS=m +CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y +CONFIG_ISCSI_IBFT_FIND=y +CONFIG_ISCSI_IBFT=m +CONFIG_FW_CFG_SYSFS=m +CONFIG_FW_CFG_SYSFS_CMDLINE=y +# CONFIG_GOOGLE_FIRMWARE is not set + +# +# EFI (Extensible Firmware Interface) Support +# +CONFIG_EFI_VARS=y +CONFIG_EFI_ESRT=y +CONFIG_EFI_VARS_PSTORE=y +CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y +CONFIG_EFI_RUNTIME_MAP=y +# CONFIG_EFI_FAKE_MEMMAP is not set +CONFIG_EFI_SOFT_RESERVE=y +CONFIG_EFI_RUNTIME_WRAPPERS=y +CONFIG_EFI_GENERIC_STUB_INITRD_CMDLINE_LOADER=y +CONFIG_EFI_BOOTLOADER_CONTROL=m +CONFIG_EFI_CAPSULE_LOADER=m +# CONFIG_EFI_TEST is not set +CONFIG_APPLE_PROPERTIES=y +CONFIG_RESET_ATTACK_MITIGATION=y +# CONFIG_EFI_RCI2_TABLE is not set +# CONFIG_EFI_DISABLE_PCI_DMA is not set +# end of EFI (Extensible Firmware Interface) Support + +CONFIG_UEFI_CPER=y +CONFIG_UEFI_CPER_X86=y +CONFIG_EFI_DEV_PATH_PARSER=y +CONFIG_EFI_EARLYCON=y +CONFIG_EFI_CUSTOM_SSDT_OVERLAYS=y + +# +# Tegra firmware driver +# +# end of Tegra firmware driver +# end of Firmware Drivers + +CONFIG_HAVE_KVM=y +CONFIG_HAVE_KVM_IRQCHIP=y +CONFIG_HAVE_KVM_IRQFD=y +CONFIG_HAVE_KVM_IRQ_ROUTING=y +CONFIG_HAVE_KVM_EVENTFD=y +CONFIG_KVM_MMIO=y +CONFIG_KVM_ASYNC_PF=y +CONFIG_HAVE_KVM_MSI=y +CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y +CONFIG_KVM_VFIO=y +CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y +CONFIG_KVM_COMPAT=y +CONFIG_HAVE_KVM_IRQ_BYPASS=y +CONFIG_HAVE_KVM_NO_POLL=y +CONFIG_KVM_XFER_TO_GUEST_WORK=y +CONFIG_VIRTUALIZATION=y +CONFIG_KVM=m +# CONFIG_KVM_WERROR is not set +CONFIG_KVM_INTEL=m +CONFIG_X86_SGX_KVM=y +CONFIG_KVM_AMD=m +CONFIG_KVM_AMD_SEV=y +CONFIG_KVM_XEN=y +CONFIG_KVM_MMU_AUDIT=y +CONFIG_AS_AVX512=y +CONFIG_AS_SHA1_NI=y +CONFIG_AS_SHA256_NI=y +CONFIG_AS_TPAUSE=y # -# Executable file formats / Emulations +# General architecture-dependent options +# +CONFIG_CRASH_CORE=y +CONFIG_KEXEC_CORE=y +CONFIG_HOTPLUG_SMT=y +CONFIG_GENERIC_ENTRY=y +# CONFIG_KPROBES is not set +CONFIG_JUMP_LABEL=y +# CONFIG_STATIC_KEYS_SELFTEST is not set +# CONFIG_STATIC_CALL_SELFTEST is not set +CONFIG_UPROBES=y +CONFIG_HAVE_EFFICIENT_UNALIGNED_ACCESS=y +CONFIG_ARCH_USE_BUILTIN_BSWAP=y +CONFIG_USER_RETURN_NOTIFIER=y +CONFIG_HAVE_IOREMAP_PROT=y +CONFIG_HAVE_KPROBES=y +CONFIG_HAVE_KRETPROBES=y +CONFIG_HAVE_OPTPROBES=y +CONFIG_HAVE_KPROBES_ON_FTRACE=y +CONFIG_HAVE_FUNCTION_ERROR_INJECTION=y +CONFIG_HAVE_NMI=y +CONFIG_HAVE_ARCH_TRACEHOOK=y +CONFIG_HAVE_DMA_CONTIGUOUS=y +CONFIG_GENERIC_SMP_IDLE_THREAD=y +CONFIG_ARCH_HAS_FORTIFY_SOURCE=y +CONFIG_ARCH_HAS_SET_MEMORY=y +CONFIG_ARCH_HAS_SET_DIRECT_MAP=y +CONFIG_HAVE_ARCH_THREAD_STRUCT_WHITELIST=y +CONFIG_ARCH_WANTS_DYNAMIC_TASK_STRUCT=y +CONFIG_HAVE_ASM_MODVERSIONS=y +CONFIG_HAVE_REGS_AND_STACK_ACCESS_API=y +CONFIG_HAVE_RSEQ=y +CONFIG_HAVE_FUNCTION_ARG_ACCESS_API=y +CONFIG_HAVE_HW_BREAKPOINT=y +CONFIG_HAVE_MIXED_BREAKPOINTS_REGS=y +CONFIG_HAVE_USER_RETURN_NOTIFIER=y +CONFIG_HAVE_PERF_EVENTS_NMI=y +CONFIG_HAVE_HARDLOCKUP_DETECTOR_PERF=y +CONFIG_HAVE_PERF_REGS=y +CONFIG_HAVE_PERF_USER_STACK_DUMP=y +CONFIG_HAVE_ARCH_JUMP_LABEL=y +CONFIG_HAVE_ARCH_JUMP_LABEL_RELATIVE=y +CONFIG_MMU_GATHER_TABLE_FREE=y +CONFIG_MMU_GATHER_RCU_TABLE_FREE=y +CONFIG_ARCH_HAVE_NMI_SAFE_CMPXCHG=y +CONFIG_HAVE_ALIGNED_STRUCT_PAGE=y +CONFIG_HAVE_CMPXCHG_LOCAL=y +CONFIG_HAVE_CMPXCHG_DOUBLE=y +CONFIG_ARCH_WANT_COMPAT_IPC_PARSE_VERSION=y +CONFIG_ARCH_WANT_OLD_COMPAT_IPC=y +CONFIG_HAVE_ARCH_SECCOMP=y +CONFIG_HAVE_ARCH_SECCOMP_FILTER=y +CONFIG_SECCOMP=y +CONFIG_SECCOMP_FILTER=y +# CONFIG_SECCOMP_CACHE_DEBUG is not set +CONFIG_HAVE_ARCH_STACKLEAK=y +CONFIG_HAVE_STACKPROTECTOR=y +CONFIG_STACKPROTECTOR=y +CONFIG_STACKPROTECTOR_STRONG=y +CONFIG_ARCH_SUPPORTS_LTO_CLANG=y +CONFIG_ARCH_SUPPORTS_LTO_CLANG_THIN=y +CONFIG_LTO_NONE=y +CONFIG_HAVE_ARCH_WITHIN_STACK_FRAMES=y +CONFIG_HAVE_CONTEXT_TRACKING=y +CONFIG_HAVE_CONTEXT_TRACKING_OFFSTACK=y +CONFIG_HAVE_VIRT_CPU_ACCOUNTING_GEN=y +CONFIG_HAVE_IRQ_TIME_ACCOUNTING=y +CONFIG_HAVE_MOVE_PUD=y +CONFIG_HAVE_MOVE_PMD=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE=y +CONFIG_HAVE_ARCH_TRANSPARENT_HUGEPAGE_PUD=y +CONFIG_HAVE_ARCH_HUGE_VMAP=y +CONFIG_ARCH_WANT_HUGE_PMD_SHARE=y +CONFIG_HAVE_ARCH_SOFT_DIRTY=y +CONFIG_HAVE_MOD_ARCH_SPECIFIC=y +CONFIG_MODULES_USE_ELF_RELA=y +CONFIG_HAVE_IRQ_EXIT_ON_IRQ_STACK=y +CONFIG_HAVE_SOFTIRQ_ON_OWN_STACK=y +CONFIG_ARCH_HAS_ELF_RANDOMIZE=y +CONFIG_HAVE_ARCH_MMAP_RND_BITS=y +CONFIG_HAVE_EXIT_THREAD=y +CONFIG_ARCH_MMAP_RND_BITS=28 +CONFIG_HAVE_ARCH_MMAP_RND_COMPAT_BITS=y +CONFIG_ARCH_MMAP_RND_COMPAT_BITS=8 +CONFIG_HAVE_ARCH_COMPAT_MMAP_BASES=y +CONFIG_HAVE_STACK_VALIDATION=y +CONFIG_HAVE_RELIABLE_STACKTRACE=y +CONFIG_ISA_BUS_API=y +CONFIG_OLD_SIGSUSPEND3=y +CONFIG_COMPAT_OLD_SIGACTION=y +CONFIG_COMPAT_32BIT_TIME=y +CONFIG_HAVE_ARCH_VMAP_STACK=y +CONFIG_VMAP_STACK=y +CONFIG_HAVE_ARCH_RANDOMIZE_KSTACK_OFFSET=y +# CONFIG_RANDOMIZE_KSTACK_OFFSET_DEFAULT is not set +CONFIG_ARCH_HAS_STRICT_KERNEL_RWX=y +CONFIG_STRICT_KERNEL_RWX=y +CONFIG_ARCH_HAS_STRICT_MODULE_RWX=y +CONFIG_STRICT_MODULE_RWX=y +CONFIG_HAVE_ARCH_PREL32_RELOCATIONS=y +CONFIG_ARCH_USE_MEMREMAP_PROT=y +# CONFIG_LOCK_EVENT_COUNTS is not set +CONFIG_ARCH_HAS_MEM_ENCRYPT=y +CONFIG_HAVE_STATIC_CALL=y +CONFIG_HAVE_STATIC_CALL_INLINE=y +CONFIG_HAVE_PREEMPT_DYNAMIC=y +CONFIG_ARCH_WANT_LD_ORPHAN_WARN=y +CONFIG_ARCH_SUPPORTS_DEBUG_PAGEALLOC=y +CONFIG_ARCH_HAS_ELFCORE_COMPAT=y + +# +# GCOV-based kernel profiling +# +# CONFIG_GCOV_KERNEL is not set +CONFIG_ARCH_HAS_GCOV_PROFILE_ALL=y +# end of GCOV-based kernel profiling + +CONFIG_HAVE_GCC_PLUGINS=y +CONFIG_GCC_PLUGINS=y +# CONFIG_GCC_PLUGIN_CYC_COMPLEXITY is not set +# CONFIG_GCC_PLUGIN_LATENT_ENTROPY is not set +# CONFIG_GCC_PLUGIN_RANDSTRUCT is not set +# end of General architecture-dependent options + +CONFIG_RT_MUTEXES=y +CONFIG_BASE_SMALL=0 +CONFIG_MODULES=y +CONFIG_MODULE_FORCE_LOAD=y +CONFIG_MODULE_UNLOAD=y +CONFIG_MODULE_FORCE_UNLOAD=y +# CONFIG_MODVERSIONS is not set +# CONFIG_MODULE_SRCVERSION_ALL is not set +# CONFIG_MODULE_SIG is not set +CONFIG_MODULE_COMPRESS_NONE=y +# CONFIG_MODULE_COMPRESS_GZIP is not set +# CONFIG_MODULE_COMPRESS_XZ is not set +# CONFIG_MODULE_COMPRESS_ZSTD is not set +CONFIG_MODULE_ALLOW_MISSING_NAMESPACE_IMPORTS=y +CONFIG_MODPROBE_PATH="/sbin/modprobe" +# CONFIG_TRIM_UNUSED_KSYMS is not set +CONFIG_MODULES_TREE_LOOKUP=y +CONFIG_BLOCK=y +CONFIG_BLK_RQ_ALLOC_TIME=y +CONFIG_BLK_SCSI_REQUEST=y +CONFIG_BLK_CGROUP_RWSTAT=y +CONFIG_BLK_DEV_BSG=y +CONFIG_BLK_DEV_BSGLIB=y +CONFIG_BLK_DEV_INTEGRITY=y +CONFIG_BLK_DEV_INTEGRITY_T10=y +CONFIG_BLK_DEV_ZONED=y +CONFIG_BLK_DEV_THROTTLING=y +# CONFIG_BLK_DEV_THROTTLING_LOW is not set +# CONFIG_BLK_CMDLINE_PARSER is not set +CONFIG_BLK_WBT=y +CONFIG_BLK_CGROUP_IOLATENCY=y +CONFIG_BLK_CGROUP_IOCOST=y +CONFIG_BLK_WBT_MQ=y +CONFIG_BLK_DEBUG_FS=y +CONFIG_BLK_DEBUG_FS_ZONED=y +CONFIG_BLK_SED_OPAL=y +CONFIG_BLK_INLINE_ENCRYPTION=y +CONFIG_BLK_INLINE_ENCRYPTION_FALLBACK=y + +# +# Partition Types +# +CONFIG_PARTITION_ADVANCED=y +# CONFIG_ACORN_PARTITION is not set +CONFIG_AIX_PARTITION=y +CONFIG_OSF_PARTITION=y +CONFIG_AMIGA_PARTITION=y +# CONFIG_ATARI_PARTITION is not set +CONFIG_MAC_PARTITION=y +CONFIG_MSDOS_PARTITION=y +CONFIG_BSD_DISKLABEL=y +CONFIG_MINIX_SUBPARTITION=y +CONFIG_SOLARIS_X86_PARTITION=y +CONFIG_UNIXWARE_DISKLABEL=y +# CONFIG_LDM_PARTITION is not set +CONFIG_SGI_PARTITION=y +# CONFIG_ULTRIX_PARTITION is not set +CONFIG_SUN_PARTITION=y +CONFIG_KARMA_PARTITION=y +CONFIG_EFI_PARTITION=y +# CONFIG_SYSV68_PARTITION is not set +# CONFIG_CMDLINE_PARTITION is not set +# end of Partition Types + +CONFIG_BLOCK_COMPAT=y +CONFIG_BLK_MQ_PCI=y +CONFIG_BLK_MQ_VIRTIO=y +CONFIG_BLK_MQ_RDMA=y +CONFIG_BLK_PM=y + +# +# IO Schedulers +# +CONFIG_MQ_IOSCHED_DEADLINE=y +CONFIG_MQ_IOSCHED_KYBER=m +CONFIG_IOSCHED_BFQ=m +CONFIG_BFQ_GROUP_IOSCHED=y +# CONFIG_BFQ_CGROUP_DEBUG is not set +# end of IO Schedulers + +CONFIG_PREEMPT_NOTIFIERS=y +CONFIG_PADATA=y +CONFIG_ASN1=y +CONFIG_INLINE_SPIN_UNLOCK_IRQ=y +CONFIG_INLINE_READ_UNLOCK=y +CONFIG_INLINE_READ_UNLOCK_IRQ=y +CONFIG_INLINE_WRITE_UNLOCK=y +CONFIG_INLINE_WRITE_UNLOCK_IRQ=y +CONFIG_ARCH_SUPPORTS_ATOMIC_RMW=y +CONFIG_MUTEX_SPIN_ON_OWNER=y +CONFIG_RWSEM_SPIN_ON_OWNER=y +CONFIG_LOCK_SPIN_ON_OWNER=y +CONFIG_ARCH_USE_QUEUED_SPINLOCKS=y +CONFIG_QUEUED_SPINLOCKS=y +CONFIG_ARCH_USE_QUEUED_RWLOCKS=y +CONFIG_QUEUED_RWLOCKS=y +CONFIG_ARCH_HAS_NON_OVERLAPPING_ADDRESS_SPACE=y +CONFIG_ARCH_HAS_SYNC_CORE_BEFORE_USERMODE=y +CONFIG_ARCH_HAS_SYSCALL_WRAPPER=y +CONFIG_FREEZER=y + +# +# Executable file formats # CONFIG_BINFMT_ELF=y CONFIG_COMPAT_BINFMT_ELF=y +CONFIG_ELFCORE=y # CONFIG_CORE_DUMP_DEFAULT_ELF_HEADERS is not set CONFIG_BINFMT_SCRIPT=y -# CONFIG_HAVE_AOUT is not set CONFIG_BINFMT_MISC=m CONFIG_COREDUMP=y -CONFIG_IA32_EMULATION=y -# CONFIG_IA32_AOUT is not set -CONFIG_X86_X32=y -CONFIG_COMPAT=y -CONFIG_COMPAT_FOR_U64_ALIGNMENT=y -CONFIG_SYSVIPC_COMPAT=y -CONFIG_X86_DEV_DMA_OPS=y -CONFIG_PMC_ATOM=y +# end of Executable file formats + +# +# Memory Management options +# +CONFIG_SELECT_MEMORY_MODEL=y +CONFIG_SPARSEMEM_MANUAL=y +CONFIG_SPARSEMEM=y +CONFIG_NEED_MULTIPLE_NODES=y +CONFIG_SPARSEMEM_EXTREME=y +CONFIG_SPARSEMEM_VMEMMAP_ENABLE=y +CONFIG_SPARSEMEM_VMEMMAP=y +CONFIG_HAVE_FAST_GUP=y +CONFIG_NUMA_KEEP_MEMINFO=y +CONFIG_MEMORY_ISOLATION=y +CONFIG_HAVE_BOOTMEM_INFO_NODE=y +CONFIG_ARCH_ENABLE_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTPLUG=y +CONFIG_MEMORY_HOTPLUG_SPARSE=y +CONFIG_MEMORY_HOTPLUG_DEFAULT_ONLINE=y +CONFIG_ARCH_ENABLE_MEMORY_HOTREMOVE=y +CONFIG_MEMORY_HOTREMOVE=y +CONFIG_MHP_MEMMAP_ON_MEMORY=y +CONFIG_SPLIT_PTLOCK_CPUS=4 +CONFIG_ARCH_ENABLE_SPLIT_PMD_PTLOCK=y +CONFIG_MEMORY_BALLOON=y +CONFIG_BALLOON_COMPACTION=y +CONFIG_COMPACTION=y +CONFIG_PAGE_REPORTING=y +CONFIG_MIGRATION=y +CONFIG_ARCH_ENABLE_HUGEPAGE_MIGRATION=y +CONFIG_ARCH_ENABLE_THP_MIGRATION=y +CONFIG_CONTIG_ALLOC=y +CONFIG_PHYS_ADDR_T_64BIT=y +CONFIG_VIRT_TO_BUS=y +CONFIG_MMU_NOTIFIER=y +CONFIG_KSM=y +CONFIG_DEFAULT_MMAP_MIN_ADDR=98304 +CONFIG_ARCH_SUPPORTS_MEMORY_FAILURE=y +CONFIG_MEMORY_FAILURE=y +CONFIG_HWPOISON_INJECT=m +CONFIG_TRANSPARENT_HUGEPAGE=y +# CONFIG_TRANSPARENT_HUGEPAGE_ALWAYS is not set +CONFIG_TRANSPARENT_HUGEPAGE_MADVISE=y +CONFIG_ARCH_WANTS_THP_SWAP=y +CONFIG_THP_SWAP=y +CONFIG_CLEANCACHE=y +CONFIG_FRONTSWAP=y +CONFIG_CMA=y +# CONFIG_CMA_DEBUG is not set +# CONFIG_CMA_DEBUGFS is not set +CONFIG_CMA_SYSFS=y +CONFIG_CMA_AREAS=7 +# CONFIG_MEM_SOFT_DIRTY is not set +CONFIG_ZSWAP=y +# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_DEFLATE is not set +CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZO=y +# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_842 is not set +# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4 is not set +# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_LZ4HC is not set +# CONFIG_ZSWAP_COMPRESSOR_DEFAULT_ZSTD is not set +CONFIG_ZSWAP_COMPRESSOR_DEFAULT="lzo" +CONFIG_ZSWAP_ZPOOL_DEFAULT_ZBUD=y +# CONFIG_ZSWAP_ZPOOL_DEFAULT_Z3FOLD is not set +# CONFIG_ZSWAP_ZPOOL_DEFAULT_ZSMALLOC is not set +CONFIG_ZSWAP_ZPOOL_DEFAULT="zbud" +# CONFIG_ZSWAP_DEFAULT_ON is not set +CONFIG_ZPOOL=y +CONFIG_ZBUD=y +CONFIG_Z3FOLD=y +CONFIG_ZSMALLOC=y +# CONFIG_ZSMALLOC_STAT is not set +CONFIG_GENERIC_EARLY_IOREMAP=y +# CONFIG_DEFERRED_STRUCT_PAGE_INIT is not set +# CONFIG_IDLE_PAGE_TRACKING is not set +CONFIG_ARCH_HAS_CACHE_LINE_SIZE=y +CONFIG_ARCH_HAS_PTE_DEVMAP=y +CONFIG_ZONE_DEVICE=y +CONFIG_DEV_PAGEMAP_OPS=y +CONFIG_HMM_MIRROR=y +CONFIG_DEVICE_PRIVATE=y +CONFIG_VMAP_PFN=y +CONFIG_ARCH_USES_HIGH_VMA_FLAGS=y +CONFIG_ARCH_HAS_PKEYS=y +# CONFIG_PERCPU_STATS is not set +# CONFIG_GUP_TEST is not set +# CONFIG_READ_ONLY_THP_FOR_FS is not set +CONFIG_ARCH_HAS_PTE_SPECIAL=y +CONFIG_MAPPING_DIRTY_HELPERS=y +# end of Memory Management options + CONFIG_NET=y CONFIG_COMPAT_NETLINK_MESSAGES=y CONFIG_NET_INGRESS=y +CONFIG_NET_EGRESS=y +CONFIG_NET_REDIRECT=y +CONFIG_SKB_EXTENSIONS=y # # Networking options @@ -771,20 +1093,33 @@ CONFIG_NET_INGRESS=y CONFIG_PACKET=y CONFIG_PACKET_DIAG=m CONFIG_UNIX=y +CONFIG_UNIX_SCM=y CONFIG_UNIX_DIAG=m +CONFIG_TLS=m +# CONFIG_TLS_DEVICE is not set +# CONFIG_TLS_TOE is not set CONFIG_XFRM=y +CONFIG_XFRM_OFFLOAD=y CONFIG_XFRM_ALGO=y CONFIG_XFRM_USER=y +# CONFIG_XFRM_USER_COMPAT is not set +# CONFIG_XFRM_INTERFACE is not set # CONFIG_XFRM_SUB_POLICY is not set -# CONFIG_XFRM_MIGRATE is not set +CONFIG_XFRM_MIGRATE=y # CONFIG_XFRM_STATISTICS is not set +CONFIG_XFRM_AH=m +CONFIG_XFRM_ESP=m CONFIG_XFRM_IPCOMP=m CONFIG_NET_KEY=m -# CONFIG_NET_KEY_MIGRATE is not set +CONFIG_NET_KEY_MIGRATE=y +CONFIG_XFRM_ESPINTCP=y +# CONFIG_SMC is not set +CONFIG_XDP_SOCKETS=y +CONFIG_XDP_SOCKETS_DIAG=m CONFIG_INET=y CONFIG_IP_MULTICAST=y CONFIG_IP_ADVANCED_ROUTER=y -# CONFIG_IP_FIB_TRIE_STATS is not set +CONFIG_IP_FIB_TRIE_STATS=y CONFIG_IP_MULTIPLE_TABLES=y CONFIG_IP_ROUTE_MULTIPATH=y CONFIG_IP_ROUTE_VERBOSE=y @@ -795,6 +1130,7 @@ CONFIG_NET_IPGRE_DEMUX=m CONFIG_NET_IP_TUNNEL=m CONFIG_NET_IPGRE=m CONFIG_NET_IPGRE_BROADCAST=y +CONFIG_IP_MROUTE_COMMON=y CONFIG_IP_MROUTE=y CONFIG_IP_MROUTE_MULTIPLE_TABLES=y CONFIG_IP_PIMSM_V1=y @@ -806,48 +1142,70 @@ CONFIG_NET_FOU=m CONFIG_NET_FOU_IP_TUNNELS=y CONFIG_INET_AH=m CONFIG_INET_ESP=m +CONFIG_INET_ESP_OFFLOAD=m +CONFIG_INET_ESPINTCP=y CONFIG_INET_IPCOMP=m CONFIG_INET_XFRM_TUNNEL=m CONFIG_INET_TUNNEL=m -CONFIG_INET_XFRM_MODE_TRANSPORT=m -CONFIG_INET_XFRM_MODE_TUNNEL=m -CONFIG_INET_XFRM_MODE_BEET=m -CONFIG_INET_LRO=y CONFIG_INET_DIAG=m CONFIG_INET_TCP_DIAG=m CONFIG_INET_UDP_DIAG=m -# CONFIG_TCP_CONG_ADVANCED is not set +CONFIG_INET_RAW_DIAG=m +CONFIG_INET_DIAG_DESTROY=y +CONFIG_TCP_CONG_ADVANCED=y +CONFIG_TCP_CONG_BIC=m CONFIG_TCP_CONG_CUBIC=y +CONFIG_TCP_CONG_WESTWOOD=m +CONFIG_TCP_CONG_HTCP=m +CONFIG_TCP_CONG_HSTCP=m +CONFIG_TCP_CONG_HYBLA=m +CONFIG_TCP_CONG_VEGAS=m +CONFIG_TCP_CONG_NV=m +CONFIG_TCP_CONG_SCALABLE=m +CONFIG_TCP_CONG_LP=m +CONFIG_TCP_CONG_VENO=m +CONFIG_TCP_CONG_YEAH=m +CONFIG_TCP_CONG_ILLINOIS=m +CONFIG_TCP_CONG_DCTCP=m +CONFIG_TCP_CONG_CDG=m +CONFIG_TCP_CONG_BBR=m +CONFIG_DEFAULT_CUBIC=y +# CONFIG_DEFAULT_RENO is not set CONFIG_DEFAULT_TCP_CONG="cubic" -# CONFIG_TCP_MD5SIG is not set +CONFIG_TCP_MD5SIG=y CONFIG_IPV6=m # CONFIG_IPV6_ROUTER_PREF is not set # CONFIG_IPV6_OPTIMISTIC_DAD is not set CONFIG_INET6_AH=m CONFIG_INET6_ESP=m +CONFIG_INET6_ESP_OFFLOAD=m +CONFIG_INET6_ESPINTCP=y CONFIG_INET6_IPCOMP=m CONFIG_IPV6_MIP6=m CONFIG_IPV6_ILA=m CONFIG_INET6_XFRM_TUNNEL=m CONFIG_INET6_TUNNEL=m -CONFIG_INET6_XFRM_MODE_TRANSPORT=m -CONFIG_INET6_XFRM_MODE_TUNNEL=m -CONFIG_INET6_XFRM_MODE_BEET=m -CONFIG_INET6_XFRM_MODE_ROUTEOPTIMIZATION=m CONFIG_IPV6_VTI=m CONFIG_IPV6_SIT=m # CONFIG_IPV6_SIT_6RD is not set CONFIG_IPV6_NDISC_NODETYPE=y CONFIG_IPV6_TUNNEL=m CONFIG_IPV6_GRE=m -# CONFIG_IPV6_MULTIPLE_TABLES is not set +CONFIG_IPV6_FOU=m +CONFIG_IPV6_FOU_TUNNEL=m +CONFIG_IPV6_MULTIPLE_TABLES=y +CONFIG_IPV6_SUBTREES=y # CONFIG_IPV6_MROUTE is not set +CONFIG_IPV6_SEG6_LWTUNNEL=y +CONFIG_IPV6_SEG6_HMAC=y +CONFIG_IPV6_RPL_LWTUNNEL=y # CONFIG_NETLABEL is not set +CONFIG_MPTCP=y +CONFIG_INET_MPTCP_DIAG=m # CONFIG_NETWORK_SECMARK is not set CONFIG_NET_PTP_CLASSIFY=y -# CONFIG_NETWORK_PHY_TIMESTAMPING is not set +CONFIG_NETWORK_PHY_TIMESTAMPING=y CONFIG_NETFILTER=y -# CONFIG_NETFILTER_DEBUG is not set CONFIG_NETFILTER_ADVANCED=y CONFIG_BRIDGE_NETFILTER=m @@ -856,22 +1214,26 @@ CONFIG_BRIDGE_NETFILTER=m # CONFIG_NETFILTER_INGRESS=y CONFIG_NETFILTER_NETLINK=m +CONFIG_NETFILTER_FAMILY_BRIDGE=y +CONFIG_NETFILTER_FAMILY_ARP=y CONFIG_NETFILTER_NETLINK_ACCT=m CONFIG_NETFILTER_NETLINK_QUEUE=m CONFIG_NETFILTER_NETLINK_LOG=m +CONFIG_NETFILTER_NETLINK_OSF=m CONFIG_NF_CONNTRACK=m -CONFIG_NF_LOG_COMMON=m +CONFIG_NF_LOG_SYSLOG=m +CONFIG_NETFILTER_CONNCOUNT=m CONFIG_NF_CONNTRACK_MARK=y CONFIG_NF_CONNTRACK_ZONES=y # CONFIG_NF_CONNTRACK_PROCFS is not set -# CONFIG_NF_CONNTRACK_EVENTS is not set -# CONFIG_NF_CONNTRACK_TIMEOUT is not set -# CONFIG_NF_CONNTRACK_TIMESTAMP is not set +CONFIG_NF_CONNTRACK_EVENTS=y +CONFIG_NF_CONNTRACK_TIMEOUT=y +CONFIG_NF_CONNTRACK_TIMESTAMP=y CONFIG_NF_CONNTRACK_LABELS=y -CONFIG_NF_CT_PROTO_DCCP=m -CONFIG_NF_CT_PROTO_GRE=m -CONFIG_NF_CT_PROTO_SCTP=m -CONFIG_NF_CT_PROTO_UDPLITE=m +CONFIG_NF_CT_PROTO_DCCP=y +CONFIG_NF_CT_PROTO_GRE=y +CONFIG_NF_CT_PROTO_SCTP=y +CONFIG_NF_CT_PROTO_UDPLITE=y CONFIG_NF_CONNTRACK_AMANDA=m CONFIG_NF_CONNTRACK_FTP=m CONFIG_NF_CONNTRACK_H323=m @@ -887,36 +1249,51 @@ CONFIG_NF_CT_NETLINK=m CONFIG_NF_CT_NETLINK_TIMEOUT=m # CONFIG_NETFILTER_NETLINK_GLUE_CT is not set CONFIG_NF_NAT=m -CONFIG_NF_NAT_NEEDED=y -CONFIG_NF_NAT_PROTO_DCCP=m -CONFIG_NF_NAT_PROTO_UDPLITE=m -CONFIG_NF_NAT_PROTO_SCTP=m CONFIG_NF_NAT_AMANDA=m CONFIG_NF_NAT_FTP=m CONFIG_NF_NAT_IRC=m CONFIG_NF_NAT_SIP=m CONFIG_NF_NAT_TFTP=m -CONFIG_NF_NAT_REDIRECT=m +CONFIG_NF_NAT_REDIRECT=y +CONFIG_NF_NAT_MASQUERADE=y CONFIG_NETFILTER_SYNPROXY=m CONFIG_NF_TABLES=m -CONFIG_NF_TABLES_INET=m -CONFIG_NF_TABLES_NETDEV=m -CONFIG_NFT_EXTHDR=m -CONFIG_NFT_META=m +CONFIG_NF_TABLES_INET=y +CONFIG_NF_TABLES_NETDEV=y +CONFIG_NFT_NUMGEN=m CONFIG_NFT_CT=m -CONFIG_NFT_RBTREE=m -CONFIG_NFT_HASH=m +CONFIG_NFT_FLOW_OFFLOAD=m CONFIG_NFT_COUNTER=m +CONFIG_NFT_CONNLIMIT=m CONFIG_NFT_LOG=m CONFIG_NFT_LIMIT=m CONFIG_NFT_MASQ=m CONFIG_NFT_REDIR=m CONFIG_NFT_NAT=m +CONFIG_NFT_TUNNEL=m +CONFIG_NFT_OBJREF=m CONFIG_NFT_QUEUE=m +CONFIG_NFT_QUOTA=m CONFIG_NFT_REJECT=m CONFIG_NFT_REJECT_INET=m CONFIG_NFT_COMPAT=m +CONFIG_NFT_HASH=m +CONFIG_NFT_FIB=m +CONFIG_NFT_FIB_INET=m +CONFIG_NFT_XFRM=m +CONFIG_NFT_SOCKET=m +CONFIG_NFT_OSF=m +CONFIG_NFT_TPROXY=m +CONFIG_NFT_SYNPROXY=m +CONFIG_NF_DUP_NETDEV=m +CONFIG_NFT_DUP_NETDEV=m +CONFIG_NFT_FWD_NETDEV=m +CONFIG_NFT_FIB_NETDEV=m +CONFIG_NFT_REJECT_NETDEV=m +CONFIG_NF_FLOW_TABLE_INET=m +CONFIG_NF_FLOW_TABLE=m CONFIG_NETFILTER_XTABLES=m +CONFIG_NETFILTER_XTABLES_COMPAT=y # # Xtables combined modules @@ -947,6 +1324,7 @@ CONFIG_NETFILTER_XT_TARGET_NFQUEUE=m CONFIG_NETFILTER_XT_TARGET_NOTRACK=m CONFIG_NETFILTER_XT_TARGET_RATEEST=m CONFIG_NETFILTER_XT_TARGET_REDIRECT=m +CONFIG_NETFILTER_XT_TARGET_MASQUERADE=m CONFIG_NETFILTER_XT_TARGET_TEE=m CONFIG_NETFILTER_XT_TARGET_TPROXY=m CONFIG_NETFILTER_XT_TARGET_TRACE=m @@ -1002,6 +1380,8 @@ CONFIG_NETFILTER_XT_MATCH_STRING=m CONFIG_NETFILTER_XT_MATCH_TCPMSS=m CONFIG_NETFILTER_XT_MATCH_TIME=m CONFIG_NETFILTER_XT_MATCH_U32=m +# end of Core Netfilter Configuration + CONFIG_IP_SET=m CONFIG_IP_SET_MAX=256 CONFIG_IP_SET_BITMAP_IP=m @@ -1012,6 +1392,7 @@ CONFIG_IP_SET_HASH_IPMARK=m CONFIG_IP_SET_HASH_IPPORT=m CONFIG_IP_SET_HASH_IPPORTIP=m CONFIG_IP_SET_HASH_IPPORTNET=m +CONFIG_IP_SET_HASH_IPMAC=m CONFIG_IP_SET_HASH_MAC=m CONFIG_IP_SET_HASH_NETPORTNET=m CONFIG_IP_SET_HASH_NET=m @@ -1047,8 +1428,10 @@ CONFIG_IP_VS_LBLC=m CONFIG_IP_VS_LBLCR=m CONFIG_IP_VS_DH=m CONFIG_IP_VS_SH=m +CONFIG_IP_VS_MH=m CONFIG_IP_VS_SED=m CONFIG_IP_VS_NQ=m +CONFIG_IP_VS_TWOS=m # # IPVS SH scheduler @@ -1056,6 +1439,11 @@ CONFIG_IP_VS_NQ=m CONFIG_IP_VS_SH_TAB_BITS=8 # +# IPVS MH scheduler +# +CONFIG_IP_VS_MH_TAB_INDEX=12 + +# # IPVS application helper # CONFIG_IP_VS_FTP=m @@ -1066,23 +1454,19 @@ CONFIG_IP_VS_PE_SIP=m # IP: Netfilter Configuration # CONFIG_NF_DEFRAG_IPV4=m -CONFIG_NF_CONNTRACK_IPV4=m -CONFIG_NF_TABLES_IPV4=m -CONFIG_NFT_CHAIN_ROUTE_IPV4=m +CONFIG_NF_SOCKET_IPV4=m +CONFIG_NF_TPROXY_IPV4=m +CONFIG_NF_TABLES_IPV4=y CONFIG_NFT_REJECT_IPV4=m CONFIG_NFT_DUP_IPV4=m -CONFIG_NF_TABLES_ARP=m +CONFIG_NFT_FIB_IPV4=m +CONFIG_NF_TABLES_ARP=y +CONFIG_NF_FLOW_TABLE_IPV4=m CONFIG_NF_DUP_IPV4=m CONFIG_NF_LOG_ARP=m CONFIG_NF_LOG_IPV4=m CONFIG_NF_REJECT_IPV4=m -CONFIG_NF_NAT_IPV4=m -CONFIG_NFT_CHAIN_NAT_IPV4=m -CONFIG_NF_NAT_MASQUERADE_IPV4=m -CONFIG_NFT_MASQ_IPV4=m -CONFIG_NFT_REDIR_IPV4=m CONFIG_NF_NAT_SNMP_BASIC=m -CONFIG_NF_NAT_PROTO_GRE=m CONFIG_NF_NAT_PPTP=m CONFIG_NF_NAT_H323=m CONFIG_IP_NF_IPTABLES=m @@ -1106,24 +1490,21 @@ CONFIG_IP_NF_SECURITY=m CONFIG_IP_NF_ARPTABLES=m CONFIG_IP_NF_ARPFILTER=m CONFIG_IP_NF_ARP_MANGLE=m +# end of IP: Netfilter Configuration # # IPv6: Netfilter Configuration # -CONFIG_NF_DEFRAG_IPV6=m -CONFIG_NF_CONNTRACK_IPV6=m -CONFIG_NF_TABLES_IPV6=m -CONFIG_NFT_CHAIN_ROUTE_IPV6=m +CONFIG_NF_SOCKET_IPV6=m +CONFIG_NF_TPROXY_IPV6=m +CONFIG_NF_TABLES_IPV6=y CONFIG_NFT_REJECT_IPV6=m CONFIG_NFT_DUP_IPV6=m +CONFIG_NFT_FIB_IPV6=m +CONFIG_NF_FLOW_TABLE_IPV6=m CONFIG_NF_DUP_IPV6=m CONFIG_NF_REJECT_IPV6=m CONFIG_NF_LOG_IPV6=m -CONFIG_NF_NAT_IPV6=m -CONFIG_NFT_CHAIN_NAT_IPV6=m -CONFIG_NF_NAT_MASQUERADE_IPV6=m -CONFIG_NFT_MASQ_IPV6=m -CONFIG_NFT_REDIR_IPV6=m CONFIG_IP6_NF_IPTABLES=m CONFIG_IP6_NF_MATCH_AH=m CONFIG_IP6_NF_MATCH_EUI64=m @@ -1134,6 +1515,7 @@ CONFIG_IP6_NF_MATCH_IPV6HEADER=m CONFIG_IP6_NF_MATCH_MH=m CONFIG_IP6_NF_MATCH_RPFILTER=m CONFIG_IP6_NF_MATCH_RT=m +CONFIG_IP6_NF_MATCH_SRH=m CONFIG_IP6_NF_TARGET_HL=m CONFIG_IP6_NF_FILTER=m CONFIG_IP6_NF_TARGET_REJECT=m @@ -1144,15 +1526,20 @@ CONFIG_IP6_NF_SECURITY=m CONFIG_IP6_NF_NAT=m CONFIG_IP6_NF_TARGET_MASQUERADE=m CONFIG_IP6_NF_TARGET_NPT=m +# end of IPv6: Netfilter Configuration + +CONFIG_NF_DEFRAG_IPV6=m # # DECnet: Netfilter Configuration # # CONFIG_DECNET_NF_GRABULATOR is not set +# end of DECnet: Netfilter Configuration + CONFIG_NF_TABLES_BRIDGE=m CONFIG_NFT_BRIDGE_META=m CONFIG_NFT_BRIDGE_REJECT=m -CONFIG_NF_LOG_BRIDGE=m +CONFIG_NF_CONNTRACK_BRIDGE=m CONFIG_BRIDGE_NF_EBTABLES=m CONFIG_BRIDGE_EBT_BROUTE=m CONFIG_BRIDGE_EBT_T_FILTER=m @@ -1174,6 +1561,7 @@ CONFIG_BRIDGE_EBT_REDIRECT=m CONFIG_BRIDGE_EBT_SNAT=m CONFIG_BRIDGE_EBT_LOG=m CONFIG_BRIDGE_EBT_NFLOG=m +# CONFIG_BPFILTER is not set CONFIG_IP_DCCP=m CONFIG_INET_DCCP_DIAG=m @@ -1182,11 +1570,14 @@ CONFIG_INET_DCCP_DIAG=m # # CONFIG_IP_DCCP_CCID2_DEBUG is not set # CONFIG_IP_DCCP_CCID3 is not set +# end of DCCP CCIDs Configuration # # DCCP Kernel Hacking # # CONFIG_IP_DCCP_DEBUG is not set +# end of DCCP Kernel Hacking + CONFIG_IP_SCTP=m # CONFIG_SCTP_DBG_OBJCNT is not set CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y @@ -1194,6 +1585,7 @@ CONFIG_SCTP_DEFAULT_COOKIE_HMAC_MD5=y # CONFIG_SCTP_DEFAULT_COOKIE_HMAC_NONE is not set CONFIG_SCTP_COOKIE_HMAC_MD5=y CONFIG_SCTP_COOKIE_HMAC_SHA1=y +CONFIG_INET_SCTP_DIAG=m CONFIG_RDS=m CONFIG_RDS_RDMA=m CONFIG_RDS_TCP=m @@ -1201,6 +1593,8 @@ CONFIG_RDS_TCP=m CONFIG_TIPC=m CONFIG_TIPC_MEDIA_IB=y CONFIG_TIPC_MEDIA_UDP=y +CONFIG_TIPC_CRYPTO=y +CONFIG_TIPC_DIAG=m CONFIG_ATM=m CONFIG_ATM_CLIP=m # CONFIG_ATM_CLIP_NO_ICMP is not set @@ -1215,25 +1609,39 @@ CONFIG_L2TP_IP=m CONFIG_L2TP_ETH=m CONFIG_STP=m CONFIG_GARP=m +CONFIG_MRP=m CONFIG_BRIDGE=m CONFIG_BRIDGE_IGMP_SNOOPING=y CONFIG_BRIDGE_VLAN_FILTERING=y -CONFIG_HAVE_NET_DSA=y +CONFIG_BRIDGE_MRP=y +CONFIG_BRIDGE_CFM=y CONFIG_NET_DSA=m -CONFIG_NET_DSA_HWMON=y -CONFIG_NET_DSA_TAG_BRCM=y -CONFIG_NET_DSA_TAG_DSA=y -CONFIG_NET_DSA_TAG_EDSA=y -CONFIG_NET_DSA_TAG_TRAILER=y +CONFIG_NET_DSA_TAG_8021Q=m +CONFIG_NET_DSA_TAG_AR9331=m +CONFIG_NET_DSA_TAG_BRCM_COMMON=m +CONFIG_NET_DSA_TAG_BRCM=m +CONFIG_NET_DSA_TAG_BRCM_LEGACY=m +CONFIG_NET_DSA_TAG_BRCM_PREPEND=m +CONFIG_NET_DSA_TAG_HELLCREEK=m +CONFIG_NET_DSA_TAG_GSWIP=m +CONFIG_NET_DSA_TAG_DSA_COMMON=m +CONFIG_NET_DSA_TAG_DSA=m +CONFIG_NET_DSA_TAG_EDSA=m +CONFIG_NET_DSA_TAG_MTK=m +CONFIG_NET_DSA_TAG_KSZ=m +CONFIG_NET_DSA_TAG_RTL4_A=m +CONFIG_NET_DSA_TAG_QCA=m +CONFIG_NET_DSA_TAG_LAN9303=m +CONFIG_NET_DSA_TAG_SJA1105=m +CONFIG_NET_DSA_TAG_TRAILER=m +CONFIG_NET_DSA_TAG_XRS700X=m CONFIG_VLAN_8021Q=m CONFIG_VLAN_8021Q_GVRP=y -# CONFIG_VLAN_8021Q_MVRP is not set +CONFIG_VLAN_8021Q_MVRP=y CONFIG_DECNET=m # CONFIG_DECNET_ROUTER is not set CONFIG_LLC=m CONFIG_LLC2=m -CONFIG_IPX=m -# CONFIG_IPX_INTERN is not set CONFIG_ATALK=m CONFIG_DEV_APPLETALK=m CONFIG_IPDDP=m @@ -1242,6 +1650,7 @@ CONFIG_IPDDP_ENCAP=y # CONFIG_LAPB is not set # CONFIG_PHONET is not set CONFIG_6LOWPAN=m +CONFIG_6LOWPAN_DEBUGFS=y CONFIG_6LOWPAN_NHC=m CONFIG_6LOWPAN_NHC_DEST=m CONFIG_6LOWPAN_NHC_FRAGMENT=m @@ -1250,6 +1659,12 @@ CONFIG_6LOWPAN_NHC_IPV6=m CONFIG_6LOWPAN_NHC_MOBILITY=m CONFIG_6LOWPAN_NHC_ROUTING=m CONFIG_6LOWPAN_NHC_UDP=m +CONFIG_6LOWPAN_GHC_EXT_HDR_HOP=m +CONFIG_6LOWPAN_GHC_UDP=m +CONFIG_6LOWPAN_GHC_ICMPV6=m +CONFIG_6LOWPAN_GHC_EXT_HDR_DEST=m +CONFIG_6LOWPAN_GHC_EXT_HDR_FRAG=m +CONFIG_6LOWPAN_GHC_EXT_HDR_ROUTE=m CONFIG_IEEE802154=m # CONFIG_IEEE802154_NL802154_EXPERIMENTAL is not set CONFIG_IEEE802154_SOCKET=m @@ -1271,20 +1686,28 @@ CONFIG_NET_SCH_SFB=m CONFIG_NET_SCH_SFQ=m CONFIG_NET_SCH_TEQL=m CONFIG_NET_SCH_TBF=m +CONFIG_NET_SCH_CBS=m +CONFIG_NET_SCH_ETF=m +CONFIG_NET_SCH_TAPRIO=m CONFIG_NET_SCH_GRED=m CONFIG_NET_SCH_DSMARK=m CONFIG_NET_SCH_NETEM=m CONFIG_NET_SCH_DRR=m CONFIG_NET_SCH_MQPRIO=m +CONFIG_NET_SCH_SKBPRIO=m CONFIG_NET_SCH_CHOKE=m CONFIG_NET_SCH_QFQ=m CONFIG_NET_SCH_CODEL=m CONFIG_NET_SCH_FQ_CODEL=m +CONFIG_NET_SCH_CAKE=m CONFIG_NET_SCH_FQ=m CONFIG_NET_SCH_HHF=m CONFIG_NET_SCH_PIE=m +CONFIG_NET_SCH_FQ_PIE=m CONFIG_NET_SCH_INGRESS=m CONFIG_NET_SCH_PLUG=m +CONFIG_NET_SCH_ETS=m +# CONFIG_NET_SCH_DEFAULT is not set # # Classification @@ -1303,6 +1726,7 @@ CONFIG_NET_CLS_FLOW=m CONFIG_NET_CLS_CGROUP=y CONFIG_NET_CLS_BPF=m CONFIG_NET_CLS_FLOWER=m +CONFIG_NET_CLS_MATCHALL=m CONFIG_NET_EMATCH=y CONFIG_NET_EMATCH_STACK=32 CONFIG_NET_EMATCH_CMP=m @@ -1312,52 +1736,79 @@ CONFIG_NET_EMATCH_META=m CONFIG_NET_EMATCH_TEXT=m CONFIG_NET_EMATCH_CANID=m CONFIG_NET_EMATCH_IPSET=m +CONFIG_NET_EMATCH_IPT=m CONFIG_NET_CLS_ACT=y CONFIG_NET_ACT_POLICE=y CONFIG_NET_ACT_GACT=m CONFIG_GACT_PROB=y CONFIG_NET_ACT_MIRRED=m +CONFIG_NET_ACT_SAMPLE=m CONFIG_NET_ACT_IPT=m CONFIG_NET_ACT_NAT=m CONFIG_NET_ACT_PEDIT=m CONFIG_NET_ACT_SIMP=m CONFIG_NET_ACT_SKBEDIT=m CONFIG_NET_ACT_CSUM=m +CONFIG_NET_ACT_MPLS=m CONFIG_NET_ACT_VLAN=m CONFIG_NET_ACT_BPF=m CONFIG_NET_ACT_CONNMARK=m -# CONFIG_NET_CLS_IND is not set +CONFIG_NET_ACT_CTINFO=m +CONFIG_NET_ACT_SKBMOD=m +CONFIG_NET_ACT_IFE=m +CONFIG_NET_ACT_TUNNEL_KEY=m +CONFIG_NET_ACT_CT=m +CONFIG_NET_ACT_GATE=m +CONFIG_NET_IFE_SKBMARK=m +CONFIG_NET_IFE_SKBPRIO=m +CONFIG_NET_IFE_SKBTCINDEX=m +CONFIG_NET_TC_SKB_EXT=y CONFIG_NET_SCH_FIFO=y # CONFIG_DCB is not set CONFIG_DNS_RESOLVER=y CONFIG_BATMAN_ADV=m +CONFIG_BATMAN_ADV_BATMAN_V=y CONFIG_BATMAN_ADV_BLA=y CONFIG_BATMAN_ADV_DAT=y CONFIG_BATMAN_ADV_NC=y CONFIG_BATMAN_ADV_MCAST=y # CONFIG_BATMAN_ADV_DEBUG is not set +CONFIG_BATMAN_ADV_TRACING=y CONFIG_OPENVSWITCH=m CONFIG_OPENVSWITCH_GRE=m CONFIG_OPENVSWITCH_VXLAN=m CONFIG_OPENVSWITCH_GENEVE=m CONFIG_VSOCKETS=m +CONFIG_VSOCKETS_DIAG=m +CONFIG_VSOCKETS_LOOPBACK=m CONFIG_VMWARE_VMCI_VSOCKETS=m +CONFIG_VIRTIO_VSOCKETS=m +CONFIG_VIRTIO_VSOCKETS_COMMON=m +CONFIG_HYPERV_VSOCKETS=m CONFIG_NETLINK_DIAG=m CONFIG_MPLS=y CONFIG_NET_MPLS_GSO=m CONFIG_MPLS_ROUTING=m CONFIG_MPLS_IPTUNNEL=m +CONFIG_NET_NSH=m CONFIG_HSR=m CONFIG_NET_SWITCHDEV=y -# CONFIG_NET_L3_MASTER_DEV is not set +CONFIG_NET_L3_MASTER_DEV=y +CONFIG_QRTR=m +CONFIG_QRTR_SMD=m +CONFIG_QRTR_TUN=m +CONFIG_QRTR_MHI=m +# CONFIG_NET_NCSI is not set +CONFIG_PCPU_DEV_REFCNT=y CONFIG_RPS=y CONFIG_RFS_ACCEL=y +CONFIG_SOCK_RX_QUEUE_MAPPING=y CONFIG_XPS=y CONFIG_CGROUP_NET_PRIO=y CONFIG_CGROUP_NET_CLASSID=y CONFIG_NET_RX_BUSY_POLL=y CONFIG_BQL=y -CONFIG_BPF_JIT=y +CONFIG_BPF_STREAM_PARSER=y CONFIG_NET_FLOW_LIMIT=y # @@ -1365,6 +1816,9 @@ CONFIG_NET_FLOW_LIMIT=y # # CONFIG_NET_PKTGEN is not set # CONFIG_NET_DROP_MONITOR is not set +# end of Network testing +# end of Networking options + CONFIG_HAMRADIO=y # @@ -1385,106 +1839,76 @@ CONFIG_BAYCOM_SER_FDX=m CONFIG_BAYCOM_SER_HDX=m CONFIG_BAYCOM_PAR=m CONFIG_YAM=m +# end of AX.25 network device drivers + CONFIG_CAN=m CONFIG_CAN_RAW=m CONFIG_CAN_BCM=m CONFIG_CAN_GW=m +CONFIG_CAN_J1939=m +CONFIG_CAN_ISOTP=m # # CAN Device Drivers # CONFIG_CAN_VCAN=m +CONFIG_CAN_VXCAN=m CONFIG_CAN_SLCAN=m CONFIG_CAN_DEV=m CONFIG_CAN_CALC_BITTIMING=y -# CONFIG_CAN_LEDS is not set CONFIG_CAN_JANZ_ICAN3=m -CONFIG_CAN_SJA1000=m -CONFIG_CAN_SJA1000_ISA=m -CONFIG_CAN_SJA1000_PLATFORM=m -CONFIG_CAN_EMS_PCMCIA=m -CONFIG_CAN_EMS_PCI=m -CONFIG_CAN_PEAK_PCMCIA=m -CONFIG_CAN_PEAK_PCI=m -CONFIG_CAN_PEAK_PCIEC=y -CONFIG_CAN_KVASER_PCI=m -CONFIG_CAN_PLX_PCI=m +CONFIG_CAN_KVASER_PCIEFD=m CONFIG_CAN_C_CAN=m CONFIG_CAN_C_CAN_PLATFORM=m CONFIG_CAN_C_CAN_PCI=m -CONFIG_CAN_M_CAN=m CONFIG_CAN_CC770=m CONFIG_CAN_CC770_ISA=m CONFIG_CAN_CC770_PLATFORM=m +CONFIG_CAN_IFI_CANFD=m +CONFIG_CAN_M_CAN=m +CONFIG_CAN_M_CAN_PCI=m +CONFIG_CAN_M_CAN_PLATFORM=m +# CONFIG_CAN_M_CAN_TCAN4X5X is not set +CONFIG_CAN_PEAK_PCIEFD=m +CONFIG_CAN_SJA1000=m +CONFIG_CAN_EMS_PCI=m +CONFIG_CAN_EMS_PCMCIA=m +CONFIG_CAN_F81601=m +CONFIG_CAN_KVASER_PCI=m +CONFIG_CAN_PEAK_PCI=m +CONFIG_CAN_PEAK_PCIEC=y +CONFIG_CAN_PEAK_PCMCIA=m +CONFIG_CAN_PLX_PCI=m +CONFIG_CAN_SJA1000_ISA=m +CONFIG_CAN_SJA1000_PLATFORM=m +CONFIG_CAN_SOFTING=m +CONFIG_CAN_SOFTING_CS=m + +# +# CAN SPI interfaces +# +# CONFIG_CAN_HI311X is not set +# CONFIG_CAN_MCP251X is not set +# CONFIG_CAN_MCP251XFD is not set +# end of CAN SPI interfaces # # CAN USB interfaces # +CONFIG_CAN_8DEV_USB=m CONFIG_CAN_EMS_USB=m CONFIG_CAN_ESD_USB2=m +CONFIG_CAN_ETAS_ES58X=m CONFIG_CAN_GS_USB=m CONFIG_CAN_KVASER_USB=m +CONFIG_CAN_MCBA_USB=m CONFIG_CAN_PEAK_USB=m -CONFIG_CAN_8DEV_USB=m -CONFIG_CAN_SOFTING=m -CONFIG_CAN_SOFTING_CS=m -# CONFIG_CAN_DEBUG_DEVICES is not set -CONFIG_IRDA=m - -# -# IrDA protocols -# -CONFIG_IRLAN=m -CONFIG_IRNET=m -CONFIG_IRCOMM=m -# CONFIG_IRDA_ULTRA is not set - -# -# IrDA options -# -CONFIG_IRDA_CACHE_LAST_LSAP=y -CONFIG_IRDA_FAST_RR=y -# CONFIG_IRDA_DEBUG is not set - -# -# Infrared-port device drivers -# - -# -# SIR device drivers -# -CONFIG_IRTTY_SIR=m +# CONFIG_CAN_UCAN is not set +# end of CAN USB interfaces -# -# Dongle support -# -CONFIG_DONGLE=y -CONFIG_ESI_DONGLE=m -CONFIG_ACTISYS_DONGLE=m -CONFIG_TEKRAM_DONGLE=m -CONFIG_TOIM3232_DONGLE=m -CONFIG_LITELINK_DONGLE=m -CONFIG_MA600_DONGLE=m -CONFIG_GIRBIL_DONGLE=m -CONFIG_MCP2120_DONGLE=m -CONFIG_OLD_BELKIN_DONGLE=m -CONFIG_ACT200L_DONGLE=m -CONFIG_KINGSUN_DONGLE=m -CONFIG_KSDAZZLE_DONGLE=m -CONFIG_KS959_DONGLE=m +# CONFIG_CAN_DEBUG_DEVICES is not set +# end of CAN Device Drivers -# -# FIR device drivers -# -CONFIG_USB_IRDA=m -CONFIG_SIGMATEL_FIR=m -CONFIG_NSC_FIR=m -CONFIG_WINBOND_FIR=m -CONFIG_SMC_IRCC_FIR=m -CONFIG_ALI_FIR=m -CONFIG_VLSI_FIR=m -CONFIG_VIA_FIR=m -CONFIG_MCS_FIR=m CONFIG_BT=m CONFIG_BT_BREDR=y CONFIG_BT_RFCOMM=m @@ -1497,8 +1921,12 @@ CONFIG_BT_HIDP=m CONFIG_BT_HS=y CONFIG_BT_LE=y CONFIG_BT_6LOWPAN=m -# CONFIG_BT_SELFTEST is not set +CONFIG_BT_LEDS=y +CONFIG_BT_MSFTEXT=y +# CONFIG_BT_AOSPEXT is not set # CONFIG_BT_DEBUGFS is not set +# CONFIG_BT_SELFTEST is not set +# CONFIG_BT_FEATURE_DEBUG is not set # # Bluetooth device drivers @@ -1508,33 +1936,48 @@ CONFIG_BT_BCM=m CONFIG_BT_RTL=m CONFIG_BT_QCA=m CONFIG_BT_HCIBTUSB=m +CONFIG_BT_HCIBTUSB_AUTOSUSPEND=y CONFIG_BT_HCIBTUSB_BCM=y +CONFIG_BT_HCIBTUSB_MTK=y CONFIG_BT_HCIBTUSB_RTL=y CONFIG_BT_HCIBTSDIO=m CONFIG_BT_HCIUART=m +CONFIG_BT_HCIUART_SERDEV=y CONFIG_BT_HCIUART_H4=y +CONFIG_BT_HCIUART_NOKIA=m CONFIG_BT_HCIUART_BCSP=y CONFIG_BT_HCIUART_ATH3K=y CONFIG_BT_HCIUART_LL=y CONFIG_BT_HCIUART_3WIRE=y CONFIG_BT_HCIUART_INTEL=y CONFIG_BT_HCIUART_BCM=y +CONFIG_BT_HCIUART_RTL=y CONFIG_BT_HCIUART_QCA=y +CONFIG_BT_HCIUART_AG6XX=y +CONFIG_BT_HCIUART_MRVL=y CONFIG_BT_HCIBCM203X=m CONFIG_BT_HCIBPA10X=m CONFIG_BT_HCIBFUSB=m CONFIG_BT_HCIDTL1=m CONFIG_BT_HCIBT3C=m CONFIG_BT_HCIBLUECARD=m -CONFIG_BT_HCIBTUART=m CONFIG_BT_HCIVHCI=m CONFIG_BT_MRVL=m CONFIG_BT_MRVL_SDIO=m CONFIG_BT_ATH3K=m -CONFIG_BT_WILINK=m +CONFIG_BT_MTKSDIO=m +CONFIG_BT_MTKUART=m +CONFIG_BT_HCIRSI=m +CONFIG_BT_VIRTIO=m +# end of Bluetooth device drivers + CONFIG_AF_RXRPC=m +CONFIG_AF_RXRPC_IPV6=y +# CONFIG_AF_RXRPC_INJECT_LOSS is not set # CONFIG_AF_RXRPC_DEBUG is not set -CONFIG_RXKAD=m +# CONFIG_RXKAD is not set +# CONFIG_AF_KCM is not set +CONFIG_STREAM_PARSER=y CONFIG_FIB_RULES=y CONFIG_WIRELESS=y CONFIG_WIRELESS_EXT=y @@ -1545,11 +1988,11 @@ CONFIG_WEXT_PRIV=y CONFIG_CFG80211=m # CONFIG_NL80211_TESTMODE is not set # CONFIG_CFG80211_DEVELOPER_WARNINGS is not set -# CONFIG_CFG80211_REG_DEBUG is not set # CONFIG_CFG80211_CERTIFICATION_ONUS is not set +CONFIG_CFG80211_REQUIRE_SIGNED_REGDB=y +CONFIG_CFG80211_USE_KERNEL_REGDB_KEYS=y CONFIG_CFG80211_DEFAULT_PS=y # CONFIG_CFG80211_DEBUGFS is not set -# CONFIG_CFG80211_INTERNAL_REGDB is not set CONFIG_CFG80211_CRDA_SUPPORT=y CONFIG_CFG80211_WEXT=y CONFIG_CFG80211_WEXT_EXPORT=y @@ -1561,8 +2004,6 @@ CONFIG_LIB80211_CRYPT_TKIP=m CONFIG_MAC80211=m CONFIG_MAC80211_HAS_RC=y CONFIG_MAC80211_RC_MINSTREL=y -CONFIG_MAC80211_RC_MINSTREL_HT=y -# CONFIG_MAC80211_RC_MINSTREL_VHT is not set CONFIG_MAC80211_RC_DEFAULT_MINSTREL=y CONFIG_MAC80211_RC_DEFAULT="minstrel_ht" CONFIG_MAC80211_MESH=y @@ -1571,15 +2012,13 @@ CONFIG_MAC80211_LEDS=y # CONFIG_MAC80211_MESSAGE_TRACING is not set # CONFIG_MAC80211_DEBUG_MENU is not set CONFIG_MAC80211_STA_HASH_MAX_SIZE=0 -CONFIG_WIMAX=m -CONFIG_WIMAX_DEBUG_LEVEL=8 CONFIG_RFKILL=m CONFIG_RFKILL_LEDS=y CONFIG_RFKILL_INPUT=y -CONFIG_RFKILL_REGULATOR=m CONFIG_RFKILL_GPIO=m CONFIG_NET_9P=m CONFIG_NET_9P_VIRTIO=m +# CONFIG_NET_9P_XEN is not set CONFIG_NET_9P_RDMA=m # CONFIG_NET_9P_DEBUG is not set # CONFIG_CAIF is not set @@ -1589,6 +2028,7 @@ CONFIG_CEPH_LIB=m CONFIG_NFC=m CONFIG_NFC_DIGITAL=m CONFIG_NFC_NCI=m +# CONFIG_NFC_NCI_SPI is not set # CONFIG_NFC_NCI_UART is not set CONFIG_NFC_HCI=m # CONFIG_NFC_SHDLC is not set @@ -1596,72 +2036,220 @@ CONFIG_NFC_HCI=m # # Near Field Communication (NFC) devices # -CONFIG_NFC_PN533=m -CONFIG_NFC_WILINK=m +# CONFIG_NFC_TRF7970A is not set # CONFIG_NFC_MEI_PHY is not set CONFIG_NFC_SIM=m CONFIG_NFC_PORT100=m +CONFIG_NFC_VIRTUAL_NCI=m # CONFIG_NFC_FDP is not set +CONFIG_NFC_PN533=m +CONFIG_NFC_PN533_USB=m +CONFIG_NFC_PN533_I2C=m +CONFIG_NFC_PN532_UART=m CONFIG_NFC_MRVL=m CONFIG_NFC_MRVL_USB=m # CONFIG_NFC_MRVL_I2C is not set -CONFIG_NFC_ST21NFCA=m -# CONFIG_NFC_ST_NCI is not set +CONFIG_NFC_ST_NCI=m +CONFIG_NFC_ST_NCI_I2C=m +# CONFIG_NFC_ST_NCI_SPI is not set CONFIG_NFC_NXP_NCI=m CONFIG_NFC_NXP_NCI_I2C=m # CONFIG_NFC_S3FWRN5_I2C is not set +# CONFIG_NFC_S3FWRN82_UART is not set +# CONFIG_NFC_ST95HF is not set +# end of Near Field Communication (NFC) devices + +CONFIG_PSAMPLE=m +CONFIG_NET_IFE=m CONFIG_LWTUNNEL=y +CONFIG_LWTUNNEL_BPF=y CONFIG_DST_CACHE=y -CONFIG_HAVE_BPF_JIT=y -CONFIG_HAVE_EBPF_JIT=y +CONFIG_GRO_CELLS=y +CONFIG_NET_SELFTESTS=m +CONFIG_NET_SOCK_MSG=y +CONFIG_NET_DEVLINK=y +CONFIG_PAGE_POOL=y +CONFIG_FAILOVER=m +CONFIG_ETHTOOL_NETLINK=y # # Device Drivers # +CONFIG_HAVE_EISA=y +# CONFIG_EISA is not set +CONFIG_HAVE_PCI=y +CONFIG_PCI=y +CONFIG_PCI_DOMAINS=y +CONFIG_PCIEPORTBUS=y +CONFIG_HOTPLUG_PCI_PCIE=y +CONFIG_PCIEAER=y +CONFIG_PCIEAER_INJECT=m +# CONFIG_PCIE_ECRC is not set +CONFIG_PCIEASPM=y +CONFIG_PCIEASPM_DEFAULT=y +# CONFIG_PCIEASPM_POWERSAVE is not set +# CONFIG_PCIEASPM_POWER_SUPERSAVE is not set +# CONFIG_PCIEASPM_PERFORMANCE is not set +CONFIG_PCIE_PME=y +CONFIG_PCIE_DPC=y +CONFIG_PCIE_PTM=y +CONFIG_PCIE_EDR=y +CONFIG_PCI_MSI=y +CONFIG_PCI_MSI_IRQ_DOMAIN=y +CONFIG_PCI_QUIRKS=y +# CONFIG_PCI_DEBUG is not set +# CONFIG_PCI_REALLOC_ENABLE_AUTO is not set +CONFIG_PCI_STUB=m +CONFIG_PCI_PF_STUB=m +CONFIG_XEN_PCIDEV_FRONTEND=y +CONFIG_PCI_ATS=y +CONFIG_PCI_LOCKLESS_CONFIG=y +CONFIG_PCI_IOV=y +CONFIG_PCI_PRI=y +CONFIG_PCI_PASID=y +CONFIG_PCI_P2PDMA=y +CONFIG_PCI_LABEL=y +CONFIG_PCI_HYPERV=m +# CONFIG_PCIE_BUS_TUNE_OFF is not set +CONFIG_PCIE_BUS_DEFAULT=y +# CONFIG_PCIE_BUS_SAFE is not set +# CONFIG_PCIE_BUS_PERFORMANCE is not set +# CONFIG_PCIE_BUS_PEER2PEER is not set +CONFIG_HOTPLUG_PCI=y +CONFIG_HOTPLUG_PCI_ACPI=y +CONFIG_HOTPLUG_PCI_ACPI_IBM=m +# CONFIG_HOTPLUG_PCI_CPCI is not set +# CONFIG_HOTPLUG_PCI_SHPC is not set + +# +# PCI controller drivers +# +CONFIG_VMD=m +CONFIG_PCI_HYPERV_INTERFACE=m + +# +# DesignWare PCI Core Support +# +# CONFIG_PCIE_DW_PLAT_HOST is not set +# CONFIG_PCI_MESON is not set +# end of DesignWare PCI Core Support + +# +# Mobiveil PCIe Core Support +# +# end of Mobiveil PCIe Core Support + +# +# Cadence PCIe controllers support +# +# end of Cadence PCIe controllers support +# end of PCI controller drivers + +# +# PCI Endpoint +# +# CONFIG_PCI_ENDPOINT is not set +# end of PCI Endpoint + +# +# PCI switch controller drivers +# +CONFIG_PCI_SW_SWITCHTEC=m +# end of PCI switch controller drivers + +CONFIG_CXL_BUS=y +CONFIG_CXL_MEM=m +# CONFIG_CXL_MEM_RAW_COMMANDS is not set +CONFIG_PCCARD=m +CONFIG_PCMCIA=m +CONFIG_PCMCIA_LOAD_CIS=y +CONFIG_CARDBUS=y + +# +# PC-card bridges +# +CONFIG_YENTA=m +CONFIG_YENTA_O2=y +CONFIG_YENTA_RICOH=y +CONFIG_YENTA_TI=y +CONFIG_YENTA_ENE_TUNE=y +CONFIG_YENTA_TOSHIBA=y +CONFIG_PD6729=m +CONFIG_I82092=m +CONFIG_PCCARD_NONSTATIC=y +# CONFIG_RAPIDIO is not set # # Generic Driver Options # +CONFIG_AUXILIARY_BUS=y CONFIG_UEVENT_HELPER=y CONFIG_UEVENT_HELPER_PATH="" CONFIG_DEVTMPFS=y CONFIG_DEVTMPFS_MOUNT=y CONFIG_STANDALONE=y CONFIG_PREVENT_FIRMWARE_BUILD=y + +# +# Firmware loader +# CONFIG_FW_LOADER=y -# CONFIG_FIRMWARE_IN_KERNEL is not set +CONFIG_FW_LOADER_PAGED_BUF=y CONFIG_EXTRA_FIRMWARE="" CONFIG_FW_LOADER_USER_HELPER=y # CONFIG_FW_LOADER_USER_HELPER_FALLBACK is not set +CONFIG_FW_LOADER_COMPRESS=y +CONFIG_FW_CACHE=y +# end of Firmware loader + CONFIG_WANT_DEV_COREDUMP=y CONFIG_ALLOW_DEV_COREDUMP=y CONFIG_DEV_COREDUMP=y # CONFIG_DEBUG_DRIVER is not set # CONFIG_DEBUG_DEVRES is not set +# CONFIG_DEBUG_TEST_DRIVER_REMOVE is not set +CONFIG_HMEM_REPORTING=y +CONFIG_TEST_ASYNC_DRIVER_PROBE=m CONFIG_SYS_HYPERVISOR=y -# CONFIG_GENERIC_CPU_DEVICES is not set CONFIG_GENERIC_CPU_AUTOPROBE=y CONFIG_GENERIC_CPU_VULNERABILITIES=y CONFIG_REGMAP=y CONFIG_REGMAP_I2C=m +CONFIG_REGMAP_SPI=m CONFIG_REGMAP_MMIO=y CONFIG_REGMAP_IRQ=y +CONFIG_REGMAP_SOUNDWIRE=m +CONFIG_REGMAP_SOUNDWIRE_MBQ=m +CONFIG_REGMAP_SCCB=m +CONFIG_REGMAP_SPI_AVMM=m CONFIG_DMA_SHARED_BUFFER=y -# CONFIG_FENCE_TRACE is not set +# CONFIG_DMA_FENCE_TRACE is not set +# end of Generic Driver Options # # Bus devices # +CONFIG_MHI_BUS=m +# CONFIG_MHI_BUS_DEBUG is not set +CONFIG_MHI_BUS_PCI_GENERIC=m +# end of Bus devices + CONFIG_CONNECTOR=y CONFIG_PROC_EVENTS=y +# CONFIG_GNSS is not set CONFIG_MTD=m CONFIG_MTD_TESTS=m + +# +# Partition parsers +# +CONFIG_MTD_AR7_PARTS=m +CONFIG_MTD_CMDLINE_PARTS=m CONFIG_MTD_REDBOOT_PARTS=m CONFIG_MTD_REDBOOT_DIRECTORY_BLOCK=-1 # CONFIG_MTD_REDBOOT_PARTS_UNALLOCATED is not set # CONFIG_MTD_REDBOOT_PARTS_READONLY is not set -CONFIG_MTD_CMDLINE_PARTS=m -CONFIG_MTD_AR7_PARTS=m +# end of Partition parsers # # User Modules And Translation Layers @@ -1709,6 +2297,7 @@ CONFIG_MTD_CFI_UTIL=m CONFIG_MTD_RAM=m CONFIG_MTD_ROM=m CONFIG_MTD_ABSENT=m +# end of RAM/ROM/Flash chip drivers # # Mapping drivers for chip access @@ -1716,6 +2305,7 @@ CONFIG_MTD_ABSENT=m CONFIG_MTD_COMPLEX_MAPPINGS=y CONFIG_MTD_PHYSMAP=m # CONFIG_MTD_PHYSMAP_COMPAT is not set +# CONFIG_MTD_PHYSMAP_GPIO_ADDR is not set CONFIG_MTD_SBC_GXX=m CONFIG_MTD_AMD76XROM=m CONFIG_MTD_ICHXROM=m @@ -1727,10 +2317,9 @@ CONFIG_MTD_L440GX=m CONFIG_MTD_PCI=m CONFIG_MTD_PCMCIA=m # CONFIG_MTD_PCMCIA_ANONYMOUS is not set -CONFIG_MTD_GPIO_ADDR=m CONFIG_MTD_INTEL_VR_NOR=m CONFIG_MTD_PLATRAM=m -CONFIG_MTD_LATCH_ADDR=m +# end of Mapping drivers for chip access # # Self-contained MTD device drivers @@ -1738,6 +2327,9 @@ CONFIG_MTD_LATCH_ADDR=m CONFIG_MTD_PMC551=m CONFIG_MTD_PMC551_BUGFIX=y # CONFIG_MTD_PMC551_DEBUG is not set +# CONFIG_MTD_DATAFLASH is not set +# CONFIG_MTD_MCHP23K256 is not set +# CONFIG_MTD_SST25L is not set CONFIG_MTD_SLRAM=m CONFIG_MTD_PHRAM=m CONFIG_MTD_MTDRAM=m @@ -1751,41 +2343,60 @@ CONFIG_MTD_BLOCK2MTD=m CONFIG_MTD_DOCG3=m CONFIG_BCH_CONST_M=14 CONFIG_BCH_CONST_T=4 -CONFIG_MTD_NAND_ECC=m -CONFIG_MTD_NAND_ECC_SMC=y -CONFIG_MTD_NAND=m -CONFIG_MTD_NAND_BCH=m -CONFIG_MTD_NAND_ECC_BCH=y -CONFIG_MTD_SM_COMMON=m +# end of Self-contained MTD device drivers + +# +# NAND +# +CONFIG_MTD_NAND_CORE=m +CONFIG_MTD_ONENAND=m +CONFIG_MTD_ONENAND_VERIFY_WRITE=y +CONFIG_MTD_ONENAND_GENERIC=m +CONFIG_MTD_ONENAND_OTP=y +CONFIG_MTD_ONENAND_2X_PROGRAM=y +CONFIG_MTD_RAW_NAND=m + +# +# Raw/parallel NAND flash controllers +# CONFIG_MTD_NAND_DENALI=m CONFIG_MTD_NAND_DENALI_PCI=m -CONFIG_MTD_NAND_DENALI_DT=m -CONFIG_MTD_NAND_DENALI_SCRATCH_REG_ADDR=0xFF108018 +CONFIG_MTD_NAND_CAFE=m +# CONFIG_MTD_NAND_MXIC is not set CONFIG_MTD_NAND_GPIO=m -# CONFIG_MTD_NAND_OMAP_BCH_BUILD is not set -CONFIG_MTD_NAND_IDS=m +CONFIG_MTD_NAND_PLATFORM=m +CONFIG_MTD_NAND_ARASAN=m + +# +# Misc +# +CONFIG_MTD_SM_COMMON=m +CONFIG_MTD_NAND_NANDSIM=m CONFIG_MTD_NAND_RICOH=m CONFIG_MTD_NAND_DISKONCHIP=m CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADVANCED=y CONFIG_MTD_NAND_DISKONCHIP_PROBE_ADDRESS=0 CONFIG_MTD_NAND_DISKONCHIP_PROBE_HIGH=y CONFIG_MTD_NAND_DISKONCHIP_BBTWRITE=y -CONFIG_MTD_NAND_DOCG4=m -CONFIG_MTD_NAND_CAFE=m -CONFIG_MTD_NAND_NANDSIM=m -CONFIG_MTD_NAND_PLATFORM=m -CONFIG_MTD_NAND_HISI504=m -CONFIG_MTD_ONENAND=m -CONFIG_MTD_ONENAND_VERIFY_WRITE=y -CONFIG_MTD_ONENAND_GENERIC=m -CONFIG_MTD_ONENAND_OTP=y -CONFIG_MTD_ONENAND_2X_PROGRAM=y +# CONFIG_MTD_SPI_NAND is not set + +# +# ECC engine support +# +CONFIG_MTD_NAND_ECC=y +CONFIG_MTD_NAND_ECC_SW_HAMMING=y +# CONFIG_MTD_NAND_ECC_SW_HAMMING_SMC is not set +# CONFIG_MTD_NAND_ECC_SW_BCH is not set +# end of ECC engine support +# end of NAND # # LPDDR & LPDDR2 PCM memory drivers # CONFIG_MTD_LPDDR=m CONFIG_MTD_QINFO_PROBE=m +# end of LPDDR & LPDDR2 PCM memory drivers + # CONFIG_MTD_SPI_NOR is not set CONFIG_MTD_UBI=m CONFIG_MTD_UBI_WL_THRESHOLD=4096 @@ -1793,6 +2404,7 @@ CONFIG_MTD_UBI_BEB_LIMIT=20 # CONFIG_MTD_UBI_FASTMAP is not set CONFIG_MTD_UBI_GLUEBI=m # CONFIG_MTD_UBI_BLOCK is not set +# CONFIG_MTD_HYPERBUS is not set # CONFIG_OF is not set CONFIG_ARCH_MIGHT_HAVE_PC_PARPORT=y CONFIG_PARPORT=m @@ -1801,7 +2413,6 @@ CONFIG_PARPORT_SERIAL=m # CONFIG_PARPORT_PC_FIFO is not set # CONFIG_PARPORT_PC_SUPERIO is not set CONFIG_PARPORT_PC_PCMCIA=m -# CONFIG_PARPORT_GSC is not set CONFIG_PARPORT_AX88796=m CONFIG_PARPORT_1284=y CONFIG_PARPORT_NOT_PC=y @@ -1815,6 +2426,7 @@ CONFIG_PNPACPI=y CONFIG_BLK_DEV=y CONFIG_BLK_DEV_NULL_BLK=m CONFIG_BLK_DEV_FD=y +CONFIG_CDROM=y CONFIG_PARIDE=m # @@ -1846,25 +2458,25 @@ CONFIG_PARIDE_ON20=m CONFIG_PARIDE_ON26=m CONFIG_BLK_DEV_PCIESSD_MTIP32XX=m CONFIG_ZRAM=m -# CONFIG_ZRAM_LZ4_COMPRESS is not set -CONFIG_BLK_CPQ_CISS_DA=m -CONFIG_CISS_SCSI_TAPE=y -CONFIG_BLK_DEV_DAC960=m -CONFIG_BLK_DEV_UMEM=m -# CONFIG_BLK_DEV_COW_COMMON is not set +CONFIG_ZRAM_DEF_COMP_LZORLE=y +# CONFIG_ZRAM_DEF_COMP_ZSTD is not set +# CONFIG_ZRAM_DEF_COMP_LZ4 is not set +# CONFIG_ZRAM_DEF_COMP_LZO is not set +# CONFIG_ZRAM_DEF_COMP_LZ4HC is not set +# CONFIG_ZRAM_DEF_COMP_842 is not set +CONFIG_ZRAM_DEF_COMP="lzo-rle" +# CONFIG_ZRAM_WRITEBACK is not set +# CONFIG_ZRAM_MEMORY_TRACKING is not set CONFIG_BLK_DEV_LOOP=m CONFIG_BLK_DEV_LOOP_MIN_COUNT=8 CONFIG_BLK_DEV_CRYPTOLOOP=m CONFIG_BLK_DEV_DRBD=m # CONFIG_DRBD_FAULT_INJECTION is not set CONFIG_BLK_DEV_NBD=m -CONFIG_BLK_DEV_SKD=m -CONFIG_BLK_DEV_OSD=m CONFIG_BLK_DEV_SX8=m CONFIG_BLK_DEV_RAM=y CONFIG_BLK_DEV_RAM_COUNT=16 CONFIG_BLK_DEV_RAM_SIZE=16384 -CONFIG_BLK_DEV_RAM_DAX=y CONFIG_CDROM_PKTCDVD=m CONFIG_CDROM_PKTCDVD_BUFFERS=8 # CONFIG_CDROM_PKTCDVD_WCACHE is not set @@ -1872,10 +2484,31 @@ CONFIG_ATA_OVER_ETH=m CONFIG_XEN_BLKDEV_FRONTEND=y CONFIG_XEN_BLKDEV_BACKEND=y CONFIG_VIRTIO_BLK=m -# CONFIG_BLK_DEV_HD is not set CONFIG_BLK_DEV_RBD=m CONFIG_BLK_DEV_RSXX=m -CONFIG_BLK_DEV_NVME=m +CONFIG_BLK_DEV_RNBD=y +CONFIG_BLK_DEV_RNBD_CLIENT=m +CONFIG_BLK_DEV_RNBD_SERVER=m + +# +# NVME Support +# +CONFIG_NVME_CORE=y +CONFIG_BLK_DEV_NVME=y +CONFIG_NVME_MULTIPATH=y +CONFIG_NVME_HWMON=y +CONFIG_NVME_FABRICS=m +CONFIG_NVME_RDMA=m +CONFIG_NVME_FC=m +CONFIG_NVME_TCP=m +CONFIG_NVME_TARGET=m +CONFIG_NVME_TARGET_PASSTHRU=y +CONFIG_NVME_TARGET_LOOP=m +CONFIG_NVME_TARGET_RDMA=m +CONFIG_NVME_TARGET_FC=m +CONFIG_NVME_TARGET_FCLOOP=m +CONFIG_NVME_TARGET_TCP=m +# end of NVME Support # # Misc devices @@ -1883,10 +2516,10 @@ CONFIG_BLK_DEV_NVME=m CONFIG_SENSORS_LIS3LV02D=m CONFIG_AD525X_DPOT=m CONFIG_AD525X_DPOT_I2C=m +# CONFIG_AD525X_DPOT_SPI is not set CONFIG_DUMMY_IRQ=m CONFIG_IBM_ASM=m CONFIG_PHANTOM=m -CONFIG_SGI_IOC4=m CONFIG_TIFM_CORE=m CONFIG_TIFM_7XX1=m CONFIG_ICS932S401=m @@ -1896,25 +2529,32 @@ CONFIG_APDS9802ALS=m CONFIG_ISL29003=m CONFIG_ISL29020=m CONFIG_SENSORS_TSL2550=m -CONFIG_SENSORS_BH1780=m CONFIG_SENSORS_BH1770=m CONFIG_SENSORS_APDS990X=m CONFIG_HMC6352=m CONFIG_DS1682=m CONFIG_VMWARE_BALLOON=m -CONFIG_BMP085=m -CONFIG_BMP085_I2C=m -CONFIG_USB_SWITCH_FSA9480=m +# CONFIG_LATTICE_ECP3_CONFIG is not set # CONFIG_SRAM is not set +CONFIG_DW_XDATA_PCIE=m +# CONFIG_PCI_ENDPOINT_TEST is not set +# CONFIG_XILINX_SDFEC is not set +CONFIG_MISC_RTSX=m # CONFIG_C2PORT is not set # # EEPROM support # CONFIG_EEPROM_AT24=m +# CONFIG_EEPROM_AT25 is not set CONFIG_EEPROM_LEGACY=m CONFIG_EEPROM_MAX6875=m CONFIG_EEPROM_93CX6=m +# CONFIG_EEPROM_93XX46 is not set +CONFIG_EEPROM_IDT_89HPESX=m +CONFIG_EEPROM_EE1004=m +# end of EEPROM support + CONFIG_CB710_CORE=m # CONFIG_CB710_DEBUG is not set CONFIG_CB710_DEBUG_ASSUMPTIONS=y @@ -1923,52 +2563,34 @@ CONFIG_CB710_DEBUG_ASSUMPTIONS=y # Texas Instruments shared transport line discipline # CONFIG_TI_ST=m +# end of Texas Instruments shared transport line discipline + CONFIG_SENSORS_LIS3_I2C=m # -# Altera FPGA firmware download module +# Altera FPGA firmware download module (requires I2C) # CONFIG_ALTERA_STAPL=m CONFIG_INTEL_MEI=m CONFIG_INTEL_MEI_ME=m CONFIG_INTEL_MEI_TXE=m +CONFIG_INTEL_MEI_HDCP=m CONFIG_VMWARE_VMCI=m - -# -# Intel MIC Bus Driver -# -CONFIG_INTEL_MIC_BUS=m - -# -# SCIF Bus Driver -# -CONFIG_SCIF_BUS=m - -# -# Intel MIC Host Driver -# -CONFIG_INTEL_MIC_HOST=m - -# -# Intel MIC Card Driver -# -CONFIG_INTEL_MIC_CARD=m - -# -# SCIF Driver -# -CONFIG_SCIF=m - -# -# Intel MIC Coprocessor State Management (COSM) Drivers -# -CONFIG_MIC_COSM=m CONFIG_GENWQE=m CONFIG_GENWQE_PLATFORM_ERROR_RECOVERY=0 # CONFIG_ECHO is not set -# CONFIG_CXL_BASE is not set -# CONFIG_CXL_KERNEL_API is not set -# CONFIG_CXL_EEH is not set +CONFIG_BCM_VK=m +CONFIG_BCM_VK_TTY=y +CONFIG_MISC_ALCOR_PCI=m +CONFIG_MISC_RTSX_PCI=m +CONFIG_MISC_RTSX_USB=m +# CONFIG_HABANA_AI is not set +CONFIG_UACCE=m +CONFIG_PVPANIC=y +CONFIG_PVPANIC_MMIO=m +CONFIG_PVPANIC_PCI=m +# end of Misc devices + CONFIG_HAVE_IDE=y # CONFIG_IDE is not set @@ -1980,7 +2602,6 @@ CONFIG_RAID_ATTRS=y CONFIG_SCSI=y CONFIG_SCSI_DMA=y CONFIG_SCSI_NETLINK=y -# CONFIG_SCSI_MQ_DEFAULT is not set CONFIG_SCSI_PROC_FS=y # @@ -1988,9 +2609,7 @@ CONFIG_SCSI_PROC_FS=y # CONFIG_BLK_DEV_SD=y CONFIG_CHR_DEV_ST=m -CONFIG_CHR_DEV_OSST=m CONFIG_BLK_DEV_SR=y -CONFIG_BLK_DEV_SR_VENDOR=y CONFIG_CHR_DEV_SG=m CONFIG_CHR_DEV_SCH=m CONFIG_SCSI_ENCLOSURE=m @@ -2009,6 +2628,8 @@ CONFIG_SCSI_SAS_LIBSAS=y CONFIG_SCSI_SAS_ATA=y CONFIG_SCSI_SAS_HOST_SMP=y CONFIG_SCSI_SRP_ATTRS=m +# end of SCSI Transports + CONFIG_SCSI_LOWLEVEL=y CONFIG_ISCSI_TCP=m CONFIG_ISCSI_BOOT_SYSFS=y @@ -2054,12 +2675,20 @@ CONFIG_SCSI_MPT3SAS=m CONFIG_SCSI_MPT2SAS_MAX_SGE=128 CONFIG_SCSI_MPT3SAS_MAX_SGE=128 CONFIG_SCSI_MPT2SAS=m +CONFIG_SCSI_SMARTPQI=m CONFIG_SCSI_UFSHCD=m CONFIG_SCSI_UFSHCD_PCI=m +# CONFIG_SCSI_UFS_DWC_TC_PCI is not set CONFIG_SCSI_UFSHCD_PLATFORM=m +CONFIG_SCSI_UFS_CDNS_PLATFORM=m +# CONFIG_SCSI_UFS_DWC_TC_PLATFORM is not set +# CONFIG_SCSI_UFS_BSG is not set +CONFIG_SCSI_UFS_CRYPTO=y CONFIG_SCSI_HPTIOP=m CONFIG_SCSI_BUSLOGIC=m CONFIG_SCSI_FLASHPOINT=y +CONFIG_SCSI_MYRB=m +CONFIG_SCSI_MYRS=m CONFIG_VMWARE_PVSCSI=m # CONFIG_XEN_SCSI_FRONTEND is not set CONFIG_HYPERV_STORAGE=m @@ -2070,12 +2699,8 @@ CONFIG_FCOE_FNIC=m CONFIG_SCSI_SNIC=m # CONFIG_SCSI_SNIC_DEBUG_FS is not set CONFIG_SCSI_DMX3191D=m -CONFIG_SCSI_EATA=m -# CONFIG_SCSI_EATA_TAGGED_QUEUE is not set -# CONFIG_SCSI_EATA_LINKED_COMMANDS is not set -CONFIG_SCSI_EATA_MAX_TAGS=16 -CONFIG_SCSI_FUTURE_DOMAIN=m -CONFIG_SCSI_GDTH=m +CONFIG_SCSI_FDOMAIN=m +CONFIG_SCSI_FDOMAIN_PCI=m CONFIG_SCSI_ISCI=m CONFIG_SCSI_IPS=m CONFIG_SCSI_INITIO=m @@ -2096,7 +2721,10 @@ CONFIG_SCSI_IPR=m CONFIG_SCSI_QLOGIC_1280=m CONFIG_SCSI_QLA_FC=m CONFIG_TCM_QLA2XXX=m +# CONFIG_TCM_QLA2XXX_DEBUG is not set CONFIG_SCSI_QLA_ISCSI=m +CONFIG_QEDI=m +CONFIG_QEDF=m CONFIG_SCSI_LPFC=m # CONFIG_SCSI_LPFC_DEBUG_FS is not set CONFIG_SCSI_DC395x=m @@ -2110,7 +2738,7 @@ CONFIG_SCSI_VIRTIO=m CONFIG_SCSI_CHELSIO_FCOE=m CONFIG_SCSI_LOWLEVEL_PCMCIA=y CONFIG_PCMCIA_AHA152X=m -CONFIG_PCMCIA_FDOMAIN=m +# CONFIG_PCMCIA_FDOMAIN is not set CONFIG_PCMCIA_QLOGIC=m CONFIG_PCMCIA_SYM53C500=m CONFIG_SCSI_DH=y @@ -2118,13 +2746,13 @@ CONFIG_SCSI_DH_RDAC=m CONFIG_SCSI_DH_HP_SW=m CONFIG_SCSI_DH_EMC=m CONFIG_SCSI_DH_ALUA=m -CONFIG_SCSI_OSD_INITIATOR=m -CONFIG_SCSI_OSD_ULD=m -CONFIG_SCSI_OSD_DPRINT_SENSE=1 -# CONFIG_SCSI_OSD_DEBUG is not set +# end of SCSI device support + CONFIG_ATA=y -# CONFIG_ATA_NONSTANDARD is not set +CONFIG_SATA_HOST=y +CONFIG_PATA_TIMINGS=y CONFIG_ATA_VERBOSE_ERROR=y +CONFIG_ATA_FORCE=y CONFIG_ATA_ACPI=y # CONFIG_SATA_ZPODD is not set CONFIG_SATA_PMP=y @@ -2133,6 +2761,7 @@ CONFIG_SATA_PMP=y # Controllers with non-SFF native interface # CONFIG_SATA_AHCI=y +CONFIG_SATA_MOBILE_LPM_POLICY=3 CONFIG_SATA_AHCI_PLATFORM=y CONFIG_SATA_INIC162X=y CONFIG_SATA_ACARD_AHCI=y @@ -2151,6 +2780,7 @@ CONFIG_ATA_BMDMA=y # SATA SFF controllers with BMDMA # CONFIG_ATA_PIIX=y +# CONFIG_SATA_DWC is not set CONFIG_SATA_MV=y CONFIG_SATA_NV=y CONFIG_SATA_PROMISE=y @@ -2230,22 +2860,25 @@ CONFIG_MD_CLUSTER=m CONFIG_BCACHE=m # CONFIG_BCACHE_DEBUG is not set # CONFIG_BCACHE_CLOSURES_DEBUG is not set +# CONFIG_BCACHE_ASYNC_REGISTRATION is not set CONFIG_BLK_DEV_DM_BUILTIN=y CONFIG_BLK_DEV_DM=y -# CONFIG_DM_MQ_DEFAULT is not set # CONFIG_DM_DEBUG is not set CONFIG_DM_BUFIO=m +CONFIG_DM_DEBUG_BLOCK_MANAGER_LOCKING=y +# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set CONFIG_DM_BIO_PRISON=m CONFIG_DM_PERSISTENT_DATA=m -# CONFIG_DM_DEBUG_BLOCK_STACK_TRACING is not set +CONFIG_DM_UNSTRIPED=m CONFIG_DM_CRYPT=y CONFIG_DM_SNAPSHOT=m CONFIG_DM_THIN_PROVISIONING=m CONFIG_DM_CACHE=m -CONFIG_DM_CACHE_MQ=m CONFIG_DM_CACHE_SMQ=m -CONFIG_DM_CACHE_CLEANER=m +# CONFIG_DM_WRITECACHE is not set +CONFIG_DM_EBS=m CONFIG_DM_ERA=m +# CONFIG_DM_CLONE is not set CONFIG_DM_MIRROR=y CONFIG_DM_LOG_USERSPACE=m CONFIG_DM_RAID=m @@ -2253,12 +2886,20 @@ CONFIG_DM_ZERO=m CONFIG_DM_MULTIPATH=m CONFIG_DM_MULTIPATH_QL=m CONFIG_DM_MULTIPATH_ST=m +CONFIG_DM_MULTIPATH_HST=m +CONFIG_DM_MULTIPATH_IOA=m # CONFIG_DM_DELAY is not set +CONFIG_DM_DUST=m +CONFIG_DM_INIT=y CONFIG_DM_UEVENT=y CONFIG_DM_FLAKEY=m CONFIG_DM_VERITY=m +# CONFIG_DM_VERITY_VERIFY_ROOTHASH_SIG is not set +CONFIG_DM_VERITY_FEC=y CONFIG_DM_SWITCH=m CONFIG_DM_LOG_WRITES=m +CONFIG_DM_INTEGRITY=m +CONFIG_DM_ZONED=m CONFIG_TARGET_CORE=m CONFIG_TCM_IBLOCK=m CONFIG_TCM_FILEIO=m @@ -2267,6 +2908,7 @@ CONFIG_TCM_USER2=m CONFIG_LOOPBACK_TARGET=m CONFIG_TCM_FC=m CONFIG_ISCSI_TARGET=m +CONFIG_ISCSI_TARGET_CXGB4=m CONFIG_SBP_TARGET=m CONFIG_FUSION=y CONFIG_FUSION_SPI=m @@ -2285,6 +2927,8 @@ CONFIG_FIREWIRE_OHCI=m CONFIG_FIREWIRE_SBP2=m CONFIG_FIREWIRE_NET=m CONFIG_FIREWIRE_NOSY=m +# end of IEEE 1394 (FireWire) support + CONFIG_MACINTOSH_DRIVERS=y CONFIG_MAC_EMUMOUSEBTN=y CONFIG_NETDEVICES=y @@ -2292,6 +2936,8 @@ CONFIG_MII=m CONFIG_NET_CORE=y CONFIG_BONDING=m CONFIG_DUMMY=m +CONFIG_WIREGUARD=m +# CONFIG_WIREGUARD_DEBUG is not set CONFIG_EQUALIZER=m CONFIG_NET_FC=y CONFIG_IFB=m @@ -2303,19 +2949,28 @@ CONFIG_NET_TEAM_MODE_ACTIVEBACKUP=m CONFIG_NET_TEAM_MODE_LOADBALANCE=m CONFIG_MACVLAN=m CONFIG_MACVTAP=m +CONFIG_IPVLAN_L3S=y CONFIG_IPVLAN=m +CONFIG_IPVTAP=m CONFIG_VXLAN=m CONFIG_GENEVE=m +CONFIG_BAREUDP=m +CONFIG_GTP=m +CONFIG_MACSEC=m CONFIG_NETCONSOLE=m CONFIG_NETCONSOLE_DYNAMIC=y CONFIG_NETPOLL=y CONFIG_NET_POLL_CONTROLLER=y CONFIG_NTB_NETDEV=m CONFIG_TUN=m +CONFIG_TAP=m # CONFIG_TUN_VNET_CROSS_LE is not set CONFIG_VETH=m CONFIG_VIRTIO_NET=m CONFIG_NLMON=m +CONFIG_NET_VRF=m +CONFIG_VSOCKMON=m +CONFIG_MHI_NET=m CONFIG_SUNGEM_PHY=m CONFIG_ARCNET=m CONFIG_ARCNET_1201=m @@ -2360,25 +3015,42 @@ CONFIG_ATM_HE=m CONFIG_ATM_SOLOS=m # -# CAIF transport drivers -# -CONFIG_VHOST_NET=m -CONFIG_VHOST_SCSI=m -CONFIG_VHOST_RING=m -CONFIG_VHOST=m -# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set - -# # Distributed Switch Architecture drivers # -CONFIG_NET_DSA_MV88E6XXX=m -CONFIG_NET_DSA_MV88E6060=m -CONFIG_NET_DSA_MV88E6XXX_NEED_PPU=y -CONFIG_NET_DSA_MV88E6131=m -CONFIG_NET_DSA_MV88E6123_61_65=m -CONFIG_NET_DSA_MV88E6171=m -CONFIG_NET_DSA_MV88E6352=m +CONFIG_B53=m +# CONFIG_B53_SPI_DRIVER is not set +CONFIG_B53_MDIO_DRIVER=m +CONFIG_B53_MMAP_DRIVER=m +CONFIG_B53_SRAB_DRIVER=m +CONFIG_B53_SERDES=m CONFIG_NET_DSA_BCM_SF2=m +CONFIG_NET_DSA_LOOP=m +CONFIG_NET_DSA_HIRSCHMANN_HELLCREEK=m +# CONFIG_NET_DSA_LANTIQ_GSWIP is not set +CONFIG_NET_DSA_MT7530=m +# CONFIG_NET_DSA_MV88E6060 is not set +CONFIG_NET_DSA_MICROCHIP_KSZ_COMMON=m +CONFIG_NET_DSA_MICROCHIP_KSZ9477=m +CONFIG_NET_DSA_MICROCHIP_KSZ9477_I2C=m +# CONFIG_NET_DSA_MICROCHIP_KSZ9477_SPI is not set +# CONFIG_NET_DSA_MICROCHIP_KSZ8795 is not set +CONFIG_NET_DSA_MV88E6XXX=m +CONFIG_NET_DSA_MV88E6XXX_PTP=y +CONFIG_NET_DSA_AR9331=m +# CONFIG_NET_DSA_SJA1105 is not set +CONFIG_NET_DSA_XRS700X=m +CONFIG_NET_DSA_XRS700X_I2C=m +CONFIG_NET_DSA_XRS700X_MDIO=m +CONFIG_NET_DSA_QCA8K=m +CONFIG_NET_DSA_REALTEK_SMI=m +CONFIG_NET_DSA_SMSC_LAN9303=m +CONFIG_NET_DSA_SMSC_LAN9303_I2C=m +CONFIG_NET_DSA_SMSC_LAN9303_MDIO=m +CONFIG_NET_DSA_VITESSE_VSC73XX=m +CONFIG_NET_DSA_VITESSE_VSC73XX_SPI=m +CONFIG_NET_DSA_VITESSE_VSC73XX_PLATFORM=m +# end of Distributed Switch Architecture drivers + CONFIG_ETHERNET=y CONFIG_MDIO=m CONFIG_NET_VENDOR_3COM=y @@ -2390,14 +3062,22 @@ CONFIG_NET_VENDOR_ADAPTEC=y CONFIG_ADAPTEC_STARFIRE=m CONFIG_NET_VENDOR_AGERE=y # CONFIG_ET131X is not set +CONFIG_NET_VENDOR_ALACRITECH=y +# CONFIG_SLICOSS is not set CONFIG_NET_VENDOR_ALTEON=y CONFIG_ACENIC=m # CONFIG_ACENIC_OMIT_TIGON_I is not set CONFIG_ALTERA_TSE=m +CONFIG_NET_VENDOR_AMAZON=y +CONFIG_ENA_ETHERNET=m CONFIG_NET_VENDOR_AMD=y CONFIG_AMD8111_ETH=m CONFIG_PCNET32=m