13 files changed, 0 insertions, 360 deletions
diff --git a/multimedia/mythtv/README b/multimedia/mythtv/README
deleted file mode 100644
index 93ae755f3c06a..0000000000000
--- a/multimedia/mythtv/README
+++ /dev/null
@@ -1,10 +0,0 @@
-MythTV is a GPL licensed suite of programs that allow you to build the
-mythical home media convergence box on your own using Open Source software
-and operating systems.  MythTV is known to work on Linux and Mac OS X
-(PowerPC and Intel).
-
-See README.SLACKWARE after installation for setup information.
-
-Optional but recommended dependencies:
-libdvdcss, libavc1394, libiec61883, jack-audio-connection-kit, libvdpau,
-gsm, xmltv, mjpegtools, transcode, exif, and lirc.
diff --git a/multimedia/mythtv/README.SLACKWARE b/multimedia/mythtv/README.SLACKWARE
deleted file mode 100644
index d7d22e2b65088..0000000000000
--- a/multimedia/mythtv/README.SLACKWARE
+++ /dev/null
@@ -1,11 +0,0 @@
-README.SLACKWARE for mythtv
-
-You need to create a database before you can run mythtv:
-  # mysql -u root -p  < /usr/share/mythtv/database/mc.sql
-
-Then run mythtv-setup to configure mythtv
-  # mythtv-setup
-
-Detailed instructions for mythtv can be found here:
-  http://www.mythtv.org/wiki/index.php/User_Manual:Initial_Installation
-
diff --git a/multimedia/mythtv/doinst.sh b/multimedia/mythtv/doinst.sh
deleted file mode 100644
index 4034523b95082..0000000000000
--- a/multimedia/mythtv/doinst.sh
+++ /dev/null
@@ -1,28 +0,0 @@
-config() {
-  NEW="$1"
-  OLD="$(dirname $NEW)/$(basename $NEW .new)"
-  # If there's no config file by that name, mv it over:
-  if [ ! -r $OLD ]; then
-    mv $NEW $OLD
-  elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then 
-    # toss the redundant copy
-    rm $NEW
-  fi
-  # Otherwise, we leave the .new copy for the admin to consider...
-}
-
-# Keep same perms on rc.mythbackend.new:
-if [ -e etc/rc.d/rc.mythbackend ]; then
-  cp -a etc/rc.d/rc.mythbackend etc/rc.d/rc.mythbackend.new.incoming
-  cat etc/rc.d/rc.mythbackend.new > etc/rc.d/rc.mythbackend.new.incoming
-  mv etc/rc.d/rc.mythbackend.new.incoming etc/rc.d/rc.mythbackend.new
-fi
-
-config etc/rc.d/rc.mythbackend.new
-config etc/logrotate.d/mythbackend.new
-config etc/mythtv/config.xml.new
-config etc/mythtv/mysql.txt.new
-
-if [ -x /usr/bin/update-desktop-database ]; then
-  /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
-fi
diff --git a/multimedia/mythtv/files/mysql.txt b/multimedia/mythtv/files/mysql.txt
deleted file mode 100644
index 9248cd501e18d..0000000000000
--- a/multimedia/mythtv/files/mysql.txt
+++ /dev/null
@@ -1,39 +0,0 @@
-DBHostName=localhost
-
-# By default, Myth tries to ping the DB host to see if it exists.
-# If your DB host or network doesn't accept pings, set this to no:
-#
-#DBHostPing=no
-
-DBUserName=mythtv
-DBPassword=mythtv
-DBName=mythconverg
-DBType=QMYSQL3
-
-# Set the following if you want to use something other than this
-# machine's real hostname for identifying settings in the database.
-# This is useful if your hostname changes often, as otherwise you
-# will need to reconfigure mythtv (or futz with the DB) every time.
-# TWO HOSTS MUST NOT USE THE SAME VALUE
-#
-#LocalHostName=my-unique-identifier-goes-here
-
-# If you want your frontend to be able to wake your MySQL server
-# using WakeOnLan, have a look at the following settings:
-#
-#
-# The time the frontend waits (in seconds) between reconnect tries.
-# This should be the rough time your MySQL server needs for startup
-#
-#WOLsqlReconnectWaitTime=0
-#
-#
-# This is the number of retries to wake the MySQL server
-# until the frontend gives up
-#
-#WOLsqlConnectRetry=5
-#
-#
-# This is the command executed to wake your MySQL server.
