diff options
Diffstat (limited to 'network')
| -rw-r--r-- | network/znc/README | 10 | ||||
| -rw-r--r-- | network/znc/README.SLACKWARE (renamed from network/znc/README.SBo) | 4 | ||||
| -rw-r--r-- | network/znc/rc.znc | 5 | ||||
| -rw-r--r-- | network/znc/slack-desc | 6 | ||||
| -rw-r--r-- | network/znc/znc.SlackBuild | 38 | ||||
| -rw-r--r-- | network/znc/znc.info | 8 |
6 files changed, 51 insertions, 20 deletions
diff --git a/network/znc/README b/network/znc/README index 7a352cbed298a..b2c3953f3dd4d 100644 --- a/network/znc/README +++ b/network/znc/README @@ -1,4 +1,4 @@ -ZNC is an advanced IRC bouncer +ZNC is an advanced IRC bouncer. ZNC will remain connected to an IPv4 or IPv6 IRC server even while you are offline. You can reattach your client at a later time and catch up @@ -15,9 +15,15 @@ simply run the build script like this: IPv6 support is also enabled by default; to disable it, run the script as: WITH_IPV6=no ./znc.SlackBuild +New since version 0.074 is the ability to use the 'c-ares' library. This +package is available on SBo and will slightly increase performance +by being able to do asynchronous DNS requests. By default this option +is off, to enable it run the script as: +WITH_CARES=yes ./znc.SlackBuild + This is intended to be run as a nonprivileged user - by default, the build script uses "znc" as the user. If you wish to change it, e.g. to use the "nobody" user, then run the script as follows: ZNC_USER=nobody ./znc.SlackBuild -See README.SBo for configuration information. +See README.SLACKWARE for configuration information. diff --git a/network/znc/README.SBo b/network/znc/README.SLACKWARE index a9972a7b5ca6e..25e686201df39 100644 --- a/network/znc/README.SBo +++ b/network/znc/README.SLACKWARE @@ -1,8 +1,8 @@ -znc README.SBo +znc README.SLACKWARE Once the package is installed, you should create your config file using znc's own interactive utility; run the following command: - su - _ZNC_USER_ -c '/usr/bin/znc --makeconf --datadir /etc/znc' + su - @ZNC_USER@ -c '/usr/bin/znc --makeconf --datadir /etc/znc' Since znc is configured to run as a nonprivileged user by default in this build script, you must choose a listening port higher than 1024. diff --git a/network/znc/rc.znc b/network/znc/rc.znc index 85d58929ceb81..6fe3405415f06 100644 --- a/network/znc/rc.znc +++ b/network/znc/rc.znc @@ -4,7 +4,7 @@ # User account under which ZNC should run; only change this if you # know what you are doing :-) -ZNC_USER="_ZNC_USER_" +ZNC_USER="@ZNC_USER@" # First, a sanity check if [[ ! -e /etc/znc/configs/znc.conf ]]; then @@ -21,7 +21,8 @@ znc_start() { echo "running, then remove the lock and try again." return 1 else - su - $ZNC_USER -c '/usr/bin/znc --datadir /etc/znc' && touch /var/lock/znc + su - $ZNC_USER -c '/usr/bin/znc --datadir /etc/znc' + touch /var/lock/znc return 0 fi } diff --git a/network/znc/slack-desc b/network/znc/slack-desc index 73aa1730126a9..28b1fad15931b 100644 --- a/network/znc/slack-desc +++ b/network/znc/slack-desc @@ -7,13 +7,13 @@ |-----handy-ruler------------------------------------------------------| znc: ZNC (an advanced IRC bouncer) -znc: +znc: znc: ZNC will remain connected to an IPv4 or IPv6 IRC server even while you znc: are offline. You can reattach your client at a later time and catch up znc: with what happened