diff options
Diffstat (limited to 'network')
| -rw-r--r-- | network/hping3/hping3.SlackBuild | 29 | ||||
| -rw-r--r-- | network/hping3/hping3.info | 2 | ||||
| -rw-r--r-- | network/hping3/patches/README | 1 | ||||
| -rw-r--r-- | network/hping3/patches/bytesex.diff | 25 | ||||
| -rw-r--r-- | network/hping3/patches/ip_id_field.diff | 64 | ||||
| -rw-r--r-- | network/hping3/patches/libpcap0.8.diff | 22 | ||||
| -rw-r--r-- | network/hping3/patches/personality.diff | 301 | ||||
| -rw-r--r-- | network/hping3/patches/spelling.diff | 24 | ||||
| -rw-r--r-- | network/hping3/patches/tcl.diff | 13 | ||||
| -rw-r--r-- | network/hping3/tcl85.tcpdump.patch | 36 |
10 files changed, 474 insertions, 43 deletions
diff --git a/network/hping3/hping3.SlackBuild b/network/hping3/hping3.SlackBuild index 7b04668ad0ed..1a076824df92 100644 --- a/network/hping3/hping3.SlackBuild +++ b/network/hping3/hping3.SlackBuild @@ -1,7 +1,7 @@ #!/bin/sh # Slackware build script for hping3 TCP/IP packet assembler/analyzer -# + # Copyright 2009-2010 Marco Bonetti <sid77@slackware.it> # All rights reserved. # @@ -25,22 +25,26 @@ PRGNAM=hping3 VERSION=${VERSION:-20051105} ARCH=${ARCH:-i486} -BUILD=${BUILD:-1} +BUILD=${BUILD:-2} TAG=${TAG:-_SBo} CWD=$(pwd) TMP=${TMP:-/tmp/SBo} PKG=$TMP/package-$PRGNAM OUTPUT=${OUTPUT:-/tmp} + DOCS="APD.txt API.txt AS-BACKDOOR HPING2-HOWTO.txt HPING2-IS-OPEN HPING3.txt \ MORE-FUN-WITH-IPID SPOOFED_SCAN.txt hping2rc.example" if [ "$ARCH" = "i486" ]; then SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "i686" ]; then SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" elif [ "$ARCH" = "x86_64" ]; then SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" fi set -e @@ -58,15 +62,24 @@ find . \ \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \ -exec chmod 644 {} \; -patch -p1 < $CWD/tcl85.tcpdump.patch +# Add some of Debian's patchset +patch -p1 < $CWD/patches/libpcap0.8.diff +patch -p1 < $CWD/patches/bytesex.diff +patch -p1 < $CWD/patches/spelling.diff +patch -p1 < $CWD/patches/personality.diff +patch -p1 < $CWD/patches/tcl.diff +patch -p1 < $CWD/patches/ip_id_field.diff CFLAGS="$SLKCFLAGS" \ CXXFLAGS="$SLKCFLAGS" \ ./configure \ --prefix=/usr \ + --libdir=/usr/lib${LIBDIRSUFFIX} \ --build=$ARCH-slackware-linux -make +make \ + CCOPT="$SLKCFLAGS -DUSE_TCL" \ + INSTALL_MANPATH=/usr/man # Install is done by hand, as the Makefile doesn't understand DESTDIR # (and it's just one file) @@ -81,8 +94,10 @@ install -m 0644 docs/hping2.8 $PKG/usr/man/man8/ install -m 0644 docs/hping3.8 $PKG/usr/man/man8/ ( cd $PKG - find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true - find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null + find . | xargs file | grep "executable" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null || true + find . | xargs file | grep "shared object" | grep ELF | cut -f 1 -d : | \ + xargs strip --strip-unneeded 2> /dev/null ) ( cd $PKG/usr/man @@ -98,4 +113,4 @@ mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc cd $PKG -/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/network/hping3/hping3.info b/network/hping3/hping3.info index 4d7c48e0921f..ce0f36703fe2 100644 --- a/network/hping3/hping3.info +++ b/network/hping3/hping3.info @@ -3,6 +3,8 @@ VERSION="20051105" HOMEPAGE="http://www.hping.org/" DOWNLOAD="http://www.hping.org/hping3-20051105.tar.gz" MD5SUM="ca4ea4e34bcc2162aedf25df8b2d1747" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" MAINTAINER="Marco Bonetti" EMAIL="sid77@slackware.it" APPROVED="rworkman" diff --git a/network/hping3/patches/README b/network/hping3/patches/README new file mode 100644 index 000000000000..34d5da43e400 --- /dev/null +++ b/network/hping3/patches/README @@ -0,0 +1 @@ +Thanks to Debian for the patchset :-) diff --git a/network/hping3/patches/bytesex.diff b/network/hping3/patches/bytesex.diff new file mode 100644 index 000000000000..533bc6b11317 --- /dev/null +++ b/network/hping3/patches/bytesex.diff @@ -0,0 +1,25 @@ +Endianness fixes. + +--- hping3-3.a2.ds1.orig/bytesex.h ++++ hping3-3.a2.ds1/bytesex.h +@@ -7,16 +7,11 @@ + #ifndef ARS_BYTESEX_H + #define ARS_BYTESEX_H + +-#if defined(__i386__) \ +- || defined(__alpha__) \ +- || (defined(__mips__) && (defined(MIPSEL) || defined (__MIPSEL__))) ++#include <endian.h> ++ ++#if __BYTE_ORDER == __LITTLE_ENDIAN + #define BYTE_ORDER_LITTLE_ENDIAN +-#elif defined(__mc68000__) \ +- || defined (__sparc__) \ +- || defined (__sparc) \ +- || defined (__PPC__) \ +- || defined (__BIG_ENDIAN__) \ +- || (defined(__mips__) && (defined(MIPSEB) || defined (__MIPSEB__))) ++#elif __BYTE_ORDER == __BIG_ENDIAN + #define BYTE_ORDER_BIG_ENDIAN + #else + # error can not find the byte order for this architecture, fix bytesex.h diff --git a/network/hping3/patches/ip_id_field.diff b/network/hping3/patches/ip_id_field.diff new file mode 100644 index 000000000000..bcd2029fe84f --- /dev/null +++ b/network/hping3/patches/ip_id_field.diff @@ -0,0 +1,64 @@ +--- a/docs/hping2.8 ++++ b/docs/hping2.8 +@@ -343,7 +343,7 @@ + .I -N --id + Set ip->id field. Default id is random but if fragmentation is turned on + and id isn't specified it will be +-.BR "getpid() & 0xFF" , ++.BR "getpid() & 0xFFFF" , + to implement a better solution is in TODO list. + .TP + .I -H --ipproto +@@ -714,4 +714,4 @@ + a solaris problem, as stated in the tcpdump-workers mailing list, + so the libpcap can't do nothing to handle it properly. + .SH SEE ALSO +-ping(8), traceroute(8), ifconfig(8), nmap(1) +\ No newline at end of file ++ping(8), traceroute(8), ifconfig(8), nmap(1) +--- a/docs/hping3.8 ++++ b/docs/hping3.8 +@@ -352,7 +352,7 @@ + .I -N --id + Set ip->id field. Default id is random but if fragmentation is turned on + and id isn't specified it will be +-.BR "getpid() & 0xFF" , ++.BR "getpid() & 0xFFFF" , + to implement a better solution is in TODO list. + .TP + .I -H --ipproto +--- a/hping2.h ++++ b/hping2.h +@@ -121,7 +121,7 @@ + #define DEFAULT_ICMP_IP_IHL (IPHDR_SIZE >> 2) + #define DEFAULT_ICMP_IP_TOS 0 + #define DEFAULT_ICMP_IP_TOT_LEN 0 /* computed by send_icmp_*() */ +-#define DEFAULT_ICMP_IP_ID 0 /* rand */ ++#define DEFAULT_ICMP_IP_ID -1 /* rand */ + #define DEFAULT_ICMP_CKSUM -1 /* -1 means compute the cksum */ + #define DEFAULT_ICMP_IP_PROTOCOL 6 /* TCP */ + #define DEFAULT_RAW_IP_PROTOCOL 6 /* TCP */ +--- a/parseoptions.c ++++ b/parseoptions.c +@@ -463,6 +463,10 @@ + break; + case OPT_ICMP_IPID: + icmp_ip_id = strtol(ago_optarg, NULL, 0); ++ if (icmp_ip_id < 0 || icmp_ip_id > 0xffff) { ++ fprintf(stderr, "Bad ICMP IP ID, resetting to random.\n"); ++ icmp_ip_id = DEFAULT_ICMP_IP_ID; ++ } + break; + case OPT_ICMP_IPPROTO: + icmp_ip_protocol = strtol(ago_optarg, NULL, 0); +--- a/sendicmp.c ++++ b/sendicmp.c +@@ -83,7 +83,7 @@ + icmp->type = opt_icmptype; /* echo replay or echo request */ + icmp->code = opt_icmpcode; /* should be indifferent */ + icmp->checksum = 0; +- icmp->un.echo.id = getpid() & 0xffff; ++ icmp->un.echo.id = icmp_ip_id == DEFAULT_ICMP_IP_ID ? getpid() & 0xffff : icmp_ip_id; + icmp->un.echo.sequence = _icmp_seq; + + /* data */ diff --git a/network/hping3/patches/libpcap0.8.diff b/network/hping3/patches/libpcap0.8.diff new file mode 100644 index 000000000000..97e9178cfd84 --- /dev/null +++ b/network/hping3/patches/libpcap0.8.diff @@ -0,0 +1,22 @@ +Various fixes for libpcap0.8 compilation. + +--- hping3-3.a2.ds1.orig/libpcap_stuff.c ++++ hping3-3.a2.ds1/libpcap_stuff.c +@@ -17,7 +17,6 @@ + #include <stdlib.h> + #include <sys/ioctl.h> + #include <pcap.h> +-#include <net/bpf.h> + + #include "globals.h" + +--- hping3-3.a2.ds1.orig/script.c ++++ hping3-3.a2.ds1/script.c +@@ -24,7 +24,6 @@ + + #include <sys/ioctl.h> + #include <pcap.h> +-#include <net/bpf.h> + + #include "release.h" + #include "hping2.h" diff --git a/network/hping3/patches/personality.diff b/network/hping3/patches/personality.diff new file mode 100644 index 000000000000..59c0bd712009 --- /dev/null +++ b/network/hping3/patches/personality.diff @@ -0,0 +1,301 @@ +Say hping3, not hping2. + +--- hping3-3.a2.ds1.orig/docs/hping3.8 ++++ hping3-3.a2.ds1/docs/hping3.8 +@@ -1,8 +1,8 @@ +-.TH HPING2 8 "2001 Aug 14" ++.TH HPING3 8 "2001 Aug 14" + .SH NAME +-hping2 \- send (almost) arbitrary TCP/IP packets to network hosts ++hping3 \- send (almost) arbitrary TCP/IP packets to network hosts + .SH SYNOPSIS +-.B hping2 ++.B hping3 + [ + .B \-hvnqVDzZ012WrfxykQbFSRPAUXYjJBuTG + ] [ +@@ -116,11 +116,11 @@ + .br + .ad + .SH DESCRIPTION +-hping2 is a network tool able to send custom TCP/IP packets and to +-display target replies like ping program does with ICMP replies. hping2 ++hping3 is a network tool able to send custom TCP/IP packets and to ++display target replies like ping program does with ICMP replies. hping3 + handle fragmentation, arbitrary packets body and size and can be used in + order to transfer files encapsulated under supported protocols. Using +-hping2 you are able to perform at least the following stuff: ++hping3 you are able to perform at least the following stuff: + + - Test firewall rules + - Advanced port scanning +@@ -136,7 +136,7 @@ + - A lot of others. + + .IR "It's also a good didactic tool to learn TCP/IP" . +-hping2 is developed and maintained by antirez@invece.org and is ++hping3 is developed and maintained by antirez@invece.org and is + licensed under GPL version 2. Development is open so you can send + me patches, suggestion and affronts without inhibitions. + .SH HPING SITE +@@ -158,7 +158,7 @@ + .I -c --count count + Stop after sending (and receiving) + .I count +-response packets. After last packet was send hping2 wait COUNTREACHED_TIMEOUT ++response packets. After last packet was send hping3 wait COUNTREACHED_TIMEOUT + seconds target host replies. You are able to tune COUNTREACHED_TIMEOUT editing + hping2.h + .TP +@@ -171,10 +171,10 @@ + .I wait + to X micro seconds. + The default is to wait +-one second between each packet. Using hping2 to transfer files tune this ++one second between each packet. Using hping3 to transfer files tune this + option is really important in order to increase transfer rate. Even using +-hping2 to perform idle/spoofing scanning you should tune this option, see +-.B HPING2-HOWTO ++hping3 to perform idle/spoofing scanning you should tune this option, see ++.B HPING3-HOWTO + for more information. + .TP + .I --fast +@@ -195,13 +195,13 @@ + startup time and when finished. + .TP + .I -I --interface interface name +-By default on linux and BSD systems hping2 uses default routing interface. ++By default on linux and BSD systems hping3 uses default routing interface. + In other systems or when there is no default route +-hping2 uses the first non-loopback interface. +-However you are able to force hping2 to use the interface you need using ++hping3 uses the first non-loopback interface. ++However you are able to force hping3 to use the interface you need using + this option. Note: you don't need to specify the whole name, for + example -I et will match eth0 ethernet0 myet1 et cetera. If no interfaces +-match hping2 will try to use lo. ++match hping3 will try to use lo. + .TP + .I -V --verbose + Enable verbose output. TCP replies will be shown as follows: +@@ -211,7 +211,7 @@ + .TP + .I -D --debug + Enable debug mode, it's useful when you experience some problem with +-hping2. When debug mode is enabled you will get more information about ++hping3. When debug mode is enabled you will get more information about + .B interface detection, data link layer access, interface settings, options + .B parsing, fragmentation, HCMP protocol + and other stuff. +@@ -223,30 +223,30 @@ + CTRL+Z once or twice. + .TP + .I -Z --unbind +-Unbind CTRL+Z so you will able to stop hping2. ++Unbind CTRL+Z so you will able to stop hping3. + .TP + .I --beep + Beep for every matching received packet (but not for ICMP errors). + .SH PROTOCOL SELECTION +-Default protocol is TCP, by default hping2 will send tcp headers to target ++Default protocol is TCP, by default hping3 will send tcp headers to target + host's port 0 with a winsize of 64 without any tcp flag on. Often this + is the best way to do an 'hide ping', useful when target is behind + a firewall that drop ICMP. Moreover a tcp null-flag to port 0 has a good + probability of not being logged. + .TP + .I -0 --rawip +-RAW IP mode, in this mode hping2 will send IP header with data ++RAW IP mode, in this mode hping3 will send IP header with data + appended with --signature and/or --file, see also --ipproto that + allows you to set the ip protocol field. + .TP + .I -1 --icmp +-ICMP mode, by default hping2 will send ICMP echo-request, you can set ++ICMP mode, by default hping3 will send ICMP echo-request, you can set + other ICMP type/code using + .B --icmptype --icmpcode + options. + .TP + .I -2 --udp +-UDP mode, by default hping2 will send udp to target host's port 0. ++UDP mode, by default hping3 will send udp to target host's port 0. + UDP header tunable options are the following: + .B --baseport, --destport, --keep. + .TP +@@ -288,11 +288,11 @@ + shows interesting details. + .TP + .I -9 --listen signature +-HPING2 listen mode, using this option hping2 waits for packet that contain ++HPING3 listen mode, using this option hping3 waits for packet that contain + .I signature + and dump from + .I signature +-end to packet's end. For example if hping2 --listen TEST reads a packet ++end to packet's end. For example if hping3 --listen TEST reads a packet + that contain + .B 234-09sdflkjs45-TESThello_world + it will display +@@ -304,7 +304,7 @@ + ensures that target will not gain your real address. However replies + will be sent to spoofed address, so you will can't see them. In order + to see how it's possible to perform spoofed/idle scanning see the +-.BR HPING2-HOWTO . ++.BR HPING3-HOWTO . + .TP + .I --rand-source + This option enables the +@@ -347,7 +347,7 @@ + or + .B --bind + options. If in doubt try +-.BR "" "`" "hping2 some.host.com -t 1 --traceroute" "'." ++.BR "" "`" "hping3 some.host.com -t 1 --traceroute" "'." + .TP + .I -N --id + Set ip->id field. Default id is random but if fragmentation is turned on +@@ -361,11 +361,11 @@ + .I -W --winid + id from Windows* systems before Win2k has different byte ordering, if this + option is enable +-hping2 will properly display id replies from those Windows. ++hping3 will properly display id replies from those Windows. + .TP + .I -r --rel + Display id increments instead of id. See the +-.B HPING2-HOWTO ++.B HPING3-HOWTO + for more information. Increments aren't computed as id[N]-id[N-1] but + using packet loss compensation. See relid.c for more information. + .TP +@@ -445,7 +445,7 @@ + .SH TCP/UDP RELATED OPTIONS + .TP + .I -s --baseport source port +-hping2 uses source port in order to guess replies sequence number. It ++hping3 uses source port in order to guess replies sequence number. It + starts with a base source port number, and increase this number for each + packet sent. When packet is received sequence number can be computed as + .IR "replies.dest.port - base.source.port" . +@@ -485,7 +485,7 @@ + by target host. This can be useful when you need to analyze whether + TCP sequence number is predictable. Output example: + +-.B #hping2 win98 --seqnum -p 139 -S -i u1 -I eth0 ++.B #hping3 win98 --seqnum -p 139 -S -i u1 -I eth0 + .nf + HPING uaz (eth0 192.168.4.41): S set, 40 headers + 0 data bytes + 2361294848 +2361294848 +@@ -540,8 +540,8 @@ + .SH COMMON OPTIONS + .TP + .I -d --data data size +-Set packet body size. Warning, using --data 40 hping2 will not generate +-0 byte packets but protocol_header+40 bytes. hping2 will display ++Set packet body size. Warning, using --data 40 hping3 will not generate ++0 byte packets but protocol_header+40 bytes. hping3 will display + packet size information as first line output, like this: + .B HPING www.yahoo.com (ppp0 204.71.200.67): NO FLAGS are set, 40 headers + 40 data bytes + .TP +@@ -577,9 +577,9 @@ + A to host B you may use the following: + .nf + .I [host_a] +-.B # hping2 host_b --udp -p 53 -d 100 --sign signature --safe --file /etc/passwd ++.B # hping3 host_b --udp -p 53 -d 100 --sign signature --safe --file /etc/passwd + .I [host_b] +-.B # hping2 host_a --listen signature --safe --icmp ++.B # hping3 host_a --listen signature --safe --icmp + .fi + .TP + .I -u --end +@@ -587,13 +587,13 @@ + .I --file filename + option, tell you when EOF has been reached. Moreover prevent that other end + accept more packets. Please, for more information see the +-.BR HPING2-HOWTO . ++.BR HPING3-HOWTO . + .TP + .I -T --traceroute +-Traceroute mode. Using this option hping2 will increase ttl for each ++Traceroute mode. Using this option hping3 will increase ttl for each + .B ICMP time to live 0 during transit + received. Try +-.BR "hping2 host --traceroute" . ++.BR "hping3 host --traceroute" . + This option implies --bind and --ttl 1. You can override the ttl of 1 + using the --ttl option. Since 2.0.0 stable it prints RTT information. + .TP +@@ -601,7 +601,7 @@ + Keep the TTL fixed in traceroute mode, so you can monitor just one hop + in the route. For example, to monitor how the 5th hop changes or + how its RTT changes you can try +-.BR "hping2 host --traceroute --ttl 5 --tr-keep-ttl" . ++.BR "hping3 host --traceroute --ttl 5 --tr-keep-ttl" . + .TP + .I --tr-stop + If this option is specified hping will exit once the first packet +--- hping3-3.a2.ds1.orig/main.c ++++ hping3-3.a2.ds1/main.c +@@ -193,8 +193,8 @@ + } + + if (parse_options(argc, argv) == -1) { +- printf("hping2: missing host argument\n" +- "Try `hping2 --help' for more information.\n"); ++ printf("hping3: missing host argument\n" ++ "Try `hping3 --help' for more information.\n"); + exit(1); + } + +@@ -298,7 +298,7 @@ + /* if we are in listemode enter in listenmain() else */ + /* print HPING... bla bla bla and enter in wait_packet() */ + if (opt_listenmode) { +- fprintf(stderr, "hping2 listen mode\n"); ++ fprintf(stderr, "hping3 listen mode\n"); + + /* memory protection */ + if (memlockall() == -1) { +--- hping3-3.a2.ds1.orig/parseoptions.c ++++ hping3-3.a2.ds1/parseoptions.c +@@ -215,12 +215,12 @@ + case AGO_UNKNOWN: + case AGO_REQARG: + case AGO_AMBIG: +- ago_gnu_error("hping", o); +- fprintf(stderr, "Try hping --help\n"); ++ ago_gnu_error("hping3", o); ++ fprintf(stderr, "Try hping3 --help\n"); + exit(1); + case AGO_ALONE: + if (targethost_set == 1) { +- fprintf(stderr, "hping: you must specify only " ++ fprintf(stderr, "hping3: you must specify only " + "one target host at a time\n"); + exit(1); + } else { +--- hping3-3.a2.ds1.orig/usage.c ++++ hping3-3.a2.ds1/usage.c +@@ -16,7 +16,7 @@ + void show_usage(void) + { + printf( +-"usage: hping host [options]\n" ++"usage: hping3 host [options]\n" + " -h --help show this help\n" + " -v --version show version\n" + " -c --count packet count\n" +--- hping3-3.a2.ds1.orig/version.c ++++ hping3-3.a2.ds1/version.c +@@ -18,7 +18,7 @@ + + void show_version(void) + { +- printf("hping version %s (%s)\n", RELEASE_VERSION, RELEASE_DATE); ++ printf("hping3 version %s (%s)\n", RELEASE_VERSION, RELEASE_DATE); + #ifdef USE_TCL + printf("This binary is TCL scripting capable\n"); + #else diff --git a/network/hping3/patches/spelling.diff