6 files changed, 0 insertions, 244 deletions
diff --git a/network/wifi-radar/README b/network/wifi-radar/README
deleted file mode 100644
index 20d405a221442..0000000000000
--- a/network/wifi-radar/README
+++ /dev/null
@@ -1,38 +0,0 @@
-WiFi Radar is a Python utility for managing WiFi profiles.  It enables 
-you to scan for available networks and create profiles for your preferred 
-networks. At boot time, running WiFi Radar will automatically scan for an 
-available preferred network and connect to it. You can drag and drop your 
-preferred networks to arrange the profile priority.
-
-This script installs a wifi-radar.sh script in /usr/bin that by default 
-runs /usr/sbin/wifi-radar with sudo.  You can change this to use ksudo 
-instead by running the script thusly:
-	./wifi-radar.SlackBuild KSUDO=yes
-
-To use wifi-radar with a normal user (with sudo) add to your /etc/sudoers:
-	%users   ALL = NOPASSWD: /usr/sbin/wifi-radar
-
-Then launch wifi-radar.sh, which will handle setting up a proper environment 
-and running /usr/sbin/wifi-radar.
-
-If you want to scan and connect to one of your preferred networks at
-boot, the recommended way is to add the following to /etc/rc.d/rc.local
-and make sure /etc/rc.d/rc.wifi-radar is executable.
-	if [ -x /etc/rc.d/rc.wifi-radar ]; then
-	  /etc/rc.d/rc.wifi-radar start
-	fi
-And of course, to rc.local_shutdown:
-	if [ -x /etc/rc.d/rc.wifi-radar ]; then
-	  /etc/rc.d/rc.wifi-radar stop
-	fi
-
-Please note that according to the manpage, wifi-radar is fairly power hungry 
-due to its constant scan nature.  You may not wish to have it running in the 
-background all the time sucking battery juice.
-
-Make sure /etc/wifi-radar.conf is only readable by root (or perhaps the
-group that owns it in some cases).  We install the file with mode 0600 by
-default, but this was not the case in some earlier revisions, so you should
-double-check it to be sure. As of version 1.9.9 the config file is now 
-/etc/wifi-radar.conf, if you are upgrading you need to move you old config
-file to /etc. 
-\ No newline at end of file
diff --git a/network/wifi-radar/doinst.sh b/network/wifi-radar/doinst.sh
deleted file mode 100644
index e1eb1f5802517..0000000000000
--- a/network/wifi-radar/doinst.sh
+++ /dev/null
@@ -1,32 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-if [ -x /usr/bin/update-desktop-database ]; then
-  /usr/bin/update-desktop-database usr/share/applications >/dev/null 2>&1
-fi
-
-# Keep same perms on rc.wifi-radar.new:
-if [ -e etc/rc.d/rc.wifi-radar ]; then
-  cp -a etc/rc.d/rc.wifi-radar etc/rc.d/rc.wifi-radar.new.incoming
-  cat etc/rc.d/rc.wifi-radar.new > etc/rc.d/rc.wifi-radar.new.incoming
-  mv etc/rc.d/rc.wifi-radar.new.incoming etc/rc.d/rc.wifi-radar.new
-fi
-
-config etc/wifi-radar.conf.new
-config etc/rc.d/rc.wifi-radar.new
-
-echo "Remember to edit /etc/wifi-radar.conf to suit your needs..."
-echo 
-echo "To use wifi-radar with a normal user (with sudo) add:"
-echo "%users   ALL = NOPASSWD: /usr/sbin/wifi-radar"
-echo "to /etc/sudoers, then launch wifi-radar.sh"
-echo
diff --git a/network/wifi-radar/rc.wifi-radar b/network/wifi-radar/rc.wifi-radar
deleted file mode 100644
index 488f1480865d0..0000000000000
--- a/network/wifi-radar/rc.wifi-radar
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/bin/sh
-#
-# Start/Stop the WiFi-Radar daemon
-#
-
-# get the wifi interface from rc.inet1.conf if it is set
-. /etc/rc.d/rc.inet1.conf
-INTERFACE="${IFNAME[4]}"
-PIDFILE=/var/run/wifi.pid
-
-start() {
-  # use the forced interface found in rc.inet1.conf or guess it
-  [ ! "$INTERFACE" ] && INTERFACE="$(iwconfig 2>/dev/null | grep ESSID | head -n1 | cut -d " " -f 1)"
-  sed -i "s/^[ \t]*interface[ \t]*=[ \t]*.*/interface = $INTERFACE/" /etc/wifi-radar.conf
-
-  if [ -e "${PIDFILE}" ]; then
-    echo "Found existing ${PIDFILE}! Stopping first before starting"
-    stop
-  fi
-  echo "Starting WiFi-Radar: "
-  /usr/sbin/wifi-radar --daemon 1> /dev/null 2> /dev/null &
-   ps -e | grep wifi-radar | cut -d" " -f2 > ${PIDFILE}
-}
- 
-stop() {
-  echo "Stopping WiFi-Radar: "
-  if [ -e "${PIDFILE}" ]; then
-    kill $(cat ${PIDFILE}) 1> /dev/null 2> /dev/null
-    rm -f ${PIDFILE}
-  fi
-killall wifi-radar 1> /dev/null 2> /dev/null
-}
- 
-restart() {
-  stop
-  sleep 2
-  start
-}
- 
-status() {
-  if [ -e ${PIDFILE} ]; then
-    echo "The WiFi-Radar daemon is running."