-#
-#WOLsqlCommand=echo 'WOLsqlServerCommand not set'
diff --git a/multimedia/mythtv/files/mythfrontend.desktop b/multimedia/mythtv/files/mythfrontend.desktop
deleted file mode 100644
index a94ec5b303876..0000000000000
--- a/multimedia/mythtv/files/mythfrontend.desktop
+++ /dev/null
@@ -1,8 +0,0 @@
-[Desktop Entry]
-Name=mythTV frontend
-Comment=Record, playback and watch TV.
-Icon=mythfrontend
-Exec=mythfrontend
-Terminal=false
-Type=Application
-Categories=AudioVideo;Player;
diff --git a/multimedia/mythtv/files/mythfrontend.png b/multimedia/mythtv/files/mythfrontend.png
deleted file mode 100644
index 5d456be3af8f8..0000000000000
--- a/multimedia/mythtv/files/mythfrontend.png
+++ /dev/null
diff --git a/multimedia/mythtv/files/mythtv-setup.desktop b/multimedia/mythtv/files/mythtv-setup.desktop
deleted file mode 100644
index 8fa20f756c376..0000000000000
--- a/multimedia/mythtv/files/mythtv-setup.desktop
+++ /dev/null
@@ -1,8 +0,0 @@
-[Desktop Entry]
-Name=mythTV setup
-Comment=Setup for mythTV.
-Icon=mythtv-setup
-Exec=mythtv-setup
-Terminal=false
-Type=Application
-Categories=AudioVideo;Player;
diff --git a/multimedia/mythtv/files/mythtv-setup.png b/multimedia/mythtv/files/mythtv-setup.png
deleted file mode 100644
index 5d456be3af8f8..0000000000000
--- a/multimedia/mythtv/files/mythtv-setup.png
+++ /dev/null
diff --git a/multimedia/mythtv/files/mythtv.logrotate.d b/multimedia/mythtv/files/mythtv.logrotate.d
deleted file mode 100644
index a3024f4208d80..0000000000000
--- a/multimedia/mythtv/files/mythtv.logrotate.d
+++ /dev/null
@@ -1,10 +0,0 @@
-/var/log/mythbackend.log /var/log/mythfrontend.log {
-rotate 4
-weekly
-notifempty
-sharedscripts
-missingok
-postrotate
-[ -f "/var/run/mythbackend.pid" ] && /bin/kill -HUP `cat /var/run/mythbackend.pid`
-endscript
-}
diff --git a/multimedia/mythtv/files/rc.mythbackend.new b/multimedia/mythtv/files/rc.mythbackend.new
deleted file mode 100644
index c4d1ce1ef6de6..0000000000000
--- a/multimedia/mythtv/files/rc.mythbackend.new
+++ /dev/null
@@ -1,62 +0,0 @@
-#!/bin/sh
-# Start/stop/restart mythbackend
-#
-# Modification done by Benoit Beauchamp, based on rc.mysqld by
-#
-# Copyright 2003 Patrick J. Volkerding, Concord, CA
-# Copyright 2003 Slackware Linux, Inc., Concord, CA
-#
-# This program comes with NO WARRANTY, to the extent permitted by law.
-# You may redistribute copies of this program under the terms of the
-# GNU General Public License.
-#
-LOG=/var/log/mythbackend.log
-PID=/var/run/mythbackend.pid
-MYTHTV_HOME=/etc/mythtv
-export MYTHCONFDIR="$MYTHTV_HOME"
-export HOME="$MYTHTV_HOME"
-
-# Start mythbackend:
-myth_start() {
-  if [ -x /usr/bin/mythbackend ]; then
-    # If there is an old PID file (no mythbackend running), clean it up:
-    if [ -r $PID ]; then
-      if ! ps axc | grep mythbackend 1> /dev/null 2> /dev/null ; then
-        echo "Cleaning up old $PID."
-        rm -f $PID
-      fi
-    fi
-    echo "Starting mythbackend..."
-    /usr/bin/mythbackend -l $LOG -v important,general -p $PID -d
-  fi
-}
-
-# Stop mythbackend:
-myth_stop() {
-  # If there is no PID file, ignore this request...
-  if [ -r $PID ]; then
-    echo "Stopping mythbackend..."