CONFIG_PCMCIA_NMCLAN=m +CONFIG_AMD_XGBE=m +CONFIG_AMD_XGBE_HAVE_ECC=y +CONFIG_NET_VENDOR_AQUANTIA=y +CONFIG_AQTION=m CONFIG_NET_VENDOR_ARC=y CONFIG_NET_VENDOR_ATHEROS=y CONFIG_ATL2=m @@ -2405,10 +3085,6 @@ CONFIG_ATL1=m CONFIG_ATL1E=m CONFIG_ATL1C=m CONFIG_ALX=m -CONFIG_NET_VENDOR_AURORA=y -CONFIG_AURORA_NB8800=m -CONFIG_NET_CADENCE=y -CONFIG_MACB=m CONFIG_NET_VENDOR_BROADCOM=y CONFIG_B44=m CONFIG_B44_PCI_AUTOSELECT=y @@ -2418,26 +3094,40 @@ CONFIG_BCMGENET=m CONFIG_BNX2=m CONFIG_CNIC=m CONFIG_TIGON3=m +CONFIG_TIGON3_HWMON=y CONFIG_BNX2X=m CONFIG_BNX2X_SRIOV=y -CONFIG_BNX2X_VXLAN=y +# CONFIG_SYSTEMPORT is not set CONFIG_BNXT=m CONFIG_BNXT_SRIOV=y +CONFIG_BNXT_FLOWER_OFFLOAD=y +CONFIG_BNXT_HWMON=y CONFIG_NET_VENDOR_BROCADE=y CONFIG_BNA=m +CONFIG_NET_VENDOR_CADENCE=y +CONFIG_MACB=m +CONFIG_MACB_USE_HWSTAMP=y +CONFIG_MACB_PCI=m CONFIG_NET_VENDOR_CAVIUM=y CONFIG_THUNDER_NIC_PF=m CONFIG_THUNDER_NIC_VF=m CONFIG_THUNDER_NIC_BGX=m +CONFIG_THUNDER_NIC_RGX=m +CONFIG_CAVIUM_PTP=m CONFIG_LIQUIDIO=m +CONFIG_LIQUIDIO_VF=m CONFIG_NET_VENDOR_CHELSIO=y CONFIG_CHELSIO_T1=m CONFIG_CHELSIO_T1_1G=y CONFIG_CHELSIO_T3=m CONFIG_CHELSIO_T4=m CONFIG_CHELSIO_T4VF=m +CONFIG_CHELSIO_LIB=m +CONFIG_CHELSIO_INLINE_CRYPTO=y +CONFIG_CHELSIO_IPSEC_INLINE=m CONFIG_NET_VENDOR_CISCO=y CONFIG_ENIC=m +# CONFIG_NET_VENDOR_CORTINA is not set CONFIG_CX_ECAT=m CONFIG_DNET=m CONFIG_NET_VENDOR_DEC=y @@ -2460,36 +3150,41 @@ CONFIG_SUNDANCE=m CONFIG_NET_VENDOR_EMULEX=y CONFIG_BE2NET=m CONFIG_BE2NET_HWMON=y -CONFIG_BE2NET_VXLAN=y +CONFIG_BE2NET_BE2=y +CONFIG_BE2NET_BE3=y +CONFIG_BE2NET_LANCER=y +CONFIG_BE2NET_SKYHAWK=y CONFIG_NET_VENDOR_EZCHIP=y -CONFIG_NET_VENDOR_EXAR=y -CONFIG_S2IO=m -CONFIG_VXGE=m -# CONFIG_VXGE_DEBUG_TRACE_ALL is not set CONFIG_NET_VENDOR_FUJITSU=y CONFIG_PCMCIA_FMVJ18X=m -CONFIG_NET_VENDOR_HP=y -CONFIG_HP100=m +CONFIG_NET_VENDOR_GOOGLE=y +CONFIG_GVE=m +# CONFIG_NET_VENDOR_HUAWEI is not set +CONFIG_NET_VENDOR_I825XX=y CONFIG_NET_VENDOR_INTEL=y CONFIG_E100=m CONFIG_E1000=m CONFIG_E1000E=m +CONFIG_E1000E_HWTS=y CONFIG_IGB=m CONFIG_IGB_HWMON=y CONFIG_IGB_DCA=y CONFIG_IGBVF=m CONFIG_IXGB=m CONFIG_IXGBE=m -CONFIG_IXGBE_VXLAN=y CONFIG_IXGBE_HWMON=y CONFIG_IXGBE_DCA=y +CONFIG_IXGBE_IPSEC=y CONFIG_IXGBEVF=m +CONFIG_IXGBEVF_IPSEC=y CONFIG_I40E=m -# CONFIG_I40E_VXLAN is not set +CONFIG_IAVF=m CONFIG_I40EVF=m +CONFIG_ICE=m CONFIG_FM10K=m -CONFIG_FM10K_VXLAN=y -CONFIG_NET_VENDOR_I825XX=y +CONFIG_IGC=m +CONFIG_NET_VENDOR_MICROSOFT=y +CONFIG_MICROSOFT_MANA=m CONFIG_JME=m CONFIG_NET_VENDOR_MARVELL=y CONFIG_MVMDIO=m @@ -2498,21 +3193,47 @@ CONFIG_SKGE=m CONFIG_SKGE_GENESIS=y CONFIG_SKY2=m # CONFIG_SKY2_DEBUG is not set +CONFIG_PRESTERA=m +CONFIG_PRESTERA_PCI=m CONFIG_NET_VENDOR_MELLANOX=y CONFIG_MLX4_EN=m -CONFIG_MLX4_EN_VXLAN=y CONFIG_MLX4_CORE=m CONFIG_MLX4_DEBUG=y +CONFIG_MLX4_CORE_GEN2=y CONFIG_MLX5_CORE=m +CONFIG_MLX5_ACCEL=y +# CONFIG_MLX5_FPGA is not set CONFIG_MLX5_CORE_EN=y +CONFIG_MLX5_EN_ARFS=y +CONFIG_MLX5_EN_RXNFC=y +CONFIG_MLX5_MPFS=y +CONFIG_MLX5_ESWITCH=y +CONFIG_MLX5_CLS_ACT=y +CONFIG_MLX5_TC_CT=y +CONFIG_MLX5_TC_SAMPLE=y +CONFIG_MLX5_CORE_IPOIB=y +CONFIG_MLX5_IPSEC=y +CONFIG_MLX5_EN_IPSEC=y +CONFIG_MLX5_SW_STEERING=y +CONFIG_MLX5_SF=y +CONFIG_MLX5_SF_MANAGER=y CONFIG_MLXSW_CORE=m +CONFIG_MLXSW_CORE_HWMON=y +CONFIG_MLXSW_CORE_THERMAL=y CONFIG_MLXSW_PCI=m +CONFIG_MLXSW_I2C=m +CONFIG_MLXSW_SWITCHIB=m CONFIG_MLXSW_SWITCHX2=m CONFIG_MLXSW_SPECTRUM=m +CONFIG_MLXSW_MINIMAL=m +CONFIG_MLXFW=m CONFIG_NET_VENDOR_MICREL=y CONFIG_KS8842=m +# CONFIG_KS8851 is not set CONFIG_KS8851_MLL=m CONFIG_KSZ884X_PCI=m +# CONFIG_NET_VENDOR_MICROCHIP is not set +# CONFIG_NET_VENDOR_MICROSEMI is not set CONFIG_NET_VENDOR_MYRI=y CONFIG_MYRI10GE=m CONFIG_MYRI10GE_DCA=y @@ -2520,6 +3241,16 @@ CONFIG_FEALNX=m CONFIG_NET_VENDOR_NATSEMI=y CONFIG_NATSEMI=m CONFIG_NS83820=m +CONFIG_NET_VENDOR_NETERION=y +CONFIG_S2IO=m +CONFIG_VXGE=m +# CONFIG_VXGE_DEBUG_TRACE_ALL is not set +CONFIG_NET_VENDOR_NETRONOME=y +CONFIG_NFP=m +CONFIG_NFP_APP_FLOWER=y +CONFIG_NFP_APP_ABM_NIC=y +# CONFIG_NFP_DEBUG is not set +# CONFIG_NET_VENDOR_NI is not set CONFIG_NET_VENDOR_8390=y CONFIG_PCMCIA_AXNET=m CONFIG_NE2K_PCI=m @@ -2528,20 +3259,30 @@ CONFIG_NET_VENDOR_NVIDIA=y CONFIG_FORCEDETH=m CONFIG_NET_VENDOR_OKI=y CONFIG_ETHOC=m -CONFIG_NET_PACKET_ENGINE=y +CONFIG_NET_VENDOR_PACKET_ENGINES=y CONFIG_HAMACHI=m CONFIG_YELLOWFIN=m +CONFIG_NET_VENDOR_PENSANDO=y +# CONFIG_IONIC is not set CONFIG_NET_VENDOR_QLOGIC=y CONFIG_QLA3XXX=m CONFIG_QLCNIC=m CONFIG_QLCNIC_SRIOV=y -CONFIG_QLCNIC_VXLAN=y CONFIG_QLCNIC_HWMON=y -CONFIG_QLGE=m CONFIG_NETXEN_NIC=m CONFIG_QED=m +CONFIG_QED_LL2=y +CONFIG_QED_SRIOV=y CONFIG_QEDE=m +CONFIG_QED_RDMA=y +CONFIG_QED_ISCSI=y +CONFIG_QED_FCOE=y +CONFIG_QED_OOO=y CONFIG_NET_VENDOR_QUALCOMM=y +# CONFIG_QCOM_EMAC is not set +# CONFIG_RMNET is not set +CONFIG_NET_VENDOR_RDC=y +CONFIG_R6040=m CONFIG_NET_VENDOR_REALTEK=y CONFIG_ATP=m CONFIG_8139CP=m @@ -2552,33 +3293,36 @@ CONFIG_8139TOO_8129=y # CONFIG_8139_OLD_RX_RESET is not set CONFIG_R8169=m CONFIG_NET_VENDOR_RENESAS=y -CONFIG_NET_VENDOR_RDC=y -CONFIG_R6040=m CONFIG_NET_VENDOR_ROCKER=y CONFIG_ROCKER=m CONFIG_NET_VENDOR_SAMSUNG=y CONFIG_SXGBE_ETH=m CONFIG_NET_VENDOR_SEEQ=y -CONFIG_NET_VENDOR_SILAN=y -CONFIG_SC92031=m -CONFIG_NET_VENDOR_SIS=y -CONFIG_SIS900=m -CONFIG_SIS190=m +CONFIG_NET_VENDOR_SOLARFLARE=y CONFIG_SFC=m CONFIG_SFC_MTD=y CONFIG_SFC_MCDI_MON=y CONFIG_SFC_SRIOV=y # CONFIG_SFC_MCDI_LOGGING is not set +CONFIG_SFC_FALCON=m +CONFIG_SFC_FALCON_MTD=y +CONFIG_NET_VENDOR_SILAN=y +CONFIG_SC92031=m +CONFIG_NET_VENDOR_SIS=y +CONFIG_SIS900=m +CONFIG_SIS190=m CONFIG_NET_VENDOR_SMSC=y CONFIG_PCMCIA_SMC91C92=m CONFIG_EPIC100=m CONFIG_SMSC911X=m -# CONFIG_SMSC911X_ARCH_HOOKS is not set CONFIG_SMSC9420=m +# CONFIG_NET_VENDOR_SOCIONEXT is not set CONFIG_NET_VENDOR_STMICRO=y CONFIG_STMMAC_ETH=m +# CONFIG_STMMAC_SELFTESTS is not set CONFIG_STMMAC_PLATFORM=m CONFIG_DWMAC_GENERIC=m +CONFIG_DWMAC_INTEL=m # CONFIG_STMMAC_PCI is not set CONFIG_NET_VENDOR_SUN=y CONFIG_HAPPYMEAL=m @@ -2586,10 +3330,12 @@ CONFIG_SUNGEM=m CONFIG_CASSINI=m CONFIG_NIU=m CONFIG_NET_VENDOR_SYNOPSYS=y +CONFIG_DWC_XLGMAC=m +CONFIG_DWC_XLGMAC_PCI=m CONFIG_NET_VENDOR_TEHUTI=y CONFIG_TEHUTI=m CONFIG_NET_VENDOR_TI=y -CONFIG_TI_CPSW_ALE=m +# CONFIG_TI_CPSW_PHY_SEL is not set CONFIG_TLAN=m CONFIG_NET_VENDOR_VIA=y CONFIG_VIA_RHINE=m @@ -2601,50 +3347,95 @@ CONFIG_WIZNET_W5300=m # CONFIG_WIZNET_BUS_DIRECT is not set # CONFIG_WIZNET_BUS_INDIRECT is not set CONFIG_WIZNET_BUS_ANY=y +# CONFIG_WIZNET_W5100_SPI is not set +CONFIG_NET_VENDOR_XILINX=y +CONFIG_XILINX_EMACLITE=m +# CONFIG_XILINX_AXI_EMAC is not set +CONFIG_XILINX_LL_TEMAC=m CONFIG_NET_VENDOR_XIRCOM=y CONFIG_PCMCIA_XIRC2PS=m CONFIG_FDDI=y CONFIG_DEFXX=m -# CONFIG_DEFXX_MMIO is not set CONFIG_SKFP=m CONFIG_HIPPI=y CONFIG_ROADRUNNER=m # CONFIG_ROADRUNNER_LARGE_RINGS is not set CONFIG_NET_SB1000=m +CONFIG_PHYLINK=m CONFIG_PHYLIB=m +CONFIG_SWPHY=y +CONFIG_LED_TRIGGER_PHY=y +CONFIG_FIXED_PHY=m +CONFIG_SFP=m # # MII PHY device drivers # -CONFIG_AQUANTIA_PHY=m -CONFIG_AT803X_PHY=m CONFIG_AMD_PHY=m -CONFIG_MARVELL_PHY=m -CONFIG_DAVICOM_PHY=m -CONFIG_QSEMI_PHY=m -CONFIG_LXT_PHY=m -CONFIG_CICADA_PHY=m -CONFIG_VITESSE_PHY=m -CONFIG_TERANETICS_PHY=m -CONFIG_SMSC_PHY=m -CONFIG_BCM_NET_PHYLIB=m +CONFIG_ADIN_PHY=m +CONFIG_AQUANTIA_PHY=m +CONFIG_AX88796B_PHY=m CONFIG_BROADCOM_PHY=m +CONFIG_BCM54140_PHY=m CONFIG_BCM7XXX_PHY=m +CONFIG_BCM84881_PHY=m CONFIG_BCM87XX_PHY=m +CONFIG_BCM_NET_PHYLIB=m +CONFIG_CICADA_PHY=m +CONFIG_CORTINA_PHY=m +CONFIG_DAVICOM_PHY=m CONFIG_ICPLUS_PHY=m -CONFIG_REALTEK_PHY=m -CONFIG_NATIONAL_PHY=m -CONFIG_STE10XP=m +CONFIG_LXT_PHY=m +CONFIG_INTEL_XWAY_PHY=m CONFIG_LSI_ET1011C_PHY=m +CONFIG_MARVELL_PHY=m +CONFIG_MARVELL_10G_PHY=m +CONFIG_MARVELL_88X2222_PHY=m CONFIG_MICREL_PHY=m +CONFIG_MICROCHIP_PHY=m +# CONFIG_MICROCHIP_T1_PHY is not set +CONFIG_MICROSEMI_PHY=m +CONFIG_NATIONAL_PHY=m +CONFIG_NXP_C45_TJA11XX_PHY=m +# CONFIG_NXP_TJA11XX_PHY is not set +CONFIG_AT803X_PHY=m +CONFIG_QSEMI_PHY=m +CONFIG_REALTEK_PHY=m +CONFIG_RENESAS_PHY=m +CONFIG_ROCKCHIP_PHY=m +CONFIG_SMSC_PHY=m +CONFIG_STE10XP=m +CONFIG_TERANETICS_PHY=m +CONFIG_DP83822_PHY=m +# CONFIG_DP83TC811_PHY is not set CONFIG_DP83848_PHY=m CONFIG_DP83867_PHY=m -CONFIG_MICROCHIP_PHY=m -CONFIG_FIXED_PHY=m +CONFIG_DP83869_PHY=m +CONFIG_VITESSE_PHY=m +CONFIG_XILINX_GMII2RGMII=m +# CONFIG_MICREL_KS8995MA is not set +CONFIG_MDIO_DEVICE=m +CONFIG_MDIO_BUS=m +CONFIG_MDIO_DEVRES=m CONFIG_MDIO_BITBANG=m -CONFIG_MDIO_GPIO=m -CONFIG_MDIO_OCTEON=m CONFIG_MDIO_BCM_UNIMAC=m +CONFIG_MDIO_CAVIUM=m +CONFIG_MDIO_GPIO=m +CONFIG_MDIO_I2C=m +CONFIG_MDIO_MVUSB=m +# CONFIG_MDIO_MSCC_MIIM is not set +CONFIG_MDIO_THUNDER=m + +# +# MDIO Multiplexers +# + +# +# PCS device drivers +# +CONFIG_PCS_XPCS=m +# end of PCS device drivers + CONFIG_PLIP=m CONFIG_PPP=m CONFIG_PPP_BSDCOMP=m @@ -2706,29 +3497,13 @@ CONFIG_USB_IPHETH=m CONFIG_USB_SIERRA_NET=m CONFIG_USB_VL600=m CONFIG_USB_NET_CH9200=m +CONFIG_USB_NET_AQC111=m +CONFIG_USB_RTL8153_ECM=m CONFIG_WLAN=y -CONFIG_PCMCIA_RAYCS=m -CONFIG_LIBERTAS_THINFIRM=m -# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set -CONFIG_LIBERTAS_THINFIRM_USB=m -CONFIG_AIRO=m -CONFIG_ATMEL=m -CONFIG_PCI_ATMEL=m -CONFIG_PCMCIA_ATMEL=m -CONFIG_AT76C50X_USB=m -CONFIG_AIRO_CS=m -CONFIG_PCMCIA_WL3501=m -CONFIG_PRISM54=m -CONFIG_USB_ZD1201=m -CONFIG_USB_NET_RNDIS_WLAN=m +CONFIG_WLAN_VENDOR_ADMTEK=y CONFIG_ADM8211=m -CONFIG_RTL8180=m -CONFIG_RTL8187=m -CONFIG_RTL8187_LEDS=y -# CONFIG_MAC80211_HWSIM is not set -CONFIG_MWL8K=m CONFIG_ATH_COMMON=m -CONFIG_ATH_CARDS=m +CONFIG_WLAN_VENDOR_ATH=y # CONFIG_ATH_DEBUG is not set CONFIG_ATH5K=m # CONFIG_ATH5K_DEBUG is not set @@ -2746,8 +3521,10 @@ CONFIG_ATH9K_WOW=y CONFIG_ATH9K_RFKILL=y CONFIG_ATH9K_CHANNEL_CONTEXT=y CONFIG_ATH9K_PCOEM=y +CONFIG_ATH9K_PCI_NO_EEPROM=m CONFIG_ATH9K_HTC=m # CONFIG_ATH9K_HTC_DEBUGFS is not set +# CONFIG_ATH9K_HWRNG is not set CONFIG_CARL9170=m CONFIG_CARL9170_LEDS=y CONFIG_CARL9170_WPC=y @@ -2761,13 +3538,29 @@ CONFIG_AR5523=m CONFIG_WIL6210=m CONFIG_WIL6210_ISR_COR=y # CONFIG_WIL6210_TRACING is not set +CONFIG_WIL6210_DEBUGFS=y CONFIG_ATH10K=m +CONFIG_ATH10K_CE=y CONFIG_ATH10K_PCI=m +CONFIG_ATH10K_SDIO=m +CONFIG_ATH10K_USB=m # CONFIG_ATH10K_DEBUG is not set CONFIG_ATH10K_DEBUGFS=y +# CONFIG_ATH10K_SPECTRAL is not set # CONFIG_ATH10K_TRACING is not set CONFIG_WCN36XX=m CONFIG_WCN36XX_DEBUGFS=y +CONFIG_ATH11K=m +CONFIG_ATH11K_AHB=m +CONFIG_ATH11K_PCI=m +# CONFIG_ATH11K_DEBUG is not set +# CONFIG_ATH11K_TRACING is not set +CONFIG_WLAN_VENDOR_ATMEL=y +CONFIG_ATMEL=m +CONFIG_PCI_ATMEL=m +CONFIG_PCMCIA_ATMEL=m +CONFIG_AT76C50X_USB=m +CONFIG_WLAN_VENDOR_BROADCOM=y CONFIG_B43=m CONFIG_B43_BCMA=y CONFIG_B43_SSB=y @@ -2807,12 +3600,10 @@ CONFIG_BRCMFMAC_USB=y CONFIG_BRCMFMAC_PCIE=y CONFIG_BRCM_TRACING=y # CONFIG_BRCMDBG is not set -CONFIG_HOSTAP=m -CONFIG_HOSTAP_FIRMWARE=y -CONFIG_HOSTAP_FIRMWARE_NVRAM=y -CONFIG_HOSTAP_PLX=m -CONFIG_HOSTAP_PCI=m -CONFIG_HOSTAP_CS=m +CONFIG_WLAN_VENDOR_CISCO=y +CONFIG_AIRO=m +CONFIG_AIRO_CS=m +CONFIG_WLAN_VENDOR_INTEL=y CONFIG_IPW2100=m CONFIG_IPW2100_MONITOR=y # CONFIG_IPW2100_DEBUG is not set @@ -2824,33 +3615,37 @@ CONFIG_IPW2200_QOS=y # CONFIG_IPW2200_DEBUG is not set CONFIG_LIBIPW=m # CONFIG_LIBIPW_DEBUG is not set +CONFIG_IWLEGACY=m +CONFIG_IWL4965=m +CONFIG_IWL3945=m + +# +# iwl3945 / iwl4965 Debugging Options +# +# CONFIG_IWLEGACY_DEBUG is not set +# end of iwl3945 / iwl4965 Debugging Options + CONFIG_IWLWIFI=m CONFIG_IWLWIFI_LEDS=y CONFIG_IWLDVM=m CONFIG_IWLMVM=m CONFIG_IWLWIFI_OPMODE_MODULAR=y # CONFIG_IWLWIFI_BCAST_FILTERING is not set -# CONFIG_IWLWIFI_UAPSD is not set # # Debugging Options # # CONFIG_IWLWIFI_DEBUG is not set # CONFIG_IWLWIFI_DEVICE_TRACING is not set -CONFIG_IWLEGACY=m -CONFIG_IWL4965=m -CONFIG_IWL3945=m +# end of Debugging Options -# -# iwl3945 / iwl4965 Debugging Options -# -# CONFIG_IWLEGACY_DEBUG is not set -CONFIG_LIBERTAS=m -CONFIG_LIBERTAS_USB=m -CONFIG_LIBERTAS_CS=m -CONFIG_LIBERTAS_SDIO=m -# CONFIG_LIBERTAS_DEBUG is not set -CONFIG_LIBERTAS_MESH=y +CONFIG_WLAN_VENDOR_INTERSIL=y +CONFIG_HOSTAP=m +CONFIG_HOSTAP_FIRMWARE=y +CONFIG_HOSTAP_FIRMWARE_NVRAM=y +CONFIG_HOSTAP_PLX=m +CONFIG_HOSTAP_PCI=m +CONFIG_HOSTAP_CS=m CONFIG_HERMES=m # CONFIG_HERMES_PRISM is not set CONFIG_HERMES_CACHE_FW_ON_INIT=y @@ -2863,7 +3658,52 @@ CONFIG_ORINOCO_USB=m CONFIG_P54_COMMON=m CONFIG_P54_USB=m CONFIG_P54_PCI=m +# CONFIG_P54_SPI is not set CONFIG_P54_LEDS=y +CONFIG_PRISM54=m +CONFIG_WLAN_VENDOR_MARVELL=y +CONFIG_LIBERTAS=m +CONFIG_LIBERTAS_USB=m +CONFIG_LIBERTAS_CS=m +CONFIG_LIBERTAS_SDIO=m +# CONFIG_LIBERTAS_SPI is not set +# CONFIG_LIBERTAS_DEBUG is not set +CONFIG_LIBERTAS_MESH=y +CONFIG_LIBERTAS_THINFIRM=m +# CONFIG_LIBERTAS_THINFIRM_DEBUG is not set +CONFIG_LIBERTAS_THINFIRM_USB=m +CONFIG_MWIFIEX=m +CONFIG_MWIFIEX_SDIO=m +CONFIG_MWIFIEX_PCIE=m +CONFIG_MWIFIEX_USB=m +CONFIG_MWL8K=m +CONFIG_WLAN_VENDOR_MEDIATEK=y +CONFIG_MT7601U=m +CONFIG_MT76_CORE=m +CONFIG_MT76_LEDS=y +CONFIG_MT76_USB=m +CONFIG_MT76_SDIO=m +CONFIG_MT76x02_LIB=m +CONFIG_MT76x02_USB=m +CONFIG_MT76_CONNAC_LIB=m +CONFIG_MT76x0_COMMON=m +CONFIG_MT76x0U=m +CONFIG_MT76x0E=m +CONFIG_MT76x2_COMMON=m +CONFIG_MT76x2E=m +CONFIG_MT76x2U=m +CONFIG_MT7603E=m +CONFIG_MT7615_COMMON=m +CONFIG_MT7615E=m +CONFIG_MT7663_USB_SDIO_COMMON=m +CONFIG_MT7663U=m +CONFIG_MT7663S=m +CONFIG_MT7915E=m +CONFIG_MT7921E=m +CONFIG_WLAN_VENDOR_MICROCHIP=y +# CONFIG_WILC1000_SDIO is not set +# CONFIG_WILC1000_SPI is not set +CONFIG_WLAN_VENDOR_RALINK=y CONFIG_RT2X00=m CONFIG_RT2400PCI=m CONFIG_RT2500PCI=m @@ -2892,8 +3732,10 @@ CONFIG_RT2X00_LIB_FIRMWARE=y CONFIG_RT2X00_LIB_CRYPTO=y CONFIG_RT2X00_LIB_LEDS=y # CONFIG_RT2X00_DEBUG is not set -CONFIG_WL_MEDIATEK=y -CONFIG_MT7601U=m +CONFIG_WLAN_VENDOR_REALTEK=y +CONFIG_RTL8180=m +CONFIG_RTL8187=m +CONFIG_RTL8187_LEDS=y CONFIG_RTL_CARDS=m CONFIG_RTL8192CE=m CONFIG_RTL8192SE=m @@ -2913,33 +3755,50 @@ CONFIG_RTL8723_COMMON=m CONFIG_RTLBTCOEXIST=m CONFIG_RTL8XXXU=m CONFIG_RTL8XXXU_UNTESTED=y -CONFIG_WL_TI=y +CONFIG_RTW88=m +CONFIG_RTW88_CORE=m +CONFIG_RTW88_PCI=m +CONFIG_RTW88_8822B=m +CONFIG_RTW88_8822C=m +CONFIG_RTW88_8723D=m +CONFIG_RTW88_8821C=m +CONFIG_RTW88_8822BE=m +CONFIG_RTW88_8822CE=m +CONFIG_RTW88_8723DE=m +CONFIG_RTW88_8821CE=m +# CONFIG_RTW88_DEBUG is not set +# CONFIG_RTW88_DEBUGFS is not set +CONFIG_WLAN_VENDOR_RSI=y +CONFIG_RSI_91X=m +CONFIG_RSI_DEBUGFS=y +CONFIG_RSI_SDIO=m +CONFIG_RSI_USB=m +CONFIG_RSI_COEX=y +CONFIG_WLAN_VENDOR_ST=y +CONFIG_CW1200=m +CONFIG_CW1200_WLAN_SDIO=m +# CONFIG_CW1200_WLAN_SPI is not set +CONFIG_WLAN_VENDOR_TI=y CONFIG_WL1251=m +# CONFIG_WL1251_SPI is not set CONFIG_WL1251_SDIO=m CONFIG_WL12XX=m CONFIG_WL18XX=m CONFIG_WLCORE=m CONFIG_WLCORE_SDIO=m CONFIG_WILINK_PLATFORM_DATA=y +CONFIG_WLAN_VENDOR_ZYDAS=y +CONFIG_USB_ZD1201=m CONFIG_ZD1211RW=m # CONFIG_ZD1211RW_DEBUG is not set -CONFIG_MWIFIEX=m -CONFIG_MWIFIEX_SDIO=m -CONFIG_MWIFIEX_PCIE=m -CONFIG_MWIFIEX_USB=m -CONFIG_CW1200=m -CONFIG_CW1200_WLAN_SDIO=m -CONFIG_RSI_91X=m -CONFIG_RSI_DEBUGFS=y -CONFIG_RSI_SDIO=m -CONFIG_RSI_USB=m - -# -# WiMAX Wireless Broadband devices -# -CONFIG_WIMAX_I2400M=m -CONFIG_WIMAX_I2400M_USB=m -CONFIG_WIMAX_I2400M_DEBUG_LEVEL=8 +CONFIG_WLAN_VENDOR_QUANTENNA=y +CONFIG_QTNFMAC=m +CONFIG_QTNFMAC_PCIE=m +CONFIG_PCMCIA_RAYCS=m +CONFIG_PCMCIA_WL3501=m +# CONFIG_MAC80211_HWSIM is not set +CONFIG_USB_NET_RNDIS_WLAN=m +CONFIG_VIRT_WIFI=m CONFIG_WAN=y CONFIG_LANMEDIA=m CONFIG_HDLC=m @@ -2956,133 +3815,38 @@ CONFIG_PCI200SYN=m CONFIG_WANXL=m # CONFIG_PC300TOO is not set CONFIG_FARSYNC=m -CONFIG_DSCC4=m -# CONFIG_DSCC4_PCISYNC is not set -# CONFIG_DSCC4_PCI_RST is not set -CONFIG_DLCI=m -CONFIG_DLCI_MAX=8 CONFIG_SBNI=m # CONFIG_SBNI_MULTILINE is not set CONFIG_IEEE802154_DRIVERS=m CONFIG_IEEE802154_FAKELB=m +# CONFIG_IEEE802154_AT86RF230 is not set +# CONFIG_IEEE802154_MRF24J40 is not set +# CONFIG_IEEE802154_CC2520 is not set CONFIG_IEEE802154_ATUSB=m +# CONFIG_IEEE802154_ADF7242 is not set +# CONFIG_IEEE802154_CA8210 is not set +# CONFIG_IEEE802154_MCR20A is not set +# CONFIG_IEEE802154_HWSIM is not set + +# +# Wireless WAN +# +CONFIG_WWAN=y +CONFIG_MHI_WWAN_CTRL=m +# end of Wireless WAN + CONFIG_XEN_NETDEV_FRONTEND=y CONFIG_XEN_NETDEV_BACKEND=y CONFIG_VMXNET3=m CONFIG_FUJITSU_ES=m +CONFIG_USB4_NET=m CONFIG_HYPERV_NET=m +# CONFIG_NETDEVSIM is not set +CONFIG_NET_FAILOVER=m CONFIG_ISDN=y -CONFIG_ISDN_I4L=m -CONFIG_ISDN_PPP=y -CONFIG_ISDN_PPP_VJ=y -CONFIG_ISDN_MPP=y -CONFIG_IPPP_FILTER=y -CONFIG_ISDN_PPP_BSDCOMP=m -CONFIG_ISDN_AUDIO=y -CONFIG_ISDN_TTY_FAX=y - -# -# ISDN feature submodules -# -CONFIG_ISDN_DIVERSION=m - -# -# ISDN4Linux hardware drivers -# - -# -# Passive cards -# -CONFIG_ISDN_DRV_HISAX=m - -# -# D-channel protocol features -# -CONFIG_HISAX_EURO=y -CONFIG_DE_AOC=y -CONFIG_HISAX_NO_SENDCOMPLETE=y -CONFIG_HISAX_NO_LLC=y -CONFIG_HISAX_NO_KEYPAD=y -CONFIG_HISAX_1TR6=y -CONFIG_HISAX_NI1=y -CONFIG_HISAX_MAX_CARDS=8 - -# -# HiSax supported cards -# -CONFIG_HISAX_16_3=y -CONFIG_HISAX_TELESPCI=y -CONFIG_HISAX_S0BOX=y -CONFIG_HISAX_FRITZPCI=y -CONFIG_HISAX_AVM_A1_PCMCIA=y -CONFIG_HISAX_ELSA=y -CONFIG_HISAX_DIEHLDIVA=y -CONFIG_HISAX_SEDLBAUER=y -CONFIG_HISAX_NETJET=y -CONFIG_HISAX_NETJET_U=y -CONFIG_HISAX_NICCY=y -CONFIG_HISAX_BKM_A4T=y -CONFIG_HISAX_SCT_QUADRO=y -CONFIG_HISAX_GAZEL=y -CONFIG_HISAX_HFC_PCI=y -CONFIG_HISAX_W6692=y -CONFIG_HISAX_HFC_SX=y -CONFIG_HISAX_ENTERNOW_PCI=y -# CONFIG_HISAX_DEBUG is not set - -# -# HiSax PCMCIA card service modules -# -CONFIG_HISAX_SEDLBAUER_CS=m -CONFIG_HISAX_ELSA_CS=m -CONFIG_HISAX_AVM_A1_CS=m -CONFIG_HISAX_TELES_CS=m - -# -# HiSax sub driver modules -# -CONFIG_HISAX_ST5481=m -CONFIG_HISAX_HFCUSB=m -CONFIG_HISAX_HFC4S8S=m -CONFIG_HISAX_FRITZ_PCIPNP=m - -# -# Active cards -# -CONFIG_ISDN_CAPI=m +CONFIG_ISDN_CAPI=y CONFIG_CAPI_TRACE=y -CONFIG_ISDN_CAPI_CAPI20=m CONFIG_ISDN_CAPI_MIDDLEWARE=y -CONFIG_ISDN_CAPI_CAPIDRV=m -# CONFIG_ISDN_CAPI_CAPIDRV_VERBOSE is not set - -# -# CAPI hardware drivers -# -CONFIG_CAPI_AVM=y -CONFIG_ISDN_DRV_AVMB1_B1PCI=m -CONFIG_ISDN_DRV_AVMB1_B1PCIV4=y -CONFIG_ISDN_DRV_AVMB1_B1PCMCIA=m -CONFIG_ISDN_DRV_AVMB1_AVM_CS=m -CONFIG_ISDN_DRV_AVMB1_T1PCI=m -CONFIG_ISDN_DRV_AVMB1_C4=m -CONFIG_CAPI_EICON=y -CONFIG_ISDN_DIVAS=m -CONFIG_ISDN_DIVAS_BRIPCI=y -CONFIG_ISDN_DIVAS_PRIPCI=y -CONFIG_ISDN_DIVAS_DIVACAPI=m -CONFIG_ISDN_DIVAS_USERIDI=m -CONFIG_ISDN_DIVAS_MAINT=m -CONFIG_ISDN_DRV_GIGASET=m -# CONFIG_GIGASET_CAPI is not set -CONFIG_GIGASET_I4L=y -# CONFIG_GIGASET_DUMMYLL is not set -CONFIG_GIGASET_BASE=m -CONFIG_GIGASET_M105=m -# CONFIG_GIGASET_M101 is not set -# CONFIG_GIGASET_DEBUG is not set -CONFIG_HYSDN=m -CONFIG_HYSDN_CAPI=y CONFIG_MISDN=m CONFIG_MISDN_DSP=m CONFIG_MISDN_L1OIP=m @@ -3098,13 +3862,11 @@ CONFIG_MISDN_SPEEDFAX=m CONFIG_MISDN_INFINEON=m CONFIG_MISDN_W6692=m CONFIG_MISDN_NETJET=m +CONFIG_MISDN_HDLC=m CONFIG_MISDN_IPAC=m CONFIG_MISDN_ISAR=m -CONFIG_ISDN_HDLC=m CONFIG_NVM=y -# CONFIG_NVM_DEBUG is not set -# CONFIG_NVM_GENNVM is not set -# CONFIG_NVM_RRPC is not set +# CONFIG_NVM_PBLK is not set # # Input device support @@ -3112,7 +3874,6 @@ CONFIG_NVM=y CONFIG_INPUT=y CONFIG_INPUT_LEDS=y CONFIG_INPUT_FF_MEMLESS=y -CONFIG_INPUT_POLLDEV=m CONFIG_INPUT_SPARSEKMAP=m CONFIG_INPUT_MATRIXKMAP=m @@ -3131,11 +3892,15 @@ CONFIG_INPUT_EVDEV=m # Input Device Drivers # CONFIG_INPUT_KEYBOARD=y +# CONFIG_KEYBOARD_ADC is not set CONFIG_KEYBOARD_ADP5588=m CONFIG_KEYBOARD_ADP5589=m +# CONFIG_KEYBOARD_APPLESPI is not set CONFIG_KEYBOARD_ATKBD=y +CONFIG_KEYBOARD_QT1050=m CONFIG_KEYBOARD_QT1070=m CONFIG_KEYBOARD_QT2160=m +CONFIG_KEYBOARD_DLINK_DIR685=m # CONFIG_KEYBOARD_LKKBD is not set CONFIG_KEYBOARD_GPIO=m CONFIG_KEYBOARD_GPIO_POLLED=m @@ -3152,21 +3917,27 @@ CONFIG_KEYBOARD_OPENCORES=m CONFIG_KEYBOARD_SAMSUNG=m CONFIG_KEYBOARD_STOWAWAY=m # CONFIG_KEYBOARD_SUNKBD is not set +CONFIG_KEYBOARD_TM2_TOUCHKEY=m # CONFIG_KEYBOARD_XTKBD is not set CONFIG_KEYBOARD_CROS_EC=m +CONFIG_KEYBOARD_MTK_PMIC=m CONFIG_INPUT_MOUSE=y CONFIG_MOUSE_PS2=m CONFIG_MOUSE_PS2_ALPS=y +CONFIG_MOUSE_PS2_BYD=y CONFIG_MOUSE_PS2_LOGIPS2PP=y CONFIG_MOUSE_PS2_SYNAPTICS=y +CONFIG_MOUSE_PS2_SYNAPTICS_SMBUS=y CONFIG_MOUSE_PS2_CYPRESS=y CONFIG_MOUSE_PS2_LIFEBOOK=y CONFIG_MOUSE_PS2_TRACKPOINT=y CONFIG_MOUSE_PS2_ELANTECH=y +CONFIG_MOUSE_PS2_ELANTECH_SMBUS=y CONFIG_MOUSE_PS2_SENTELIC=y CONFIG_MOUSE_PS2_TOUCHKIT=y CONFIG_MOUSE_PS2_FOCALTECH=y CONFIG_MOUSE_PS2_VMMOUSE=y +CONFIG_MOUSE_PS2_SMBUS=y CONFIG_MOUSE_SERIAL=m CONFIG_MOUSE_APPLETOUCH=m CONFIG_MOUSE_BCM5974=m @@ -3181,6 +3952,7 @@ CONFIG_MOUSE_SYNAPTICS_USB=m CONFIG_INPUT_JOYSTICK=y CONFIG_JOYSTICK_ANALOG=m CONFIG_JOYSTICK_A3D=m +CONFIG_JOYSTICK_ADC=m CONFIG_JOYSTICK_ADI=m CONFIG_JOYSTICK_COBRA=m CONFIG_JOYSTICK_GF2K=m @@ -3191,8 +3963,8 @@ CONFIG_JOYSTICK_INTERACT=m CONFIG_JOYSTICK_SIDEWINDER=m CONFIG_JOYSTICK_TMDC=m CONFIG_JOYSTICK_IFORCE=m -CONFIG_JOYSTICK_IFORCE_USB=y -CONFIG_JOYSTICK_IFORCE_232=y +CONFIG_JOYSTICK_IFORCE_USB=m +CONFIG_JOYSTICK_IFORCE_232=m CONFIG_JOYSTICK_WARRIOR=m CONFIG_JOYSTICK_MAGELLAN=m CONFIG_JOYSTICK_SPACEORB=m @@ -3209,33 +3981,51 @@ CONFIG_JOYSTICK_XPAD=m CONFIG_JOYSTICK_XPAD_FF=y CONFIG_JOYSTICK_XPAD_LEDS=y CONFIG_JOYSTICK_WALKERA0701=m +# CONFIG_JOYSTICK_PSXPAD_SPI is not set +CONFIG_JOYSTICK_PXRC=m +CONFIG_JOYSTICK_FSIA6B=m CONFIG_INPUT_TABLET=y CONFIG_TABLET_USB_ACECAD=m CONFIG_TABLET_USB_AIPTEK=m -CONFIG_TABLET_USB_GTCO=m CONFIG_TABLET_USB_HANWANG=m CONFIG_TABLET_USB_KBTAB=m +CONFIG_TABLET_USB_PEGASUS=m CONFIG_TABLET_SERIAL_WACOM4=m CONFIG_INPUT_TOUCHSCREEN=y -CONFIG_TOUCHSCREEN_PROPERTIES=y +# CONFIG_TOUCHSCREEN_ADS7846 is not set +# CONFIG_TOUCHSCREEN_AD7877 is not set CONFIG_TOUCHSCREEN_AD7879=m CONFIG_TOUCHSCREEN_AD7879_I2C=m +# CONFIG_TOUCHSCREEN_AD7879_SPI is not set +CONFIG_TOUCHSCREEN_ADC=m CONFIG_TOUCHSCREEN_ATMEL_MXT=m +# CONFIG_TOUCHSCREEN_ATMEL_MXT_T37 is not set CONFIG_TOUCHSCREEN_AUO_PIXCIR=m CONFIG_TOUCHSCREEN_BU21013=m +CONFIG_TOUCHSCREEN_BU21029=m +CONFIG_TOUCHSCREEN_CHIPONE_ICN8505=m +CONFIG_TOUCHSCREEN_CY8CTMA140=m CONFIG_TOUCHSCREEN_CY8CTMG110=m CONFIG_TOUCHSCREEN_CYTTSP_CORE=m CONFIG_TOUCHSCREEN_CYTTSP_I2C=m +# CONFIG_TOUCHSCREEN_CYTTSP_SPI is not set CONFIG_TOUCHSCREEN_CYTTSP4_CORE=m CONFIG_TOUCHSCREEN_CYTTSP4_I2C=m +# CONFIG_TOUCHSCREEN_CYTTSP4_SPI is not set CONFIG_TOUCHSCREEN_DYNAPRO=m CONFIG_TOUCHSCREEN_HAMPSHIRE=m CONFIG_TOUCHSCREEN_EETI=m -CONFIG_TOUCHSCREEN_FT6236=m +CONFIG_TOUCHSCREEN_EGALAX_SERIAL=m +CONFIG_TOUCHSCREEN_EXC3000=m CONFIG_TOUCHSCREEN_FUJITSU=m CONFIG_TOUCHSCREEN_GOODIX=m +CONFIG_TOUCHSCREEN_HIDEEP=m +CONFIG_TOUCHSCREEN_HYCON_HY46XX=m CONFIG_TOUCHSCREEN_ILI210X=m +CONFIG_TOUCHSCREEN_ILITEK=m +CONFIG_TOUCHSCREEN_S6SY761=m CONFIG_TOUCHSCREEN_GUNZE=m +CONFIG_TOUCHSCREEN_EKTF2127=m CONFIG_TOUCHSCREEN_ELAN=m CONFIG_TOUCHSCREEN_ELO=m CONFIG_TOUCHSCREEN_WACOM_W8001=m @@ -3243,6 +4033,8 @@ CONFIG_TOUCHSCREEN_WACOM_I2C=m CONFIG_TOUCHSCREEN_MAX11801=m CONFIG_TOUCHSCREEN_MCS5000=m CONFIG_TOUCHSCREEN_MMS114=m +CONFIG_TOUCHSCREEN_MELFAS_MIP4=m +CONFIG_TOUCHSCREEN_MSG2638=m CONFIG_TOUCHSCREEN_MTOUCH=m CONFIG_TOUCHSCREEN_INEXIO=m CONFIG_TOUCHSCREEN_MK712=m @@ -3282,44 +4074,58 @@ CONFIG_TOUCHSCREEN_TOUCHIT213=m CONFIG_TOUCHSCREEN_TSC_SERIO=m CONFIG_TOUCHSCREEN_TSC200X_CORE=m CONFIG_TOUCHSCREEN_TSC2004=m +# CONFIG_TOUCHSCREEN_TSC2005 is not set CONFIG_TOUCHSCREEN_TSC2007=m +CONFIG_TOUCHSCREEN_TSC2007_IIO=y +CONFIG_TOUCHSCREEN_RM_TS=m +CONFIG_TOUCHSCREEN_SILEAD=m +CONFIG_TOUCHSCREEN_SIS_I2C=m CONFIG_TOUCHSCREEN_ST1232=m +# CONFIG_TOUCHSCREEN_STMFTS is not set CONFIG_TOUCHSCREEN_SUR40=m +# CONFIG_TOUCHSCREEN_SURFACE3_SPI is not set CONFIG_TOUCHSCREEN_SX8654=m CONFIG_TOUCHSCREEN_TPS6507X=m +CONFIG_TOUCHSCREEN_ZET6223=m CONFIG_TOUCHSCREEN_ZFORCE=m CONFIG_TOUCHSCREEN_ROHM_BU21023=m +CONFIG_TOUCHSCREEN_IQS5XX=m +CONFIG_TOUCHSCREEN_ZINITIX=m CONFIG_INPUT_MISC=y CONFIG_INPUT_AD714X=m CONFIG_INPUT_AD714X_I2C=m +CONFIG_INPUT_AD714X_SPI=m +# CONFIG_INPUT_ARIZONA_HAPTICS is not set +# CONFIG_INPUT_ATC260X_ONKEY is not set CONFIG_INPUT_BMA150=m CONFIG_INPUT_E3X0_BUTTON=m CONFIG_INPUT_PCSPKR=m CONFIG_INPUT_MC13783_PWRBUTTON=m CONFIG_INPUT_MMA8450=m -CONFIG_INPUT_MPU3050=m CONFIG_INPUT_APANEL=m -CONFIG_INPUT_GP2A=m CONFIG_INPUT_GPIO_BEEPER=m -CONFIG_INPUT_GPIO_TILT_POLLED=m +CONFIG_INPUT_GPIO_DECODER=m +CONFIG_INPUT_GPIO_VIBRA=m CONFIG_INPUT_ATLAS_BTNS=m CONFIG_INPUT_ATI_REMOTE2=m CONFIG_INPUT_KEYSPAN_REMOTE=m CONFIG_INPUT_KXTJ9=m -CONFIG_INPUT_KXTJ9_POLLED_MODE=y CONFIG_INPUT_POWERMATE=m CONFIG_INPUT_YEALINK=m CONFIG_INPUT_CM109=m CONFIG_INPUT_REGULATOR_HAPTIC=m CONFIG_INPUT_RETU_PWRBUTTON=m -CONFIG_INPUT_TPS65218_PWRBUTTON=m CONFIG_INPUT_UINPUT=m CONFIG_INPUT_PCF50633_PMU=m CONFIG_INPUT_PCF8574=m CONFIG_INPUT_GPIO_ROTARY_ENCODER=m +CONFIG_INPUT_DA7280_HAPTICS=m CONFIG_INPUT_ADXL34X=m CONFIG_INPUT_ADXL34X_I2C=m +CONFIG_INPUT_ADXL34X_SPI=m CONFIG_INPUT_IMS_PCU=m +CONFIG_INPUT_IQS269A=m +CONFIG_INPUT_IQS626A=m CONFIG_INPUT_CMA3000=m CONFIG_INPUT_CMA3000_I2C=m CONFIG_INPUT_XEN_KBDDEV_FRONTEND=y @@ -3328,6 +4134,20 @@ CONFIG_INPUT_SOC_BUTTON_ARRAY=m CONFIG_INPUT_DRV260X_HAPTICS=m CONFIG_INPUT_DRV2665_HAPTICS=m CONFIG_INPUT_DRV2667_HAPTICS=m +CONFIG_RMI4_CORE=m +CONFIG_RMI4_I2C=m +# CONFIG_RMI4_SPI is not set +CONFIG_RMI4_SMB=m +CONFIG_RMI4_F03=y +CONFIG_RMI4_F03_SERIO=m +CONFIG_RMI4_2D_SENSOR=y +CONFIG_RMI4_F11=y +CONFIG_RMI4_F12=y +CONFIG_RMI4_F30=y +CONFIG_RMI4_F34=y +CONFIG_RMI4_F3A=y +# CONFIG_RMI4_F54 is not set +CONFIG_RMI4_F55=y # # Hardware I/O ports @@ -3345,12 +4165,15 @@ CONFIG_SERIO_ALTERA_PS2=m CONFIG_SERIO_PS2MULT=m CONFIG_SERIO_ARC_PS2=m CONFIG_HYPERV_KEYBOARD=m +# CONFIG_SERIO_GPIO_PS2 is not set CONFIG_USERIO=m CONFIG_GAMEPORT=m CONFIG_GAMEPORT_NS558=m CONFIG_GAMEPORT_L4=m CONFIG_GAMEPORT_EMU10K1=m CONFIG_GAMEPORT_FM801=m +# end of Hardware I/O ports +# end of Input device support # # Character devices @@ -3363,27 +4186,9 @@ CONFIG_VT_CONSOLE_SLEEP=y CONFIG_HW_CONSOLE=y CONFIG_VT_HW_CONSOLE_BINDING=y CONFIG_UNIX98_PTYS=y -CONFIG_DEVPTS_MULTIPLE_INSTANCES=y CONFIG_LEGACY_PTYS=y CONFIG_LEGACY_PTY_COUNT=32 -CONFIG_SERIAL_NONSTANDARD=y -CONFIG_ROCKETPORT=m -CONFIG_CYCLADES=m -# CONFIG_CYZ_INTR is not set -CONFIG_MOXA_INTELLIO=m -CONFIG_MOXA_SMARTIO=m -CONFIG_SYNCLINK=m -CONFIG_SYNCLINKMP=m -CONFIG_SYNCLINK_GT=m -CONFIG_NOZOMI=m -CONFIG_ISI=m -CONFIG_N_HDLC=m -CONFIG_N_GSM=m -CONFIG_TRACE_ROUTER=m -CONFIG_TRACE_SINK=m CONFIG_LDISC_AUTOLOAD=y -CONFIG_DEVMEM=y -CONFIG_DEVKMEM=y # # Serial drivers @@ -3392,9 +4197,12 @@ CONFIG_SERIAL_EARLYCON=y CONFIG_SERIAL_8250=y # CONFIG_SERIAL_8250_DEPRECATED_OPTIONS is not set CONFIG_SERIAL_8250_PNP=y +# CONFIG_SERIAL_8250_16550A_VARIANTS is not set +# CONFIG_SERIAL_8250_FINTEK is not set CONFIG_SERIAL_8250_CONSOLE=y CONFIG_SERIAL_8250_DMA=y CONFIG_SERIAL_8250_PCI=y +CONFIG_SERIAL_8250_EXAR=m CONFIG_SERIAL_8250_CS=m CONFIG_SERIAL_8250_NR_UARTS=4 CONFIG_SERIAL_8250_RUNTIME_UARTS=4 @@ -3403,22 +4211,28 @@ CONFIG_SERIAL_8250_MANY_PORTS=y CONFIG_SERIAL_8250_SHARE_IRQ=y CONFIG_SERIAL_8250_DETECT_IRQ=y CONFIG_SERIAL_8250_RSA=y -# CONFIG_SERIAL_8250_FSL is not set +CONFIG_SERIAL_8250_DWLIB=y CONFIG_SERIAL_8250_DW=m CONFIG_SERIAL_8250_RT288X=y -CONFIG_SERIAL_8250_FINTEK=m +CONFIG_SERIAL_8250_LPSS=m CONFIG_SERIAL_8250_MID=m # # Non-8250 serial port support # +# CONFIG_SERIAL_MAX3100 is not set +# CONFIG_SERIAL_MAX310X is not set CONFIG_SERIAL_UARTLITE=m +CONFIG_SERIAL_UARTLITE_NR_UARTS=1 CONFIG_SERIAL_CORE=y CONFIG_SERIAL_CORE_CONSOLE=y CONFIG_SERIAL_JSM=m +CONFIG_SERIAL_LANTIQ=m CONFIG_SERIAL_SCCNXP=m CONFIG_SERIAL_SC16IS7XX=m # CONFIG_SERIAL_SC16IS7XX_I2C is not set +# CONFIG_SERIAL_SC16IS7XX_SPI is not set +CONFIG_SERIAL_BCM63XX=m CONFIG_SERIAL_ALTERA_JTAGUART=m CONFIG_SERIAL_ALTERA_UART=m CONFIG_SERIAL_ALTERA_UART_MAXPORTS=4 @@ -3428,31 +4242,48 @@ CONFIG_SERIAL_ARC_NR_PORTS=1 CONFIG_SERIAL_RP2=m CONFIG_SERIAL_RP2_NR_UARTS=32 CONFIG_SERIAL_FSL_LPUART=m -# CONFIG_TTY_PRINTK is not set -CONFIG_PRINTER=m -CONFIG_LP_CONSOLE=y -CONFIG_PPDEV=m +# CONFIG_SERIAL_FSL_LINFLEXUART is not set +# CONFIG_SERIAL_SPRD is not set +# end of Serial drivers + +CONFIG_SERIAL_MCTRL_GPIO=y +CONFIG_SERIAL_NONSTANDARD=y +CONFIG_MOXA_INTELLIO=m +CONFIG_MOXA_SMARTIO=m +CONFIG_SYNCLINK_GT=m +CONFIG_N_HDLC=m +CONFIG_N_GSM=m +CONFIG_NOZOMI=m +CONFIG_NULL_TTY=m CONFIG_HVC_DRIVER=y CONFIG_HVC_IRQ=y CONFIG_HVC_XEN=y CONFIG_HVC_XEN_FRONTEND=y +CONFIG_SERIAL_DEV_BUS=y +CONFIG_SERIAL_DEV_CTRL_TTYPORT=y +# CONFIG_TTY_PRINTK is not set +CONFIG_PRINTER=m +CONFIG_LP_CONSOLE=y +CONFIG_PPDEV=m CONFIG_VIRTIO_CONSOLE=m CONFIG_IPMI_HANDLER=m +CONFIG_IPMI_DMI_DECODE=y +CONFIG_IPMI_PLAT_DATA=y # CONFIG_IPMI_PANIC_EVENT is not set CONFIG_IPMI_DEVICE_INTERFACE=m CONFIG_IPMI_SI=m -# CONFIG_IPMI_SI_PROBE_DEFAULTS is not set CONFIG_IPMI_SSIF=m CONFIG_IPMI_WATCHDOG=m CONFIG_IPMI_POWEROFF=m +# CONFIG_IPMB_DEVICE_INTERFACE is not set CONFIG_HW_RANDOM=y CONFIG_HW_RANDOM_TIMERIOMEM=m CONFIG_HW_RANDOM_INTEL=m CONFIG_HW_RANDOM_AMD=m +CONFIG_HW_RANDOM_BA431=m CONFIG_HW_RANDOM_VIA=m CONFIG_HW_RANDOM_VIRTIO=m -CONFIG_HW_RANDOM_TPM=m -CONFIG_NVRAM=m +CONFIG_HW_RANDOM_XIPHERA=m CONFIG_APPLICOM=m # @@ -3461,16 +4292,26 @@ CONFIG_APPLICOM=m CONFIG_SYNCLINK_CS=m CONFIG_CARDMAN_4000=m CONFIG_CARDMAN_4040=m +CONFIG_SCR24X=m CONFIG_IPWIRELESS=m +# end of PCMCIA character devices + CONFIG_MWAVE=m +CONFIG_DEVMEM=y +CONFIG_NVRAM=m CONFIG_RAW_DRIVER=m CONFIG_MAX_RAW_DEVS=256 +CONFIG_DEVPORT=y CONFIG_HPET=y CONFIG_HPET_MMAP=y CONFIG_HPET_MMAP_DEFAULT=y CONFIG_HANGCHECK_TIMER=m -CONFIG_TCG_TPM=m +CONFIG_TCG_TPM=y +CONFIG_HW_RANDOM_TPM=y +CONFIG_TCG_TIS_CORE=m CONFIG_TCG_TIS=m +# CONFIG_TCG_TIS_SPI is not set +CONFIG_TCG_TIS_I2C_CR50=m CONFIG_TCG_TIS_I2C_ATMEL=m CONFIG_TCG_TIS_I2C_INFINEON=m CONFIG_TCG_TIS_I2C_NUVOTON=m @@ -3479,11 +4320,16 @@ CONFIG_TCG_ATMEL=m CONFIG_TCG_INFINEON=m # CONFIG_TCG_XEN is not set CONFIG_TCG_CRB=m +# CONFIG_TCG_VTPM_PROXY is not set CONFIG_TCG_TIS_ST33ZP24=m CONFIG_TCG_TIS_ST33ZP24_I2C=m +# CONFIG_TCG_TIS_ST33ZP24_SPI is not set CONFIG_TELCLOCK=m -CONFIG_DEVPORT=y # CONFIG_XILLYBUS is not set +# end of Character devices + +CONFIG_RANDOM_TRUST_CPU=y +# CONFIG_RANDOM_TRUST_BOOTLOADER is not set # # I2C support @@ -3498,10 +4344,13 @@ CONFIG_I2C_MUX=m # Multiplexer I2C Chip support # CONFIG_I2C_MUX_GPIO=m +CONFIG_I2C_MUX_LTC4306=m CONFIG_I2C_MUX_PCA9541=m CONFIG_I2C_MUX_PCA954x=m -CONFIG_I2C_MUX_PINCTRL=m CONFIG_I2C_MUX_REG=m +CONFIG_I2C_MUX_MLXCPLD=m +# end of Multiplexer I2C Chip support + CONFIG_I2C_HELPER_AUTO=y CONFIG_I2C_SMBUS=m CONFIG_I2C_ALGOBIT=m @@ -3520,12 +4369,14 @@ CONFIG_I2C_ALI15X3=m CONFIG_I2C_AMD756=m CONFIG_I2C_AMD756_S4882=m CONFIG_I2C_AMD8111=m +CONFIG_I2C_AMD_MP2=m CONFIG_I2C_I801=m CONFIG_I2C_ISCH=m CONFIG_I2C_ISMT=m CONFIG_I2C_PIIX4=m CONFIG_I2C_NFORCE2=m CONFIG_I2C_NFORCE2_S4985=m +CONFIG_I2C_NVIDIA_GPU=m CONFIG_I2C_SIS5595=m CONFIG_I2C_SIS630=m CONFIG_I2C_SIS96X=m @@ -3542,13 +4393,15 @@ CONFIG_I2C_SCMI=m # # CONFIG_I2C_CBUS_GPIO is not set CONFIG_I2C_DESIGNWARE_CORE=m +CONFIG_I2C_DESIGNWARE_SLAVE=y CONFIG_I2C_DESIGNWARE_PLATFORM=m +CONFIG_I2C_DESIGNWARE_BAYTRAIL=y CONFIG_I2C_DESIGNWARE_PCI=m CONFIG_I2C_EMEV2=m CONFIG_I2C_GPIO=m +# CONFIG_I2C_GPIO_FAULT_INJECTOR is not set CONFIG_I2C_OCORES=m CONFIG_I2C_PCA_PLATFORM=m -# CONFIG_I2C_PXA_PCI is not set CONFIG_I2C_SIMTEC=m CONFIG_I2C_XILINX=m @@ -3557,8 +4410,8 @@ CONFIG_I2C_XILINX=m # CONFIG_I2C_DIOLAN_U2C=m CONFIG_I2C_DLN2=m +CONFIG_I2C_CP2615=m CONFIG_I2C_PARPORT=m -CONFIG_I2C_PARPORT_LIGHT=m CONFIG_I2C_ROBOTFUZZ_OSIF=m CONFIG_I2C_TAOS_EVM=m CONFIG_I2C_TINY_USB=m @@ -3567,14 +4420,64 @@ CONFIG_I2C_VIPERBOARD=m # # Other I2C/SMBus bus drivers # +# CONFIG_I2C_MLXCPLD is not set CONFIG_I2C_CROS_EC_TUNNEL=m +# end of I2C Hardware Bus support + CONFIG_I2C_STUB=m CONFIG_I2C_SLAVE=y CONFIG_I2C_SLAVE_EEPROM=m +# CONFIG_I2C_SLAVE_TESTUNIT is not set # CONFIG_I2C_DEBUG_CORE is not set # CONFIG_I2C_DEBUG_ALGO is not set # CONFIG_I2C_DEBUG_BUS is not set -# CONFIG_SPI is not set +# end of I2C support + +# CONFIG_I3C is not set +CONFIG_SPI=y +# CONFIG_SPI_DEBUG is not set +CONFIG_SPI_MASTER=y +# CONFIG_SPI_MEM is not set + +# +# SPI Master Controller Drivers +# +# CONFIG_SPI_ALTERA is not set +# CONFIG_SPI_AXI_SPI_ENGINE is not set +# CONFIG_SPI_BITBANG is not set +# CONFIG_SPI_BUTTERFLY is not set +# CONFIG_SPI_CADENCE is not set +# CONFIG_SPI_DESIGNWARE is not set +# CONFIG_SPI_DLN2 is not set +# CONFIG_SPI_NXP_FLEXSPI is not set +# CONFIG_SPI_GPIO is not set +# CONFIG_SPI_LM70_LLP is not set +# CONFIG_SPI_LANTIQ_SSC is not set +# CONFIG_SPI_OC_TINY is not set +CONFIG_SPI_PXA2XX=m +CONFIG_SPI_PXA2XX_PCI=m +# CONFIG_SPI_ROCKCHIP is not set +# CONFIG_SPI_SC18IS602 is not set +# CONFIG_SPI_SIFIVE is not set +# CONFIG_SPI_MXIC is not set +# CONFIG_SPI_XCOMM is not set +# CONFIG_SPI_XILINX is not set +# CONFIG_SPI_ZYNQMP_GQSPI is not set +# CONFIG_SPI_AMD is not set + +# +# SPI Multiplexer support +# +CONFIG_SPI_MUX=m + +# +# SPI Protocol Masters +# +# CONFIG_SPI_SPIDEV is not set +# CONFIG_SPI_LOOPBACK_TEST is not set +# CONFIG_SPI_TLE62X0 is not set +# CONFIG_SPI_SLAVE is not set +CONFIG_SPI_DYNAMIC=y # CONFIG_SPMI is not set CONFIG_HSI=m CONFIG_HSI_BOARDINFO=y @@ -3587,11 +4490,7 @@ CONFIG_HSI_BOARDINFO=y # HSI clients # CONFIG_HSI_CHAR=m - -# -# PPS support -# -CONFIG_PPS=m +CONFIG_PPS=y # CONFIG_PPS_DEBUG is not set # @@ -3609,55 +4508,81 @@ CONFIG_PPS_CLIENT_GPIO=m # # PTP clock support # -CONFIG_PTP_1588_CLOCK=m +CONFIG_PTP_1588_CLOCK=y +CONFIG_DP83640_PHY=m +# CONFIG_PTP_1588_CLOCK_INES is not set +CONFIG_PTP_1588_CLOCK_KVM=m +CONFIG_PTP_1588_CLOCK_IDT82P33=m +CONFIG_PTP_1588_CLOCK_IDTCM=m +CONFIG_PTP_1588_CLOCK_VMW=m +CONFIG_PTP_1588_CLOCK_OCP=m +# end of PTP clock support -# -# Enable PHYLIB and NETWORK_PHY_TIMESTAMPING to see the additional clocks. -# CONFIG_PINCTRL=y - -# -# Pin controllers -# CONFIG_PINMUX=y CONFIG_PINCONF=y CONFIG_GENERIC_PINCONF=y # CONFIG_DEBUG_PINCTRL is not set CONFIG_PINCTRL_AMD=y +# CONFIG_PINCTRL_MCP23S08 is not set CONFIG_PINCTRL_BAYTRAIL=y CONFIG_PINCTRL_CHERRYVIEW=m -CONFIG_PINCTRL_INTEL=m +CONFIG_PINCTRL_LYNXPOINT=m +CONFIG_PINCTRL_INTEL=y +CONFIG_PINCTRL_ALDERLAKE=m CONFIG_PINCTRL_BROXTON=m +# CONFIG_PINCTRL_CANNONLAKE is not set +CONFIG_PINCTRL_CEDARFORK=m +CONFIG_PINCTRL_DENVERTON=m +CONFIG_PINCTRL_ELKHARTLAKE=m +CONFIG_PINCTRL_EMMITSBURG=m +CONFIG_PINCTRL_GEMINILAKE=m +CONFIG_PINCTRL_ICELAKE=m +CONFIG_PINCTRL_JASPERLAKE=m +CONFIG_PINCTRL_LAKEFIELD=m +CONFIG_PINCTRL_LEWISBURG=m CONFIG_PINCTRL_SUNRISEPOINT=m -CONFIG_ARCH_WANT_OPTIONAL_GPIOLIB=y +CONFIG_PINCTRL_TIGERLAKE=m + +# +# Renesas pinctrl drivers +# +# end of Renesas pinctrl drivers + CONFIG_GPIOLIB=y -CONFIG_GPIO_DEVRES=y +CONFIG_GPIOLIB_FASTPATH_LIMIT=512 CONFIG_GPIO_ACPI=y CONFIG_GPIOLIB_IRQCHIP=y # CONFIG_DEBUG_GPIO is not set CONFIG_GPIO_SYSFS=y +CONFIG_GPIO_CDEV=y +CONFIG_GPIO_CDEV_V1=y CONFIG_GPIO_GENERIC=m CONFIG_GPIO_MAX730X=m # # Memory mapped GPIO drivers # -# CONFIG_GPIO_AMDPT is not set +CONFIG_GPIO_AMDPT=m CONFIG_GPIO_DWAPB=m +CONFIG_GPIO_EXAR=m CONFIG_GPIO_GENERIC_PLATFORM=m CONFIG_GPIO_ICH=m -CONFIG_GPIO_LYNXPOINT=y +# CONFIG_GPIO_MB86S7X is not set CONFIG_GPIO_VX855=m -# CONFIG_GPIO_ZX is not set +CONFIG_GPIO_AMD_FCH=m +# end of Memory mapped GPIO drivers # # Port-mapped I/O GPIO drivers # -# CONFIG_GPIO_104_IDIO_16 is not set CONFIG_GPIO_F7188X=m # CONFIG_GPIO_IT87 is not set CONFIG_GPIO_SCH=m CONFIG_GPIO_SCH311X=m +# CONFIG_GPIO_WINBOND is not set +# CONFIG_GPIO_WS16C48 is not set +# end of Port-mapped I/O GPIO drivers # # I2C GPIO expanders @@ -3666,35 +4591,58 @@ CONFIG_GPIO_ADP5588=m CONFIG_GPIO_MAX7300=m CONFIG_GPIO_MAX732X=m CONFIG_GPIO_PCA953X=m +# CONFIG_GPIO_PCA953X_IRQ is not set +CONFIG_GPIO_PCA9570=m CONFIG_GPIO_PCF857X=m +# CONFIG_GPIO_TPIC2810 is not set +# end of I2C GPIO expanders # # MFD GPIO expanders # CONFIG_GPIO_ARIZONA=m +CONFIG_GPIO_BD9571MWV=m CONFIG_GPIO_DLN2=m CONFIG_GPIO_JANZ_TTL=m CONFIG_GPIO_LP3943=m # CONFIG_GPIO_UCB1400 is not set +CONFIG_GPIO_WHISKEY_COVE=m CONFIG_GPIO_WM8994=m +# end of MFD GPIO expanders # # PCI GPIO expanders # CONFIG_GPIO_AMD8111=m -# CONFIG_GPIO_INTEL_MID is not set CONFIG_GPIO_ML_IOH=m +CONFIG_GPIO_PCI_IDIO_16=m +# CONFIG_GPIO_PCIE_IDIO_24 is not set CONFIG_GPIO_RDC321X=m +# end of PCI GPIO expanders # -# SPI or I2C GPIO expanders +# SPI GPIO expanders # -# CONFIG_GPIO_MCP23S08 is not set +# CONFIG_GPIO_MAX3191X is not set +# CONFIG_GPIO_MAX7301 is not set +# CONFIG_GPIO_MC33880 is not set +# CONFIG_GPIO_PISOSR is not set +# CONFIG_GPIO_XRA1403 is not set +# end of SPI GPIO expanders # # USB GPIO expanders # CONFIG_GPIO_VIPERBOARD=m +# end of USB GPIO expanders + +# +# Virtual GPIO drivers +# +CONFIG_GPIO_AGGREGATOR=m +# CONFIG_GPIO_MOCKUP is not set +# end of Virtual GPIO drivers + CONFIG_W1=m CONFIG_W1_CON=y @@ -3706,58 +4654,86 @@ CONFIG_W1_MASTER_DS2490=m CONFIG_W1_MASTER_DS2482=m CONFIG_W1_MASTER_DS1WM=m CONFIG_W1_MASTER_GPIO=m +# CONFIG_W1_MASTER_SGI is not set +# end of 1-wire Bus Masters # # 1-wire Slaves # CONFIG_W1_SLAVE_THERM=m CONFIG_W1_SLAVE_SMEM=m +CONFIG_W1_SLAVE_DS2405=m CONFIG_W1_SLAVE_DS2408=m # CONFIG_W1_SLAVE_DS2408_READBACK is not set CONFIG_W1_SLAVE_DS2413=m CONFIG_W1_SLAVE_DS2406=m CONFIG_W1_SLAVE_DS2423=m +CONFIG_W1_SLAVE_DS2805=m +CONFIG_W1_SLAVE_DS2430=m CONFIG_W1_SLAVE_DS2431=m CONFIG_W1_SLAVE_DS2433=m CONFIG_W1_SLAVE_DS2433_CRC=y -CONFIG_W1_SLAVE_DS2760=m +CONFIG_W1_SLAVE_DS2438=m +# CONFIG_W1_SLAVE_DS250X is not set CONFIG_W1_SLAVE_DS2780=m CONFIG_W1_SLAVE_DS2781=m CONFIG_W1_SLAVE_DS28E04=m -CONFIG_W1_SLAVE_BQ27000=m +# CONFIG_W1_SLAVE_DS28E17 is not set +# end of 1-wire Slaves + +CONFIG_POWER_RESET=y +# CONFIG_POWER_RESET_ATC260X is not set +# CONFIG_POWER_RESET_MT6323 is not set +# CONFIG_POWER_RESET_RESTART is not set CONFIG_POWER_SUPPLY=y # CONFIG_POWER_SUPPLY_DEBUG is not set +CONFIG_POWER_SUPPLY_HWMON=y CONFIG_PDA_POWER=m CONFIG_GENERIC_ADC_BATTERY=m CONFIG_TEST_POWER=m +# CONFIG_CHARGER_ADP5061 is not set +CONFIG_BATTERY_CW2015=m CONFIG_BATTERY_DS2760=m CONFIG_BATTERY_DS2780=m CONFIG_BATTERY_DS2781=m CONFIG_BATTERY_DS2782=m CONFIG_BATTERY_SBS=m +CONFIG_CHARGER_SBS=m +# CONFIG_MANAGER_SBS is not set CONFIG_BATTERY_BQ27XXX=m -CONFIG_BATTERY_BQ27XXX_I2C=y -CONFIG_BATTERY_BQ27XXX_PLATFORM=y +CONFIG_BATTERY_BQ27XXX_I2C=m +CONFIG_BATTERY_BQ27XXX_HDQ=m +# CONFIG_BATTERY_BQ27XXX_DT_UPDATES_NVM is not set CONFIG_BATTERY_MAX17040=m CONFIG_BATTERY_MAX17042=m +# CONFIG_BATTERY_MAX1721X is not set CONFIG_CHARGER_PCF50633=m +# CONFIG_CHARGER_ISP1704 is not set CONFIG_CHARGER_MAX8903=m CONFIG_CHARGER_LP8727=m CONFIG_CHARGER_GPIO=m # CONFIG_CHARGER_MANAGER is not set +CONFIG_CHARGER_LT3651=m +CONFIG_CHARGER_LTC4162L=m CONFIG_CHARGER_BQ2415X=m CONFIG_CHARGER_BQ24190=m CONFIG_CHARGER_BQ24257=m CONFIG_CHARGER_BQ24735=m +CONFIG_CHARGER_BQ2515X=m CONFIG_CHARGER_BQ25890=m +CONFIG_CHARGER_BQ25980=m +CONFIG_CHARGER_BQ256XX=m CONFIG_CHARGER_SMB347=m -CONFIG_CHARGER_TPS65217=m CONFIG_BATTERY_GAUGE_LTC2941=m +CONFIG_BATTERY_GOLDFISH=m +# CONFIG_BATTERY_RT5033 is not set CONFIG_CHARGER_RT9455=m -CONFIG_POWER_RESET=y -# CONFIG_POWER_RESET_RESTART is not set -CONFIG_POWER_AVS=y -CONFIG_HWMON=m +CONFIG_CHARGER_CROS_USBPD=m +CONFIG_CHARGER_BD99954=m +CONFIG_CHARGER_WILCO=m +CONFIG_BATTERY_SURFACE=m +CONFIG_CHARGER_SURFACE=m +CONFIG_HWMON=y CONFIG_HWMON_VID=m # CONFIG_HWMON_DEBUG_CHIP is not set @@ -3766,6 +4742,7 @@ CONFIG_HWMON_VID=m # CONFIG_SENSORS_ABITUGURU=m CONFIG_SENSORS_ABITUGURU3=m +# CONFIG_SENSORS_AD7314 is not set CONFIG_SENSORS_AD7414=m CONFIG_SENSORS_AD7418=m CONFIG_SENSORS_ADM1021=m @@ -3773,20 +4750,29 @@ CONFIG_SENSORS_ADM1025=m CONFIG_SENSORS_ADM1026=m CONFIG_SENSORS_ADM1029=m CONFIG_SENSORS_ADM1031=m +CONFIG_SENSORS_ADM1177=m CONFIG_SENSORS_ADM9240=m CONFIG_SENSORS_ADT7X10=m +# CONFIG_SENSORS_ADT7310 is not set CONFIG_SENSORS_ADT7410=m CONFIG_SENSORS_ADT7411=m CONFIG_SENSORS_ADT7462=m CONFIG_SENSORS_ADT7470=m CONFIG_SENSORS_ADT7475=m +CONFIG_SENSORS_AHT10=m +# CONFIG_SENSORS_AS370 is not set CONFIG_SENSORS_ASC7621=m +CONFIG_SENSORS_AXI_FAN_CONTROL=m CONFIG_SENSORS_K8TEMP=m CONFIG_SENSORS_K10TEMP=m CONFIG_SENSORS_FAM15H_POWER=m CONFIG_SENSORS_APPLESMC=m CONFIG_SENSORS_ASB100=m +CONFIG_SENSORS_ASPEED=m CONFIG_SENSORS_ATXP1=m +CONFIG_SENSORS_CORSAIR_CPRO=m +CONFIG_SENSORS_CORSAIR_PSU=m +CONFIG_SENSORS_DRIVETEMP=m CONFIG_SENSORS_DS620=m CONFIG_SENSORS_DS1621=m CONFIG_SENSORS_DELL_SMM=m @@ -3796,11 +4782,11 @@ CONFIG_SENSORS_F71882FG=m CONFIG_SENSORS_F75375S=m CONFIG_SENSORS_MC13783_ADC=m CONFIG_SENSORS_FSCHMD=m +CONFIG_SENSORS_FTSTEUTATES=m CONFIG_SENSORS_GL518SM=m CONFIG_SENSORS_GL520SM=m CONFIG_SENSORS_G760A=m CONFIG_SENSORS_G762=m -CONFIG_SENSORS_GPIO_FAN=m CONFIG_SENSORS_HIH6130=m CONFIG_SENSORS_IBMAEM=m CONFIG_SENSORS_IBMPEX=m @@ -3812,25 +4798,40 @@ CONFIG_SENSORS_JC42=m CONFIG_SENSORS_POWR1220=m CONFIG_SENSORS_LINEAGE=m CONFIG_SENSORS_LTC2945=m +CONFIG_SENSORS_LTC2947=m +CONFIG_SENSORS_LTC2947_I2C=m +CONFIG_SENSORS_LTC2947_SPI=m +CONFIG_SENSORS_LTC2990=m +CONFIG_SENSORS_LTC2992=m CONFIG_SENSORS_LTC4151=m CONFIG_SENSORS_LTC4215=m CONFIG_SENSORS_LTC4222=m CONFIG_SENSORS_LTC4245=m CONFIG_SENSORS_LTC4260=m CONFIG_SENSORS_LTC4261=m +# CONFIG_SENSORS_MAX1111 is not set +CONFIG_SENSORS_MAX127=m CONFIG_SENSORS_MAX16065=m CONFIG_SENSORS_MAX1619=m CONFIG_SENSORS_MAX1668=m CONFIG_SENSORS_MAX197=m +# CONFIG_SENSORS_MAX31722 is not set +# CONFIG_SENSORS_MAX31730 is not set +CONFIG_SENSORS_MAX6621=m CONFIG_SENSORS_MAX6639=m CONFIG_SENSORS_MAX6642=m CONFIG_SENSORS_MAX6650=m CONFIG_SENSORS_MAX6697=m CONFIG_SENSORS_MAX31790=m -CONFIG_SENSORS_HTU21=m CONFIG_SENSORS_MCP3021=m +CONFIG_SENSORS_MLXREG_FAN=m +CONFIG_SENSORS_TC654=m +CONFIG_SENSORS_TPS23861=m CONFIG_SENSORS_MENF21BMC_HWMON=m +CONFIG_SENSORS_MR75203=m +# CONFIG_SENSORS_ADCXX is not set CONFIG_SENSORS_LM63=m +# CONFIG_SENSORS_LM70 is not set CONFIG_SENSORS_LM73=m CONFIG_SENSORS_LM75=m CONFIG_SENSORS_LM77=m @@ -3852,23 +4853,50 @@ CONFIG_SENSORS_NCT6683=m CONFIG_SENSORS_NCT6775=m CONFIG_SENSORS_NCT7802=m CONFIG_SENSORS_NCT7904=m +CONFIG_SENSORS_NPCM7XX=m +CONFIG_SENSORS_NZXT_KRAKEN2=m CONFIG_SENSORS_PCF8591=m CONFIG_PMBUS=m CONFIG_SENSORS_PMBUS=m +CONFIG_SENSORS_ADM1266=m CONFIG_SENSORS_ADM1275=m +CONFIG_SENSORS_BEL_PFE=m +CONFIG_SENSORS_BPA_RS600=m +CONFIG_SENSORS_FSP_3Y=m +CONFIG_SENSORS_IBM_CFFPS=m +# CONFIG_SENSORS_INSPUR_IPSPS is not set +CONFIG_SENSORS_IR35221=m +CONFIG_SENSORS_IR36021=m +CONFIG_SENSORS_IR38064=m +# CONFIG_SENSORS_IRPS5401 is not set +# CONFIG_SENSORS_ISL68137 is not set CONFIG_SENSORS_LM25066=m CONFIG_SENSORS_LTC2978=m CONFIG_SENSORS_LTC2978_REGULATOR=y +CONFIG_SENSORS_LTC3815=m +CONFIG_SENSORS_MAX15301=m CONFIG_SENSORS_MAX16064=m +CONFIG_SENSORS_MAX16601=m +CONFIG_SENSORS_MAX20730=m CONFIG_SENSORS_MAX20751=m +CONFIG_SENSORS_MAX31785=m CONFIG_SENSORS_MAX34440=m CONFIG_SENSORS_MAX8688=m +CONFIG_SENSORS_MP2975=m +CONFIG_SENSORS_PM6764TR=m +# CONFIG_SENSORS_PXE1610 is not set +CONFIG_SENSORS_Q54SJ108A2=m +CONFIG_SENSORS_STPDDC60=m CONFIG_SENSORS_TPS40422=m +CONFIG_SENSORS_TPS53679=m CONFIG_SENSORS_UCD9000=m CONFIG_SENSORS_UCD9200=m +CONFIG_SENSORS_XDPE122=m CONFIG_SENSORS_ZL6100=m +CONFIG_SENSORS_SBTSI=m CONFIG_SENSORS_SHT15=m CONFIG_SENSORS_SHT21=m +CONFIG_SENSORS_SHT3x=m CONFIG_SENSORS_SHTC1=m CONFIG_SENSORS_SIS5595=m CONFIG_SENSORS_DME1737=m @@ -3881,23 +4909,28 @@ CONFIG_SENSORS_SMSC47B397=m CONFIG_SENSORS_SCH56XX_COMMON=m CONFIG_SENSORS_SCH5627=m CONFIG_SENSORS_SCH5636=m +CONFIG_SENSORS_STTS751=m CONFIG_SENSORS_SMM665=m CONFIG_SENSORS_ADC128D818=m -CONFIG_SENSORS_ADS1015=m CONFIG_SENSORS_ADS7828=m +# CONFIG_SENSORS_ADS7871 is not set CONFIG_SENSORS_AMC6821=m CONFIG_SENSORS_INA209=m CONFIG_SENSORS_INA2XX=m +CONFIG_SENSORS_INA3221=m CONFIG_SENSORS_TC74=m CONFIG_SENSORS_THMC50=m CONFIG_SENSORS_TMP102=m CONFIG_SENSORS_TMP103=m +CONFIG_SENSORS_TMP108=m CONFIG_SENSORS_TMP401=m CONFIG_SENSORS_TMP421=m +CONFIG_SENSORS_TMP513=m CONFIG_SENSORS_VIA_CPUTEMP=m CONFIG_SENSORS_VIA686A=m CONFIG_SENSORS_VT1211=m CONFIG_SENSORS_VT8231=m +CONFIG_SENSORS_W83773G=m CONFIG_SENSORS_W83781D=m CONFIG_SENSORS_W83791D=m CONFIG_SENSORS_W83792D=m @@ -3908,6 +4941,8 @@ CONFIG_SENSORS_W83L785TS=m CONFIG_SENSORS_W83L786NG=m CONFIG_SENSORS_W83627HF=m CONFIG_SENSORS_W83627EHF=m +CONFIG_SENSORS_XGENE=m +CONFIG_SENSORS_INTEL_M10_BMC_HWMON=m # # ACPI drivers @@ -3915,43 +4950,75 @@ CONFIG_SENSORS_W83627EHF=m CONFIG_SENSORS_ACPI_POWER=m CONFIG_SENSORS_ATK0110=m CONFIG_THERMAL=y +CONFIG_THERMAL_NETLINK=y +CONFIG_THERMAL_STATISTICS=y +CONFIG_THERMAL_EMERGENCY_POWEROFF_DELAY_MS=0 +CONFIG_THERMAL_HWMON=y CONFIG_THERMAL_WRITABLE_TRIPS=y CONFIG_THERMAL_DEFAULT_GOV_STEP_WISE=y # CONFIG_THERMAL_DEFAULT_GOV_FAIR_SHARE is not set # CONFIG_THERMAL_DEFAULT_GOV_USER_SPACE is not set -# CONFIG_THERMAL_DEFAULT_GOV_POWER_ALLOCATOR is not set CONFIG_THERMAL_GOV_FAIR_SHARE=y CONFIG_THERMAL_GOV_STEP_WISE=y CONFIG_THERMAL_GOV_BANG_BANG=y CONFIG_THERMAL_GOV_USER_SPACE=y -CONFIG_THERMAL_GOV_POWER_ALLOCATOR=y +# CONFIG_DEVFREQ_THERMAL is not set CONFIG_THERMAL_EMULATION=y + +# +# Intel thermal drivers +# CONFIG_INTEL_POWERCLAMP=m +CONFIG_X86_THERMAL_VECTOR=y CONFIG_X86_PKG_TEMP_THERMAL=m CONFIG_INTEL_SOC_DTS_IOSF_CORE=m CONFIG_INTEL_SOC_DTS_THERMAL=m + +# +# ACPI INT340X thermal drivers +# CONFIG_INT340X_THERMAL=m CONFIG_ACPI_THERMAL_REL=m +CONFIG_INT3406_THERMAL=m +CONFIG_PROC_THERMAL_MMIO_RAPL=m +# end of ACPI INT340X thermal drivers + +CONFIG_INTEL_BXT_PMIC_THERMAL=m CONFIG_INTEL_PCH_THERMAL=m +CONFIG_INTEL_TCC_COOLING=m +# end of Intel thermal drivers + +CONFIG_GENERIC_ADC_THERMAL=m CONFIG_WATCHDOG=y CONFIG_WATCHDOG_CORE=y # CONFIG_WATCHDOG_NOWAYOUT is not set +CONFIG_WATCHDOG_HANDLE_BOOT_ENABLED=y +CONFIG_WATCHDOG_OPEN_TIMEOUT=0 +CONFIG_WATCHDOG_SYSFS=y + +# +# Watchdog Pretimeout Governors +# +# CONFIG_WATCHDOG_PRETIMEOUT_GOV is not set # # Watchdog Device Drivers # CONFIG_SOFT_WATCHDOG=m CONFIG_MENF21BMC_WATCHDOG=m +CONFIG_WDAT_WDT=m # CONFIG_XILINX_WATCHDOG is not set +CONFIG_ZIIRAVE_WATCHDOG=m +CONFIG_MLX_WDT=m CONFIG_CADENCE_WATCHDOG=m CONFIG_DW_WATCHDOG=m -CONFIG_RN5T618_WATCHDOG=m CONFIG_MAX63XX_WATCHDOG=m CONFIG_RETU_WATCHDOG=m CONFIG_ACQUIRE_WDT=m CONFIG_ADVANTECH_WDT=m CONFIG_ALIM1535_WDT=m CONFIG_ALIM7101_WDT=m +CONFIG_EBC_C384_WDT=m CONFIG_F71808E_WDT=m CONFIG_SP5100_TCO=m CONFIG_SBC_FITPC2_WATCHDOG=m @@ -3974,13 +5041,16 @@ CONFIG_60XX_WDT=m CONFIG_CPU5_WDT=m CONFIG_SMSC_SCH311X_WDT=m CONFIG_SMSC37B787_WDT=m +CONFIG_TQMX86_WDT=m CONFIG_VIA_WDT=m CONFIG_W83627HF_WDT=m CONFIG_W83877F_WDT=m CONFIG_W83977F_WDT=m CONFIG_MACHZ_WDT=m CONFIG_SBC_EPX_C3_WATCHDOG=m -CONFIG_BCM7038_WDT=m +CONFIG_INTEL_MEI_WDT=m +CONFIG_NI903X_WDT=m +CONFIG_NIC7018_WDT=m CONFIG_MEN_A21_WDT=m # CONFIG_XEN_WDT is not set @@ -3995,10 +5065,6 @@ CONFIG_WDTPCI=m # CONFIG_USBPCWATCHDOG=m CONFIG_SSB_POSSIBLE=y - -# -# Sonics Silicon Backplane -# CONFIG_SSB=m CONFIG_SSB_SPROM=y CONFIG_SSB_BLOCKIO=y @@ -4009,17 +5075,10 @@ CONFIG_SSB_PCMCIAHOST_POSSIBLE=y CONFIG_SSB_PCMCIAHOST=y CONFIG_SSB_SDIOHOST_POSSIBLE=y CONFIG_SSB_SDIOHOST=y -CONFIG_SSB_HOST_SOC=y -# CONFIG_SSB_SILENT is not set -# CONFIG_SSB_DEBUG is not set CONFIG_SSB_DRIVER_PCICORE_POSSIBLE=y CONFIG_SSB_DRIVER_PCICORE=y # CONFIG_SSB_DRIVER_GPIO is not set CONFIG_BCMA_POSSIBLE=y - -# -# Broadcom specific AMBA -# CONFIG_BCMA=m CONFIG_BCMA_BLOCKIO=y CONFIG_BCMA_HOST_PCI_POSSIBLE=y @@ -4035,22 +5094,43 @@ CONFIG_BCMA_DRIVER_PCI=y # CONFIG_MFD_CORE=y CONFIG_MFD_BCM590XX=m -CONFIG_MFD_CROS_EC=m -CONFIG_MFD_CROS_EC_I2C=m +CONFIG_MFD_BD9571MWV=m +# CONFIG_MFD_AXP20X_I2C is not set +CONFIG_MFD_CROS_EC_DEV=m +# CONFIG_MFD_MADERA is not set +# CONFIG_MFD_DA9052_SPI is not set +# CONFIG_MFD_DA9062 is not set +# CONFIG_MFD_DA9063 is not set +# CONFIG_MFD_DA9150 is not set CONFIG_MFD_DLN2=m CONFIG_MFD_MC13XXX=m +# CONFIG_MFD_MC13XXX_SPI is not set CONFIG_MFD_MC13XXX_I2C=m +# CONFIG_MFD_MP2629 is not set CONFIG_HTC_PASIC3=m CONFIG_MFD_INTEL_QUARK_I2C_GPIO=m CONFIG_LPC_ICH=m CONFIG_LPC_SCH=m +CONFIG_INTEL_SOC_PMIC_BXTWC=m +CONFIG_INTEL_SOC_PMIC_CHTDC_TI=m +CONFIG_INTEL_SOC_PMIC_MRFLD=m CONFIG_MFD_INTEL_LPSS=m CONFIG_MFD_INTEL_LPSS_ACPI=m CONFIG_MFD_INTEL_LPSS_PCI=m +CONFIG_MFD_INTEL_PMC_BXT=m +CONFIG_MFD_INTEL_PMT=m +# CONFIG_MFD_IQS62X is not set CONFIG_MFD_JANZ_CMODIO=m # CONFIG_MFD_KEMPLD is not set +# CONFIG_MFD_88PM800 is not set +# CONFIG_MFD_88PM805 is not set +# CONFIG_MFD_MAX14577 is not set +# CONFIG_MFD_MAX77693 is not set +# CONFIG_MFD_MAX8907 is not set +# CONFIG_MFD_MT6360 is not set CONFIG_MFD_MT6397=m CONFIG_MFD_MENF21BMC=m +# CONFIG_EZX_PCAP is not set CONFIG_MFD_VIPERBOARD=m CONFIG_MFD_RETU=m CONFIG_MFD_PCF50633=m @@ -4058,117 +5138,103 @@ CONFIG_PCF50633_ADC=m CONFIG_PCF50633_GPIO=m CONFIG_UCB1400_CORE=m CONFIG_MFD_RDC321X=m -CONFIG_MFD_RTSX_PCI=m -CONFIG_MFD_RTSX_USB=m -CONFIG_MFD_RN5T618=m +# CONFIG_MFD_RT5033 is not set CONFIG_MFD_SI476X_CORE=m CONFIG_MFD_SM501=m # CONFIG_MFD_SM501_GPIO is not set CONFIG_MFD_SKY81452=m -# CONFIG_ABX500_CORE is not set CONFIG_MFD_SYSCON=y CONFIG_MFD_TI_AM335X_TSCADC=m CONFIG_MFD_LP3943=m +CONFIG_MFD_TI_LMU=m CONFIG_TPS6105X=m CONFIG_TPS65010=m CONFIG_TPS6507X=m -CONFIG_MFD_TPS65217=m -CONFIG_MFD_TPS65218=m -# CONFIG_MFD_TPS65912 is not set +# CONFIG_MFD_TPS65086 is not set +# CONFIG_MFD_TI_LP873X is not set +# CONFIG_MFD_TPS65912_I2C is not set +# CONFIG_MFD_TPS65912_SPI is not set CONFIG_MFD_WL1273_CORE=m CONFIG_MFD_LM3533=m -# CONFIG_MFD_TMIO is not set +# CONFIG_MFD_TQMX86 is not set CONFIG_MFD_VX855=m CONFIG_MFD_ARIZONA=y CONFIG_MFD_ARIZONA_I2C=m +# CONFIG_MFD_ARIZONA_SPI is not set +# CONFIG_MFD_CS47L24 is not set CONFIG_MFD_WM5102=y CONFIG_MFD_WM5110=y CONFIG_MFD_WM8997=y # CONFIG_MFD_WM8998 is not set +# CONFIG_MFD_WM831X_SPI is not set CONFIG_MFD_WM8994=m +CONFIG_MFD_ATC260X=m +CONFIG_MFD_ATC260X_I2C=m +# CONFIG_RAVE_SP_CORE is not set +CONFIG_MFD_INTEL_M10_BMC=m +# end of Multifunction device drivers + CONFIG_REGULATOR=y # CONFIG_REGULATOR_DEBUG is not set CONFIG_REGULATOR_FIXED_VOLTAGE=m # CONFIG_REGULATOR_VIRTUAL_CONSUMER is not set CONFIG_REGULATOR_USERSPACE_CONSUMER=m +# CONFIG_REGULATOR_88PG86X is not set CONFIG_REGULATOR_ACT8865=m CONFIG_REGULATOR_AD5398=m -CONFIG_REGULATOR_ANATOP=m +# CONFIG_REGULATOR_ARIZONA_LDO1 is not set +# CONFIG_REGULATOR_ARIZONA_MICSUPP is not set +# CONFIG_REGULATOR_ATC260X is not set CONFIG_REGULATOR_BCM590XX=m +CONFIG_REGULATOR_BD9571MWV=m CONFIG_REGULATOR_DA9210=m CONFIG_REGULATOR_DA9211=m CONFIG_REGULATOR_FAN53555=m CONFIG_REGULATOR_GPIO=m CONFIG_REGULATOR_ISL9305=m CONFIG_REGULATOR_ISL6271A=m +CONFIG_REGULATOR_LM363X=m CONFIG_REGULATOR_LP3971=m CONFIG_REGULATOR_LP3972=m CONFIG_REGULATOR_LP872X=m CONFIG_REGULATOR_LP8755=m CONFIG_REGULATOR_LTC3589=m +CONFIG_REGULATOR_LTC3676=m CONFIG_REGULATOR_MAX1586=m CONFIG_REGULATOR_MAX8649=m CONFIG_REGULATOR_MAX8660=m CONFIG_REGULATOR_MAX8952=m -CONFIG_REGULATOR_MAX8973=m +# CONFIG_REGULATOR_MAX77826 is not set CONFIG_REGULATOR_MC13XXX_CORE=m CONFIG_REGULATOR_MC13783=m CONFIG_REGULATOR_MC13892=m +# CONFIG_REGULATOR_MP8859 is not set CONFIG_REGULATOR_MT6311=m +CONFIG_REGULATOR_MT6323=m +# CONFIG_REGULATOR_MT6358 is not set CONFIG_REGULATOR_MT6397=m +# CONFIG_REGULATOR_PCA9450 is not set CONFIG_REGULATOR_PCF50633=m -CONFIG_REGULATOR_PFUZE100=m -CONFIG_REGULATOR_RN5T618=m +CONFIG_REGULATOR_PV88060=m +CONFIG_REGULATOR_PV88080=m +CONFIG_REGULATOR_PV88090=m +# CONFIG_REGULATOR_RASPBERRYPI_TOUCHSCREEN_ATTINY is not set +CONFIG_REGULATOR_RT4801=m +CONFIG_REGULATOR_RTMV20=m CONFIG_REGULATOR_SKY81452=m +CONFIG_REGULATOR_SLG51000=m CONFIG_REGULATOR_TPS51632=m CONFIG_REGULATOR_TPS6105X=m CONFIG_REGULATOR_TPS62360=m CONFIG_REGULATOR_TPS65023=m CONFIG_REGULATOR_TPS6507X=m -CONFIG_REGULATOR_TPS65217=m +CONFIG_REGULATOR_TPS65132=m +# CONFIG_REGULATOR_TPS6524X is not set CONFIG_REGULATOR_WM8994=m -CONFIG_MEDIA_SUPPORT=m - -# -# Multimedia core support -# -CONFIG_MEDIA_CAMERA_SUPPORT=y -CONFIG_MEDIA_ANALOG_TV_SUPPORT=y -CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y -CONFIG_MEDIA_RADIO_SUPPORT=y -# CONFIG_MEDIA_SDR_SUPPORT is not set -CONFIG_MEDIA_RC_SUPPORT=y -# CONFIG_MEDIA_CONTROLLER is not set -CONFIG_VIDEO_DEV=m -CONFIG_VIDEO_V4L2=m -# CONFIG_VIDEO_ADV_DEBUG is not set -# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set -CONFIG_VIDEO_TUNER=m -CONFIG_V4L2_MEM2MEM_DEV=m -CONFIG_VIDEOBUF_GEN=m -CONFIG_VIDEOBUF_DMA_SG=m -CONFIG_VIDEOBUF_VMALLOC=m -CONFIG_VIDEOBUF_DVB=m -CONFIG_VIDEOBUF2_CORE=m -CONFIG_VIDEOBUF2_MEMOPS=m -CONFIG_VIDEOBUF2_DMA_CONTIG=m -CONFIG_VIDEOBUF2_VMALLOC=m -CONFIG_VIDEOBUF2_DMA_SG=m -CONFIG_VIDEOBUF2_DVB=m -CONFIG_DVB_CORE=m -CONFIG_DVB_NET=y -CONFIG_TTPCI_EEPROM=m -CONFIG_DVB_MAX_ADAPTERS=8 -# CONFIG_DVB_DYNAMIC_MINORS is not set - -# -# Media drivers -# CONFIG_RC_CORE=m CONFIG_RC_MAP=m +CONFIG_LIRC=y CONFIG_RC_DECODERS=y -CONFIG_LIRC=m -CONFIG_IR_LIRC_CODEC=m CONFIG_IR_NEC_DECODER=m CONFIG_IR_RC5_DECODER=m CONFIG_IR_RC6_DECODER=m @@ -4178,11 +5244,13 @@ CONFIG_IR_SANYO_DECODER=m CONFIG_IR_SHARP_DECODER=m CONFIG_IR_MCE_KBD_DECODER=m CONFIG_IR_XMP_DECODER=m +CONFIG_IR_IMON_DECODER=m +CONFIG_IR_RCMM_DECODER=m CONFIG_RC_DEVICES=y CONFIG_RC_ATI_REMOTE=m CONFIG_IR_ENE=m -CONFIG_IR_HIX5HD2=m CONFIG_IR_IMON=m +CONFIG_IR_IMON_RAW=m CONFIG_IR_MCEUSB=m CONFIG_IR_ITE_CIR=m CONFIG_IR_FINTEK=m @@ -4194,7 +5262,83 @@ CONFIG_IR_IGORPLUGUSB=m CONFIG_IR_IGUANA=m CONFIG_IR_TTUSBIR=m CONFIG_RC_LOOPBACK=m -CONFIG_IR_GPIO_CIR=m +CONFIG_IR_SERIAL=m +CONFIG_IR_SERIAL_TRANSMITTER=y +CONFIG_IR_SIR=m +CONFIG_RC_XBOX_DVD=m +CONFIG_IR_TOY=m +CONFIG_CEC_CORE=m +CONFIG_CEC_NOTIFIER=y +CONFIG_MEDIA_CEC_RC=y +CONFIG_MEDIA_CEC_SUPPORT=y +CONFIG_CEC_CH7322=m +CONFIG_CEC_CROS_EC=m +CONFIG_CEC_SECO=m +CONFIG_CEC_SECO_RC=y +CONFIG_USB_PULSE8_CEC=m +CONFIG_USB_RAINSHADOW_CEC=m +CONFIG_MEDIA_SUPPORT=m +CONFIG_MEDIA_SUPPORT_FILTER=y +CONFIG_MEDIA_SUBDRV_AUTOSELECT=y + +# +# Media device types +# +CONFIG_MEDIA_CAMERA_SUPPORT=y +CONFIG_MEDIA_ANALOG_TV_SUPPORT=y +CONFIG_MEDIA_DIGITAL_TV_SUPPORT=y +CONFIG_MEDIA_RADIO_SUPPORT=y +# CONFIG_MEDIA_SDR_SUPPORT is not set +CONFIG_MEDIA_PLATFORM_SUPPORT=y +# CONFIG_MEDIA_TEST_SUPPORT is not set +# end