diff options
Diffstat (limited to 'libraries')
| -rw-r--r-- | libraries/pdf4tcl/README | 19 | ||||
| -rw-r--r-- | libraries/pdf4tcl/pdf4tcl.SlackBuild | 76 | ||||
| -rw-r--r-- | libraries/pdf4tcl/pdf4tcl.info | 10 | ||||
| -rw-r--r-- | libraries/pdf4tcl/pdf4tcl.n | 1207 | ||||
| -rw-r--r-- | libraries/pdf4tcl/slack-desc | 19 |
5 files changed, 1331 insertions, 0 deletions
diff --git a/libraries/pdf4tcl/README b/libraries/pdf4tcl/README new file mode 100644 index 0000000000000..d719f6ab28e60 --- /dev/null +++ b/libraries/pdf4tcl/README @@ -0,0 +1,19 @@ +pdf4tcl is a tcl package for generating pdf files. It started as a +port of pdf4php to the tcl language. +Features: +* compressed pdf +* dumping canvas to pdf +* lines, arrows, rectangles, circles, ovals, arcs, curves +* set stroke and fill colour +* set line style (thickness and dashes) +* simple text strings, left or right aligned or centered +* text boxes with left or right aligned, centered or fully justified + text +* rotated text +* text with skewed characters +* use adobe standard fonts +* use other fonts, type1 or truetype fonts can be embedded +* jpeg and png images, plus support for raw image data +* add bookmarks and metadata +* most commonly used paper dimensions, custom ones can be provided. +* pages can be built top-down or bottom-up diff --git a/libraries/pdf4tcl/pdf4tcl.SlackBuild b/libraries/pdf4tcl/pdf4tcl.SlackBuild new file mode 100644 index 0000000000000..acd117b27d776 --- /dev/null +++ b/libraries/pdf4tcl/pdf4tcl.SlackBuild @@ -0,0 +1,76 @@ +#!/bin/bash + +# Slackware build script for pdf4tcl + +# Copyright 2023 Juan M. Lasca <juanmlasca@gmail.com> +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. +# +# Modified by DW (slackbuilds.org) + +cd $(dirname $0) ; CWD=$(pwd) + +PRGNAM=pdf4tcl +VERSION=${VERSION:-0.9.4} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} +PKGTYPE=${PKGTYPE:-tgz} +ARCH=noarch +TARBALL_VERSION=$( echo $VERSION | sed "s,\.,,g" ) + +if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then + echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE" + exit 0 +fi + +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM$TARBALL_VERSION +tar xvf $CWD/$PRGNAM$TARBALL_VERSION.tar.gz +cd $PRGNAM$TARBALL_VERSION +chown -R root:root . +find -L . \ + \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ + -o -perm 511 \) -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ + -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; + +mkdir -p $PKG/usr/lib/pdf4tcl $PKG/usr/man/mann +cp -a bitmaps pkgIndex.tcl glyph2uni.tcl \ + pdf4tcl.tcl stdmetrics.tcl \ + $PKG/usr/lib/pdf4tcl +gzip -9c $CWD/pdf4tcl.n > $PKG/usr/man/mann/pdf4tcl.n.gz + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +install -m644 licence.terms $PKG/usr/doc/$PRGNAM-$VERSION +install -m644 pdf4tcl.html $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE diff --git a/libraries/pdf4tcl/pdf4tcl.info b/libraries/pdf4tcl/pdf4tcl.info new file mode 100644 index 0000000000000..b3387eada509b --- /dev/null +++ b/libraries/pdf4tcl/pdf4tcl.info @@ -0,0 +1,10 @@ +PRGNAM="pdf4tcl" +VERSION="0.9.4" +HOMEPAGE="https://pdf4tcl.sourceforge.net/" +DOWNLOAD="https://sourceforge.net/projects/pdf4tcl/files/pdf4tcl094.tar.gz" +MD5SUM="b2c960b2f19f4bb5205a0d57ca6056f3" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +REQUIRES="" +MAINTAINER="Juan