-  else
-    echo "The WiFi-Radar daemon is not running"
-  fi
-}
-
-# See how we were called.
-case "$1" in
-    start)
-        start
-        ;;
-    stop)
-        stop
-        ;;
-    restart)
-        restart
-        ;;
-    *)
-        echo $"Usage: $0 {start|stop|restart}"
-        ;;
-esac
diff --git a/network/wifi-radar/slack-desc b/network/wifi-radar/slack-desc
deleted file mode 100644
index 26e5b6ae0b84b..0000000000000
--- a/network/wifi-radar/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-          |-----handy-ruler--------------------------------------------------|
-wifi-radar: Wifi Radar (Python/PyGTK2 utility for managing WiFi profiles)
-wifi-radar: 
-wifi-radar: WiFi Radar is a Python/PyGTK2 utility for managing WiFi profiles.
-wifi-radar: It enables you to scan for available networks and create profiles
-wifi-radar: for your preferred networks. At boot time, running WiFi Radar will
-wifi-radar: automatically scan for an available preferred network and connect 
-wifi-radar: to it.
-wifi-radar: 
-wifi-radar: 
-wifi-radar: 
-wifi-radar: 
diff --git a/network/wifi-radar/wifi-radar.SlackBuild b/network/wifi-radar/wifi-radar.SlackBuild
deleted file mode 100644
index 3652a071c9b9a..0000000000000
--- a/network/wifi-radar/wifi-radar.SlackBuild
+++ /dev/null
@@ -1,85 +0,0 @@
-#!/bin/sh
-# Slackware build script for Wifi-radar
-
-# Copyright 2006-2007  David Somero (dsomero@hotmail.com)
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED
-# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
-# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=wifi-radar
-VERSION=${VERSION:-1.9.9}
-ARCH=noarch
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=$TMP/package-$PRGNAM
-OUTPUT=${OUTPUT:-/tmp}
-
-KSUDO=${KSUDO:-no}
-
-set -e 
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2
-cd $PRGNAM-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-sed -i -e 's|etc/init.d|etc/rc.d|g' Makefile
-sed -i -e 's|auto_detect||g' wifi-radar.conf
-
-if [ $KSUDO = "yes" ]; then
-  sed -i -e 's|gksudo -S|kdesu|' -e '10d' wifi-radar.desktop
-else
-  sed -i -e 's|gksudo -S wifi-radar|wifi-radar.sh|' -e '10d' wifi-radar.desktop
-fi
-
-make 
-# Install everything manually
-install -D -m 0755 wifi-radar.localized   $PKG/usr/sbin/wifi-radar
-install -D -m 0644 wifi-radar.1           $PKG/usr/man/man1/wifi-radar.1
-install -D -m 0644 wifi-radar.conf.5      $PKG/usr/man/man5/wifi-radar.conf.5
-install -D -m 0755 $CWD/rc.wifi-radar     $PKG/etc/rc.d/rc.wifi-radar.new
-install -D -m 0644 pixmaps/wifi-radar.svg $PKG/usr/share/pixmaps/wifi-radar.svg
-install -D -m 0644 pixmaps/wifi-radar.png $PKG/usr/share/pixmaps/wifi-radar.png
-install -D -m 0644 wifi-radar.desktop     $PKG/usr/share/applications/wifi-radar.desktop 
-install -D -m 0644 $CWD/slack-desc        $PKG/install/slack-desc
-install -D -m 0744 $CWD/doinst.sh         $PKG/install/doinst.sh
-install -D -m 0600 wifi-radar.conf        $PKG/etc/wifi-radar.conf.new
-install -D -m 0755 wifi-radar.sh          $PKG/usr/bin/wifi-radar.sh
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a README CHANGE.LOG INSTALL VERSION TODO COPYING CREDITS \
-  README.WPA-Mini-HOWTO.txt DEVELOPER_GUIDELINES $CWD/slack-desc \
-  $CWD/$PRGNAM.SlackBuild  $PKG/usr/doc/$PRGNAM-$VERSION
-
-( cd $PKG/usr/man
-  find . -type f -exec gzip -9 {} \;
-  for i in $(find . -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
-)
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/network/wifi-radar/wifi-radar.info b/network/wifi-radar/wifi-radar.info
deleted file mode 100644
index d60adabcbf8cf..0000000000000
--- a/network/wifi-radar/wifi-radar.info
+++ /dev/null
@@ -1,8 +0,0 @@
-PRGNAM="wifi-radar"
-VERSION="1.9.9"
-HOMEPAGE="http://wifi-radar.systemimager.org"
-DOWNLOAD="http://wifi-radar.systemimager.org/pub/wifi-radar-1.9.9.tar.bz2"
-MD5SUM="fdcf862da67e0624dcca5d71d12caddf"
-MAINTAINER="David Somero"
-EMAIL="dsomero@hotmail.com "
-APPROVED="rworkman"