of Media device types + +CONFIG_VIDEO_DEV=m +CONFIG_MEDIA_CONTROLLER=y +CONFIG_DVB_CORE=m + +# +# Video4Linux options +# +CONFIG_VIDEO_V4L2=m +CONFIG_VIDEO_V4L2_I2C=y +CONFIG_VIDEO_V4L2_SUBDEV_API=y +# CONFIG_VIDEO_ADV_DEBUG is not set +# CONFIG_VIDEO_FIXED_MINOR_RANGES is not set +CONFIG_VIDEO_TUNER=m +CONFIG_V4L2_MEM2MEM_DEV=m +CONFIG_V4L2_FLASH_LED_CLASS=m +CONFIG_V4L2_FWNODE=m +CONFIG_VIDEOBUF_GEN=m +CONFIG_VIDEOBUF_DMA_SG=m +CONFIG_VIDEOBUF_VMALLOC=m +# end of Video4Linux options + +# +# Media controller options +# +CONFIG_MEDIA_CONTROLLER_DVB=y +# end of Media controller options + +# +# Digital TV options +# +# CONFIG_DVB_MMAP is not set +CONFIG_DVB_NET=y +CONFIG_DVB_MAX_ADAPTERS=8 +# CONFIG_DVB_DYNAMIC_MINORS is not set +# CONFIG_DVB_DEMUX_SECTION_LOSS_LOG is not set +# CONFIG_DVB_ULE_DEBUG is not set +# end of Digital TV options + +# +# Media drivers +# + +# +# Drivers filtered as selected at 'Filter media drivers' +# +CONFIG_TTPCI_EEPROM=m CONFIG_MEDIA_USB_SUPPORT=y # @@ -4269,9 +5413,7 @@ CONFIG_VIDEO_PVRUSB2_SYSFS=y CONFIG_VIDEO_PVRUSB2_DVB=y # CONFIG_VIDEO_PVRUSB2_DEBUGIFC is not set CONFIG_VIDEO_HDPVR=m -CONFIG_VIDEO_USBVISION=m CONFIG_VIDEO_STK1160_COMMON=m -CONFIG_VIDEO_STK1160_AC97=y CONFIG_VIDEO_STK1160=m # CONFIG_VIDEO_GO7007 is not set @@ -4294,6 +5436,7 @@ CONFIG_VIDEO_TM6000_DVB=m # CONFIG_DVB_USB=m # CONFIG_DVB_USB_DEBUG is not set +CONFIG_DVB_USB_DIB3000MC=m CONFIG_DVB_USB_A800=m CONFIG_DVB_USB_DIBUSB_MB=m # CONFIG_DVB_USB_DIBUSB_MB_FAULTY is not set @@ -4301,6 +5444,7 @@ CONFIG_DVB_USB_DIBUSB_MC=m CONFIG_DVB_USB_DIB0700=m CONFIG_DVB_USB_UMT_010=m CONFIG_DVB_USB_CXUSB=m +CONFIG_DVB_USB_CXUSB_ANALOG=y CONFIG_DVB_USB_M920X=m CONFIG_DVB_USB_DIGITV=m CONFIG_DVB_USB_VP7045=m @@ -4316,7 +5460,6 @@ CONFIG_DVB_USB_PCTV452E=m CONFIG_DVB_USB_DW2102=m CONFIG_DVB_USB_CINERGY_T2=m CONFIG_DVB_USB_DTV5100=m -CONFIG_DVB_USB_FRIIO=m CONFIG_DVB_USB_AZ6027=m CONFIG_DVB_USB_TECHNISAT_USB2=m CONFIG_DVB_USB_V2=m @@ -4332,6 +5475,7 @@ CONFIG_DVB_USB_LME2510=m CONFIG_DVB_USB_MXL111SF=m CONFIG_DVB_USB_RTL28XXU=m CONFIG_DVB_USB_DVBSKY=m +CONFIG_DVB_USB_ZD1301=m CONFIG_DVB_TTUSB_BUDGET=m CONFIG_DVB_TTUSB_DEC=m CONFIG_SMS_USB_DRV=m @@ -4354,22 +5498,18 @@ CONFIG_MEDIA_PCI_SUPPORT=y # CONFIG_VIDEO_MEYE=m CONFIG_VIDEO_SOLO6X10=m +# CONFIG_VIDEO_TW5864 is not set CONFIG_VIDEO_TW68=m -CONFIG_VIDEO_ZORAN=m -CONFIG_VIDEO_ZORAN_DC30=m -CONFIG_VIDEO_ZORAN_ZR36060=m -CONFIG_VIDEO_ZORAN_BUZ=m -CONFIG_VIDEO_ZORAN_DC10=m -CONFIG_VIDEO_ZORAN_LML33=m -CONFIG_VIDEO_ZORAN_LML33R10=m -CONFIG_VIDEO_ZORAN_AVS6EYES=m +CONFIG_VIDEO_TW686X=m # # Media capture/analog TV support # CONFIG_VIDEO_IVTV=m +# CONFIG_VIDEO_IVTV_DEPRECATED_IOCTLS is not set CONFIG_VIDEO_IVTV_ALSA=m CONFIG_VIDEO_FB_IVTV=m +# CONFIG_VIDEO_FB_IVTV_FORCE_PAT is not set CONFIG_VIDEO_HEXIUM_GEMINI=m CONFIG_VIDEO_HEXIUM_ORION=m CONFIG_VIDEO_MXB=m @@ -4398,6 +5538,7 @@ CONFIG_VIDEO_SAA7134_ALSA=m CONFIG_VIDEO_SAA7134_RC=y CONFIG_VIDEO_SAA7134_DVB=m CONFIG_VIDEO_SAA7164=m +# CONFIG_VIDEO_COBALT is not set # # Media digital TV PCI Adapters @@ -4421,25 +5562,11 @@ CONFIG_DVB_MANTIS=m CONFIG_DVB_HOPPER=m CONFIG_DVB_NGENE=m CONFIG_DVB_DDBRIDGE=m +# CONFIG_DVB_DDBRIDGE_MSIENABLE is not set CONFIG_DVB_SMIPCIE=m -CONFIG_V4L_PLATFORM_DRIVERS=y -CONFIG_VIDEO_CAFE_CCIC=m -CONFIG_VIDEO_VIA_CAMERA=m -CONFIG_SOC_CAMERA=m -CONFIG_SOC_CAMERA_PLATFORM=m -CONFIG_V4L_MEM2MEM_DRIVERS=y -CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m -CONFIG_VIDEO_SH_VEU=m -CONFIG_V4L_TEST_DRIVERS=y -CONFIG_VIDEO_VIVID=m -CONFIG_VIDEO_VIVID_MAX_DEVS=64 -CONFIG_VIDEO_VIM2M=m -# CONFIG_DVB_PLATFORM_DRIVERS is not set - -# -# Supported MMC/SDIO adapters -# -CONFIG_SMS_SDIO_DRV=m +# CONFIG_DVB_NETUP_UNIDVB is not set +CONFIG_VIDEO_IPU3_CIO2=m +CONFIG_CIO2_BRIDGE=y CONFIG_RADIO_ADAPTERS=y CONFIG_RADIO_TEA575X=m # CONFIG_RADIO_SI470X is not set @@ -4447,6 +5574,7 @@ CONFIG_RADIO_SI4713=m CONFIG_USB_SI4713=m CONFIG_PLATFORM_SI4713=m CONFIG_I2C_SI4713=m +# CONFIG_RADIO_SI476X is not set CONFIG_USB_MR800=m CONFIG_USB_DSBR=m CONFIG_RADIO_MAXIRADIO=m @@ -4459,17 +5587,7 @@ CONFIG_RADIO_TEA5764=m CONFIG_RADIO_SAA7706H=m CONFIG_RADIO_TEF6862=m CONFIG_RADIO_WL1273=m - -# -# Texas Instruments WL128x FM driver (ST based) -# CONFIG_RADIO_WL128X=m - -# -# Supported FireWire (IEEE 1394) Adapters -# -CONFIG_DVB_FIREDTV=m -CONFIG_DVB_FIREDTV_INPUT=y CONFIG_MEDIA_COMMON_OPTIONS=y # @@ -4478,6 +5596,13 @@ CONFIG_MEDIA_COMMON_OPTIONS=y CONFIG_VIDEO_CX2341X=m CONFIG_VIDEO_TVEEPROM=m CONFIG_CYPRESS_FIRMWARE=m +CONFIG_VIDEOBUF2_CORE=m +CONFIG_VIDEOBUF2_V4L2=m +CONFIG_VIDEOBUF2_MEMOPS=m +CONFIG_VIDEOBUF2_DMA_CONTIG=m +CONFIG_VIDEOBUF2_VMALLOC=m +CONFIG_VIDEOBUF2_DMA_SG=m +CONFIG_VIDEOBUF2_DVB=m CONFIG_DVB_B2C2_FLEXCOP=m CONFIG_DVB_B2C2_FLEXCOP_DEBUG=y CONFIG_VIDEO_SAA7146=m @@ -4485,12 +5610,35 @@ CONFIG_VIDEO_SAA7146_VV=m CONFIG_SMS_SIANO_MDTV=m CONFIG_SMS_SIANO_RC=y # CONFIG_SMS_SIANO_DEBUGFS is not set +CONFIG_V4L_PLATFORM_DRIVERS=y +CONFIG_VIDEO_CAFE_CCIC=m +CONFIG_VIDEO_VIA_CAMERA=m +# CONFIG_VIDEO_CADENCE is not set +# CONFIG_VIDEO_ASPEED is not set +CONFIG_V4L_MEM2MEM_DRIVERS=y +CONFIG_VIDEO_MEM2MEM_DEINTERLACE=m +# CONFIG_DVB_PLATFORM_DRIVERS is not set # -# Media ancillary drivers (tuners, sensors, i2c, frontends) +# MMC/SDIO DVB adapters +# +CONFIG_SMS_SDIO_DRV=m + +# +# FireWire (IEEE 1394) Adapters +# +CONFIG_DVB_FIREDTV=m +CONFIG_DVB_FIREDTV_INPUT=y +# end of Media drivers + +# +# Media ancillary drivers # -CONFIG_MEDIA_SUBDRV_AUTOSELECT=y CONFIG_MEDIA_ATTACH=y + +# +# IR I2C driver auto-selected by 'Autoselect ancillary drivers' +# CONFIG_VIDEO_IR_I2C=m # @@ -4499,30 +5647,52 @@ CONFIG_VIDEO_IR_I2C=m CONFIG_VIDEO_TVAUDIO=m CONFIG_VIDEO_TDA7432=m CONFIG_VIDEO_TDA9840=m +# CONFIG_VIDEO_TDA1997X is not set CONFIG_VIDEO_TEA6415C=m CONFIG_VIDEO_TEA6420=m CONFIG_VIDEO_MSP3400=m +CONFIG_VIDEO_CS3308=m CONFIG_VIDEO_CS5345=m CONFIG_VIDEO_CS53L32A=m +CONFIG_VIDEO_TLV320AIC23B=m +CONFIG_VIDEO_UDA1342=m CONFIG_VIDEO_WM8775=m CONFIG_VIDEO_WM8739=m CONFIG_VIDEO_VP27SMPX=m +CONFIG_VIDEO_SONY_BTF_MPX=m +# end of Audio decoders, processors and mixers # # RDS decoders # CONFIG_VIDEO_SAA6588=m +# end of RDS decoders # # Video decoders # +CONFIG_VIDEO_ADV7180=m +CONFIG_VIDEO_ADV7183=m +CONFIG_VIDEO_ADV7604=m +CONFIG_VIDEO_ADV7604_CEC=y +CONFIG_VIDEO_ADV7842=m +CONFIG_VIDEO_ADV7842_CEC=y CONFIG_VIDEO_BT819=m CONFIG_VIDEO_BT856=m CONFIG_VIDEO_BT866=m CONFIG_VIDEO_KS0127=m +CONFIG_VIDEO_ML86V7667=m CONFIG_VIDEO_SAA7110=m CONFIG_VIDEO_SAA711X=m +CONFIG_VIDEO_TC358743=m +CONFIG_VIDEO_TC358743_CEC=y +CONFIG_VIDEO_TVP514X=m CONFIG_VIDEO_TVP5150=m +CONFIG_VIDEO_TVP7002=m +CONFIG_VIDEO_TW2804=m +CONFIG_VIDEO_TW9903=m +CONFIG_VIDEO_TW9906=m +CONFIG_VIDEO_TW9910=m CONFIG_VIDEO_VPX3220=m # @@ -4530,6 +5700,7 @@ CONFIG_VIDEO_VPX3220=m # CONFIG_VIDEO_SAA717X=m CONFIG_VIDEO_CX25840=m +# end of Video decoders # # Video encoders @@ -4538,62 +5709,148 @@ CONFIG_VIDEO_SAA7127=m CONFIG_VIDEO_SAA7185=m CONFIG_VIDEO_ADV7170=m CONFIG_VIDEO_ADV7175=m - -# -# Camera sensor devices -# -CONFIG_VIDEO_OV7670=m -CONFIG_VIDEO_MT9V011=m - -# -# Flash devices -# +CONFIG_VIDEO_ADV7343=m +CONFIG_VIDEO_ADV7393=m +CONFIG_VIDEO_ADV7511=m +CONFIG_VIDEO_ADV7511_CEC=y +CONFIG_VIDEO_AD9389B=m +CONFIG_VIDEO_AK881X=m +CONFIG_VIDEO_THS8200=m +# end of Video encoders # # Video improvement chips # CONFIG_VIDEO_UPD64031A=m CONFIG_VIDEO_UPD64083=m +# end of Video improvement chips # # Audio/Video compression chips # CONFIG_VIDEO_SAA6752HS=m +# end of Audio/Video compression chips + +# +# SDR tuner chips +# +# end of SDR tuner chips # # Miscellaneous helper chips # +# CONFIG_VIDEO_THS7303 is not set CONFIG_VIDEO_M52790=m +# CONFIG_VIDEO_I2C is not set +# CONFIG_VIDEO_ST_MIPID02 is not set +# end of Miscellaneous helper chips + +# +# Camera sensor devices +# +CONFIG_VIDEO_APTINA_PLL=m +CONFIG_VIDEO_CCS_PLL=m +CONFIG_VIDEO_HI556=m +CONFIG_VIDEO_IMX214=m +CONFIG_VIDEO_IMX219=m +CONFIG_VIDEO_IMX258=m +CONFIG_VIDEO_IMX274=m +CONFIG_VIDEO_IMX290=m +CONFIG_VIDEO_IMX319=m +CONFIG_VIDEO_IMX355=m +CONFIG_VIDEO_OV02A10=m +CONFIG_VIDEO_OV2640=m +CONFIG_VIDEO_OV2659=m +CONFIG_VIDEO_OV2680=m +CONFIG_VIDEO_OV2685=m +CONFIG_VIDEO_OV2740=m +CONFIG_VIDEO_OV5647=m +CONFIG_VIDEO_OV5648=m +CONFIG_VIDEO_OV6650=m +CONFIG_VIDEO_OV5670=m +CONFIG_VIDEO_OV5675=m +CONFIG_VIDEO_OV5695=m +CONFIG_VIDEO_OV7251=m +CONFIG_VIDEO_OV772X=m +CONFIG_VIDEO_OV7640=m +CONFIG_VIDEO_OV7670=m +CONFIG_VIDEO_OV7740=m +CONFIG_VIDEO_OV8856=m +CONFIG_VIDEO_OV8865=m +CONFIG_VIDEO_OV9640=m +CONFIG_VIDEO_OV9650=m +CONFIG_VIDEO_OV9734=m +CONFIG_VIDEO_OV13858=m +CONFIG_VIDEO_VS6624=m +CONFIG_VIDEO_MT9M001=m +CONFIG_VIDEO_MT9M032=m +CONFIG_VIDEO_MT9M111=m +CONFIG_VIDEO_MT9P031=m +CONFIG_VIDEO_MT9T001=m +CONFIG_VIDEO_MT9T112=m +CONFIG_VIDEO_MT9V011=m +CONFIG_VIDEO_MT9V032=m +CONFIG_VIDEO_MT9V111=m +CONFIG_VIDEO_SR030PC30=m +CONFIG_VIDEO_NOON010PC30=m +CONFIG_VIDEO_M5MOLS=m +CONFIG_VIDEO_MAX9271_LIB=m +CONFIG_VIDEO_RDACM20=m +CONFIG_VIDEO_RDACM21=m +CONFIG_VIDEO_RJ54N1=m +CONFIG_VIDEO_S5K6AA=m +CONFIG_VIDEO_S5K6A3=m +CONFIG_VIDEO_S5K4ECGX=m +CONFIG_VIDEO_S5K5BAF=m +CONFIG_VIDEO_CCS=m +CONFIG_VIDEO_ET8EK8=m +# CONFIG_VIDEO_S5C73M3 is not set +# end of Camera sensor devices + +# +# Lens drivers +# +CONFIG_VIDEO_AD5820=m +CONFIG_VIDEO_AK7375=m +CONFIG_VIDEO_DW9714=m +CONFIG_VIDEO_DW9768=m +CONFIG_VIDEO_DW9807_VCM=m +# end of Lens drivers # -# Sensors used on soc_camera driver +# Flash devices # +# CONFIG_VIDEO_ADP1653 is not set +# CONFIG_VIDEO_LM3560 is not set +# CONFIG_VIDEO_LM3646 is not set +# end of Flash devices # -# soc_camera sensor drivers +# SPI helper chips +# +# CONFIG_VIDEO_GS1662 is not set +# end of SPI helper chips + # -CONFIG_SOC_CAMERA_IMX074=m -CONFIG_SOC_CAMERA_MT9M001=m -CONFIG_SOC_CAMERA_MT9M111=m -CONFIG_SOC_CAMERA_MT9T031=m -CONFIG_SOC_CAMERA_MT9T112=m -CONFIG_SOC_CAMERA_MT9V022=m -CONFIG_SOC_CAMERA_OV2640=m -CONFIG_SOC_CAMERA_OV5642=m -CONFIG_SOC_CAMERA_OV6650=m -CONFIG_SOC_CAMERA_OV772X=m -CONFIG_SOC_CAMERA_OV9640=m -CONFIG_SOC_CAMERA_OV9740=m -CONFIG_SOC_CAMERA_RJ54N1=m -CONFIG_SOC_CAMERA_TW9910=m +# Media SPI Adapters +# +# CONFIG_CXD2880_SPI_DRV is not set +# end of Media SPI Adapters + CONFIG_MEDIA_TUNER=m + +# +# Customize TV tuners +# CONFIG_MEDIA_TUNER_SIMPLE=m +CONFIG_MEDIA_TUNER_TDA18250=m CONFIG_MEDIA_TUNER_TDA8290=m CONFIG_MEDIA_TUNER_TDA827X=m CONFIG_MEDIA_TUNER_TDA18271=m CONFIG_MEDIA_TUNER_TDA9887=m CONFIG_MEDIA_TUNER_TEA5761=m CONFIG_MEDIA_TUNER_TEA5767=m +# CONFIG_MEDIA_TUNER_MSI001 is not set CONFIG_MEDIA_TUNER_MT20XX=m CONFIG_MEDIA_TUNER_MT2060=m CONFIG_MEDIA_TUNER_MT2063=m @@ -4621,6 +5878,12 @@ CONFIG_MEDIA_TUNER_IT913X=m CONFIG_MEDIA_TUNER_R820T=m CONFIG_MEDIA_TUNER_MXL301RF=m CONFIG_MEDIA_TUNER_QM1D1C0042=m +CONFIG_MEDIA_TUNER_QM1D1B0004=m +# end of Customize TV tuners + +# +# Customise DVB Frontends +# # # Multistandard (satellite) frontends @@ -4628,7 +5891,10 @@ CONFIG_MEDIA_TUNER_QM1D1C0042=m CONFIG_DVB_STB0899=m CONFIG_DVB_STB6100=m CONFIG_DVB_STV090x=m +CONFIG_DVB_STV0910=m CONFIG_DVB_STV6110x=m +CONFIG_DVB_STV6111=m +CONFIG_DVB_MXL5XX=m CONFIG_DVB_M88DS3103=m # @@ -4637,6 +5903,8 @@ CONFIG_DVB_M88DS3103=m CONFIG_DVB_DRXK=m CONFIG_DVB_TDA18271C2DD=m CONFIG_DVB_SI2165=m +CONFIG_DVB_MN88472=m +CONFIG_DVB_MN88473=m # # DVB-S (satellite) frontends @@ -4676,6 +5944,7 @@ CONFIG_DVB_SP8870=m CONFIG_DVB_SP887X=m CONFIG_DVB_CX22700=m CONFIG_DVB_CX22702=m +CONFIG_DVB_S5H1432=m CONFIG_DVB_DRXD=m CONFIG_DVB_L64781=m CONFIG_DVB_TDA1004X=m @@ -4686,15 +5955,20 @@ CONFIG_DVB_DIB3000MB=m CONFIG_DVB_DIB3000MC=m CONFIG_DVB_DIB7000M=m CONFIG_DVB_DIB7000P=m +CONFIG_DVB_DIB9000=m CONFIG_DVB_TDA10048=m CONFIG_DVB_AF9013=m CONFIG_DVB_EC100=m CONFIG_DVB_STV0367=m CONFIG_DVB_CXD2820R=m +CONFIG_DVB_CXD2841ER=m CONFIG_DVB_RTL2830=m CONFIG_DVB_RTL2832=m CONFIG_DVB_SI2168=m CONFIG_DVB_AS102_FE=m +CONFIG_DVB_ZD1301_DEMOD=m +CONFIG_DVB_GP8PSK_FE=m +# CONFIG_DVB_CXD2880 is not set # # DVB-C (cable) frontends @@ -4720,6 +5994,7 @@ CONFIG_DVB_AU8522=m CONFIG_DVB_AU8522_DTV=m CONFIG_DVB_AU8522_V4L=m CONFIG_DVB_S5H1411=m +CONFIG_DVB_MXL692=m # # ISDB-T (terrestrial) frontends @@ -4732,6 +6007,7 @@ CONFIG_DVB_MB86A20S=m # ISDB-S (satellite) & ISDB-T (terrestrial) frontends # CONFIG_DVB_TC90522=m +CONFIG_DVB_MN88443X=m # # Digital terrestrial only tuners/PLL @@ -4744,24 +6020,32 @@ CONFIG_DVB_TUNER_DIB0090=m # SEC control devices for DVB-S # CONFIG_DVB_DRX39XYJ=m +CONFIG_DVB_LNBH25=m +CONFIG_DVB_LNBH29=m CONFIG_DVB_LNBP21=m CONFIG_DVB_LNBP22=m CONFIG_DVB_ISL6405=m CONFIG_DVB_ISL6421=m CONFIG_DVB_ISL6423=m CONFIG_DVB_A8293=m -CONFIG_DVB_SP2=m +CONFIG_DVB_LGS8GL5=m CONFIG_DVB_LGS8GXX=m CONFIG_DVB_ATBM8830=m CONFIG_DVB_TDA665x=m CONFIG_DVB_IX2505V=m CONFIG_DVB_M88RS2000=m CONFIG_DVB_AF9033=m +CONFIG_DVB_HORUS3A=m +CONFIG_DVB_ASCOT2E=m +CONFIG_DVB_HELENE=m # -# Tools to develop new frontends +# Common Interface (EN50221) controller drivers # -# CONFIG_DVB_DUMMY_FE is not set +CONFIG_DVB_CXD2099=m +CONFIG_DVB_SP2=m +# end of Customise DVB Frontends +# end of Media ancillary drivers # # Graphics support @@ -4776,49 +6060,116 @@ CONFIG_VGA_ARB=y CONFIG_VGA_ARB_MAX_GPUS=16 CONFIG_VGA_SWITCHEROO=y CONFIG_DRM=m +CONFIG_DRM_MIPI_DBI=m CONFIG_DRM_MIPI_DSI=y +CONFIG_DRM_DP_AUX_CHARDEV=y +# CONFIG_DRM_DEBUG_SELFTEST is not set CONFIG_DRM_KMS_HELPER=m CONFIG_DRM_KMS_FB_HELPER=y +# CONFIG_DRM_DEBUG_DP_MST_TOPOLOGY_REFS is not set CONFIG_DRM_FBDEV_EMULATION=y +CONFIG_DRM_FBDEV_OVERALLOC=100 +# CONFIG_DRM_FBDEV_LEAK_PHYS_SMEM is not set CONFIG_DRM_LOAD_EDID_FIRMWARE=y +# CONFIG_DRM_DP_CEC is not set CONFIG_DRM_TTM=m +CONFIG_DRM_VRAM_HELPER=m +CONFIG_DRM_TTM_HELPER=m +CONFIG_DRM_GEM_CMA_HELPER=y +CONFIG_DRM_KMS_CMA_HELPER=y +CONFIG_DRM_GEM_SHMEM_HELPER=y +CONFIG_DRM_SCHED=m # # I2C encoder or helper chips # -CONFIG_DRM_I2C_ADV7511=m CONFIG_DRM_I2C_CH7006=m CONFIG_DRM_I2C_SIL164=m CONFIG_DRM_I2C_NXP_TDA998X=m -CONFIG_DRM_TDFX=m -CONFIG_DRM_R128=m +# CONFIG_DRM_I2C_NXP_TDA9950 is not set +# end of I2C encoder or helper chips + +# +# ARM devices +# +# end of ARM devices + CONFIG_DRM_RADEON=m CONFIG_DRM_RADEON_USERPTR=y -# CONFIG_DRM_RADEON_UMS is not set CONFIG_DRM_AMDGPU=m -# CONFIG_DRM_AMDGPU_CIK is not set +CONFIG_DRM_AMDGPU_SI=y +CONFIG_DRM_AMDGPU_CIK=y CONFIG_DRM_AMDGPU_USERPTR=y + +# +# ACP (Audio CoProcessor) Configuration +# +CONFIG_DRM_AMD_ACP=y +# end of ACP (Audio CoProcessor) Configuration + +# +# Display Engine Configuration +# +CONFIG_DRM_AMD_DC=y +CONFIG_DRM_AMD_DC_DCN=y +CONFIG_DRM_AMD_DC_HDCP=y +CONFIG_DRM_AMD_DC_SI=y +CONFIG_DRM_AMD_SECURE_DISPLAY=y +# end of Display Engine Configuration + +CONFIG_HSA_AMD=y CONFIG_DRM_NOUVEAU=m +CONFIG_NOUVEAU_LEGACY_CTX_SUPPORT=y CONFIG_NOUVEAU_DEBUG=5 CONFIG_NOUVEAU_DEBUG_DEFAULT=3 +# CONFIG_NOUVEAU_DEBUG_MMU is not set +# CONFIG_NOUVEAU_DEBUG_PUSH is not set CONFIG_DRM_NOUVEAU_BACKLIGHT=y -CONFIG_DRM_I810=m +# CONFIG_DRM_NOUVEAU_SVM is not set CONFIG_DRM_I915=m -# CONFIG_DRM_I915_PRELIMINARY_HW_SUPPORT is not set -CONFIG_DRM_MGA=m -CONFIG_DRM_SIS=m -CONFIG_DRM_VIA=m -CONFIG_DRM_SAVAGE=m +CONFIG_DRM_I915_FORCE_PROBE="" +CONFIG_DRM_I915_CAPTURE_ERROR=y +CONFIG_DRM_I915_COMPRESS_ERROR=y +CONFIG_DRM_I915_USERPTR=y +CONFIG_DRM_I915_GVT=y +CONFIG_DRM_I915_GVT_KVMGT=m + +# +# drm/i915 Debugging +# +# CONFIG_DRM_I915_WERROR is not set +# CONFIG_DRM_I915_DEBUG is not set +# CONFIG_DRM_I915_DEBUG_MMIO is not set +# CONFIG_DRM_I915_SW_FENCE_DEBUG_OBJECTS is not set +# CONFIG_DRM_I915_SW_FENCE_CHECK_DAG is not set +# CONFIG_DRM_I915_DEBUG_GUC is not set +# CONFIG_DRM_I915_SELFTEST is not set +# CONFIG_DRM_I915_LOW_LEVEL_TRACEPOINTS is not set +# CONFIG_DRM_I915_DEBUG_VBLANK_EVADE is not set +# CONFIG_DRM_I915_DEBUG_RUNTIME_PM is not set +# end of drm/i915 Debugging + +# +# drm/i915 Profile Guided Optimisation +# +CONFIG_DRM_I915_REQUEST_TIMEOUT=20000 +CONFIG_DRM_I915_FENCE_TIMEOUT=10000 +CONFIG_DRM_I915_USERFAULT_AUTOSUSPEND=250 +CONFIG_DRM_I915_HEARTBEAT_INTERVAL=2500 +CONFIG_DRM_I915_PREEMPT_TIMEOUT=640 +CONFIG_DRM_I915_MAX_REQUEST_BUSYWAIT=8000 +CONFIG_DRM_I915_STOP_TIMEOUT=100 +CONFIG_DRM_I915_TIMESLICE_DURATION=1 +# end of drm/i915 Profile Guided Optimisation + CONFIG_DRM_VGEM=m +# CONFIG_DRM_VKMS is not set CONFIG_DRM_VMWGFX=m CONFIG_DRM_VMWGFX_FBCON=y CONFIG_DRM_GMA500=m -CONFIG_DRM_GMA600=y -CONFIG_DRM_GMA3600=y CONFIG_DRM_UDL=m CONFIG_DRM_AST=m CONFIG_DRM_MGAG200=m -CONFIG_DRM_CIRRUS_QEMU=m CONFIG_DRM_QXL=m CONFIG_DRM_BOCHS=m CONFIG_DRM_VIRTIO_GPU=m @@ -4827,25 +6178,55 @@ CONFIG_DRM_PANEL=y # # Display Panels # +CONFIG_DRM_PANEL_RASPBERRYPI_TOUCHSCREEN=m +# end of Display Panels + CONFIG_DRM_BRIDGE=y +CONFIG_DRM_PANEL_BRIDGE=y # # Display Interface Bridges # -CONFIG_HSA_AMD=m +CONFIG_DRM_ANALOGIX_ANX78XX=m +CONFIG_DRM_ANALOGIX_DP=m +# end of Display Interface Bridges + +# CONFIG_DRM_ETNAVIV is not set +CONFIG_DRM_CIRRUS_QEMU=m +CONFIG_DRM_GM12U320=m +CONFIG_TINYDRM_HX8357D=m +CONFIG_TINYDRM_ILI9225=m +CONFIG_TINYDRM_ILI9341=m +CONFIG_TINYDRM_ILI9486=m +CONFIG_TINYDRM_MI0283QT=m +CONFIG_TINYDRM_REPAPER=m +CONFIG_TINYDRM_ST7586=m +CONFIG_TINYDRM_ST7735R=m +# CONFIG_DRM_XEN_FRONTEND is not set +CONFIG_DRM_VBOXVIDEO=m +CONFIG_DRM_GUD=m +CONFIG_DRM_LEGACY=y +# CONFIG_DRM_TDFX is not set +# CONFIG_DRM_R128 is not set +# CONFIG_DRM_I810 is not set +# CONFIG_DRM_MGA is not set +# CONFIG_DRM_SIS is not set +# CONFIG_DRM_VIA is not set +# CONFIG_DRM_SAVAGE is not set +CONFIG_DRM_PANEL_ORIENTATION_QUIRKS=y # # Frame buffer Devices # +CONFIG_FB_CMDLINE=y +CONFIG_FB_NOTIFY=y CONFIG_FB=y CONFIG_FIRMWARE_EDID=y -CONFIG_FB_CMDLINE=y CONFIG_FB_DDC=m CONFIG_FB_BOOT_VESA_SUPPORT=y CONFIG_FB_CFB_FILLRECT=y CONFIG_FB_CFB_COPYAREA=y CONFIG_FB_CFB_IMAGEBLIT=y -# CONFIG_FB_CFB_REV_PIXELS_IN_BYTE is not set CONFIG_FB_SYS_FILLRECT=y CONFIG_FB_SYS_COPYAREA=y CONFIG_FB_SYS_IMAGEBLIT=y @@ -4854,8 +6235,7 @@ CONFIG_FB_SYS_FOPS=y CONFIG_FB_DEFERRED_IO=y CONFIG_FB_HECUBA=m CONFIG_FB_SVGALIB=m -# CONFIG_FB_MACMODES is not set -CONFIG_FB_BACKLIGHT=y +CONFIG_FB_BACKLIGHT=m CONFIG_FB_MODE_HELPERS=y CONFIG_FB_TILEBLITTING=y @@ -4889,7 +6269,9 @@ CONFIG_FB_RIVA_BACKLIGHT=y CONFIG_FB_I740=m CONFIG_FB_LE80578=m CONFIG_FB_CARILLO_RANCH=m -# CONFIG_FB_INTEL is not set +CONFIG_FB_INTEL=m +# CONFIG_FB_INTEL_DEBUG is not set +CONFIG_FB_INTEL_I2C=y CONFIG_FB_MATROX=m CONFIG_FB_MATROX_MILLENIUM=y CONFIG_FB_MATROX_MYSTIQUE=y @@ -4938,32 +6320,45 @@ CONFIG_FB_METRONOME=m CONFIG_FB_MB862XX=m CONFIG_FB_MB862XX_PCI_GDC=y CONFIG_FB_MB862XX_I2C=y -CONFIG_FB_BROADSHEET=m -CONFIG_FB_AUO_K190X=m -CONFIG_FB_AUO_K1900=m -CONFIG_FB_AUO_K1901=m -# CONFIG_FB_HYPERV is not set +CONFIG_FB_HYPERV=m # CONFIG_FB_SIMPLE is not set CONFIG_FB_SM712=m -CONFIG_BACKLIGHT_LCD_SUPPORT=y +# end of Frame buffer Devices + +# +# Backlight & LCD device support +# CONFIG_LCD_CLASS_DEVICE=m +# CONFIG_LCD_L4F00242T03 is not set +# CONFIG_LCD_LMS283GF05 is not set +# CONFIG_LCD_LTV350QV is not set +# CONFIG_LCD_ILI922X is not set +# CONFIG_LCD_ILI9320 is not set +# CONFIG_LCD_TDO24M is not set +# CONFIG_LCD_VGG2432A4 is not set CONFIG_LCD_PLATFORM=m +# CONFIG_LCD_AMS369FG06 is not set +# CONFIG_LCD_LMS501KF03 is not set +# CONFIG_LCD_HX8357 is not set +# CONFIG_LCD_OTM3225A is not set CONFIG_BACKLIGHT_CLASS_DEVICE=y -CONFIG_BACKLIGHT_GENERIC=m +CONFIG_BACKLIGHT_KTD253=m CONFIG_BACKLIGHT_LM3533=m CONFIG_BACKLIGHT_CARILLO_RANCH=m CONFIG_BACKLIGHT_APPLE=m -CONFIG_BACKLIGHT_PM8941_WLED=m +CONFIG_BACKLIGHT_QCOM_WLED=m CONFIG_BACKLIGHT_SAHARA=m CONFIG_BACKLIGHT_ADP8860=m CONFIG_BACKLIGHT_ADP8870=m CONFIG_BACKLIGHT_PCF50633=m CONFIG_BACKLIGHT_LM3639=m CONFIG_BACKLIGHT_SKY81452=m -CONFIG_BACKLIGHT_TPS65217=m CONFIG_BACKLIGHT_GPIO=m CONFIG_BACKLIGHT_LV5207LP=m CONFIG_BACKLIGHT_BD6107=m +CONFIG_BACKLIGHT_ARCXCNN=m +# end of Backlight & LCD device support + CONFIG_VGASTATE=m CONFIG_HDMI=y @@ -4977,29 +6372,36 @@ CONFIG_DUMMY_CONSOLE_ROWS=25 CONFIG_FRAMEBUFFER_CONSOLE=y CONFIG_FRAMEBUFFER_CONSOLE_DETECT_PRIMARY=y CONFIG_FRAMEBUFFER_CONSOLE_ROTATION=y +# CONFIG_FRAMEBUFFER_CONSOLE_DEFERRED_TAKEOVER is not set +# end of Console display driver support + CONFIG_LOGO=y # CONFIG_LOGO_LINUX_MONO is not set # CONFIG_LOGO_LINUX_VGA16 is not set CONFIG_LOGO_LINUX_CLUT224=y +# end of Graphics support + CONFIG_SOUND=m CONFIG_SOUND_OSS_CORE=y CONFIG_SOUND_OSS_CORE_PRECLAIM=y CONFIG_SND=m CONFIG_SND_TIMER=m CONFIG_SND_PCM=m +CONFIG_SND_PCM_ELD=y +CONFIG_SND_PCM_IEC958=y +CONFIG_SND_DMAENGINE_PCM=m CONFIG_SND_HWDEP=m +CONFIG_SND_SEQ_DEVICE=m CONFIG_SND_RAWMIDI=m +CONFIG_SND_COMPRESS_OFFLOAD=m CONFIG_SND_JACK=y -CONFIG_SND_SEQUENCER=m -CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_JACK_INPUT_DEV=y CONFIG_SND_OSSEMUL=y CONFIG_SND_MIXER_OSS=m CONFIG_SND_PCM_OSS=m CONFIG_SND_PCM_OSS_PLUGINS=y CONFIG_SND_PCM_TIMER=y -CONFIG_SND_SEQUENCER_OSS=y CONFIG_SND_HRTIMER=m -CONFIG_SND_SEQ_HRTIMER_DEFAULT=y CONFIG_SND_DYNAMIC_MINORS=y CONFIG_SND_MAX_CARDS=32 # CONFIG_SND_SUPPORT_OLD_API is not set @@ -5009,17 +6411,22 @@ CONFIG_SND_VERBOSE_PROCFS=y # CONFIG_SND_DEBUG is not set CONFIG_SND_VMASTER=y CONFIG_SND_DMA_SGBUF=y -CONFIG_SND_RAWMIDI_SEQ=m -CONFIG_SND_OPL3_LIB_SEQ=m -# CONFIG_SND_OPL4_LIB_SEQ is not set -# CONFIG_SND_SBAWE_SEQ is not set -CONFIG_SND_EMU10K1_SEQ=m +CONFIG_SND_CTL_LED=m +CONFIG_SND_SEQUENCER=m +CONFIG_SND_SEQ_DUMMY=m +CONFIG_SND_SEQUENCER_OSS=m +CONFIG_SND_SEQ_HRTIMER_DEFAULT=y +CONFIG_SND_SEQ_MIDI_EVENT=m +CONFIG_SND_SEQ_MIDI=m +CONFIG_SND_SEQ_MIDI_EMUL=m +CONFIG_SND_SEQ_VIRMIDI=m CONFIG_SND_MPU401_UART=m CONFIG_SND_OPL3_LIB=m +CONFIG_SND_OPL3_LIB_SEQ=m CONFIG_SND_VX_LIB=m CONFIG_SND_AC97_CODEC=m CONFIG_SND_DRIVERS=y -# CONFIG_SND_PCSP is not set +CONFIG_SND_PCSP=m CONFIG_SND_DUMMY=m CONFIG_SND_ALOOP=m CONFIG_SND_VIRMIDI=m @@ -5069,6 +6476,7 @@ CONFIG_SND_INDIGODJ=m CONFIG_SND_INDIGOIOX=m CONFIG_SND_INDIGODJX=m CONFIG_SND_EMU10K1=m +CONFIG_SND_EMU10K1_SEQ=m CONFIG_SND_EMU10K1X=m CONFIG_SND_ENS1370=m CONFIG_SND_ENS1371=m @@ -5108,10 +6516,12 @@ CONFIG_SND_YMFPCI=m # HD-Audio # CONFIG_SND_HDA=m +CONFIG_SND_HDA_GENERIC_LEDS=y CONFIG_SND_HDA_INTEL=m CONFIG_SND_HDA_HWDEP=y CONFIG_SND_HDA_RECONFIG=y -# CONFIG_SND_HDA_INPUT_BEEP is not set +CONFIG_SND_HDA_INPUT_BEEP=y +CONFIG_SND_HDA_INPUT_BEEP_MODE=0 CONFIG_SND_HDA_PATCH_LOADER=y CONFIG_SND_HDA_CODEC_REALTEK=m CONFIG_SND_HDA_CODEC_ANALOG=m @@ -5127,12 +6537,23 @@ CONFIG_SND_HDA_CODEC_CMEDIA=m CONFIG_SND_HDA_CODEC_SI3054=m CONFIG_SND_HDA_GENERIC=m CONFIG_SND_HDA_POWER_SAVE_DEFAULT=0 +CONFIG_SND_HDA_INTEL_HDMI_SILENT_STREAM=y +# end of HD-Audio + CONFIG_SND_HDA_CORE=m CONFIG_SND_HDA_DSP_LOADER=y +CONFIG_SND_HDA_COMPONENT=y CONFIG_SND_HDA_I915=y -CONFIG_SND_HDA_PREALLOC_SIZE=2048 +CONFIG_SND_HDA_EXT_CORE=m +CONFIG_SND_HDA_PREALLOC_SIZE=0 +CONFIG_SND_INTEL_NHLT=y +CONFIG_SND_INTEL_DSP_CONFIG=m +CONFIG_SND_INTEL_SOUNDWIRE_ACPI=m +# CONFIG_SND_INTEL_BYT_PREFER_SOF is not set +CONFIG_SND_SPI=y CONFIG_SND_USB=y CONFIG_SND_USB_AUDIO=m +CONFIG_SND_USB_AUDIO_USE_MEDIA_CONTROLLER=y CONFIG_SND_USB_UA101=m CONFIG_SND_USB_USX2Y=m CONFIG_SND_USB_CAIAQ=m @@ -5151,16 +6572,388 @@ CONFIG_SND_FIREWIRE_LIB=m CONFIG_SND_DICE=m CONFIG_SND_OXFW=m CONFIG_SND_ISIGHT=m -CONFIG_SND_SCS1X=m CONFIG_SND_FIREWORKS=m CONFIG_SND_BEBOB=m CONFIG_SND_FIREWIRE_DIGI00X=m CONFIG_SND_FIREWIRE_TASCAM=m +CONFIG_SND_FIREWIRE_MOTU=m +CONFIG_SND_FIREFACE=m CONFIG_SND_PCMCIA=y CONFIG_SND_VXPOCKET=m CONFIG_SND_PDAUDIOCF=m -# CONFIG_SND_SOC is not set -# CONFIG_SOUND_PRIME is not set +CONFIG_SND_SOC=m +CONFIG_SND_SOC_AC97_BUS=y +CONFIG_SND_SOC_GENERIC_DMAENGINE_PCM=y +CONFIG_SND_SOC_COMPRESS=y +CONFIG_SND_SOC_TOPOLOGY=y +CONFIG_SND_SOC_ACPI=m +CONFIG_SND_SOC_ADI=m +CONFIG_SND_SOC_ADI_AXI_I2S=m +CONFIG_SND_SOC_ADI_AXI_SPDIF=m +CONFIG_SND_SOC_AMD_ACP=m +CONFIG_SND_SOC_AMD_CZ_DA7219MX98357_MACH=m +CONFIG_SND_SOC_AMD_CZ_RT5645_MACH=m +CONFIG_SND_SOC_AMD_ACP3x=m +CONFIG_SND_SOC_AMD_RV_RT5682_MACH=m +CONFIG_SND_SOC_AMD_RENOIR=m +CONFIG_SND_SOC_AMD_RENOIR_MACH=m +# CONFIG_SND_ATMEL_SOC is not set +# CONFIG_SND_BCM63XX_I2S_WHISTLER is not set +CONFIG_SND_DESIGNWARE_I2S=m +CONFIG_SND_DESIGNWARE_PCM=y + +# +# SoC Audio for Freescale CPUs +# + +# +# Common SoC Audio options for Freescale CPUs: +# +# CONFIG_SND_SOC_FSL_ASRC is not set +# CONFIG_SND_SOC_FSL_SAI is not set +# CONFIG_SND_SOC_FSL_AUDMIX is not set +# CONFIG_SND_SOC_FSL_SSI is not set +# CONFIG_SND_SOC_FSL_SPDIF is not set +# CONFIG_SND_SOC_FSL_ESAI is not set +# CONFIG_SND_SOC_FSL_MICFIL is not set +# CONFIG_SND_SOC_FSL_XCVR is not set +# CONFIG_SND_SOC_FSL_RPMSG is not set +# CONFIG_SND_SOC_IMX_AUDMUX is not set +# end of SoC Audio for Freescale CPUs + +CONFIG_SND_I2S_HI6210_I2S=m +# CONFIG_SND_SOC_IMG is not set +CONFIG_SND_SOC_INTEL_SST_TOPLEVEL=y +CONFIG_SND_SOC_INTEL_SST=m +CONFIG_SND_SOC_INTEL_CATPT=m +CONFIG_SND_SST_ATOM_HIFI2_PLATFORM=m +CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_PCI=m +CONFIG_SND_SST_ATOM_HIFI2_PLATFORM_ACPI=m +CONFIG_SND_SOC_INTEL_SKYLAKE=m +CONFIG_SND_SOC_INTEL_SKL=m +CONFIG_SND_SOC_INTEL_APL=m +CONFIG_SND_SOC_INTEL_KBL=m +CONFIG_SND_SOC_INTEL_GLK=m +CONFIG_SND_SOC_INTEL_CNL=m +CONFIG_SND_SOC_INTEL_CFL=m +CONFIG_SND_SOC_INTEL_CML_H=m +CONFIG_SND_SOC_INTEL_CML_LP=m +CONFIG_SND_SOC_INTEL_SKYLAKE_FAMILY=m +CONFIG_SND_SOC_INTEL_SKYLAKE_SSP_CLK=m +CONFIG_SND_SOC_INTEL_SKYLAKE_HDAUDIO_CODEC=y +CONFIG_SND_SOC_INTEL_SKYLAKE_COMMON=m +CONFIG_SND_SOC_ACPI_INTEL_MATCH=m +CONFIG_SND_SOC_INTEL_MACH=y +CONFIG_SND_SOC_INTEL_USER_FRIENDLY_LONG_NAMES=y +CONFIG_SND_SOC_INTEL_HASWELL_MACH=m +CONFIG_SND_SOC_INTEL_BDW_RT5650_MACH=m +CONFIG_SND_SOC_INTEL_BDW_RT5677_MACH=m +CONFIG_SND_SOC_INTEL_BROADWELL_MACH=m +CONFIG_SND_SOC_INTEL_BYTCR_RT5640_MACH=m +CONFIG_SND_SOC_INTEL_BYTCR_RT5651_MACH=m +CONFIG_SND_SOC_INTEL_BYTCR_WM5102_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_RT5672_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_RT5645_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_MAX98090_TI_MACH=m +CONFIG_SND_SOC_INTEL_CHT_BSW_NAU8824_MACH=m +CONFIG_SND_SOC_INTEL_BYT_CHT_CX2072X_MACH=m +CONFIG_SND_SOC_INTEL_BYT_CHT_DA7213_MACH=m +CONFIG_SND_SOC_INTEL_BYT_CHT_ES8316_MACH=m +CONFIG_SND_SOC_INTEL_BYT_CHT_NOCODEC_MACH=m +CONFIG_SND_SOC_INTEL_SKL_RT286_MACH=m +CONFIG_SND_SOC_INTEL_SKL_NAU88L25_SSM4567_MACH=m +CONFIG_SND_SOC_INTEL_SKL_NAU88L25_MAX98357A_MACH=m +CONFIG_SND_SOC_INTEL_DA7219_MAX98357A_GENERIC=m +CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_COMMON=m +CONFIG_SND_SOC_INTEL_BXT_DA7219_MAX98357A_MACH=m +CONFIG_SND_SOC_INTEL_BXT_RT298_MACH=m +CONFIG_SND_SOC_INTEL_SOF_WM8804_MACH=m +CONFIG_SND_SOC_INTEL_KBL_RT5663_MAX98927_MACH=m +CONFIG_SND_SOC_INTEL_KBL_RT5663_RT5514_MAX98927_MACH=m +CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98357A_MACH=m +CONFIG_SND_SOC_INTEL_KBL_DA7219_MAX98927_MACH=m +CONFIG_SND_SOC_INTEL_KBL_RT5660_MACH=m +CONFIG_SND_SOC_INTEL_GLK_DA7219_MAX98357A_MACH=m +CONFIG_SND_SOC_INTEL_GLK_RT5682_MAX98357A_MACH=m +CONFIG_SND_SOC_INTEL_SKL_HDA_DSP_GENERIC_MACH=m +CONFIG_SND_SOC_INTEL_SOF_RT5682_MACH=m +CONFIG_SND_SOC_INTEL_SOF_PCM512x_MACH=m +CONFIG_SND_SOC_INTEL_CML_LP_DA7219_MAX98357A_MACH=m +CONFIG_SND_SOC_INTEL_SOF_CML_RT1011_RT5682_MACH=m +CONFIG_SND_SOC_INTEL_SOF_DA7219_MAX98373_MACH=m +CONFIG_SND_SOC_INTEL_EHL_RT5660_MACH=m +CONFIG_SND_SOC_INTEL_SOUNDWIRE_SOF_MACH=m +# CONFIG_SND_SOC_MTK_BTCVSD is not set +CONFIG_SND_SOC_SOF_TOPLEVEL=y +CONFIG_SND_SOC_SOF_PCI_DEV=m +CONFIG_SND_SOC_SOF_PCI=m +CONFIG_SND_SOC_SOF_ACPI=m +CONFIG_SND_SOC_SOF_ACPI_DEV=m +# CONFIG_SND_SOC_SOF_DEBUG_PROBES is not set +# CONFIG_SND_SOC_SOF_DEVELOPER_SUPPORT is not set +CONFIG_SND_SOC_SOF=m +CONFIG_SND_SOC_SOF_PROBE_WORK_QUEUE=y +CONFIG_SND_SOC_SOF_INTEL_TOPLEVEL=y +CONFIG_SND_SOC_SOF_INTEL_HIFI_EP_IPC=m +CONFIG_SND_SOC_SOF_INTEL_ATOM_HIFI_EP=m +CONFIG_SND_SOC_SOF_INTEL_COMMON=m +CONFIG_SND_SOC_SOF_BAYTRAIL=m +CONFIG_SND_SOC_SOF_BROADWELL=m +CONFIG_SND_SOC_SOF_MERRIFIELD=m +CONFIG_SND_SOC_SOF_INTEL_APL=m +CONFIG_SND_SOC_SOF_APOLLOLAKE=m +CONFIG_SND_SOC_SOF_GEMINILAKE=m +CONFIG_SND_SOC_SOF_INTEL_CNL=m +CONFIG_SND_SOC_SOF_CANNONLAKE=m +CONFIG_SND_SOC_SOF_COFFEELAKE=m +CONFIG_SND_SOC_SOF_COMETLAKE=m +CONFIG_SND_SOC_SOF_INTEL_ICL=m +CONFIG_SND_SOC_SOF_ICELAKE=m +CONFIG_SND_SOC_SOF_JASPERLAKE=m +CONFIG_SND_SOC_SOF_INTEL_TGL=m +CONFIG_SND_SOC_SOF_TIGERLAKE=m +CONFIG_SND_SOC_SOF_ELKHARTLAKE=m +CONFIG_SND_SOC_SOF_ALDERLAKE=m +CONFIG_SND_SOC_SOF_HDA_COMMON=m +CONFIG_SND_SOC_SOF_HDA_LINK=y +CONFIG_SND_SOC_SOF_HDA_AUDIO_CODEC=y +# CONFIG_SND_SOC_SOF_HDA_ALWAYS_ENABLE_DMI_L1 is not set +CONFIG_SND_SOC_SOF_HDA_LINK_BASELINE=m +CONFIG_SND_SOC_SOF_HDA=m +CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE_LINK_BASELINE=m +CONFIG_SND_SOC_SOF_INTEL_SOUNDWIRE=m +CONFIG_SND_SOC_SOF_XTENSA=m + +# +# STMicroelectronics STM32 SOC audio support +# +# end of STMicroelectronics STM32 SOC audio support + +# CONFIG_SND_SOC_XILINX_I2S is not set +# CONFIG_SND_SOC_XILINX_AUDIO_FORMATTER is not set +# CONFIG_SND_SOC_XILINX_SPDIF is not set +# CONFIG_SND_SOC_XTFPGA_I2S is not set +CONFIG_SND_SOC_I2C_AND_SPI=m + +# +# CODEC drivers +# +CONFIG_SND_SOC_ARIZONA=m +CONFIG_SND_SOC_WM_ADSP=m +CONFIG_SND_SOC_AC97_CODEC=m +CONFIG_SND_SOC_ADAU_UTILS=m +CONFIG_SND_SOC_ADAU1372=m +CONFIG_SND_SOC_ADAU1372_I2C=m +CONFIG_SND_SOC_ADAU1372_SPI=m +# CONFIG_SND_SOC_ADAU1701 is not set +CONFIG_SND_SOC_ADAU17X1=m +CONFIG_SND_SOC_ADAU1761=m +CONFIG_SND_SOC_ADAU1761_I2C=m +CONFIG_SND_SOC_ADAU1761_SPI=m +CONFIG_SND_SOC_ADAU7002=m +CONFIG_SND_SOC_ADAU7118=m +CONFIG_SND_SOC_ADAU7118_HW=m +CONFIG_SND_SOC_ADAU7118_I2C=m +# CONFIG_SND_SOC_AK4104 is not set +# CONFIG_SND_SOC_AK4118 is not set +# CONFIG_SND_SOC_AK4458 is not set +# CONFIG_SND_SOC_AK4554 is not set +# CONFIG_SND_SOC_AK4613 is not set +# CONFIG_SND_SOC_AK4642 is not set +# CONFIG_SND_SOC_AK5386 is not set +CONFIG_SND_SOC_AK5558=m +# CONFIG_SND_SOC_ALC5623 is not set +CONFIG_SND_SOC_BD28623=m +# CONFIG_SND_SOC_BT_SCO is not set +CONFIG_SND_SOC_CROS_EC_CODEC=m +# CONFIG_SND_SOC_CS35L32 is not set +# CONFIG_SND_SOC_CS35L33 is not set +CONFIG_SND_SOC_CS35L34=m +CONFIG_SND_SOC_CS35L35=m +CONFIG_SND_SOC_CS35L36=m +CONFIG_SND_SOC_CS42L42=m +# CONFIG_SND_SOC_CS42L51_I2C is not set +# CONFIG_SND_SOC_CS42L52 is not set +# CONFIG_SND_SOC_CS42L56 is not set +# CONFIG_SND_SOC_CS42L73 is not set +CONFIG_SND_SOC_CS4234=m +# CONFIG_SND_SOC_CS4265 is not set +# CONFIG_SND_SOC_CS4270 is not set +# CONFIG_SND_SOC_CS4271_I2C is not set +# CONFIG_SND_SOC_CS4271_SPI is not set +# CONFIG_SND_SOC_CS42XX8_I2C is not set +CONFIG_SND_SOC_CS43130=m +# CONFIG_SND_SOC_CS4341 is not set +# CONFIG_SND_SOC_CS4349 is not set +# CONFIG_SND_SOC_CS53L30 is not set +CONFIG_SND_SOC_CX2072X=m +CONFIG_SND_SOC_DA7213=m +CONFIG_SND_SOC_DA7219=m +CONFIG_SND_SOC_DMIC=m +CONFIG_SND_SOC_HDMI_CODEC=m +CONFIG_SND_SOC_ES7134=m +CONFIG_SND_SOC_ES7241=m +CONFIG_SND_SOC_ES8316=m +CONFIG_SND_SOC_ES8328=m +CONFIG_SND_SOC_ES8328_I2C=m +CONFIG_SND_SOC_ES8328_SPI=m +# CONFIG_SND_SOC_GTM601 is not set +CONFIG_SND_SOC_HDAC_HDMI=m +CONFIG_SND_SOC_HDAC_HDA=m +# CONFIG_SND_SOC_INNO_RK3036 is not set +CONFIG_SND_SOC_MAX98088=m +CONFIG_SND_SOC_MAX98090=m +CONFIG_SND_SOC_MAX98357A=m +# CONFIG_SND_SOC_MAX98504 is not set +CONFIG_SND_SOC_MAX9867=m +CONFIG_SND_SOC_MAX98927=m +CONFIG_SND_SOC_MAX98373=m +CONFIG_SND_SOC_MAX98373_I2C=m +CONFIG_SND_SOC_MAX98373_SDW=m +CONFIG_SND_SOC_MAX98390=m +# CONFIG_SND_SOC_MAX9860 is not set +# CONFIG_SND_SOC_MSM8916_WCD_DIGITAL is not set +# CONFIG_SND_SOC_PCM1681 is not set +CONFIG_SND_SOC_PCM1789=m +CONFIG_SND_SOC_PCM1789_I2C=m +# CONFIG_SND_SOC_PCM179X_I2C is not set +# CONFIG_SND_SOC_PCM179X_SPI is not set +CONFIG_SND_SOC_PCM186X=m +CONFIG_SND_SOC_PCM186X_I2C=m +CONFIG_SND_SOC_PCM186X_SPI=m +CONFIG_SND_SOC_PCM3060=m +CONFIG_SND_SOC_PCM3060_I2C=m +CONFIG_SND_SOC_PCM3060_SPI=m +# CONFIG_SND_SOC_PCM3168A_I2C is not set +# CONFIG_SND_SOC_PCM3168A_SPI is not set +# CONFIG_SND_SOC_PCM5102A is not set +CONFIG_SND_SOC_PCM512x=m +CONFIG_SND_SOC_PCM512x_I2C=m +# CONFIG_SND_SOC_PCM512x_SPI is not set +# CONFIG_SND_SOC_RK3328 is not set +CONFIG_SND_SOC_RL6231=m +CONFIG_SND_SOC_RL6347A=m +CONFIG_SND_SOC_RT286=m +CONFIG_SND_SOC_RT298=m +CONFIG_SND_SOC_RT1011=m +CONFIG_SND_SOC_RT1015=m +CONFIG_SND_SOC_RT1015P=m +CONFIG_SND_SOC_RT1308=m +CONFIG_SND_SOC_RT1308_SDW=m +CONFIG_SND_SOC_RT1316_SDW=m +CONFIG_SND_SOC_RT5514=m +CONFIG_SND_SOC_RT5514_SPI=m +# CONFIG_SND_SOC_RT5616 is not set +# CONFIG_SND_SOC_RT5631 is not set +CONFIG_SND_SOC_RT5640=m +CONFIG_SND_SOC_RT5645=m +CONFIG_SND_SOC_RT5651=m +CONFIG_SND_SOC_RT5659=m +CONFIG_SND_SOC_RT5660=m +CONFIG_SND_SOC_RT5663=m +CONFIG_SND_SOC_RT5670=m +CONFIG_SND_SOC_RT5677=m +CONFIG_SND_SOC_RT5677_SPI=m +CONFIG_SND_SOC_RT5682=m +CONFIG_SND_SOC_RT5682_I2C=m +CONFIG_SND_SOC_RT5682_SDW=m +CONFIG_SND_SOC_RT700=m +CONFIG_SND_SOC_RT700_SDW=m +CONFIG_SND_SOC_RT711=m +CONFIG_SND_SOC_RT711_SDW=m +CONFIG_SND_SOC_RT711_SDCA_SDW=m +CONFIG_SND_SOC_RT715=m +CONFIG_SND_SOC_RT715_SDW=m +CONFIG_SND_SOC_RT715_SDCA_SDW=m +# CONFIG_SND_SOC_SGTL5000 is not set +CONFIG_SND_SOC_SIGMADSP=m +CONFIG_SND_SOC_SIGMADSP_REGMAP=m +CONFIG_SND_SOC_SIMPLE_AMPLIFIER=m +CONFIG_SND_SOC_SIMPLE_MUX=m +CONFIG_SND_SOC_SPDIF=m +# CONFIG_SND_SOC_SSM2305 is not set +# CONFIG_SND_SOC_SSM2602_SPI is not set +# CONFIG_SND_SOC_SSM2602_I2C is not set +CONFIG_SND_SOC_SSM4567=m +# CONFIG_SND_SOC_STA32X is not set +# CONFIG_SND_SOC_STA350 is not set +# CONFIG_SND_SOC_STI_SAS is not set +# CONFIG_SND_SOC_TAS2552 is not set +CONFIG_SND_SOC_TAS2562=m +CONFIG_SND_SOC_TAS2764=m +CONFIG_SND_SOC_TAS2770=m +# CONFIG_SND_SOC_TAS5086 is not set +# CONFIG_SND_SOC_TAS571X is not set +# CONFIG_SND_SOC_TAS5720 is not set +CONFIG_SND_SOC_TAS6424=m +CONFIG_SND_SOC_TDA7419=m +# CONFIG_SND_SOC_TFA9879 is not set +# CONFIG_SND_SOC_TLV320AIC23_I2C is not set +# CONFIG_SND_SOC_TLV320AIC23_SPI is not set +# CONFIG_SND_SOC_TLV320AIC31XX is not set +CONFIG_SND_SOC_TLV320AIC32X4=m +CONFIG_SND_SOC_TLV320AIC32X4_I2C=m +CONFIG_SND_SOC_TLV320AIC32X4_SPI=m +CONFIG_SND_SOC_TLV320AIC3X=m +CONFIG_SND_SOC_TLV320AIC3X_I2C=m +CONFIG_SND_SOC_TLV320AIC3X_SPI=m +CONFIG_SND_SOC_TLV320ADCX140=m +CONFIG_SND_SOC_TS3A227E=m +CONFIG_SND_SOC_TSCS42XX=m +# CONFIG_SND_SOC_TSCS454 is not set +# CONFIG_SND_SOC_UDA1334 is not set +CONFIG_SND_SOC_WM5102=m +# CONFIG_SND_SOC_WM8510 is not set +# CONFIG_SND_SOC_WM8523 is not set +CONFIG_SND_SOC_WM8524=m +# CONFIG_SND_SOC_WM8580 is not set +# CONFIG_SND_SOC_WM8711 is not set +# CONFIG_SND_SOC_WM8728 is not set +# CONFIG_SND_SOC_WM8731 is not set +# CONFIG_SND_SOC_WM8737 is not set +# CONFIG_SND_SOC_WM8741 is not set +# CONFIG_SND_SOC_WM8750 is not set +# CONFIG_SND_SOC_WM8753 is not set +# CONFIG_SND_SOC_WM8770 is not set +# CONFIG_SND_SOC_WM8776 is not set +# CONFIG_SND_SOC_WM8782 is not set +CONFIG_SND_SOC_WM8804=m +CONFIG_SND_SOC_WM8804_I2C=m +# CONFIG_SND_SOC_WM8804_SPI is not set +# CONFIG_SND_SOC_WM8903 is not set +# CONFIG_SND_SOC_WM8904 is not set +# CONFIG_SND_SOC_WM8960 is not set +# CONFIG_SND_SOC_WM8962 is not set +# CONFIG_SND_SOC_WM8974 is not set +# CONFIG_SND_SOC_WM8978 is not set +# CONFIG_SND_SOC_WM8985 is not set +# CONFIG_SND_SOC_WSA881X is not set +CONFIG_SND_SOC_ZL38060=m +# CONFIG_SND_SOC_ZX_AUD96P22 is not set +CONFIG_SND_SOC_MAX9759=m +# CONFIG_SND_SOC_MT6351 is not set +# CONFIG_SND_SOC_MT6358 is not set +# CONFIG_SND_SOC_MT6660 is not set +# CONFIG_SND_SOC_NAU8315 is not set +CONFIG_SND_SOC_NAU8540=m +# CONFIG_SND_SOC_NAU8810 is not set +# CONFIG_SND_SOC_NAU8822 is not set +CONFIG_SND_SOC_NAU8824=m +CONFIG_SND_SOC_NAU8825=m +# CONFIG_SND_SOC_TPA6130A2 is not set +# CONFIG_SND_SOC_LPASS_WSA_MACRO is not set +# CONFIG_SND_SOC_LPASS_VA_MACRO is not set +CONFIG_SND_SOC_LPASS_RX_MACRO=m +CONFIG_SND_SOC_LPASS_TX_MACRO=m +# end of CODEC drivers + +CONFIG_SND_SIMPLE_CARD_UTILS=m +CONFIG_SND_SIMPLE_CARD=m +CONFIG_SND_X86=y +CONFIG_HDMI_LPE_AUDIO=m +CONFIG_SND_SYNTH_EMUX=m +# CONFIG_SND_XEN_FRONTEND is not set +CONFIG_SND_VIRTIO=m CONFIG_AC97_BUS=m # @@ -5176,39 +6969,55 @@ CONFIG_HID_GENERIC=m # Special HID drivers # CONFIG_HID_A4TECH=m +CONFIG_HID_ACCUTOUCH=m CONFIG_HID_ACRUX=m CONFIG_HID_ACRUX_FF=y CONFIG_HID_APPLE=m CONFIG_HID_APPLEIR=m +CONFIG_HID_ASUS=m CONFIG_HID_AUREAL=m CONFIG_HID_BELKIN=m CONFIG_HID_BETOP_FF=m +CONFIG_HID_BIGBEN_FF=m CONFIG_HID_CHERRY=m CONFIG_HID_CHICONY=m CONFIG_HID_CORSAIR=m +CONFIG_HID_COUGAR=m +CONFIG_HID_MACALLY=m CONFIG_HID_PRODIKEYS=m +CONFIG_HID_CMEDIA=m CONFIG_HID_CP2112=m +CONFIG_HID_CREATIVE_SB0540=m CONFIG_HID_CYPRESS=m CONFIG_HID_DRAGONRISE=m CONFIG_DRAGONRISE_FF=y CONFIG_HID_EMS_FF=m +CONFIG_HID_ELAN=m CONFIG_HID_ELECOM=m CONFIG_HID_ELO=m CONFIG_HID_EZKEY=m +CONFIG_HID_FT260=m CONFIG_HID_GEMBIRD=m CONFIG_HID_GFRM=m +CONFIG_HID_GLORIOUS=m CONFIG_HID_HOLTEK=m CONFIG_HOLTEK_FF=y +CONFIG_HID_GOOGLE_HAMMER=m +CONFIG_HID_VIVALDI=m CONFIG_HID_GT683R=m CONFIG_HID_KEYTOUCH=m CONFIG_HID_KYE=m CONFIG_HID_UCLOGIC=m CONFIG_HID_WALTOP=m +CONFIG_HID_VIEWSONIC=m CONFIG_HID_GYRATION=m CONFIG_HID_ICADE=m +CONFIG_HID_ITE=m +CONFIG_HID_JABRA=m CONFIG_HID_TWINHAN=m CONFIG_HID_KENSINGTON=m CONFIG_HID_LCPOWER=m +CONFIG_HID_LED=m CONFIG_HID_LENOVO=m CONFIG_HID_LOGITECH=m CONFIG_HID_LOGITECH_DJ=m @@ -5218,9 +7027,13 @@ CONFIG_LOGIRUMBLEPAD2_FF=y CONFIG_LOGIG940_FF=y CONFIG_LOGIWHEELS_FF=y CONFIG_HID_MAGICMOUSE=m +CONFIG_HID_MALTRON=m +CONFIG_HID_MAYFLASH=m +CONFIG_HID_REDRAGON=m CONFIG_HID_MICROSOFT=m CONFIG_HID_MONTEREY=m CONFIG_HID_MULTITOUCH=m +CONFIG_HID_NTI=m CONFIG_HID_NTRIG=m CONFIG_HID_ORTEK=m CONFIG_HID_PANTHERLORD=m @@ -5234,13 +7047,18 @@ CONFIG_HID_PICOLCD_LCD=y CONFIG_HID_PICOLCD_LEDS=y CONFIG_HID_PICOLCD_CIR=y CONFIG_HID_PLANTRONICS=m +CONFIG_HID_PLAYSTATION=m +CONFIG_PLAYSTATION_FF=y CONFIG_HID_PRIMAX=m +CONFIG_HID_RETRODE=m CONFIG_HID_ROCCAT=m CONFIG_HID_SAITEK=m CONFIG_HID_SAMSUNG=m +CONFIG_HID_SEMITEK=m CONFIG_HID_SONY=m CONFIG_SONY_FF=y CONFIG_HID_SPEEDLINK=m +CONFIG_HID_STEAM=m CONFIG_HID_STEELSERIES=m CONFIG_HID_SUNPLUS=m CONFIG_HID_RMI=m @@ -5254,6 +7072,8 @@ CONFIG_HID_TOPSEED=m CONFIG_HID_THINGM=m CONFIG_HID_THRUSTMASTER=m CONFIG_THRUSTMASTER_FF=y +CONFIG_HID_UDRAW_PS3=m +CONFIG_HID_U2FZERO=m CONFIG_HID_WACOM=m CONFIG_HID_WIIMOTE=m CONFIG_HID_XINMO=m @@ -5262,6 +7082,9 @@ CONFIG_ZEROPLUS_FF=y CONFIG_HID_ZYDACRON=m CONFIG_HID_SENSOR_HUB=m CONFIG_HID_SENSOR_CUSTOM_SENSOR=m +CONFIG_HID_ALPS=m +CONFIG_HID_MCP2221=m +# end of Special HID drivers # # USB HID support @@ -5275,49 +7098,84 @@ CONFIG_USB_HIDDEV=y # # CONFIG_USB_KBD is not set # CONFIG_USB_MOUSE is not set +# end of USB HID Boot Protocol drivers +# end of USB HID support # # I2C HID support # -CONFIG_I2C_HID=m +CONFIG_I2C_HID_ACPI=m +# end of I2C HID support + +CONFIG_I2C_HID_CORE=m + +# +# Intel ISH HID support +# +CONFIG_INTEL_ISH_HID=m +CONFIG_INTEL_ISH_FIRMWARE_DOWNLOADER=m +# end of Intel ISH HID support + +# +# AMD SFH HID Support +# +CONFIG_AMD_SFH_HID=m +# end of AMD SFH HID Support + +# +# Surface System Aggregator Module HID support +# +CONFIG_SURFACE_HID=m +CONFIG_SURFACE_KBD=m +# end of Surface System Aggregator Module HID support + +CONFIG_SURFACE_HID_CORE=m +# end of HID support + CONFIG_USB_OHCI_LITTLE_ENDIAN=y CONFIG_USB_SUPPORT=y CONFIG_USB_COMMON=y +CONFIG_USB_LED_TRIG=y +CONFIG_USB_ULPI_BUS=m +# CONFIG_USB_CONN_GPIO is not set CONFIG_USB_ARCH_HAS_HCD=y CONFIG_USB=y +CONFIG_USB_PCI=y CONFIG_USB_ANNOUNCE_NEW_DEVICES=y # # Miscellaneous USB options # CONFIG_USB_DEFAULT_PERSIST=y +# CONFIG_USB_FEW_INIT_RETRIES is not set # CONFIG_USB_DYNAMIC_MINORS is not set CONFIG_USB_OTG=y -# CONFIG_USB_OTG_WHITELIST is not set -# CONFIG_USB_OTG_BLACKLIST_HUB is not set +# CONFIG_USB_OTG_PRODUCTLIST is not set +# CONFIG_USB_OTG_DISABLE_EXTERNAL_HUB is not set # CONFIG_USB_OTG_FSM is not set -CONFIG_USB_ULPI_BUS=m +CONFIG_USB_LEDS_TRIGGER_USBPORT=m +CONFIG_USB_AUTOSUSPEND_DELAY=2 CONFIG_USB_MON=y -CONFIG_USB_WUSB=m -CONFIG_USB_WUSB_CBAF=m -# CONFIG_USB_WUSB_CBAF_DEBUG is not set # # USB Host Controller Drivers # CONFIG_USB_C67X00_HCD=m CONFIG_USB_XHCI_HCD=m +CONFIG_USB_XHCI_DBGCAP=y CONFIG_USB_XHCI_PCI=m +CONFIG_USB_XHCI_PCI_RENESAS=m CONFIG_USB_XHCI_PLATFORM=m CONFIG_USB_EHCI_HCD=m CONFIG_USB_EHCI_ROOT_HUB_TT=y CONFIG_USB_EHCI_TT_NEWSCHED=y CONFIG_USB_EHCI_PCI=m +# CONFIG_USB_EHCI_FSL is not set CONFIG_USB_EHCI_HCD_PLATFORM=m CONFIG_USB_OXU210HP_HCD=m CONFIG_USB_ISP116X_HCD=m -CONFIG_USB_ISP1362_HCD=m CONFIG_USB_FOTG210_HCD=m +# CONFIG_USB_MAX3421_HCD is not set CONFIG_USB_OHCI_HCD=m CONFIG_USB_OHCI_HCD_PCI=m CONFIG_USB_OHCI_HCD_SSB=y @@ -5328,8 +7186,6 @@ CONFIG_USB_SL811_HCD=m # CONFIG_USB_SL811_HCD_ISO is not set CONFIG_USB_SL811_CS=m CONFIG_USB_R8A66597_HCD=m -CONFIG_USB_WHCI_HCD=m -CONFIG_USB_HWA_HCD=m # CONFIG_USB_HCD_BCMA is not set CONFIG_USB_HCD_SSB=m # CONFIG_USB_HCD_TEST_MODE is not set @@ -5374,8 +7230,14 @@ CONFIG_USB_MDC800=m CONFIG_USB_MICROTEK=m CONFIG_USBIP_CORE=m CONFIG_USBIP_VHCI_HCD=m +CONFIG_USBIP_VHCI_HC_PORTS=8 +CONFIG_USBIP_VHCI_NR_HCS=1 CONFIG_USBIP_HOST=m # CONFIG_USBIP_DEBUG is not set +CONFIG_USB_CDNS_SUPPORT=m +# CONFIG_USB_CDNS3 is not set +CONFIG_USB_CDNSP_PCI=m +# CONFIG_USB_CDNSP_HOST is not set CONFIG_USB_MUSB_HDRC=m CONFIG_USB_MUSB_HOST=y @@ -5395,10 +7257,12 @@ CONFIG_USB_DWC3_HOST=y # Platform Glue Driver Support # CONFIG_USB_DWC3_PCI=m +# CONFIG_USB_DWC3_HAPS is not set # CONFIG_USB_DWC2 is not set CONFIG_USB_CHIPIDEA=m # CONFIG_USB_CHIPIDEA_HOST is not set -# CONFIG_USB_CHIPIDEA_DEBUG is not set +CONFIG_USB_CHIPIDEA_MSM=m +CONFIG_USB_CHIPIDEA_GENERIC=m CONFIG_USB_ISP1760=m CONFIG_USB_ISP1760_HCD=y CONFIG_USB_ISP1760_HOST_ROLE=y @@ -5426,6 +7290,7 @@ CONFIG_USB_SERIAL_IR=m CONFIG_USB_SERIAL_EDGEPORT=m CONFIG_USB_SERIAL_EDGEPORT_TI=m CONFIG_USB_SERIAL_F81232=m +CONFIG_USB_SERIAL_F8153X=m CONFIG_USB_SERIAL_GARMIN=m CONFIG_USB_SERIAL_IPW=m CONFIG_USB_SERIAL_IUU=m @@ -5451,7 +7316,6 @@ CONFIG_USB_SERIAL_SIERRAWIRELESS=m CONFIG_USB_SERIAL_SYMBOL=m CONFIG_USB_SERIAL_TI=m CONFIG_USB_SERIAL_CYBERJACK=m -CONFIG_USB_SERIAL_XIRCOM=m CONFIG_USB_SERIAL_WWAN=m CONFIG_USB_SERIAL_OPTION=m CONFIG_USB_SERIAL_OMNINET=m @@ -5460,6 +7324,8 @@ CONFIG_USB_SERIAL_XSENS_MT=m CONFIG_USB_SERIAL_WISHBONE=m CONFIG_USB_SERIAL_SSU100=m CONFIG_USB_SERIAL_QT2=m +CONFIG_USB_SERIAL_UPD78F0730=m +CONFIG_USB_SERIAL_XR=m CONFIG_USB_SERIAL_DEBUG=m # @@ -5471,14 +7337,13 @@ CONFIG_USB_ADUTUX=m CONFIG_USB_SEVSEG=m CONFIG_USB_LEGOTOWER=m CONFIG_USB_LCD=m -CONFIG_USB_LED=m CONFIG_USB_CYPRESS_CY7C63=m CONFIG_USB_CYTHERM=m CONFIG_USB_IDMOUSE=m CONFIG_USB_FTDI_ELAN=m CONFIG_USB_APPLEDISPLAY=m +CONFIG_APPLE_MFI_FASTCHARGE=m CONFIG_USB_SISUSBVGA=m -CONFIG_USB_SISUSBVGA_CON=y CONFIG_USB_LD=m CONFIG_USB_TRANCEVIBRATOR=m CONFIG_USB_IOWARRIOR=m @@ -5487,7 +7352,9 @@ CONFIG_USB_TEST=m CONFIG_USB_ISIGHTFW=m CONFIG_USB_YUREX=m CONFIG_USB_EZUSB_FX2=m +CONFIG_USB_HUB_USB251XB=m CONFIG_USB_HSIC_USB3503=m +CONFIG_USB_HSIC_USB4604=m CONFIG_USB_LINK_LAYER_TEST=m CONFIG_USB_CHAOSKEY=m CONFIG_USB_ATM=m @@ -5499,39 +7366,65 @@ CONFIG_USB_XUSBATM=m # # USB Physical Layer drivers # -# CONFIG_USB_PHY is not set +CONFIG_USB_PHY=y # CONFIG_NOP_USB_XCEIV is not set # CONFIG_USB_GPIO_VBUS is not set # CONFIG_TAHVO_USB is not set # CONFIG_USB_ISP1301 is not set +# end of USB Physical Layer drivers + # CONFIG_USB_GADGET is not set -CONFIG_USB_LED_TRIG=y -CONFIG_UWB=m -CONFIG_UWB_HWA=m -CONFIG_UWB_WHCI=m -CONFIG_UWB_I1480U=m -CONFIG_MMC=m -# CONFIG_MMC_DEBUG is not set +CONFIG_TYPEC=m +CONFIG_TYPEC_TCPM=m +CONFIG_TYPEC_TCPCI=m +CONFIG_TYPEC_RT1711H=m +CONFIG_TYPEC_TCPCI_MAXIM=m +CONFIG_TYPEC_FUSB302=m +CONFIG_TYPEC_UCSI=m +CONFIG_UCSI_CCG=m +CONFIG_UCSI_ACPI=m +CONFIG_TYPEC_TPS6598X=m +CONFIG_TYPEC_HD3SS3220=m +CONFIG_TYPEC_STUSB160X=m # -# MMC/SD/SDIO Card Drivers +# USB Type-C Multiplexer/DeMultiplexer Switch support # +CONFIG_TYPEC_MUX_PI3USB30532=m +CONFIG_TYPEC_MUX_INTEL_PMC=m +# end of USB Type-C Multiplexer/DeMultiplexer Switch support + +# +# USB Type-C Alternate Mode drivers +# +CONFIG_TYPEC_DP_ALTMODE=m +CONFIG_TYPEC_NVIDIA_ALTMODE=m +# end of USB Type-C Alternate Mode drivers + +CONFIG_USB_ROLE_SWITCH=m +CONFIG_USB_ROLES_INTEL_XHCI=m +CONFIG_MMC=m CONFIG_MMC_BLOCK=m CONFIG_MMC_BLOCK_MINORS=8 -CONFIG_MMC_BLOCK_BOUNCE=y CONFIG_SDIO_UART=m # CONFIG_MMC_TEST is not set +CONFIG_MMC_CRYPTO=y # # MMC/SD/SDIO Host Controller Drivers # +# CONFIG_MMC_DEBUG is not set CONFIG_MMC_SDHCI=m +CONFIG_MMC_SDHCI_IO_ACCESSORS=y CONFIG_MMC_SDHCI_PCI=m CONFIG_MMC_RICOH_MMC=y CONFIG_MMC_SDHCI_ACPI=m CONFIG_MMC_SDHCI_PLTFM=m +# CONFIG_MMC_SDHCI_F_SDH30 is not set CONFIG_MMC_WBSD=m +CONFIG_MMC_ALCOR=m CONFIG_MMC_TIFM_SD=m +# CONFIG_MMC_SPI is not set CONFIG_MMC_SDRICOH_CS=m CONFIG_MMC_CB710=m CONFIG_MMC_VIA_SDMMC=m @@ -5540,8 +7433,11 @@ CONFIG_MMC_USHC=m CONFIG_MMC_USDHI6ROL0=m CONFIG_MMC_REALTEK_PCI=m CONFIG_MMC_REALTEK_USB=m +CONFIG_MMC_CQHCI=m +CONFIG_MMC_HSQ=m CONFIG_MMC_TOSHIBA_PCI=m CONFIG_MMC_MTK=m +CONFIG_MMC_SDHCI_XENON=m CONFIG_MEMSTICK=m # CONFIG_MEMSTICK_DEBUG is not set @@ -5563,31 +7459,34 @@ CONFIG_MEMSTICK_REALTEK_USB=m CONFIG_NEW_LEDS=y CONFIG_LEDS_CLASS=y CONFIG_LEDS_CLASS_FLASH=m +CONFIG_LEDS_CLASS_MULTICOLOR=m +CONFIG_LEDS_BRIGHTNESS_HW_CHANGED=y # # LED drivers # +CONFIG_LEDS_APU=m +CONFIG_LEDS_AS3645A=m CONFIG_LEDS_LM3530=m +CONFIG_LEDS_LM3532=m CONFIG_LEDS_LM3533=m CONFIG_LEDS_LM3642=m +CONFIG_LEDS_LM3601X=m +CONFIG_LEDS_MT6323=m CONFIG_LEDS_PCA9532=m # CONFIG_LEDS_PCA9532_GPIO is not set CONFIG_LEDS_GPIO=m CONFIG_LEDS_LP3944=m -CONFIG_LEDS_LP55XX_COMMON=m -CONFIG_LEDS_LP5521=m -CONFIG_LEDS_LP5523=m -CONFIG_LEDS_LP5562=m -CONFIG_LEDS_LP8501=m -CONFIG_LEDS_LP8860=m +CONFIG_LEDS_LP3952=m +CONFIG_LEDS_LP50XX=m CONFIG_LEDS_CLEVO_MAIL=m CONFIG_LEDS_PCA955X=m +# CONFIG_LEDS_PCA955X_GPIO is not set CONFIG_LEDS_PCA963X=m +# CONFIG_LEDS_DAC124S085 is not set CONFIG_LEDS_REGULATOR=m CONFIG_LEDS_BD2802=m CONFIG_LEDS_INTEL_SS4200=m -CONFIG_LEDS_LT3593=m -CONFIG_LEDS_DELL_NETBOOKS=m CONFIG_LEDS_MC13783=m CONFIG_LEDS_TCA6507=m CONFIG_LEDS_TLC591XX=m @@ -5598,6 +7497,19 @@ CONFIG_LEDS_MENF21BMC=m # LED driver for blink(1) USB RGB LED is under Special HID drivers (HID_THINGM) # CONFIG_LEDS_BLINKM=m +CONFIG_LEDS_MLXCPLD=m +CONFIG_LEDS_MLXREG=m +CONFIG_LEDS_USER=m +CONFIG_LEDS_NIC78BX=m +CONFIG_LEDS_TI_LMU_COMMON=m +CONFIG_LEDS_LM36274=m +CONFIG_LEDS_TPS6105X=m +CONFIG_LEDS_SGM3140=m + +# +# Flash and Torch LED drivers +# +# CONFIG_LEDS_RT8515 is not set # # LED Triggers @@ -5605,9 +7517,12 @@ CONFIG_LEDS_BLINKM=m CONFIG_LEDS_TRIGGERS=y CONFIG_LEDS_TRIGGER_TIMER=m CONFIG_LEDS_TRIGGER_ONESHOT=m +CONFIG_LEDS_TRIGGER_DISK=y +CONFIG_LEDS_TRIGGER_MTD=y CONFIG_LEDS_TRIGGER_HEARTBEAT=m CONFIG_LEDS_TRIGGER_BACKLIGHT=m # CONFIG_LEDS_TRIGGER_CPU is not set +CONFIG_LEDS_TRIGGER_ACTIVITY=m CONFIG_LEDS_TRIGGER_GPIO=m CONFIG_LEDS_TRIGGER_DEFAULT_ON=m @@ -5616,46 +7531,101 @@ CONFIG_LEDS_TRIGGER_DEFAULT_ON=m # CONFIG_LEDS_TRIGGER_TRANSIENT=m CONFIG_LEDS_TRIGGER_CAMERA=m +CONFIG_LEDS_TRIGGER_PANIC=y +CONFIG_LEDS_TRIGGER_NETDEV=m +CONFIG_LEDS_TRIGGER_PATTERN=m +CONFIG_LEDS_TRIGGER_AUDIO=m +CONFIG_LEDS_TRIGGER_TTY=m CONFIG_ACCESSIBILITY=y CONFIG_A11Y_BRAILLE_CONSOLE=y + +# +# Speakup console speech +# +CONFIG_SPEAKUP=m +CONFIG_SPEAKUP_SYNTH_ACNTSA=m +CONFIG_SPEAKUP_SYNTH_APOLLO=m +CONFIG_SPEAKUP_SYNTH_AUDPTR=m +CONFIG_SPEAKUP_SYNTH_BNS=m +CONFIG_SPEAKUP_SYNTH_DECTLK=m +CONFIG_SPEAKUP_SYNTH_DECEXT=m +CONFIG_SPEAKUP_SYNTH_LTLK=m +CONFIG_SPEAKUP_SYNTH_SOFT=m +CONFIG_SPEAKUP_SYNTH_SPKOUT=m +CONFIG_SPEAKUP_SYNTH_TXPRT=m +CONFIG_SPEAKUP_SYNTH_DUMMY=m +# end of Speakup console speech + CONFIG_INFINIBAND=m CONFIG_INFINIBAND_USER_MAD=m CONFIG_INFINIBAND_USER_ACCESS=m CONFIG_INFINIBAND_USER_MEM=y CONFIG_INFINIBAND_ON_DEMAND_PAGING=y CONFIG_INFINIBAND_ADDR_TRANS=y +CONFIG_INFINIBAND_ADDR_TRANS_CONFIGFS=y +CONFIG_INFINIBAND_VIRT_DMA=y CONFIG_INFINIBAND_MTHCA=m CONFIG_INFINIBAND_MTHCA_DEBUG=y CONFIG_INFINIBAND_QIB=m CONFIG_INFINIBAND_QIB_DCA=y -# CONFIG_INFINIBAND_CXGB3 is not set CONFIG_INFINIBAND_CXGB4=m +CONFIG_INFINIBAND_EFA=m +CONFIG_INFINIBAND_I40IW=m CONFIG_MLX4_INFINIBAND=m CONFIG_MLX5_INFINIBAND=m -CONFIG_INFINIBAND_NES=m -# CONFIG_INFINIBAND_NES_DEBUG is not set CONFIG_INFINIBAND_OCRDMA=m +CONFIG_INFINIBAND_VMWARE_PVRDMA=m CONFIG_INFINIBAND_USNIC=m +CONFIG_INFINIBAND_HFI1=m +# CONFIG_HFI1_DEBUG_SDMA_ORDER is not set +# CONFIG_SDMA_VERBOSITY is not set +CONFIG_INFINIBAND_QEDR=m +CONFIG_INFINIBAND_RDMAVT=m +CONFIG_RDMA_RXE=m +CONFIG_RDMA_SIW=m CONFIG_INFINIBAND_IPOIB=m -# CONFIG_INFINIBAND_IPOIB_CM is not set +CONFIG_INFINIBAND_IPOIB_CM=y CONFIG_INFINIBAND_IPOIB_DEBUG=y -# CONFIG_INFINIBAND_IPOIB_DEBUG_DATA is not set +CONFIG_INFINIBAND_IPOIB_DEBUG_DATA=y CONFIG_INFINIBAND_SRP=m CONFIG_INFINIBAND_SRPT=m CONFIG_INFINIBAND_ISER=m CONFIG_INFINIBAND_ISERT=m +CONFIG_INFINIBAND_RTRS=m +CONFIG_INFINIBAND_RTRS_CLIENT=m +CONFIG_INFINIBAND_RTRS_SERVER=m +CONFIG_INFINIBAND_OPA_VNIC=m CONFIG_EDAC_ATOMIC_SCRUB=y CONFIG_EDAC_SUPPORT=y CONFIG_EDAC=y CONFIG_EDAC_LEGACY_SYSFS=y # CONFIG_EDAC_DEBUG is not set -CONFIG_EDAC_DECODE_MCE=y -# CONFIG_EDAC_MM_EDAC is not set +CONFIG_EDAC_DECODE_MCE=m +CONFIG_EDAC_GHES=y +CONFIG_EDAC_AMD64=m +CONFIG_EDAC_E752X=m +CONFIG_EDAC_I82975X=m +CONFIG_EDAC_I3000=m +CONFIG_EDAC_I3200=m +CONFIG_EDAC_IE31200=m +CONFIG_EDAC_X38=m +CONFIG_EDAC_I5400=m +CONFIG_EDAC_I7CORE=m +CONFIG_EDAC_I5000=m +CONFIG_EDAC_I5100=m +CONFIG_EDAC_I7300=m +CONFIG_EDAC_SBRIDGE=m +CONFIG_EDAC_SKX=m +CONFIG_EDAC_I10NM=m +CONFIG_EDAC_PND2=m +CONFIG_EDAC_IGEN6=m CONFIG_RTC_LIB=y +CONFIG_RTC_MC146818_LIB=y CONFIG_RTC_CLASS=y # CONFIG_RTC_HCTOSYS is not set # CONFIG_RTC_SYSTOHC is not set # CONFIG_RTC_DEBUG is not set +CONFIG_RTC_NVMEM=y # # RTC interfaces @@ -5670,37 +7640,65 @@ CONFIG_RTC_DRV_TEST=m # I2C RTC drivers # CONFIG_RTC_DRV_ABB5ZES3=m +CONFIG_RTC_DRV_ABEOZ9=m CONFIG_RTC_DRV_ABX80X=m CONFIG_RTC_DRV_DS1307=m +# CONFIG_RTC_DRV_DS1307_CENTURY is not set CONFIG_RTC_DRV_DS1374=m CONFIG_RTC_DRV_DS1374_WDT=y CONFIG_RTC_DRV_DS1672=m -CONFIG_RTC_DRV_DS3232=m CONFIG_RTC_DRV_MAX6900=m CONFIG_RTC_DRV_RS5C372=m CONFIG_RTC_DRV_ISL1208=m CONFIG_RTC_DRV_ISL12022=m -CONFIG_RTC_DRV_ISL12057=m CONFIG_RTC_DRV_X1205=m -CONFIG_RTC_DRV_PCF2127=m CONFIG_RTC_DRV_PCF8523=m -CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_PCF85063=m +CONFIG_RTC_DRV_PCF85363=m +CONFIG_RTC_DRV_PCF8563=m CONFIG_RTC_DRV_PCF8583=m CONFIG_RTC_DRV_M41T80=m CONFIG_RTC_DRV_M41T80_WDT=y CONFIG_RTC_DRV_BQ32K=m CONFIG_RTC_DRV_S35390A=m CONFIG_RTC_DRV_FM3130=m +CONFIG_RTC_DRV_RX8010=m CONFIG_RTC_DRV_RX8581=m CONFIG_RTC_DRV_RX8025=m CONFIG_RTC_DRV_EM3027=m -CONFIG_RTC_DRV_RV3029C2=m +CONFIG_RTC_DRV_RV3028=m +CONFIG_RTC_DRV_RV3032=m CONFIG_RTC_DRV_RV8803=m +CONFIG_RTC_DRV_SD3078=m # # SPI RTC drivers # +# CONFIG_RTC_DRV_M41T93 is not set +# CONFIG_RTC_DRV_M41T94 is not set +# CONFIG_RTC_DRV_DS1302 is not set +# CONFIG_RTC_DRV_DS1305 is not set +# CONFIG_RTC_DRV_DS1343 is not set +# CONFIG_RTC_DRV_DS1347 is not set +# CONFIG_RTC_DRV_DS1390 is not set +# CONFIG_RTC_DRV_MAX6916 is not set +# CONFIG_RTC_DRV_R9701 is not set +# CONFIG_RTC_DRV_RX4581 is not set +# CONFIG_RTC_DRV_RS5C348 is not set +# CONFIG_RTC_DRV_MAX6902 is not set +# CONFIG_RTC_DRV_PCF2123 is not set +# CONFIG_RTC_DRV_MCP795 is not set +CONFIG_RTC_I2C_AND_SPI=m + +# +# SPI and I2C RTC drivers +# +CONFIG_RTC_DRV_DS3232=m +CONFIG_RTC_DRV_DS3232_HWMON=y +CONFIG_RTC_DRV_PCF2127=m +CONFIG_RTC_DRV_RV3029C2=m +CONFIG_RTC_DRV_RV3029_HWMON=y +# CONFIG_RTC_DRV_RX6110 is not set # # Platform RTC drivers @@ -5715,8 +7713,6 @@ CONFIG_RTC_DRV_DS1685=y # CONFIG_RTC_DRV_DS17285 is not set # CONFIG_RTC_DRV_DS17485 is not set # CONFIG_RTC_DRV_DS17885 is not set -# CONFIG_RTC_DS1685_PROC_REGS is not set -# CONFIG_RTC_DS1685_SYSFS_REGS is not set CONFIG_RTC_DRV_DS1742=m CONFIG_RTC_DRV_DS2404=m CONFIG_RTC_DRV_STK17TA8=m @@ -5728,10 +7724,12 @@ CONFIG_RTC_DRV_BQ4802=m CONFIG_RTC_DRV_RP5C01=m CONFIG_RTC_DRV_V3020=m CONFIG_RTC_DRV_PCF50633=m +CONFIG_RTC_DRV_CROS_EC=m # # on-CPU RTC drivers # +# CONFIG_RTC_DRV_FTRTC010 is not set CONFIG_RTC_DRV_MC13XXX=m CONFIG_RTC_DRV_MT6397=m @@ -5739,6 +7737,8 @@ CONFIG_RTC_DRV_MT6397=m # HID Sensor RTC drivers # CONFIG_RTC_DRV_HID_SENSOR_TIME=m +# CONFIG_RTC_DRV_GOLDFISH is not set +CONFIG_RTC_DRV_WILCO_EC=m CONFIG_DMADEVICES=y # CONFIG_DMADEVICES_DEBUG is not set @@ -5746,15 +7746,23 @@ CONFIG_DMADEVICES=y # DMA Devices # CONFIG_DMA_ENGINE=y -CONFIG_DMA_VIRTUAL_CHANNELS=m +CONFIG_DMA_VIRTUAL_CHANNELS=y CONFIG_DMA_ACPI=y +CONFIG_ALTERA_MSGDMA=m CONFIG_INTEL_IDMA64=m +# CONFIG_INTEL_IDXD is not set CONFIG_INTEL_IOATDMA=m -CONFIG_INTEL_MIC_X100_DMA=m +CONFIG_PLX_DMA=m +# CONFIG_QCOM_HIDMA_MGMT is not set +# CONFIG_QCOM_HIDMA is not set CONFIG_DW_DMAC_CORE=m CONFIG_DW_DMAC=m CONFIG_DW_DMAC_PCI=m +CONFIG_DW_EDMA=m +CONFIG_DW_EDMA_PCIE=m CONFIG_HSU_DMA=m +# CONFIG_SF_PDMA is not set +CONFIG_INTEL_LDMA=y # # DMA Clients @@ -5762,9 +7770,35 @@ CONFIG_HSU_DMA=m # CONFIG_ASYNC_TX_DMA is not set CONFIG_DMATEST=m CONFIG_DMA_ENGINE_RAID=y + +# +# DMABUF options +# +CONFIG_SYNC_FILE=y +# CONFIG_SW_SYNC is not set +CONFIG_UDMABUF=y +# CONFIG_DMABUF_MOVE_NOTIFY is not set +# CONFIG_DMABUF_DEBUG is not set +# CONFIG_DMABUF_SELFTESTS is not set +CONFIG_DMABUF_HEAPS=y +CONFIG_DMABUF_HEAPS_SYSTEM=y +CONFIG_DMABUF_HEAPS_CMA=y +# end of DMABUF options + CONFIG_DCA=m CONFIG_AUXDISPLAY=y +CONFIG_CHARLCD=m +CONFIG_HD44780_COMMON=m +CONFIG_HD44780=m # CONFIG_KS0108 is not set +# CONFIG_IMG_ASCII_LCD is not set +# CONFIG_LCD2S is not set +# CONFIG_PARPORT_PANEL is not set +# CONFIG_PANEL_CHANGE_MESSAGE is not set +# CONFIG_CHARLCD_BL_OFF is not set +# CONFIG_CHARLCD_BL_ON is not set +CONFIG_CHARLCD_BL_FLASH=y +# CONFIG_PANEL is not set CONFIG_UIO=m CONFIG_UIO_CIF=m CONFIG_UIO_PDRV_GENIRQ=m @@ -5775,40 +7809,71 @@ CONFIG_UIO_PCI_GENERIC=m CONFIG_UIO_NETX=m CONFIG_UIO_PRUSS=m CONFIG_UIO_MF624=m +CONFIG_UIO_HV_GENERIC=m CONFIG_VFIO_IOMMU_TYPE1=m CONFIG_VFIO_VIRQFD=m CONFIG_VFIO=m +# CONFIG_VFIO_NOIOMMU is not set CONFIG_VFIO_PCI=m -# CONFIG_VFIO_PCI_VGA is not set +CONFIG_VFIO_PCI_VGA=y CONFIG_VFIO_PCI_MMAP=y CONFIG_VFIO_PCI_INTX=y +CONFIG_VFIO_PCI_IGD=y +CONFIG_VFIO_MDEV=m +CONFIG_VFIO_MDEV_DEVICE=m CONFIG_IRQ_BYPASS_MANAGER=m CONFIG_VIRT_DRIVERS=y -CONFIG_VIRTIO=m - -# -# Virtio