-    killall mythbackend
-    rm -f $PID
-  fi
-}
-
-# Restart mythbackend:
-myth_restart() {
-  myth_stop
-  myth_start
-}
-
-case "$1" in
-'start')
-  myth_start
-  ;;
-'stop')
-  myth_stop
-  ;;
-'restart')
-  myth_restart
-  ;;
-*)
-  echo "usage $0 start|stop|restart"
-esac
diff --git a/multimedia/mythtv/mythtv.SlackBuild b/multimedia/mythtv/mythtv.SlackBuild
deleted file mode 100644
index df60728d82494..0000000000000
--- a/multimedia/mythtv/mythtv.SlackBuild
+++ /dev/null
@@ -1,155 +0,0 @@
-#!/bin/sh
-
-# Slackware build script for mythtv
-# http://www.mythtv.org/
-
-# Written by David Somero <dsomero@hotmail.com>
-# Derived from Slackware's Slackbuilds.
-#
-# Copyright 2008, 2009  Patrick J. Volkerding, Sebeka, Minnesota, USA
-# Copyright 2010-2012   David Somero (dsomero@hotmail.com) Athens, TN, USA
-# All rights reserved.
-#
-# Redistribution and use of this script, with or without modification, is
-# permitted provided that the following conditions are met:
-#
-# 1. Redistributions of this script must retain the above copyright
-#    notice, this list of conditions and the following disclaimer.
-#
-#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED
-#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
-#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
-#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
-#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
-#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
-#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
-#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
-#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
-#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
-
-PRGNAM=mythtv
-VERSION=0.26.0
-BUILD=${BUILD:-1}
-TAG=${TAG:-_SBo}
-
-if [ -z "$ARCH" ]; then
-  case "$( uname -m )" in
-    i?86) ARCH=i486 ;;
-    arm*) ARCH=arm ;;
-       *) ARCH=$( uname -m ) ;;
-  esac
-fi
-
-CWD=$(pwd)
-TMP=${TMP:-/tmp/SBo}
-PKG=${TMP}/package-${PRGNAM}
-OUTPUT=${OUTPUT:-/tmp}
-
-if [ "$ARCH" = "i486" ]; then
-  SLKCFLAGS="-O2 -march=i486 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "i686" ]; then
-  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
-  LIBDIRSUFFIX=""
-elif [ "$ARCH" = "x86_64" ]; then
-  SLKCFLAGS="-O2 -fPIC"
-  LIBDIRSUFFIX="64"
-else
-  SLKCFLAGS="-O2"
-  LIBDIRSUFFIX=""
-fi
-
-set -e
-
-rm -rf $PKG
-mkdir -p $TMP $PKG $OUTPUT
-cd $TMP
-rm -rf $PRGNAM-$VERSION
-tar xvf $CWD/$PRGNAM-$VERSION.tar.bz2
-cd $PRGNAM-$VERSION
-chown -R root:root .
-find . \
- \( -perm 777 -o -perm 775 -o -perm 711 -o -perm 555 -o -perm 511 \) \
- -exec chmod 755 {} \; -o \
- \( -perm 666 -o -perm 664 -o -perm 600 -o -perm 444 -o -perm 440 -o -perm 400 \) \
- -exec chmod 644 {} \;
-
-CFLAGS="$SLKCFLAGS" \
-CXXFLAGS="$SLKCFLAGS" \
-./configure \
-  --prefix=/usr \
-  --libdir-name=lib${LIBDIRSUFFIX} \
-  --mandir=/usr/man \
-  --compile-type=release \
-  --dvb-path=/usr/include \
-  --with-bindings="perl,python,php" \
-  --perl-config-opts="INSTALLDIRS=vendor" \
-  --disable-ccache \
-  --disable-distcc \
-  --disable-hdhomerun \
-  --enable-dvb \
-  --enable-xrandr \
-  --enable-xv \
-  --enable-x11 \
-  --enable-nonfree \
-  --enable-opengl-video \
-  --enable-libmp3lame \
-  --enable-libfaac \
-  --enable-libx264 \
-  --enable-libvpx \
-  --enable-libxvid \
-  --enable-symbol-visibility \
-  --enable-pic
-
-# Pass libdir to zeromq.
-sed -i \
-  -e"s|--without-documentation|--without-documentation --libdir=/usr/lib$LIBDIRSUFFIX|" \
-  external/Makefile
-
-make
-make install INSTALL_ROOT="$PKG"
-
-# Don't package empty and wrong man directories.