M. Lasca" +EMAIL="juanmlasca@gmail.com" diff --git a/libraries/pdf4tcl/pdf4tcl.n b/libraries/pdf4tcl/pdf4tcl.n new file mode 100644 index 0000000000000..e05801539eaf7 --- /dev/null +++ b/libraries/pdf4tcl/pdf4tcl.n @@ -0,0 +1,1207 @@ +'\" +'\" Generated from file 'pdf4tcl\&.man' by tcllib/doctools with format 'nroff' +'\" Copyright (c) 2007-2016 Peter Spjuth +'\" Copyright (c) 2009 Yaroslav Schekin +'\" +.TH "pdf4tcl" n 0\&.9\&.4 pdf4tcl "Pdf document generation" +.\" The -*- nroff -*- definitions below are for supplemental macros used +.\" in Tcl/Tk manual entries. +.\" +.\" .AP type name in/out ?indent? +.\" Start paragraph describing an argument to a library procedure. +.\" type is type of argument (int, etc.), in/out is either "in", "out", +.\" or "in/out" to describe whether procedure reads or modifies arg, +.\" and indent is equivalent to second arg of .IP (shouldn't ever be +.\" needed; use .AS below instead) +.\" +.\" .AS ?type? ?name? +.\" Give maximum sizes of arguments for setting tab stops. Type and +.\" name are examples of largest possible arguments that will be passed +.\" to .AP later. If args are omitted, default tab stops are used. +.\" +.\" .BS +.\" Start box enclosure. From here until next .BE, everything will be +.\" enclosed in one large box. +.\" +.\" .BE +.\" End of box enclosure. +.\" +.\" .CS +.\" Begin code excerpt. +.\" +.\" .CE +.\" End code excerpt. +.\" +.\" .VS ?version? ?br? +.\" Begin vertical sidebar, for use in marking newly-changed parts +.\" of man pages. The first argument is ignored and used for recording +.\" the version when the .VS was added, so that the sidebars can be +.\" found and removed when they reach a certain age. If another argument +.\" is present, then a line break is forced before starting the sidebar. +.\" +.\" .VE +.\" End of vertical sidebar. +.\" +.\" .DS +.\" Begin an indented unfilled display. +.\" +.\" .DE +.\" End of indented unfilled display. +.\" +.\" .SO ?manpage? +.\" Start of list of standard options for a Tk widget. The manpage +.\" argument defines where to look up the standard options; if +.\" omitted, defaults to "options". The options follow on successive +.\" lines, in three columns separated by tabs. +.\" +.\" .SE +.\" End of list of standard options for a Tk widget. +.\" +.\" .OP cmdName dbName dbClass +.\" Start of description of a specific option. cmdName gives the +.\" option's name as specified in the class command, dbName gives +.\" the option's name in the option database, and dbClass gives +.\" the option's class in the option database. +.\" +.\" .UL arg1 arg2 +.\" Print arg1 underlined, then print arg2 normally. +.\" +.\" .QW arg1 ?arg2? +.\" Print arg1 in quotes, then arg2 normally (for trailing punctuation). +.\" +.\" .PQ arg1 ?arg2? +.\" Print an open parenthesis, arg1 in quotes, then arg2 normally +.\" (for trailing punctuation) and then a closing parenthesis. +.\" +.\" # Set up traps and other miscellaneous stuff for Tcl/Tk man pages. +.if t .wh -1.3i ^B +.nr ^l \n(.l +.ad b +.\" # Start an argument description +.de AP +.ie !"\\$4"" .TP \\$4 +.el \{\ +. ie !"\\$2"" .TP \\n()Cu +. el .TP 15 +.\} +.ta \\n()Au \\n()Bu +.ie !"\\$3"" \{\ +\&\\$1 \\fI\\$2\\fP (\\$3) +.\".b +.\} +.el \{\ +.br +.ie !"\\$2"" \{\ +\&\\$1 \\fI\\$2\\fP +.\} +.el \{\ +\&\\fI\\$1\\fP +.\} +.\} +.. +.\" # define tabbing values for .AP +.de AS +.nr )A 10n +.if !"\\$1"" .nr )A \\w'\\$1'u+3n +.nr )B \\n()Au+15n +.\" +.if !"\\$2"" .nr )B \\w'\\$2'u+\\n()Au+3n +.nr )C \\n()Bu+\\w'(in/out)'u+2n +.. +.AS Tcl_Interp Tcl_CreateInterp in/out +.\" # BS - start boxed text +.\" # ^y = starting y location +.\" # ^b = 1 +.de BS +.br +.mk ^y +.nr ^b 1u +.if n .nf +.if n .ti 0 +.if n \l'\\n(.lu\(ul' +.if n .fi +.. +.\" # BE - end boxed text (draw box now) +.de BE +.nf +.ti 0 +.mk ^t +.ie n \l'\\n(^lu\(ul' +.el \{\ +.\" Draw four-sided box normally, but don't draw top of +.\" box if the box started on an earlier page. +.ie !\\n(^b-1 \{\ +\h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul' +.\} +.el \}\ +\h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\l'|0u-1.5n\(ul' +.\} +.\} +.fi +.br +.nr ^b 0 +.. +.\" # VS - start vertical sidebar +.\" # ^Y = starting y location +.\" # ^v = 1 (for troff; for nroff this doesn't matter) +.de VS +.if !"\\$2"" .br +.mk ^Y +.ie n 'mc \s12\(br\s0 +.el .nr ^v 1u +.. +.\" # VE - end of vertical sidebar +.de VE +.ie n 'mc +.el \{\ +.ev 2 +.nf +.ti 0 +.mk ^t +\h'|\\n(^lu+3n'\L'|\\n(^Yu-1v\(bv'\v'\\n(^tu+1v-\\n(^Yu'\h'-|\\n(^lu+3n' +.sp -1 +.fi +.ev +.\} +.nr ^v 0 +.. +.\" # Special macro to handle page bottom: finish off current +.\" # box/sidebar if in box/sidebar mode, then invoked standard +.\" # page bottom macro. +.de ^B +.ev 2 +'ti 0 +'nf +.mk ^t +.if \\n(^b \{\ +.\" Draw three-sided box if this is the box's first page, +.\" draw two sides but no top otherwise. +.ie !\\n(^b-1 \h'-1.5n'\L'|\\n(^yu-1v'\l'\\n(^lu+3n\(ul'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c +.el \h'-1.5n'\L'|\\n(^yu-1v'\h'\\n(^lu+3n'\L'\\n(^tu+1v-\\n(^yu'\h'|0u'\c +.\} +.if \\n(^v \{\ +.nr ^x \\n(^tu+1v-\\n(^Yu +\kx\h'-\\nxu'\h'|\\n(^lu+3n'\ky\L'-\\n(^xu'\v'\\n(^xu'\h'|0u'\c +.\} +.bp +'fi +.ev +.if \\n(^b \{\ +.mk ^y +.nr ^b 2 +.\} +.if \\n(^v \{\ +.mk ^Y +.\} +.. +.\" # DS - begin display +.de DS +.RS +.nf +.sp +.. +.\" # DE - end display +.de DE +.fi +.RE +.sp +.. +.\" # SO - start of list of standard options +.de SO +'ie '\\$1'' .ds So \\fBoptions\\fR +'el .ds So \\fB\\$1\\fR +.SH "STANDARD OPTIONS" +.LP +.nf +.ta 5.5c 11c +.ft B +.. +.\" # SE - end of list of standard options +.de SE +.fi +.ft R +.LP +See the \\*(So manual entry for details on the standard options. +.. +.\" # OP - start of full description for a single option +.de OP +.LP +.nf +.ta 4c +Command-Line Name: \\fB\\$1\\fR +Database Name: \\fB\\$2\\fR +Database Class: \\fB\\$3\\fR +.fi +.IP +.. +.\" # CS - begin code excerpt +.de CS +.RS +.nf +.ta .25i .5i .75i 1i +.. +.\" # CE - end code excerpt +.de CE +.fi +.RE +.. +.\" # UL - underline word +.de UL +\\$1\l'|0\(ul'\\$2 +.. +.\" # QW - apply quotation marks to word +.de QW +.ie '\\*(lq'"' ``\\$1''\\$2 +.\"" fix emacs highlighting +.el \\*(lq\\$1\\*(rq\\$2 +.. +.\" # PQ - apply parens and quotation marks to word +.de PQ +.ie '\\*(lq'"' (``\\$1''\\$2)\\$3 +.\"" fix emacs highlighting +.el (\\*(lq\\$1\\*(rq\\$2)\\$3 +.. +.\" # QR - quoted range +.de QR +.ie '\\*(lq'"' ``\\$1''\\-``\\$2''\\$3 +.\"" fix emacs highlighting +.el \\*(lq\\$1\\*(rq\\-\\*(lq\\$2\\*(rq\\$3 +.. +.\" # MT - "empty" string +.de MT +.QW "" +.. +.BS +.SH NAME +pdf4tcl \- Pdf document generation +.SH SYNOPSIS +package require \fBTcl 8\&.6\fR +.sp +package require \fBpdf4tcl ?0\&.9\&.4?\fR +.sp +\fB::pdf4tcl::new\fR \fIobjectName\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fB::pdf4tcl::getPaperSize\fR \fIpaper\fR +.sp +\fB::pdf4tcl::getPaperSizeList\fR +.sp +\fB::pdf4tcl::getPoints\fR \fIval\fR +.sp +\fB::pdf4tcl::loadBaseTrueTypeFont\fR \fIbasefontname\fR \fIttf_file_name\fR +.sp +\fB::pdf4tcl::createBaseTrueTypeFont\fR \fIbasefontname\fR \fIttf_data\fR +.sp +\fB::pdf4tcl::loadBaseType1Font\fR \fIbasefontname\fR \fIAFM_file_name\fR \fIPFB_file_name\fR +.sp +\fB::pdf4tcl::createBaseType1Font\fR \fIbasefontname\fR \fIAFM_data\fR \fIPFB_data\fR +.sp +\fB::pdf4tcl::createFont\fR \fIbasefontname\fR \fIfontname\fR \fIencoding_name\fR +.sp +\fB::pdf4tcl::createFontSpecEnc\fR \fIbasefontname\fR \fIfontname\fR \fIsubset\fR +.sp +\fB::pdf4tcl::getFonts\fR +.sp +\fB::pdf4tcl::rgb2Cmyk\fR \fIrgb\fR +.sp +\fB::pdf4tcl::cmyk2Rgb\fR \fIcmyk\fR +.sp +\fB::pdf4tcl::catPdf\fR \fIinfile\fR ?\fIinfile \&.\&.\&.\fR? \fIoutfile\fR +.sp +\fB::pdf4tcl::getForms\fR \fIinfile\fR +.sp +\fBobjectName\fR \fBmethod\fR ?\fIarg arg \&.\&.\&.\fR? +.sp +\fIobjectName\fR \fBconfigure\fR +.sp +\fIobjectName\fR \fBconfigure\fR \fIoption\fR +.sp +\fIobjectName\fR \fBconfigure\fR \fB-option\fR \fIvalue\fR\&.\&.\&. +.sp +\fIobjectName\fR \fBcget\fR \fB-option\fR +.sp +\fIobjectName\fR \fBdestroy\fR +.sp +\fIobjectName\fR \fBstartPage\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBendPage\fR +.sp +\fIobjectName\fR \fBstartXObject\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBendXObject\fR +.sp +\fIobjectName\fR \fBfinish\fR +.sp +\fIobjectName\fR \fBget\fR +.sp +\fIobjectName\fR \fBwrite\fR ?\fI-file filename\fR? +.sp +\fIobjectName\fR \fBaddForm\fR \fItype\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBgetDrawableArea\fR +.sp +\fIobjectName\fR \fBcanvas\fR \fIpath\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBmetadata\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBbookmarkAdd\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBembedFile\fR \fIfilename\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBattachFile\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR \fIfid\fR \fIdescription\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBsetFont\fR \fIsize\fR ?\fIfontname\fR? +.sp +\fIobjectName\fR \fBgetStringWidth\fR \fIstr\fR +.sp +\fIobjectName\fR \fBgetCharWidth\fR \fIchar\fR +.sp +\fIobjectName\fR \fBsetTextPosition\fR \fIx\fR \fIy\fR +.sp +\fIobjectName\fR \fBmoveTextPosition\fR \fIdx\fR \fIdy\fR +.sp +\fIobjectName\fR \fBgetTextPosition\fR +.sp +\fIobjectName\fR \fBnewLine\fR ?