drivers -# +CONFIG_VBOXGUEST=m +CONFIG_NITRO_ENCLAVES=m +CONFIG_ACRN_HSM=m +CONFIG_VIRTIO=y +CONFIG_ARCH_HAS_RESTRICTED_VIRTIO_MEMORY_ACCESS=y +CONFIG_VIRTIO_PCI_LIB=m +CONFIG_VIRTIO_MENU=y CONFIG_VIRTIO_PCI=m CONFIG_VIRTIO_PCI_LEGACY=y +CONFIG_VIRTIO_VDPA=m +CONFIG_VIRTIO_PMEM=m CONFIG_VIRTIO_BALLOON=m +CONFIG_VIRTIO_MEM=m CONFIG_VIRTIO_INPUT=m CONFIG_VIRTIO_MMIO=m # CONFIG_VIRTIO_MMIO_CMDLINE_DEVICES is not set +CONFIG_VIRTIO_DMA_SHARED_BUFFER=m +CONFIG_VDPA=m +CONFIG_VDPA_SIM=m +# CONFIG_VDPA_SIM_NET is not set +# CONFIG_VDPA_SIM_BLOCK is not set +CONFIG_IFCVF=m +CONFIG_MLX5_VDPA=y +CONFIG_MLX5_VDPA_NET=m +CONFIG_VP_VDPA=m +CONFIG_VHOST_IOTLB=m +CONFIG_VHOST_RING=m +CONFIG_VHOST=m +CONFIG_VHOST_MENU=y +CONFIG_VHOST_NET=m +CONFIG_VHOST_SCSI=m +CONFIG_VHOST_VSOCK=m +CONFIG_VHOST_VDPA=m +# CONFIG_VHOST_CROSS_ENDIAN_LEGACY is not set # # Microsoft Hyper-V guest support # CONFIG_HYPERV=m +CONFIG_HYPERV_TIMER=y CONFIG_HYPERV_UTILS=m CONFIG_HYPERV_BALLOON=m +# end of Microsoft Hyper-V guest support # # Xen driver support # CONFIG_XEN_BALLOON=y -# CONFIG_XEN_BALLOON_MEMORY_HOTPLUG is not set -CONFIG_XEN_SCRUB_PAGES=y +CONFIG_XEN_BALLOON_MEMORY_HOTPLUG=y +CONFIG_XEN_MEMORY_HOTPLUG_LIMIT=512 +CONFIG_XEN_SCRUB_PAGES_DEFAULT=y CONFIG_XEN_DEV_EVTCHN=y CONFIG_XEN_BACKEND=y CONFIG_XENFS=y @@ -5817,35 +7882,38 @@ CONFIG_XEN_SYS_HYPERVISOR=y CONFIG_XEN_XENBUS_FRONTEND=y CONFIG_XEN_GNTDEV=m CONFIG_XEN_GRANT_DEV_ALLOC=m +# CONFIG_XEN_GRANT_DMA_ALLOC is not set CONFIG_SWIOTLB_XEN=y CONFIG_XEN_PCIDEV_BACKEND=m -# CONFIG_XEN_SCSI_BACKEND is not set +CONFIG_XEN_PVCALLS_FRONTEND=m +CONFIG_XEN_PVCALLS_BACKEND=y +CONFIG_XEN_SCSI_BACKEND=m CONFIG_XEN_PRIVCMD=y CONFIG_XEN_ACPI_PROCESSOR=m -# CONFIG_XEN_MCE_LOG is not set +CONFIG_XEN_MCE_LOG=y CONFIG_XEN_HAVE_PVMMU=y CONFIG_XEN_EFI=y CONFIG_XEN_AUTO_XLATE=y CONFIG_XEN_ACPI=y CONFIG_XEN_SYMS=y CONFIG_XEN_HAVE_VPMU=y -CONFIG_STAGING=y -# CONFIG_SLICOSS is not set -# CONFIG_PRISM2_USB is not set +CONFIG_XEN_UNPOPULATED_ALLOC=y +# end of Xen driver support + +# CONFIG_GREYBUS is not set # CONFIG_COMEDI is not set -# CONFIG_PANEL is not set +CONFIG_STAGING=y +CONFIG_PRISM2_USB=m CONFIG_RTL8192U=m CONFIG_RTLLIB=m CONFIG_RTLLIB_CRYPTO_CCMP=m CONFIG_RTLLIB_CRYPTO_TKIP=m CONFIG_RTLLIB_CRYPTO_WEP=m CONFIG_RTL8192E=m +CONFIG_RTL8723BS=m CONFIG_R8712U=m CONFIG_R8188EU=m CONFIG_88EU_AP_MODE=y -CONFIG_R8723AU=m -CONFIG_8723AU_AP_MODE=y -CONFIG_8723AU_BT_COEXIST=y CONFIG_RTS5208=m CONFIG_VT6655=m CONFIG_VT6656=m @@ -5857,148 +7925,147 @@ CONFIG_VT6656=m # # Accelerometers # +# CONFIG_ADIS16203 is not set +# CONFIG_ADIS16240 is not set +# end of Accelerometers # # Analog to digital converters # -CONFIG_AD7606=m -CONFIG_AD7606_IFACE_PARALLEL=m +# CONFIG_AD7816 is not set +# CONFIG_AD7280 is not set +# end of Analog to digital converters # # Analog digital bi-direction converters # CONFIG_ADT7316=m +CONFIG_ADT7316_SPI=m CONFIG_ADT7316_I2C=m +# end of Analog digital bi-direction converters # # Capacitance to digital converters # -CONFIG_AD7150=m -CONFIG_AD7152=m CONFIG_AD7746=m +# end of Capacitance to digital converters # # Direct Digital Synthesis # - -# -# Digital gyroscope sensors -# +# CONFIG_AD9832 is not set +# CONFIG_AD9834 is not set +# end of Direct Digital Synthesis # # Network Analyzer, Impedance Converters # CONFIG_AD5933=m - -# -# Light sensors -# -CONFIG_SENSORS_ISL29018=m -CONFIG_SENSORS_ISL29028=m -CONFIG_TSL2583=m -CONFIG_TSL2x7x=m - -# -# Magnetometer sensors -# -CONFIG_SENSORS_HMC5843=m -CONFIG_SENSORS_HMC5843_I2C=m +# end of Network Analyzer, Impedance Converters # # Active energy metering IC # CONFIG_ADE7854=m CONFIG_ADE7854_I2C=m +CONFIG_ADE7854_SPI=m +# end of Active energy metering IC # # Resolver to digital converters # +# CONFIG_AD2S1210 is not set +# end of Resolver to digital converters +# end of IIO staging drivers -# -# Triggers - standalone -# -CONFIG_IIO_PERIODIC_RTC_TRIGGER=m -# CONFIG_IIO_SIMPLE_DUMMY is not set CONFIG_FB_SM750=m -CONFIG_FB_XGI=m - -# -# Speakup console speech -# -CONFIG_SPEAKUP=m -CONFIG_SPEAKUP_SYNTH_ACNTSA=m -CONFIG_SPEAKUP_SYNTH_APOLLO=m -CONFIG_SPEAKUP_SYNTH_AUDPTR=m -CONFIG_SPEAKUP_SYNTH_BNS=m -CONFIG_SPEAKUP_SYNTH_DECTLK=m -CONFIG_SPEAKUP_SYNTH_DECEXT=m -CONFIG_SPEAKUP_SYNTH_LTLK=m -CONFIG_SPEAKUP_SYNTH_SOFT=m -CONFIG_SPEAKUP_SYNTH_SPKOUT=m -CONFIG_SPEAKUP_SYNTH_TXPRT=m -CONFIG_SPEAKUP_SYNTH_DUMMY=m -CONFIG_TOUCHSCREEN_SYNAPTICS_I2C_RMI4=m CONFIG_STAGING_MEDIA=y -CONFIG_I2C_BCM2048=m -CONFIG_DVB_CXD2099=m -CONFIG_DVB_MN88472=m -CONFIG_DVB_MN88473=m -CONFIG_LIRC_STAGING=y -CONFIG_LIRC_BT829=m -CONFIG_LIRC_IMON=m -CONFIG_LIRC_PARALLEL=m -CONFIG_LIRC_SASEM=m -CONFIG_LIRC_SERIAL=m -CONFIG_LIRC_SERIAL_TRANSMITTER=y -CONFIG_LIRC_SIR=m -CONFIG_LIRC_ZILOG=m -# CONFIG_STAGING_RDMA is not set +CONFIG_INTEL_ATOMISP=y +CONFIG_VIDEO_ATOMISP=m +# CONFIG_VIDEO_ATOMISP_ISP2401 is not set +# CONFIG_VIDEO_ATOMISP_OV2722 is not set +# CONFIG_VIDEO_ATOMISP_GC2235 is not set +# CONFIG_VIDEO_ATOMISP_MSRLIST_HELPER is not set +# CONFIG_VIDEO_ATOMISP_MT9M114 is not set +# CONFIG_VIDEO_ATOMISP_GC0310 is not set +# CONFIG_VIDEO_ATOMISP_OV2680 is not set +# CONFIG_VIDEO_ATOMISP_OV5693 is not set +# CONFIG_VIDEO_ATOMISP_LM3554 is not set +CONFIG_VIDEO_ZORAN=m +CONFIG_VIDEO_ZORAN_DC30=m +CONFIG_VIDEO_ZORAN_ZR36060=m +CONFIG_VIDEO_ZORAN_BUZ=m +CONFIG_VIDEO_ZORAN_DC10=m +CONFIG_VIDEO_ZORAN_LML33=m +CONFIG_VIDEO_ZORAN_LML33R10=m +CONFIG_VIDEO_ZORAN_AVS6EYES=m +# CONFIG_VIDEO_IPU3_IMGU is not set # # Android # -CONFIG_WIMAX_GDM72XX=m -# CONFIG_WIMAX_GDM72XX_QOS is not set -# CONFIG_WIMAX_GDM72XX_K_MODE is not set -CONFIG_WIMAX_GDM72XX_WIMAX2=y -CONFIG_WIMAX_GDM72XX_USB=y -# CONFIG_WIMAX_GDM72XX_SDIO is not set -# CONFIG_WIMAX_GDM72XX_USB_PM is not set +# end of Android + CONFIG_LTE_GDM724X=m CONFIG_FIREWIRE_SERIAL=m CONFIG_FWTTY_MAX_TOTAL_PORTS=64 CONFIG_FWTTY_MAX_CARD_PORTS=32 -# CONFIG_LUSTRE_FS is not set -# CONFIG_DGNC is not set -# CONFIG_DGAP is not set # CONFIG_GS_FPGABOOT is not set -CONFIG_CRYPTO_SKEIN=y # CONFIG_UNISYSSPAR is not set -# CONFIG_WILC1000_DRIVER is not set -# CONFIG_MOST is not set +# CONFIG_FB_TFT is not set +# CONFIG_KS7010 is not set +# CONFIG_PI433 is not set +# CONFIG_FIELDBUS_DEV is not set +# CONFIG_KPC2000 is not set +CONFIG_QLGE=m +# CONFIG_WFX is not set CONFIG_X86_PLATFORM_DEVICES=y -CONFIG_ACER_WMI=m +CONFIG_ACPI_WMI=m +CONFIG_WMI_BMOF=m +CONFIG_HUAWEI_WMI=m +CONFIG_INTEL_WMI_SBL_FW_UPDATE=m +CONFIG_INTEL_WMI_THUNDERBOLT=m +CONFIG_MXM_WMI=m +CONFIG_PEAQ_WMI=m +CONFIG_XIAOMI_WMI=m +CONFIG_GIGABYTE_WMI=m CONFIG_ACERHDF=m -CONFIG_ALIENWARE_WMI=m +CONFIG_ACER_WIRELESS=m +CONFIG_ACER_WMI=m +CONFIG_AMD_PMC=m +CONFIG_ADV_SWBUTTON=m +CONFIG_APPLE_GMUX=m CONFIG_ASUS_LAPTOP=m +CONFIG_ASUS_WIRELESS=m +CONFIG_ASUS_WMI=m +CONFIG_ASUS_NB_WMI=m +CONFIG_EEEPC_LAPTOP=m +CONFIG_EEEPC_WMI=m +CONFIG_X86_PLATFORM_DRIVERS_DELL=y +CONFIG_ALIENWARE_WMI=m +CONFIG_DCDBAS=m CONFIG_DELL_LAPTOP=m +CONFIG_DELL_RBU=m +CONFIG_DELL_RBTN=m +CONFIG_DELL_SMBIOS=m +CONFIG_DELL_SMBIOS_WMI=y +CONFIG_DELL_SMBIOS_SMM=y +CONFIG_DELL_SMO8800=m CONFIG_DELL_WMI=m CONFIG_DELL_WMI_AIO=m -CONFIG_DELL_SMO8800=m -CONFIG_DELL_RBTN=m +CONFIG_DELL_WMI_DESCRIPTOR=m +CONFIG_DELL_WMI_LED=m +CONFIG_DELL_WMI_SYSMAN=m +CONFIG_AMILO_RFKILL=m CONFIG_FUJITSU_LAPTOP=m -# CONFIG_FUJITSU_LAPTOP_DEBUG is not set CONFIG_FUJITSU_TABLET=m -CONFIG_AMILO_RFKILL=m +CONFIG_GPD_POCKET_FAN=m CONFIG_HP_ACCEL=m CONFIG_HP_WIRELESS=m CONFIG_HP_WMI=m -CONFIG_MSI_LAPTOP=m -CONFIG_PANASONIC_LAPTOP=m -CONFIG_COMPAL_LAPTOP=m -CONFIG_SONY_LAPTOP=m -CONFIG_SONYPI_COMPAT=y +CONFIG_IBM_RTL=m CONFIG_IDEAPAD_LAPTOP=m +CONFIG_SENSORS_HDAPS=m CONFIG_THINKPAD_ACPI=m CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y # CONFIG_THINKPAD_ACPI_DEBUGFACILITIES is not set @@ -6006,52 +8073,111 @@ CONFIG_THINKPAD_ACPI_ALSA_SUPPORT=y # CONFIG_THINKPAD_ACPI_UNSAFE_LEDS is not set CONFIG_THINKPAD_ACPI_VIDEO=y CONFIG_THINKPAD_ACPI_HOTKEY_POLL=y -CONFIG_SENSORS_HDAPS=m +CONFIG_INTEL_ATOMISP2_LED=m +CONFIG_INTEL_CHT_INT33FE=m +CONFIG_INTEL_HID_EVENT=m +CONFIG_INTEL_INT0002_VGPIO=m CONFIG_INTEL_MENLOW=m -CONFIG_EEEPC_LAPTOP=m -CONFIG_ASUS_WMI=m -CONFIG_ASUS_NB_WMI=m -CONFIG_EEEPC_WMI=m -CONFIG_ACPI_WMI=m +CONFIG_INTEL_OAKTRAIL=m +CONFIG_INTEL_VBTN=m +CONFIG_MSI_LAPTOP=m CONFIG_MSI_WMI=m -CONFIG_TOPSTAR_LAPTOP=m +CONFIG_PCENGINES_APU2=m +CONFIG_SAMSUNG_LAPTOP=m +CONFIG_SAMSUNG_Q10=m CONFIG_ACPI_TOSHIBA=m CONFIG_TOSHIBA_BT_RFKILL=m CONFIG_TOSHIBA_HAPS=m CONFIG_TOSHIBA_WMI=m CONFIG_ACPI_CMPC=m +CONFIG_COMPAL_LAPTOP=m +CONFIG_LG_LAPTOP=m +CONFIG_PANASONIC_LAPTOP=m +CONFIG_SONY_LAPTOP=m +CONFIG_SONYPI_COMPAT=y +CONFIG_SYSTEM76_ACPI=m +CONFIG_TOPSTAR_LAPTOP=m +CONFIG_I2C_MULTI_INSTANTIATE=m +CONFIG_MLX_PLATFORM=m CONFIG_INTEL_IPS=m -CONFIG_IBM_RTL=m -CONFIG_SAMSUNG_LAPTOP=m -CONFIG_MXM_WMI=m -CONFIG_INTEL_OAKTRAIL=m -CONFIG_SAMSUNG_Q10=m -CONFIG_APPLE_GMUX=m CONFIG_INTEL_RST=m CONFIG_INTEL_SMARTCONNECT=m -CONFIG_PVPANIC=m -CONFIG_INTEL_PMC_IPC=m -CONFIG_SURFACE_PRO3_BUTTON=m + +# +# Intel Speed Select Technology interface support +# +CONFIG_INTEL_SPEED_SELECT_INTERFACE=m +# end of Intel Speed Select Technology interface support + +CONFIG_INTEL_TURBO_MAX_3=y +CONFIG_INTEL_UNCORE_FREQ_CONTROL=m +CONFIG_INTEL_BXTWC_PMIC_TMU=m +CONFIG_INTEL_CHTDC_TI_PWRBTN=m +CONFIG_INTEL_MRFLD_PWRBTN=m +CONFIG_INTEL_PMC_CORE=y +CONFIG_INTEL_PMT_CLASS=m +CONFIG_INTEL_PMT_TELEMETRY=m +CONFIG_INTEL_PMT_CRASHLOG=m +CONFIG_INTEL_PUNIT_IPC=m +CONFIG_INTEL_SCU_IPC=y +CONFIG_INTEL_SCU=y +CONFIG_INTEL_SCU_PCI=y +CONFIG_INTEL_SCU_PLATFORM=m +CONFIG_INTEL_SCU_IPC_UTIL=m +# CONFIG_INTEL_TELEMETRY is not set +CONFIG_PMC_ATOM=y CONFIG_CHROME_PLATFORMS=y CONFIG_CHROMEOS_LAPTOP=m CONFIG_CHROMEOS_PSTORE=m -CONFIG_CROS_EC_CHARDEV=m +CONFIG_CHROMEOS_TBMC=m +CONFIG_CROS_EC=m +CONFIG_CROS_EC_I2C=m +CONFIG_CROS_EC_ISHTP=m +# CONFIG_CROS_EC_SPI is not set CONFIG_CROS_EC_LPC=m CONFIG_CROS_EC_PROTO=y +CONFIG_CROS_KBD_LED_BACKLIGHT=m +CONFIG_CROS_EC_CHARDEV=m +CONFIG_CROS_EC_LIGHTBAR=m +# CONFIG_CROS_EC_DEBUGFS is not set +CONFIG_CROS_EC_SENSORHUB=m +CONFIG_CROS_EC_SYSFS=m +CONFIG_CROS_EC_TYPEC=m +CONFIG_CROS_USBPD_LOGGER=m +CONFIG_CROS_USBPD_NOTIFY=m +CONFIG_WILCO_EC=m +# CONFIG_WILCO_EC_DEBUGFS is not set +# CONFIG_WILCO_EC_EVENTS is not set +# CONFIG_WILCO_EC_TELEMETRY is not set +CONFIG_MELLANOX_PLATFORM=y +CONFIG_MLXREG_HOTPLUG=m +CONFIG_MLXREG_IO=m +CONFIG_SURFACE_PLATFORMS=y +# CONFIG_SURFACE3_WMI is not set +CONFIG_SURFACE_3_BUTTON=m +CONFIG_SURFACE_3_POWER_OPREGION=m +CONFIG_SURFACE_ACPI_NOTIFY=m +CONFIG_SURFACE_AGGREGATOR_CDEV=m +CONFIG_SURFACE_AGGREGATOR_REGISTRY=m +CONFIG_SURFACE_DTX=m +CONFIG_SURFACE_GPE=m +CONFIG_SURFACE_HOTPLUG=m +CONFIG_SURFACE_PLATFORM_PROFILE=m +CONFIG_SURFACE_PRO3_BUTTON=m +CONFIG_SURFACE_AGGREGATOR=m +CONFIG_SURFACE_AGGREGATOR_BUS=y +CONFIG_HAVE_CLK=y CONFIG_CLKDEV_LOOKUP=y CONFIG_HAVE_CLK_PREPARE=y CONFIG_COMMON_CLK=y - -# -# Common Clock Framework -# +# CONFIG_COMMON_CLK_MAX9485 is not set +# CONFIG_COMMON_CLK_SI5341 is not set CONFIG_COMMON_CLK_SI5351=m -# CONFIG_COMMON_CLK_PXA is not set +CONFIG_COMMON_CLK_SI544=m CONFIG_COMMON_CLK_CDCE706=m - -# -# Hardware Spinlock drivers -# +CONFIG_COMMON_CLK_CS2000_CP=m +CONFIG_XILINX_VCU=m +CONFIG_HWSPINLOCK=y # # Clock Source drivers @@ -6059,44 +8185,106 @@ CONFIG_COMMON_CLK_CDCE706=m CONFIG_CLKEVT_I8253=y CONFIG_I8253_LOCK=y CONFIG_CLKBLD_I8253=y -# CONFIG_ATMEL_PIT is not set -# CONFIG_SH_TIMER_CMT is not set -# CONFIG_SH_TIMER_MTU2 is not set -# CONFIG_SH_TIMER_TMU is not set -# CONFIG_EM_TIMER_STI is not set -# CONFIG_MAILBOX is not set +# end of Clock Source drivers + +CONFIG_MAILBOX=y +CONFIG_PCC=y +# CONFIG_ALTERA_MBOX is not set +CONFIG_IOMMU_IOVA=y +CONFIG_IOASID=y CONFIG_IOMMU_API=y CONFIG_IOMMU_SUPPORT=y # # Generic IOMMU Pagetable Support # -CONFIG_IOMMU_IOVA=y +CONFIG_IOMMU_IO_PGTABLE=y +# end of Generic IOMMU Pagetable Support + +# CONFIG_IOMMU_DEBUGFS is not set +# CONFIG_IOMMU_DEFAULT_PASSTHROUGH is not set +CONFIG_IOMMU_DMA=y CONFIG_AMD_IOMMU=y -# CONFIG_AMD_IOMMU_STATS is not set CONFIG_AMD_IOMMU_V2=m CONFIG_DMAR_TABLE=y CONFIG_INTEL_IOMMU=y CONFIG_INTEL_IOMMU_SVM=y # CONFIG_INTEL_IOMMU_DEFAULT_ON is not set CONFIG_INTEL_IOMMU_FLOPPY_WA=y +CONFIG_INTEL_IOMMU_SCALABLE_MODE_DEFAULT_ON=y CONFIG_IRQ_REMAP=y +CONFIG_HYPERV_IOMMU=y # # Remoteproc drivers # -CONFIG_REMOTEPROC=m -CONFIG_STE_MODEM_RPROC=m +CONFIG_REMOTEPROC=y +# CONFIG_REMOTEPROC_CDEV is not set +# end of Remoteproc drivers # # Rpmsg drivers # +CONFIG_RPMSG=m +# CONFIG_RPMSG_CHAR is not set +CONFIG_RPMSG_NS=m +# CONFIG_RPMSG_QCOM_GLINK_RPM is not set +CONFIG_RPMSG_VIRTIO=m +# end of Rpmsg drivers + +CONFIG_SOUNDWIRE=y + +# +# SoundWire Devices +# +CONFIG_SOUNDWIRE_CADENCE=m +CONFIG_SOUNDWIRE_INTEL=m +# CONFIG_SOUNDWIRE_QCOM is not set +CONFIG_SOUNDWIRE_GENERIC_ALLOCATION=m # # SOC (System On Chip) specific Drivers # -# CONFIG_SUNXI_SRAM is not set + +# +# Amlogic SoC drivers +# +# end of Amlogic SoC drivers + +# +# Broadcom SoC drivers +# +# end of Broadcom SoC drivers + +# +# NXP/Freescale QorIQ SoC drivers +# +# end of NXP/Freescale QorIQ SoC drivers + +# +# i.MX SoC drivers +# +# end of i.MX SoC drivers + +# +# Enable LiteX SoC Builder specific drivers +# +# end of Enable LiteX SoC Builder specific drivers + +# +# Qualcomm SoC drivers +# +CONFIG_QCOM_QMI_HELPERS=m +# end of Qualcomm SoC drivers + # CONFIG_SOC_TI is not set + +# +# Xilinx SoC drivers +# +# end of Xilinx SoC drivers +# end of SOC (System On Chip) specific Drivers + CONFIG_PM_DEVFREQ=y # @@ -6106,92 +8294,251 @@ CONFIG_DEVFREQ_GOV_SIMPLE_ONDEMAND=y CONFIG_DEVFREQ_GOV_PERFORMANCE=y CONFIG_DEVFREQ_GOV_POWERSAVE=y CONFIG_DEVFREQ_GOV_USERSPACE=y +CONFIG_DEVFREQ_GOV_PASSIVE=y # # DEVFREQ Drivers # CONFIG_PM_DEVFREQ_EVENT=y -CONFIG_EXTCON=m +CONFIG_EXTCON=y # # Extcon Device Drivers # CONFIG_EXTCON_ADC_JACK=m +CONFIG_EXTCON_FSA9480=m CONFIG_EXTCON_GPIO=m +CONFIG_EXTCON_INTEL_INT3496=m +CONFIG_EXTCON_INTEL_MRFLD=m +CONFIG_EXTCON_MAX3355=m +CONFIG_EXTCON_PTN5150=m CONFIG_EXTCON_RT8973A=m CONFIG_EXTCON_SM5502=m CONFIG_EXTCON_USB_GPIO=m +CONFIG_EXTCON_USBC_CROS_EC=m +CONFIG_EXTCON_USBC_TUSB320=m CONFIG_MEMORY=y CONFIG_IIO=m CONFIG_IIO_BUFFER=y -# CONFIG_IIO_BUFFER_CB is not set +CONFIG_IIO_BUFFER_CB=m +CONFIG_IIO_BUFFER_DMA=m +CONFIG_IIO_BUFFER_DMAENGINE=m +CONFIG_IIO_BUFFER_HW_CONSUMER=m CONFIG_IIO_KFIFO_BUF=m CONFIG_IIO_TRIGGERED_BUFFER=m +CONFIG_IIO_CONFIGFS=m CONFIG_IIO_TRIGGER=y CONFIG_IIO_CONSUMERS_PER_TRIGGER=2 +CONFIG_IIO_SW_DEVICE=m +CONFIG_IIO_SW_TRIGGER=m +CONFIG_IIO_TRIGGERED_EVENT=m # # Accelerometers # -CONFIG_BMA180=m +# CONFIG_ADIS16201 is not set +# CONFIG_ADIS16209 is not set +CONFIG_ADXL372=m +# CONFIG_ADXL372_SPI is not set +CONFIG_ADXL372_I2C=m +# CONFIG_BMA220 is not set +# CONFIG_BMA400 is not set CONFIG_BMC150_ACCEL=m CONFIG_BMC150_ACCEL_I2C=m +CONFIG_BMC150_ACCEL_SPI=m +# CONFIG_BMI088_ACCEL is not set +CONFIG_DA280=m +CONFIG_DA311=m +CONFIG_DMARD09=m +CONFIG_DMARD10=m CONFIG_HID_SENSOR_ACCEL_3D=m CONFIG_IIO_ST_ACCEL_3AXIS=m CONFIG_IIO_ST_ACCEL_I2C_3AXIS=m +CONFIG_IIO_ST_ACCEL_SPI_3AXIS=m +CONFIG_KXSD9=m +CONFIG_KXSD9_SPI=m +CONFIG_KXSD9_I2C=m CONFIG_KXCJK1013=m +CONFIG_MC3230=m +CONFIG_MMA7455=m +CONFIG_MMA7455_I2C=m +# CONFIG_MMA7455_SPI is not set +CONFIG_MMA7660=m CONFIG_MMA8452=m CONFIG_MMA9551_CORE=m CONFIG_MMA9551=m CONFIG_MMA9553=m CONFIG_MXC4005=m +CONFIG_MXC6255=m +# CONFIG_SCA3000 is not set CONFIG_STK8312=m CONFIG_STK8BA50=m +# end of Accelerometers # # Analog to digital converters # +# CONFIG_AD7091R5 is not set +# CONFIG_AD7124 is not set +# CONFIG_AD7192 is not set +# CONFIG_AD7266 is not set CONFIG_AD7291=m +CONFIG_AD7292=m +# CONFIG_AD7298 is not set +# CONFIG_AD7476 is not set +CONFIG_AD7606=m +CONFIG_AD7606_IFACE_PARALLEL=m +# CONFIG_AD7606_IFACE_SPI is not set +# CONFIG_AD7766 is not set +# CONFIG_AD7768_1 is not set +# CONFIG_AD7780 is not set +# CONFIG_AD7791 is not set +# CONFIG_AD7793 is not set +# CONFIG_AD7887 is not set +# CONFIG_AD7923 is not set +# CONFIG_AD7949 is not set CONFIG_AD799X=m CONFIG_CC10001_ADC=m +CONFIG_DLN2_ADC=m +# CONFIG_HI8435 is not set +CONFIG_HX711=m +CONFIG_INA2XX_ADC=m +CONFIG_INTEL_MRFLD_ADC=m +CONFIG_LTC2471=m +CONFIG_LTC2485=m +CONFIG_LTC2496=m +CONFIG_LTC2497=m +# CONFIG_MAX1027 is not set +# CONFIG_MAX11100 is not set +# CONFIG_MAX1118 is not set +CONFIG_MAX1241=m CONFIG_MAX1363=m +CONFIG_MAX9611=m +# CONFIG_MCP320X is not set CONFIG_MCP3422=m +# CONFIG_MCP3911 is not set CONFIG_NAU7802=m CONFIG_TI_ADC081C=m +# CONFIG_TI_ADC0832 is not set +# CONFIG_TI_ADC084S021 is not set +# CONFIG_TI_ADC12138 is not set +# CONFIG_TI_ADC108S102 is not set +# CONFIG_TI_ADC128S052 is not set +# CONFIG_TI_ADC161S626 is not set +CONFIG_TI_ADS1015=m +# CONFIG_TI_ADS7950 is not set +# CONFIG_TI_ADS131E08 is not set CONFIG_TI_AM335X_ADC=m +# CONFIG_TI_TLC4541 is not set CONFIG_VIPERBOARD_ADC=m +CONFIG_XILINX_XADC=m +# end of Analog to digital converters + +# +# Analog Front Ends +# +# end of Analog Front Ends # # Amplifiers # +# CONFIG_AD8366 is not set +CONFIG_HMC425=m +# end of Amplifiers + +# +# Capacitance to digital converters +# +CONFIG_AD7150=m +# end of Capacitance to digital converters # # Chemical Sensors # +# CONFIG_ATLAS_PH_SENSOR is not set +# CONFIG_ATLAS_EZO_SENSOR is not set +# CONFIG_BME680 is not set +# CONFIG_CCS811 is not set +# CONFIG_IAQCORE is not set +# CONFIG_PMS7003 is not set +CONFIG_SCD30_CORE=m +CONFIG_SCD30_I2C=m +CONFIG_SCD30_SERIAL=m +# CONFIG_SENSIRION_SGP30 is not set +# CONFIG_SPS30 is not set # CONFIG_VZ89X is not set +# end of Chemical Sensors + +# CONFIG_IIO_CROS_EC_SENSORS_CORE is not set # # Hid Sensor IIO Common # CONFIG_HID_SENSOR_IIO_COMMON=m CONFIG_HID_SENSOR_IIO_TRIGGER=m +# end of Hid Sensor IIO Common + CONFIG_IIO_MS_SENSORS_I2C=m # +# IIO SCMI Sensors +# +# end of IIO SCMI Sensors + +# # SSP Sensor Common # +# CONFIG_IIO_SSP_SENSORHUB is not set +# end of SSP Sensor Common + CONFIG_IIO_ST_SENSORS_I2C=m +CONFIG_IIO_ST_SENSORS_SPI=m CONFIG_IIO_ST_SENSORS_CORE=m # # Digital to analog converters # CONFIG_AD5064=m +# CONFIG_AD5360 is not set CONFIG_AD5380=m +# CONFIG_AD5421 is not set CONFIG_AD5446=m +# CONFIG_AD5449 is not set +CONFIG_AD5592R_BASE=m +# CONFIG_AD5592R is not set +CONFIG_AD5593R=m +# CONFIG_AD5504 is not set +# CONFIG_AD5624R_SPI is not set +CONFIG_AD5686=m +# CONFIG_AD5686_SPI is not set +CONFIG_AD5696_I2C=m +# CONFIG_AD5755 is not set +# CONFIG_AD5758 is not set +# CONFIG_AD5761 is not set +# CONFIG_AD5764 is not set +# CONFIG_AD5766 is not set +CONFIG_AD5770R=m +# CONFIG_AD5791 is not set +# CONFIG_AD7303 is not set +# CONFIG_AD8801 is not set +CONFIG_DS4424=m +# CONFIG_LTC1660 is not set +# CONFIG_LTC2632 is not set CONFIG_M62332=m CONFIG_MAX517=m CONFIG_MCP4725=m +# CONFIG_MCP4922 is not set +# CONFIG_TI_DAC082S085 is not set +CONFIG_TI_DAC5571=m +# CONFIG_TI_DAC7311 is not set +# CONFIG_TI_DAC7612 is not set +# end of Digital to analog converters + +# +# IIO dummy driver +# +# CONFIG_IIO_SIMPLE_DUMMY is not set +# end of IIO dummy driver # # Frequency Synthesizers DDS/PLL @@ -6200,50 +8547,116 @@ CONFIG_MCP4725=m # # Clock Generator/Distribution # +# CONFIG_AD9523 is not set +# end of Clock Generator/Distribution # # Phase-Locked Loop (PLL) frequency synthesizers # +# CONFIG_ADF4350 is not set +# CONFIG_ADF4371 is not set +# end of Phase-Locked Loop (PLL) frequency synthesizers +# end of Frequency Synthesizers DDS/PLL # # Digital gyroscope sensors # +# CONFIG_ADIS16080 is not set +# CONFIG_ADIS16130 is not set +# CONFIG_ADIS16136 is not set +# CONFIG_ADIS16260 is not set +CONFIG_ADXRS290=m +# CONFIG_ADXRS450 is not set CONFIG_BMG160=m CONFIG_BMG160_I2C=m +CONFIG_BMG160_SPI=m +CONFIG_FXAS21002C=m +CONFIG_FXAS21002C_I2C=m +CONFIG_FXAS21002C_SPI=m CONFIG_HID_SENSOR_GYRO_3D=m +CONFIG_MPU3050=m +CONFIG_MPU3050_I2C=m CONFIG_IIO_ST_GYRO_3AXIS=m CONFIG_IIO_ST_GYRO_I2C_3AXIS=m +CONFIG_IIO_ST_GYRO_SPI_3AXIS=m CONFIG_ITG3200=m +# end of Digital gyroscope sensors + +# +# Health Sensors +# + +# +# Heart Rate Monitors +# +# CONFIG_AFE4403 is not set +# CONFIG_AFE4404 is not set +# CONFIG_MAX30100 is not set +# CONFIG_MAX30102 is not set +# end of Heart Rate Monitors +# end of Health Sensors # # Humidity sensors # +# CONFIG_AM2315 is not set CONFIG_DHT11=m CONFIG_HDC100X=m +CONFIG_HDC2010=m +CONFIG_HID_SENSOR_HUMIDITY=m +CONFIG_HTS221=m +CONFIG_HTS221_I2C=m +CONFIG_HTS221_SPI=m CONFIG_HTU21=m CONFIG_SI7005=m CONFIG_SI7020=m +# end of Humidity sensors # # Inertial measurement units # +# CONFIG_ADIS16400 is not set +# CONFIG_ADIS16460 is not set +CONFIG_ADIS16475=m +# CONFIG_ADIS16480 is not set +# CONFIG_BMI160_I2C is not set +# CONFIG_BMI160_SPI is not set +CONFIG_FXOS8700=m +CONFIG_FXOS8700_I2C=m +CONFIG_FXOS8700_SPI=m CONFIG_KMX61=m -CONFIG_INV_MPU6050_IIO=m +CONFIG_INV_ICM42600=m +CONFIG_INV_ICM42600_I2C=m +CONFIG_INV_ICM42600_SPI=m +# CONFIG_INV_MPU6050_I2C is not set +# CONFIG_INV_MPU6050_SPI is not set +# CONFIG_IIO_ST_LSM6DSX is not set +# end of Inertial measurement units + +CONFIG_IIO_ADIS_LIB=m +CONFIG_IIO_ADIS_LIB_BUFFER=y # # Light sensors # CONFIG_ACPI_ALS=m CONFIG_ADJD_S311=m +CONFIG_ADUX1020=m +CONFIG_AL3010=m CONFIG_AL3320A=m CONFIG_APDS9300=m CONFIG_APDS9960=m +# CONFIG_AS73211 is not set CONFIG_BH1750=m +# CONFIG_BH1780 is not set CONFIG_CM32181=m CONFIG_CM3232=m CONFIG_CM3323=m CONFIG_CM36651=m +CONFIG_GP2AP002=m CONFIG_GP2AP020A00F=m +CONFIG_SENSORS_ISL29018=m +CONFIG_SENSORS_ISL29028=m CONFIG_ISL29125=m CONFIG_HID_SENSOR_ALS=m CONFIG_HID_SENSOR_PROX=m @@ -6251,168 +8664,307 @@ CONFIG_JSA1212=m CONFIG_RPR0521=m CONFIG_SENSORS_LM3533=m CONFIG_LTR501=m +CONFIG_LV0104CS=m +# CONFIG_MAX44000 is not set +CONFIG_MAX44009=m +CONFIG_NOA1305=m CONFIG_OPT3001=m CONFIG_PA12203001=m +CONFIG_SI1133=m +# CONFIG_SI1145 is not set CONFIG_STK3310=m +CONFIG_ST_UVIS25=m +CONFIG_ST_UVIS25_I2C=m +CONFIG_ST_UVIS25_SPI=m CONFIG_TCS3414=m CONFIG_TCS3472=m CONFIG_SENSORS_TSL2563=m +CONFIG_TSL2583=m +CONFIG_TSL2772=m CONFIG_TSL4531=m CONFIG_US5182D=m CONFIG_VCNL4000=m +CONFIG_VCNL4035=m +CONFIG_VEML6030=m +# CONFIG_VEML6070 is not set +CONFIG_VL6180=m +CONFIG_ZOPT2201=m +# end of Light sensors # # Magnetometer sensors # CONFIG_AK8975=m CONFIG_AK09911=m -CONFIG_BMC150_MAGN=m +# CONFIG_BMC150_MAGN_I2C is not set +# CONFIG_BMC150_MAGN_SPI is not set CONFIG_MAG3110=m CONFIG_HID_SENSOR_MAGNETOMETER_3D=m CONFIG_MMC35240=m CONFIG_IIO_ST_MAGN_3AXIS=m CONFIG_IIO_ST_MAGN_I2C_3AXIS=m +CONFIG_IIO_ST_MAGN_SPI_3AXIS=m +CONFIG_SENSORS_HMC5843=m +CONFIG_SENSORS_HMC5843_I2C=m +# CONFIG_SENSORS_HMC5843_SPI is not set +CONFIG_SENSORS_RM3100=m +CONFIG_SENSORS_RM3100_I2C=m +# CONFIG_SENSORS_RM3100_SPI is not set +# CONFIG_YAMAHA_YAS530 is not set +# end of Magnetometer sensors + +# +# Multiplexers +# +# end of Multiplexers # # Inclinometer sensors # CONFIG_HID_SENSOR_INCLINOMETER_3D=m CONFIG_HID_SENSOR_DEVICE_ROTATION=m +# end of Inclinometer sensors # # Triggers - standalone # +# CONFIG_IIO_HRTIMER_TRIGGER is not set CONFIG_IIO_INTERRUPT_TRIGGER=m +CONFIG_IIO_TIGHTLOOP_TRIGGER=m CONFIG_IIO_SYSFS_TRIGGER=m +# end of Triggers - standalone + +# +# Linear and angular position sensors +# +CONFIG_HID_SENSOR_CUSTOM_INTEL_HINGE=m +# end of Linear and angular position sensors # # Digital potentiometers # +CONFIG_AD5272=m +# CONFIG_DS1803 is not set +# CONFIG_MAX5432 is not set +# CONFIG_MAX5481 is not set +# CONFIG_MAX5487 is not set +CONFIG_MCP4018=m +# CONFIG_MCP4131 is not set CONFIG_MCP4531=m +# CONFIG_MCP41010 is not set +# CONFIG_TPL0102 is not set +# end of Digital potentiometers + +# +# Digital potentiostats +# +CONFIG_LMP91000=m +# end of Digital potentiostats # # Pressure sensors # +CONFIG_ABP060MG=m CONFIG_BMP280=m +CONFIG_BMP280_I2C=m +CONFIG_BMP280_SPI=m +# CONFIG_DLHL60D is not set +# CONFIG_DPS310 is not set CONFIG_HID_SENSOR_PRESS=m -CONFIG_MPL115=m +# CONFIG_HP03 is not set +CONFIG_ICP10100=m +# CONFIG_MPL115_I2C is not set +# CONFIG_MPL115_SPI is not set CONFIG_MPL3115=m CONFIG_MS5611=m CONFIG_MS5611_I2C=m +# CONFIG_MS5611_SPI is not set CONFIG_MS5637=m CONFIG_IIO_ST_PRESS=m CONFIG_IIO_ST_PRESS_I2C=m +CONFIG_IIO_ST_PRESS_SPI=m CONFIG_T5403=m +# CONFIG_HP206C is not set +# CONFIG_ZPA2326 is not set +# end of Pressure sensors # # Lightning sensors # +# CONFIG_AS3935 is not set +# end of Lightning sensors # -# Proximity sensors +# Proximity and distance sensors # +CONFIG_CROS_EC_MKBP_PROXIMITY=m +# CONFIG_ISL29501 is not set # CONFIG_LIDAR_LITE_V2 is not set +# CONFIG_MB1232 is not set +# CONFIG_PING is not set +# CONFIG_RFD77402 is not set +# CONFIG_SRF04 is not set +CONFIG_SX9310=m CONFIG_SX9500=m +# CONFIG_SRF08 is not set +CONFIG_VCNL3020=m +CONFIG_VL53L0X_I2C=m +# end of Proximity and distance sensors + +# +# Resolver to digital converters +# +# CONFIG_AD2S90 is not set +# CONFIG_AD2S1200 is not set +# end of Resolver to digital converters # # Temperature sensors # +CONFIG_LTC2983=m +# CONFIG_MAXIM_THERMOCOUPLE is not set +CONFIG_HID_SENSOR_TEMP=m CONFIG_MLX90614=m +CONFIG_MLX90632=m CONFIG_TMP006=m +CONFIG_TMP007=m CONFIG_TSYS01=m CONFIG_TSYS02D=m +# CONFIG_MAX31856 is not set +# end of Temperature sensors + CONFIG_NTB=m +# CONFIG_NTB_MSI is not set +CONFIG_NTB_AMD=m +CONFIG_NTB_IDT=m CONFIG_NTB_INTEL=m +CONFIG_NTB_EPF=m +CONFIG_NTB_SWITCHTEC=m CONFIG_NTB_PINGPONG=m CONFIG_NTB_TOOL=m +CONFIG_NTB_PERF=m CONFIG_NTB_TRANSPORT=m # CONFIG_VME_BUS is not set # CONFIG_PWM is not set + +# +# IRQ chip support +# +# end of IRQ chip support + # CONFIG_IPACK_BUS is not set CONFIG_RESET_CONTROLLER=y -CONFIG_FMC=m -CONFIG_FMC_FAKEDEV=m -CONFIG_FMC_TRIVIAL=m -CONFIG_FMC_WRITE_EEPROM=m -CONFIG_FMC_CHARDEV=m +# CONFIG_RESET_TI_SYSCON is not set # # PHY Subsystem # CONFIG_GENERIC_PHY=y +CONFIG_USB_LGM_PHY=m +# CONFIG_BCM_KONA_USB2_PHY is not set # CONFIG_PHY_PXA_28NM_HSIC is not set # CONFIG_PHY_PXA_28NM_USB2 is not set -# CONFIG_BCM_KONA_USB2_PHY is not set +# CONFIG_PHY_CPCAP_USB is not set +# CONFIG_PHY_QCOM_USB_HS is not set +# CONFIG_PHY_QCOM_USB_HSIC is not set # CONFIG_PHY_TUSB1210 is not set +CONFIG_PHY_INTEL_LGM_EMMC=m +# end of PHY Subsystem + CONFIG_POWERCAP=y +CONFIG_INTEL_RAPL_CORE=m CONFIG_INTEL_RAPL=m +# CONFIG_IDLE_INJECT is not set +# CONFIG_DTPM is not set # CONFIG_MCB is not set # # Performance monitor support # +# end of Performance monitor support + CONFIG_RAS=y -# CONFIG_AMD_MCE_INJ is not set -CONFIG_THUNDERBOLT=m +CONFIG_RAS_CEC=y +# CONFIG_RAS_CEC_DEBUG is not set +CONFIG_USB4=m +# CONFIG_USB4_DEBUGFS_WRITE is not set +# CONFIG_USB4_DMA_TEST is not set # # Android # # CONFIG_ANDROID is not set +# end of Android + CONFIG_LIBNVDIMM=y CONFIG_BLK_DEV_PMEM=m CONFIG_ND_BLK=m CONFIG_ND_CLAIM=y CONFIG_ND_BTT=m CONFIG_BTT=y -CONFIG_NVMEM=m +CONFIG_ND_PFN=m +CONFIG_NVDIMM_PFN=y +CONFIG_NVDIMM_DAX=y +CONFIG_NVDIMM_KEYS=y +CONFIG_DAX_DRIVER=y +CONFIG_DAX=y +CONFIG_DEV_DAX=m +CONFIG_DEV_DAX_PMEM=m +CONFIG_DEV_DAX_HMEM=m +CONFIG_DEV_DAX_HMEM_DEVICES=y +CONFIG_DEV_DAX_KMEM=m +# CONFIG_DEV_DAX_PMEM_COMPAT is not set +CONFIG_NVMEM=y +CONFIG_NVMEM_SYSFS=y +CONFIG_NVMEM_RMEM=m + +# +# HW tracing support +# CONFIG_STM=m +CONFIG_STM_PROTO_BASIC=m +CONFIG_STM_PROTO_SYS_T=m CONFIG_STM_DUMMY=m CONFIG_STM_SOURCE_CONSOLE=m +CONFIG_STM_SOURCE_HEARTBEAT=m +# CONFIG_STM_SOURCE_FTRACE is not set CONFIG_INTEL_TH=m CONFIG_INTEL_TH_PCI=m +CONFIG_INTEL_TH_ACPI=m CONFIG_INTEL_TH_GTH=m CONFIG_INTEL_TH_STH=m CONFIG_INTEL_TH_MSU=m CONFIG_INTEL_TH_PTI=m # CONFIG_INTEL_TH_DEBUG is not set +# end of HW tracing support -# -# FPGA Configuration Support -# # CONFIG_FPGA is not set +# CONFIG_TEE is not set +CONFIG_MULTIPLEXER=m # -# Firmware Drivers +# Multiplexer drivers # -CONFIG_EDD=m -CONFIG_EDD_OFF=y -CONFIG_FIRMWARE_MEMMAP=y -CONFIG_DELL_RBU=m -CONFIG_DCDBAS=m -CONFIG_DMIID=y -CONFIG_DMI_SYSFS=m -CONFIG_DMI_SCAN_MACHINE_NON_EFI_FALLBACK=y -CONFIG_ISCSI_IBFT_FIND=y -CONFIG_ISCSI_IBFT=m -# CONFIG_GOOGLE_FIRMWARE is not set +CONFIG_MUX_ADG792A=m +CONFIG_MUX_ADGS1408=m +CONFIG_MUX_GPIO=m +# end of Multiplexer drivers -# -# EFI (Extensible Firmware Interface) Support -# -CONFIG_EFI_VARS=m -CONFIG_EFI_ESRT=y -CONFIG_EFI_VARS_PSTORE=m -CONFIG_EFI_VARS_PSTORE_DEFAULT_DISABLE=y -CONFIG_EFI_RUNTIME_MAP=y -# CONFIG_EFI_FAKE_MEMMAP is not set -CONFIG_EFI_RUNTIME_WRAPPERS=y -CONFIG_UEFI_CPER=y +CONFIG_PM_OPP=y +# CONFIG_UNISYS_VISORBUS is not set +# CONFIG_SIOX is not set +# CONFIG_SLIMBUS is not set +# CONFIG_INTERCONNECT is not set +# CONFIG_COUNTER is not set +# CONFIG_MOST is not set +# end of Device Drivers # # File systems # CONFIG_DCACHE_WORD_ACCESS=y +# CONFIG_VALIDATE_FS_PARSER is not set +CONFIG_FS_IOMAP=y CONFIG_EXT2_FS=m CONFIG_EXT2_FS_XATTR=y CONFIG_EXT2_FS_POSIX_ACL=y @@ -6423,8 +8975,6 @@ CONFIG_EXT3_FS_SECURITY=y CONFIG_EXT4_FS=m CONFIG_EXT4_FS_POSIX_ACL=y CONFIG_EXT4_FS_SECURITY=y -CONFIG_EXT4_ENCRYPTION=m -CONFIG_EXT4_FS_ENCRYPTION=y # CONFIG_EXT4_DEBUG is not set CONFIG_JBD2=m # CONFIG_JBD2_DEBUG is not set @@ -6441,9 +8991,12 @@ CONFIG_JFS_SECURITY=y # CONFIG_JFS_DEBUG is not set # CONFIG_JFS_STATISTICS is not set CONFIG_XFS_FS=m +CONFIG_XFS_SUPPORT_V4=y CONFIG_XFS_QUOTA=y CONFIG_XFS_POSIX_ACL=y # CONFIG_XFS_RT is not set +CONFIG_XFS_ONLINE_SCRUB=y +# CONFIG_XFS_ONLINE_REPAIR is not set # CONFIG_XFS_WARN is not set # CONFIG_XFS_DEBUG is not set CONFIG_GFS2_FS=m @@ -6460,19 +9013,33 @@ CONFIG_BTRFS_FS_POSIX_ACL=y # CONFIG_BTRFS_FS_RUN_SANITY_TESTS is not set # CONFIG_BTRFS_DEBUG is not set # CONFIG_BTRFS_ASSERT is not set +# CONFIG_BTRFS_FS_REF_VERIFY is not set CONFIG_NILFS2_FS=m CONFIG_F2FS_FS=m CONFIG_F2FS_STAT_FS=y CONFIG_F2FS_FS_XATTR=y CONFIG_F2FS_FS_POSIX_ACL=y -# CONFIG_F2FS_FS_SECURITY is not set +CONFIG_F2FS_FS_SECURITY=y # CONFIG_F2FS_CHECK_FS is not set -CONFIG_F2FS_FS_ENCRYPTION=y -# CONFIG_F2FS_IO_TRACE is not set +# CONFIG_F2FS_FAULT_INJECTION is not set +CONFIG_F2FS_FS_COMPRESSION=y +CONFIG_F2FS_FS_LZO=y +CONFIG_F2FS_FS_LZ4=y +CONFIG_F2FS_FS_LZ4HC=y +CONFIG_F2FS_FS_ZSTD=y +CONFIG_F2FS_FS_LZORLE=y +# CONFIG_ZONEFS_FS is not set CONFIG_FS_DAX=y +CONFIG_FS_DAX_PMD=y CONFIG_FS_POSIX_ACL=y CONFIG_EXPORTFS=y +CONFIG_EXPORTFS_BLOCK_OPS=y CONFIG_FILE_LOCKING=y +# CONFIG_MANDATORY_FILE_LOCKING is not set +CONFIG_FS_ENCRYPTION=y +CONFIG_FS_ENCRYPTION_ALGS=m +CONFIG_FS_ENCRYPTION_INLINE_CRYPT=y +# CONFIG_FS_VERITY is not set CONFIG_FSNOTIFY=y CONFIG_DNOTIFY=y CONFIG_INOTIFY_USER=y @@ -6486,15 +9053,24 @@ CONFIG_QUOTA_TREE=m CONFIG_QFMT_V1=m CONFIG_QFMT_V2=m CONFIG_QUOTACTL=y -CONFIG_QUOTACTL_COMPAT=y CONFIG_AUTOFS4_FS=m +CONFIG_AUTOFS_FS=m CONFIG_FUSE_FS=m CONFIG_CUSE=m +CONFIG_VIRTIO_FS=m +CONFIG_FUSE_DAX=y CONFIG_OVERLAY_FS=m +# CONFIG_OVERLAY_FS_REDIRECT_DIR is not set +CONFIG_OVERLAY_FS_REDIRECT_ALWAYS_FOLLOW=y +# CONFIG_OVERLAY_FS_INDEX is not set +# CONFIG_OVERLAY_FS_XINO_AUTO is not set +# CONFIG_OVERLAY_FS_METACOPY is not set # # Caches # +CONFIG_NETFS_SUPPORT=m +CONFIG_NETFS_STATS=y CONFIG_FSCACHE=m # CONFIG_FSCACHE_STATS is not set # CONFIG_FSCACHE_HISTOGRAM is not set @@ -6503,6 +9079,7 @@ CONFIG_FSCACHE=m CONFIG_CACHEFILES=m # CONFIG_CACHEFILES_DEBUG is not set # CONFIG_CACHEFILES_HISTOGRAM is not set +# end of Caches # # CD-ROM/DVD Filesystems @@ -6511,38 +9088,52 @@ CONFIG_ISO9660_FS=m CONFIG_JOLIET=y CONFIG_ZISOFS=y CONFIG_UDF_FS=m -CONFIG_UDF_NLS=y +# end of CD-ROM/DVD Filesystems # -# DOS/FAT/NT Filesystems +# DOS/FAT/EXFAT/NT Filesystems # CONFIG_FAT_FS=m CONFIG_MSDOS_FS=m CONFIG_VFAT_FS=m CONFIG_FAT_DEFAULT_CODEPAGE=437 CONFIG_FAT_DEFAULT_IOCHARSET="iso8859-1" +CONFIG_FAT_DEFAULT_UTF8=y +CONFIG_EXFAT_FS=m +CONFIG_EXFAT_DEFAULT_IOCHARSET="utf8" CONFIG_NTFS_FS=m # CONFIG_NTFS_DEBUG is not set CONFIG_NTFS_RW=y +# end of DOS/FAT/EXFAT/NT Filesystems # # Pseudo filesystems # CONFIG_PROC_FS=y CONFIG_PROC_KCORE=y +CONFIG_PROC_VMCORE=y +# CONFIG_PROC_VMCORE_DEVICE_DUMP is not set CONFIG_PROC_SYSCTL=y CONFIG_PROC_PAGE_MONITOR=y CONFIG_PROC_CHILDREN=y +CONFIG_PROC_PID_ARCH_STATUS=y +CONFIG_PROC_CPU_RESCTRL=y CONFIG_KERNFS=y CONFIG_SYSFS=y CONFIG_TMPFS=y CONFIG_TMPFS_POSIX_ACL=y CONFIG_TMPFS_XATTR=y -# CONFIG_HUGETLBFS is not set -# CONFIG_HUGETLB_PAGE is not set +CONFIG_TMPFS_INODE64=y +CONFIG_HUGETLBFS=y +CONFIG_HUGETLB_PAGE=y +CONFIG_MEMFD_CREATE=y +CONFIG_ARCH_HAS_GIGANTIC_PAGE=y CONFIG_CONFIGFS_FS=y CONFIG_EFIVAR_FS=m +# end of Pseudo filesystems + CONFIG_MISC_FILESYSTEMS=y +CONFIG_ORANGEFS_FS=m CONFIG_ADFS_FS=m # CONFIG_ADFS_FS_RW is not set CONFIG_AFFS_FS=m @@ -6550,7 +9141,6 @@ CONFIG_ECRYPT_FS=m CONFIG_ECRYPT_FS_MESSAGING=y CONFIG_HFS_FS=m CONFIG_HFSPLUS_FS=m -# CONFIG_HFSPLUS_FS_POSIX_ACL is not set CONFIG_BEFS_FS=m # CONFIG_BEFS_DEBUG is not set CONFIG_BFS_FS=m @@ -6563,16 +9153,19 @@ CONFIG_JFFS2_FS_WRITEBUFFER=y # CONFIG_JFFS2_FS_XATTR is not set # CONFIG_JFFS2_COMPRESSION_OPTIONS is not set CONFIG_JFFS2_ZLIB=y -# CONFIG_JFFS2_LZO is not set CONFIG_JFFS2_RTIME=y -# CONFIG_JFFS2_RUBIN is not set CONFIG_UBIFS_FS=m CONFIG_UBIFS_FS_ADVANCED_COMPR=y CONFIG_UBIFS_FS_LZO=y CONFIG_UBIFS_FS_ZLIB=y +CONFIG_UBIFS_FS_ZSTD=y CONFIG_UBIFS_ATIME_SUPPORT=y -CONFIG_LOGFS=m +CONFIG_UBIFS_FS_XATTR=y +CONFIG_UBIFS_FS_SECURITY=y +CONFIG_UBIFS_FS_AUTHENTICATION=y CONFIG_CRAMFS=m +CONFIG_CRAMFS_BLOCKDEV=y +CONFIG_CRAMFS_MTD=y CONFIG_SQUASHFS=m # CONFIG_SQUASHFS_FILE_CACHE is not set CONFIG_SQUASHFS_FILE_DIRECT=y @@ -6584,6 +9177,7 @@ CONFIG_SQUASHFS_ZLIB=y CONFIG_SQUASHFS_LZ4=y CONFIG_SQUASHFS_LZO=y CONFIG_SQUASHFS_XZ=y +CONFIG_SQUASHFS_ZSTD=y # CONFIG_SQUASHFS_4K_DEVBLK_SIZE is not set CONFIG_SQUASHFS_EMBEDDED=y CONFIG_SQUASHFS_FRAGMENT_CACHE_SIZE=3 @@ -6598,6 +9192,18 @@ CONFIG_ROMFS_FS=y CONFIG_ROMFS_BACKED_BY_BLOCK=y CONFIG_ROMFS_ON_BLOCK=y CONFIG_PSTORE=y +CONFIG_PSTORE_DEFAULT_KMSG_BYTES=10240 +CONFIG_PSTORE_DEFLATE_COMPRESS=y +# CONFIG_PSTORE_LZO_COMPRESS is not set +# CONFIG_PSTORE_LZ4_COMPRESS is not set +CONFIG_PSTORE_LZ4HC_COMPRESS=m +CONFIG_PSTORE_842_COMPRESS=y +# CONFIG_PSTORE_ZSTD_COMPRESS is not set +CONFIG_PSTORE_COMPRESS=y +CONFIG_PSTORE_DEFLATE_COMPRESS_DEFAULT=y +# CONFIG_PSTORE_LZ4HC_COMPRESS_DEFAULT is not set +# CONFIG_PSTORE_842_COMPRESS_DEFAULT is not set +CONFIG_PSTORE_COMPRESS_DEFAULT="deflate" # CONFIG_PSTORE_CONSOLE is not set # CONFIG_PSTORE_PMSG is not set # CONFIG_PSTORE_FTRACE is not set @@ -6606,66 +9212,76 @@ CONFIG_SYSV_FS=m CONFIG_UFS_FS=m # CONFIG_UFS_FS_WRITE is not set # CONFIG_UFS_DEBUG is not set -CONFIG_EXOFS_FS=m -# CONFIG_EXOFS_DEBUG is not set -CONFIG_ORE=m +# CONFIG_EROFS_FS is not set +CONFIG_VBOXSF_FS=m CONFIG_NETWORK_FILESYSTEMS=y CONFIG_NFS_FS=y CONFIG_NFS_V2=y CONFIG_NFS_V3=y -# CONFIG_NFS_V3_ACL is not set +CONFIG_NFS_V3_ACL=y CONFIG_NFS_V4=y CONFIG_NFS_SWAP=y -# CONFIG_NFS_V4_1 is not set +CONFIG_NFS_V4_1=y +CONFIG_NFS_V4_2=y +CONFIG_PNFS_FILE_LAYOUT=y +CONFIG_PNFS_BLOCK=y +CONFIG_PNFS_FLEXFILE_LAYOUT=y +CONFIG_NFS_V4_1_IMPLEMENTATION_ID_DOMAIN="kernel.org" +# CONFIG_NFS_V4_1_MIGRATION is not set +CONFIG_NFS_V4_SECURITY_LABEL=y # CONFIG_NFS_USE_LEGACY_DNS is not set CONFIG_NFS_USE_KERNEL_DNS=y +# CONFIG_NFS_DISABLE_UDP_SUPPORT is not set +# CONFIG_NFS_V4_2_READ_PLUS is not set CONFIG_NFSD=m +CONFIG_NFSD_V2_ACL=y CONFIG_NFSD_V3=y -# CONFIG_NFSD_V3_ACL is not set +CONFIG_NFSD_V3_ACL=y CONFIG_NFSD_V4=y CONFIG_NFSD_PNFS=y +CONFIG_NFSD_BLOCKLAYOUT=y +CONFIG_NFSD_SCSILAYOUT=y +CONFIG_NFSD_FLEXFILELAYOUT=y +CONFIG_NFSD_V4_2_INTER_SSC=y # CONFIG_NFSD_V4_SECURITY_LABEL is not set -# CONFIG_NFSD_FAULT_INJECTION is not set CONFIG_GRACE_PERIOD=y CONFIG_LOCKD=y CONFIG_LOCKD_V4=y +CONFIG_NFS_ACL_SUPPORT=y CONFIG_NFS_COMMON=y +CONFIG_NFS_V4_2_SSC_HELPER=y CONFIG_SUNRPC=y CONFIG_SUNRPC_GSS=y +CONFIG_SUNRPC_BACKCHANNEL=y CONFIG_SUNRPC_SWAP=y CONFIG_RPCSEC_GSS_KRB5=m +# CONFIG_SUNRPC_DISABLE_INSECURE_ENCTYPES is not set # CONFIG_SUNRPC_DEBUG is not set CONFIG_SUNRPC_XPRT_RDMA=m CONFIG_CEPH_FS=m CONFIG_CEPH_FSCACHE=y CONFIG_CEPH_FS_POSIX_ACL=y +# CONFIG_CEPH_FS_SECURITY_LABEL is not set CONFIG_CIFS=m -# CONFIG_CIFS_STATS is not set +# CONFIG_CIFS_STATS2 is not set +CONFIG_CIFS_ALLOW_INSECURE_LEGACY=y CONFIG_CIFS_WEAK_PW_HASH=y -# CONFIG_CIFS_UPCALL is not set -# CONFIG_CIFS_XATTR is not set -CONFIG_CIFS_DEBUG=y -# CONFIG_CIFS_DEBUG2 is not set +CONFIG_CIFS_UPCALL=y +CONFIG_CIFS_XATTR=y +CONFIG_CIFS_POSIX=y +# CONFIG_CIFS_DEBUG is not set CONFIG_CIFS_DFS_UPCALL=y -CONFIG_CIFS_SMB2=y -# CONFIG_CIFS_SMB311 is not set +CONFIG_CIFS_SWN_UPCALL=y +# CONFIG_CIFS_SMB_DIRECT is not set CONFIG_CIFS_FSCACHE=y -CONFIG_NCP_FS=m -CONFIG_NCPFS_PACKET_SIGNING=y -CONFIG_NCPFS_IOCTL_LOCKING=y -CONFIG_NCPFS_STRONG=y -CONFIG_NCPFS_NFS_NS=y -CONFIG_NCPFS_OS2_NS=y -CONFIG_NCPFS_SMALLDOS=y -CONFIG_NCPFS_NLS=y -CONFIG_NCPFS_EXTRAS=y CONFIG_CODA_FS=m CONFIG_AFS_FS=m # CONFIG_AFS_DEBUG is not set # CONFIG_AFS_FSCACHE is not set +# CONFIG_AFS_DEBUG_CURSOR is not set CONFIG_9P_FS=m # CONFIG_9P_FSCACHE is not set -# CONFIG_9P_FS_POSIX_ACL is not set +CONFIG_9P_FS_POSIX_ACL=y # CONFIG_9P_FS_SECURITY is not set CONFIG_NLS=y CONFIG_NLS_DEFAULT="utf8" @@ -6720,252 +9336,68 @@ CONFIG_NLS_MAC_TURKISH=m CONFIG_NLS_UTF8=m CONFIG_DLM=m # CONFIG_DLM_DEBUG is not set - -# -# Kernel hacking -# -CONFIG_TRACE_IRQFLAGS_SUPPORT=y - -# -# printk and dmesg options -# -CONFIG_PRINTK_TIME=y -CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 -# CONFIG_BOOT_PRINTK_DELAY is not set -# CONFIG_DYNAMIC_DEBUG is not set - -# -# Compile-time checks and compiler options -# -# CONFIG_DEBUG_INFO is not set -CONFIG_ENABLE_WARN_DEPRECATED=y -CONFIG_ENABLE_MUST_CHECK=y -CONFIG_FRAME_WARN=0 -CONFIG_STRIP_ASM_SYMS=y -# CONFIG_READABLE_ASM is not set -CONFIG_UNUSED_SYMBOLS=y -# CONFIG_PAGE_OWNER is not set -CONFIG_DEBUG_FS=y -# CONFIG_HEADERS_CHECK is not set -# CONFIG_DEBUG_SECTION_MISMATCH is not set -CONFIG_SECTION_MISMATCH_WARN_ONLY=y -CONFIG_ARCH_WANT_FRAME_POINTERS=y -CONFIG_FRAME_POINTER=y -# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set -CONFIG_MAGIC_SYSRQ=y -CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 -CONFIG_DEBUG_KERNEL=y - -# -# Memory Debugging -# -# CONFIG_PAGE_EXTENSION is not set -# CONFIG_DEBUG_PAGEALLOC is not set -# CONFIG_DEBUG_OBJECTS is not set -# CONFIG_SLUB_DEBUG_ON is not set -# CONFIG_SLUB_STATS is not set -CONFIG_HAVE_DEBUG_KMEMLEAK=y -# CONFIG_DEBUG_KMEMLEAK is not set -# CONFIG_DEBUG_STACK_USAGE is not set -# CONFIG_DEBUG_VM is not set -# CONFIG_DEBUG_VIRTUAL is not set -CONFIG_DEBUG_MEMORY_INIT=y -# CONFIG_DEBUG_PER_CPU_MAPS is not set -CONFIG_HAVE_DEBUG_STACKOVERFLOW=y -# CONFIG_DEBUG_STACKOVERFLOW is not set -CONFIG_HAVE_ARCH_KMEMCHECK=y -CONFIG_HAVE_ARCH_KASAN=y -# CONFIG_KASAN is not set -# CONFIG_DEBUG_SHIRQ is not set - -# -# Debug Lockups and Hangs -# -# CONFIG_LOCKUP_DETECTOR is not set -# CONFIG_DETECT_HUNG_TASK is not set -# CONFIG_PANIC_ON_OOPS is not set -CONFIG_PANIC_ON_OOPS_VALUE=0 -CONFIG_PANIC_TIMEOUT=0 -CONFIG_SCHED_DEBUG=y -CONFIG_SCHED_INFO=y -# CONFIG_SCHEDSTATS is not set -# CONFIG_SCHED_STACK_END_CHECK is not set -# CONFIG_DEBUG_TIMEKEEPING is not set -# CONFIG_TIMER_STATS is not set - -# -# Lock Debugging (spinlocks, mutexes, etc...) -# -# CONFIG_DEBUG_RT_MUTEXES is not set -# CONFIG_DEBUG_SPINLOCK is not set -# CONFIG_DEBUG_MUTEXES is not set -# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set -# CONFIG_DEBUG_LOCK_ALLOC is not set -# CONFIG_PROVE_LOCKING is not set -# CONFIG_LOCK_STAT is not set -# CONFIG_DEBUG_ATOMIC_SLEEP is not set -# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set -# CONFIG_LOCK_TORTURE_TEST is not set -CONFIG_STACKTRACE=y -# CONFIG_DEBUG_KOBJECT is not set -CONFIG_DEBUG_BUGVERBOSE=y -# CONFIG_DEBUG_LIST is not set -# CONFIG_DEBUG_PI_LIST is not set -# CONFIG_DEBUG_SG is not set -# CONFIG_DEBUG_NOTIFIERS is not set -# CONFIG_DEBUG_CREDENTIALS is not set - -# -# RCU Debugging -# -# CONFIG_PROVE_RCU is not set -# CONFIG_SPARSE_RCU_POINTER is not set -# CONFIG_TORTURE_TEST is not set -# CONFIG_RCU_TORTURE_TEST is not set -CONFIG_RCU_CPU_STALL_TIMEOUT=60 -# CONFIG_RCU_TRACE is not set -# CONFIG_RCU_EQS_DEBUG is not set -# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set -# CONFIG_NOTIFIER_ERROR_INJECTION is not set -# CONFIG_FAULT_INJECTION is not set -# CONFIG_LATENCYTOP is not set -CONFIG_ARCH_HAS_DEBUG_STRICT_USER_COPY_CHECKS=y -# CONFIG_DEBUG_STRICT_USER_COPY_CHECKS is not set -CONFIG_USER_STACKTRACE_SUPPORT=y -CONFIG_NOP_TRACER=y -CONFIG_HAVE_FUNCTION_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y -CONFIG_HAVE_FUNCTION_GRAPH_FP_TEST=y -CONFIG_HAVE_DYNAMIC_FTRACE=y -CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y -CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y -CONFIG_HAVE_SYSCALL_TRACEPOINTS=y -CONFIG_HAVE_FENTRY=y -CONFIG_HAVE_C_RECORDMCOUNT=y -CONFIG_TRACE_CLOCK=y -CONFIG_RING_BUFFER=y -CONFIG_EVENT_TRACING=y -CONFIG_CONTEXT_SWITCH_TRACER=y -CONFIG_RING_BUFFER_ALLOW_SWAP=y -CONFIG_TRACING=y -CONFIG_GENERIC_TRACER=y -CONFIG_TRACING_SUPPORT=y -CONFIG_FTRACE=y -CONFIG_FUNCTION_TRACER=y -CONFIG_FUNCTION_GRAPH_TRACER=y -# CONFIG_IRQSOFF_TRACER is not set -# CONFIG_SCHED_TRACER is not set -# CONFIG_FTRACE_SYSCALLS is not set -# CONFIG_TRACER_SNAPSHOT is not set -CONFIG_BRANCH_PROFILE_NONE=y -# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set -# CONFIG_PROFILE_ALL_BRANCHES is not set -# CONFIG_STACK_TRACER is not set -CONFIG_BLK_DEV_IO_TRACE=y -# CONFIG_UPROBE_EVENT is not set -# CONFIG_PROBE_EVENTS is not set -CONFIG_DYNAMIC_FTRACE=y -CONFIG_DYNAMIC_FTRACE_WITH_REGS=y -# CONFIG_FUNCTION_PROFILER is not set -CONFIG_FTRACE_MCOUNT_RECORD=y -# CONFIG_FTRACE_STARTUP_TEST is not set -# CONFIG_MMIOTRACE is not set -# CONFIG_TRACEPOINT_BENCHMARK is not set -CONFIG_RING_BUFFER_BENCHMARK=m -# CONFIG_RING_BUFFER_STARTUP_TEST is not set -# CONFIG_TRACE_ENUM_MAP_FILE is not set -# CONFIG_TRACING_EVENTS_GPIO is not set - -# -# Runtime Testing -# -# CONFIG_LKDTM is not set -# CONFIG_TEST_LIST_SORT is not set -# CONFIG_BACKTRACE_SELF_TEST is not set -# CONFIG_RBTREE_TEST is not set -# CONFIG_INTERVAL_TREE_TEST is not set -# CONFIG_PERCPU_TEST is not set -CONFIG_ATOMIC64_SELFTEST=y -CONFIG_ASYNC_RAID6_TEST=m -CONFIG_TEST_HEXDUMP=m -# CONFIG_TEST_STRING_HELPERS is not set -# CONFIG_TEST_KSTRTOX is not set -# CONFIG_TEST_PRINTF is not set -# CONFIG_TEST_RHASHTABLE is not set -# CONFIG_TEST_HASH is not set -# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set -# CONFIG_DMA_API_DEBUG is not set -CONFIG_TEST_LKM=m -CONFIG_TEST_USER_COPY=m -CONFIG_TEST_BPF=m -CONFIG_TEST_FIRMWARE=m -CONFIG_TEST_UDELAY=m -CONFIG_MEMTEST=y -# CONFIG_TEST_STATIC_KEYS is not set -# CONFIG_SAMPLES is not set -CONFIG_HAVE_ARCH_KGDB=y -# CONFIG_KGDB is not set -CONFIG_STRICT_DEVMEM=y -CONFIG_X86_VERBOSE_BOOTUP=y -CONFIG_EARLY_PRINTK=y -# CONFIG_EARLY_PRINTK_DBGP is not set -CONFIG_EARLY_PRINTK_EFI=y -# CONFIG_X86_PTDUMP_CORE is not set -# CONFIG_X86_PTDUMP is not set -# CONFIG_EFI_PGT_DUMP is not set -CONFIG_DEBUG_RODATA=y -CONFIG_DEBUG_RODATA_TEST=y -# CONFIG_DEBUG_WX is not set -# CONFIG_DEBUG_SET_MODULE_RONX is not set -# CONFIG_DEBUG_NX_TEST is not set -CONFIG_DOUBLEFAULT=y -# CONFIG_DEBUG_TLBFLUSH is not set -# CONFIG_IOMMU_DEBUG is not set -# CONFIG_IOMMU_STRESS is not set -CONFIG_HAVE_MMIOTRACE_SUPPORT=y -# CONFIG_X86_DECODER_SELFTEST is not set -CONFIG_IO_DELAY_TYPE_0X80=0 -CONFIG_IO_DELAY_TYPE_0XED=1 -CONFIG_IO_DELAY_TYPE_UDELAY=2 -CONFIG_IO_DELAY_TYPE_NONE=3 -CONFIG_IO_DELAY_0X80=y -# CONFIG_IO_DELAY_0XED is not set -# CONFIG_IO_DELAY_UDELAY is not set -# CONFIG_IO_DELAY_NONE is not set -CONFIG_DEFAULT_IO_DELAY_TYPE=0 -# CONFIG_DEBUG_BOOT_PARAMS is not set -# CONFIG_CPA_DEBUG is not set -CONFIG_OPTIMIZE_INLINING=y -# CONFIG_DEBUG_ENTRY is not set -# CONFIG_DEBUG_NMI_SELFTEST is not set -CONFIG_X86_DEBUG_FPU=y -# CONFIG_PUNIT_ATOM_DEBUG is not set +CONFIG_UNICODE=y +# CONFIG_UNICODE_NORMALIZATION_SELFTEST is not set +CONFIG_IO_WQ=y +# end of File systems # # Security options # CONFIG_KEYS=y -CONFIG_KEYS_COMPAT=y +CONFIG_KEYS_REQUEST_CACHE=y # CONFIG_PERSISTENT_KEYRINGS is not set -# CONFIG_BIG_KEYS is not set -CONFIG_TRUSTED_KEYS=m -CONFIG_ENCRYPTED_KEYS=m +CONFIG_TRUSTED_KEYS=y +CONFIG_ENCRYPTED_KEYS=y +CONFIG_KEY_DH_OPERATIONS=y +CONFIG_KEY_NOTIFICATIONS=y CONFIG_SECURITY_DMESG_RESTRICT=y CONFIG_SECURITY=y -CONFIG_PAGE_TABLE_ISOLATION=y CONFIG_SECURITYFS=y CONFIG_SECURITY_NETWORK=y +CONFIG_PAGE_TABLE_ISOLATION=y +CONFIG_SECURITY_INFINIBAND=y CONFIG_SECURITY_NETWORK_XFRM=y # CONFIG_SECURITY_PATH is not set # CONFIG_INTEL_TXT is not set +CONFIG_HAVE_HARDENED_USERCOPY_ALLOCATOR=y +CONFIG_HARDENED_USERCOPY=y +CONFIG_HARDENED_USERCOPY_FALLBACK=y +# CONFIG_HARDENED_USERCOPY_PAGESPAN is not set +CONFIG_FORTIFY_SOURCE=y +# CONFIG_STATIC_USERMODEHELPER is not set # CONFIG_SECURITY_SELINUX is not set # CONFIG_SECURITY_SMACK is not set # CONFIG_SECURITY_TOMOYO is not set # CONFIG_SECURITY_APPARMOR is not set +# CONFIG_SECURITY_LOADPIN is not set # CONFIG_SECURITY_YAMA is not set +# CONFIG_SECURITY_SAFESETID is not set +# CONFIG_SECURITY_LOCKDOWN_LSM is not set +# CONFIG_SECURITY_LANDLOCK is not set # CONFIG_INTEGRITY is not set +# CONFIG_IMA_SECURE_AND_OR_TRUSTED_BOOT is not set CONFIG_DEFAULT_SECURITY_DAC=y -CONFIG_DEFAULT_SECURITY="" +CONFIG_LSM="lockdown,yama,loadpin,safesetid,integrity" + +# +# Kernel hardening options +# + +# +# Memory initialization +# +CONFIG_INIT_STACK_NONE=y +# CONFIG_GCC_PLUGIN_STRUCTLEAK_USER is not set +# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF is not set +# CONFIG_GCC_PLUGIN_STRUCTLEAK_BYREF_ALL is not set +# CONFIG_GCC_PLUGIN_STACKLEAK is not set +# CONFIG_INIT_ON_ALLOC_DEFAULT_ON is not set +# CONFIG_INIT_ON_FREE_DEFAULT_ON is not set +# end of Memory initialization +# end of Kernel hardening options +# end of Security options + CONFIG_XOR_BLOCKS=y CONFIG_ASYNC_CORE=y CONFIG_ASYNC_MEMCPY=y @@ -6981,18 +9413,18 @@ CONFIG_CRYPTO_ALGAPI=y CONFIG_CRYPTO_ALGAPI2=y CONFIG_CRYPTO_AEAD=y CONFIG_CRYPTO_AEAD2=y -CONFIG_CRYPTO_BLKCIPHER=y -CONFIG_CRYPTO_BLKCIPHER2=y +CONFIG_CRYPTO_SKCIPHER=y +CONFIG_CRYPTO_SKCIPHER2=y CONFIG_CRYPTO_HASH=y CONFIG_CRYPTO_HASH2=y CONFIG_CRYPTO_RNG=y CONFIG_CRYPTO_RNG2=y CONFIG_CRYPTO_RNG_DEFAULT=y -CONFIG_CRYPTO_PCOMP=m -CONFIG_CRYPTO_PCOMP2=y CONFIG_CRYPTO_AKCIPHER2=y -CONFIG_CRYPTO_AKCIPHER=m -CONFIG_CRYPTO_RSA=m +CONFIG_CRYPTO_AKCIPHER=y +CONFIG_CRYPTO_KPP2=y +CONFIG_CRYPTO_KPP=y +CONFIG_CRYPTO_ACOMP2=y CONFIG_CRYPTO_MANAGER=y CONFIG_CRYPTO_MANAGER2=y CONFIG_CRYPTO_USER=m @@ -7001,13 +9433,24 @@ CONFIG_CRYPTO_GF128MUL=y CONFIG_CRYPTO_NULL=y CONFIG_CRYPTO_NULL2=y CONFIG_CRYPTO_PCRYPT=m -CONFIG_CRYPTO_WORKQUEUE=y CONFIG_CRYPTO_CRYPTD=y -CONFIG_CRYPTO_MCRYPTD=m CONFIG_CRYPTO_AUTHENC=y CONFIG_CRYPTO_TEST=m -CONFIG_CRYPTO_ABLK_HELPER=y -CONFIG_CRYPTO_GLUE_HELPER_X86=y +CONFIG_CRYPTO_SIMD=y +CONFIG_CRYPTO_ENGINE=m + +# +# Public-key cryptography +# +CONFIG_CRYPTO_RSA=y +CONFIG_CRYPTO_DH=y +CONFIG_CRYPTO_ECC=m +CONFIG_CRYPTO_ECDH=m +CONFIG_CRYPTO_ECDSA=m +CONFIG_CRYPTO_ECRDSA=m +CONFIG_CRYPTO_SM2=m +CONFIG_CRYPTO_CURVE25519=m +CONFIG_CRYPTO_CURVE25519_X86=m # # Authenticated Encryption with Associated Data @@ -7015,6 +9458,8 @@ CONFIG_CRYPTO_GLUE_HELPER_X86=y CONFIG_CRYPTO_CCM=y CONFIG_CRYPTO_GCM=y CONFIG_CRYPTO_CHACHA20POLY1305=m +CONFIG_CRYPTO_AEGIS128=m +CONFIG_CRYPTO_AEGIS128_AESNI_SSE2=m CONFIG_CRYPTO_SEQIV=y CONFIG_CRYPTO_ECHAINIV=m @@ -7022,13 +9467,20 @@ CONFIG_CRYPTO_ECHAINIV=m # Block modes # CONFIG_CRYPTO_CBC=y +CONFIG_CRYPTO_CFB=m CONFIG_CRYPTO_CTR=y CONFIG_CRYPTO_CTS=y CONFIG_CRYPTO_ECB=y CONFIG_CRYPTO_LRW=y +CONFIG_CRYPTO_OFB=m CONFIG_CRYPTO_PCBC=y CONFIG_CRYPTO_XTS=y CONFIG_CRYPTO_KEYWRAP=m +CONFIG_CRYPTO_NHPOLY1305=m +CONFIG_CRYPTO_NHPOLY1305_SSE2=m +CONFIG_CRYPTO_NHPOLY1305_AVX2=m +CONFIG_CRYPTO_ADIANTUM=m +CONFIG_CRYPTO_ESSIV=y # # Hash modes @@ -7045,6 +9497,10 @@ CONFIG_CRYPTO_CRC32C=y CONFIG_CRYPTO_CRC32C_INTEL=y CONFIG_CRYPTO_CRC32=m CONFIG_CRYPTO_CRC32_PCLMUL=m +CONFIG_CRYPTO_XXHASH=m +CONFIG_CRYPTO_BLAKE2B=y +CONFIG_CRYPTO_BLAKE2S=m +CONFIG_CRYPTO_BLAKE2S_X86=m CONFIG_CRYPTO_CRCT10DIF=y CONFIG_CRYPTO_CRCT10DIF_PCLMUL=m CONFIG_CRYPTO_GHASH=y @@ -7053,18 +9509,16 @@ CONFIG_CRYPTO_POLY1305_X86_64=m CONFIG_CRYPTO_MD4=y CONFIG_CRYPTO_MD5=y CONFIG_CRYPTO_MICHAEL_MIC=y -CONFIG_CRYPTO_RMD128=m CONFIG_CRYPTO_RMD160=y -CONFIG_CRYPTO_RMD256=m -CONFIG_CRYPTO_RMD320=m CONFIG_CRYPTO_SHA1=y CONFIG_CRYPTO_SHA1_SSSE3=m CONFIG_CRYPTO_SHA256_SSSE3=m CONFIG_CRYPTO_SHA512_SSSE3=m -CONFIG_CRYPTO_SHA1_MB=m CONFIG_CRYPTO_SHA256=y CONFIG_CRYPTO_SHA512=y -CONFIG_CRYPTO_TGR192=y +CONFIG_CRYPTO_SHA3=m +CONFIG_CRYPTO_SM3=m +CONFIG_CRYPTO_STREEBOG=m CONFIG_CRYPTO_WP512=y CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m @@ -7072,7 +9526,7 @@ CONFIG_CRYPTO_GHASH_CLMUL_NI_INTEL=m # Ciphers # CONFIG_CRYPTO_AES=y -CONFIG_CRYPTO_AES_X86_64=y +CONFIG_CRYPTO_AES_TI=m CONFIG_CRYPTO_AES_NI_INTEL=y CONFIG_CRYPTO_ANUBIS=y CONFIG_CRYPTO_ARC4=y @@ -7092,8 +9546,6 @@ CONFIG_CRYPTO_DES=y CONFIG_CRYPTO_DES3_EDE_X86_64=m CONFIG_CRYPTO_FCRYPT=y CONFIG_CRYPTO_KHAZAD=y -CONFIG_CRYPTO_SALSA20=m -CONFIG_CRYPTO_SALSA20_X86_64=m CONFIG_CRYPTO_CHACHA20=m CONFIG_CRYPTO_CHACHA20_X86_64=m CONFIG_CRYPTO_SEED=y @@ -7101,6 +9553,7 @@ CONFIG_CRYPTO_SERPENT=y CONFIG_CRYPTO_SERPENT_SSE2_X86_64=y CONFIG_CRYPTO_SERPENT_AVX_X86_64=m CONFIG_CRYPTO_SERPENT_AVX2_X86_64=m +CONFIG_CRYPTO_SM4=m CONFIG_CRYPTO_TEA=y CONFIG_CRYPTO_TWOFISH=y CONFIG_CRYPTO_TWOFISH_COMMON=y @@ -7112,11 +9565,11 @@ CONFIG_CRYPTO_TWOFISH_AVX_X86_64=m # Compression # CONFIG_CRYPTO_DEFLATE=y -CONFIG_CRYPTO_ZLIB=m -CONFIG_CRYPTO_LZO=m -CONFIG_CRYPTO_842=m +CONFIG_CRYPTO_LZO=y +CONFIG_CRYPTO_842=y CONFIG_CRYPTO_LZ4=m CONFIG_CRYPTO_LZ4HC=m +CONFIG_CRYPTO_ZSTD=m # # Random Number Generation @@ -7132,68 +9585,104 @@ CONFIG_CRYPTO_USER_API=m CONFIG_CRYPTO_USER_API_HASH=m CONFIG_CRYPTO_USER_API_SKCIPHER=m CONFIG_CRYPTO_USER_API_RNG=m +# CONFIG_CRYPTO_USER_API_RNG_CAVP is not set CONFIG_CRYPTO_USER_API_AEAD=m +CONFIG_CRYPTO_USER_API_ENABLE_OBSOLETE=y +CONFIG_CRYPTO_STATS=y CONFIG_CRYPTO_HASH_INFO=y + +# +# Crypto library routines +# +CONFIG_CRYPTO_LIB_AES=y +CONFIG_CRYPTO_LIB_ARC4=y +CONFIG_CRYPTO_ARCH_HAVE_LIB_BLAKE2S=m +CONFIG_CRYPTO_LIB_BLAKE2S_GENERIC=m +CONFIG_CRYPTO_LIB_BLAKE2S=m +CONFIG_CRYPTO_ARCH_HAVE_LIB_CHACHA=m +CONFIG_CRYPTO_LIB_CHACHA_GENERIC=m +CONFIG_CRYPTO_LIB_CHACHA=m +CONFIG_CRYPTO_ARCH_HAVE_LIB_CURVE25519=m +CONFIG_CRYPTO_LIB_CURVE25519_GENERIC=m +CONFIG_CRYPTO_LIB_CURVE25519=m +CONFIG_CRYPTO_LIB_DES=y +CONFIG_CRYPTO_LIB_POLY1305_RSIZE=11 +CONFIG_CRYPTO_ARCH_HAVE_LIB_POLY1305=m +CONFIG_CRYPTO_LIB_POLY1305_GENERIC=m +CONFIG_CRYPTO_LIB_POLY1305=m +CONFIG_CRYPTO_LIB_CHACHA20POLY1305=m +CONFIG_CRYPTO_LIB_SHA256=y CONFIG_CRYPTO_HW=y CONFIG_CRYPTO_DEV_PADLOCK=m CONFIG_CRYPTO_DEV_PADLOCK_AES=m CONFIG_CRYPTO_DEV_PADLOCK_SHA=m +CONFIG_CRYPTO_DEV_ATMEL_I2C=m +CONFIG_CRYPTO_DEV_ATMEL_ECC=m +CONFIG_CRYPTO_DEV_ATMEL_SHA204A=m CONFIG_CRYPTO_DEV_CCP=y CONFIG_CRYPTO_DEV_CCP_DD=m +CONFIG_CRYPTO_DEV_SP_CCP=y CONFIG_CRYPTO_DEV_CCP_CRYPTO=m +CONFIG_CRYPTO_DEV_SP_PSP=y +# CONFIG_CRYPTO_DEV_CCP_DEBUGFS is not set CONFIG_CRYPTO_DEV_QAT=m CONFIG_CRYPTO_DEV_QAT_DH895xCC=m +CONFIG_CRYPTO_DEV_QAT_C3XXX=m +CONFIG_CRYPTO_DEV_QAT_C62X=m +CONFIG_CRYPTO_DEV_QAT_4XXX=m CONFIG_CRYPTO_DEV_QAT_DH895xCCVF=m -CONFIG_ASYMMETRIC_KEY_TYPE=m -CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=m -CONFIG_PUBLIC_KEY_ALGO_RSA=m -CONFIG_X509_CERTIFICATE_PARSER=m -CONFIG_PKCS7_MESSAGE_PARSER=m -CONFIG_PKCS7_TEST_KEY=m +CONFIG_CRYPTO_DEV_QAT_C3XXXVF=m +CONFIG_CRYPTO_DEV_QAT_C62XVF=m +CONFIG_CRYPTO_DEV_NITROX=m +CONFIG_CRYPTO_DEV_NITROX_CNN55XX=m +CONFIG_CRYPTO_DEV_CHELSIO=m +CONFIG_CRYPTO_DEV_VIRTIO=m +CONFIG_CRYPTO_DEV_SAFEXCEL=m +# CONFIG_CRYPTO_DEV_AMLOGIC_GXL is not set +CONFIG_ASYMMETRIC_KEY_TYPE=y +CONFIG_ASYMMETRIC_PUBLIC_KEY_SUBTYPE=y +CONFIG_ASYMMETRIC_TPM_KEY_SUBTYPE=m +CONFIG_X509_CERTIFICATE_PARSER=y +CONFIG_PKCS8_PRIVATE_KEY_PARSER=m +CONFIG_TPM_KEY_PARSER=m +CONFIG_PKCS7_MESSAGE_PARSER=y +# CONFIG_PKCS7_TEST_KEY is not set +CONFIG_SIGNED_PE_FILE_VERIFICATION=y # # Certificates for signature checking # CONFIG_SYSTEM_TRUSTED_KEYRING=y CONFIG_SYSTEM_TRUSTED_KEYS="" -CONFIG_HAVE_KVM=y -CONFIG_HAVE_KVM_IRQCHIP=y -CONFIG_HAVE_KVM_IRQFD=y -CONFIG_HAVE_KVM_IRQ_ROUTING=y -CONFIG_HAVE_KVM_EVENTFD=y -CONFIG_KVM_APIC_ARCHITECTURE=y -CONFIG_KVM_MMIO=y -CONFIG_KVM_ASYNC_PF=y -CONFIG_HAVE_KVM_MSI=y -CONFIG_HAVE_KVM_CPU_RELAX_INTERCEPT=y -CONFIG_KVM_VFIO=y -CONFIG_KVM_GENERIC_DIRTYLOG_READ_PROTECT=y -CONFIG_KVM_COMPAT=y -CONFIG_HAVE_KVM_IRQ_BYPASS=y -CONFIG_VIRTUALIZATION=y -CONFIG_KVM=m -CONFIG_KVM_INTEL=m -CONFIG_KVM_AMD=m -CONFIG_KVM_MMU_AUDIT=y -CONFIG_KVM_DEVICE_ASSIGNMENT=y +# CONFIG_SYSTEM_EXTRA_CERTIFICATE is not set +CONFIG_SECONDARY_TRUSTED_KEYRING=y +CONFIG_SYSTEM_BLACKLIST_KEYRING=y +CONFIG_SYSTEM_BLACKLIST_HASH_LIST="" +# CONFIG_SYSTEM_REVOCATION_LIST is not set +# end of Certificates for signature checking + CONFIG_BINARY_PRINTF=y # # Library routines # CONFIG_RAID6_PQ=y +# CONFIG_RAID6_PQ_BENCHMARK is not set +CONFIG_LINEAR_RANGES=y +CONFIG_PACKING=y CONFIG_BITREVERSE=y -# CONFIG_HAVE_ARCH_BITREVERSE is not set -CONFIG_RATIONAL=y CONFIG_GENERIC_STRNCPY_FROM_USER=y CONFIG_GENERIC_STRNLEN_USER=y CONFIG_GENERIC_NET_UTILS=y CONFIG_GENERIC_FIND_FIRST_BIT=y +CONFIG_CORDIC=m +# CONFIG_PRIME_NUMBERS is not set +CONFIG_RATIONAL=y CONFIG_GENERIC_PCI_IOMAP=y CONFIG_GENERIC_IOMAP=y -CONFIG_GENERIC_IO=y CONFIG_ARCH_USE_CMPXCHG_LOCKREF=y CONFIG_ARCH_HAS_FAST_MULTIPLIER=y +CONFIG_ARCH_USE_SYM_ANNOTATIONS=y CONFIG_CRC_CCITT=m CONFIG_CRC16=y CONFIG_CRC_T10DIF=y @@ -7204,13 +9693,15 @@ CONFIG_CRC32_SLICEBY8=y # CONFIG_CRC32_SLICEBY4 is not set # CONFIG_CRC32_SARWATE is not set # CONFIG_CRC32_BIT is not set +CONFIG_CRC64=m +CONFIG_CRC4=m CONFIG_CRC7=m CONFIG_LIBCRC32C=y CONFIG_CRC8=m -# CONFIG_AUDIT_ARCH_COMPAT_GENERIC is not set +CONFIG_XXHASH=y # CONFIG_RANDOM32_SELFTEST is not set -CONFIG_842_COMPRESS=m -CONFIG_842_DECOMPRESS=m +CONFIG_842_COMPRESS=y +CONFIG_842_DECOMPRESS=y CONFIG_ZLIB_INFLATE=y CONFIG_ZLIB_DEFLATE=y CONFIG_LZO_COMPRESS=y @@ -7218,6 +9709,8 @@ CONFIG_LZO_DECOMPRESS=y CONFIG_LZ4_COMPRESS=m CONFIG_LZ4HC_COMPRESS=m CONFIG_LZ4_DECOMPRESS=y +CONFIG_ZSTD_COMPRESS=m +CONFIG_ZSTD_DECOMPRESS=y CONFIG_XZ_DEC=y CONFIG_XZ_DEC_X86=y CONFIG_XZ_DEC_POWERPC=y @@ -7233,6 +9726,7 @@ CONFIG_DECOMPRESS_LZMA=y CONFIG_DECOMPRESS_XZ=y CONFIG_DECOMPRESS_LZO=y CONFIG_DECOMPRESS_LZ4=y +CONFIG_DECOMPRESS_ZSTD=y CONFIG_GENERIC_ALLOCATOR=y CONFIG_REED_SOLOMON=m CONFIG_REED_SOLOMON_ENC8=y @@ -7246,24 +9740,50 @@ CONFIG_TEXTSEARCH_BM=m CONFIG_TEXTSEARCH_FSM=m CONFIG_BTREE=y CONFIG_INTERVAL_TREE=y +CONFIG_XARRAY_MULTI=y CONFIG_ASSOCIATIVE_ARRAY=y CONFIG_HAS_IOMEM=y CONFIG_HAS_IOPORT_MAP=y CONFIG_HAS_DMA=y +CONFIG_DMA_OPS=y +CONFIG_NEED_SG_DMA_LENGTH=y +CONFIG_NEED_DMA_MAP_STATE=y +CONFIG_ARCH_DMA_ADDR_T_64BIT=y +CONFIG_ARCH_HAS_FORCE_DMA_UNENCRYPTED=y +CONFIG_SWIOTLB=y +CONFIG_DMA_COHERENT_POOL=y +CONFIG_DMA_CMA=y +# CONFIG_DMA_PERNUMA_CMA is not set + +# +# Default contiguous memory area size: +# +CONFIG_CMA_SIZE_MBYTES=0 +CONFIG_CMA_SIZE_SEL_MBYTES=y +# CONFIG_CMA_SIZE_SEL_PERCENTAGE is not set +# CONFIG_CMA_SIZE_SEL_MIN is not set +# CONFIG_CMA_SIZE_SEL_MAX is not set +CONFIG_CMA_ALIGNMENT=8 +# CONFIG_DMA_API_DEBUG is not set +# CONFIG_DMA_MAP_BENCHMARK is not set +CONFIG_SGL_ALLOC=y +CONFIG_IOMMU_HELPER=y CONFIG_CHECK_SIGNATURE=y CONFIG_CPU_RMAP=y CONFIG_DQL=y CONFIG_GLOB=y # CONFIG_GLOB_SELFTEST is not set CONFIG_NLATTR=y -CONFIG_ARCH_HAS_ATOMIC64_DEC_IF_POSITIVE=y CONFIG_LRU_CACHE=m CONFIG_CLZ_TAB=y -CONFIG_CORDIC=m -# CONFIG_DDR is not set -CONFIG_MPILIB=m +CONFIG_IRQ_POLL=y +CONFIG_MPILIB=y +CONFIG_DIMLIB=y CONFIG_OID_REGISTRY=y CONFIG_UCS2_STRING=y +CONFIG_HAVE_GENERIC_VDSO=y +CONFIG_GENERIC_GETTIMEOFDAY=y +CONFIG_GENERIC_VDSO_TIME_NS=y CONFIG_FONT_SUPPORT=y CONFIG_FONTS=y CONFIG_FONT_8x8=y @@ -7274,10 +9794,347 @@ CONFIG_FONT_8x16=y # CONFIG_FONT_ACORN_8x8 is not set # CONFIG_FONT_MINI_4x6 is not set # CONFIG_FONT_6x10 is not set +# CONFIG_FONT_10x18 is not set CONFIG_FONT_SUN8x16=y # CONFIG_FONT_SUN12x22 is not set -# CONFIG_FONT_10x18 is not set -# CONFIG_SG_SPLIT is not set -CONFIG_ARCH_HAS_SG_CHAIN=y +CONFIG_FONT_TER16x32=y +# CONFIG_FONT_6x8 is not set +CONFIG_SG_POOL=y CONFIG_ARCH_HAS_PMEM_API=y -CONFIG_ARCH_HAS_MMIO_FLUSH=y +CONFIG_MEMREGION=y +CONFIG_ARCH_HAS_UACCESS_FLUSHCACHE=y +CONFIG_ARCH_HAS_COPY_MC=y +CONFIG_ARCH_STACKWALK=y +CONFIG_SBITMAP=y +CONFIG_PARMAN=m +CONFIG_OBJAGG=m +# CONFIG_STRING_SELFTEST is not set +# end of Library routines + +CONFIG_PLDMFW=y +CONFIG_ASN1_ENCODER=y + +# +# Kernel hacking +# + +# +# printk and dmesg options +# +CONFIG_PRINTK_TIME=y +# CONFIG_PRINTK_CALLER is not set +CONFIG_CONSOLE_LOGLEVEL_DEFAULT=7 +CONFIG_CONSOLE_LOGLEVEL_QUIET=4 +CONFIG_MESSAGE_LOGLEVEL_DEFAULT=4 +# CONFIG_BOOT_PRINTK_DELAY is not set +# CONFIG_DYNAMIC_DEBUG is not set +# CONFIG_DYNAMIC_DEBUG_CORE is not set +CONFIG_SYMBOLIC_ERRNAME=y +CONFIG_DEBUG_BUGVERBOSE=y +# end of printk and dmesg options + +# +# Compile-time checks and compiler options +# +# CONFIG_DEBUG_INFO is not set +CONFIG_FRAME_WARN=0 +CONFIG_STRIP_ASM_SYMS=y +# CONFIG_READABLE_ASM is not set +# CONFIG_HEADERS_INSTALL is not set +# CONFIG_DEBUG_SECTION_MISMATCH is not set +CONFIG_SECTION_MISMATCH_WARN_ONLY=y +# CONFIG_DEBUG_FORCE_FUNCTION_ALIGN_32B is not set +CONFIG_STACK_VALIDATION=y +# CONFIG_VMLINUX_MAP is not set +# CONFIG_DEBUG_FORCE_WEAK_PER_CPU is not set +# end of Compile-time checks and compiler options + +# +# Generic Kernel Debugging Instruments +# +CONFIG_MAGIC_SYSRQ=y +CONFIG_MAGIC_SYSRQ_DEFAULT_ENABLE=0x1 +CONFIG_MAGIC_SYSRQ_SERIAL=y +CONFIG_MAGIC_SYSRQ_SERIAL_SEQUENCE="" +CONFIG_DEBUG_FS=y +CONFIG_DEBUG_FS_ALLOW_ALL=y +# CONFIG_DEBUG_FS_DISALLOW_MOUNT is not set +# CONFIG_DEBUG_FS_ALLOW_NONE is not set +CONFIG_HAVE_ARCH_KGDB=y +# CONFIG_KGDB is not set +CONFIG_ARCH_HAS_UBSAN_SANITIZE_ALL=y +# CONFIG_UBSAN is not set +CONFIG_HAVE_ARCH_KCSAN=y +# end of Generic Kernel Debugging Instruments + +CONFIG_DEBUG_KERNEL=y +# CONFIG_DEBUG_MISC is not set + +# +# Memory Debugging +# +# CONFIG_PAGE_EXTENSION is not set +# CONFIG_DEBUG_PAGEALLOC is not set +# CONFIG_PAGE_OWNER is not set +# CONFIG_PAGE_POISONING is not set +# CONFIG_DEBUG_PAGE_REF is not set +CONFIG_DEBUG_RODATA_TEST=y +CONFIG_ARCH_HAS_DEBUG_WX=y +# CONFIG_DEBUG_WX is not set +CONFIG_GENERIC_PTDUMP=y +# CONFIG_PTDUMP_DEBUGFS is not set +# CONFIG_DEBUG_OBJECTS is not set +# CONFIG_SLUB_DEBUG_ON is not set +# CONFIG_SLUB_STATS is not set +CONFIG_HAVE_DEBUG_KMEMLEAK=y +# CONFIG_DEBUG_KMEMLEAK is not set +# CONFIG_DEBUG_STACK_USAGE is not set +# CONFIG_SCHED_STACK_END_CHECK is not set +CONFIG_ARCH_HAS_DEBUG_VM_PGTABLE=y +# CONFIG_DEBUG_VM is not set +# CONFIG_DEBUG_VM_PGTABLE is not set +CONFIG_ARCH_HAS_DEBUG_VIRTUAL=y +# CONFIG_DEBUG_VIRTUAL is not set +CONFIG_DEBUG_MEMORY_INIT=y +# CONFIG_DEBUG_PER_CPU_MAPS is not set +CONFIG_ARCH_SUPPORTS_KMAP_LOCAL_FORCE_MAP=y +# CONFIG_DEBUG_KMAP_LOCAL_FORCE_MAP is not set +CONFIG_HAVE_ARCH_KASAN=y +CONFIG_HAVE_ARCH_KASAN_VMALLOC=y +CONFIG_CC_HAS_KASAN_GENERIC=y +CONFIG_CC_HAS_WORKING_NOSANITIZE_ADDRESS=y +# CONFIG_KASAN is not set +CONFIG_HAVE_ARCH_KFENCE=y +# CONFIG_KFENCE is not set +# end of Memory Debugging + +# CONFIG_DEBUG_SHIRQ is not set + +# +# Debug Oops, Lockups and Hangs +# +# CONFIG_PANIC_ON_OOPS is not set +CONFIG_PANIC_ON_OOPS_VALUE=0 +CONFIG_PANIC_TIMEOUT=0 +# CONFIG_SOFTLOCKUP_DETECTOR is not set +CONFIG_HARDLOCKUP_CHECK_TIMESTAMP=y +# CONFIG_HARDLOCKUP_DETECTOR is not set +# CONFIG_DETECT_HUNG_TASK is not set +# CONFIG_WQ_WATCHDOG is not set +# CONFIG_TEST_LOCKUP is not set +# end of Debug Oops, Lockups and Hangs + +# +# Scheduler Debugging +# +CONFIG_SCHED_DEBUG=y +CONFIG_SCHED_INFO=y +# CONFIG_SCHEDSTATS is not set +# end of Scheduler Debugging + +# CONFIG_DEBUG_TIMEKEEPING is not set + +# +# Lock Debugging (spinlocks, mutexes, etc...) +# +CONFIG_LOCK_DEBUGGING_SUPPORT=y +# CONFIG_PROVE_LOCKING is not set +# CONFIG_LOCK_STAT is not set +# CONFIG_DEBUG_RT_MUTEXES is not set +# CONFIG_DEBUG_SPINLOCK is not set +# CONFIG_DEBUG_MUTEXES is not set +# CONFIG_DEBUG_WW_MUTEX_SLOWPATH is not set +# CONFIG_DEBUG_RWSEMS is not set +# CONFIG_DEBUG_LOCK_ALLOC is not set +# CONFIG_DEBUG_ATOMIC_SLEEP is not set +# CONFIG_DEBUG_LOCKING_API_SELFTESTS is not set +# CONFIG_LOCK_TORTURE_TEST is not set +# CONFIG_WW_MUTEX_SELFTEST is not set +# CONFIG_SCF_TORTURE_TEST is not set +# CONFIG_CSD_LOCK_WAIT_DEBUG is not set +# end of Lock Debugging (spinlocks, mutexes, etc...) + +# CONFIG_DEBUG_IRQFLAGS is not set +CONFIG_STACKTRACE=y +# CONFIG_WARN_ALL_UNSEEDED_RANDOM is not set +# CONFIG_DEBUG_KOBJECT is not set + +# +# Debug kernel data structures +# +# CONFIG_DEBUG_LIST is not set +# CONFIG_DEBUG_PLIST is not set +# CONFIG_DEBUG_SG is not set +# CONFIG_DEBUG_NOTIFIERS is not set +# CONFIG_BUG_ON_DATA_CORRUPTION is not set +# end of Debug kernel data structures + +# CONFIG_DEBUG_CREDENTIALS is not set + +# +# RCU Debugging +# +# CONFIG_RCU_SCALE_TEST is not set +# CONFIG_RCU_TORTURE_TEST is not set +# CONFIG_RCU_REF_SCALE_TEST is not set +CONFIG_RCU_CPU_STALL_TIMEOUT=60 +# CONFIG_RCU_TRACE is not set +# CONFIG_RCU_EQS_DEBUG is not set +# CONFIG_RCU_STRICT_GRACE_PERIOD is not set +# end of RCU Debugging + +# CONFIG_DEBUG_WQ_FORCE_RR_CPU is not set +# CONFIG_DEBUG_BLOCK_EXT_DEVT is not set +# CONFIG_CPU_HOTPLUG_STATE_CONTROL is not set +# CONFIG_LATENCYTOP is not set +CONFIG_USER_STACKTRACE_SUPPORT=y +CONFIG_NOP_TRACER=y +CONFIG_HAVE_FUNCTION_TRACER=y +CONFIG_HAVE_FUNCTION_GRAPH_TRACER=y +CONFIG_HAVE_DYNAMIC_FTRACE=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y +CONFIG_HAVE_DYNAMIC_FTRACE_WITH_ARGS=y +CONFIG_HAVE_FTRACE_MCOUNT_RECORD=y +CONFIG_HAVE_SYSCALL_TRACEPOINTS=y +CONFIG_HAVE_FENTRY=y +CONFIG_HAVE_OBJTOOL_MCOUNT=y +CONFIG_HAVE_C_RECORDMCOUNT=y +CONFIG_TRACE_CLOCK=y +CONFIG_RING_BUFFER=y +CONFIG_EVENT_TRACING=y +CONFIG_CONTEXT_SWITCH_TRACER=y +CONFIG_TRACING=y +CONFIG_GENERIC_TRACER=y +CONFIG_TRACING_SUPPORT=y +CONFIG_FTRACE=y +CONFIG_BOOTTIME_TRACING=y +CONFIG_FUNCTION_TRACER=y +CONFIG_FUNCTION_GRAPH_TRACER=y +CONFIG_DYNAMIC_FTRACE=y +CONFIG_DYNAMIC_FTRACE_WITH_REGS=y +CONFIG_DYNAMIC_FTRACE_WITH_DIRECT_CALLS=y +# CONFIG_FUNCTION_PROFILER is not set +# CONFIG_STACK_TRACER is not set +# CONFIG_IRQSOFF_TRACER is not set +# CONFIG_SCHED_TRACER is not set +# CONFIG_HWLAT_TRACER is not set +# CONFIG_MMIOTRACE is not set +# CONFIG_FTRACE_SYSCALLS is not set +# CONFIG_TRACER_SNAPSHOT is not set +CONFIG_BRANCH_PROFILE_NONE=y +# CONFIG_PROFILE_ANNOTATED_BRANCHES is not set +# CONFIG_BLK_DEV_IO_TRACE is not set +CONFIG_UPROBE_EVENTS=y +CONFIG_BPF_EVENTS=y +CONFIG_DYNAMIC_EVENTS=y +CONFIG_PROBE_EVENTS=y +CONFIG_FTRACE_MCOUNT_RECORD=y +CONFIG_FTRACE_MCOUNT_USE_CC=y +CONFIG_SYNTH_EVENTS=y +# CONFIG_HIST_TRIGGERS is not set +# CONFIG_TRACE_EVENT_INJECT is not set +# CONFIG_TRACEPOINT_BENCHMARK is not set +CONFIG_RING_BUFFER_BENCHMARK=m +CONFIG_TRACE_EVAL_MAP_FILE=y +# CONFIG_FTRACE_RECORD_RECURSION is not set +# CONFIG_FTRACE_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_STARTUP_TEST is not set +# CONFIG_RING_BUFFER_VALIDATE_TIME_DELTAS is not set +# CONFIG_PREEMPTIRQ_DELAY_TEST is not set +# CONFIG_SYNTH_EVENT_GEN_TEST is not set +# CONFIG_PROVIDE_OHCI1394_DMA_INIT is not set +# CONFIG_SAMPLES is not set +CONFIG_ARCH_HAS_DEVMEM_IS_ALLOWED=y +CONFIG_STRICT_DEVMEM=y +# CONFIG_IO_STRICT_DEVMEM is not set + +# +# x86 Debugging +# +CONFIG_TRACE_IRQFLAGS_SUPPORT=y +CONFIG_TRACE_IRQFLAGS_NMI_SUPPORT=y +CONFIG_EARLY_PRINTK_USB=y +CONFIG_X86_VERBOSE_BOOTUP=y +CONFIG_EARLY_PRINTK=y +# CONFIG_EARLY_PRINTK_DBGP is not set +CONFIG_EARLY_PRINTK_USB_XDBC=y +# CONFIG_EFI_PGT_DUMP is not set +# CONFIG_DEBUG_TLBFLUSH is not set +# CONFIG_IOMMU_DEBUG is not set +CONFIG_HAVE_MMIOTRACE_SUPPORT=y +# CONFIG_X86_DECODER_SELFTEST is not set +CONFIG_IO_DELAY_0X80=y +# CONFIG_IO_DELAY_0XED is not set +# CONFIG_IO_DELAY_UDELAY is not set +# CONFIG_IO_DELAY_NONE is not set +# CONFIG_DEBUG_BOOT_PARAMS is not set +# CONFIG_CPA_DEBUG is not set +# CONFIG_DEBUG_ENTRY is not set +# CONFIG_DEBUG_NMI_SELFTEST is not set +CONFIG_X86_DEBUG_FPU=y +# CONFIG_PUNIT_ATOM_DEBUG is not set +CONFIG_UNWINDER_ORC=y +# CONFIG_UNWINDER_FRAME_POINTER is not set +# CONFIG_UNWINDER_GUESS is not set +# end of x86 Debugging + +# +# Kernel Testing and Coverage +# +# CONFIG_KUNIT is not set +# CONFIG_NOTIFIER_ERROR_INJECTION is not set +# CONFIG_FAULT_INJECTION is not set +CONFIG_ARCH_HAS_KCOV=y +CONFIG_CC_HAS_SANCOV_TRACE_PC=y +# CONFIG_KCOV is not set +CONFIG_RUNTIME_TESTING_MENU=y +# CONFIG_LKDTM is not set +# CONFIG_TEST_LIST_SORT is not set +# CONFIG_TEST_MIN_HEAP is not set +# CONFIG_TEST_SORT is not set +# CONFIG_TEST_DIV64 is not set +# CONFIG_BACKTRACE_SELF_TEST is not set +# CONFIG_RBTREE_TEST is not set +# CONFIG_REED_SOLOMON_TEST is not set +# CONFIG_INTERVAL_TREE_TEST is not set +# CONFIG_PERCPU_TEST is not set +CONFIG_ATOMIC64_SELFTEST=y +CONFIG_ASYNC_RAID6_TEST=m +CONFIG_TEST_HEXDUMP=m +# CONFIG_TEST_STRING_HELPERS is not set +# CONFIG_TEST_STRSCPY is not set +# CONFIG_TEST_KSTRTOX is not set +# CONFIG_TEST_PRINTF is not set +# CONFIG_TEST_BITMAP is not set +# CONFIG_TEST_UUID is not set +# CONFIG_TEST_XARRAY is not set +# CONFIG_TEST_OVERFLOW is not set +# CONFIG_TEST_RHASHTABLE is not set +# CONFIG_TEST_HASH is not set +# CONFIG_TEST_IDA is not set +# CONFIG_TEST_PARMAN is not set +CONFIG_TEST_LKM=m +# CONFIG_TEST_BITOPS is not set +# CONFIG_TEST_VMALLOC is not set +CONFIG_TEST_USER_COPY=m +CONFIG_TEST_BPF=m +# CONFIG_TEST_BLACKHOLE_DEV is not set +# CONFIG_FIND_BIT_BENCHMARK is not set +CONFIG_TEST_FIRMWARE=m +# CONFIG_TEST_SYSCTL is not set +CONFIG_TEST_UDELAY=m +# CONFIG_TEST_STATIC_KEYS is not set +# CONFIG_TEST_KMOD is not set +# CONFIG_TEST_MEMCAT_P is not set +# CONFIG_TEST_OBJAGG is not set +# CONFIG_TEST_STACKINIT is not set +# CONFIG_TEST_MEMINIT is not set +# CONFIG_TEST_HMM is not set +# CONFIG_TEST_FREE_PAGES is not set +# CONFIG_TEST_FPU is not set +CONFIG_ARCH_USE_MEMTEST=y +CONFIG_MEMTEST=y +# CONFIG_HYPERV_TESTING is not set +# end of Kernel Testing and Coverage +# end of Kernel hacking diff --git a/system/xen/dom0/kernel-xen.sh b/system/xen/dom0/kernel-xen.sh index ce4c95e783ad1..e36770798bf61 100644 --- a/system/xen/dom0/kernel-xen.sh +++ b/system/xen/dom0/kernel-xen.sh @@ -5,9 +5,8 @@ # Written by Chris Abela <chris.abela@maltats.com>, 20100515 # Modified by Mario Preksavec <mario@slackware.hr> -KERNEL=${KERNEL:-4.4.240} -XEN=${XEN:-4.13.1} -BOOTLOADER=${BOOTLOADER:-lilo} +KERNEL=${KERNEL:-5.13.8} +XEN=${XEN:-4.15.0} ROOTMOD=${ROOTMOD:-ext4} ROOTFS=${ROOTFS:-ext4} @@ -15,18 +14,11 @@ ROOTDEV=${ROOTDEV:-/dev/sda2} if [ -z "$ARCH" ]; then case "$( uname -m )" in - i?86) ARCH=i686 ;; x86_64) ARCH=x86_64 ;; *) echo "Unsupported architecture detected ($ARCH)"; exit ;; esac fi -if [ "$BOOTLOADER" = lilo ] && [ ! -x /usr/bin/mbootpack ]; then - echo "LILO bootloader requires mbootpack." - echo "Get it from slackbuilds.org and rerun this script." - exit -fi - if [ ! -d /usr/src/linux-$KERNEL ]; then echo "Missing kernel source in /usr/src/linux-$KERNEL" echo "Get it from kernel.org and rerun this script." @@ -78,15 +70,7 @@ cp -a $TMP/lib/modules/$KERNEL-xen /lib/modules mkinitrd -c -k $KERNEL-xen -m $ROOTMOD -f $ROOTFS -r $ROOTDEV \ -o /boot/initrd-$KERNEL-xen.gz -# For lilo we use mbootpack -if [ "$BOOTLOADER" = lilo ]; then - gzip -d -c /boot/xen-$XEN.gz > xen-$XEN - mbootpack -m arch/x86/boot/bzImage -m /boot/initrd-$KERNEL-xen.gz xen-$XEN \ - -o /boot/vmlinuz-$KERNEL-xen -else - cp arch/x86/boot/bzImage /boot/vmlinuz-$KERNEL-xen -fi - +cp arch/x86/boot/bzImage /boot/vmlinuz-$KERNEL-xen cp System.map /boot/System.map-$KERNEL-xen cp .config /boot/config-$KERNEL-xen diff --git a/system/xen/domU/domU.sh b/system/xen/domU/domU.sh index e49e3d58b9fd0..f1878f30ebbe3 100644 --- a/system/xen/domU/domU.sh +++ b/system/xen/domU/domU.sh @@ -7,7 +7,7 @@ set -e -KERNEL=${KERNEL:-4.4.240} +KERNEL=${KERNEL:-5.13.8} # Build an image for the root file system and another for the swap # Default values : 8GB and 500MB resepectively. diff --git a/system/xen/domU/mydom b/system/xen/domU/mydom index 72f7f511ef367..c43c00ff29527 100644 --- a/system/xen/domU/mydom +++ b/system/xen/domU/mydom @@ -2,9 +2,9 @@ kernel = "/boot/vmlinuz-xen" ramdisk = "/boot/initrd-xen.gz" memory = 128 name = "Slackware" -vif = [ 'mac=00:16:3e:00:00:01'] -disk = [ 'file:/full_path_to/slackware.img,xvda1,w', - 'file:/full_path_to/swap_file,xvda2,w' ] +vif = [ "mac=00:16:3e:00:00:01" ] +disk = [ "file:/full_path_to/slackware.img,xvda1,w", + "file:/full_path_to/swap_file,xvda2,w" ] root = "/dev/xvda1 ro" extra = "3" extra = "console=hvc0 elevator=noop" diff --git a/system/xen/patches/0001-BaseTools-fix-ucs-2-lookup-on-python-3.9.patch b/system/xen/patches/0001-BaseTools-fix-ucs-2-lookup-on-python-3.9.patch new file mode 100644 index 0000000000000..f40f815cc4038 --- /dev/null +++ b/system/xen/patches/0001-BaseTools-fix-ucs-2-lookup-on-python-3.9.patch @@ -0,0 +1,49 @@ +From a32df3463befa04913fd1934ed264038a9eae00f Mon Sep 17 00:00:00 2001 +Message-Id: <a32df3463befa04913fd1934ed264038a9eae00f.1596577611.git.crobinso@redhat.com> +From: Cole Robinson <crobinso@redhat.com> +Date: Tue, 4 Aug 2020 17:04:50 -0400 +Subject: [PATCH 1/2] BaseTools: fix ucs-2 lookup on python 3.9 + +python3.9 changed/fixed codec.register behavior to always replace +hyphen with underscore for passed in codec names: + + https://bugs.python.org/issue37751 + +So the custom Ucs2Search needs to be adapted to handle 'ucs_2' in +addition to existing 'ucs-2' for back compat. + +This fixes test failures on python3.9, example: + +====================================================================== +FAIL: testUtf16InUniFile (CheckUnicodeSourceFiles.Tests) +---------------------------------------------------------------------- +Traceback (most recent call last): + File "/builddir/build/BUILD/edk2-edk2-stable202002/BaseTools/Source/Python/AutoGen/UniClassObject.py", line 375, in PreProcess + FileIn = UniFileClassObject.OpenUniFile(LongFilePath(File.Path)) + File "/builddir/build/BUILD/edk2-edk2-stable202002/BaseTools/Source/Python/AutoGen/UniClassObject.py", line 303, in OpenUniFile + UniFileClassObject.VerifyUcs2Data(FileIn, FileName, Encoding) + File "/builddir/build/BUILD/edk2-edk2-stable202002/BaseTools/Source/Python/AutoGen/UniClassObject.py", line 312, in VerifyUcs2Data + Ucs2Info = codecs.lookup('ucs-2') +LookupError: unknown encoding: ucs-2 + +Signed-off-by: Cole Robinson <crobinso@redhat.com> +--- + BaseTools/Source/Python/AutoGen/UniClassObject.py | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/BaseTools/Source/Python/AutoGen/UniClassObject.py b/BaseTools/Source/Python/AutoGen/UniClassObject.py +index b2895f7e5c..883c2356e0 100644 +--- a/BaseTools/Source/Python/AutoGen/UniClassObject.py ++++ b/BaseTools/Source/Python/AutoGen/UniClassObject.py +@@ -152,7 +152,7 @@ class Ucs2Codec(codecs.Codec): +
+ TheUcs2Codec = Ucs2Codec()
+ def Ucs2Search(name):
+- if name == 'ucs-2':
++ if name in ['ucs-2', 'ucs_2']:
+ return codecs.CodecInfo(
+ name=name,
+ encode=TheUcs2Codec.encode,
+-- +2.26.2 + diff --git a/system/xen/patches/0002-BaseTools-Work-around-array.array.tostring-removal-i.patch b/system/xen/patches/0002-BaseTools-Work-around-array.array.tostring-removal-i.patch new file mode 100644 index 0000000000000..3f569eaf11e2c --- /dev/null +++ b/system/xen/patches/0002-BaseTools-Work-around-array.array.tostring-removal-i.patch @@ -0,0 +1,51 @@ +From f6e649b25150c1417ebcd595004da6d788d7c9c5 Mon Sep 17 00:00:00 2001 +Message-Id: <f6e649b25150c1417ebcd595004da6d788d7c9c5.1596577611.git.crobinso@redhat.com> +In-Reply-To: <a32df3463befa04913fd1934ed264038a9eae00f.1596577611.git.crobinso@redhat.com> +References: <a32df3463befa04913fd1934ed264038a9eae00f.1596577611.git.crobinso@redhat.com> +From: Cole Robinson <crobinso@redhat.com> +Date: Tue, 4 Aug 2020 17:24:32 -0400 +Subject: [PATCH 2/2] BaseTools: Work around array.array.tostring() removal in + python 3.9 + +In python3, array.array.tostring() was a compat alias for tobytes(). +tostring() was removed in python 3.9. + +Convert this to use tolist() which should be valid for all python +versions. + +This fixes this build error on python3.9: + +(Python 3.9.0b5 on linux) Traceback (most recent call last): + File "/root/edk2/edk2-edk2-stable202002/BaseTools/BinWrappers/PosixLike/../../Source/Python/Trim/Trim.py", line 593, in Main + GenerateVfrBinSec(CommandOptions.ModuleName, CommandOptions.DebugDir, CommandOptions.OutputFile) + File "/root/edk2/edk2-edk2-stable202002/BaseTools/BinWrappers/PosixLike/../../Source/Python/Trim/Trim.py", line 449, in GenerateVfrBinSec + VfrUniOffsetList = GetVariableOffset(MapFileName, EfiFileName, VfrNameList) + File "/root/edk2/edk2-edk2-stable202002/BaseTools/Source/Python/Common/Misc.py", line 88, in GetVariableOffset + return _parseForGCC(lines, efifilepath, varnames) + File "/root/edk2/edk2-edk2-stable202002/BaseTools/Source/Python/Common/Misc.py", line 151, in _parseForGCC + efisecs = PeImageClass(efifilepath).SectionHeaderList + File "/root/edk2/edk2-edk2-stable202002/BaseTools/Source/Python/Common/Misc.py", line 1638, in __init__ + if ByteArray.tostring() != b'PE\0\0': +AttributeError: 'array.array' object has no attribute 'tostring' + +Signed-off-by: Cole Robinson <crobinso@redhat.com> +--- + BaseTools/Source/Python/Common/Misc.py | 2 +- + 1 file changed, 1 insertion(+), 1 deletion(-) + +diff --git a/BaseTools/Source/Python/Common/Misc.py b/BaseTools/Source/Python/Common/Misc.py +index da5fb380f0..751b2c24f0 100755 +--- a/BaseTools/Source/Python/Common/Misc.py ++++ b/BaseTools/Source/Python/Common/Misc.py +@@ -1635,7 +1635,7 @@ class PeImageClass(): + ByteArray = array.array('B')
+ ByteArray.fromfile(PeObject, 4)
+ # PE signature should be 'PE\0\0'
+- if ByteArray.tostring() != b'PE\0\0':
++ if ByteArray.tolist() != [ord('P'), ord('E'), 0, 0]:
+ self.ErrorInfo = self.FileName + ' has no valid PE signature PE00'
+ return
+
+-- +2.26.2 + diff --git a/system/xen/patches/0003-BaseTools-replace-deprecated-fromstring-and-tostring.diff b/system/xen/patches/0003-BaseTools-replace-deprecated-fromstring-and-tostring.diff new file mode 100644 index 0000000000000..4c9f2b6674bbe --- /dev/null +++ b/system/xen/patches/0003-BaseTools-replace-deprecated-fromstring-and-tostring.diff @@ -0,0 +1,60 @@ +--- xen-ovmf-20190606_20d2e5a125/BaseTools/Source/Python/Eot/EotMain.py.orig 2019-06-06 06:51:42.000000000 +0200 ++++ xen-ovmf-20190606_20d2e5a125/BaseTools/Source/Python/Eot/EotMain.py 2020-12-25 20:10:44.332843625 +0100 +@@ -152,11 +152,11 @@ + try:
+ TmpData = DeCompress('Efi', self[self._HEADER_SIZE_:])
+ DecData = array('B')
+- DecData.fromstring(TmpData)
++ list(map(lambda str: DecData.fromlist([ord(str), 0]), TmpData))
+ except:
+ TmpData = DeCompress('Framework', self[self._HEADER_SIZE_:])
+ DecData = array('B')
+- DecData.fromstring(TmpData)
++ list(map(lambda str: DecData.fromlist([ord(str), 0]), TmpData))
+
+ SectionList = []
+ Offset = 0
+@@ -196,7 +196,7 @@ + return len(self)
+
+ def _GetUiString(self):
+- return codecs.utf_16_decode(self[0:-2].tostring())[0]
++ return codecs.utf_16_decode(self[0:-2].tobytes())[0]
+
+ String = property(_GetUiString)
+
+@@ -738,7 +738,7 @@ + Offset = self.DataOffset - 4
+ TmpData = DeCompress('Framework', self[self.Offset:])
+ DecData = array('B')
+- DecData.fromstring(TmpData)
++ list(map(lambda str: DecData.fromlist([ord(str), 0]), TmpData))
+ Offset = 0
+ while Offset < len(DecData):
+ Sec = Section()
+@@ -759,7 +759,7 @@ +
+ TmpData = DeCompress('Lzma', self[self.Offset:])
+ DecData = array('B')
+- DecData.fromstring(TmpData)
++ list(map(lambda str: DecData.fromlist([ord(str), 0]), TmpData))
+ Offset = 0
+ while Offset < len(DecData):
+ Sec = Section()
+--- xen-ovmf-20190606_20d2e5a125/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py.orig 2019-06-06 06:51:42.000000000 +0200 ++++ xen-ovmf-20190606_20d2e5a125/BaseTools/Source/Python/GenFds/GenFdsGlobalVariable.py 2020-12-25 20:10:39.188843812 +0100 +@@ -469,12 +469,12 @@ + GenFdsGlobalVariable.SecCmdList.append(' '.join(Cmd).strip())
+ else:
+ SectionData = array('B', [0, 0, 0, 0])
+- SectionData.fromstring(Ui.encode("utf_16_le"))
++ list(map(lambda str: SectionData.fromlist([ord(str), 0]), Ui))
+ SectionData.append(0)
+ SectionData.append(0)
+ Len = len(SectionData)
+ GenFdsGlobalVariable.SectionHeader.pack_into(SectionData, 0, Len & 0xff, (Len >> 8) & 0xff, (Len >> 16) & 0xff, 0x15)
+- SaveFileOnChange(Output, SectionData.tostring())
++ SaveFileOnChange(Output, SectionData.tobytes())
+
+ elif Ver:
+ Cmd += ("-n", Ver)
diff --git a/system/xen/patches/ac9d413015d3bcf1e8f31cda764590b3ee949bc1.patch b/system/xen/patches/ac9d413015d3bcf1e8f31cda764590b3ee949bc1.patch new file mode 100644 index 0000000000000..32dcd6771362e --- /dev/null +++ b/system/xen/patches/ac9d413015d3bcf1e8f31cda764590b3ee949bc1.patch @@ -0,0 +1,72 @@ +From ac9d413015d3bcf1e8f31cda764590b3ee949bc1 Mon Sep 17 00:00:00 2001 +From: Olaf Hering <olaf@aepfle.de> +Date: Wed, 17 Jun 2020 08:13:49 +0200 +Subject: [PATCH] stubdom/vtpmmgr: simplify handling of hardware_version + +Remove complicated code which deals with a simple boolean, to make gcc10 happy. + +ld: /home/abuild/rpmbuild/BUILD/xen-4.14.20200616T103126.3625b04991/non-dbg/stubdom/vtpmmgr/vtpmmgr.a(vtpm_cmd_handler.o):(.bss+0x0): multiple definition of `tpm_version'; /home/abuild/rpmbuild/BUILD/xen-4.14.20200616T103126.3625b04991/non-dbg/stubdom/vtpmmgr/vtpmmgr.a(vtpmmgr.o):(.bss+0x0): first defined here + +Signed-off-by: Olaf Hering <olaf@aepfle.de> +Message-Id: <20200617061349.7623-1-olaf@aepfle.de> +Acked-by: Samuel Thibault <samuel.thibault@ens-lyon.org> +Reviewed-by: Jason Andryuk <jandryuk@gmail.com> +--- + stubdom/vtpmmgr/vtpmmgr.c | 8 +++----- + stubdom/vtpmmgr/vtpmmgr.h | 9 --------- + 2 files changed, 3 insertions(+), 14 deletions(-) + +diff --git a/stubdom/vtpmmgr/vtpmmgr.c b/stubdom/vtpmmgr/vtpmmgr.c +index 9fddaa24f818..94578adbffdd 100644 +--- a/stubdom/vtpmmgr/vtpmmgr.c ++++ b/stubdom/vtpmmgr/vtpmmgr.c +@@ -45,9 +45,7 @@ + #include "vtpmmgr.h" + #include "tcg.h" + +-struct tpm_hardware_version hardware_version = { +- .hw_version = TPM1_HARDWARE, +-}; ++static int hardware_version; + + int parse_cmdline_hw(int argc, char** argv) + { +@@ -55,7 +53,7 @@ int parse_cmdline_hw(int argc, char** argv) + + for (i = 1; i < argc; ++i) { + if (!strcmp(argv[i], TPM2_EXTRA_OPT)) { +- hardware_version.hw_version = TPM2_HARDWARE; ++ hardware_version = 2; + break; + } + } +@@ -64,7 +62,7 @@ int parse_cmdline_hw(int argc, char** argv) + + int hw_is_tpm2(void) + { +- return (hardware_version.hw_version == TPM2_HARDWARE) ? 1 : 0; ++ return hardware_version == 2 ? 1 : 0; + } + + void main_loop(void) { +diff --git a/stubdom/vtpmmgr/vtpmmgr.h b/stubdom/vtpmmgr/vtpmmgr.h +index 2e6f8de9e435..6523604bdcf2 100644 +--- a/stubdom/vtpmmgr/vtpmmgr.h ++++ b/stubdom/vtpmmgr/vtpmmgr.h +@@ -50,16 +50,7 @@ + #define RSA_KEY_SIZE 0x0800 + #define RSA_CIPHER_SIZE (RSA_KEY_SIZE / 8) + +-enum { +- TPM1_HARDWARE = 1, +- TPM2_HARDWARE, +-} tpm_version; + +-struct tpm_hardware_version { +- int hw_version; +-}; +- +-extern struct tpm_hardware_version hardware_version; + + struct vtpm_globals { + int tpm_fd; diff --git a/system/xen/patches/qemu-xen-no-pie.diff b/system/xen/patches/qemu-xen-no-pie.diff new file mode 100644 index 0000000000000..20db095f751c8 --- /dev/null +++ b/system/xen/patches/qemu-xen-no-pie.diff @@ -0,0 +1,26 @@ +--- xen-4.15.0/tools/qemu-xen/configure.orig 2020-11-06 16:30:18.000000000 +0100 ++++ xen-4.15.0/tools/qemu-xen/configure 2021-04-10 01:32:39.533566877 +0200 +@@ -2184,7 +2184,6 @@ + # Check we support --no-pie first; we will need this for building ROMs. + if compile_prog "-Werror -fno-pie" "-no-pie"; then + CFLAGS_NOPIE="-fno-pie" +- LDFLAGS_NOPIE="-no-pie" + fi + + if test "$static" = "yes"; then +@@ -2200,7 +2199,6 @@ + fi + elif test "$pie" = "no"; then + QEMU_CFLAGS="$CFLAGS_NOPIE $QEMU_CFLAGS" +- QEMU_LDFLAGS="$LDFLAGS_NOPIE $QEMU_LDFLAGS" + elif compile_prog "-Werror -fPIE -DPIE" "-pie"; then + QEMU_CFLAGS="-fPIE -DPIE $QEMU_CFLAGS" + QEMU_LDFLAGS="-pie $QEMU_LDFLAGS" +@@ -7996,7 +7994,6 @@ + echo "QEMU_CFLAGS += -Wbitwise -Wno-transparent-union -Wno-old-initializer -Wno-non-pointer-null" >> $config_host_mak + fi + echo "QEMU_LDFLAGS=$QEMU_LDFLAGS" >> $config_host_mak +-echo "LDFLAGS_NOPIE=$LDFLAGS_NOPIE" >> $config_host_mak + echo "LD_REL_FLAGS=$LD_REL_FLAGS" >> $config_host_mak + echo "LD_I386_EMULATION=$ld_i386_emulation" >> $config_host_mak + echo "LIBS+=$LIBS" >> $config_host_mak diff --git a/system/xen/patches/symlinks_instead_of_hardlinks.diff b/system/xen/patches/symlinks_instead_of_hardlinks.diff index 92c98bd980e1a..d7cbfb6544716 100644 --- a/system/xen/patches/symlinks_instead_of_hardlinks.diff +++ b/system/xen/patches/symlinks_instead_of_hardlinks.diff @@ -1,24 +1,24 @@ ---- xen-4.6.1/tools/xenstore/Makefile.orig 2016-02-09 15:44:19.000000000 +0100 -+++ xen-4.6.1/tools/xenstore/Makefile 2016-02-20 22:54:11.877906517 +0100 -@@ -84,7 +84,7 @@ +--- xen-4.15.0/tools/xenstore/Makefile.orig 2021-04-06 19:14:18.000000000 +0200 ++++ xen-4.15.0/tools/xenstore/Makefile 2021-04-09 20:43:12.613910598 +0200 +@@ -76,7 +76,7 @@ $(AR) cr $@ $^ $(CLIENTS): xenstore - ln -f xenstore $@ + ln -sf xenstore $@ - xenstore: xenstore_client.o $(LIBXENSTORE) - $(CC) $< $(LDFLAGS) $(LDLIBS_libxenstore) $(SOCKET_LIBS) -o $@ $(APPEND_LDFLAGS) -@@ -140,7 +140,7 @@ + xenstore: xenstore_client.o + $(CC) $< $(LDFLAGS) $(LDLIBS_libxenstore) $(LDLIBS_libxentoolcore) $(SOCKET_LIBS) -o $@ $(APPEND_LDFLAGS) +@@ -117,7 +117,7 @@ $(INSTALL_PROG) xenstore-control $(DESTDIR)$(bindir) $(INSTALL_PROG) xenstore $(DESTDIR)$(bindir) set -e ; for c in $(CLIENTS) ; do \ - ln -f $(DESTDIR)$(bindir)/xenstore $(DESTDIR)$(bindir)/$${c} ; \ + ln -sf xenstore $(DESTDIR)$(bindir)/$${c} ; \ done - $(INSTALL_DIR) $(DESTDIR)$(libdir) - $(INSTALL_SHLIB) libxenstore.so.$(MAJOR).$(MINOR) $(DESTDIR)$(libdir) -@@ -159,7 +159,7 @@ + + .PHONY: uninstall +@@ -144,7 +144,7 @@ $(INSTALL_DIR) $(DESTDIR)$(bindir) $(INSTALL_PROG) xenstore $(DESTDIR)$(bindir) set -e ; for c in $(CLIENTS) ; do \ @@ -26,4 +26,4 @@ + ln -sf xenstore $(DESTDIR)$(bindir)/$${c} ; \ done - -include $(DEPS) + -include $(DEPS_INCLUDE) diff --git a/system/xen/xen.SlackBuild b/system/xen/xen.SlackBuild index 959ae1ec2b898..ad33633ef05a1 100644 --- a/system/xen/xen.SlackBuild +++ b/system/xen/xen.SlackBuild @@ -2,7 +2,7 @@ # Slackware build script for xen -# Copyright 2010, 2011, 2013, 2014, 2015, 2016, 2017, 2018, 2019, 2020 Mario Preksavec, Zagreb, Croatia +# Copyright 2010, 2021 Mario Preksavec, Zagreb, Croatia # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -25,14 +25,14 @@ cd $(dirname $0) ; CWD=$(pwd) PRGNAM=xen -VERSION=${VERSION:-4.13.1} -BUILD=${BUILD:-3} +VERSION=${VERSION:-4.15.0} +BUILD=${BUILD:-1} TAG=${TAG:-_SBo} PKGTYPE=${PKGTYPE:-tgz} -SEABIOS=${SEABIOS:-1.12.1} -OVMF=${OVMF:-20190606_20d2e5a125} -IPXE=${IPXE:-1dd56dbd11082fb622c2ed21cfaced4f47d798a6} +SEABIOS=${SEABIOS:-1.14.0} +OVMF=${OVMF:-20200807_a3741780fe} +IPXE=${IPXE:-988d2c13cdf0f0b4140685af35ced70ac5b3283c} if [ -z "$ARCH" ]; then case "$( uname -m )" in @@ -55,11 +55,12 @@ PKG=$TMP/package-$PRGNAM OUTPUT=${OUTPUT:-/tmp} if [ "$ARCH" = "i586" ]; then - SLKCFLAGS="-O2 -march=i586 -mtune=i686" - LIBDIRSUFFIX="" -elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mtune=i686" - LIBDIRSUFFIX="" + cat << EOF + + *** Xen x86/32 target no longer supported! + +EOF + exit elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" LIBDIRSUFFIX="64" @@ -105,11 +106,6 @@ case "${USE_LIBSSH:-no}" in *) CONF_QEMUU+=" --disable-libssh" ;; esac -case "${USE_BLUEZ:-no}" in - yes) CONF_QEMUU+=" --enable-bluez" ;; - *) CONF_QEMUU+=" --disable-bluez" ;; -esac - case "${USE_GTK:-no}" in yes) CONF_QEMUU+=" --enable-gtk" ;; *) CONF_QEMUU+=" --disable-gtk" ;; @@ -179,6 +175,16 @@ if [ "$(ldd --version | awk '{print $NF; exit}')" = "2.27" ]; then ( cd tools/qemu-xen && patch -p1 <$CWD/patches/glibc-memfd_fix_configure_test.patch ) fi +# Fix ovmf firmware build +( cd tools/firmware/ovmf-dir-remote && \ + patch -p1 <$CWD/patches/0001-BaseTools-fix-ucs-2-lookup-on-python-3.9.patch + patch -p1 <$CWD/patches/0002-BaseTools-Work-around-array.array.tostring-removal-i.patch + patch -p1 <$CWD/patches/0003-BaseTools-replace-deprecated-fromstring-and-tostring.diff +) + +# Fix binutils-2.36 build +patch -p1 <$CWD/patches/qemu-xen-no-pie.diff + CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure \ @@ -200,6 +206,9 @@ make install-xen \ MANDIR=/usr/man \ DESTDIR=$PKG +echo CONFIG_GOLANG=n >> xen/.config +echo CONFIG_GOLANG=n > tools/.config + make install-tools \ docdir=/usr/doc/$PRGNAM-$VERSION \ DOCDIR=/usr/doc/$PRGNAM-$VERSION \ diff --git a/system/xen/xen.info b/system/xen/xen.info index c74e7f07d1beb..a947091453ce7 100644 --- a/system/xen/xen.info +++ b/system/xen/xen.info @@ -1,8 +1,8 @@ PRGNAM="xen" -VERSION="4.13.1" +VERSION="4.15.0" HOMEPAGE="http://www.xenproject.org/" -DOWNLOAD="http://mirror.slackware.hr/sources/xen/xen-4.13.1.tar.gz \ - http://mirror.slackware.hr/sources/xen-extfiles/ipxe-git-1dd56dbd11082fb622c2ed21cfaced4f47d798a6.tar.gz \ +DOWNLOAD="http://mirror.slackware.hr/sources/xen/xen-4.15.0.tar.gz \ + http://mirror.slackware.hr/sources/xen-extfiles/ipxe-git-988d2c13cdf0f0b4140685af35ced70ac5b3283c.tar.gz \ http://mirror.slackware.hr/sources/xen-extfiles/lwip-1.3.0.tar.gz \ http://mirror.slackware.hr/sources/xen-extfiles/zlib-1.2.3.tar.gz \ http://mirror.slackware.hr/sources/xen-extfiles/newlib-1.16.0.tar.gz \ @@ -11,10 +11,10 @@ DOWNLOAD="http://mirror.slackware.hr/sources/xen/xen-4.13.1.tar.gz \ http://mirror.slackware.hr/sources/xen-extfiles/polarssl-1.1.4-gpl.tgz \ http://mirror.slackware.hr/sources/xen-extfiles/gmp-4.3.2.tar.bz2 \ http://mirror.slackware.hr/sources/xen-extfiles/tpm_emulator-0.7.4.tar.gz \ - http://mirror.slackware.hr/sources/xen-seabios/seabios-1.12.1.tar.gz \ - http://mirror.slackware.hr/sources/xen-ovmf/xen-ovmf-20190606_20d2e5a125.tar.bz2" -MD5SUM="e26fe8f9ce39463734e6ede45c6e11b8 \ - b3ab0488a989a089207302111d12e1a0 \ + http://mirror.slackware.hr/sources/xen-seabios/seabios-1.14.0.tar.gz \ + http://mirror.slackware.hr/sources/xen-ovmf/xen-ovmf-20200807_a3741780fe.tar.bz2" +MD5SUM="899d5b9dd6725543cf3b224de9a5d27a \ + 1c3f5c0d6d824697361481aa7004fc5b \ 36cc57650cffda9a0269493be2a169bb \ debc62758716a169df9f62e6ab2bc634 \ bf8f1f9e3ca83d732c00a79a6ef29bc4 \ @@ -23,8 +23,8 @@ MD5SUM="e26fe8f9ce39463734e6ede45c6e11b8 \ 7b72caf22b01464ee7d6165f2fd85f44 \ dd60683d7057917e34630b4a787932e8 \ e26becb8a6a2b6695f6b3e8097593db8 \ - 6cb6cba431fd725126ddb5ec529ab85c \ - a6063a0d3d45e6f77deea8c80569653e" + 9df3b7de6376850d09161137e7a9b61f \ + b5a9f9870e147106cd917afba83011e2" DOWNLOAD_x86_64="" MD5SUM_x86_64="" REQUIRES="acpica yajl" diff --git a/system/xen/xsa/xsa317.patch b/system/xen/xsa/xsa317.patch deleted file mode 100644 index 20e2c643d065e..0000000000000 --- a/system/xen/xsa/xsa317.patch +++ /dev/null @@ -1,50 +0,0 @@ -From aeb46e92f915f19a61d5a8a1f4b696793f64e6fb Mon Sep 17 00:00:00 2001 -From: Julien Grall <jgrall@amazon.com> -Date: Thu, 19 Mar 2020 13:17:31 +0000 -Subject: [PATCH] xen/common: event_channel: Don't ignore error in - get_free_port() - -Currently, get_free_port() is assuming that the port has been allocated -when evtchn_allocate_port() is not return -EBUSY. - -However, the function may return an error when: - - We exhausted all the event channels. This can happen if the limit - configured by the administrator for the guest ('max_event_channels' - in xl cfg) is higher than the ABI used by the guest. For instance, - if the guest is using 2L, the limit should not be higher than 4095. - - We cannot allocate memory (e.g Xen has not more memory). - -Users of get_free_port() (such as EVTCHNOP_alloc_unbound) will validly -assuming the port was valid and will next call evtchn_from_port(). This -will result to a crash as the memory backing the event channel structure -is not present. - -Fixes: 368ae9a05fe ("xen/pvshim: forward evtchn ops between L0 Xen and L2 DomU") -Signed-off-by: Julien Grall <jgrall@amazon.com> -Reviewed-by: Jan Beulich <jbeulich@suse.com> ---- - xen/common/event_channel.c | 8 ++++---- - 1 file changed, 4 insertions(+), 4 deletions(-) - -diff --git a/xen/common/event_channel.c b/xen/common/event_channel.c -index e86e2bfab0..a8d182b584 100644 ---- a/xen/common/event_channel.c -+++ b/xen/common/event_channel.c -@@ -195,10 +195,10 @@ static int get_free_port(struct domain *d) - { - int rc = evtchn_allocate_port(d, port); - -- if ( rc == -EBUSY ) -- continue; -- -- return port; -+ if ( rc == 0 ) -+ return port; -+ else if ( rc != -EBUSY ) -+ return rc; - } - - return -ENOSPC; --- -2.17.1 - diff --git a/system/xen/xsa/xsa319.patch b/system/xen/xsa/xsa319.patch deleted file mode 100644 index 769443c900eb0..0000000000000 --- a/system/xen/xsa/xsa319.patch +++ /dev/null @@ -1,27 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: x86/shadow: correct an inverted conditional in dirty VRAM tracking - -This originally was "mfn_x(mfn) == INVALID_MFN". Make it like this -again, taking the opportunity to also drop the unnecessary nearby -braces. - -This is XSA-319. - -Fixes: 246a5a3377c2 ("xen: Use a typesafe to define INVALID_MFN") -Signed-off-by: Jan Beulich <jbeulich@suse.com> -Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> - ---- a/xen/arch/x86/mm/shadow/common.c -+++ b/xen/arch/x86/mm/shadow/common.c -@@ -3252,10 +3252,8 @@ int shadow_track_dirty_vram(struct domai - int dirty = 0; - paddr_t sl1ma = dirty_vram->sl1ma[i]; - -- if ( !mfn_eq(mfn, INVALID_MFN) ) -- { -+ if ( mfn_eq(mfn, INVALID_MFN) ) - dirty = 1; -- } - else - { - page = mfn_to_page(mfn); diff --git a/system/xen/xsa/xsa320-4.13-1.patch b/system/xen/xsa/xsa320-4.13-1.patch deleted file mode 100644 index 09eb8ea98e2b4..0000000000000 --- a/system/xen/xsa/xsa320-4.13-1.patch +++ /dev/null @@ -1,117 +0,0 @@ -From: Andrew Cooper <andrew.cooper3@citrix.com> -Subject: x86/spec-ctrl: CPUID/MSR definitions for Special Register Buffer Data Sampling - -This is part of XSA-320 / CVE-2020-0543 - -Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> -Reviewed-by: Jan Beulich <jbeulich@suse.com> -Acked-by: Wei Liu <wl@xen.org> - -diff --git a/docs/misc/xen-command-line.pandoc b/docs/misc/xen-command-line.pandoc -index 1d9d816622..9268454297 100644 ---- a/docs/misc/xen-command-line.pandoc -+++ b/docs/misc/xen-command-line.pandoc -@@ -483,10 +483,10 @@ accounting for hardware capabilities as enumerated via CPUID. - - Currently accepted: - --The Speculation Control hardware features `md-clear`, `ibrsb`, `stibp`, `ibpb`, --`l1d-flush` and `ssbd` are used by default if available and applicable. They can --be ignored, e.g. `no-ibrsb`, at which point Xen won't use them itself, and --won't offer them to guests. -+The Speculation Control hardware features `srbds-ctrl`, `md-clear`, `ibrsb`, -+`stibp`, `ibpb`, `l1d-flush` and `ssbd` are used by default if available and -+applicable. They can be ignored, e.g. `no-ibrsb`, at which point Xen won't -+use them itself, and won't offer them to guests. - - ### cpuid_mask_cpu - > `= fam_0f_rev_[cdefg] | fam_10_rev_[bc] | fam_11_rev_b` -diff --git a/tools/libxl/libxl_cpuid.c b/tools/libxl/libxl_cpuid.c -index 6cea4227ba..a78f08b927 100644 ---- a/tools/libxl/libxl_cpuid.c -+++ b/tools/libxl/libxl_cpuid.c -@@ -213,6 +213,7 @@ int libxl_cpuid_parse_config(libxl_cpuid_policy_list *cpuid, const char* str) - - {"avx512-4vnniw",0x00000007, 0, CPUID_REG_EDX, 2, 1}, - {"avx512-4fmaps",0x00000007, 0, CPUID_REG_EDX, 3, 1}, -+ {"srbds-ctrl", 0x00000007, 0, CPUID_REG_EDX, 9, 1}, - {"md-clear", 0x00000007, 0, CPUID_REG_EDX, 10, 1}, - {"cet-ibt", 0x00000007, 0, CPUID_REG_EDX, 20, 1}, - {"ibrsb", 0x00000007, 0, CPUID_REG_EDX, 26, 1}, -diff --git a/tools/misc/xen-cpuid.c b/tools/misc/xen-cpuid.c -index 603e1d65fd..a09440813b 100644 ---- a/tools/misc/xen-cpuid.c -+++ b/tools/misc/xen-cpuid.c -@@ -157,6 +157,7 @@ static const char *const str_7d0[32] = - [ 2] = "avx512_4vnniw", [ 3] = "avx512_4fmaps", - [ 4] = "fsrm", - -+ /* 8 */ [ 9] = "srbds-ctrl", - [10] = "md-clear", - /* 12 */ [13] = "tsx-force-abort", - -diff --git a/xen/arch/x86/msr.c b/xen/arch/x86/msr.c -index 4b12103482..0cded3c0ad 100644 ---- a/xen/arch/x86/msr.c -+++ b/xen/arch/x86/msr.c -@@ -134,6 +134,7 @@ int guest_rdmsr(struct vcpu *v, uint32_t msr, uint64_t *val) - /* Write-only */ - case MSR_TSX_FORCE_ABORT: - case MSR_TSX_CTRL: -+ case MSR_MCU_OPT_CTRL: - case MSR_U_CET: - case MSR_S_CET: - case MSR_PL0_SSP ... MSR_INTERRUPT_SSP_TABLE: -@@ -288,6 +289,7 @@ int guest_wrmsr(struct vcpu *v, uint32_t msr, uint64_t val) - /* Read-only */ - case MSR_TSX_FORCE_ABORT: - case MSR_TSX_CTRL: -+ case MSR_MCU_OPT_CTRL: - case MSR_U_CET: - case MSR_S_CET: - case MSR_PL0_SSP ... MSR_INTERRUPT_SSP_TABLE: -diff --git a/xen/arch/x86/spec_ctrl.c b/xen/arch/x86/spec_ctrl.c -index 6656c44aec..5fc1c6827e 100644 ---- a/xen/arch/x86/spec_ctrl.c -+++ b/xen/arch/x86/spec_ctrl.c -@@ -312,12 +312,13 @@ static void __init print_details(enum ind_thunk thunk, uint64_t caps) - printk("Speculative mitigation facilities:\n"); - - /* Hardware features which pertain to speculative mitigations. */ -- printk(" Hardware features:%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n", -+ printk(" Hardware features:%s%s%s%s%s%s%s%s%s%s%s%s%s%s%s\n", - (_7d0 & cpufeat_mask(X86_FEATURE_IBRSB)) ? " IBRS/IBPB" : "", - (_7d0 & cpufeat_mask(X86_FEATURE_STIBP)) ? " STIBP" : "", - (_7d0 & cpufeat_mask(X86_FEATURE_L1D_FLUSH)) ? " L1D_FLUSH" : "", - (_7d0 & cpufeat_mask(X86_FEATURE_SSBD)) ? " SSBD" : "", - (_7d0 & cpufeat_mask(X86_FEATURE_MD_CLEAR)) ? " MD_CLEAR" : "", -+ (_7d0 & cpufeat_mask(X86_FEATURE_SRBDS_CTRL)) ? " SRBDS_CTRL" : "", - (e8b & cpufeat_mask(X86_FEATURE_IBPB)) ? " IBPB" : "", - (caps & ARCH_CAPS_IBRS_ALL) ? " IBRS_ALL" : "", - (caps & ARCH_CAPS_RDCL_NO) ? " RDCL_NO" : "", -diff --git a/xen/include/asm-x86/msr-index.h b/xen/include/asm-x86/msr-index.h -index 7693c4a71a..91994669e1 100644 ---- a/xen/include/asm-x86/msr-index.h -+++ b/xen/include/asm-x86/msr-index.h -@@ -179,6 +179,9 @@ - #define MSR_IA32_VMX_TRUE_ENTRY_CTLS 0x490 - #define MSR_IA32_VMX_VMFUNC 0x491 - -+#define MSR_MCU_OPT_CTRL 0x00000123 -+#define MCU_OPT_CTRL_RNGDS_MITG_DIS (_AC(1, ULL) << 0) -+ - #define MSR_U_CET 0x000006a0 - #define MSR_S_CET 0x000006a2 - #define MSR_PL0_SSP 0x000006a4 -diff --git a/xen/include/public/arch-x86/cpufeatureset.h b/xen/include/public/arch-x86/cpufeatureset.h -index 2835688f1c..a2482c3627 100644 ---- a/xen/include/public/arch-x86/cpufeatureset.h -+++ b/xen/include/public/arch-x86/cpufeatureset.h -@@ -252,6 +252,7 @@ XEN_CPUFEATURE(IBPB, 8*32+12) /*A IBPB support only (no IBRS, used by - /* Intel-defined CPU features, CPUID level 0x00000007:0.edx, word 9 */ - XEN_CPUFEATURE(AVX512_4VNNIW, 9*32+ 2) /*A AVX512 Neural Network Instructions */ - XEN_CPUFEATURE(AVX512_4FMAPS, 9*32+ 3) /*A AVX512 Multiply Accumulation Single Precision */ -+XEN_CPUFEATURE(SRBDS_CTRL, 9*32+ 9) /* MSR_MCU_OPT_CTRL and RNGDS_MITG_DIS. */ - XEN_CPUFEATURE(MD_CLEAR, 9*32+10) /*A VERW clears microarchitectural buffers */ - XEN_CPUFEATURE(TSX_FORCE_ABORT, 9*32+13) /* MSR_TSX_FORCE_ABORT.RTM_ABORT */ - XEN_CPUFEATURE(CET_IBT, 9*32+20) /* CET - Indirect Branch Tracking */ diff --git a/system/xen/xsa/xsa320-4.13-2.patch b/system/xen/xsa/xsa320-4.13-2.patch deleted file mode 100644 index 8a8080a312c8b..0000000000000 --- a/system/xen/xsa/xsa320-4.13-2.patch +++ /dev/null @@ -1,179 +0,0 @@ -From: Andrew Cooper <andrew.cooper3@citrix.com> -Subject: x86/spec-ctrl: Mitigate the Special Register Buffer Data Sampling sidechannel - -See patch documentation and comments. - -This is part of XSA-320 / CVE-2020-0543 - -Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> -Reviewed-by: Jan Beulich <jbeulich@suse.com> - -diff --git a/docs/misc/xen-command-line.pandoc b/docs/misc/xen-command-line.pandoc -index 9268454297..c780312531 100644 ---- a/docs/misc/xen-command-line.pandoc -+++ b/docs/misc/xen-command-line.pandoc -@@ -1991,7 +1991,7 @@ By default SSBD will be mitigated at runtime (i.e `ssbd=runtime`). - ### spec-ctrl (x86) - > `= List of [ <bool>, xen=<bool>, {pv,hvm,msr-sc,rsb,md-clear}=<bool>, - > bti-thunk=retpoline|lfence|jmp, {ibrs,ibpb,ssbd,eager-fpu, --> l1d-flush,branch-harden}=<bool> ]` -+> l1d-flush,branch-harden,srb-lock}=<bool> ]` - - Controls for speculative execution sidechannel mitigations. By default, Xen - will pick the most appropriate mitigations based on compiled in support, -@@ -2068,6 +2068,12 @@ If Xen is compiled with `CONFIG_SPECULATIVE_HARDEN_BRANCH`, the - speculation barriers to protect selected conditional branches. By default, - Xen will enable this mitigation. - -+On hardware supporting SRBDS_CTRL, the `srb-lock=` option can be used to force -+or prevent Xen from protect the Special Register Buffer from leaking stale -+data. By default, Xen will enable this mitigation, except on parts where MDS -+is fixed and TAA is fixed/mitigated (in which case, there is believed to be no -+way for an attacker to obtain the stale data). -+ - ### sync_console - > `= <boolean>` - -diff --git a/xen/arch/x86/acpi/power.c b/xen/arch/x86/acpi/power.c -index feb0f6ce20..75c6e34164 100644 ---- a/xen/arch/x86/acpi/power.c -+++ b/xen/arch/x86/acpi/power.c -@@ -295,6 +295,9 @@ static int enter_state(u32 state) - ci->spec_ctrl_flags |= (default_spec_ctrl_flags & SCF_ist_wrmsr); - spec_ctrl_exit_idle(ci); - -+ if ( boot_cpu_has(X86_FEATURE_SRBDS_CTRL) ) -+ wrmsrl(MSR_MCU_OPT_CTRL, default_xen_mcu_opt_ctrl); -+ - done: - spin_debug_enable(); - local_irq_restore(flags); -diff --git a/xen/arch/x86/smpboot.c b/xen/arch/x86/smpboot.c -index dc8fdac1a1..b1e51b3aff 100644 ---- a/xen/arch/x86/smpboot.c -+++ b/xen/arch/x86/smpboot.c -@@ -361,12 +361,14 @@ void start_secondary(void *unused) - microcode_update_one(false); - - /* -- * If MSR_SPEC_CTRL is available, apply Xen's default setting and discard -- * any firmware settings. Note: MSR_SPEC_CTRL may only become available -- * after loading microcode. -+ * If any speculative control MSRs are available, apply Xen's default -+ * settings. Note: These MSRs may only become available after loading -+ * microcode. - */ - if ( boot_cpu_has(X86_FEATURE_IBRSB) ) - wrmsrl(MSR_SPEC_CTRL, default_xen_spec_ctrl); -+ if ( boot_cpu_has(X86_FEATURE_SRBDS_CTRL) ) -+ wrmsrl(MSR_MCU_OPT_CTRL, default_xen_mcu_opt_ctrl); - - tsx_init(); /* Needs microcode. May change HLE/RTM feature bits. */ - -diff --git a/xen/arch/x86/spec_ctrl.c b/xen/arch/x86/spec_ctrl.c -index 5fc1c6827e..33343062a7 100644 ---- a/xen/arch/x86/spec_ctrl.c -+++ b/xen/arch/x86/spec_ctrl.c -@@ -65,6 +65,9 @@ static unsigned int __initdata l1d_maxphysaddr; - static bool __initdata cpu_has_bug_msbds_only; /* => minimal HT impact. */ - static bool __initdata cpu_has_bug_mds; /* Any other M{LP,SB,FB}DS combination. */ - -+static int8_t __initdata opt_srb_lock = -1; -+uint64_t __read_mostly default_xen_mcu_opt_ctrl; -+ - static int __init parse_spec_ctrl(const char *s) - { - const char *ss; -@@ -112,6 +115,7 @@ static int __init parse_spec_ctrl(const char *s) - opt_ssbd = false; - opt_l1d_flush = 0; - opt_branch_harden = false; -+ opt_srb_lock = 0; - } - else if ( val > 0 ) - rc = -EINVAL; -@@ -178,6 +182,8 @@ static int __init parse_spec_ctrl(const char *s) - opt_l1d_flush = val; - else if ( (val = parse_boolean("branch-harden", s, ss)) >= 0 ) - opt_branch_harden = val; -+ else if ( (val = parse_boolean("srb-lock", s, ss)) >= 0 ) -+ opt_srb_lock = val; - else - rc = -EINVAL; - -@@ -341,7 +347,7 @@ static void __init print_details(enum ind_thunk thunk, uint64_t caps) - "\n"); - - /* Settings for Xen's protection, irrespective of guests. */ -- printk(" Xen settings: BTI-Thunk %s, SPEC_CTRL: %s%s%s, Other:%s%s%s%s\n", -+ printk(" Xen settings: BTI-Thunk %s, SPEC_CTRL: %s%s%s, Other:%s%s%s%s%s\n", - thunk == THUNK_NONE ? "N/A" : - thunk == THUNK_RETPOLINE ? "RETPOLINE" : - thunk == THUNK_LFENCE ? "LFENCE" : -@@ -352,6 +358,8 @@ static void __init print_details(enum ind_thunk thunk, uint64_t caps) - (default_xen_spec_ctrl & SPEC_CTRL_SSBD) ? " SSBD+" : " SSBD-", - !(caps & ARCH_CAPS_TSX_CTRL) ? "" : - (opt_tsx & 1) ? " TSX+" : " TSX-", -+ !boot_cpu_has(X86_FEATURE_SRBDS_CTRL) ? "" : -+ opt_srb_lock ? " SRB_LOCK+" : " SRB_LOCK-", - opt_ibpb ? " IBPB" : "", - opt_l1d_flush ? " L1D_FLUSH" : "", - opt_md_clear_pv || opt_md_clear_hvm ? " VERW" : "", -@@ -1149,6 +1157,34 @@ void __init init_speculation_mitigations(void) - tsx_init(); - } - -+ /* Calculate suitable defaults for MSR_MCU_OPT_CTRL */ -+ if ( boot_cpu_has(X86_FEATURE_SRBDS_CTRL) ) -+ { -+ uint64_t val; -+ -+ rdmsrl(MSR_MCU_OPT_CTRL, val); -+ -+ /* -+ * On some SRBDS-affected hardware, it may be safe to relax srb-lock -+ * by default. -+ * -+ * On parts which enumerate MDS_NO and not TAA_NO, TSX is the only way -+ * to access the Fill Buffer. If TSX isn't available (inc. SKU -+ * reasons on some models), or TSX is explicitly disabled, then there -+ * is no need for the extra overhead to protect RDRAND/RDSEED. -+ */ -+ if ( opt_srb_lock == -1 && -+ (caps & (ARCH_CAPS_MDS_NO|ARCH_CAPS_TAA_NO)) == ARCH_CAPS_MDS_NO && -+ (!cpu_has_hle || ((caps & ARCH_CAPS_TSX_CTRL) && opt_tsx == 0)) ) -+ opt_srb_lock = 0; -+ -+ val &= ~MCU_OPT_CTRL_RNGDS_MITG_DIS; -+ if ( !opt_srb_lock ) -+ val |= MCU_OPT_CTRL_RNGDS_MITG_DIS; -+ -+ default_xen_mcu_opt_ctrl = val; -+ } -+ - print_details(thunk, caps); - - /* -@@ -1180,6 +1216,9 @@ void __init init_speculation_mitigations(void) - - wrmsrl(MSR_SPEC_CTRL, bsp_delay_spec_ctrl ? 