-rm -rf $PKG/usr/share/man
-
-mkdir -p $PKG/var/lib/mythtv
-mkdir -p $PKG/var/cache/mythtv
-mkdir -p $PKG/etc/{logrotate.d,mythtv}
-
-# Other config/init files
-install -D -m 0755 $CWD/files/rc.mythbackend.new $PKG/etc/rc.d/rc.mythbackend.new
-touch $PKG/etc/mythtv/config.xml.new
-cat $CWD/files/mysql.txt > $PKG/etc/mythtv/mysql.txt.new
-cat $CWD/files/mythtv.logrotate.d > $PKG/etc/logrotate.d/mythbackend.new
-
-# Create desktop entry for mythfrontend and myth-setup.
-mkdir -p $PKG/usr/share/{pixmaps,applications}
-for file in mythtv-setup mythfrontend; do
-  cat $CWD/files/$file.png > $PKG/usr/share/pixmaps/$file.png
-  cat $CWD/files/$file.desktop > $PKG/usr/share/applications/$file.desktop
-done
-
-# Copy some other needed stuff to /usr/share/mythtv
-# Nuke Windows and Mac OS X build scripts
-rm -rf contrib/Win32 contrib/OSX
-cp -a database contrib $PKG/usr/share/$PRGNAM
-
-# Remove perllocal.pod and other special files that don't need to be installed
-find $PKG -name perllocal.pod -o -name ".packlist" -o -name "*.bs" | xargs rm -f
-
-find $PKG | xargs file | grep -e "executable" -e "shared object" | grep ELF \
-  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
-
-mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
-cp -a AUTHORS COPYING FAQ keys.txt README UPGRADING docs/* \
-  $PKG/usr/doc/$PRGNAM-$VERSION
-cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
-cat $CWD/README.SLACKWARE > $PKG/usr/doc/$PRGNAM-$VERSION/README.SLACKWARE
-( cd $PKG/usr/doc ; ln -s $PRGNAM-$VERSION $PRGNAM )
-
-mkdir -p $PKG/install
-cat $CWD/doinst.sh > $PKG/install/doinst.sh
-cat $CWD/slack-desc > $PKG/install/slack-desc
-
-cd $PKG
-/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/multimedia/mythtv/mythtv.info b/multimedia/mythtv/mythtv.info
deleted file mode 100644
index 6d93596e016b9..0000000000000
--- a/multimedia/mythtv/mythtv.info
+++ /dev/null
@@ -1,10 +0,0 @@
-PRGNAM="mythtv"
-VERSION="0.26.0"
-HOMEPAGE="http://www.mythtv.org/"
-DOWNLOAD="http://downloads.sourceforge.net/mythtv.mirror/mythtv-0.26.0.tar.bz2"
-MD5SUM="f57066bf75e6f14824c494d41639f4f9"
-DOWNLOAD_x86_64=""
-MD5SUM_x86_64=""
-REQUIRES="libvpx faac lame MySQL-python lxml urlgrabber perl-http-message libwww-perl perl-Net-UPnP perl-IO-Socket-INET6 libvpx x264 xvidcore"
-MAINTAINER="David Somero"
-EMAIL="dsomero@hotmail.com"
diff --git a/multimedia/mythtv/slack-desc b/multimedia/mythtv/slack-desc
deleted file mode 100644
index 91a74c52d2eac..0000000000000
--- a/multimedia/mythtv/slack-desc
+++ /dev/null
@@ -1,19 +0,0 @@
-# HOW TO EDIT THIS FILE:
-# The "handy ruler" below makes it easier to edit a package description.  Line
-# up the first '|' above the ':' following the base package name, and the '|' on
-# the right side marks the last column you can put a character in.  You must make
-# exactly 11 lines for the formatting to be correct.  It's also customary to
-# leave one space after the ':'.
-
-      |-----handy-ruler------------------------------------------------------|
-mythtv: mythtv ( mythical home media convergence PVR/DVR )
-mythtv:
-mythtv: MythTV is a GPL licensed suite of programs that allow you
-mythtv: to build the mythical home media convergence (PVR / DVR)
-mythtv: box on your own using Open Source software and operating 
-mythtv: systems.
-mythtv:
-mythtv: Homepage: http://www.mythtv.org/
-mythtv:
-mythtv:
-mythtv: