diff options
Diffstat (limited to 'network/hylafax/config.local.in')
| -rw-r--r-- | network/hylafax/config.local.in | 255 |
1 files changed, 255 insertions, 0 deletions
diff --git a/network/hylafax/config.local.in b/network/hylafax/config.local.in new file mode 100644 index 0000000000000..20412e22fe967 --- /dev/null +++ b/network/hylafax/config.local.in @@ -0,0 +1,255 @@ +# $Id: config.site,v 1.24 2009/04/23 12:45:30 aidan Exp $ +# +# HylaFAX Facsimile Software +# +# Copyright (c) 1990-1996 Sam Leffler +# Copyright (c) 1991-1996 Silicon Graphics, Inc. +# HylaFAX is a trademark of Silicon Graphics, Inc. +# +# Permission to use, copy, modify, distribute, and sell this software and +# its documentation for any purpose is hereby granted without fee, provided +# that (i) the above copyright notices and this permission notice appear in +# all copies of the software and related documentation, and (ii) the names of +# Sam Leffler and Silicon Graphics may not be used in any advertising or +# publicity relating to the software without the specific, prior written +# permission of Sam Leffler and Silicon Graphics. +# +# THE SOFTWARE IS PROVIDED "AS-IS" AND WITHOUT WARRANTY OF ANY KIND, +# EXPRESS, IMPLIED OR OTHERWISE, INCLUDING WITHOUT LIMITATION, ANY +# WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. +# +# IN NO EVENT SHALL SAM LEFFLER OR SILICON GRAPHICS BE LIABLE FOR +# ANY SPECIAL, INCIDENTAL, INDIRECT OR CONSEQUENTIAL DAMAGES OF ANY KIND, +# OR ANY DAMAGES WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, +# WHETHER OR NOT ADVISED OF THE POSSIBILITY OF DAMAGE, AND ON ANY THEORY OF +# LIABILITY, ARISING OUT OF OR IN CONNECTION WITH THE USE OR PERFORMANCE +# OF THIS SOFTWARE. +# + +# +# This file holds site-specific configuration parameters. +# +# Nothing is defined in here by default, the definitions +# commented out below serve as documentation for what you +# can set in this file or a config.local file. +# +# Note that you do not need to set anything here unless you +# want to override the auto-configuration behaviour and/or +# interactive prompting done by the configure script. +# + +# +# Package controls. +# +#DSO="auto" # configure DSO support (auto|IRIX|no) +#GETTY="auto" # type of getty support (auto|BSD|SysV) +#PS="auto" # PostScript support to use (auto|gs|dps|imp) +#SGI2FAX="auto" # configure SGI image support (auto|yes|no) +#DPS="no" # install SGI DPS-based RIP (yes|no) +GS="no" # install Ghostscript RIP (yes|no) +#IMP="no" # install SGI Impressario 2.1 support (yes|no) +#REGEX="yes" # use distributed regular expression package +#UTMP="utmpx" # type of utmp+wtmp handling (auto|utmp|utmpx) +#NLS="auto" # enable NLS support (auto|yes|no) + +# +# Directory parameters. +# +DIR_BIN="/usr/bin" # directory for client apps +DIR_LIB="/usr/lib@LIBDIRSUFFIX@" # directory for libfaxserver, libfaxutil +DIR_LIBDATA="/usr/lib@LIBDIRSUFFIX@/hylafax" # directory for client data +DIR_LIBEXEC="/usr/libexec/hylafax" # directory for libraries&hidden apps +DIR_LOCALE='/usr/share/locale' +DIR_MAN="/usr/man" # directory for manual pages +DIR_SPOOL="/var/spool/hylafax" # directory for spooling area +DIR_SBIN="/usr/sbin" # directory for system apps +#DIR_LOCKS="/usr/spool/locks" # directory for UUCP lock files +#FONTMAP="/usr/share/ghostscript/3.33" # directorys containing Fontmap files +#PATH_AFM="/usr/lib@LIBDIRSUFFIX@/DPS/AFM" # directorys for AFM files + +# +# Miscellaneous parameters. +# +#DEFVRES="196" # default vertical res for outbound fax +#FILLORDER="MS2LSB" # bit order of cpu (MSB2LSB/LSB2MSB) +FAXGID="uucp" # group ID for fax user +FAXUID="uucp" # user ID for fax user +PAGESIZE="North American Letter" # default page size +SYSGID="root" # group ID for system installs +SYSUID="root" # user ID for system installs +#LOCKS="ascii" # default UUCP lockfile scheme +# +#PATH_GETTY="/etc/getty" # pathname of suitable getty program +#PATH_VGETTY="/bin/vgetty" # pathname