6 files changed, 161 insertions, 0 deletions
diff --git a/network/ddclient/README b/network/ddclient/README
new file mode 100644
index 0000000000000..326eb91cb827a
--- /dev/null
+++ b/network/ddclient/README
@@ -0,0 +1,9 @@
+DDclient is a small but full featured Perl client used to update 
+dynamic DNS entries for accounts on Dynamic DNS Network Services 
+free DNS service. It has the capability to update more than only 
+dyndns and it can fetch your WAN-ipaddress on a few different ways.
+
+Supported features include: operating as a daemon, manual and 
+automatic updates, static and dynamic updates, optimized updates for
+multiple addresses, MX, wildcards, abuse avoidance, retrying failed 
+updates, and sending update status to syslog and through e-mail.
diff --git a/network/ddclient/ddclient.SlackBuild b/network/ddclient/ddclient.SlackBuild
new file mode 100644
index 0000000000000..42e2350851efe
--- /dev/null
+++ b/network/ddclient/ddclient.SlackBuild
@@ -0,0 +1,47 @@
+#!/bin/sh
+
+# Slackware build script for ddclient
+# Written by Iskar Enev <iskar.enev[@]gmail.com>
+
+PRGNAM=ddclient
+VERSION=3.7.3
+ARCH=${ARCH:-i486}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2
+cd $PRGNAM-$VERSION
+chown -R root:root .
+chmod -R u+w,go+r-w,a-s .
+
+mkdir -p $PKG/usr/bin
+cp -a ddclient $PKG/usr/bin
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+chmod 644 sample*
+cp -a COPY* Change* README* TODO sample* $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+mkdir -p $PKG/etc/rc.d
+cat $CWD/rc.ddclient.new > $PKG/etc/rc.d/rc.ddclient.new
+
+mkdir -p $PKG/etc/ddclient
+cat sample-etc_ddclient.conf > $PKG/etc/ddclient/ddclient.conf.new
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz
diff --git a/network/ddclient/ddclient.info b/network/ddclient/ddclient.info
new file mode 100644
index 0000000000000..a1451eb17f6a5
--- /dev/null
+++ b/network/ddclient/ddclient.info
@@ -0,0 +1,8 @@
+PRGNAM="ddclient"
+VERSION="3.7.3"
+HOMEPAGE="http://ddclient.sourceforge.net/"
+DOWNLOAD="http://downloads.sourceforge.net/ddclient/ddclient-3.7.3.tar.bz2"
+MD5SUM="f6a55bc68cf73ffe7e80d2fa5cd44f85"
+MAINTAINER="Iskar Enev"
+EMAIL="iskar.enev[@]gmail.com"
+APPROVED="rworkman"
diff --git a/network/ddclient/doinst.sh b/network/ddclient/doinst.sh
new file mode 100644
index 0000000000000..f8d7b3ab461cf
--- /dev/null
+++ b/network/ddclient/doinst.sh
@@ -0,0 +1,35 @@
+#!/bin/sh
+
+config() {
+  NEW="$1"
+  OLD="$(dirname $NEW)/$(basename $NEW .new)"
+  # If there's no config file by that name, mv it over:
+  if [ ! -r $OLD ]; then
+    mv $NEW $OLD
+  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then # toss the redundant copy
+    rm $NEW
+  fi
+  # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+# Keep same perms on rc.ddclient.new:
+if [ -e etc/rc.d/rc.ddclient ]; then
+  cp -a etc/rc.d/rc.ddclient etc/rc.d/rc.ddclient.new.incoming
+  cat etc/rc.d/rc.ddclient.new > etc/rc.d/rc.ddclient.new.incoming
+  mv etc/rc.d/rc.ddclient.new.incoming etc/rc.d/rc.ddclient.new
+fi
+config etc/rc.d/rc.ddclient.new
+
+# Keep same perms on ddclient.conf.new:
+#   Normally, we don't bother with this for config files, but this one
+#   should usually be readable only by root, so that's how we'll install
+#   it.  However, if the admin changes it, we don't want to undo that.
+if [ -e etc/ddclient/ddclient.conf ]; then
+  cp -a etc/ddclient/ddclient.conf etc/ddclient/ddclient.conf.new.incoming
+  cat etc/ddclient/ddclient.conf.new > etc/ddclient/ddclient.conf.new.incoming
+  mv etc/ddclient/ddclient.conf.new.incoming etc/ddclient/ddclient.conf.new
+ else
+  chmod 0600 etc/ddclient/ddclient.conf.new
+fi
+config etc/ddclient/ddclient.conf.new
+
diff --git a/network/ddclient/rc.ddclient.new b/network/ddclient/rc.ddclient.new
new file mode 100644
index 0000000000000..cb88a8dd261f1
--- /dev/null
+++ b/network/ddclient/rc.ddclient.new
@@ -0,0 +1,43 @@
+#!/bin/sh
+#
+# ddclient      This shell script takes care of starting and stopping
+#               ddclient.
+#
+# ddclient provides support for updating dynamic DNS services.
+
+[ -f /etc/ddclient/ddclient.conf ] || exit 1
+
+case "$1" in
+  start)
+	echo -n "Starting ddclient: "
+	ddclient
+	echo    
+	;;
+  stop)
+	echo -n "Shutting down ddclient: "
+	#kill $( ps -aef | grep ddclient | grep sleeping | awk '{print$2}' )
+	kill -9 $( cat /var/run/ddclient.pid )
+	echo
+	;;
+  restart)
+	$0 stop
+	$0 start
+	;;
+  status)
+	pids=$( ps -aef | grep ddclient | grep sleeping | awk '{print$2}' )
+	if test "$pids"
+	then
+		for p in $pids
+		do
+			echo "ddclient (pid $p) is running."
+		done
+	else
+		echo "ddclient is stopped."
+	fi
+	;;
+  *)
+	echo "Usage: ddclient {start|stop|restart|status}"
+	exit 1
+esac
+
+exit 0
diff --git a/network/ddclient/slack-desc b/network/ddclient/slack-desc
new file mode 100644
index 0000000000000..ae7bac692cb6e
--- /dev/null
+++ b/network/ddclient/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.  Line
+# up the first '|' above the ':' following the base package name, and the '|' on
+# the right side marks the last column you can put a character in.  You must make
+# exactly 11 lines for the formatting to be correct.  It's also customary to
+# leave one space after the ':'.
+
+        |-----handy-ruler----------------------------------------------------|
+ddclient: DDclient (Perl based DynDNS update client)
+ddclient: 
+ddclient: DDclient is a small but full featured Perl client used to update 
+ddclient: dynamic DNS entries for accounts on Dynamic DNS Network Services 
+ddclient: free DNS service. It has the capability to update more than only 
+ddclient: dyndns and it can fetch your WAN-ipaddress on a few different ways.
+ddclient: 
+ddclient: Supported features include: operating as a daemon, manual and 
+ddclient: automatic updates, static and dynamic updates, optimized updates for
+ddclient: multiple addresses, MX, wildcards, abuse avoidance, retrying failed 
+ddclient: updates, and sending update status to syslog and through e-mail.