0 : default_xen_spec_ctrl); - } -+ -+ if ( boot_cpu_has(X86_FEATURE_SRBDS_CTRL) ) -+ wrmsrl(MSR_MCU_OPT_CTRL, default_xen_mcu_opt_ctrl); - } - - static void __init __maybe_unused build_assertions(void) -diff --git a/xen/include/asm-x86/spec_ctrl.h b/xen/include/asm-x86/spec_ctrl.h -index 9caecddfec..b252bb8631 100644 ---- a/xen/include/asm-x86/spec_ctrl.h -+++ b/xen/include/asm-x86/spec_ctrl.h -@@ -54,6 +54,8 @@ extern int8_t opt_pv_l1tf_hwdom, opt_pv_l1tf_domu; - */ - extern paddr_t l1tf_addr_mask, l1tf_safe_maddr; - -+extern uint64_t default_xen_mcu_opt_ctrl; -+ - static inline void init_shadow_spec_ctrl_state(void) - { - struct cpu_info *info = get_cpu_info(); diff --git a/system/xen/xsa/xsa320-4.13-3.patch b/system/xen/xsa/xsa320-4.13-3.patch deleted file mode 100644 index b52eeb338adad..0000000000000 --- a/system/xen/xsa/xsa320-4.13-3.patch +++ /dev/null @@ -1,36 +0,0 @@ -From: Andrew Cooper <andrew.cooper3@citrix.com> -Subject: x86/spec-ctrl: Update docs with SRBDS workaround - -RDRAND/RDSEED can be hidden using cpuid= to mitigate SRBDS if microcode -isn't available. - -This is part of XSA-320 / CVE-2020-0543. - -Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> -Acked-by: Julien Grall <jgrall@amazon.com> - -diff --git a/docs/misc/xen-command-line.pandoc b/docs/misc/xen-command-line.pandoc -index c780312531..81e12d053c 100644 ---- a/docs/misc/xen-command-line.pandoc -+++ b/docs/misc/xen-command-line.pandoc -@@ -481,12 +481,18 @@ choice of `dom0-kernel` is deprecated and not supported by all Dom0 kernels. - This option allows for fine tuning of the facilities Xen will use, after - accounting for hardware capabilities as enumerated via CPUID. - -+Unless otherwise noted, options only have any effect in their negative form, -+to hide the named feature(s). Ignoring a feature using this mechanism will -+cause Xen not to use the feature, nor offer them as usable to guests. -+ - Currently accepted: - - The Speculation Control hardware features `srbds-ctrl`, `md-clear`, `ibrsb`, - `stibp`, `ibpb`, `l1d-flush` and `ssbd` are used by default if available and --applicable. They can be ignored, e.g. `no-ibrsb`, at which point Xen won't --use them itself, and won't offer them to guests. -+applicable. They can all be ignored. -+ -+`rdrand` and `rdseed` can be ignored, as a mitigation to XSA-320 / -+CVE-2020-0543. - - ### cpuid_mask_cpu - > `= fam_0f_rev_[cdefg] | fam_10_rev_[bc] | fam_11_rev_b` diff --git a/system/xen/xsa/xsa327.patch b/system/xen/xsa/xsa327.patch deleted file mode 100644 index 0541cfa0df8c3..0000000000000 --- a/system/xen/xsa/xsa327.patch +++ /dev/null @@ -1,63 +0,0 @@ -From 030300ebbb86c40c12db038714479d746167c767 Mon Sep 17 00:00:00 2001 -From: Julien Grall <jgrall@amazon.com> -Date: Tue, 26 May 2020 18:31:33 +0100 -Subject: [PATCH] xen: Check the alignment of the offset pased via - VCPUOP_register_vcpu_info - -Currently a guest is able to register any guest physical address to use -for the vcpu_info structure as long as the structure can fits in the -rest of the frame. - -This means a guest can provide an address that is not aligned to the -natural alignment of the structure. - -On Arm 32-bit, unaligned access are completely forbidden by the -hypervisor. This will result to a data abort which is fatal. - -On Arm 64-bit, unaligned access are only forbidden when used for atomic -access. As the structure contains fields (such as evtchn_pending_self) -that are updated using atomic operations, any unaligned access will be -fatal as well. - -While the misalignment is only fatal on Arm, a generic check is added -as an x86 guest shouldn't sensibly pass an unaligned address (this -would result to a split lock). - -This is XSA-327. - -Reported-by: Julien Grall <jgrall@amazon.com> -Signed-off-by: Julien Grall <jgrall@amazon.com> -Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> -Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> ---- - xen/common/domain.c | 10 ++++++++++ - 1 file changed, 10 insertions(+) - -diff --git a/xen/common/domain.c b/xen/common/domain.c -index 7cc9526139a6..e9be05f1d05f 100644 ---- a/xen/common/domain.c -+++ b/xen/common/domain.c -@@ -1227,10 +1227,20 @@ int map_vcpu_info(struct vcpu *v, unsigned long gfn, unsigned offset) - void *mapping; - vcpu_info_t *new_info; - struct page_info *page; -+ unsigned int align; - - if ( offset > (PAGE_SIZE - sizeof(vcpu_info_t)) ) - return -EINVAL; - -+#ifdef CONFIG_COMPAT -+ if ( has_32bit_shinfo(d) ) -+ align = alignof(new_info->compat); -+ else -+#endif -+ align = alignof(*new_info); -+ if ( offset & (align - 1) ) -+ return -EINVAL; -+ - if ( !mfn_eq(v->vcpu_info_mfn, INVALID_MFN) ) - return -EINVAL; - --- -2.17.1 - diff --git a/system/xen/xsa/xsa328-4.13-1.patch b/system/xen/xsa/xsa328-4.13-1.patch deleted file mode 100644 index 56e48de3e9544..0000000000000 --- a/system/xen/xsa/xsa328-4.13-1.patch +++ /dev/null @@ -1,118 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: x86/EPT: ept_set_middle_entry() related adjustments - -ept_split_super_page() wants to further modify the newly allocated -table, so have ept_set_middle_entry() return the mapped pointer rather -than tearing it down and then getting re-established right again. - -Similarly ept_next_level() wants to hand back a mapped pointer of -the next level page, so re-use the one established by -ept_set_middle_entry() in case that path was taken. - -Pull the setting of suppress_ve ahead of insertion into the higher level -table, and don't have ept_split_super_page() set the field a 2nd time. - -This is part of XSA-328. - -Signed-off-by: Jan Beulich <jbeulich@suse.com> - ---- a/xen/arch/x86/mm/p2m-ept.c -+++ b/xen/arch/x86/mm/p2m-ept.c -@@ -187,8 +187,9 @@ static void ept_p2m_type_to_flags(struct - #define GUEST_TABLE_SUPER_PAGE 2 - #define GUEST_TABLE_POD_PAGE 3 - --/* Fill in middle levels of ept table */ --static int ept_set_middle_entry(struct p2m_domain *p2m, ept_entry_t *ept_entry) -+/* Fill in middle level of ept table; return pointer to mapped new table. */ -+static ept_entry_t *ept_set_middle_entry(struct p2m_domain *p2m, -+ ept_entry_t *ept_entry) - { - mfn_t mfn; - ept_entry_t *table; -@@ -196,7 +197,12 @@ static int ept_set_middle_entry(struct p - - mfn = p2m_alloc_ptp(p2m, 0); - if ( mfn_eq(mfn, INVALID_MFN) ) -- return 0; -+ return NULL; -+ -+ table = map_domain_page(mfn); -+ -+ for ( i = 0; i < EPT_PAGETABLE_ENTRIES; i++ ) -+ table[i].suppress_ve = 1; - - ept_entry->epte = 0; - ept_entry->mfn = mfn_x(mfn); -@@ -208,14 +214,7 @@ static int ept_set_middle_entry(struct p - - ept_entry->suppress_ve = 1; - -- table = map_domain_page(mfn); -- -- for ( i = 0; i < EPT_PAGETABLE_ENTRIES; i++ ) -- table[i].suppress_ve = 1; -- -- unmap_domain_page(table); -- -- return 1; -+ return table; - } - - /* free ept sub tree behind an entry */ -@@ -253,10 +252,10 @@ static bool_t ept_split_super_page(struc - - ASSERT(is_epte_superpage(ept_entry)); - -- if ( !ept_set_middle_entry(p2m, &new_ept) ) -+ table = ept_set_middle_entry(p2m, &new_ept); -+ if ( !table ) - return 0; - -- table = map_domain_page(_mfn(new_ept.mfn)); - trunk = 1UL << ((level - 1) * EPT_TABLE_ORDER); - - for ( i = 0; i < EPT_PAGETABLE_ENTRIES; i++ ) -@@ -267,7 +266,6 @@ static bool_t ept_split_super_page(struc - epte->sp = (level > 1); - epte->mfn += i * trunk; - epte->snp = is_iommu_enabled(p2m->domain) && iommu_snoop; -- epte->suppress_ve = 1; - - ept_p2m_type_to_flags(p2m, epte, epte->sa_p2mt, epte->access); - -@@ -306,8 +304,7 @@ static int ept_next_level(struct p2m_dom - ept_entry_t **table, unsigned long *gfn_remainder, - int next_level) - { -- unsigned long mfn; -- ept_entry_t *ept_entry, e; -+ ept_entry_t *ept_entry, *next = NULL, e; - u32 shift, index; - - shift = next_level * EPT_TABLE_ORDER; -@@ -332,19 +329,17 @@ static int ept_next_level(struct p2m_dom - if ( read_only ) - return GUEST_TABLE_MAP_FAILED; - -- if ( !ept_set_middle_entry(p2m, ept_entry) ) -+ next = ept_set_middle_entry(p2m, ept_entry); -+ if ( !next ) - return GUEST_TABLE_MAP_FAILED; -- else -- e = atomic_read_ept_entry(ept_entry); /* Refresh */ -+ /* e is now stale and hence may not be used anymore below. */ - } -- - /* The only time sp would be set here is if we had hit a superpage */ -- if ( is_epte_superpage(&e) ) -+ else if ( is_epte_superpage(&e) ) - return GUEST_TABLE_SUPER_PAGE; - -- mfn = e.mfn; - unmap_domain_page(*table); -- *table = map_domain_page(_mfn(mfn)); -+ *table = next ?: map_domain_page(_mfn(e.mfn)); - *gfn_remainder &= (1UL << shift) - 1; - return GUEST_TABLE_NORMAL_PAGE; - } diff --git a/system/xen/xsa/xsa328-4.13-2.patch b/system/xen/xsa/xsa328-4.13-2.patch deleted file mode 100644 index c4f437f625ac1..0000000000000 --- a/system/xen/xsa/xsa328-4.13-2.patch +++ /dev/null @@ -1,48 +0,0 @@ -From: <security@xenproject.org> -Subject: x86/ept: atomically modify entries in ept_next_level - -ept_next_level was passing a live PTE pointer to ept_set_middle_entry, -which was then modified without taking into account that the PTE could -be part of a live EPT table. This wasn't a security issue because the -pages returned by p2m_alloc_ptp are zeroed, so adding such an entry -before actually initializing it didn't allow a guest to access -physical memory addresses it wasn't supposed to access. - -This is part of XSA-328. - -Reviewed-by: Jan Beulich <jbeulich@suse.com> - ---- a/xen/arch/x86/mm/p2m-ept.c -+++ b/xen/arch/x86/mm/p2m-ept.c -@@ -307,6 +307,8 @@ static int ept_next_level(struct p2m_dom - ept_entry_t *ept_entry, *next = NULL, e; - u32 shift, index; - -+ ASSERT(next_level); -+ - shift = next_level * EPT_TABLE_ORDER; - - index = *gfn_remainder >> shift; -@@ -323,16 +325,20 @@ static int ept_next_level(struct p2m_dom - - if ( !is_epte_present(&e) ) - { -+ int rc; -+ - if ( e.sa_p2mt == p2m_populate_on_demand ) - return GUEST_TABLE_POD_PAGE; - - if ( read_only ) - return GUEST_TABLE_MAP_FAILED; - -- next = ept_set_middle_entry(p2m, ept_entry); -+ next = ept_set_middle_entry(p2m, &e); - if ( !next ) - return GUEST_TABLE_MAP_FAILED; -- /* e is now stale and hence may not be used anymore below. */ -+ -+ rc = atomic_write_ept_entry(p2m, ept_entry, e, next_level); -+ ASSERT(rc == 0); - } - /* The only time sp would be set here is if we had hit a superpage */ - else if ( is_epte_superpage(&e) ) diff --git a/system/xen/xsa/xsa328-post-xsa321-4.13-1.patch b/system/xen/xsa/xsa328-post-xsa321-4.13-1.patch deleted file mode 100644 index 9a08ab240e014..0000000000000 --- a/system/xen/xsa/xsa328-post-xsa321-4.13-1.patch +++ /dev/null @@ -1,31 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: vtd: improve IOMMU TLB flush - -Do not limit PSI flushes to order 0 pages, in order to avoid doing a -full TLB flush if the passed in page has an order greater than 0 and -is aligned. Should increase the performance of IOMMU TLB flushes when -dealing with page orders greater than 0. - -This is part of XSA-321. - -Signed-off-by: Jan Beulich <jbeulich@suse.com> - ---- a/xen/drivers/passthrough/vtd/iommu.c -+++ b/xen/drivers/passthrough/vtd/iommu.c -@@ -570,13 +570,14 @@ static int __must_check iommu_flush_iotl - if ( iommu_domid == -1 ) - continue; - -- if ( page_count != 1 || dfn_eq(dfn, INVALID_DFN) ) -+ if ( !page_count || (page_count & (page_count - 1)) || -+ dfn_eq(dfn, INVALID_DFN) || !IS_ALIGNED(dfn_x(dfn), page_count) ) - rc = iommu_flush_iotlb_dsi(iommu, iommu_domid, - 0, flush_dev_iotlb); - else - rc = iommu_flush_iotlb_psi(iommu, iommu_domid, - dfn_to_daddr(dfn), -- PAGE_ORDER_4K, -+ get_order_from_pages(page_count), - !dma_old_pte_present, - flush_dev_iotlb); - diff --git a/system/xen/xsa/xsa328-post-xsa321-4.13-2.patch b/system/xen/xsa/xsa328-post-xsa321-4.13-2.patch deleted file mode 100644 index 1e48615f2b8da..0000000000000 --- a/system/xen/xsa/xsa328-post-xsa321-4.13-2.patch +++ /dev/null @@ -1,175 +0,0 @@ -From: <security@xenproject.org> -Subject: vtd: prune (and rename) cache flush functions - -Rename __iommu_flush_cache to iommu_sync_cache and remove -iommu_flush_cache_page. Also remove the iommu_flush_cache_entry -wrapper and just use iommu_sync_cache instead. Note the _entry suffix -was meaningless as the wrapper was already taking a size parameter in -bytes. While there also constify the addr parameter. - -No functional change intended. - -This is part of XSA-321. - -Reviewed-by: Jan Beulich <jbeulich@suse.com> - ---- a/xen/drivers/passthrough/vtd/extern.h -+++ b/xen/drivers/passthrough/vtd/extern.h -@@ -43,8 +43,7 @@ void disable_qinval(struct vtd_iommu *io - int enable_intremap(struct vtd_iommu *iommu, int eim); - void disable_intremap(struct vtd_iommu *iommu); - --void iommu_flush_cache_entry(void *addr, unsigned int size); --void iommu_flush_cache_page(void *addr, unsigned long npages); -+void iommu_sync_cache(const void *addr, unsigned int size); - int iommu_alloc(struct acpi_drhd_unit *drhd); - void iommu_free(struct acpi_drhd_unit *drhd); - ---- a/xen/drivers/passthrough/vtd/intremap.c -+++ b/xen/drivers/passthrough/vtd/intremap.c -@@ -230,7 +230,7 @@ static void free_remap_entry(struct vtd_ - iremap_entries, iremap_entry); - - update_irte(iommu, iremap_entry, &new_ire, false); -- iommu_flush_cache_entry(iremap_entry, sizeof(*iremap_entry)); -+ iommu_sync_cache(iremap_entry, sizeof(*iremap_entry)); - iommu_flush_iec_index(iommu, 0, index); - - unmap_vtd_domain_page(iremap_entries); -@@ -406,7 +406,7 @@ static int ioapic_rte_to_remap_entry(str - } - - update_irte(iommu, iremap_entry, &new_ire, !init); -- iommu_flush_cache_entry(iremap_entry, sizeof(*iremap_entry)); -+ iommu_sync_cache(iremap_entry, sizeof(*iremap_entry)); - iommu_flush_iec_index(iommu, 0, index); - - unmap_vtd_domain_page(iremap_entries); -@@ -695,7 +695,7 @@ static int msi_msg_to_remap_entry( - update_irte(iommu, iremap_entry, &new_ire, msi_desc->irte_initialized); - msi_desc->irte_initialized = true; - -- iommu_flush_cache_entry(iremap_entry, sizeof(*iremap_entry)); -+ iommu_sync_cache(iremap_entry, sizeof(*iremap_entry)); - iommu_flush_iec_index(iommu, 0, index); - - unmap_vtd_domain_page(iremap_entries); ---- a/xen/drivers/passthrough/vtd/iommu.c -+++ b/xen/drivers/passthrough/vtd/iommu.c -@@ -140,7 +140,8 @@ static int context_get_domain_id(struct - } - - static int iommus_incoherent; --static void __iommu_flush_cache(void *addr, unsigned int size) -+ -+void iommu_sync_cache(const void *addr, unsigned int size) - { - int i; - static unsigned int clflush_size = 0; -@@ -155,16 +156,6 @@ static void __iommu_flush_cache(void *ad - cacheline_flush((char *)addr + i); - } - --void iommu_flush_cache_entry(void *addr, unsigned int size) --{ -- __iommu_flush_cache(addr, size); --} -- --void iommu_flush_cache_page(void *addr, unsigned long npages) --{ -- __iommu_flush_cache(addr, PAGE_SIZE * npages); --} -- - /* Allocate page table, return its machine address */ - uint64_t alloc_pgtable_maddr(unsigned long npages, nodeid_t node) - { -@@ -183,7 +174,7 @@ uint64_t alloc_pgtable_maddr(unsigned lo - vaddr = __map_domain_page(cur_pg); - memset(vaddr, 0, PAGE_SIZE); - -- iommu_flush_cache_page(vaddr, 1); -+ iommu_sync_cache(vaddr, PAGE_SIZE); - unmap_domain_page(vaddr); - cur_pg++; - } -@@ -216,7 +207,7 @@ static u64 bus_to_context_maddr(struct v - } - set_root_value(*root, maddr); - set_root_present(*root); -- iommu_flush_cache_entry(root, sizeof(struct root_entry)); -+ iommu_sync_cache(root, sizeof(struct root_entry)); - } - maddr = (u64) get_context_addr(*root); - unmap_vtd_domain_page(root_entries); -@@ -263,7 +254,7 @@ static u64 addr_to_dma_page_maddr(struct - */ - dma_set_pte_readable(*pte); - dma_set_pte_writable(*pte); -- iommu_flush_cache_entry(pte, sizeof(struct dma_pte)); -+ iommu_sync_cache(pte, sizeof(struct dma_pte)); - } - - if ( level == 2 ) -@@ -640,7 +631,7 @@ static int __must_check dma_pte_clear_on - *flush_flags |= IOMMU_FLUSHF_modified; - - spin_unlock(&hd->arch.mapping_lock); -- iommu_flush_cache_entry(pte, sizeof(struct dma_pte)); -+ iommu_sync_cache(pte, sizeof(struct dma_pte)); - - unmap_vtd_domain_page(page); - -@@ -679,7 +670,7 @@ static void iommu_free_page_table(struct - iommu_free_pagetable(dma_pte_addr(*pte), next_level); - - dma_clear_pte(*pte); -- iommu_flush_cache_entry(pte, sizeof(struct dma_pte)); -+ iommu_sync_cache(pte, sizeof(struct dma_pte)); - } - - unmap_vtd_domain_page(pt_vaddr); -@@ -1400,7 +1391,7 @@ int domain_context_mapping_one( - context_set_address_width(*context, agaw); - context_set_fault_enable(*context); - context_set_present(*context); -- iommu_flush_cache_entry(context, sizeof(struct context_entry)); -+ iommu_sync_cache(context, sizeof(struct context_entry)); - spin_unlock(&iommu->lock); - - /* Context entry was previously non-present (with domid 0). */ -@@ -1564,7 +1555,7 @@ int domain_context_unmap_one( - - context_clear_present(*context); - context_clear_entry(*context); -- iommu_flush_cache_entry(context, sizeof(struct context_entry)); -+ iommu_sync_cache(context, sizeof(struct context_entry)); - - iommu_domid= domain_iommu_domid(domain, iommu); - if ( iommu_domid == -1 ) -@@ -1791,7 +1782,7 @@ static int __must_check intel_iommu_map_ - - *pte = new; - -- iommu_flush_cache_entry(pte, sizeof(struct dma_pte)); -+ iommu_sync_cache(pte, sizeof(struct dma_pte)); - spin_unlock(&hd->arch.mapping_lock); - unmap_vtd_domain_page(page); - -@@ -1866,7 +1857,7 @@ int iommu_pte_flush(struct domain *d, ui - int iommu_domid; - int rc = 0; - -- iommu_flush_cache_entry(pte, sizeof(struct dma_pte)); -+ iommu_sync_cache(pte, sizeof(struct dma_pte)); - - for_each_drhd_unit ( drhd ) - { -@@ -2724,7 +2715,7 @@ static int __init intel_iommu_quarantine - dma_set_pte_addr(*pte, maddr); - dma_set_pte_readable(*pte); - } -- iommu_flush_cache_page(parent, 1); -+ iommu_sync_cache(parent, PAGE_SIZE); - - unmap_vtd_domain_page(parent); - parent = map_vtd_domain_page(maddr); diff --git a/system/xen/xsa/xsa328-post-xsa321-4.13-3.patch b/system/xen/xsa/xsa328-post-xsa321-4.13-3.patch deleted file mode 100644 index c141c4b785003..0000000000000 --- a/system/xen/xsa/xsa328-post-xsa321-4.13-3.patch +++ /dev/null @@ -1,82 +0,0 @@ -From: <security@xenproject.org> -Subject: x86/iommu: introduce a cache sync hook - -The hook is only implemented for VT-d and it uses the already existing -iommu_sync_cache function present in VT-d code. The new hook is -added so that the cache can be flushed by code outside of VT-d when -using shared page tables. - -Note that alloc_pgtable_maddr must use the now locally defined -sync_cache function, because IOMMU ops are not yet setup the first -time the function gets called during IOMMU initialization. - -No functional change intended. - -This is part of XSA-321. - -Reviewed-by: Jan Beulich <jbeulich@suse.com> - ---- a/xen/drivers/passthrough/vtd/extern.h -+++ b/xen/drivers/passthrough/vtd/extern.h -@@ -43,7 +43,6 @@ void disable_qinval(struct vtd_iommu *io - int enable_intremap(struct vtd_iommu *iommu, int eim); - void disable_intremap(struct vtd_iommu *iommu); - --void iommu_sync_cache(const void *addr, unsigned int size); - int iommu_alloc(struct acpi_drhd_unit *drhd); - void iommu_free(struct acpi_drhd_unit *drhd); - ---- a/xen/drivers/passthrough/vtd/iommu.c -+++ b/xen/drivers/passthrough/vtd/iommu.c -@@ -141,7 +141,7 @@ static int context_get_domain_id(struct - - static int iommus_incoherent; - --void iommu_sync_cache(const void *addr, unsigned int size) -+static void sync_cache(const void *addr, unsigned int size) - { - int i; - static unsigned int clflush_size = 0; -@@ -174,7 +174,7 @@ uint64_t alloc_pgtable_maddr(unsigned lo - vaddr = __map_domain_page(cur_pg); - memset(vaddr, 0, PAGE_SIZE); - -- iommu_sync_cache(vaddr, PAGE_SIZE); -+ sync_cache(vaddr, PAGE_SIZE); - unmap_domain_page(vaddr); - cur_pg++; - } -@@ -2763,6 +2763,7 @@ const struct iommu_ops __initconstrel in - .iotlb_flush_all = iommu_flush_iotlb_all, - .get_reserved_device_memory = intel_iommu_get_reserved_device_memory, - .dump_p2m_table = vtd_dump_p2m_table, -+ .sync_cache = sync_cache, - }; - - const struct iommu_init_ops __initconstrel intel_iommu_init_ops = { ---- a/xen/include/asm-x86/iommu.h -+++ b/xen/include/asm-x86/iommu.h -@@ -121,6 +121,13 @@ extern bool untrusted_msi; - int pi_update_irte(const struct pi_desc *pi_desc, const struct pirq *pirq, - const uint8_t gvec); - -+#define iommu_sync_cache(addr, size) ({ \ -+ const struct iommu_ops *ops = iommu_get_ops(); \ -+ \ -+ if ( ops->sync_cache ) \ -+ iommu_vcall(ops, sync_cache, addr, size); \ -+}) -+ - #endif /* !__ARCH_X86_IOMMU_H__ */ - /* - * Local variables: ---- a/xen/include/xen/iommu.h -+++ b/xen/include/xen/iommu.h -@@ -250,6 +250,7 @@ struct iommu_ops { - int (*setup_hpet_msi)(struct msi_desc *); - - int (*adjust_irq_affinities)(void); -+ void (*sync_cache)(const void *addr, unsigned int size); - #endif /* CONFIG_X86 */ - - int __must_check (*suspend)(void); diff --git a/system/xen/xsa/xsa328-post-xsa321-4.13-4.patch b/system/xen/xsa/xsa328-post-xsa321-4.13-4.patch deleted file mode 100644 index 62bbcc7271cb1..0000000000000 --- a/system/xen/xsa/xsa328-post-xsa321-4.13-4.patch +++ /dev/null @@ -1,36 +0,0 @@ -From: <security@xenproject.org> -Subject: vtd: don't assume addresses are aligned in sync_cache - -Current code in sync_cache assume that the address passed in is -aligned to a cache line size. Fix the code to support passing in -arbitrary addresses not necessarily aligned to a cache line size. - -This is part of XSA-321. - -Reviewed-by: Jan Beulich <jbeulich@suse.com> - ---- a/xen/drivers/passthrough/vtd/iommu.c -+++ b/xen/drivers/passthrough/vtd/iommu.c -@@ -143,8 +143,8 @@ static int iommus_incoherent; - - static void sync_cache(const void *addr, unsigned int size) - { -- int i; -- static unsigned int clflush_size = 0; -+ static unsigned long clflush_size = 0; -+ const void *end = addr + size; - - if ( !iommus_incoherent ) - return; -@@ -152,8 +152,9 @@ static void sync_cache(const void *addr, - if ( clflush_size == 0 ) - clflush_size = get_cache_line_size(); - -- for ( i = 0; i < size; i += clflush_size ) -- cacheline_flush((char *)addr + i); -+ addr -= (unsigned long)addr & (clflush_size - 1); -+ for ( ; addr < end; addr += clflush_size ) -+ cacheline_flush((char *)addr); - } - - /* Allocate page table, return its machine address */ diff --git a/system/xen/xsa/xsa328-post-xsa321-4.13-5.patch b/system/xen/xsa/xsa328-post-xsa321-4.13-5.patch deleted file mode 100644 index 60cfe6ccdf0d0..0000000000000 --- a/system/xen/xsa/xsa328-post-xsa321-4.13-5.patch +++ /dev/null @@ -1,24 +0,0 @@ -From: <security@xenproject.org> -Subject: x86/alternative: introduce alternative_2 - -It's based on alternative_io_2 without inputs or outputs but with an -added memory clobber. - -This is part of XSA-321. - -Acked-by: Jan Beulich <jbeulich@suse.com> - ---- a/xen/include/asm-x86/alternative.h -+++ b/xen/include/asm-x86/alternative.h -@@ -114,6 +114,11 @@ extern void alternative_branches(void); - #define alternative(oldinstr, newinstr, feature) \ - asm volatile (ALTERNATIVE(oldinstr, newinstr, feature) : : : "memory") - -+#define alternative_2(oldinstr, newinstr1, feature1, newinstr2, feature2) \ -+ asm volatile (ALTERNATIVE_2(oldinstr, newinstr1, feature1, \ -+ newinstr2, feature2) \ -+ : : : "memory") -+ - /* - * Alternative inline assembly with input. - * diff --git a/system/xen/xsa/xsa328-post-xsa321-4.13-6.patch b/system/xen/xsa/xsa328-post-xsa321-4.13-6.patch deleted file mode 100644 index 4c5c5ab0ba082..0000000000000 --- a/system/xen/xsa/xsa328-post-xsa321-4.13-6.patch +++ /dev/null @@ -1,91 +0,0 @@ -From: <security@xenproject.org> -Subject: vtd: optimize CPU cache sync - -Some VT-d IOMMUs are non-coherent, which requires a cache write back -in order for the changes made by the CPU to be visible to the IOMMU. -This cache write back was unconditionally done using clflush, but there are -other more efficient instructions to do so, hence implement support -for them using the alternative framework. - -This is part of XSA-321. - -Reviewed-by: Jan Beulich <jbeulich@suse.com> - ---- a/xen/drivers/passthrough/vtd/extern.h -+++ b/xen/drivers/passthrough/vtd/extern.h -@@ -68,7 +68,6 @@ int __must_check qinval_device_iotlb_syn - u16 did, u16 size, u64 addr); - - unsigned int get_cache_line_size(void); --void cacheline_flush(char *); - void flush_all_cache(void); - - uint64_t alloc_pgtable_maddr(unsigned long npages, nodeid_t node); ---- a/xen/drivers/passthrough/vtd/iommu.c -+++ b/xen/drivers/passthrough/vtd/iommu.c -@@ -31,6 +31,7 @@ - #include <xen/pci_regs.h> - #include <xen/keyhandler.h> - #include <asm/msi.h> -+#include <asm/nops.h> - #include <asm/irq.h> - #include <asm/hvm/vmx/vmx.h> - #include <asm/p2m.h> -@@ -154,7 +155,42 @@ static void sync_cache(const void *addr, - - addr -= (unsigned long)addr & (clflush_size - 1); - for ( ; addr < end; addr += clflush_size ) -- cacheline_flush((char *)addr); -+/* -+ * The arguments to a macro must not include preprocessor directives. Doing so -+ * results in undefined behavior, so we have to create some defines here in -+ * order to avoid it. -+ */ -+#if defined(HAVE_AS_CLWB) -+# define CLWB_ENCODING "clwb %[p]" -+#elif defined(HAVE_AS_XSAVEOPT) -+# define CLWB_ENCODING "data16 xsaveopt %[p]" /* clwb */ -+#else -+# define CLWB_ENCODING ".byte 0x66, 0x0f, 0xae, 0x30" /* clwb (%%rax) */ -+#endif -+ -+#define BASE_INPUT(addr) [p] "m" (*(const char *)(addr)) -+#if defined(HAVE_AS_CLWB) || defined(HAVE_AS_XSAVEOPT) -+# define INPUT BASE_INPUT -+#else -+# define INPUT(addr) "a" (addr), BASE_INPUT(addr) -+#endif -+ /* -+ * Note regarding the use of NOP_DS_PREFIX: it's faster to do a clflush -+ * + prefix than a clflush + nop, and hence the prefix is added instead -+ * of letting the alternative framework fill the gap by appending nops. -+ */ -+ alternative_io_2(".byte " __stringify(NOP_DS_PREFIX) "; clflush %[p]", -+ "data16 clflush %[p]", /* clflushopt */ -+ X86_FEATURE_CLFLUSHOPT, -+ CLWB_ENCODING, -+ X86_FEATURE_CLWB, /* no outputs */, -+ INPUT(addr)); -+#undef INPUT -+#undef BASE_INPUT -+#undef CLWB_ENCODING -+ -+ alternative_2("", "sfence", X86_FEATURE_CLFLUSHOPT, -+ "sfence", X86_FEATURE_CLWB); - } - - /* Allocate page table, return its machine address */ ---- a/xen/drivers/passthrough/vtd/x86/vtd.c -+++ b/xen/drivers/passthrough/vtd/x86/vtd.c -@@ -51,11 +51,6 @@ unsigned int get_cache_line_size(void) - return ((cpuid_ebx(1) >> 8) & 0xff) * 8; - } - --void cacheline_flush(char * addr) --{ -- clflush(addr); --} -- - void flush_all_cache() - { - wbinvd(); diff --git a/system/xen/xsa/xsa328-post-xsa321-4.13-7.patch b/system/xen/xsa/xsa328-post-xsa321-4.13-7.patch deleted file mode 100644 index 0bd018f972e79..0000000000000 --- a/system/xen/xsa/xsa328-post-xsa321-4.13-7.patch +++ /dev/null @@ -1,153 +0,0 @@ -From: <security@xenproject.org> -Subject: x86/ept: flush cache when modifying PTEs and sharing page tables - -Modifications made to the page tables by EPT code need to be written -to memory when the page tables are shared with the IOMMU, as Intel -IOMMUs can be non-coherent and thus require changes to be written to -memory in order to be visible to the IOMMU. - -In order to achieve this make sure data is written back to memory -after writing an EPT entry when the recalc bit is not set in -atomic_write_ept_entry. If such bit is set, the entry will be -adjusted and atomic_write_ept_entry will be called a second time -without the recalc bit set. Note that when splitting a super page the -new tables resulting of the split should also be written back. - -Failure to do so can allow devices behind the IOMMU access to the -stale super page, or cause coherency issues as changes made by the -processor to the page tables are not visible to the IOMMU. - -This allows to remove the VT-d specific iommu_pte_flush helper, since -the cache write back is now performed by atomic_write_ept_entry, and -hence iommu_iotlb_flush can be used to flush the IOMMU TLB. The newly -used method (iommu_iotlb_flush) can result in less flushes, since it -might sometimes be called rightly with 0 flags, in which case it -becomes a no-op. - -This is part of XSA-321. - -Reviewed-by: Jan Beulich <jbeulich@suse.com> - ---- a/xen/arch/x86/mm/p2m-ept.c -+++ b/xen/arch/x86/mm/p2m-ept.c -@@ -58,6 +58,19 @@ static int atomic_write_ept_entry(struct - - write_atomic(&entryptr->epte, new.epte); - -+ /* -+ * The recalc field on the EPT is used to signal either that a -+ * recalculation of the EMT field is required (which doesn't effect the -+ * IOMMU), or a type change. Type changes can only be between ram_rw, -+ * logdirty and ioreq_server: changes to/from logdirty won't work well with -+ * an IOMMU anyway, as IOMMU #PFs are not synchronous and will lead to -+ * aborts, and changes to/from ioreq_server are already fully flushed -+ * before returning to guest context (see -+ * XEN_DMOP_map_mem_type_to_ioreq_server). -+ */ -+ if ( !new.recalc && iommu_use_hap_pt(p2m->domain) ) -+ iommu_sync_cache(entryptr, sizeof(*entryptr)); -+ - return 0; - } - -@@ -278,6 +291,9 @@ static bool_t ept_split_super_page(struc - break; - } - -+ if ( iommu_use_hap_pt(p2m->domain) ) -+ iommu_sync_cache(table, EPT_PAGETABLE_ENTRIES * sizeof(ept_entry_t)); -+ - unmap_domain_page(table); - - /* Even failed we should install the newly allocated ept page. */ -@@ -337,6 +353,9 @@ static int ept_next_level(struct p2m_dom - if ( !next ) - return GUEST_TABLE_MAP_FAILED; - -+ if ( iommu_use_hap_pt(p2m->domain) ) -+ iommu_sync_cache(next, EPT_PAGETABLE_ENTRIES * sizeof(ept_entry_t)); -+ - rc = atomic_write_ept_entry(p2m, ept_entry, e, next_level); - ASSERT(rc == 0); - } -@@ -821,7 +840,10 @@ out: - need_modify_vtd_table ) - { - if ( iommu_use_hap_pt(d) ) -- rc = iommu_pte_flush(d, gfn, &ept_entry->epte, order, vtd_pte_present); -+ rc = iommu_iotlb_flush(d, _dfn(gfn), (1u << order), -+ (iommu_flags ? IOMMU_FLUSHF_added : 0) | -+ (vtd_pte_present ? IOMMU_FLUSHF_modified -+ : 0)); - else if ( need_iommu_pt_sync(d) ) - rc = iommu_flags ? - iommu_legacy_map(d, _dfn(gfn), mfn, order, iommu_flags) : ---- a/xen/drivers/passthrough/vtd/iommu.c -+++ b/xen/drivers/passthrough/vtd/iommu.c -@@ -1884,53 +1884,6 @@ static int intel_iommu_lookup_page(struc - return 0; - } - --int iommu_pte_flush(struct domain *d, uint64_t dfn, uint64_t *pte, -- int order, int present) --{ -- struct acpi_drhd_unit *drhd; -- struct vtd_iommu *iommu = NULL; -- struct domain_iommu *hd = dom_iommu(d); -- bool_t flush_dev_iotlb; -- int iommu_domid; -- int rc = 0; -- -- iommu_sync_cache(pte, sizeof(struct dma_pte)); -- -- for_each_drhd_unit ( drhd ) -- { -- iommu = drhd->iommu; -- if ( !test_bit(iommu->index, &hd->arch.iommu_bitmap) ) -- continue; -- -- flush_dev_iotlb = !!find_ats_dev_drhd(iommu); -- iommu_domid= domain_iommu_domid(d, iommu); -- if ( iommu_domid == -1 ) -- continue; -- -- rc = iommu_flush_iotlb_psi(iommu, iommu_domid, -- __dfn_to_daddr(dfn), -- order, !present, flush_dev_iotlb); -- if ( rc > 0 ) -- { -- iommu_flush_write_buffer(iommu); -- rc = 0; -- } -- } -- -- if ( unlikely(rc) ) -- { -- if ( !d->is_shutting_down && printk_ratelimit() ) -- printk(XENLOG_ERR VTDPREFIX -- " d%d: IOMMU pages flush failed: %d\n", -- d->domain_id, rc); -- -- if ( !is_hardware_domain(d) ) -- domain_crash(d); -- } -- -- return rc; --} -- - static int __init vtd_ept_page_compatible(struct vtd_iommu *iommu) - { - u64 ept_cap, vtd_cap = iommu->cap; ---- a/xen/include/asm-x86/iommu.h -+++ b/xen/include/asm-x86/iommu.h -@@ -97,10 +97,6 @@ static inline int iommu_adjust_irq_affin - : 0; - } - --/* While VT-d specific, this must get declared in a generic header. */ --int __must_check iommu_pte_flush(struct domain *d, u64 gfn, u64 *pte, -- int order, int present); -- - static inline bool iommu_supports_x2apic(void) - { - return iommu_init_ops && iommu_init_ops->supports_x2apic diff --git a/system/xen/xsa/xsa333.patch b/system/xen/xsa/xsa333.patch deleted file mode 100644 index 6b86c942faa07..0000000000000 --- a/system/xen/xsa/xsa333.patch +++ /dev/null @@ -1,39 +0,0 @@ -From: Andrew Cooper <andrew.cooper3@citrix.com> -Subject: x86/pv: Handle the Intel-specific MSR_MISC_ENABLE correctly - -This MSR doesn't exist on AMD hardware, and switching away from the safe -functions in the common MSR path was an erroneous change. - -Partially revert the change. - -This is XSA-333. - -Fixes: 4fdc932b3cc ("x86/Intel: drop another 32-bit leftover") -Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> -Reviewed-by: Jan Beulich <jbeulich@suse.com> -Reviewed-by: Wei Liu <wl@xen.org> - -diff --git a/xen/arch/x86/pv/emul-priv-op.c b/xen/arch/x86/pv/emul-priv-op.c -index efeb2a727e..6332c74b80 100644 ---- a/xen/arch/x86/pv/emul-priv-op.c -+++ b/xen/arch/x86/pv/emul-priv-op.c -@@ -924,7 +924,8 @@ static int read_msr(unsigned int reg, uint64_t *val, - return X86EMUL_OKAY; - - case MSR_IA32_MISC_ENABLE: -- rdmsrl(reg, *val); -+ if ( rdmsr_safe(reg, *val) ) -+ break; - *val = guest_misc_enable(*val); - return X86EMUL_OKAY; - -@@ -1059,7 +1060,8 @@ static int write_msr(unsigned int reg, uint64_t val, - break; - - case MSR_IA32_MISC_ENABLE: -- rdmsrl(reg, temp); -+ if ( rdmsr_safe(reg, temp) ) -+ break; - if ( val != guest_misc_enable(temp) ) - goto invalid; - return X86EMUL_OKAY; diff --git a/system/xen/xsa/xsa334.patch b/system/xen/xsa/xsa334.patch deleted file mode 100644 index 4260cdb2b2db8..0000000000000 --- a/system/xen/xsa/xsa334.patch +++ /dev/null @@ -1,51 +0,0 @@ -From: Andrew Cooper <andrew.cooper3@citrix.com> -Subject: xen/memory: Don't skip the RCU unlock path in acquire_resource() - -In the case that an HVM Stubdomain makes an XENMEM_acquire_resource hypercall, -the FIXME path will bypass rcu_unlock_domain() on the way out of the function. - -Move the check to the start of the function. This does change the behaviour -of the get-size path for HVM Stubdomains, but that functionality is currently -broken and unused anyway, as well as being quite useless to entities which -can't actually map the resource anyway. - -This is XSA-334. - -Fixes: 83fa6552ce ("common: add a new mappable resource type: XENMEM_resource_grant_table") -Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> -Reviewed-by: Jan Beulich <jbeulich@suse.com> - -diff --git a/xen/common/memory.c b/xen/common/memory.c -index 1a3c9ffb30..29741d8904 100644 ---- a/xen/common/memory.c -+++ b/xen/common/memory.c -@@ -1058,6 +1058,14 @@ static int acquire_resource( - xen_pfn_t mfn_list[32]; - int rc; - -+ /* -+ * FIXME: Until foreign pages inserted into the P2M are properly -+ * reference counted, it is unsafe to allow mapping of -+ * resource pages unless the caller is the hardware domain. -+ */ -+ if ( paging_mode_translate(currd) && !is_hardware_domain(currd) ) -+ return -EACCES; -+ - if ( copy_from_guest(&xmar, arg, 1) ) - return -EFAULT; - -@@ -1114,14 +1122,6 @@ static int acquire_resource( - xen_pfn_t gfn_list[ARRAY_SIZE(mfn_list)]; - unsigned int i; - -- /* -- * FIXME: Until foreign pages inserted into the P2M are properly -- * reference counted, it is unsafe to allow mapping of -- * resource pages unless the caller is the hardware domain. -- */ -- if ( !is_hardware_domain(currd) ) -- return -EACCES; -- - if ( copy_from_guest(gfn_list, xmar.frame_list, xmar.nr_frames) ) - rc = -EFAULT; - diff --git a/system/xen/xsa/xsa335-qemu.patch b/system/xen/xsa/xsa335-qemu.patch deleted file mode 100644 index 5617502359adf..0000000000000 --- a/system/xen/xsa/xsa335-qemu.patch +++ /dev/null @@ -1,84 +0,0 @@ -From c5bd2924c6d6a5bcbffb8b5e7798a88970131c07 Mon Sep 17 00:00:00 2001 -From: Gerd Hoffmann <kraxel@redhat.com> -Date: Mon, 17 Aug 2020 08:34:22 +0200 -Subject: [PATCH] usb: fix setup_len init (CVE-2020-14364) - -Store calculated setup_len in a local variable, verify it, and only -write it to the struct (USBDevice->setup_len) in case it passed the -sanity checks. - -This prevents other code (do_token_{in,out} functions specifically) -from working with invalid USBDevice->setup_len values and overrunning -the USBDevice->setup_buf[] buffer. - -Fixes: CVE-2020-14364 -Signed-off-by: Gerd Hoffmann <kraxel@redhat.com> ---- - hw/usb/core.c | 16 ++++++++++------ - 1 file changed, 10 insertions(+), 6 deletions(-) - -diff --git a/hw/usb/core.c b/hw/usb/core.c -index 5abd128b6bc5..5234dcc73fea 100644 ---- a/hw/usb/core.c -+++ b/hw/usb/core.c -@@ -129,6 +129,7 @@ void usb_wakeup(USBEndpoint *ep, unsigned int stream) - static void do_token_setup(USBDevice *s, USBPacket *p) - { - int request, value, index; -+ unsigned int setup_len; - - if (p->iov.size != 8) { - p->status = USB_RET_STALL; -@@ -138,14 +139,15 @@ static void do_token_setup(USBDevice *s, USBPacket *p) - usb_packet_copy(p, s->setup_buf, p->iov.size); - s->setup_index = 0; - p->actual_length = 0; -- s->setup_len = (s->setup_buf[7] << 8) | s->setup_buf[6]; -- if (s->setup_len > sizeof(s->data_buf)) { -+ setup_len = (s->setup_buf[7] << 8) | s->setup_buf[6]; -+ if (setup_len > sizeof(s->data_buf)) { - fprintf(stderr, - "usb_generic_handle_packet: ctrl buffer too small (%d > %zu)\n", -- s->setup_len, sizeof(s->data_buf)); -+ setup_len, sizeof(s->data_buf)); - p->status = USB_RET_STALL; - return; - } -+ s->setup_len = setup_len; - - request = (s->setup_buf[0] << 8) | s->setup_buf[1]; - value = (s->setup_buf[3] << 8) | s->setup_buf[2]; -@@ -259,26 +261,28 @@ static void do_token_out(USBDevice *s, USBPacket *p) - static void do_parameter(USBDevice *s, USBPacket *p) - { - int i, request, value, index; -+ unsigned int setup_len; - - for (i = 0; i < 8; i++) { - s->setup_buf[i] = p->parameter >> (i*8); - } - - s->setup_state = SETUP_STATE_PARAM; -- s->setup_len = (s->setup_buf[7] << 8) | s->setup_buf[6]; - s->setup_index = 0; - - request = (s->setup_buf[0] << 8) | s->setup_buf[1]; - value = (s->setup_buf[3] << 8) | s->setup_buf[2]; - index = (s->setup_buf[5] << 8) | s->setup_buf[4]; - -- if (s->setup_len > sizeof(s->data_buf)) { -+ setup_len = (s->setup_buf[7] << 8) | s->setup_buf[6]; -+ if (setup_len > sizeof(s->data_buf)) { - fprintf(stderr, - "usb_generic_handle_packet: ctrl buffer too small (%d > %zu)\n", -- s->setup_len, sizeof(s->data_buf)); -+ setup_len, sizeof(s->data_buf)); - p->status = USB_RET_STALL; - return; - } -+ s->setup_len = setup_len; - - if (p->pid == USB_TOKEN_OUT) { - usb_packet_copy(p, s->data_buf, s->setup_len); --- -2.18.4 diff --git a/system/xen/xsa/xsa336.patch b/system/xen/xsa/xsa336.patch deleted file mode 100644 index b44c298b70b70..0000000000000 --- a/system/xen/xsa/xsa336.patch +++ /dev/null @@ -1,283 +0,0 @@ -From: Roger Pau Monné <roger.pau@citrix.com> -Subject: x86/vpt: fix race when migrating timers between vCPUs - -The current vPT code will migrate the emulated timers between vCPUs -(change the pt->vcpu field) while just holding the destination lock, -either from create_periodic_time or pt_adjust_global_vcpu_target if -the global target is adjusted. Changing the periodic_timer vCPU field -in this way creates a race where a third party could grab the lock in -the unlocked region of pt_adjust_global_vcpu_target (or before -create_periodic_time performs the vcpu change) and then release the -lock from a different vCPU, creating a locking imbalance. - -Introduce a per-domain rwlock in order to protect periodic_time -migration between vCPU lists. Taking the lock in read mode prevents -any timer from being migrated to a different vCPU, while taking it in -write mode allows performing migration of timers across vCPUs. The -per-vcpu locks are still used to protect all the other fields from the -periodic_timer struct. - -Note that such migration shouldn't happen frequently, and hence -there's no performance drop as a result of such locking. - -This is XSA-336. - -Reported-by: Igor Druzhinin <igor.druzhinin@citrix.com> -Tested-by: Igor Druzhinin <igor.druzhinin@citrix.com> -Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> -Reviewed-by: Jan Beulich <jbeulich@suse.com> ---- -Changes since v2: - - Re-order pt_adjust_vcpu to remove one if. - - Fix pt_lock to not call pt_vcpu_lock, as we might end up using a - stale value of pt->vcpu when taking the per-vcpu lock. - -Changes since v1: - - Use a per-domain rwlock to protect timer vCPU migration. - ---- a/xen/arch/x86/hvm/hvm.c -+++ b/xen/arch/x86/hvm/hvm.c -@@ -658,6 +658,8 @@ int hvm_domain_initialise(struct domain - /* need link to containing domain */ - d->arch.hvm.pl_time->domain = d; - -+ rwlock_init(&d->arch.hvm.pl_time->pt_migrate); -+ - /* Set the default IO Bitmap. */ - if ( is_hardware_domain(d) ) - { ---- a/xen/arch/x86/hvm/vpt.c -+++ b/xen/arch/x86/hvm/vpt.c -@@ -153,23 +153,32 @@ static int pt_irq_masked(struct periodic - return 1; - } - --static void pt_lock(struct periodic_time *pt) -+static void pt_vcpu_lock(struct vcpu *v) - { -- struct vcpu *v; -+ read_lock(&v->domain->arch.hvm.pl_time->pt_migrate); -+ spin_lock(&v->arch.hvm.tm_lock); -+} - -- for ( ; ; ) -- { -- v = pt->vcpu; -- spin_lock(&v->arch.hvm.tm_lock); -- if ( likely(pt->vcpu == v) ) -- break; -- spin_unlock(&v->arch.hvm.tm_lock); -- } -+static void pt_vcpu_unlock(struct vcpu *v) -+{ -+ spin_unlock(&v->arch.hvm.tm_lock); -+ read_unlock(&v->domain->arch.hvm.pl_time->pt_migrate); -+} -+ -+static void pt_lock(struct periodic_time *pt) -+{ -+ /* -+ * We cannot use pt_vcpu_lock here, because we need to acquire the -+ * per-domain lock first and then (re-)fetch the value of pt->vcpu, or -+ * else we might be using a stale value of pt->vcpu. -+ */ -+ read_lock(&pt->vcpu->domain->arch.hvm.pl_time->pt_migrate); -+ spin_lock(&pt->vcpu->arch.hvm.tm_lock); - } - - static void pt_unlock(struct periodic_time *pt) - { -- spin_unlock(&pt->vcpu->arch.hvm.tm_lock); -+ pt_vcpu_unlock(pt->vcpu); - } - - static void pt_process_missed_ticks(struct periodic_time *pt) -@@ -219,7 +228,7 @@ void pt_save_timer(struct vcpu *v) - if ( v->pause_flags & VPF_blocked ) - return; - -- spin_lock(&v->arch.hvm.tm_lock); -+ pt_vcpu_lock(v); - - list_for_each_entry ( pt, head, list ) - if ( !pt->do_not_freeze ) -@@ -227,7 +236,7 @@ void pt_save_timer(struct vcpu *v) - - pt_freeze_time(v); - -- spin_unlock(&v->arch.hvm.tm_lock); -+ pt_vcpu_unlock(v); - } - - void pt_restore_timer(struct vcpu *v) -@@ -235,7 +244,7 @@ void pt_restore_timer(struct vcpu *v) - struct list_head *head = &v->arch.hvm.tm_list; - struct periodic_time *pt; - -- spin_lock(&v->arch.hvm.tm_lock); -+ pt_vcpu_lock(v); - - list_for_each_entry ( pt, head, list ) - { -@@ -248,7 +257,7 @@ void pt_restore_timer(struct vcpu *v) - - pt_thaw_time(v); - -- spin_unlock(&v->arch.hvm.tm_lock); -+ pt_vcpu_unlock(v); - } - - static void pt_timer_fn(void *data) -@@ -309,7 +318,7 @@ int pt_update_irq(struct vcpu *v) - int irq, pt_vector = -1; - bool level; - -- spin_lock(&v->arch.hvm.tm_lock); -+ pt_vcpu_lock(v); - - earliest_pt = NULL; - max_lag = -1ULL; -@@ -339,7 +348,7 @@ int pt_update_irq(struct vcpu *v) - - if ( earliest_pt == NULL ) - { -- spin_unlock(&v->arch.hvm.tm_lock); -+ pt_vcpu_unlock(v); - return -1; - } - -@@ -347,7 +356,7 @@ int pt_update_irq(struct vcpu *v) - irq = earliest_pt->irq; - level = earliest_pt->level; - -- spin_unlock(&v->arch.hvm.tm_lock); -+ pt_vcpu_unlock(v); - - switch ( earliest_pt->source ) - { -@@ -394,7 +403,7 @@ int pt_update_irq(struct vcpu *v) - time_cb *cb = NULL; - void *cb_priv; - -- spin_lock(&v->arch.hvm.tm_lock); -+ pt_vcpu_lock(v); - /* Make sure the timer is still on the list. */ - list_for_each_entry ( pt, &v->arch.hvm.tm_list, list ) - if ( pt == earliest_pt ) -@@ -404,7 +413,7 @@ int pt_update_irq(struct vcpu *v) - cb_priv = pt->priv; - break; - } -- spin_unlock(&v->arch.hvm.tm_lock); -+ pt_vcpu_unlock(v); - - if ( cb != NULL ) - cb(v, cb_priv); -@@ -441,12 +450,12 @@ void pt_intr_post(struct vcpu *v, struct - if ( intack.source == hvm_intsrc_vector ) - return; - -- spin_lock(&v->arch.hvm.tm_lock); -+ pt_vcpu_lock(v); - - pt = is_pt_irq(v, intack); - if ( pt == NULL ) - { -- spin_unlock(&v->arch.hvm.tm_lock); -+ pt_vcpu_unlock(v); - return; - } - -@@ -455,7 +464,7 @@ void pt_intr_post(struct vcpu *v, struct - cb = pt->cb; - cb_priv = pt->priv; - -- spin_unlock(&v->arch.hvm.tm_lock); -+ pt_vcpu_unlock(v); - - if ( cb != NULL ) - cb(v, cb_priv); -@@ -466,12 +475,12 @@ void pt_migrate(struct vcpu *v) - struct list_head *head = &v->arch.hvm.tm_list; - struct periodic_time *pt; - -- spin_lock(&v->arch.hvm.tm_lock); -+ pt_vcpu_lock(v); - - list_for_each_entry ( pt, head, list ) - migrate_timer(&pt->timer, v->processor); - -- spin_unlock(&v->arch.hvm.tm_lock); -+ pt_vcpu_unlock(v); - } - - void create_periodic_time( -@@ -490,7 +499,7 @@ void create_periodic_time( - - destroy_periodic_time(pt); - -- spin_lock(&v->arch.hvm.tm_lock); -+ write_lock(&v->domain->arch.hvm.pl_time->pt_migrate); - - pt->pending_intr_nr = 0; - pt->do_not_freeze = 0; -@@ -540,7 +549,7 @@ void create_periodic_time( - init_timer(&pt->timer, pt_timer_fn, pt, v->processor); - set_timer(&pt->timer, pt->scheduled); - -- spin_unlock(&v->arch.hvm.tm_lock); -+ write_unlock(&v->domain->arch.hvm.pl_time->pt_migrate); - } - - void destroy_periodic_time(struct periodic_time *pt) -@@ -565,30 +574,20 @@ void destroy_periodic_time(struct period - - static void pt_adjust_vcpu(struct periodic_time *pt, struct vcpu *v) - { -- int on_list; -- - ASSERT(pt->source == PTSRC_isa || pt->source == PTSRC_ioapic); - - if ( pt->vcpu == NULL ) - return; - -- pt_lock(pt); -- on_list = pt->on_list; -- if ( pt->on_list ) -- list_del(&pt->list); -- pt->on_list = 0; -- pt_unlock(pt); -- -- spin_lock(&v->arch.hvm.tm_lock); -+ write_lock(&pt->vcpu->domain->arch.hvm.pl_time->pt_migrate); - pt->vcpu = v; -- if ( on_list ) -+ if ( pt->on_list ) - { -- pt->on_list = 1; -+ list_del(&pt->list); - list_add(&pt->list, &v->arch.hvm.tm_list); -- - migrate_timer(&pt->timer, v->processor); - } -- spin_unlock(&v->arch.hvm.tm_lock); -+ write_unlock(&pt->vcpu->domain->arch.hvm.pl_time->pt_migrate); - } - - void pt_adjust_global_vcpu_target(struct vcpu *v) ---- a/xen/include/asm-x86/hvm/vpt.h -+++ b/xen/include/asm-x86/hvm/vpt.h -@@ -128,6 +128,13 @@ struct pl_time { /* platform time */ - struct RTCState vrtc; - struct HPETState vhpet; - struct PMTState vpmt; -+ /* -+ * rwlock to prevent periodic_time vCPU migration. Take the lock in read -+ * mode in order to prevent the vcpu field of periodic_time from changing. -+ * Lock must be taken in write mode when changes to the vcpu field are -+ * performed, as it allows exclusive access to all the timers of a domain. -+ */ -+ rwlock_t pt_migrate; - /* guest_time = Xen sys time + stime_offset */ - int64_t stime_offset; - /* Ensures monotonicity in appropriate timer modes. */ diff --git a/system/xen/xsa/xsa337-4.13-1.patch b/system/xen/xsa/xsa337-4.13-1.patch deleted file mode 100644 index 2091626f4f536..0000000000000 --- a/system/xen/xsa/xsa337-4.13-1.patch +++ /dev/null @@ -1,87 +0,0 @@ -From: Roger Pau Monné <roger.pau@citrix.com> -Subject: x86/msi: get rid of read_msi_msg - -It's safer and faster to just use the cached last written -(untranslated) MSI message stored in msi_desc for the single user that -calls read_msi_msg. - -This also prevents relying on the data read from the device MSI -registers in order to figure out the index into the IOMMU interrupt -remapping table, which is not safe. - -This is part of XSA-337. - -Reported-by: Andrew Cooper <andrew.cooper3@citrix.com> -Requested-by: Andrew Cooper <andrew.cooper3@citrix.com> -Signed-off-by: Roger Pau Monné <roger.pau@citrix.com> -Reviewed-by: Jan Beulich <jbeulich@suse.com> - ---- a/xen/arch/x86/msi.c -+++ b/xen/arch/x86/msi.c -@@ -183,54 +183,6 @@ void msi_compose_msg(unsigned vector, co - MSI_DATA_VECTOR(vector); - } - --static bool read_msi_msg(struct msi_desc *entry, struct msi_msg *msg) --{ -- switch ( entry->msi_attrib.type ) -- { -- case PCI_CAP_ID_MSI: -- { -- struct pci_dev *dev = entry->dev; -- int pos = entry->msi_attrib.pos; -- uint16_t data; -- -- msg->address_lo = pci_conf_read32(dev->sbdf, -- msi_lower_address_reg(pos)); -- if ( entry->msi_attrib.is_64 ) -- { -- msg->address_hi = pci_conf_read32(dev->sbdf, -- msi_upper_address_reg(pos)); -- data = pci_conf_read16(dev->sbdf, msi_data_reg(pos, 1)); -- } -- else -- { -- msg->address_hi = 0; -- data = pci_conf_read16(dev->sbdf, msi_data_reg(pos, 0)); -- } -- msg->data = data; -- break; -- } -- case PCI_CAP_ID_MSIX: -- { -- void __iomem *base = entry->mask_base; -- -- if ( unlikely(!msix_memory_decoded(entry->dev, -- entry->msi_attrib.pos)) ) -- return false; -- msg->address_lo = readl(base + PCI_MSIX_ENTRY_LOWER_ADDR_OFFSET); -- msg->address_hi = readl(base + PCI_MSIX_ENTRY_UPPER_ADDR_OFFSET); -- msg->data = readl(base + PCI_MSIX_ENTRY_DATA_OFFSET); -- break; -- } -- default: -- BUG(); -- } -- -- if ( iommu_intremap ) -- iommu_read_msi_from_ire(entry, msg); -- -- return true; --} -- - static int write_msi_msg(struct msi_desc *entry, struct msi_msg *msg) - { - entry->msg = *msg; -@@ -302,10 +254,7 @@ void set_msi_affinity(struct irq_desc *d - - ASSERT(spin_is_locked(&desc->lock)); - -- memset(&msg, 0, sizeof(msg)); -- if ( !read_msi_msg(msi_desc, &msg) ) -- return; -- -+ msg = msi_desc->msg; - msg.data &= ~MSI_DATA_VECTOR_MASK; - msg.data |= MSI_DATA_VECTOR(desc->arch.vector); - msg.address_lo &= ~MSI_ADDR_DEST_ID_MASK; diff --git a/system/xen/xsa/xsa337-4.13-2.patch b/system/xen/xsa/xsa337-4.13-2.patch deleted file mode 100644 index bdefd37cdc660..0000000000000 --- a/system/xen/xsa/xsa337-4.13-2.patch +++ /dev/null @@ -1,181 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: x86/MSI-X: restrict reading of table/PBA bases from BARs - -When assigned to less trusted or un-trusted guests, devices may change -state behind our backs (they may e.g. get reset by means we may not know -about). Therefore we should avoid reading BARs from hardware once a -device is no longer owned by Dom0. Furthermore when we can't read a BAR, -or when we read zero, we shouldn't instead use the caller provided -address unless that caller can be trusted. - -Re-arrange the logic in msix_capability_init() such that only Dom0 (and -only if the device isn't DomU-owned yet) or calls through -PHYSDEVOP_prepare_msix will actually result in the reading of the -respective BAR register(s). Additionally do so only as long as in-use -table entries are known (note that invocation of PHYSDEVOP_prepare_msix -counts as a "pseudo" entry). In all other uses the value already -recorded will get used instead. - -Clear the recorded values in _pci_cleanup_msix() as well as on the one -affected error path. (Adjust this error path to also avoid blindly -disabling MSI-X when it was enabled on entry to the function.) - -While moving around variable declarations (in many cases to reduce their -scopes), also adjust some of their types. - -This is part of XSA-337. - -Signed-off-by: Jan Beulich <jbeulich@suse.com> -Reviewed-by: Roger Pau Monné <roger.pau@citrix.com> - ---- a/xen/arch/x86/msi.c -+++ b/xen/arch/x86/msi.c -@@ -769,16 +769,14 @@ static int msix_capability_init(struct p - { - struct arch_msix *msix = dev->msix; - struct msi_desc *entry = NULL; -- int vf; - u16 control; - u64 table_paddr; - u32 table_offset; -- u8 bir, pbus, pslot, pfunc; - u16 seg = dev->seg; - u8 bus = dev->bus; - u8 slot = PCI_SLOT(dev->devfn); - u8 func = PCI_FUNC(dev->devfn); -- bool maskall = msix->host_maskall; -+ bool maskall = msix->host_maskall, zap_on_error = false; - unsigned int pos = pci_find_cap_offset(seg, bus, slot, func, - PCI_CAP_ID_MSIX); - -@@ -820,43 +818,45 @@ static int msix_capability_init(struct p - - /* Locate MSI-X table region */ - table_offset = pci_conf_read32(dev->sbdf, msix_table_offset_reg(pos)); -- bir = (u8)(table_offset & PCI_MSIX_BIRMASK); -- table_offset &= ~PCI_MSIX_BIRMASK; -+ if ( !msix->used_entries && -+ (!msi || -+ (is_hardware_domain(current->domain) && -+ (dev->domain == current->domain || dev->domain == dom_io))) ) -+ { -+ unsigned int bir = table_offset & PCI_MSIX_BIRMASK, pbus, pslot, pfunc; -+ int vf; -+ paddr_t pba_paddr; -+ unsigned int pba_offset; - -- if ( !dev->info.is_virtfn ) -- { -- pbus = bus; -- pslot = slot; -- pfunc = func; -- vf = -1; -- } -- else -- { -- pbus = dev->info.physfn.bus; -- pslot = PCI_SLOT(dev->info.physfn.devfn); -- pfunc = PCI_FUNC(dev->info.physfn.devfn); -- vf = PCI_BDF2(dev->bus, dev->devfn); -- } -- -- table_paddr = read_pci_mem_bar(seg, pbus, pslot, pfunc, bir, vf); -- WARN_ON(msi && msi->table_base != table_paddr); -- if ( !table_paddr ) -- { -- if ( !msi || !msi->table_base ) -+ if ( !dev->info.is_virtfn ) - { -- pci_conf_write16(dev->sbdf, msix_control_reg(pos), -- control & ~PCI_MSIX_FLAGS_ENABLE); -- xfree(entry); -- return -ENXIO; -+ pbus = bus; -+ pslot = slot; -+ pfunc = func; -+ vf = -1; -+ } -+ else -+ { -+ pbus = dev->info.physfn.bus; -+ pslot = PCI_SLOT(dev->info.physfn.devfn); -+ pfunc = PCI_FUNC(dev->info.physfn.devfn); -+ vf = PCI_BDF2(dev->bus, dev->devfn); - } -- table_paddr = msi->table_base; -- } -- table_paddr += table_offset; - -- if ( !msix->used_entries ) -- { -- u64 pba_paddr; -- u32 pba_offset; -+ table_paddr = read_pci_mem_bar(seg, pbus, pslot, pfunc, bir, vf); -+ WARN_ON(msi && msi->table_base != table_paddr); -+ if ( !table_paddr ) -+ { -+ if ( !msi || !msi->table_base ) -+ { -+ pci_conf_write16(dev->sbdf, msix_control_reg(pos), -+ control & ~PCI_MSIX_FLAGS_ENABLE); -+ xfree(entry); -+ return -ENXIO; -+ } -+ table_paddr = msi->table_base; -+ } -+ table_paddr += table_offset & ~PCI_MSIX_BIRMASK; - - msix->table.first = PFN_DOWN(table_paddr); - msix->table.last = PFN_DOWN(table_paddr + -@@ -875,7 +875,18 @@ static int msix_capability_init(struct p - BITS_TO_LONGS(msix->nr_entries) - 1); - WARN_ON(rangeset_overlaps_range(mmio_ro_ranges, msix->pba.first, - msix->pba.last)); -+ -+ zap_on_error = true; -+ } -+ else if ( !msix->table.first ) -+ { -+ pci_conf_write16(dev->sbdf, msix_control_reg(pos), control); -+ xfree(entry); -+ return -ENODATA; - } -+ else -+ table_paddr = (msix->table.first << PAGE_SHIFT) + -+ (table_offset & ~PCI_MSIX_BIRMASK & ~PAGE_MASK); - - if ( entry ) - { -@@ -886,8 +897,15 @@ static int msix_capability_init(struct p - - if ( idx < 0 ) - { -- pci_conf_write16(dev->sbdf, msix_control_reg(pos), -- control & ~PCI_MSIX_FLAGS_ENABLE); -+ if ( zap_on_error ) -+ { -+ msix->table.first = 0; -+ msix->pba.first = 0; -+ -+ control &= ~PCI_MSIX_FLAGS_ENABLE; -+ } -+ -+ pci_conf_write16(dev->sbdf, msix_control_reg(pos), control); - xfree(entry); - return idx; - } -@@ -1076,9 +1094,14 @@ static void _pci_cleanup_msix(struct arc - if ( rangeset_remove_range(mmio_ro_ranges, msix->table.first, - msix->table.last) ) - WARN(); -+ msix->table.first = 0; -+ msix->table.last = 0; -+ - if ( rangeset_remove_range(mmio_ro_ranges, msix->pba.first, - msix->pba.last) ) - WARN(); -+ msix->pba.first = 0; -+ msix->pba.last = 0; - } - } - diff --git a/system/xen/xsa/xsa338.patch b/system/xen/xsa/xsa338.patch deleted file mode 100644 index 776521990e7a3..0000000000000 --- a/system/xen/xsa/xsa338.patch +++ /dev/null @@ -1,42 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: evtchn: relax port_is_valid() - -To avoid ports potentially becoming invalid behind the back of certain -other functions (due to ->max_evtchn shrinking) because of -- a guest invoking evtchn_reset() and from a 2nd vCPU opening new - channels in parallel (see also XSA-343), -- alloc_unbound_xen_event_channel() produced channels living above the - 2-level range (see also XSA-342), -drop the max_evtchns check from port_is_valid(). For a port for which -the function once returned "true", the returned value may not turn into -"false" later on. The function's result may only depend on bounds which -can only ever grow (which is the case for d->valid_evtchns). - -This also eliminates a false sense of safety, utilized by some of the -users (see again XSA-343): Without a suitable lock held, d->max_evtchns -may change at any time, and hence deducing that certain other operations -are safe when port_is_valid() returned true is not legitimate. The -opportunities to abuse this may get widened by the change here -(depending on guest and host configuration), but will be taken care of -by the other XSA. - -This is XSA-338. - -Fixes: 48974e6ce52e ("evtchn: use a per-domain variable for the max number of event channels") -Signed-off-by: Jan Beulich <jbeulich@suse.com> -Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> -Reviewed-by: Julien Grall <jgrall@amazon.com> ---- -v5: New, split from larger patch. - ---- a/xen/include/xen/event.h -+++ b/xen/include/xen/event.h -@@ -107,8 +107,6 @@ void notify_via_xen_event_channel(struct - - static inline bool_t port_is_valid(struct domain *d, unsigned int p) - { -- if ( p >= d->max_evtchns ) -- return 0; - return p < read_atomic(&d->valid_evtchns); - } - diff --git a/system/xen/xsa/xsa339.patch b/system/xen/xsa/xsa339.patch deleted file mode 100644 index 3311ae093fd67..0000000000000 --- a/system/xen/xsa/xsa339.patch +++ /dev/null @@ -1,76 +0,0 @@ -From: Andrew Cooper <andrew.cooper3@citrix.com> -Subject: x86/pv: Avoid double exception injection - -There is at least one path (SYSENTER with NT set, Xen converts to #GP) which -ends up injecting the #GP fault twice, first in compat_sysenter(), and then a -second time in compat_test_all_events(), due to the stale TBF_EXCEPTION left -in TRAPBOUNCE_flags. - -The guest kernel sees the second fault first, which is a kernel level #GP -pointing at the head of the #GP handler, and is therefore a userspace -trigger-able DoS. - -This particular bug has bitten us several times before, so rearrange -{compat_,}create_bounce_frame() to clobber TRAPBOUNCE on success, rather than -leaving this task to one area of code which isn't used uniformly. - -Other scenarios which might result in a double injection (e.g. two calls -directly to compat_create_bounce_frame) will now crash the guest, which is far -more obvious than letting the kernel run with corrupt state. - -This is XSA-339 - -Fixes: fdac9515607b ("x86: clear EFLAGS.NT in SYSENTER entry path") -Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> -Reviewed-by: Jan Beulich <jbeulich@suse.com> - -diff --git a/xen/arch/x86/x86_64/compat/entry.S b/xen/arch/x86/x86_64/compat/entry.S -index c3e62f8734..73619f57ca 100644 ---- a/xen/arch/x86/x86_64/compat/entry.S -+++ b/xen/arch/x86/x86_64/compat/entry.S -@@ -78,7 +78,6 @@ compat_process_softirqs: - sti - .Lcompat_bounce_exception: - call compat_create_bounce_frame -- movb $0, TRAPBOUNCE_flags(%rdx) - jmp compat_test_all_events - - ALIGN -@@ -352,7 +351,13 @@ __UNLIKELY_END(compat_bounce_null_selector) - movl %eax,UREGS_cs+8(%rsp) - movl TRAPBOUNCE_eip(%rdx),%eax - movl %eax,UREGS_rip+8(%rsp) -+ -+ /* Trapbounce complete. Clobber state to avoid an erroneous second injection. */ -+ xor %eax, %eax -+ mov %ax, TRAPBOUNCE_cs(%rdx) -+ mov %al, TRAPBOUNCE_flags(%rdx) - ret -+ - .section .fixup,"ax" - .Lfx13: - xorl %edi,%edi -diff --git a/xen/arch/x86/x86_64/entry.S b/xen/arch/x86/x86_64/entry.S -index 1e880eb9f6..71a00e846b 100644 ---- a/xen/arch/x86/x86_64/entry.S -+++ b/xen/arch/x86/x86_64/entry.S -@@ -90,7 +90,6 @@ process_softirqs: - sti - .Lbounce_exception: - call create_bounce_frame -- movb $0, TRAPBOUNCE_flags(%rdx) - jmp test_all_events - - ALIGN -@@ -512,6 +511,11 @@ UNLIKELY_START(z, create_bounce_frame_bad_bounce_ip) - jmp asm_domain_crash_synchronous /* Does not return */ - __UNLIKELY_END(create_bounce_frame_bad_bounce_ip) - movq %rax,UREGS_rip+8(%rsp) -+ -+ /* Trapbounce complete. Clobber state to avoid an erroneous second injection. */ -+ xor %eax, %eax -+ mov %rax, TRAPBOUNCE_eip(%rdx) -+ mov %al, TRAPBOUNCE_flags(%rdx) - ret - - .pushsection .fixup, "ax", @progbits diff --git a/system/xen/xsa/xsa340.patch b/system/xen/xsa/xsa340.patch deleted