of voice getty program +#PATH_EGETTY="/bin/egetty" # pathname of external getty program +#PATH_SENDMAIL="/usr/lib@LIBDIRSUFFIX@/sendmail" # pathname of suitable sendmail program +PATH_GSRIP="/usr/bin/gs" # pathname of Ghostscript-based RIP +#PATH_DPSRIP="/var/spool/hylafax/bin/ps2fax.exe" # pathname of DPS-based RIP +#PATH_IMPRIP="/usr/lib@LIBDIRSUFFIX@/print/psrip" # pathname of Impressario 2.1 RIP +#MANSCHEME="sysv-source-cat-strip" # manual page installation scheme +SYSVINIT="auto" # install SysV-style init support (auto|yes|no) +DIR_SYSVINIT="/etc/rc.d" # location of SysV-style init script +DIR_SYSVINITSTART="/etc/rc.d" # location of SysV-style start script +DIR_SYSVINITSTOP="/etc/rc.d" # location of SysV-style stop script +NAME_SYSVINITSTART="rc.hylafax" # name of SysV-style start script +NAME_SYSVINITSTOP="rc.hylafax" # name of SysV-style stop script +FAXQ_SERVER=yes # init script starts faxq +HFAXD_SERVER=yes # init script starts hfaxd +HFAXD_SNPP_SERVER=no # don't start paging protocol + +# SVR4 packaging stuff +#PKG_ARCH= # ARCH variable in pkginfo file +#PKG_EMAIL=someone@somehost.somedomain # EMAIL variable in pkginfo file +#PKG_VENDOR="Your Name Here" # VENDOR variable in pkginfo file +# + +# +# Parameters used when building the software. +# +# Note that configure has several ENVOPTS built into it that are +# set according to the target. This is done to help naive folks. +# +# Beware of changing the INSTALL definition; you *must* have an +# install script that emulates the Silicon Graphics install program! +# +#AR="/bin/ar" # pathname of suitable ar program +#AROPTS="rc" # options to ar for creating archive +#CC="gcc" # name/pathname of C compiler +#CXX="gcc" # name/pathname of C++ compiler +#CXXFILE="-x c++" # options for proper C++ processing +#ENVOPTS="-Aa" # options for getting ANSI C +#GCOPTS="-g" # options to pass C compiler +#GCXXOPTS="-g" # options to pass C++ compiler +#GENDIST="/sbin/gendist" # pathname of SGI inst generator program +#INSTALL='${SHELL} ${PORT}/install.sh' # SGI install program/emulator +#LIBMALLOC="auto" # yes|no|auto configure -lmalloc use +#LIBPORT='${PORT}/libport.a' # library with emulation code +#LIBSUN="auto" # yes|no|auto configure -lsun use +#LLDOPTS="" # extra link line options +#MACHDEPLIBS="" # extra libraries for linking +#OPTIMIZER="-O" # optimizer flags +#PORTFUNCS="" # non-standard functions to emulate +#PROTOTYPES="-prototypes" # C compiler options for checking function prototypes +#RANLIB=":" # pathname of suitable ranlib program +#SHDLIBC="-lc_s" # shared C library, if not standard +#SIGHANDLERTYPES='(void(*)(int,...))' # types to check for signal handler +#STRIP="/bin/strip" # strip program used by install.sh + +# +# The source for the TIFF library is not required +# to build this software, but the library is required +# to link against. If libtiff is installed in a +# non-standard location then setup LIBTIFF accordingly. +# +LIBTIFF="-L/usr/lib@LIBDIRSUFFIX@ -ltiff" # linkage convention for libtiff +TIFFINC="-I/usr/include" # place to find tiffio.h +TIFFBIN="/usr/bin" # where TIFF tools live + +# +# The source for the ZLIB library is not required +# to build this software, but the library is required +# to link against. If ZLIB is installed in a +# non-standard location then setup LIBZ accordingly. +# +LIBZ="-L/usr/lib@LIBDIRSUFFIX@ -lz" # linkage convention for libz +ZLIBINC="-I/usr/include" # place to find zlib.h + +# +# The source for the POSIX regular expression package +# is not required to build this software, but the package +# is required to link against. If the copy of the software +# that is included in this distribution is not to be used +# then set REGEX=no and supply the following definitions. +# +#LIBREGEX="" # linkage convention for regex package +#REGEXINC="-I/usr/include" # place to find regex.h + +# +# NLS (gettext) library support is used by default if it's found +# xgettext is not required to build this software, but if you try +# and rebuild the message template catalogs, you will need it. Some +# platforms may need extra options to link for libintl as well. +# +INTLINC="-I/usr/include" +#LIBINTL="" # configure will try LIBINTL="-lintl" +#XGETTEXT="xgettext --foreign-user -ctranslator --no-wrap --sort-by-file --omit-header --strict --indent --force-po" +#MSGMERGE="msgmerge --no-wrap --sort-by-file" +#MSGFMT=msgfmt +#MSGCAT=msgcat + +# +# Parameters to control various workarounds for system bugs. +# +# These parameters are normally set in configure based on +# the target system. If they are set here, then they will +# override anything done by configure. +# +#CONFIG_OPENFIFO="O_RDONLY" # mode to open FIFOs in server proc's +#CONFIG_FIFOBUG="yes" # enable workaround for FIFO select bug +#CONFIG_TIOCMBISBYREF="yes" # pass arg by reference to ioctl +#CONFIG_WINSZHACK="no" # include extra files for TIOCWINSZ use +#CONFIG_ABORTBUG="no" # enable workaround for abort problems +#CONFIG_NOREOPEN="yes" # reopen tty device after toggling DTR +#CONFIG_NOSTDINDUP="yes" # do not redirect stdout to stdin in ondelay +#CONFIG_BADEXECVPROTO="no" # system has incorrect execv func decl +#CONFIG_BADEXECVEPROTO="no" # system has incorrect execve func decl +#CONFIG_BADGETOPTPROTO="no" # system has incorrect getopt func decl +#CONFIG_SOCKARGLENTYPE="unsigned long" # call-by-ref arg type for socket funcs +#CONFIG_BADSELECTPROTO="no" # system has way old select func decl +#CONFIG_MAXGID="5999" # maximum permissable GID +#CONFIG_OSFCNH="auto" # control inclusion of <osfcn.h> + +# +# Dynamic Shared Object (DSO) support. +# +# Beware that adding new support for DSOs may require some +# modifications to the */Makefile.dso files. +# +#DSOSUF="so" # DSO filename suffix +#DSODELAY="-delay_load" # DSO option for delayed loading +#DSOOPTS="-shared -rdata_shared" # options for building DSOs + +# +# Makefile construction parameters. +# +# These should not normally be set; configure will +# deduce the appropriate syntax to use for includes. +# +#MAKECXXOVERRIDE="=.C" # make override stuff for SunPRO C++ +#MAKEDEPINCLUDE="include" # make include for dependency files +#MAKEDSOINCLUDE="#" # make include for DSO support +#MAKEINCLUDE=".include" # make include syntax +#MAKELQUOTE="<" # make include syntax +#MAKERQUOTE=">" # make include syntax +#SETMAKE='MAKE = ${MAKE}' # define if make does not setup $MAKE +#MKDEPCOPTS="" # C compiler opts to supply w/ -M +#MKDEPCXXOPTS="" # C++ compiler opts to supply w/ -M + +# +# General system stuff used by the distribution. +# +# Beware of setting these as configure selects several programs +# based on whether or not they are capable of processing scripts +# included in the distribution (e.g AWK and SCRIPT_SH, SED). +# +#AWK="/bin/awk" # pathname of suitable awk program +#CAT="/bin/cat" # pathname of suitable cat program +#CHGRP="/etc/chgrp" # pathname of suitable chgrp program +#CHMOD="/etc/chmod" # pathname of suitable chmod program +#CHOWN="/etc/chown" # pathname of suitable chown program +#CMP="/bin/cmp" # pathname of suitable cmp program +#COL="/bin/col" # pathname of suitable col program +#CP="/bin/cp" # pathname of suitable cp program +#ECHO="/bin/echo" # pathname of suitable echo program +#GREP="/bin/grep" # pathname of suitable grep program +#LN="/bin/ln" # pathname of suitable ln program +#LN_S="-s" # option to ${LN} to create symlink +#MAN="/usr/bin/man" # pathname of suitable man program +MKDIR="/bin/mkdir -p" # pathname of suitable mkdir program +#MKFIFO="/bin/mkfifo" # pathname of suitable mkfifo program +#MV="/bin/mv" # pathname of suitable mv program +#MV_F="-f" # option to ${MV} to force operation +#RMCMD="/bin/rm" # pathname of suitable rm program +#SED="/bin/sed" # pathname of suitable sed program +#SCRIPT_SH="/bin/sh" # pathname of suitable shell +#SORT="/bin/sort" # pathname of suitable sort program |