b/network/hping3/patches/spelling.diff new file mode 100644 index 000000000000..7b6c2aa1d792 --- /dev/null +++ b/network/hping3/patches/spelling.diff @@ -0,0 +1,24 @@ +Various spelling fixes. + +--- hping3-3.a2.ds1.orig/antigetopt.c ++++ hping3-3.a2.ds1/antigetopt.c +@@ -142,7 +142,7 @@ + #define UNK_LONG_ERRSTRING "unrecognized option `--%s'\n" + #define ARG_SHORT_ERRSTRING "option requires an argument -- %c\n" + #define ARG_LONG_ERRSTRING "option `--%s' requires an argument\n" +-#define AMB_ERRSTRING "option `--%s' is ambiguos\n" ++#define AMB_ERRSTRING "option `--%s' is ambiguous\n" + #define IERR_ERRSTRING "internal error. ago_gnu_error() called with " \ + "a bad error code (%d)\n" + void ago_gnu_error(char *pname, int error) +--- hping3-3.a2.ds1.orig/statistics.c ++++ hping3-3.a2.ds1/statistics.c +@@ -30,7 +30,7 @@ + lossrate = 100; + + fprintf(stderr, "\n--- %s hping statistic ---\n", targetname); +- fprintf(stderr, "%d packets tramitted, %d packets received, " ++ fprintf(stderr, "%d packets transmitted, %d packets received, " + "%d%% packet loss\n", sent_pkt, recv_pkt, lossrate); + if (out_of_sequence_pkt) + fprintf(stderr, "%d out of sequence packets received\n", diff --git a/network/hping3/patches/tcl.diff b/network/hping3/patches/tcl.diff new file mode 100644 index 000000000000..5e2de0cfd76c --- /dev/null +++ b/network/hping3/patches/tcl.diff @@ -0,0 +1,13 @@ +Harcode libtcl version to be that of the default tclsh. + +--- a/configure ++++ b/configure +@@ -98,7 +98,7 @@ + fi + if [ -n $USE_TCL ] + then +- LIBPOSTFIX=`ls -1 /usr/local/lib/ /usr/lib | grep 'libtcl[0-9]' | grep so | sed -e 's/\.so.*//g' -e 's/libtcl//g' | sort -r | head -1` ++ LIBPOSTFIX=`echo puts \\$tcl_version | $TCLSH -` + TCL_LIB="-ltcl${LIBPOSTFIX} -lm -lpthread" + fi + diff --git a/network/hping3/tcl85.tcpdump.patch b/network/hping3/tcl85.tcpdump.patch deleted file mode 100644 index 9c4e6bed50d2..000000000000 --- a/network/hping3/tcl85.tcpdump.patch +++ /dev/null @@ -1,36 +0,0 @@ -diff -Naur hping3-20051105.orig/configure hping3-20051105/configure ---- hping3-20051105.orig/configure 2004-06-04 08:39:10.000000000 +0200 -+++ hping3-20051105/configure 2008-12-17 23:16:57.000000000 +0100 -@@ -63,7 +63,7 @@ - # - for TCLPATH_TRY in "/usr/bin/" "/usr/local/bin/" "/bin/" - do -- for TCLVER_TRY in "8.4" "8.3" "8.2" "8.1" "8.0" -+ for TCLVER_TRY in "8.5" "8.4" "8.3" "8.2" "8.1" "8.0" - do - if [ -z $TCLSH ] - then -diff -Naur hping3-20051105.orig/libpcap_stuff.c hping3-20051105/libpcap_stuff.c ---- hping3-20051105.orig/libpcap_stuff.c 2004-04-10 01:38:56.000000000 +0200 -+++ hping3-20051105/libpcap_stuff.c 2008-12-17 23:20:52.000000000 +0100 -@@ -17,7 +17,7 @@ - #include <stdlib.h> - #include <sys/ioctl.h> - #include <pcap.h> --#include <net/bpf.h> -+#include <pcap-bpf.h> - - #include "globals.h" - -diff -Naur hping3-20051105.orig/script.c hping3-20051105/script.c ---- hping3-20051105.orig/script.c 2004-05-29 08:48:13.000000000 +0200 -+++ hping3-20051105/script.c 2008-12-17 23:21:15.000000000 +0100 -@@ -24,7 +24,7 @@ - - #include <sys/ioctl.h> - #include <pcap.h> --#include <net/bpf.h> -+#include <pcap-bpf.h> - - #include "release.h" - #include "hping2.h" |