while you were gone via the history buffer. You can znc: add additional users under one running process, useful for public shells znc: that limit background processes. ZNC also supports the dynamic loading znc: of C++ and Perl modules. -znc: +znc: znc: Homepage: http://en.znc.in/wiki/ZNC -znc: +znc: diff --git a/network/znc/znc.SlackBuild b/network/znc/znc.SlackBuild index 063ce59755134..3fdacedec2723 100644 --- a/network/znc/znc.SlackBuild +++ b/network/znc/znc.SlackBuild @@ -23,7 +23,7 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PRGNAM=znc -VERSION=0.062 +VERSION=0.076 ARCH=${ARCH:-i486} BUILD=${BUILD:-1} TAG=${TAG:-_SBo} @@ -31,6 +31,7 @@ TAG=${TAG:-_SBo} ZNC_USER=${ZNC_USER:-znc} WITH_SSL=${WITH_SSL:-yes} WITH_IPV6=${WITH_IPV6:-yes} +WITH_CARES=${WITH_CARES:-no} CWD=$(pwd) TMP=${TMP:-/tmp/SBo} @@ -38,9 +39,14 @@ PKG=$TMP/package-$PRGNAM OUTPUT=${OUTPUT:-/tmp} if [ "$ARCH" = "i486" ]; then - SLKCFLAGS="-O2 -march=i486 -mtune=i686" + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "i686" ]; then - SLKCFLAGS="-O2 -march=i686 -mtune=i686" + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" fi # Bail if user and/or group isn't valid on your system @@ -76,27 +82,43 @@ else do_ipv6="--enable-ipv6" fi +if [ "$WITH_CARES" != "yes" ]; then + do_cares="--disable-c-ares" +else + do_cares="--enable-c-ares" +fi + CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ --sysconfdir=/etc \ --localstatedir=/var \ --mandir=/usr/man \ --build=$ARCH-slackware-linux \ + --enable-extra \ $do_openssl \ - $do_ipv6 + $do_ipv6 \ + $do_cares make all make install DESTDIR=$PKG +( cd $PKG + find . -exec file {} + | sed -n '/ELF.*executable\|shared object/s/:.*$//p' | \ + xargs strip --strip-unneeded 2> /dev/null || true + find . -exec file {} + | sed -n '/current ar archive/s/:.*$//p' | \ + xargs strip --strip-debug 2> /dev/null || true +) + # Change the ownership of the configuration directory mkdir -p $PKG/etc/znc chown -R $ZNC_USER $PKG/etc/znc # Install an init script mkdir -p $PKG/etc/rc.d -sed -e "s/_ZNC_USER_/$ZNC_USER/g" -e "s/_VERSION_/$VERSION/g" $CWD/rc.znc \ +sed -e "s/@ZNC_USER@/$ZNC_USER/g" -e "s/@VERSION@/$VERSION/g" $CWD/rc.znc \ > $PKG/etc/rc.d/rc.znc.new mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION @@ -104,12 +126,12 @@ cp -a \ AUTHORS LICENSE* README \ $PKG/usr/doc/$PRGNAM-$VERSION cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild -sed s/_ZNC_USER_/$ZNC_USER/g $CWD/README.SBo > \ - $PKG/usr/doc/$PRGNAM-$VERSION/README.SBo +sed s/@ZNC_USER@/$ZNC_USER/g $CWD/README.SLACKWARE > \ + $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cat $CWD/doinst.sh > $PKG/install/doinst.sh cd $PKG -/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/network/znc/znc.info b/network/znc/znc.info index 64b6ed7c11ec0..3f4969abf01fc 100644 --- a/network/znc/znc.info +++ b/network/znc/znc.info @@ -1,8 +1,10 @@ PRGNAM="znc" -VERSION="0.062" +VERSION="0.076" HOMEPAGE="http://en.znc.in/wiki/ZNC" -DOWNLOAD="http://downloads.sourceforge.net/znc/znc-0.062.tar.gz" -MD5SUM="692b8e65a7363ac3fc0e10a0cb3cd1aa" +DOWNLOAD="http://downloads.sourceforge.net/znc/znc-0.076.tar.gz" +MD5SUM="03c2804b91225e83884f06078f6db568" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" MAINTAINER="Sean Donner" EMAIL="sean.donner at gmail dot com" APPROVED="rworkman" |