file mode 100644 index 38d04da4650a3..0000000000000 --- a/system/xen/xsa/xsa340.patch +++ /dev/null @@ -1,65 +0,0 @@ -From: Julien Grall <jgrall@amazon.com> -Subject: xen/evtchn: Add missing barriers when accessing/allocating an event channel - -While the allocation of a bucket is always performed with the per-domain -lock, the bucket may be accessed without the lock taken (for instance, see -evtchn_send()). - -Instead such sites relies on port_is_valid() to return a non-zero value -when the port has a struct evtchn associated to it. The function will -mostly check whether the port is less than d->valid_evtchns as all the -buckets/event channels should be allocated up to that point. - -Unfortunately a compiler is free to re-order the assignment in -evtchn_allocate_port() so it would be possible to have d->valid_evtchns -updated before the new bucket has finish to allocate. - -Additionally on Arm, even if this was compiled "correctly", the -processor can still re-order the memory access. - -Add a write memory barrier in the allocation side and a read memory -barrier when the port is valid to prevent any re-ordering issue. - -This is XSA-340. - -Reported-by: Julien Grall <jgrall@amazon.com> -Signed-off-by: Julien Grall <jgrall@amazon.com> -Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> - ---- a/xen/common/event_channel.c -+++ b/xen/common/event_channel.c -@@ -178,6 +178,13 @@ int evtchn_allocate_port(struct domain * - return -ENOMEM; - bucket_from_port(d, port) = chn; - -+ /* -+ * d->valid_evtchns is used to check whether the bucket can be -+ * accessed without the per-domain lock. Therefore, -+ * d->valid_evtchns should be seen *after* the new bucket has -+ * been setup. -+ */ -+ smp_wmb(); - write_atomic(&d->valid_evtchns, d->valid_evtchns + EVTCHNS_PER_BUCKET); - } - ---- a/xen/include/xen/event.h -+++ b/xen/include/xen/event.h -@@ -107,7 +107,17 @@ void notify_via_xen_event_channel(struct - - static inline bool_t port_is_valid(struct domain *d, unsigned int p) - { -- return p < read_atomic(&d->valid_evtchns); -+ if ( p >= read_atomic(&d->valid_evtchns) ) -+ return false; -+ -+ /* -+ * The caller will usually access the event channel afterwards and -+ * may be done without taking the per-domain lock. The barrier is -+ * going in pair the smp_wmb() barrier in evtchn_allocate_port(). -+ */ -+ smp_rmb(); -+ -+ return true; - } - - static inline struct evtchn *evtchn_from_port(struct domain *d, unsigned int p) diff --git a/system/xen/xsa/xsa342-4.13.patch b/system/xen/xsa/xsa342-4.13.patch deleted file mode 100644 index 334baf1b69c0d..0000000000000 --- a/system/xen/xsa/xsa342-4.13.patch +++ /dev/null @@ -1,145 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: evtchn/x86: enforce correct upper limit for 32-bit guests - -The recording of d->max_evtchns in evtchn_2l_init(), in particular with -the limited set of callers of the function, is insufficient. Neither for -PV nor for HVM guests the bitness is known at domain_create() time, yet -the upper bound in 2-level mode depends upon guest bitness. Recording -too high a limit "allows" x86 32-bit domains to open not properly usable -event channels, management of which (inside Xen) would then result in -corruption of the shared info and vCPU info structures. - -Keep the upper limit dynamic for the 2-level case, introducing a helper -function to retrieve the effective limit. This helper is now supposed to -be private to the event channel code. The used in do_poll() and -domain_dump_evtchn_info() weren't consistent with port uses elsewhere -and hence get switched to port_is_valid(). - -Furthermore FIFO mode's setup_ports() gets adjusted to loop only up to -the prior ABI limit, rather than all the way up to the new one. - -Finally a word on the change to do_poll(): Accessing ->max_evtchns -without holding a suitable lock was never safe, as it as well as -->evtchn_port_ops may change behind do_poll()'s back. Using -port_is_valid() instead widens some the window for potential abuse, -until we've dealt with the race altogether (see XSA-343). - -This is XSA-342. - -Reported-by: Julien Grall <jgrall@amazon.com> -Fixes: 48974e6ce52e ("evtchn: use a per-domain variable for the max number of event channels") -Signed-off-by: Jan Beulich <jbeulich@suse.com> -Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> -Reviewed-by: Julien Grall <jgrall@amazon.com> - ---- a/xen/common/event_2l.c -+++ b/xen/common/event_2l.c -@@ -103,7 +103,6 @@ static const struct evtchn_port_ops evtc - void evtchn_2l_init(struct domain *d) - { - d->evtchn_port_ops = &evtchn_port_ops_2l; -- d->max_evtchns = BITS_PER_EVTCHN_WORD(d) * BITS_PER_EVTCHN_WORD(d); - } - - /* ---- a/xen/common/event_channel.c -+++ b/xen/common/event_channel.c -@@ -151,7 +151,7 @@ static void free_evtchn_bucket(struct do - - int evtchn_allocate_port(struct domain *d, evtchn_port_t port) - { -- if ( port > d->max_evtchn_port || port >= d->max_evtchns ) -+ if ( port > d->max_evtchn_port || port >= max_evtchns(d) ) - return -ENOSPC; - - if ( port_is_valid(d, port) ) -@@ -1396,13 +1396,11 @@ static void domain_dump_evtchn_info(stru - - spin_lock(&d->event_lock); - -- for ( port = 1; port < d->max_evtchns; ++port ) -+ for ( port = 1; port_is_valid(d, port); ++port ) - { - const struct evtchn *chn; - char *ssid; - -- if ( !port_is_valid(d, port) ) -- continue; - chn = evtchn_from_port(d, port); - if ( chn->state == ECS_FREE ) - continue; ---- a/xen/common/event_fifo.c -+++ b/xen/common/event_fifo.c -@@ -478,7 +478,7 @@ static void cleanup_event_array(struct d - d->evtchn_fifo = NULL; - } - --static void setup_ports(struct domain *d) -+static void setup_ports(struct domain *d, unsigned int prev_evtchns) - { - unsigned int port; - -@@ -488,7 +488,7 @@ static void setup_ports(struct domain *d - * - save its pending state. - * - set default priority. - */ -- for ( port = 1; port < d->max_evtchns; port++ ) -+ for ( port = 1; port < prev_evtchns; port++ ) - { - struct evtchn *evtchn; - -@@ -546,6 +546,8 @@ int evtchn_fifo_init_control(struct evtc - if ( !d->evtchn_fifo ) - { - struct vcpu *vcb; -+ /* Latch the value before it changes during setup_event_array(). */ -+ unsigned int prev_evtchns = max_evtchns(d); - - for_each_vcpu ( d, vcb ) { - rc = setup_control_block(vcb); -@@ -562,8 +564,7 @@ int evtchn_fifo_init_control(struct evtc - goto error; - - d->evtchn_port_ops = &evtchn_port_ops_fifo; -- d->max_evtchns = EVTCHN_FIFO_NR_CHANNELS; -- setup_ports(d); -+ setup_ports(d, prev_evtchns); - } - else - rc = map_control_block(v, gfn, offset); ---- a/xen/common/schedule.c -+++ b/xen/common/schedule.c -@@ -1434,7 +1434,7 @@ static long do_poll(struct sched_poll *s - goto out; - - rc = -EINVAL; -- if ( port >= d->max_evtchns ) -+ if ( !port_is_valid(d, port) ) - goto out; - - rc = 0; ---- a/xen/include/xen/event.h -+++ b/xen/include/xen/event.h -@@ -105,6 +105,12 @@ void notify_via_xen_event_channel(struct - #define bucket_from_port(d, p) \ - ((group_from_port(d, p))[((p) % EVTCHNS_PER_GROUP) / EVTCHNS_PER_BUCKET]) - -+static inline unsigned int max_evtchns(const struct domain *d) -+{ -+ return d->evtchn_fifo ? EVTCHN_FIFO_NR_CHANNELS -+ : BITS_PER_EVTCHN_WORD(d) * BITS_PER_EVTCHN_WORD(d); -+} -+ - static inline bool_t port_is_valid(struct domain *d, unsigned int p) - { - if ( p >= read_atomic(&d->valid_evtchns) ) ---- a/xen/include/xen/sched.h -+++ b/xen/include/xen/sched.h -@@ -382,7 +382,6 @@ struct domain - /* Event channel information. */ - struct evtchn *evtchn; /* first bucket only */ - struct evtchn **evtchn_group[NR_EVTCHN_GROUPS]; /* all other buckets */ -- unsigned int max_evtchns; /* number supported by ABI */ - unsigned int max_evtchn_port; /* max permitted port number */ - unsigned int valid_evtchns; /* number of allocated event channels */ - spinlock_t event_lock; diff --git a/system/xen/xsa/xsa343-1.patch b/system/xen/xsa/xsa343-1.patch deleted file mode 100644 index 0abbc03e8d6ac..0000000000000 --- a/system/xen/xsa/xsa343-1.patch +++ /dev/null @@ -1,199 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: evtchn: evtchn_reset() shouldn't succeed with still-open ports - -While the function closes all ports, it does so without holding any -lock, and hence racing requests may be issued causing new ports to get -opened. This would have been problematic in particular if such a newly -opened port had a port number above the new implementation limit (i.e. -when switching from FIFO to 2-level) after the reset, as prior to -"evtchn: relax port_is_valid()" this could have led to e.g. -evtchn_close()'s "BUG_ON(!port_is_valid(d2, port2))" to trigger. - -Introduce a counter of active ports and check that it's (still) no -larger then the number of Xen internally used ones after obtaining the -necessary lock in evtchn_reset(). - -As to the access model of the new {active,xen}_evtchns fields - while -all writes get done using write_atomic(), reads ought to use -read_atomic() only when outside of a suitably locked region. - -Note that as of now evtchn_bind_virq() and evtchn_bind_ipi() don't have -a need to call check_free_port(). - -This is part of XSA-343. - -Signed-off-by: Jan Beulich <jbeulich@suse.com> -Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> -Reviewed-by: Julien Grall <jgrall@amazon.com> ---- -v7: Drop optimization from evtchn_reset(). -v6: Fix loop exit condition in evtchn_reset(). Use {read,write}_atomic() - also for xen_evtchns. -v5: Move increment in alloc_unbound_xen_event_channel() out of the inner - locked region. -v4: Account for Xen internal ports. -v3: Document intended access next to new struct field. -v2: Add comment to check_free_port(). Drop commented out calls. - ---- a/xen/common/event_channel.c -+++ b/xen/common/event_channel.c -@@ -188,6 +188,8 @@ int evtchn_allocate_port(struct domain * - write_atomic(&d->valid_evtchns, d->valid_evtchns + EVTCHNS_PER_BUCKET); - } - -+ write_atomic(&d->active_evtchns, d->active_evtchns + 1); -+ - return 0; - } - -@@ -211,11 +213,26 @@ static int get_free_port(struct domain * - return -ENOSPC; - } - -+/* -+ * Check whether a port is still marked free, and if so update the domain -+ * counter accordingly. To be used on function exit paths. -+ */ -+static void check_free_port(struct domain *d, evtchn_port_t port) -+{ -+ if ( port_is_valid(d, port) && -+ evtchn_from_port(d, port)->state == ECS_FREE ) -+ write_atomic(&d->active_evtchns, d->active_evtchns - 1); -+} -+ - void evtchn_free(struct domain *d, struct evtchn *chn) - { - /* Clear pending event to avoid unexpected behavior on re-bind. */ - evtchn_port_clear_pending(d, chn); - -+ if ( consumer_is_xen(chn) ) -+ write_atomic(&d->xen_evtchns, d->xen_evtchns - 1); -+ write_atomic(&d->active_evtchns, d->active_evtchns - 1); -+ - /* Reset binding to vcpu0 when the channel is freed. */ - chn->state = ECS_FREE; - chn->notify_vcpu_id = 0; -@@ -258,6 +275,7 @@ static long evtchn_alloc_unbound(evtchn_ - alloc->port = port; - - out: -+ check_free_port(d, port); - spin_unlock(&d->event_lock); - rcu_unlock_domain(d); - -@@ -351,6 +369,7 @@ static long evtchn_bind_interdomain(evtc - bind->local_port = lport; - - out: -+ check_free_port(ld, lport); - spin_unlock(&ld->event_lock); - if ( ld != rd ) - spin_unlock(&rd->event_lock); -@@ -488,7 +507,7 @@ static long evtchn_bind_pirq(evtchn_bind - struct domain *d = current->domain; - struct vcpu *v = d->vcpu[0]; - struct pirq *info; -- int port, pirq = bind->pirq; -+ int port = 0, pirq = bind->pirq; - long rc; - - if ( (pirq < 0) || (pirq >= d->nr_pirqs) ) -@@ -536,6 +555,7 @@ static long evtchn_bind_pirq(evtchn_bind - arch_evtchn_bind_pirq(d, pirq); - - out: -+ check_free_port(d, port); - spin_unlock(&d->event_lock); - - return rc; -@@ -1011,10 +1031,10 @@ int evtchn_unmask(unsigned int port) - return 0; - } - -- - int evtchn_reset(struct domain *d) - { - unsigned int i; -+ int rc = 0; - - if ( d != current->domain && !d->controller_pause_count ) - return -EINVAL; -@@ -1024,7 +1044,9 @@ int evtchn_reset(struct domain *d) - - spin_lock(&d->event_lock); - -- if ( d->evtchn_fifo ) -+ if ( d->active_evtchns > d->xen_evtchns ) -+ rc = -EAGAIN; -+ else if ( d->evtchn_fifo ) - { - /* Switching back to 2-level ABI. */ - evtchn_fifo_destroy(d); -@@ -1033,7 +1055,7 @@ int evtchn_reset(struct domain *d) - - spin_unlock(&d->event_lock); - -- return 0; -+ return rc; - } - - static long evtchn_set_priority(const struct evtchn_set_priority *set_priority) -@@ -1219,10 +1241,9 @@ int alloc_unbound_xen_event_channel( - - spin_lock(&ld->event_lock); - -- rc = get_free_port(ld); -+ port = rc = get_free_port(ld); - if ( rc < 0 ) - goto out; -- port = rc; - chn = evtchn_from_port(ld, port); - - rc = xsm_evtchn_unbound(XSM_TARGET, ld, chn, remote_domid); -@@ -1238,7 +1259,10 @@ int alloc_unbound_xen_event_channel( - - spin_unlock(&chn->lock); - -+ write_atomic(&ld->xen_evtchns, ld->xen_evtchns + 1); -+ - out: -+ check_free_port(ld, port); - spin_unlock(&ld->event_lock); - - return rc < 0 ? rc : port; -@@ -1314,6 +1338,7 @@ int evtchn_init(struct domain *d, unsign - return -EINVAL; - } - evtchn_from_port(d, 0)->state = ECS_RESERVED; -+ write_atomic(&d->active_evtchns, 0); - - #if MAX_VIRT_CPUS > BITS_PER_LONG - d->poll_mask = xzalloc_array(unsigned long, BITS_TO_LONGS(d->max_vcpus)); -@@ -1340,6 +1365,8 @@ void evtchn_destroy(struct domain *d) - for ( i = 0; port_is_valid(d, i); i++ ) - evtchn_close(d, i, 0); - -+ ASSERT(!d->active_evtchns); -+ - clear_global_virq_handlers(d); - - evtchn_fifo_destroy(d); ---- a/xen/include/xen/sched.h -+++ b/xen/include/xen/sched.h -@@ -361,6 +361,16 @@ struct domain - struct evtchn **evtchn_group[NR_EVTCHN_GROUPS]; /* all other buckets */ - unsigned int max_evtchn_port; /* max permitted port number */ - unsigned int valid_evtchns; /* number of allocated event channels */ -+ /* -+ * Number of in-use event channels. Writers should use write_atomic(). -+ * Readers need to use read_atomic() only when not holding event_lock. -+ */ -+ unsigned int active_evtchns; -+ /* -+ * Number of event channels used internally by Xen (not subject to -+ * EVTCHNOP_reset). Read/write access like for active_evtchns. -+ */ -+ unsigned int xen_evtchns; - spinlock_t event_lock; - const struct evtchn_port_ops *evtchn_port_ops; - struct evtchn_fifo_domain *evtchn_fifo; diff --git a/system/xen/xsa/xsa343-2.patch b/system/xen/xsa/xsa343-2.patch deleted file mode 100644 index b8eb4998f11dd..0000000000000 --- a/system/xen/xsa/xsa343-2.patch +++ /dev/null @@ -1,295 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: evtchn: convert per-channel lock to be IRQ-safe - -... in order for send_guest_{global,vcpu}_virq() to be able to make use -of it. - -This is part of XSA-343. - -Signed-off-by: Jan Beulich <jbeulich@suse.com> -Acked-by: Julien Grall <jgrall@amazon.com> ---- -v6: New. ---- -TBD: This is the "dumb" conversion variant. In a couple of cases the - slightly simpler spin_{,un}lock_irq() could apparently be used. - ---- a/xen/common/event_channel.c -+++ b/xen/common/event_channel.c -@@ -248,6 +248,7 @@ static long evtchn_alloc_unbound(evtchn_ - int port; - domid_t dom = alloc->dom; - long rc; -+ unsigned long flags; - - d = rcu_lock_domain_by_any_id(dom); - if ( d == NULL ) -@@ -263,14 +264,14 @@ static long evtchn_alloc_unbound(evtchn_ - if ( rc ) - goto out; - -- spin_lock(&chn->lock); -+ spin_lock_irqsave(&chn->lock, flags); - - chn->state = ECS_UNBOUND; - if ( (chn->u.unbound.remote_domid = alloc->remote_dom) == DOMID_SELF ) - chn->u.unbound.remote_domid = current->domain->domain_id; - evtchn_port_init(d, chn); - -- spin_unlock(&chn->lock); -+ spin_unlock_irqrestore(&chn->lock, flags); - - alloc->port = port; - -@@ -283,26 +284,32 @@ static long evtchn_alloc_unbound(evtchn_ - } - - --static void double_evtchn_lock(struct evtchn *lchn, struct evtchn *rchn) -+static unsigned long double_evtchn_lock(struct evtchn *lchn, -+ struct evtchn *rchn) - { -- if ( lchn < rchn ) -+ unsigned long flags; -+ -+ if ( lchn <= rchn ) - { -- spin_lock(&lchn->lock); -- spin_lock(&rchn->lock); -+ spin_lock_irqsave(&lchn->lock, flags); -+ if ( lchn != rchn ) -+ spin_lock(&rchn->lock); - } - else - { -- if ( lchn != rchn ) -- spin_lock(&rchn->lock); -+ spin_lock_irqsave(&rchn->lock, flags); - spin_lock(&lchn->lock); - } -+ -+ return flags; - } - --static void double_evtchn_unlock(struct evtchn *lchn, struct evtchn *rchn) -+static void double_evtchn_unlock(struct evtchn *lchn, struct evtchn *rchn, -+ unsigned long flags) - { -- spin_unlock(&lchn->lock); - if ( lchn != rchn ) -- spin_unlock(&rchn->lock); -+ spin_unlock(&lchn->lock); -+ spin_unlock_irqrestore(&rchn->lock, flags); - } - - static long evtchn_bind_interdomain(evtchn_bind_interdomain_t *bind) -@@ -312,6 +319,7 @@ static long evtchn_bind_interdomain(evtc - int lport, rport = bind->remote_port; - domid_t rdom = bind->remote_dom; - long rc; -+ unsigned long flags; - - if ( rdom == DOMID_SELF ) - rdom = current->domain->domain_id; -@@ -347,7 +355,7 @@ static long evtchn_bind_interdomain(evtc - if ( rc ) - goto out; - -- double_evtchn_lock(lchn, rchn); -+ flags = double_evtchn_lock(lchn, rchn); - - lchn->u.interdomain.remote_dom = rd; - lchn->u.interdomain.remote_port = rport; -@@ -364,7 +372,7 @@ static long evtchn_bind_interdomain(evtc - */ - evtchn_port_set_pending(ld, lchn->notify_vcpu_id, lchn); - -- double_evtchn_unlock(lchn, rchn); -+ double_evtchn_unlock(lchn, rchn, flags); - - bind->local_port = lport; - -@@ -387,6 +395,7 @@ int evtchn_bind_virq(evtchn_bind_virq_t - struct domain *d = current->domain; - int virq = bind->virq, vcpu = bind->vcpu; - int rc = 0; -+ unsigned long flags; - - if ( (virq < 0) || (virq >= ARRAY_SIZE(v->virq_to_evtchn)) ) - return -EINVAL; -@@ -424,14 +433,14 @@ int evtchn_bind_virq(evtchn_bind_virq_t - - chn = evtchn_from_port(d, port); - -- spin_lock(&chn->lock); -+ spin_lock_irqsave(&chn->lock, flags); - - chn->state = ECS_VIRQ; - chn->notify_vcpu_id = vcpu; - chn->u.virq = virq; - evtchn_port_init(d, chn); - -- spin_unlock(&chn->lock); -+ spin_unlock_irqrestore(&chn->lock, flags); - - v->virq_to_evtchn[virq] = bind->port = port; - -@@ -448,6 +457,7 @@ static long evtchn_bind_ipi(evtchn_bind_ - struct domain *d = current->domain; - int port, vcpu = bind->vcpu; - long rc = 0; -+ unsigned long flags; - - if ( domain_vcpu(d, vcpu) == NULL ) - return -ENOENT; -@@ -459,13 +469,13 @@ static long evtchn_bind_ipi(evtchn_bind_ - - chn = evtchn_from_port(d, port); - -- spin_lock(&chn->lock); -+ spin_lock_irqsave(&chn->lock, flags); - - chn->state = ECS_IPI; - chn->notify_vcpu_id = vcpu; - evtchn_port_init(d, chn); - -- spin_unlock(&chn->lock); -+ spin_unlock_irqrestore(&chn->lock, flags); - - bind->port = port; - -@@ -509,6 +519,7 @@ static long evtchn_bind_pirq(evtchn_bind - struct pirq *info; - int port = 0, pirq = bind->pirq; - long rc; -+ unsigned long flags; - - if ( (pirq < 0) || (pirq >= d->nr_pirqs) ) - return -EINVAL; -@@ -541,14 +552,14 @@ static long evtchn_bind_pirq(evtchn_bind - goto out; - } - -- spin_lock(&chn->lock); -+ spin_lock_irqsave(&chn->lock, flags); - - chn->state = ECS_PIRQ; - chn->u.pirq.irq = pirq; - link_pirq_port(port, chn, v); - evtchn_port_init(d, chn); - -- spin_unlock(&chn->lock); -+ spin_unlock_irqrestore(&chn->lock, flags); - - bind->port = port; - -@@ -569,6 +580,7 @@ int evtchn_close(struct domain *d1, int - struct evtchn *chn1, *chn2; - int port2; - long rc = 0; -+ unsigned long flags; - - again: - spin_lock(&d1->event_lock); -@@ -668,14 +680,14 @@ int evtchn_close(struct domain *d1, int - BUG_ON(chn2->state != ECS_INTERDOMAIN); - BUG_ON(chn2->u.interdomain.remote_dom != d1); - -- double_evtchn_lock(chn1, chn2); -+ flags = double_evtchn_lock(chn1, chn2); - - evtchn_free(d1, chn1); - - chn2->state = ECS_UNBOUND; - chn2->u.unbound.remote_domid = d1->domain_id; - -- double_evtchn_unlock(chn1, chn2); -+ double_evtchn_unlock(chn1, chn2, flags); - - goto out; - -@@ -683,9 +695,9 @@ int evtchn_close(struct domain *d1, int - BUG(); - } - -- spin_lock(&chn1->lock); -+ spin_lock_irqsave(&chn1->lock, flags); - evtchn_free(d1, chn1); -- spin_unlock(&chn1->lock); -+ spin_unlock_irqrestore(&chn1->lock, flags); - - out: - if ( d2 != NULL ) -@@ -705,13 +717,14 @@ int evtchn_send(struct domain *ld, unsig - struct evtchn *lchn, *rchn; - struct domain *rd; - int rport, ret = 0; -+ unsigned long flags; - - if ( !port_is_valid(ld, lport) ) - return -EINVAL; - - lchn = evtchn_from_port(ld, lport); - -- spin_lock(&lchn->lock); -+ spin_lock_irqsave(&lchn->lock, flags); - - /* Guest cannot send via a Xen-attached event channel. */ - if ( unlikely(consumer_is_xen(lchn)) ) -@@ -746,7 +759,7 @@ int evtchn_send(struct domain *ld, unsig - } - - out: -- spin_unlock(&lchn->lock); -+ spin_unlock_irqrestore(&lchn->lock, flags); - - return ret; - } -@@ -1238,6 +1251,7 @@ int alloc_unbound_xen_event_channel( - { - struct evtchn *chn; - int port, rc; -+ unsigned long flags; - - spin_lock(&ld->event_lock); - -@@ -1250,14 +1264,14 @@ int alloc_unbound_xen_event_channel( - if ( rc ) - goto out; - -- spin_lock(&chn->lock); -+ spin_lock_irqsave(&chn->lock, flags); - - chn->state = ECS_UNBOUND; - chn->xen_consumer = get_xen_consumer(notification_fn); - chn->notify_vcpu_id = lvcpu; - chn->u.unbound.remote_domid = remote_domid; - -- spin_unlock(&chn->lock); -+ spin_unlock_irqrestore(&chn->lock, flags); - - write_atomic(&ld->xen_evtchns, ld->xen_evtchns + 1); - -@@ -1280,11 +1294,12 @@ void notify_via_xen_event_channel(struct - { - struct evtchn *lchn, *rchn; - struct domain *rd; -+ unsigned long flags; - - ASSERT(port_is_valid(ld, lport)); - lchn = evtchn_from_port(ld, lport); - -- spin_lock(&lchn->lock); -+ spin_lock_irqsave(&lchn->lock, flags); - - if ( likely(lchn->state == ECS_INTERDOMAIN) ) - { -@@ -1294,7 +1309,7 @@ void notify_via_xen_event_channel(struct - evtchn_port_set_pending(rd, rchn->notify_vcpu_id, rchn); - } - -- spin_unlock(&lchn->lock); -+ spin_unlock_irqrestore(&lchn->lock, flags); - } - - void evtchn_check_pollers(struct domain *d, unsigned int port) diff --git a/system/xen/xsa/xsa343-3.patch b/system/xen/xsa/xsa343-3.patch deleted file mode 100644 index e513e308eb3ee..0000000000000 --- a/system/xen/xsa/xsa343-3.patch +++ /dev/null @@ -1,392 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: evtchn: address races with evtchn_reset() - -Neither d->evtchn_port_ops nor max_evtchns(d) may be used in an entirely -lock-less manner, as both may change by a racing evtchn_reset(). In the -common case, at least one of the domain's event lock or the per-channel -lock needs to be held. In the specific case of the inter-domain sending -by evtchn_send() and notify_via_xen_event_channel() holding the other -side's per-channel lock is sufficient, as the channel can't change state -without both per-channel locks held. Without such a channel changing -state, evtchn_reset() can't complete successfully. - -Lock-free accesses continue to be permitted for the shim (calling some -otherwise internal event channel functions), as this happens while the -domain is in effectively single-threaded mode. Special care also needs -taking for the shim's marking of in-use ports as ECS_RESERVED (allowing -use of such ports in the shim case is okay because switching into and -hence also out of FIFO mode is impossihble there). - -As a side effect, certain operations on Xen bound event channels which -were mistakenly permitted so far (e.g. unmask or poll) will be refused -now. - -This is part of XSA-343. - -Reported-by: Julien Grall <jgrall@amazon.com> -Signed-off-by: Jan Beulich <jbeulich@suse.com> -Acked-by: Julien Grall <jgrall@amazon.com> ---- -v9: Add arch_evtchn_is_special() to fix PV shim. -v8: Add BUILD_BUG_ON() in evtchn_usable(). -v7: Add locking related comment ahead of struct evtchn_port_ops. -v6: New. ---- -TBD: I've been considering to move some of the wrappers from xen/event.h - into event_channel.c (or even drop them altogether), when they - require external locking (e.g. evtchn_port_init() or - evtchn_port_set_priority()). Does anyone have a strong opinion - either way? - ---- a/xen/arch/x86/irq.c -+++ b/xen/arch/x86/irq.c -@@ -2488,14 +2488,24 @@ static void dump_irqs(unsigned char key) - - for ( i = 0; i < action->nr_guests; ) - { -+ struct evtchn *evtchn; -+ unsigned int pending = 2, masked = 2; -+ - d = action->guest[i++]; - pirq = domain_irq_to_pirq(d, irq); - info = pirq_info(d, pirq); -+ evtchn = evtchn_from_port(d, info->evtchn); -+ local_irq_disable(); -+ if ( spin_trylock(&evtchn->lock) ) -+ { -+ pending = evtchn_is_pending(d, evtchn); -+ masked = evtchn_is_masked(d, evtchn); -+ spin_unlock(&evtchn->lock); -+ } -+ local_irq_enable(); - printk("d%d:%3d(%c%c%c)%c", -- d->domain_id, pirq, -- evtchn_port_is_pending(d, info->evtchn) ? 'P' : '-', -- evtchn_port_is_masked(d, info->evtchn) ? 'M' : '-', -- info->masked ? 'M' : '-', -+ d->domain_id, pirq, "-P?"[pending], -+ "-M?"[masked], info->masked ? 'M' : '-', - i < action->nr_guests ? ',' : '\n'); - } - } ---- a/xen/arch/x86/pv/shim.c -+++ b/xen/arch/x86/pv/shim.c -@@ -660,8 +660,11 @@ void pv_shim_inject_evtchn(unsigned int - if ( port_is_valid(guest, port) ) - { - struct evtchn *chn = evtchn_from_port(guest, port); -+ unsigned long flags; - -+ spin_lock_irqsave(&chn->lock, flags); - evtchn_port_set_pending(guest, chn->notify_vcpu_id, chn); -+ spin_unlock_irqrestore(&chn->lock, flags); - } - } - ---- a/xen/common/event_2l.c -+++ b/xen/common/event_2l.c -@@ -63,8 +63,10 @@ static void evtchn_2l_unmask(struct doma - } - } - --static bool evtchn_2l_is_pending(const struct domain *d, evtchn_port_t port) -+static bool evtchn_2l_is_pending(const struct domain *d, -+ const struct evtchn *evtchn) - { -+ evtchn_port_t port = evtchn->port; - unsigned int max_ports = BITS_PER_EVTCHN_WORD(d) * BITS_PER_EVTCHN_WORD(d); - - ASSERT(port < max_ports); -@@ -72,8 +74,10 @@ static bool evtchn_2l_is_pending(const s - guest_test_bit(d, port, &shared_info(d, evtchn_pending))); - } - --static bool evtchn_2l_is_masked(const struct domain *d, evtchn_port_t port) -+static bool evtchn_2l_is_masked(const struct domain *d, -+ const struct evtchn *evtchn) - { -+ evtchn_port_t port = evtchn->port; - unsigned int max_ports = BITS_PER_EVTCHN_WORD(d) * BITS_PER_EVTCHN_WORD(d); - - ASSERT(port < max_ports); ---- a/xen/common/event_channel.c -+++ b/xen/common/event_channel.c -@@ -156,8 +156,9 @@ int evtchn_allocate_port(struct domain * - - if ( port_is_valid(d, port) ) - { -- if ( evtchn_from_port(d, port)->state != ECS_FREE || -- evtchn_port_is_busy(d, port) ) -+ const struct evtchn *chn = evtchn_from_port(d, port); -+ -+ if ( chn->state != ECS_FREE || evtchn_is_busy(d, chn) ) - return -EBUSY; - } - else -@@ -774,6 +775,7 @@ void send_guest_vcpu_virq(struct vcpu *v - unsigned long flags; - int port; - struct domain *d; -+ struct evtchn *chn; - - ASSERT(!virq_is_global(virq)); - -@@ -784,7 +786,10 @@ void send_guest_vcpu_virq(struct vcpu *v - goto out; - - d = v->domain; -- evtchn_port_set_pending(d, v->vcpu_id, evtchn_from_port(d, port)); -+ chn = evtchn_from_port(d, port); -+ spin_lock(&chn->lock); -+ evtchn_port_set_pending(d, v->vcpu_id, chn); -+ spin_unlock(&chn->lock); - - out: - spin_unlock_irqrestore(&v->virq_lock, flags); -@@ -813,7 +818,9 @@ void send_guest_global_virq(struct domai - goto out; - - chn = evtchn_from_port(d, port); -+ spin_lock(&chn->lock); - evtchn_port_set_pending(d, chn->notify_vcpu_id, chn); -+ spin_unlock(&chn->lock); - - out: - spin_unlock_irqrestore(&v->virq_lock, flags); -@@ -823,6 +830,7 @@ void send_guest_pirq(struct domain *d, c - { - int port; - struct evtchn *chn; -+ unsigned long flags; - - /* - * PV guests: It should not be possible to race with __evtchn_close(). The -@@ -837,7 +845,9 @@ void send_guest_pirq(struct domain *d, c - } - - chn = evtchn_from_port(d, port); -+ spin_lock_irqsave(&chn->lock, flags); - evtchn_port_set_pending(d, chn->notify_vcpu_id, chn); -+ spin_unlock_irqrestore(&chn->lock, flags); - } - - static struct domain *global_virq_handlers[NR_VIRQS] __read_mostly; -@@ -1034,12 +1044,15 @@ int evtchn_unmask(unsigned int port) - { - struct domain *d = current->domain; - struct evtchn *evtchn; -+ unsigned long flags; - - if ( unlikely(!port_is_valid(d, port)) ) - return -EINVAL; - - evtchn = evtchn_from_port(d, port); -+ spin_lock_irqsave(&evtchn->lock, flags); - evtchn_port_unmask(d, evtchn); -+ spin_unlock_irqrestore(&evtchn->lock, flags); - - return 0; - } -@@ -1449,8 +1462,8 @@ static void domain_dump_evtchn_info(stru - - printk(" %4u [%d/%d/", - port, -- evtchn_port_is_pending(d, port), -- evtchn_port_is_masked(d, port)); -+ evtchn_is_pending(d, chn), -+ evtchn_is_masked(d, chn)); - evtchn_port_print_state(d, chn); - printk("]: s=%d n=%d x=%d", - chn->state, chn->notify_vcpu_id, chn->xen_consumer); ---- a/xen/common/event_fifo.c -+++ b/xen/common/event_fifo.c -@@ -296,23 +296,26 @@ static void evtchn_fifo_unmask(struct do - evtchn_fifo_set_pending(v, evtchn); - } - --static bool evtchn_fifo_is_pending(const struct domain *d, evtchn_port_t port) -+static bool evtchn_fifo_is_pending(const struct domain *d, -+ const struct evtchn *evtchn) - { -- const event_word_t *word = evtchn_fifo_word_from_port(d, port); -+ const event_word_t *word = evtchn_fifo_word_from_port(d, evtchn->port); - - return word && guest_test_bit(d, EVTCHN_FIFO_PENDING, word); - } - --static bool_t evtchn_fifo_is_masked(const struct domain *d, evtchn_port_t port) -+static bool_t evtchn_fifo_is_masked(const struct domain *d, -+ const struct evtchn *evtchn) - { -- const event_word_t *word = evtchn_fifo_word_from_port(d, port); -+ const event_word_t *word = evtchn_fifo_word_from_port(d, evtchn->port); - - return !word || guest_test_bit(d, EVTCHN_FIFO_MASKED, word); - } - --static bool_t evtchn_fifo_is_busy(const struct domain *d, evtchn_port_t port) -+static bool_t evtchn_fifo_is_busy(const struct domain *d, -+ const struct evtchn *evtchn) - { -- const event_word_t *word = evtchn_fifo_word_from_port(d, port); -+ const event_word_t *word = evtchn_fifo_word_from_port(d, evtchn->port); - - return word && guest_test_bit(d, EVTCHN_FIFO_LINKED, word); - } ---- a/xen/include/asm-x86/event.h -+++ b/xen/include/asm-x86/event.h -@@ -47,4 +47,10 @@ static inline bool arch_virq_is_global(u - return true; - } - -+#ifdef CONFIG_PV_SHIM -+# include <asm/pv/shim.h> -+# define arch_evtchn_is_special(chn) \ -+ (pv_shim && (chn)->port && (chn)->state == ECS_RESERVED) -+#endif -+ - #endif ---- a/xen/include/xen/event.h -+++ b/xen/include/xen/event.h -@@ -133,6 +133,24 @@ static inline struct evtchn *evtchn_from - return bucket_from_port(d, p) + (p % EVTCHNS_PER_BUCKET); - } - -+/* -+ * "usable" as in "by a guest", i.e. Xen consumed channels are assumed to be -+ * taken care of separately where used for Xen's internal purposes. -+ */ -+static bool evtchn_usable(const struct evtchn *evtchn) -+{ -+ if ( evtchn->xen_consumer ) -+ return false; -+ -+#ifdef arch_evtchn_is_special -+ if ( arch_evtchn_is_special(evtchn) ) -+ return true; -+#endif -+ -+ BUILD_BUG_ON(ECS_FREE > ECS_RESERVED); -+ return evtchn->state > ECS_RESERVED; -+} -+ - /* Wait on a Xen-attached event channel. */ - #define wait_on_xen_event_channel(port, condition) \ - do { \ -@@ -165,19 +183,24 @@ int evtchn_reset(struct domain *d); - - /* - * Low-level event channel port ops. -+ * -+ * All hooks have to be called with a lock held which prevents the channel -+ * from changing state. This may be the domain event lock, the per-channel -+ * lock, or in the case of sending interdomain events also the other side's -+ * per-channel lock. Exceptions apply in certain cases for the PV shim. - */ - struct evtchn_port_ops { - void (*init)(struct domain *d, struct evtchn *evtchn); - void (*set_pending)(struct vcpu *v, struct evtchn *evtchn); - void (*clear_pending)(struct domain *d, struct evtchn *evtchn); - void (*unmask)(struct domain *d, struct evtchn *evtchn); -- bool (*is_pending)(const struct domain *d, evtchn_port_t port); -- bool (*is_masked)(const struct domain *d, evtchn_port_t port); -+ bool (*is_pending)(const struct domain *d, const struct evtchn *evtchn); -+ bool (*is_masked)(const struct domain *d, const struct evtchn *evtchn); - /* - * Is the port unavailable because it's still being cleaned up - * after being closed? - */ -- bool (*is_busy)(const struct domain *d, evtchn_port_t port); -+ bool (*is_busy)(const struct domain *d, const struct evtchn *evtchn); - int (*set_priority)(struct domain *d, struct evtchn *evtchn, - unsigned int priority); - void (*print_state)(struct domain *d, const struct evtchn *evtchn); -@@ -193,38 +216,67 @@ static inline void evtchn_port_set_pendi - unsigned int vcpu_id, - struct evtchn *evtchn) - { -- d->evtchn_port_ops->set_pending(d->vcpu[vcpu_id], evtchn); -+ if ( evtchn_usable(evtchn) ) -+ d->evtchn_port_ops->set_pending(d->vcpu[vcpu_id], evtchn); - } - - static inline void evtchn_port_clear_pending(struct domain *d, - struct evtchn *evtchn) - { -- d->evtchn_port_ops->clear_pending(d, evtchn); -+ if ( evtchn_usable(evtchn) ) -+ d->evtchn_port_ops->clear_pending(d, evtchn); - } - - static inline void evtchn_port_unmask(struct domain *d, - struct evtchn *evtchn) - { -- d->evtchn_port_ops->unmask(d, evtchn); -+ if ( evtchn_usable(evtchn) ) -+ d->evtchn_port_ops->unmask(d, evtchn); - } - --static inline bool evtchn_port_is_pending(const struct domain *d, -- evtchn_port_t port) -+static inline bool evtchn_is_pending(const struct domain *d, -+ const struct evtchn *evtchn) - { -- return d->evtchn_port_ops->is_pending(d, port); -+ return evtchn_usable(evtchn) && d->evtchn_port_ops->is_pending(d, evtchn); - } - --static inline bool evtchn_port_is_masked(const struct domain *d, -- evtchn_port_t port) -+static inline bool evtchn_port_is_pending(struct domain *d, evtchn_port_t port) - { -- return d->evtchn_port_ops->is_masked(d, port); -+ struct evtchn *evtchn = evtchn_from_port(d, port); -+ bool rc; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&evtchn->lock, flags); -+ rc = evtchn_is_pending(d, evtchn); -+ spin_unlock_irqrestore(&evtchn->lock, flags); -+ -+ return rc; -+} -+ -+static inline bool evtchn_is_masked(const struct domain *d, -+ const struct evtchn *evtchn) -+{ -+ return !evtchn_usable(evtchn) || d->evtchn_port_ops->is_masked(d, evtchn); -+} -+ -+static inline bool evtchn_port_is_masked(struct domain *d, evtchn_port_t port) -+{ -+ struct evtchn *evtchn = evtchn_from_port(d, port); -+ bool rc; -+ unsigned long flags; -+ -+ spin_lock_irqsave(&evtchn->lock, flags); -+ rc = evtchn_is_masked(d, evtchn); -+ spin_unlock_irqrestore(&evtchn->lock, flags); -+ -+ return rc; - } - --static inline bool evtchn_port_is_busy(const struct domain *d, -- evtchn_port_t port) -+static inline bool evtchn_is_busy(const struct domain *d, -+ const struct evtchn *evtchn) - { - return d->evtchn_port_ops->is_busy && -- d->evtchn_port_ops->is_busy(d, port); -+ d->evtchn_port_ops->is_busy(d, evtchn); - } - - static inline int evtchn_port_set_priority(struct domain *d, -@@ -233,6 +285,8 @@ static inline int evtchn_port_set_priori - { - if ( !d->evtchn_port_ops->set_priority ) - return -ENOSYS; -+ if ( !evtchn_usable(evtchn) ) -+ return -EACCES; - return d->evtchn_port_ops->set_priority(d, evtchn, priority); - } - diff --git a/system/xen/xsa/xsa344-4.13-1.patch b/system/xen/xsa/xsa344-4.13-1.patch deleted file mode 100644 index d8e9b3f43ffaa..0000000000000 --- a/system/xen/xsa/xsa344-4.13-1.patch +++ /dev/null @@ -1,130 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: evtchn: arrange for preemption in evtchn_destroy() - -Especially closing of fully established interdomain channels can take -quite some time, due to the locking involved. Therefore we shouldn't -assume we can clean up still active ports all in one go. Besides adding -the necessary preemption check, also avoid pointlessly starting from -(or now really ending at) 0; 1 is the lowest numbered port which may -need closing. - -Since we're now reducing ->valid_evtchns, free_xen_event_channel(), -and (at least to be on the safe side) notify_via_xen_event_channel() -need to cope with attempts to close / unbind from / send through already -closed (and no longer valid, as per port_is_valid()) ports. - -This is part of XSA-344. - -Signed-off-by: Jan Beulich <jbeulich@suse.com> -Acked-by: Julien Grall <jgrall@amazon.com> -Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> - ---- a/xen/common/domain.c -+++ b/xen/common/domain.c -@@ -770,12 +770,14 @@ int domain_kill(struct domain *d) - return domain_kill(d); - d->is_dying = DOMDYING_dying; - argo_destroy(d); -- evtchn_destroy(d); - gnttab_release_mappings(d); - vnuma_destroy(d->vnuma); - domain_set_outstanding_pages(d, 0); - /* fallthrough */ - case DOMDYING_dying: -+ rc = evtchn_destroy(d); -+ if ( rc ) -+ break; - rc = domain_relinquish_resources(d); - if ( rc != 0 ) - break; ---- a/xen/common/event_channel.c -+++ b/xen/common/event_channel.c -@@ -1297,7 +1297,16 @@ int alloc_unbound_xen_event_channel( - - void free_xen_event_channel(struct domain *d, int port) - { -- BUG_ON(!port_is_valid(d, port)); -+ if ( !port_is_valid(d, port) ) -+ { -+ /* -+ * Make sure ->is_dying is read /after/ ->valid_evtchns, pairing -+ * with the spin_barrier() and BUG_ON() in evtchn_destroy(). -+ */ -+ smp_rmb(); -+ BUG_ON(!d->is_dying); -+ return; -+ } - - evtchn_close(d, port, 0); - } -@@ -1309,7 +1318,17 @@ void notify_via_xen_event_channel(struct - struct domain *rd; - unsigned long flags; - -- ASSERT(port_is_valid(ld, lport)); -+ if ( !port_is_valid(ld, lport) ) -+ { -+ /* -+ * Make sure ->is_dying is read /after/ ->valid_evtchns, pairing -+ * with the spin_barrier() and BUG_ON() in evtchn_destroy(). -+ */ -+ smp_rmb(); -+ ASSERT(ld->is_dying); -+ return; -+ } -+ - lchn = evtchn_from_port(ld, lport); - - spin_lock_irqsave(&lchn->lock, flags); -@@ -1380,8 +1399,7 @@ int evtchn_init(struct domain *d, unsign - return 0; - } - -- --void evtchn_destroy(struct domain *d) -+int evtchn_destroy(struct domain *d) - { - unsigned int i; - -@@ -1390,14 +1408,29 @@ void evtchn_destroy(struct domain *d) - spin_barrier(&d->event_lock); - - /* Close all existing event channels. */ -- for ( i = 0; port_is_valid(d, i); i++ ) -+ for ( i = d->valid_evtchns; --i; ) -+ { - evtchn_close(d, i, 0); - -+ /* -+ * Avoid preempting when called from domain_create()'s error path, -+ * and don't check too often (choice of frequency is arbitrary). -+ */ -+ if ( i && !(i & 0x3f) && d->is_dying != DOMDYING_dead && -+ hypercall_preempt_check() ) -+ { -+ write_atomic(&d->valid_evtchns, i); -+ return -ERESTART; -+ } -+ } -+ - ASSERT(!d->active_evtchns); - - clear_global_virq_handlers(d); - - evtchn_fifo_destroy(d); -+ -+ return 0; - } - - ---- a/xen/include/xen/sched.h -+++ b/xen/include/xen/sched.h -@@ -136,7 +136,7 @@ struct evtchn - } __attribute__((aligned(64))); - - int evtchn_init(struct domain *d, unsigned int max_port); --void evtchn_destroy(struct domain *d); /* from domain_kill */ -+int evtchn_destroy(struct domain *d); /* from domain_kill */ - void evtchn_destroy_final(struct domain *d); /* from complete_domain_destroy */ - - struct waitqueue_vcpu; diff --git a/system/xen/xsa/xsa344-4.13-2.patch b/system/xen/xsa/xsa344-4.13-2.patch deleted file mode 100644 index 3f0339498f078..0000000000000 --- a/system/xen/xsa/xsa344-4.13-2.patch +++ /dev/null @@ -1,203 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: evtchn: arrange for preemption in evtchn_reset() - -Like for evtchn_destroy() looping over all possible event channels to -close them can take a significant amount of time. Unlike done there, we -can't alter domain properties (i.e. d->valid_evtchns) here. Borrow, in a -lightweight form, the paging domctl continuation concept, redirecting -the continuations to different sub-ops. Just like there this is to be -able to allow for predictable overall results of the involved sub-ops: -Racing requests should either complete or be refused. - -Note that a domain can't interfere with an already started (by a remote -domain) reset, due to being paused. It can prevent a remote reset from -happening by leaving a reset unfinished, but that's only going to affect -itself. - -This is part of XSA-344. - -Signed-off-by: Jan Beulich <jbeulich@suse.com> -Acked-by: Julien Grall <jgrall@amazon.com> -Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> - ---- a/xen/common/domain.c -+++ b/xen/common/domain.c -@@ -1214,7 +1214,7 @@ void domain_unpause_except_self(struct d - domain_unpause(d); - } - --int domain_soft_reset(struct domain *d) -+int domain_soft_reset(struct domain *d, bool resuming) - { - struct vcpu *v; - int rc; -@@ -1228,7 +1228,7 @@ int domain_soft_reset(struct domain *d) - } - spin_unlock(&d->shutdown_lock); - -- rc = evtchn_reset(d); -+ rc = evtchn_reset(d, resuming); - if ( rc ) - return rc; - ---- a/xen/common/domctl.c -+++ b/xen/common/domctl.c -@@ -572,12 +572,22 @@ long do_domctl(XEN_GUEST_HANDLE_PARAM(xe - } - - case XEN_DOMCTL_soft_reset: -+ case XEN_DOMCTL_soft_reset_cont: - if ( d == current->domain ) /* no domain_pause() */ - { - ret = -EINVAL; - break; - } -- ret = domain_soft_reset(d); -+ ret = domain_soft_reset(d, op->cmd == XEN_DOMCTL_soft_reset_cont); -+ if ( ret == -ERESTART ) -+ { -+ op->cmd = XEN_DOMCTL_soft_reset_cont; -+ if ( !__copy_field_to_guest(u_domctl, op, cmd) ) -+ ret = hypercall_create_continuation(__HYPERVISOR_domctl, -+ "h", u_domctl); -+ else -+ ret = -EFAULT; -+ } - break; - - case XEN_DOMCTL_destroydomain: ---- a/xen/common/event_channel.c -+++ b/xen/common/event_channel.c -@@ -1057,7 +1057,7 @@ int evtchn_unmask(unsigned int port) - return 0; - } - --int evtchn_reset(struct domain *d) -+int evtchn_reset(struct domain *d, bool resuming) - { - unsigned int i; - int rc = 0; -@@ -1065,11 +1065,40 @@ int evtchn_reset(struct domain *d) - if ( d != current->domain && !d->controller_pause_count ) - return -EINVAL; - -- for ( i = 0; port_is_valid(d, i); i++ ) -+ spin_lock(&d->event_lock); -+ -+ /* -+ * If we are resuming, then start where we stopped. Otherwise, check -+ * that a reset operation is not already in progress, and if none is, -+ * record that this is now the case. -+ */ -+ i = resuming ? d->next_evtchn : !d->next_evtchn; -+ if ( i > d->next_evtchn ) -+ d->next_evtchn = i; -+ -+ spin_unlock(&d->event_lock); -+ -+ if ( !i ) -+ return -EBUSY; -+ -+ for ( ; port_is_valid(d, i); i++ ) -+ { - evtchn_close(d, i, 1); - -+ /* NB: Choice of frequency is arbitrary. */ -+ if ( !(i & 0x3f) && hypercall_preempt_check() ) -+ { -+ spin_lock(&d->event_lock); -+ d->next_evtchn = i; -+ spin_unlock(&d->event_lock); -+ return -ERESTART; -+ } -+ } -+ - spin_lock(&d->event_lock); - -+ d->next_evtchn = 0; -+ - if ( d->active_evtchns > d->xen_evtchns ) - rc = -EAGAIN; - else if ( d->evtchn_fifo ) -@@ -1204,7 +1233,8 @@ long do_event_channel_op(int cmd, XEN_GU - break; - } - -- case EVTCHNOP_reset: { -+ case EVTCHNOP_reset: -+ case EVTCHNOP_reset_cont: { - struct evtchn_reset reset; - struct domain *d; - -@@ -1217,9 +1247,13 @@ long do_event_channel_op(int cmd, XEN_GU - - rc = xsm_evtchn_reset(XSM_TARGET, current->domain, d); - if ( !rc ) -- rc = evtchn_reset(d); -+ rc = evtchn_reset(d, cmd == EVTCHNOP_reset_cont); - - rcu_unlock_domain(d); -+ -+ if ( rc == -ERESTART ) -+ rc = hypercall_create_continuation(__HYPERVISOR_event_channel_op, -+ "ih", EVTCHNOP_reset_cont, arg); - break; - } - ---- a/xen/include/public/domctl.h -+++ b/xen/include/public/domctl.h -@@ -1152,7 +1152,10 @@ struct xen_domctl { - #define XEN_DOMCTL_iomem_permission 20 - #define XEN_DOMCTL_ioport_permission 21 - #define XEN_DOMCTL_hypercall_init 22 --#define XEN_DOMCTL_arch_setup 23 /* Obsolete IA64 only */ -+#ifdef __XEN__ -+/* #define XEN_DOMCTL_arch_setup 23 Obsolete IA64 only */ -+#define XEN_DOMCTL_soft_reset_cont 23 -+#endif - #define XEN_DOMCTL_settimeoffset 24 - #define XEN_DOMCTL_getvcpuaffinity 25 - #define XEN_DOMCTL_real_mode_area 26 /* Obsolete PPC only */ ---- a/xen/include/public/event_channel.h -+++ b/xen/include/public/event_channel.h -@@ -74,6 +74,9 @@ - #define EVTCHNOP_init_control 11 - #define EVTCHNOP_expand_array 12 - #define EVTCHNOP_set_priority 13 -+#ifdef __XEN__ -+#define EVTCHNOP_reset_cont 14 -+#endif - /* ` } */ - - typedef uint32_t evtchn_port_t; ---- a/xen/include/xen/event.h -+++ b/xen/include/xen/event.h -@@ -171,7 +171,7 @@ void evtchn_check_pollers(struct domain - void evtchn_2l_init(struct domain *d); - - /* Close all event channels and reset to 2-level ABI. */ --int evtchn_reset(struct domain *d); -+int evtchn_reset(struct domain *d, bool resuming); - - /* - * Low-level event channel port ops. ---- a/xen/include/xen/sched.h -+++ b/xen/include/xen/sched.h -@@ -394,6 +394,8 @@ struct domain - * EVTCHNOP_reset). Read/write access like for active_evtchns. - */ - unsigned int xen_evtchns; -+ /* Port to resume from in evtchn_reset(), when in a continuation. */ -+ unsigned int next_evtchn; - spinlock_t event_lock; - const struct evtchn_port_ops *evtchn_port_ops; - struct evtchn_fifo_domain *evtchn_fifo; -@@ -663,7 +665,7 @@ int domain_shutdown(struct domain *d, u8 - void domain_resume(struct domain *d); - void domain_pause_for_debugger(void); - --int domain_soft_reset(struct domain *d); -+int domain_soft_reset(struct domain *d, bool resuming); - - int vcpu_start_shutdown_deferral(struct vcpu *v); - void vcpu_end_shutdown_deferral(struct vcpu *v); diff --git a/system/xen/xsa/xsa345-0001-x86-mm-Refactor-map_pages_to_xen-to-have-only-a-sing.patch b/system/xen/xsa/xsa345-0001-x86-mm-Refactor-map_pages_to_xen-to-have-only-a-sing.patch deleted file mode 100644 index d325385a56ef9..0000000000000 --- a/system/xen/xsa/xsa345-0001-x86-mm-Refactor-map_pages_to_xen-to-have-only-a-sing.patch +++ /dev/null @@ -1,94 +0,0 @@ -From b3e0d4e37b7902533a463812374947d4d6d2e463 Mon Sep 17 00:00:00 2001 -From: Wei Liu <wei.liu2@citrix.com> -Date: Sat, 11 Jan 2020 21:57:41 +0000 -Subject: [PATCH 1/3] x86/mm: Refactor map_pages_to_xen to have only a single - exit path - -We will soon need to perform clean-ups before returning. - -No functional change. - -This is part of XSA-345. - -Reported-by: Hongyan Xia <hongyxia@amazon.com> -Signed-off-by: Wei Liu <wei.liu2@citrix.com> -Signed-off-by: Hongyan Xia <hongyxia@amazon.com> -Signed-off-by: George Dunlap <george.dunlap@citrix.com> -Acked-by: Jan Beulich <jbeulich@suse.com> ---- - xen/arch/x86/mm.c | 17 +++++++++++------ - 1 file changed, 11 insertions(+), 6 deletions(-) - -diff --git a/xen/arch/x86/mm.c b/xen/arch/x86/mm.c -index 30dffb68e8..133a393875 100644 ---- a/xen/arch/x86/mm.c -+++ b/xen/arch/x86/mm.c -@@ -5187,6 +5187,7 @@ int map_pages_to_xen( - l2_pgentry_t *pl2e, ol2e; - l1_pgentry_t *pl1e, ol1e; - unsigned int i; -+ int rc = -ENOMEM; - - #define flush_flags(oldf) do { \ - unsigned int o_ = (oldf); \ -@@ -5207,7 +5208,8 @@ int map_pages_to_xen( - l3_pgentry_t ol3e, *pl3e = virt_to_xen_l3e(virt); - - if ( !pl3e ) -- return -ENOMEM; -+ goto out; -+ - ol3e = *pl3e; - - if ( cpu_has_page1gb && -@@ -5295,7 +5297,7 @@ int map_pages_to_xen( - - pl2e = alloc_xen_pagetable(); - if ( pl2e == NULL ) -- return -ENOMEM; -+ goto out; - - for ( i = 0; i < L2_PAGETABLE_ENTRIES; i++ ) - l2e_write(pl2e + i, -@@ -5324,7 +5326,7 @@ int map_pages_to_xen( - - pl2e = virt_to_xen_l2e(virt); - if ( !pl2e ) -- return -ENOMEM; -+ goto out; - - if ( ((((virt >> PAGE_SHIFT) | mfn_x(mfn)) & - ((1u << PAGETABLE_ORDER) - 1)) == 0) && -@@ -5367,7 +5369,7 @@ int map_pages_to_xen( - { - pl1e = virt_to_xen_l1e(virt); - if ( pl1e == NULL ) -- return -ENOMEM; -+ goto out; - } - else if ( l2e_get_flags(*pl2e) & _PAGE_PSE ) - { -@@ -5394,7 +5396,7 @@ int map_pages_to_xen( - - pl1e = alloc_xen_pagetable(); - if ( pl1e == NULL ) -- return -ENOMEM; -+ goto out; - - for ( i = 0; i < L1_PAGETABLE_ENTRIES; i++ ) - l1e_write(&pl1e[i], -@@ -5538,7 +5540,10 @@ int map_pages_to_xen( - - #undef flush_flags - -- return 0; -+ rc = 0; -+ -+ out: -+ return rc; - } - - int populate_pt_range(unsigned long virt, unsigned long nr_mfns) --- -2.25.1 - diff --git a/system/xen/xsa/xsa345-0002-x86-mm-Refactor-modify_xen_mappings-to-have-one-exit.patch b/system/xen/xsa/xsa345-0002-x86-mm-Refactor-modify_xen_mappings-to-have-one-exit.patch deleted file mode 100644 index 836bed681aada..0000000000000 --- a/system/xen/xsa/xsa345-0002-x86-mm-Refactor-modify_xen_mappings-to-have-one-exit.patch +++ /dev/null @@ -1,68 +0,0 @@ -From 9f6f35b833d295acaaa2d8ff8cf309bf688cfd50 Mon Sep 17 00:00:00 2001 -From: Wei Liu <wei.liu2@citrix.com> -Date: Sat, 11 Jan 2020 21:57:42 +0000 -Subject: [PATCH 2/3] x86/mm: Refactor modify_xen_mappings to have one exit - path - -We will soon need to perform clean-ups before returning. - -No functional change. - -This is part of XSA-345. - -Reported-by: Hongyan Xia <hongyxia@amazon.com> -Signed-off-by: Wei Liu <wei.liu2@citrix.com> -Signed-off-by: Hongyan Xia <hongyxia@amazon.com> -Signed-off-by: George Dunlap <george.dunlap@citrix.com> -Acked-by: Jan Beulich <jbeulich@suse.com> ---- - xen/arch/x86/mm.c | 12 +++++++++--- - 1 file changed, 9 insertions(+), 3 deletions(-) - -diff --git a/xen/arch/x86/mm.c b/xen/arch/x86/mm.c -index 133a393875..af726d3274 100644 ---- a/xen/arch/x86/mm.c -+++ b/xen/arch/x86/mm.c -@@ -5570,6 +5570,7 @@ int modify_xen_mappings(unsigned long s, unsigned long e, unsigned int nf) - l1_pgentry_t *pl1e; - unsigned int i; - unsigned long v = s; -+ int rc = -ENOMEM; - - /* Set of valid PTE bits which may be altered. */ - #define FLAGS_MASK (_PAGE_NX|_PAGE_RW|_PAGE_PRESENT) -@@ -5611,7 +5612,8 @@ int modify_xen_mappings(unsigned long s, unsigned long e, unsigned int nf) - /* PAGE1GB: shatter the superpage and fall through. */ - pl2e = alloc_xen_pagetable(); - if ( !pl2e ) -- return -ENOMEM; -+ goto out; -+ - for ( i = 0; i < L2_PAGETABLE_ENTRIES; i++ ) - l2e_write(pl2e + i, - l2e_from_pfn(l3e_get_pfn(*pl3e) + -@@ -5666,7 +5668,8 @@ int modify_xen_mappings(unsigned long s, unsigned long e, unsigned int nf) - /* PSE: shatter the superpage and try again. */ - pl1e = alloc_xen_pagetable(); - if ( !pl1e ) -- return -ENOMEM; -+ goto out; -+ - for ( i = 0; i < L1_PAGETABLE_ENTRIES; i++ ) - l1e_write(&pl1e[i], - l1e_from_pfn(l2e_get_pfn(*pl2e) + i, -@@ -5795,7 +5798,10 @@ int modify_xen_mappings(unsigned long s, unsigned long e, unsigned int nf) - flush_area(NULL, FLUSH_TLB_GLOBAL); - - #undef FLAGS_MASK -- return 0; -+ rc = 0; -+ -+ out: -+ return rc; - } - - #undef flush_area --- -2.25.1 - diff --git a/system/xen/xsa/xsa345-0003-x86-mm-Prevent-some-races-in-hypervisor-mapping-upda.patch b/system/xen/xsa/xsa345-0003-x86-mm-Prevent-some-races-in-hypervisor-mapping-upda.patch deleted file mode 100644 index db407416b9ade..0000000000000 --- a/system/xen/xsa/xsa345-0003-x86-mm-Prevent-some-races-in-hypervisor-mapping-upda.patch +++ /dev/null @@ -1,249 +0,0 @@ -From 0ff9a8453dc47cd47eee9659d5916afb5094e871 Mon Sep 17 00:00:00 2001 -From: Hongyan Xia <hongyxia@amazon.com> -Date: Sat, 11 Jan 2020 21:57:43 +0000 -Subject: [PATCH 3/3] x86/mm: Prevent some races in hypervisor mapping updates - -map_pages_to_xen will attempt to coalesce mappings into 2MiB and 1GiB -superpages if possible, to maximize TLB efficiency. This means both -replacing superpage entries with smaller entries, and replacing -smaller entries with superpages. - -Unfortunately, while some potential races are handled correctly, -others are not. These include: - -1. When one processor modifies a sub-superpage mapping while another -processor replaces the entire range with a superpage. - -Take the following example: - -Suppose L3[N] points to L2. And suppose we have two processors, A and -B. - -* A walks the pagetables, get a pointer to L2. -* B replaces L3[N] with a 1GiB mapping. -* B Frees L2 -* A writes L2[M] # - -This is race exacerbated by the fact that virt_to_xen_l[21]e doesn't -handle higher-level superpages properly: If you call virt_xen_to_l2e -on a virtual address within an L3 superpage, you'll either hit a BUG() -(most likely), or get a pointer into the middle of a data page; same -with virt_xen_to_l1 on a virtual address within either an L3 or L2 -superpage. - -So take the following example: - -* A reads pl3e and discovers it to point to an L2. -* B replaces L3[N] with a 1GiB mapping -* A calls virt_to_xen_l2e() and hits the BUG_ON() # - -2. When two processors simultaneously try to replace a sub-superpage -mapping with a superpage mapping. - -Take the following example: - -Suppose L3[N] points to L2. And suppose we have two processors, A and B, -both trying to replace L3[N] with a superpage. - -* A walks the pagetables, get a pointer to pl3e, and takes a copy ol3e pointing to L2. -* B walks the pagetables, gets a pointre to pl3e, and takes a copy ol3e pointing to L2. -* A writes the new value into L3[N] -* B writes the new value into L3[N] -* A recursively frees all the L1's under L2, then frees L2 -* B recursively double-frees all the L1's under L2, then double-frees L2 # - -Fix this by grabbing a lock for the entirety of the mapping update -operation. - -Rather than grabbing map_pgdir_lock for the entire operation, however, -repurpose the PGT_locked bit from L3's page->type_info as a lock. -This means that rather than locking the entire address space, we -"only" lock a single 512GiB chunk of hypervisor address space at a -time. - -There was a proposal for a lock-and-reverify approach, where we walk -the pagetables to the point where we decide what to do; then grab the -map_pgdir_lock, re-verify the information we collected without the -lock, and finally make the change (starting over again if anything had -changed). Without being able to guarantee that the L2 table wasn't -freed, however, that means every read would need to be considered -potentially unsafe. Thinking carefully about that is probably -something that wants to be done on public, not under time pressure. - -This is part of XSA-345. - -Reported-by: Hongyan Xia <hongyxia@amazon.com> -Signed-off-by: Hongyan Xia <hongyxia@amazon.com> -Signed-off-by: George Dunlap <george.dunlap@citrix.com> -Reviewed-by: Jan Beulich <jbeulich@suse.com> ---- - xen/arch/x86/mm.c | 92 +++++++++++++++++++++++++++++++++++++++++++++-- - 1 file changed, 89 insertions(+), 3 deletions(-) - -diff --git a/xen/arch/x86/mm.c b/xen/arch/x86/mm.c -index af726d3274..d6a0761f43 100644 ---- a/xen/arch/x86/mm.c -+++ b/xen/arch/x86/mm.c -@@ -2167,6 +2167,50 @@ void page_unlock(struct page_info *page) - current_locked_page_set(NULL); - } - -+/* -+ * L3 table locks: -+ * -+ * Used for serialization in map_pages_to_xen() and modify_xen_mappings(). -+ * -+ * For Xen PT pages, the page->u.inuse.type_info is unused and it is safe to -+ * reuse the PGT_locked flag. This lock is taken only when we move down to L3 -+ * tables and below, since L4 (and above, for 5-level paging) is still globally -+ * protected by map_pgdir_lock. -+ * -+ * PV MMU update hypercalls call map_pages_to_xen while holding a page's page_lock(). -+ * This has two implications: -+ * - We cannot reuse reuse current_locked_page_* for debugging -+ * - To avoid the chance of deadlock, even for different pages, we -+ * must never grab page_lock() after grabbing l3t_lock(). This -+ * includes any page_lock()-based locks, such as -+ * mem_sharing_page_lock(). -+ * -+ * Also note that we grab the map_pgdir_lock while holding the -+ * l3t_lock(), so to avoid deadlock we must avoid grabbing them in -+ * reverse order. -+ */ -+static void l3t_lock(struct page_info *page) -+{ -+ unsigned long x, nx; -+ -+ do { -+ while ( (x = page->u.inuse.type_info) & PGT_locked ) -+ cpu_relax(); -+ nx = x | PGT_locked; -+ } while ( cmpxchg(&page->u.inuse.type_info, x, nx) != x ); -+} -+ -+static void l3t_unlock(struct page_info *page) -+{ -+ unsigned long x, nx, y = page->u.inuse.type_info; -+ -+ do { -+ x = y; -+ BUG_ON(!(x & PGT_locked)); -+ nx = x & ~PGT_locked; -+ } while ( (y = cmpxchg(&page->u.inuse.type_info, x, nx)) != x ); -+} -+ - #ifdef CONFIG_PV - /* - * PTE flags that a guest may change without re-validating the PTE. -@@ -5177,6 +5221,23 @@ l1_pgentry_t *virt_to_xen_l1e(unsigned long v) - flush_area_local((const void *)v, f) : \ - flush_area_all((const void *)v, f)) - -+#define L3T_INIT(page) (page) = ZERO_BLOCK_PTR -+ -+#define L3T_LOCK(page) \ -+ do { \ -+ if ( locking ) \ -+ l3t_lock(page); \ -+ } while ( false ) -+ -+#define L3T_UNLOCK(page) \ -+ do { \ -+ if ( locking && (page) != ZERO_BLOCK_PTR ) \ -+ { \ -+ l3t_unlock(page); \ -+ (page) = ZERO_BLOCK_PTR; \ -+ } \ -+ } while ( false ) -+ - int map_pages_to_xen( - unsigned long virt, - mfn_t mfn, -@@ -5188,6 +5249,7 @@ int map_pages_to_xen( - l1_pgentry_t *pl1e, ol1e; - unsigned int i; - int rc = -ENOMEM; -+ struct page_info *current_l3page; - - #define flush_flags(oldf) do { \ - unsigned int o_ = (oldf); \ -@@ -5203,13 +5265,20 @@ int map_pages_to_xen( - } \ - } while (0) - -+ L3T_INIT(current_l3page); -+ - while ( nr_mfns != 0 ) - { -- l3_pgentry_t ol3e, *pl3e = virt_to_xen_l3e(virt); -+ l3_pgentry_t *pl3e, ol3e; - -+ L3T_UNLOCK(current_l3page); -+ -+ pl3e = virt_to_xen_l3e(virt); - if ( !pl3e ) - goto out; - -+ current_l3page = virt_to_page(pl3e); -+ L3T_LOCK(current_l3page); - ol3e = *pl3e; - - if ( cpu_has_page1gb && -@@ -5543,6 +5612,7 @@ int map_pages_to_xen( - rc = 0; - - out: -+ L3T_UNLOCK(current_l3page); - return rc; - } - -@@ -5571,6 +5641,7 @@ int modify_xen_mappings(unsigned long s, unsigned long e, unsigned int nf) - unsigned int i; - unsigned long v = s; - int rc = -ENOMEM; -+ struct page_info *current_l3page; - - /* Set of valid PTE bits which may be altered. */ - #define FLAGS_MASK (_PAGE_NX|_PAGE_RW|_PAGE_PRESENT) -@@ -5579,11 +5650,22 @@ int modify_xen_mappings(unsigned long s, unsigned long e, unsigned int nf) - ASSERT(IS_ALIGNED(s, PAGE_SIZE)); - ASSERT(IS_ALIGNED(e, PAGE_SIZE)); - -+ L3T_INIT(current_l3page); -+ - while ( v < e ) - { -- l3_pgentry_t *pl3e = virt_to_xen_l3e(v); -+ l3_pgentry_t *pl3e; -+ -+ L3T_UNLOCK(current_l3page); - -- if ( !pl3e || !(l3e_get_flags(*pl3e) & _PAGE_PRESENT) ) -+ pl3e = virt_to_xen_l3e(v); -+ if ( !pl3e ) -+ goto out; -+ -+ current_l3page = virt_to_page(pl3e); -+ L3T_LOCK(current_l3page); -+ -+ if ( !(l3e_get_flags(*pl3e) & _PAGE_PRESENT) ) - { - /* Confirm the caller isn't trying to create new mappings. */ - ASSERT(!(nf & _PAGE_PRESENT)); -@@ -5801,9 +5883,13 @@ int modify_xen_mappings(unsigned long s, unsigned long e, unsigned int nf) - rc = 0; - - out: -+ L3T_UNLOCK(current_l3page); - return rc; - } - -+#undef L3T_LOCK -+#undef L3T_UNLOCK -+ - #undef flush_area - - int destroy_xen_mappings(unsigned long s, unsigned long e) --- -2.25.1 - diff --git a/system/xen/xsa/xsa346-4.13-1.patch b/system/xen/xsa/xsa346-4.13-1.patch deleted file mode 100644 index a32e658e8085d..0000000000000 --- a/system/xen/xsa/xsa346-4.13-1.patch +++ /dev/null @@ -1,50 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: IOMMU: suppress "iommu_dont_flush_iotlb" when about to free a page - -Deferring flushes to a single, wide range one - as is done when -handling XENMAPSPACE_gmfn_range - is okay only as long as -pages don't get freed ahead of the eventual flush. While the only -function setting the flag (xenmem_add_to_physmap()) suggests by its name -that it's only mapping new entries, in reality the way -xenmem_add_to_physmap_one() works means an unmap would happen not only -for the page being moved (but not freed) but, if the destination GFN is -populated, also for the page being displaced from that GFN. Collapsing -the two flushes for this GFN into just one (end even more so deferring -it to a batched invocation) is not correct. - -This is part of XSA-346. - -Fixes: cf95b2a9fd5a ("iommu: Introduce per cpu flag (iommu_dont_flush_iotlb) to avoid unnecessary iotlb... ") -Signed-off-by: Jan Beulich <jbeulich@suse.com> -Reviewed-by: Paul Durrant <paul@xen.org> -Acked-by: Julien Grall <jgrall@amazon.com> - ---- a/xen/common/memory.c -+++ b/xen/common/memory.c -@@ -292,6 +292,7 @@ int guest_remove_page(struct domain *d, - p2m_type_t p2mt; - #endif - mfn_t mfn; -+ bool *dont_flush_p, dont_flush; - int rc; - - #ifdef CONFIG_X86 -@@ -378,8 +379,18 @@ int guest_remove_page(struct domain *d, - return -ENXIO; - } - -+ /* -+ * Since we're likely to free the page below, we need to suspend -+ * xenmem_add_to_physmap()'s suppressing of IOMMU TLB flushes. -+ */ -+ dont_flush_p = &this_cpu(iommu_dont_flush_iotlb); -+ dont_flush = *dont_flush_p; -+ *dont_flush_p = false; -+ - rc = guest_physmap_remove_page(d, _gfn(gmfn), mfn, 0); - -+ *dont_flush_p = dont_flush; -+ - /* - * With the lack of an IOMMU on some platforms, domains with DMA-capable - * device must retrieve the same pfn when the hypercall populate_physmap diff --git a/system/xen/xsa/xsa346-4.13-2.patch b/system/xen/xsa/xsa346-4.13-2.patch deleted file mode 100644 index 6371b5c3db7d2..0000000000000 --- a/system/xen/xsa/xsa346-4.13-2.patch +++ /dev/null @@ -1,204 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: IOMMU: hold page ref until after deferred TLB flush - -When moving around a page via XENMAPSPACE_gmfn_range, deferring the TLB -flush for the "from" GFN range requires that the page remains allocated -to the guest until the TLB flush has actually occurred. Otherwise a -parallel hypercall to remove the page would only flush the TLB for the -GFN it has been moved to, but not the one is was mapped at originally. - -This is part of XSA-346. - -Fixes: cf95b2a9fd5a ("iommu: Introduce per cpu flag (iommu_dont_flush_iotlb) to avoid unnecessary iotlb... ") -Reported-by: Julien Grall <jgrall@amazon.com> -Signed-off-by: Jan Beulich <jbeulich@suse.com> -Acked-by: Julien Grall <jgrall@amazon.com> - ---- a/xen/arch/arm/mm.c -+++ b/xen/arch/arm/mm.c -@@ -1407,7 +1407,7 @@ void share_xen_page_with_guest(struct pa - int xenmem_add_to_physmap_one( - struct domain *d, - unsigned int space, -- union xen_add_to_physmap_batch_extra extra, -+ union add_to_physmap_extra extra, - unsigned long idx, - gfn_t gfn) - { -@@ -1480,10 +1480,6 @@ int xenmem_add_to_physmap_one( - break; - } - case XENMAPSPACE_dev_mmio: -- /* extra should be 0. Reserved for future use. */ -- if ( extra.res0 ) -- return -EOPNOTSUPP; -- - rc = map_dev_mmio_region(d, gfn, 1, _mfn(idx)); - return rc; - ---- a/xen/arch/x86/mm.c -+++ b/xen/arch/x86/mm.c -@@ -4617,7 +4617,7 @@ static int handle_iomem_range(unsigned l - int xenmem_add_to_physmap_one( - struct domain *d, - unsigned int space, -- union xen_add_to_physmap_batch_extra extra, -+ union add_to_physmap_extra extra, - unsigned long idx, - gfn_t gpfn) - { -@@ -4701,9 +4701,20 @@ int xenmem_add_to_physmap_one( - rc = guest_physmap_add_page(d, gpfn, mfn, PAGE_ORDER_4K); - - put_both: -- /* In the XENMAPSPACE_gmfn case, we took a ref of the gfn at the top. */ -+ /* -+ * In the XENMAPSPACE_gmfn case, we took a ref of the gfn at the top. -+ * We also may need to transfer ownership of the page reference to our -+ * caller. -+ */ - if ( space == XENMAPSPACE_gmfn ) -+ { - put_gfn(d, gfn); -+ if ( !rc && extra.ppage ) -+ { -+ *extra.ppage = page; -+ page = NULL; -+ } -+ } - - if ( page ) - put_page(page); ---- a/xen/common/memory.c -+++ b/xen/common/memory.c -@@ -814,13 +814,12 @@ int xenmem_add_to_physmap(struct domain - { - unsigned int done = 0; - long rc = 0; -- union xen_add_to_physmap_batch_extra extra; -+ union add_to_physmap_extra extra = {}; -+ struct page_info *pages[16]; - - ASSERT(paging_mode_translate(d)); - -- if ( xatp->space != XENMAPSPACE_gmfn_foreign ) -- extra.res0 = 0; -- else -+ if ( xatp->space == XENMAPSPACE_gmfn_foreign ) - extra.foreign_domid = DOMID_INVALID; - - if ( xatp->space != XENMAPSPACE_gmfn_range ) -@@ -835,7 +834,10 @@ int xenmem_add_to_physmap(struct domain - xatp->size -= start; - - if ( is_iommu_enabled(d) ) -+ { - this_cpu(iommu_dont_flush_iotlb) = 1; -+ extra.ppage = &pages[0]; -+ } - - while ( xatp->size > done ) - { -@@ -847,8 +849,12 @@ int xenmem_add_to_physmap(struct domain - xatp->idx++; - xatp->gpfn++; - -+ if ( extra.ppage ) -+ ++extra.ppage; -+ - /* Check for continuation if it's not the last iteration. */ -- if ( xatp->size > ++done && hypercall_preempt_check() ) -+ if ( (++done > ARRAY_SIZE(pages) && extra.ppage) || -+ (xatp->size > done && hypercall_preempt_check()) ) - { - rc = start + done; - break; -@@ -858,6 +864,7 @@ int xenmem_add_to_physmap(struct domain - if ( is_iommu_enabled(d) ) - { - int ret; -+ unsigned int i; - - this_cpu(iommu_dont_flush_iotlb) = 0; - -@@ -866,6 +873,15 @@ int xenmem_add_to_physmap(struct domain - if ( unlikely(ret) && rc >= 0 ) - rc = ret; - -+ /* -+ * Now that the IOMMU TLB flush was done for the original GFN, drop -+ * the page references. The 2nd flush below is fine to make later, as -+ * whoever removes the page again from its new GFN will have to do -+ * another flush anyway. -+ */ -+ for ( i = 0; i < done; ++i ) -+ put_page(pages[i]); -+ - ret = iommu_iotlb_flush(d, _dfn(xatp->gpfn - done), done, - IOMMU_FLUSHF_added | IOMMU_FLUSHF_modified); - if ( unlikely(ret) && rc >= 0 ) -@@ -879,6 +895,8 @@ static int xenmem_add_to_physmap_batch(s - struct xen_add_to_physmap_batch *xatpb, - unsigned int extent) - { -+ union add_to_physmap_extra extra = {}; -+ - if ( unlikely(xatpb->size < extent) ) - return -EILSEQ; - -@@ -890,6 +908,19 @@ static int xenmem_add_to_physmap_batch(s - !guest_handle_subrange_okay(xatpb->errs, extent, xatpb->size - 1) ) - return -EFAULT; - -+ switch ( xatpb->space ) -+ { -+ case XENMAPSPACE_dev_mmio: -+ /* res0 is reserved for future use. */ -+ if ( xatpb->u.res0 ) -+ return -EOPNOTSUPP; -+ break; -+ -+ case XENMAPSPACE_gmfn_foreign: -+ extra.foreign_domid = xatpb->u.foreign_domid; -+ break; -+ } -+ - while ( xatpb->size > extent ) - { - xen_ulong_t idx; -@@ -902,8 +933,7 @@ static int xenmem_add_to_physmap_batch(s - extent, 1)) ) - return -EFAULT; - -- rc = xenmem_add_to_physmap_one(d, xatpb->space, -- xatpb->u, -+ rc = xenmem_add_to_physmap_one(d, xatpb->space, extra, - idx, _gfn(gpfn)); - - if ( unlikely(__copy_to_guest_offset(xatpb->errs, extent, &rc, 1)) ) ---- a/xen/include/xen/mm.h -+++ b/xen/include/xen/mm.h -@@ -588,8 +588,22 @@ void scrub_one_page(struct page_info *); - &(d)->xenpage_list : &(d)->page_list) - #endif - -+union add_to_physmap_extra { -+ /* -+ * XENMAPSPACE_gmfn: When deferring TLB flushes, a page reference needs -+ * to be kept until after the flush, so the page can't get removed from -+ * the domain (and re-used for another purpose) beforehand. By passing -+ * non-NULL, the caller of xenmem_add_to_physmap_one() indicates it wants -+ * to have ownership of such a reference transferred in the success case. -+ */ -+ struct page_info **ppage; -+ -+ /* XENMAPSPACE_gmfn_foreign */ -+ domid_t foreign_domid; -+}; -+ - int xenmem_add_to_physmap_one(struct domain *d, unsigned int space, -- union xen_add_to_physmap_batch_extra extra, -+ union add_to_physmap_extra extra, - unsigned long idx, gfn_t gfn); - - int xenmem_add_to_physmap(struct domain *d, struct xen_add_to_physmap *xatp, diff --git a/system/xen/xsa/xsa347-4.13-1.patch b/system/xen/xsa/xsa347-4.13-1.patch deleted file mode 100644 index e9f31a151f016..0000000000000 --- a/system/xen/xsa/xsa347-4.13-1.patch +++ /dev/null @@ -1,149 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: AMD/IOMMU: convert amd_iommu_pte from struct to union - -This is to add a "raw" counterpart to the bitfield equivalent. Take the -opportunity and - - convert fields to bool / unsigned int, - - drop the naming of the reserved field, - - shorten the names of the ignored ones. - -This is part of XSA-347. - -Signed-off-by: Jan Beulich <jbeulich@suse.com> -Reviewed-by: Andrew Cooper <andrew.cooper3@citrix.com> -Reviewed-by: Paul Durrant <paul@xen.org> - ---- a/xen/drivers/passthrough/amd/iommu_map.c -+++ b/xen/drivers/passthrough/amd/iommu_map.c -@@ -38,7 +38,7 @@ static unsigned int pfn_to_pde_idx(unsig - static unsigned int clear_iommu_pte_present(unsigned long l1_mfn, - unsigned long dfn) - { -- struct amd_iommu_pte *table, *pte; -+ union amd_iommu_pte *table, *pte; - unsigned int flush_flags; - - table = map_domain_page(_mfn(l1_mfn)); -@@ -52,7 +52,7 @@ static unsigned int clear_iommu_pte_pres - return flush_flags; - } - --static unsigned int set_iommu_pde_present(struct amd_iommu_pte *pte, -+static unsigned int set_iommu_pde_present(union amd_iommu_pte *pte, - unsigned long next_mfn, - unsigned int next_level, bool iw, - bool ir) -@@ -87,7 +87,7 @@ static unsigned int set_iommu_pte_presen - int pde_level, - bool iw, bool ir) - { -- struct amd_iommu_pte *table, *pde; -+ union amd_iommu_pte *table, *pde; - unsigned int flush_flags; - - table = map_domain_page(_mfn(pt_mfn)); -@@ -178,7 +178,7 @@ void iommu_dte_set_guest_cr3(struct amd_ - static int iommu_pde_from_dfn(struct domain *d, unsigned long dfn, - unsigned long pt_mfn[], bool map) - { -- struct amd_iommu_pte *pde, *next_table_vaddr; -+ union amd_iommu_pte *pde, *next_table_vaddr; - unsigned long next_table_mfn; - unsigned int level; - struct page_info *table; -@@ -458,7 +458,7 @@ int __init amd_iommu_quarantine_init(str - unsigned long end_gfn = - 1ul << (DEFAULT_DOMAIN_ADDRESS_WIDTH - PAGE_SHIFT); - unsigned int level = amd_iommu_get_paging_mode(end_gfn); -- struct amd_iommu_pte *table; -+ union amd_iommu_pte *table; - - if ( hd->arch.root_table ) - { -@@ -489,7 +489,7 @@ int __init amd_iommu_quarantine_init(str - - for ( i = 0; i < PTE_PER_TABLE_SIZE; i++ ) - { -- struct amd_iommu_pte *pde = &table[i]; -+ union amd_iommu_pte *pde = &table[i]; - - /* - * PDEs are essentially a subset of PTEs, so this function ---- a/xen/drivers/passthrough/amd/pci_amd_iommu.c -+++ b/xen/drivers/passthrough/amd/pci_amd_iommu.c -@@ -390,7 +390,7 @@ static void deallocate_next_page_table(s - - static void deallocate_page_table(struct page_info *pg) - { -- struct amd_iommu_pte *table_vaddr; -+ union amd_iommu_pte *table_vaddr; - unsigned int index, level = PFN_ORDER(pg); - - PFN_ORDER(pg) = 0; -@@ -405,7 +405,7 @@ static void deallocate_page_table(struct - - for ( index = 0; index < PTE_PER_TABLE_SIZE; index++ ) - { -- struct amd_iommu_pte *pde = &table_vaddr[index]; -+ union amd_iommu_pte *pde = &table_vaddr[index]; - - if ( pde->mfn && pde->next_level && pde->pr ) - { -@@ -557,7 +557,7 @@ static void amd_dump_p2m_table_level(str - paddr_t gpa, int indent) - { - paddr_t address; -- struct amd_iommu_pte *table_vaddr; -+ const union amd_iommu_pte *table_vaddr; - int index; - - if ( level < 1 ) -@@ -573,7 +573,7 @@ static void amd_dump_p2m_table_level(str - - for ( index = 0; index < PTE_PER_TABLE_SIZE; index++ ) - { -- struct amd_iommu_pte *pde = &table_vaddr[index]; -+ const union amd_iommu_pte *pde = &table_vaddr[index]; - - if ( !(index % 2) ) - process_pending_softirqs(); ---- a/xen/include/asm-x86/hvm/svm/amd-iommu-defs.h -+++ b/xen/include/asm-x86/hvm/svm/amd-iommu-defs.h -@@ -465,20 +465,23 @@ union amd_iommu_x2apic_control { - #define IOMMU_PAGE_TABLE_U32_PER_ENTRY (IOMMU_PAGE_TABLE_ENTRY_SIZE / 4) - #define IOMMU_PAGE_TABLE_ALIGNMENT 4096 - --struct amd_iommu_pte { -- uint64_t pr:1; -- uint64_t ignored0:4; -- uint64_t a:1; -- uint64_t d:1; -- uint64_t ignored1:2; -- uint64_t next_level:3; -- uint64_t mfn:40; -- uint64_t reserved:7; -- uint64_t u:1; -- uint64_t fc:1; -- uint64_t ir:1; -- uint64_t iw:1; -- uint64_t ignored2:1; -+union amd_iommu_pte { -+ uint64_t raw; -+ struct { -+ bool pr:1; -+ unsigned int ign0:4; -+ bool a:1; -+ bool d:1; -+ unsigned int ign1:2; -+ unsigned int next_level:3; -+ uint64_t mfn:40; -+ unsigned int :7; -+ bool u:1; -+ bool fc:1; -+ bool ir:1; -+ bool iw:1; -+ unsigned int ign2:1; -+ }; - }; - - /* Paging modes */ diff --git a/system/xen/xsa/xsa347-4.13-2.patch b/system/xen/xsa/xsa347-4.13-2.patch deleted file mode 100644 index fbe7461636071..0000000000000 --- a/system/xen/xsa/xsa347-4.13-2.patch +++ /dev/null @@ -1,72 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: AMD/IOMMU: update live PTEs atomically - -Updating a live PTE bitfield by bitfield risks the compiler re-ordering -the individual updates as well as splitting individual updates into -multiple memory writes. Construct the new entry fully in a local -variable, do the check to determine the flushing needs on the thus -established new entry, and then write the new entry by a single insn. - -Similarly using memset() to clear a PTE is unsafe, as the order of -writes the function does is, at least in principle, undefined. - -This is part of XSA-347. - -Signed-off-by: Jan Beulich <jbeulich@suse.com> -Reviewed-by: Paul Durrant <paul@xen.org> - ---- a/xen/drivers/passthrough/amd/iommu_map.c -+++ b/xen/drivers/passthrough/amd/iommu_map.c -@@ -45,7 +45,7 @@ static unsigned int clear_iommu_pte_pres - pte = &table[pfn_to_pde_idx(dfn, 1)]; - - flush_flags = pte->pr ? IOMMU_FLUSHF_modified : 0; -- memset(pte, 0, sizeof(*pte)); -+ write_atomic(&pte->raw, 0); - - unmap_domain_page(table); - -@@ -57,26 +57,30 @@ static unsigned int set_iommu_pde_presen - unsigned int next_level, bool iw, - bool ir) - { -+ union amd_iommu_pte new = {}, old; - unsigned int flush_flags = IOMMU_FLUSHF_added; - -- if ( pte->pr && -- (pte->mfn != next_mfn || -- pte->iw != iw || -- pte->ir != ir || -- pte->next_level != next_level) ) -- flush_flags |= IOMMU_FLUSHF_modified; -- - /* - * FC bit should be enabled in PTE, this helps to solve potential - * issues with ATS devices - */ -- pte->fc = !next_level; -+ new.fc = !next_level; -+ -+ new.mfn = next_mfn; -+ new.iw = iw; -+ new.ir = ir; -+ new.next_level = next_level; -+ new.pr = true; -+ -+ old.raw = read_atomic(&pte->raw); -+ old.ign0 = 0; -+ old.ign1 = 0; -+ old.ign2 = 0; -+ -+ if ( old.pr && old.raw != new.raw ) -+ flush_flags |= IOMMU_FLUSHF_modified; - -- pte->mfn = next_mfn; -- pte->iw = iw; -- pte->ir = ir; -- pte->next_level = next_level; -- pte->pr = 1; -+ write_atomic(&pte->raw, new.raw); - - return flush_flags; - } diff --git a/system/xen/xsa/xsa347-4.13-3.patch b/system/xen/xsa/xsa347-4.13-3.patch deleted file mode 100644 index 90c8e66020c71..0000000000000 --- a/system/xen/xsa/xsa347-4.13-3.patch +++ /dev/null @@ -1,59 +0,0 @@ -From: Jan Beulich <jbeulich@suse.com> -Subject: AMD/IOMMU: ensure suitable ordering of DTE modifications - -DMA and interrupt translation should be enabled only after other -applicable DTE fields have been written. Similarly when disabling -translation or when moving a device between domains, translation should -first be disabled, before other entry fields get modified. Note however -that the "moving" aspect doesn't apply to the interrupt remapping side, -as domain specifics are maintained in the IRTEs here, not the DTE. We -also never disable interrupt remapping once it got enabled for a device -(the respective argument passed is always the immutable iommu_intremap). - -This is part of XSA-347. - -Signed-off-by: Jan Beulich <jbeulich@suse.com> -Reviewed-by: Paul Durrant <paul@xen.org> - ---- a/xen/drivers/passthrough/amd/iommu_map.c -+++ b/xen/drivers/passthrough/amd/iommu_map.c -@@ -107,11 +107,18 @@ void amd_iommu_set_root_page_table(struc - uint64_t root_ptr, uint16_t domain_id, - uint8_t paging_mode, bool valid) - { -+ if ( valid || dte->v ) -+ { -+ dte->tv = false; -+ dte->v = true; -+ smp_wmb(); -+ } - dte->domain_id = domain_id; - dte->pt_root = paddr_to_pfn(root_ptr); - dte->iw = true; - dte->ir = true; - dte->paging_mode = paging_mode; -+ smp_wmb(); - dte->tv = true; - dte->v = valid; - } -@@ -134,6 +141,7 @@ void amd_iommu_set_intremap_table( - } - - dte->ig = false; /* unmapped interrupts result in i/o page faults */ -+ smp_wmb(); - dte->iv = valid; - } - ---- a/xen/drivers/passthrough/amd/pci_amd_iommu.c -+++ b/xen/drivers/passthrough/amd/pci_amd_iommu.c -@@ -120,7 +120,10 @@ static void amd_iommu_setup_domain_devic - /* Undo what amd_iommu_disable_domain_device() may have done. */ - ivrs_dev = &get_ivrs_mappings(iommu->seg)[req_id]; - if ( dte->it_root ) -+ { - dte->int_ctl = IOMMU_DEV_TABLE_INT_CONTROL_TRANSLATED; -+ smp_wmb(); -+ } - dte->iv = iommu_intremap; - dte->ex = ivrs_dev->dte_allow_exclusion; - dte->sys_mgt = MASK_EXTR(ivrs_dev->device_flags, ACPI_IVHD_SYSTEM_MGMT); diff --git a/system/xen/xsa/xsa372-4.15-0001-xen-arm-Create-dom0less-domUs-earlier.patch b/system/xen/xsa/xsa372-4.15-0001-xen-arm-Create-dom0less-domUs-earlier.patch new file mode 100644 index 0000000000000..a21dba440c57b --- /dev/null +++ b/system/xen/xsa/xsa372-4.15-0001-xen-arm-Create-dom0less-domUs-earlier.patch @@ -0,0 +1,85 @@ +From b1e5a89f19d9919c3eae17ab9c6a663b0801ad9c Mon Sep 17 00:00:00 2001 +From: Julien Grall <jgrall@amazon.com> +Date: Mon, 17 May 2021 17:47:13 +0100 +Subject: [PATCH 1/2] xen/arm: Create dom0less domUs earlier + +In a follow-up patch we will need to unallocate the boot modules +before heap_init_late() is called. + +The modules will contain the domUs kernel and initramfs. Therefore Xen +will need to create extra domUs (used by dom0less) before heap_init_late(). + +This has two consequences on dom0less: + 1) Domains will not be unpaused as soon as they are created but + once all have been created. However, Xen doesn't guarantee an order + to unpause, so this is not something one could rely on. + + 2) The memory allocated for a domU will not be scrubbed anymore when an + admin select bootscrub=on. This is not something we advertised, but if + this is a concern we can introduce either force scrub for all domUs or + a per-domain flag in the DT. The behavior for bootscrub=off and + bootscrub=idle (default) has not changed. + +This is part of XSA-372 / CVE-2021-28693. + +Signed-off-by: Julien Grall <jgrall@amazon.com> +Reviewed-by: Jan Beulich <jbeulich@suse.com> +Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> +Tested-by: Stefano Stabellini <sstabellini@kernel.org> +--- + xen/arch/arm/domain_build.c | 2 -- + xen/arch/arm/setup.c | 11 ++++++----- + 2 files changed, 6 insertions(+), 7 deletions(-) + +diff --git a/xen/arch/arm/domain_build.c b/xen/arch/arm/domain_build.c +index 374bf655ee34..4203ddcca0e3 100644 +--- a/xen/arch/arm/domain_build.c ++++ b/xen/arch/arm/domain_build.c +@@ -2515,8 +2515,6 @@ void __init create_domUs(void) + + if ( construct_domU(d, node) != 0 ) + panic("Could not set up domain %s\n", dt_node_name(node)); +- +- domain_unpause_by_systemcontroller(d); + } + } + +diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c +index 2532ec973913..441e0e16e9f0 100644 +--- a/xen/arch/arm/setup.c ++++ b/xen/arch/arm/setup.c +@@ -804,7 +804,7 @@ void __init start_xen(unsigned long boot_phys_offset, + int cpus, i; + const char *cmdline; + struct bootmodule *xen_bootmodule; +- struct domain *dom0; ++ struct domain *dom0, *d; + struct xen_domctl_createdomain dom0_cfg = { + .flags = XEN_DOMCTL_CDF_hvm | XEN_DOMCTL_CDF_hap, + .max_evtchn_port = -1, +@@ -987,6 +987,9 @@ void __init start_xen(unsigned long boot_phys_offset, + if ( construct_dom0(dom0) != 0) + panic("Could not set up DOM0 guest OS\n"); + ++ if ( acpi_disabled ) ++ create_domUs(); ++ + heap_init_late(); + + init_trace_bufs(); +@@ -1000,10 +1003,8 @@ void __init start_xen(unsigned long boot_phys_offset, + + system_state = SYS_STATE_active; + +- if ( acpi_disabled ) +- create_domUs(); +- +- domain_unpause_by_systemcontroller(dom0); ++ for_each_domain( d ) ++ domain_unpause_by_systemcontroller(d); + + /* Switch on to the dynamically allocated stack for the idle vcpu + * since the static one we're running on is about to be freed. */ +-- +2.17.1 + diff --git a/system/xen/xsa/xsa372-4.15-0002-xen-arm-Boot-modules-should-always-be-scrubbed-if-bo.patch b/system/xen/xsa/xsa372-4.15-0002-xen-arm-Boot-modules-should-always-be-scrubbed-if-bo.patch new file mode 100644 index 0000000000000..9c322b18a5048 --- /dev/null +++ b/system/xen/xsa/xsa372-4.15-0002-xen-arm-Boot-modules-should-always-be-scrubbed-if-bo.patch @@ -0,0 +1,59 @@ +From 09bb28bdef3fb5e7d08bdd641601ca0c0d4d82b4 Mon Sep 17 00:00:00 2001 +From: Julien Grall <jgrall@amazon.com> +Date: Sat, 17 Apr 2021 17:38:28 +0100 +Subject: [PATCH 2/2] xen/arm: Boot modules should always be scrubbed if + bootscrub={on, idle} + +The function to initialize the pages (see init_heap_pages()) will request +scrub when the admin request idle bootscrub (default) and state == +SYS_STATE_active. When bootscrub=on, Xen will scrub any free pages in +heap_init_late(). + +Currently, the boot modules (e.g. kernels, initramfs) will be discarded/ +freed after heap_init_late() is called and system_state switched to +SYS_STATE_active. This means the pages associated with the boot modules +will not get scrubbed before getting re-purposed. + +If the memory is assigned to an untrusted domU, it may be able to +retrieve secrets from the modules. + +This is part of XSA-372 / CVE-2021-28693. + +Fixes: 1774e9b1df27 ("xen/arm: introduce create_domUs") +Signed-off-by: Julien Grall <jgrall@amazon.com> +Reviewed-by: Jan Beulich <jbeulich@suse.com> +Reviewed-by: Stefano Stabellini <sstabellini@kernel.org> +Tested-by: Stefano Stabellini <sstabellini@kernel.org> +--- + xen/arch/arm/setup.c | 8 ++++++-- + 1 file changed, 6 insertions(+), 2 deletions(-) + +diff --git a/xen/arch/arm/setup.c b/xen/arch/arm/setup.c +index 441e0e16e9f0..8afb78f2c985 100644 +--- a/xen/arch/arm/setup.c ++++ b/xen/arch/arm/setup.c +@@ -72,8 +72,6 @@ domid_t __read_mostly max_init_domid; + + static __used void init_done(void) + { +- discard_initial_modules(); +- + /* Must be done past setting system_state. */ + unregister_init_virtual_region(); + +@@ -990,6 +988,12 @@ void __init start_xen(unsigned long boot_phys_offset, + if ( acpi_disabled ) + create_domUs(); + ++ /* ++ * This needs to be called **before** heap_init_late() so modules ++ * will be scrubbed (unless suppressed). ++ */ ++ discard_initial_modules(); ++ + heap_init_late(); + + init_trace_bufs(); +-- +2.17.1 + diff --git a/system/xen/xsa/xsa373-4.15-1.patch b/system/xen/xsa/xsa373-4.15-1.patch new file mode 100644 index 0000000000000..ee5229a11c426 --- /dev/null +++ b/system/xen/xsa/xsa373-4.15-1.patch @@ -0,0 +1,120 @@ +From: Jan Beulich <jbeulich@suse.com> +Subject: VT-d: size qinval queue dynamically + +With the present synchronous model, we need two slots for every +operation (the operation itself and a wait descriptor). There can be +one such pair of requests pending per CPU. To ensure that under all +normal circumstances a slot is always available when one is requested, +size the queue ring according to the number of present CPUs. + +This is part of XSA-373 / CVE-2021-28692. + +Signed-off-by: Jan Beulich <jbeulich@suse.com> +Reviewed-by: Paul Durrant <paul@xen.org> + +--- a/xen/drivers/passthrough/vtd/iommu.h ++++ b/xen/drivers/passthrough/vtd/iommu.h +@@ -450,17 +450,9 @@ struct qinval_entry { + }q; + }; + +-/* Order of queue invalidation pages(max is 8) */ +-#define QINVAL_PAGE_ORDER 2 +- +-#define QINVAL_ARCH_PAGE_ORDER (QINVAL_PAGE_ORDER + PAGE_SHIFT_4K - PAGE_SHIFT) +-#define QINVAL_ARCH_PAGE_NR ( QINVAL_ARCH_PAGE_ORDER < 0 ? \ +- 1 : \ +- 1 << QINVAL_ARCH_PAGE_ORDER ) +- + /* Each entry is 16 bytes, so 2^8 entries per page */ + #define QINVAL_ENTRY_ORDER ( PAGE_SHIFT - 4 ) +-#define QINVAL_ENTRY_NR (1 << (QINVAL_PAGE_ORDER + 8)) ++#define QINVAL_MAX_ENTRY_NR (1u << (7 + QINVAL_ENTRY_ORDER)) + + /* Status data flag */ + #define QINVAL_STAT_INIT 0 +--- a/xen/drivers/passthrough/vtd/qinval.c ++++ b/xen/drivers/passthrough/vtd/qinval.c +@@ -31,6 +31,9 @@ + + #define VTD_QI_TIMEOUT 1 + ++static unsigned int __read_mostly qi_pg_order; ++static unsigned int __read_mostly qi_entry_nr; ++ + static int __must_check invalidate_sync(struct vtd_iommu *iommu); + + static void print_qi_regs(struct vtd_iommu *iommu) +@@ -55,7 +58,7 @@ static unsigned int qinval_next_index(st + tail >>= QINVAL_INDEX_SHIFT; + + /* (tail+1 == head) indicates a full queue, wait for HW */ +- while ( ( tail + 1 ) % QINVAL_ENTRY_NR == ++ while ( ((tail + 1) & (qi_entry_nr - 1)) == + ( dmar_readq(iommu->reg, DMAR_IQH_REG) >> QINVAL_INDEX_SHIFT ) ) + cpu_relax(); + +@@ -68,7 +71,7 @@ static void qinval_update_qtail(struct v + + /* Need hold register lock when update tail */ + ASSERT( spin_is_locked(&iommu->register_lock) ); +- val = (index + 1) % QINVAL_ENTRY_NR; ++ val = (index + 1) & (qi_entry_nr - 1); + dmar_writeq(iommu->reg, DMAR_IQT_REG, (val << QINVAL_INDEX_SHIFT)); + } + +@@ -403,8 +406,28 @@ int enable_qinval(struct vtd_iommu *iomm + + if ( iommu->qinval_maddr == 0 ) + { +- iommu->qinval_maddr = alloc_pgtable_maddr(QINVAL_ARCH_PAGE_NR, +- iommu->node); ++ if ( !qi_entry_nr ) ++ { ++ /* ++ * With the present synchronous model, we need two slots for every ++ * operation (the operation itself and a wait descriptor). There ++ * can be one such pair of requests pending per CPU. One extra ++ * entry is needed as the ring is considered full when there's ++ * only one entry left. ++ */ ++ BUILD_BUG_ON(CONFIG_NR_CPUS * 2 >= QINVAL_MAX_ENTRY_NR); ++ qi_pg_order = get_order_from_bytes((num_present_cpus() * 2 + 1) << ++ (PAGE_SHIFT - ++ QINVAL_ENTRY_ORDER)); ++ qi_entry_nr = 1u << (qi_pg_order + QINVAL_ENTRY_ORDER); ++ ++ dprintk(XENLOG_INFO VTDPREFIX, ++ "QI: using %u-entry ring(s)\n", qi_entry_nr); ++ } ++ ++ iommu->qinval_maddr = ++ alloc_pgtable_maddr(qi_entry_nr >> QINVAL_ENTRY_ORDER, ++ iommu->node); + if ( iommu->qinval_maddr == 0 ) + { + dprintk(XENLOG_WARNING VTDPREFIX, +@@ -418,15 +441,16 @@ int enable_qinval(struct vtd_iommu *iomm + + spin_lock_irqsave(&iommu->register_lock, flags); + +- /* Setup Invalidation Queue Address(IQA) register with the +- * address of the page we just allocated. QS field at +- * bits[2:0] to indicate size of queue is one 4KB page. +- * That's 256 entries. Queued Head (IQH) and Queue Tail (IQT) +- * registers are automatically reset to 0 with write +- * to IQA register. ++ /* ++ * Setup Invalidation Queue Address (IQA) register with the address of the ++ * pages we just allocated. The QS field at bits[2:0] indicates the size ++ * (page order) of the queue. ++ * ++ * Queued Head (IQH) and Queue Tail (IQT) registers are automatically ++ * reset to 0 with write to IQA register. + */ + dmar_writeq(iommu->reg, DMAR_IQA_REG, +- iommu->qinval_maddr | QINVAL_PAGE_ORDER); ++ iommu->qinval_maddr | qi_pg_order); + + dmar_writeq(iommu->reg, DMAR_IQT_REG, 0); + diff --git a/system/xen/xsa/xsa373-4.15-2.patch b/system/xen/xsa/xsa373-4.15-2.patch new file mode 100644 index 0000000000000..d61a3b42bf387 --- /dev/null +++ b/system/xen/xsa/xsa373-4.15-2.patch @@ -0,0 +1,102 @@ +From: Jan Beulich <jbeulich@suse.com> +Subject: AMD/IOMMU: size command buffer dynamically + +With the present synchronous model, we need two slots for every +operation (the operation itself and a wait command). There can be one +such pair of commands pending per CPU. To ensure that under all normal +circumstances a slot is always available when one is requested, size the +command ring according to the number of present CPUs. + +This is part of XSA-373 / CVE-2021-28692. + +Signed-off-by: Jan Beulich <jbeulich@suse.com> +Reviewed-by: Paul Durrant <paul@xen.org> + +--- a/xen/drivers/passthrough/amd/iommu-defs.h ++++ b/xen/drivers/passthrough/amd/iommu-defs.h +@@ -20,9 +20,6 @@ + #ifndef AMD_IOMMU_DEFS_H + #define AMD_IOMMU_DEFS_H + +-/* IOMMU Command Buffer entries: in power of 2 increments, minimum of 256 */ +-#define IOMMU_CMD_BUFFER_DEFAULT_ENTRIES 512 +- + /* IOMMU Event Log entries: in power of 2 increments, minimum of 256 */ + #define IOMMU_EVENT_LOG_DEFAULT_ENTRIES 512 + +@@ -164,8 +161,8 @@ struct amd_iommu_dte { + #define IOMMU_CMD_BUFFER_LENGTH_MASK 0x0F000000 + #define IOMMU_CMD_BUFFER_LENGTH_SHIFT 24 + +-#define IOMMU_CMD_BUFFER_ENTRY_SIZE 16 +-#define IOMMU_CMD_BUFFER_POWER_OF2_ENTRIES_PER_PAGE 8 ++#define IOMMU_CMD_BUFFER_ENTRY_ORDER 4 ++#define IOMMU_CMD_BUFFER_MAX_ENTRIES (1u << 15) + + #define IOMMU_CMD_OPCODE_MASK 0xF0000000 + #define IOMMU_CMD_OPCODE_SHIFT 28 +--- a/xen/drivers/passthrough/amd/iommu_cmd.c ++++ b/xen/drivers/passthrough/amd/iommu_cmd.c +@@ -24,7 +24,7 @@ static int queue_iommu_command(struct am + { + uint32_t tail, head; + +- tail = iommu->cmd_buffer.tail + IOMMU_CMD_BUFFER_ENTRY_SIZE; ++ tail = iommu->cmd_buffer.tail + sizeof(cmd_entry_t); + if ( tail == iommu->cmd_buffer.size ) + tail = 0; + +@@ -33,7 +33,7 @@ static int queue_iommu_command(struct am + if ( head != tail ) + { + memcpy(iommu->cmd_buffer.buffer + iommu->cmd_buffer.tail, +- cmd, IOMMU_CMD_BUFFER_ENTRY_SIZE); ++ cmd, sizeof(cmd_entry_t)); + + iommu->cmd_buffer.tail = tail; + return 1; +--- a/xen/drivers/passthrough/amd/iommu_init.c ++++ b/xen/drivers/passthrough/amd/iommu_init.c +@@ -118,7 +118,7 @@ static void register_iommu_cmd_buffer_in + writel(entry, iommu->mmio_base + IOMMU_CMD_BUFFER_BASE_LOW_OFFSET); + + power_of2_entries = get_order_from_bytes(iommu->cmd_buffer.size) + +- IOMMU_CMD_BUFFER_POWER_OF2_ENTRIES_PER_PAGE; ++ PAGE_SHIFT - IOMMU_CMD_BUFFER_ENTRY_ORDER; + + entry = 0; + iommu_set_addr_hi_to_reg(&entry, addr_hi); +@@ -1018,9 +1018,31 @@ static void *__init allocate_ring_buffer + static void * __init allocate_cmd_buffer(struct amd_iommu *iommu) + { + /* allocate 'command buffer' in power of 2 increments of 4K */ ++ static unsigned int __read_mostly nr_ents; ++ ++ if ( !nr_ents ) ++ { ++ unsigned int order; ++ ++ /* ++ * With the present synchronous model, we need two slots for every ++ * operation (the operation itself and a wait command). There can be ++ * one such pair of requests pending per CPU. One extra entry is ++ * needed as the ring is considered full when there's only one entry ++ * left. ++ */ ++ BUILD_BUG_ON(CONFIG_NR_CPUS * 2 >= IOMMU_CMD_BUFFER_MAX_ENTRIES); ++ order = get_order_from_bytes((num_present_cpus() * 2 + 1) << ++ IOMMU_CMD_BUFFER_ENTRY_ORDER); ++ nr_ents = 1u << (order + PAGE_SHIFT - IOMMU_CMD_BUFFER_ENTRY_ORDER); ++ ++ AMD_IOMMU_DEBUG("using %u-entry cmd ring(s)\n", nr_ents); ++ } ++ ++ BUILD_BUG_ON(sizeof(cmd_entry_t) != (1u << IOMMU_CMD_BUFFER_ENTRY_ORDER)); ++ + return allocate_ring_buffer(&iommu->cmd_buffer, sizeof(cmd_entry_t), +- IOMMU_CMD_BUFFER_DEFAULT_ENTRIES, +- "Command Buffer", false); ++ nr_ents, "Command Buffer", false); + } + + static void * __init allocate_event_log(struct amd_iommu *iommu) diff --git a/system/xen/xsa/xsa373-4.15-3.patch b/system/xen/xsa/xsa373-4.15-3.patch new file mode 100644 index 0000000000000..c7ddf5d6441ce --- /dev/null +++ b/system/xen/xsa/xsa373-4.15-3.patch @@ -0,0 +1,163 @@ +From: Jan Beulich <jbeulich@suse.com> +Subject: VT-d: eliminate flush related timeouts + +Leaving an in-progress operation pending when it appears to take too +long is problematic: If e.g. a QI command completed later, the write to +the "poll slot" may instead be understood to signal a subsequently +started command's completion. Also our accounting of the timeout period +was actually wrong: We included the time it took for the command to +actually make it to the front of the queue, which could be heavily +affected by guests other than the one for which the flush is being +performed. + +Do away with all timeout detection on all flush related code paths. +Log excessively long processing times (with a progressive threshold) to +have some indication of problems in this area. + +Additionally log (once) if qinval_next_index() didn't immediately find +an available slot. Together with the earlier change sizing the queue(s) +dynamically, we should now have a guarantee that with our fully +synchronous model any demand for slots can actually be satisfied. + +This is part of XSA-373 / CVE-2021-28692. + +Signed-off-by: Jan Beulich <jbeulich@suse.com> +Reviewed-by: Paul Durrant <paul@xen.org> + +--- a/xen/drivers/passthrough/vtd/dmar.h ++++ b/xen/drivers/passthrough/vtd/dmar.h +@@ -127,6 +127,34 @@ do { + } \ + } while (0) + ++#define IOMMU_FLUSH_WAIT(what, iommu, offset, op, cond, sts) \ ++do { \ ++ static unsigned int __read_mostly threshold = 1; \ ++ s_time_t start = NOW(); \ ++ s_time_t timeout = start + DMAR_OPERATION_TIMEOUT * threshold; \ ++ \ ++ for ( ; ; ) \ ++ { \ ++ sts = op(iommu->reg, offset); \ ++ if ( cond ) \ ++ break; \ ++ if ( timeout && NOW() > timeout ) \ ++ { \ ++ threshold |= threshold << 1; \ ++ printk(XENLOG_WARNING VTDPREFIX \ ++ " IOMMU#%u: %s flush taking too long\n", \ ++ iommu->index, what); \ ++ timeout = 0; \ ++ } \ ++ cpu_relax(); \ ++ } \ ++ \ ++ if ( !timeout ) \ ++ printk(XENLOG_WARNING VTDPREFIX \ ++ " IOMMU#%u: %s flush took %lums\n", \ ++ iommu->index, what, (NOW() - start) / 10000000); \ ++} while ( false ) ++ + int vtd_hw_check(void); + void disable_pmr(struct vtd_iommu *iommu); + int is_igd_drhd(struct acpi_drhd_unit *drhd); +--- a/xen/drivers/passthrough/vtd/iommu.c ++++ b/xen/drivers/passthrough/vtd/iommu.c +@@ -373,8 +373,8 @@ static void iommu_flush_write_buffer(str + dmar_writel(iommu->reg, DMAR_GCMD_REG, val | DMA_GCMD_WBF); + + /* Make sure hardware complete it */ +- IOMMU_WAIT_OP(iommu, DMAR_GSTS_REG, dmar_readl, +- !(val & DMA_GSTS_WBFS), val); ++ IOMMU_FLUSH_WAIT("write buffer", iommu, DMAR_GSTS_REG, dmar_readl, ++ !(val & DMA_GSTS_WBFS), val); + + spin_unlock_irqrestore(&iommu->register_lock, flags); + } +@@ -423,8 +423,8 @@ int vtd_flush_context_reg(struct vtd_iom + dmar_writeq(iommu->reg, DMAR_CCMD_REG, val); + + /* Make sure hardware complete it */ +- IOMMU_WAIT_OP(iommu, DMAR_CCMD_REG, dmar_readq, +- !(val & DMA_CCMD_ICC), val); ++ IOMMU_FLUSH_WAIT("context", iommu, DMAR_CCMD_REG, dmar_readq, ++ !(val & DMA_CCMD_ICC), val); + + spin_unlock_irqrestore(&iommu->register_lock, flags); + /* flush context entry will implicitly flush write buffer */ +@@ -501,8 +501,8 @@ int vtd_flush_iotlb_reg(struct vtd_iommu + dmar_writeq(iommu->reg, tlb_offset + 8, val); + + /* Make sure hardware complete it */ +- IOMMU_WAIT_OP(iommu, (tlb_offset + 8), dmar_readq, +- !(val & DMA_TLB_IVT), val); ++ IOMMU_FLUSH_WAIT("iotlb", iommu, (tlb_offset + 8), dmar_readq, ++ !(val & DMA_TLB_IVT), val); + spin_unlock_irqrestore(&iommu->register_lock, flags); + + /* check IOTLB invalidation granularity */ +--- a/xen/drivers/passthrough/vtd/qinval.c ++++ b/xen/drivers/passthrough/vtd/qinval.c +@@ -29,8 +29,6 @@ + #include "extern.h" + #include "../ats.h" + +-#define VTD_QI_TIMEOUT 1 +- + static unsigned int __read_mostly qi_pg_order; + static unsigned int __read_mostly qi_entry_nr; + +@@ -60,7 +58,11 @@ static unsigned int qinval_next_index(st + /* (tail+1 == head) indicates a full queue, wait for HW */ + while ( ((tail + 1) & (qi_entry_nr - 1)) == + ( dmar_readq(iommu->reg, DMAR_IQH_REG) >> QINVAL_INDEX_SHIFT ) ) ++ { ++ printk_once(XENLOG_ERR VTDPREFIX " IOMMU#%u: no QI slot available\n", ++ iommu->index); + cpu_relax(); ++ } + + return tail; + } +@@ -180,23 +182,32 @@ static int __must_check queue_invalidate + /* Now we don't support interrupt method */ + if ( sw ) + { +- s_time_t timeout; +- +- /* In case all wait descriptor writes to same addr with same data */ +- timeout = NOW() + MILLISECS(flush_dev_iotlb ? +- iommu_dev_iotlb_timeout : VTD_QI_TIMEOUT); ++ static unsigned int __read_mostly threshold = 1; ++ s_time_t start = NOW(); ++ s_time_t timeout = start + (flush_dev_iotlb ++ ? iommu_dev_iotlb_timeout ++ : 100) * MILLISECS(threshold); + + while ( ACCESS_ONCE(*this_poll_slot) != QINVAL_STAT_DONE ) + { +- if ( NOW() > timeout ) ++ if ( timeout && NOW() > timeout ) + { +- print_qi_regs(iommu); ++ threshold |= threshold << 1; + printk(XENLOG_WARNING VTDPREFIX +- " Queue invalidate wait descriptor timed out\n"); +- return -ETIMEDOUT; ++ " IOMMU#%u: QI%s wait descriptor taking too long\n", ++ iommu->index, flush_dev_iotlb ? " dev" : ""); ++ print_qi_regs(iommu); ++ timeout = 0; + } + cpu_relax(); + } ++ ++ if ( !timeout ) ++ printk(XENLOG_WARNING VTDPREFIX ++ " IOMMU#%u: QI%s wait descriptor took %lums\n", ++ iommu->index, flush_dev_iotlb ? " dev" : "", ++ (NOW() - start) / 10000000); ++ + return 0; + } + diff --git a/system/xen/xsa/xsa373-4.15-4.patch b/system/xen/xsa/xsa373-4.15-4.patch new file mode 100644 index 0000000000000..17592cbf2d049 --- /dev/null +++ b/system/xen/xsa/xsa373-4.15-4.patch @@ -0,0 +1,79 @@ +From: Jan Beulich <jbeulich@suse.com> +Subject: AMD/IOMMU: wait for command slot to be available + +No caller cared about send_iommu_command() indicating unavailability of +a slot. Hence if a sufficient number prior commands timed out, we did +blindly assume that the requested command was submitted to the IOMMU +when really it wasn't. This could mean both a hanging system (waiting +for a command to complete that was never seen by the IOMMU) or blindly +propagating success back to callers, making them believe they're fine +to e.g. free previously unmapped pages. + +Fold the three involved functions into one, add spin waiting for an +available slot along the lines of VT-d's qinval_next_index(), and as a +consequence drop all error indicator return types/values. + +This is part of XSA-373 / CVE-2021-28692. + +Signed-off-by: Jan Beulich <jbeulich@suse.com> +Reviewed-by: Paul Durrant <paul@xen.org> + +--- a/xen/drivers/passthrough/amd/iommu_cmd.c ++++ b/xen/drivers/passthrough/amd/iommu_cmd.c +@@ -20,43 +20,30 @@ + #include "iommu.h" + #include "../ats.h" + +-static int queue_iommu_command(struct amd_iommu *iommu, u32 cmd[]) ++static void send_iommu_command(struct amd_iommu *iommu, ++ const uint32_t cmd[4]) + { +- uint32_t tail, head; ++ uint32_t tail; + + tail = iommu->cmd_buffer.tail + sizeof(cmd_entry_t); + if ( tail == iommu->cmd_buffer.size ) + tail = 0; + +- head = readl(iommu->mmio_base + +- IOMMU_CMD_BUFFER_HEAD_OFFSET) & IOMMU_RING_BUFFER_PTR_MASK; +- if ( head != tail ) ++ while ( tail == (readl(iommu->mmio_base + ++ IOMMU_CMD_BUFFER_HEAD_OFFSET) & ++ IOMMU_RING_BUFFER_PTR_MASK) ) + { +- memcpy(iommu->cmd_buffer.buffer + iommu->cmd_buffer.tail, +- cmd, sizeof(cmd_entry_t)); +- +- iommu->cmd_buffer.tail = tail; +- return 1; ++ printk_once(XENLOG_ERR "AMD IOMMU %pp: no cmd slot available\n", ++ &PCI_SBDF2(iommu->seg, iommu->bdf)); ++ cpu_relax(); + } + +- return 0; +-} +- +-static void commit_iommu_command_buffer(struct amd_iommu *iommu) +-{ +- writel(iommu->cmd_buffer.tail, +- iommu->mmio_base + IOMMU_CMD_BUFFER_TAIL_OFFSET); +-} ++ memcpy(iommu->cmd_buffer.buffer + iommu->cmd_buffer.tail, ++ cmd, sizeof(cmd_entry_t)); + +-static int send_iommu_command(struct amd_iommu *iommu, u32 cmd[]) +-{ +- if ( queue_iommu_command(iommu, cmd) ) +- { +- commit_iommu_command_buffer(iommu); +- return 1; +- } ++ iommu->cmd_buffer.tail = tail; + +- return 0; ++ writel(tail, iommu->mmio_base + IOMMU_CMD_BUFFER_TAIL_OFFSET); + } + + static void flush_command_buffer(struct amd_iommu *iommu) diff --git a/system/xen/xsa/xsa373-4.15-5.patch b/system/xen/xsa/xsa373-4.15-5.patch new file mode 100644 index 0000000000000..0c6b1ea7c5e93 --- /dev/null +++ b/system/xen/xsa/xsa373-4.15-5.patch @@ -0,0 +1,141 @@ +From: Jan Beulich <jbeulich@suse.com> +Subject: AMD/IOMMU: drop command completion timeout + +First and foremost - such timeouts were not signaled to callers, making +them believe they're fine to e.g. free previously unmapped pages. + +Mirror VT-d's behavior: A fixed number of loop iterations is not a +suitable way to detect timeouts in an environment (CPU and bus speeds) +independent manner anyway. Furthermore, leaving an in-progress operation +pending when it appears to take too long is problematic: If a command +completed later, the signaling of its completion may instead be +understood to signal a subsequently started command's completion. + +Log excessively long processing times (with a progressive threshold) to +have some indication of problems in this area. Allow callers to specify +a non-default timeout bias for this logging, using the same values as +VT-d does, which in particular means a (by default) much larger value +for device IO TLB invalidation. + +This is part of XSA-373 / CVE-2021-28692. + +Signed-off-by: Jan Beulich <jbeulich@suse.com> +Reviewed-by: Paul Durrant <paul@xen.org> + +--- a/xen/drivers/passthrough/amd/iommu_cmd.c ++++ b/xen/drivers/passthrough/amd/iommu_cmd.c +@@ -46,10 +46,12 @@ static void send_iommu_command(struct am + writel(tail, iommu->mmio_base + IOMMU_CMD_BUFFER_TAIL_OFFSET); + } + +-static void flush_command_buffer(struct amd_iommu *iommu) ++static void flush_command_buffer(struct amd_iommu *iommu, ++ unsigned int timeout_base) + { +- unsigned int cmd[4], status, loop_count; +- bool comp_wait; ++ uint32_t cmd[4]; ++ s_time_t start, timeout; ++ static unsigned int __read_mostly threshold = 1; + + /* RW1C 'ComWaitInt' in status register */ + writel(IOMMU_STATUS_COMP_WAIT_INT, +@@ -65,22 +67,29 @@ static void flush_command_buffer(struct + IOMMU_COMP_WAIT_I_FLAG_SHIFT, &cmd[0]); + send_iommu_command(iommu, cmd); + +- /* Make loop_count long enough for polling completion wait bit */ +- loop_count = 1000; +- do { +- status = readl(iommu->mmio_base + IOMMU_STATUS_MMIO_OFFSET); +- comp_wait = status & IOMMU_STATUS_COMP_WAIT_INT; +- --loop_count; +- } while ( !comp_wait && loop_count ); +- +- if ( comp_wait ) ++ start = NOW(); ++ timeout = start + (timeout_base ?: 100) * MILLISECS(threshold); ++ while ( !(readl(iommu->mmio_base + IOMMU_STATUS_MMIO_OFFSET) & ++ IOMMU_STATUS_COMP_WAIT_INT) ) + { +- /* RW1C 'ComWaitInt' in status register */ +- writel(IOMMU_STATUS_COMP_WAIT_INT, +- iommu->mmio_base + IOMMU_STATUS_MMIO_OFFSET); +- return; ++ if ( timeout && NOW() > timeout ) ++ { ++ threshold |= threshold << 1; ++ printk(XENLOG_WARNING ++ "AMD IOMMU %pp: %scompletion wait taking too long\n", ++ &PCI_SBDF2(iommu->seg, iommu->bdf), ++ timeout_base ? "iotlb " : ""); ++ timeout = 0; ++ } ++ cpu_relax(); + } +- AMD_IOMMU_DEBUG("Warning: ComWaitInt bit did not assert!\n"); ++ ++ if ( !timeout ) ++ printk(XENLOG_WARNING ++ "AMD IOMMU %pp: %scompletion wait took %lums\n", ++ &PCI_SBDF2(iommu->seg, iommu->bdf), ++ timeout_base ? "iotlb " : "", ++ (NOW() - start) / 10000000); + } + + /* Build low level iommu command messages */ +@@ -291,7 +300,7 @@ void amd_iommu_flush_iotlb(u8 devfn, con + /* send INVALIDATE_IOTLB_PAGES command */ + spin_lock_irqsave(&iommu->lock, flags); + invalidate_iotlb_pages(iommu, maxpend, 0, queueid, daddr, req_id, order); +- flush_command_buffer(iommu); ++ flush_command_buffer(iommu, iommu_dev_iotlb_timeout); + spin_unlock_irqrestore(&iommu->lock, flags); + } + +@@ -328,7 +337,7 @@ static void _amd_iommu_flush_pages(struc + { + spin_lock_irqsave(&iommu->lock, flags); + invalidate_iommu_pages(iommu, daddr, dom_id, order); +- flush_command_buffer(iommu); ++ flush_command_buffer(iommu, 0); + spin_unlock_irqrestore(&iommu->lock, flags); + } + +@@ -352,7 +361,7 @@ void amd_iommu_flush_device(struct amd_i + ASSERT( spin_is_locked(&iommu->lock) ); + + invalidate_dev_table_entry(iommu, bdf); +- flush_command_buffer(iommu); ++ flush_command_buffer(iommu, 0); + } + + void amd_iommu_flush_intremap(struct amd_iommu *iommu, uint16_t bdf) +@@ -360,7 +369,7 @@ void amd_iommu_flush_intremap(struct amd + ASSERT( spin_is_locked(&iommu->lock) ); + + invalidate_interrupt_table(iommu, bdf); +- flush_command_buffer(iommu); ++ flush_command_buffer(iommu, 0); + } + + void amd_iommu_flush_all_caches(struct amd_iommu *iommu) +@@ -368,7 +377,7 @@ void amd_iommu_flush_all_caches(struct a + ASSERT( spin_is_locked(&iommu->lock) ); + + invalidate_iommu_all(iommu); +- flush_command_buffer(iommu); ++ flush_command_buffer(iommu, 0); + } + + void amd_iommu_send_guest_cmd(struct amd_iommu *iommu, u32 cmd[]) +@@ -378,7 +387,8 @@ void amd_iommu_send_guest_cmd(struct amd + spin_lock_irqsave(&iommu->lock, flags); + + send_iommu_command(iommu, cmd); +- flush_command_buffer(iommu); ++ /* TBD: Timeout selection may require peeking into cmd[]. */ ++ flush_command_buffer(iommu, 0); + + spin_unlock_irqrestore(&iommu->lock, flags); + } diff --git a/system/xen/xsa/xsa375.patch b/system/xen/xsa/xsa375.patch new file mode 100644 index 0000000000000..aa2e5ad4674f9 --- /dev/null +++ b/system/xen/xsa/xsa375.patch @@ -0,0 +1,50 @@ +From: Andrew Cooper <andrew.cooper3@citrix.com> +Subject: x86/spec-ctrl: Protect against Speculative Code Store Bypass + +Modern x86 processors have far-better-than-architecturally-guaranteed self +modifying code detection. Typically, when a write hits an instruction in +flight, a Machine Clear occurs to flush stale content in the frontend and +backend. + +For self modifying code, before a write which hits an instruction in flight +retires, the frontend can speculatively decode and execute the old instruction +stream. Speculation of this form can suffer from type confusion in registers, +and potentially leak data. + +Furthermore, updates are typically byte-wise, rather than atomic. Depending +on timing, speculation can race ahead multiple times between individual +writes, and execute the transiently-malformed instruction stream. + +Xen has stubs which are used in certain cases for emulation purposes. Inhibit +speculation between updating the stub and executing it. + +This is XSA-375 / CVE-2021-0089. + +Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> +Reviewed-by: Jan Beulich <jbeulich@suse.com> + +diff --git a/xen/arch/x86/pv/emul-priv-op.c b/xen/arch/x86/pv/emul-priv-op.c +index 8889509d2a..11467a1e3a 100644 +--- a/xen/arch/x86/pv/emul-priv-op.c ++++ b/xen/arch/x86/pv/emul-priv-op.c +@@ -138,6 +138,8 @@ static io_emul_stub_t *io_emul_stub_setup(struct priv_op_ctxt *ctxt, u8 opcode, + /* Runtime confirmation that we haven't clobbered an adjacent stub. */ + BUG_ON(STUB_BUF_SIZE / 2 < (p - ctxt->io_emul_stub)); + ++ block_speculation(); /* SCSB */ ++ + /* Handy function-typed pointer to the stub. */ + return (void *)stub_va; + +diff --git a/xen/arch/x86/x86_emulate/x86_emulate.c b/xen/arch/x86/x86_emulate/x86_emulate.c +index c25d88d0d8..f42ff2a837 100644 +--- a/xen/arch/x86/x86_emulate/x86_emulate.c ++++ b/xen/arch/x86/x86_emulate/x86_emulate.c +@@ -1257,6 +1257,7 @@ static inline int mkec(uint8_t e, int32_t ec, ...) + # define invoke_stub(pre, post, constraints...) do { \ + stub_exn.info = (union stub_exception_token) { .raw = ~0 }; \ + stub_exn.line = __LINE__; /* Utility outweighs livepatching cost */ \ ++ block_speculation(); /* SCSB */ \ + asm volatile ( pre "\n\tINDIRECT_CALL %[stub]\n\t" post "\n" \ + ".Lret%=:\n\t" \ + ".pushsection .fixup,\"ax\"\n" \ diff --git a/system/xen/xsa/xsa377.patch b/system/xen/xsa/xsa377.patch new file mode 100644 index 0000000000000..1a1887b60e09c --- /dev/null +++ b/system/xen/xsa/xsa377.patch @@ -0,0 +1,27 @@ +From: Andrew Cooper <andrew.cooper3@citrix.com> +Subject: x86/spec-ctrl: Mitigate TAA after S3 resume + +The user chosen setting for MSR_TSX_CTRL needs restoring after S3. + +All APs get the correct setting via start_secondary(), but the BSP was missed +out. + +This is XSA-377 / CVE-2021-28690. + +Fixes: 8c4330818f6 ("x86/spec-ctrl: Mitigate the TSX Asynchronous Abort sidechannel") +Signed-off-by: Andrew Cooper <andrew.cooper3@citrix.com> +Reviewed-by: Jan Beulich <jbeulich@suse.com> + +diff --git a/xen/arch/x86/acpi/power.c b/xen/arch/x86/acpi/power.c +index 91a8c4d0bd..31a56f02d0 100644 +--- a/xen/arch/x86/acpi/power.c ++++ b/xen/arch/x86/acpi/power.c +@@ -288,6 +288,8 @@ static int enter_state(u32 state) + + microcode_update_one(); + ++ tsx_init(); /* Needs microcode. May change HLE/RTM feature bits. */ ++ + if ( !recheck_cpu_features(0) ) + panic("Missing previously available feature(s)\n"); + |