\fIspacing\fR? +.sp +\fIobjectName\fR \fBsetLineSpacing\fR \fIspacing\fR +.sp +\fIobjectName\fR \fBgetLineSpacing\fR +.sp +\fIobjectName\fR \fBtext\fR \fIstr\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBdrawTextBox\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR \fIstr\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBgetFontMetric\fR \fImetric\fR +.sp +\fIobjectName\fR \fBputImage\fR \fIid\fR \fIx\fR \fIy\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBputRawImage\fR \fIdata\fR \fIx\fR \fIy\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBaddImage\fR \fIfilename\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBaddRawImage\fR \fIdata\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBgetImageHeight\fR \fIid\fR +.sp +\fIobjectName\fR \fBgetImageSize\fR \fIid\fR +.sp +\fIobjectName\fR \fBgetImageWidth\fR \fIid\fR +.sp +\fIobjectName\fR \fBsetBgColor\fR \fIred\fR \fIgreen\fR \fIblue\fR +.sp +\fIobjectName\fR \fBsetBgColor\fR \fIc\fR \fIm\fR \fIy\fR \fIk\fR +.sp +\fIobjectName\fR \fBsetFillColor\fR \fIred\fR \fIgreen\fR \fIblue\fR +.sp +\fIobjectName\fR \fBsetFillColor\fR \fIc\fR \fIm\fR \fIy\fR \fIk\fR +.sp +\fIobjectName\fR \fBsetStrokeColor\fR \fIred\fR \fIgreen\fR \fIblue\fR +.sp +\fIobjectName\fR \fBsetStrokeColor\fR \fIc\fR \fIm\fR \fIy\fR \fIk\fR +.sp +\fIobjectName\fR \fBsetLineWidth\fR \fIwidth\fR +.sp +\fIobjectName\fR \fBsetLineDash\fR ?\fIon off\fR\&.\&.\&.? ?\fIoffset\fR? +.sp +\fIobjectName\fR \fBsetLineStyle\fR \fIwidth\fR \fIargs\fR +.sp +\fIobjectName\fR \fBline\fR \fIx1\fR \fIy1\fR \fIx2\fR \fIy2\fR +.sp +\fIobjectName\fR \fBcurve\fR \fIx1\fR \fIy1\fR \fIx2\fR \fIy2\fR \fIx3\fR \fIy3\fR ?\fIx4 y4\fR? +.sp +\fIobjectName\fR \fBpolygon\fR ?\fIx y\fR\&.\&.\&.? ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBcircle\fR \fIx\fR \fIy\fR \fIradius\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBoval\fR \fIx\fR \fIy\fR \fIradiusx\fR \fIradiusy\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBarc\fR \fIx\fR \fIy\fR \fIradiusx\fR \fIradiusy\fR \fIphi\fR \fIextend\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBarrow\fR \fIx1\fR \fIy1\fR \fIx2\fR \fIy2\fR \fIsize\fR ?\fIangle\fR? +.sp +\fIobjectName\fR \fBrectangle\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR ?\fIoption value\fR\&.\&.\&.? +.sp +\fIobjectName\fR \fBclip\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR +.sp +\fIobjectName\fR \fBgsave\fR +.sp +\fIobjectName\fR \fBgrestore\fR +.sp +.BE +.SH DESCRIPTION +This package provides a container class for generating \fIpdf\fR documents\&. +.SH COORDINATES +All coordinates and distances can be expressed with or without a unit\&. See +\fBUNITS\fR for valid units\&. +When the page is configured with \fB-orient\fR set to false, origin is in +the bottom left corner\&. With \fB-orient\fR true (the default), origin is in the top left +corner\&. +Origin is displaced to account for margins, i\&.e\&. if margins are 100, +the user coordinate (0,0) corresponds to (100,100) on the paper\&. +Page option \fB-orient\fR can also affect the anchor point for things like +images\&. +.SH UNITS +Any coordinates and distances can be expressed with or without an explicit +unit\&. If no unit is given, the default unit for the document is used\&. +A unit may be one of +\fBmm\fR (millimeter), +\fBm\fR (millimeter), +\fBcm\fR (centimeter), +\fBc\fR (centimeter), +\fBp\fR (points) or +\fBi\fR (inches)\&. +Commands returning coordinates or distances always return a double value +in the document's default unit\&. +.SH "PUBLIC API" +.SS "PACKAGE COMMANDS" +.TP +\fB::pdf4tcl::new\fR \fIobjectName\fR ?\fIoption value\fR\&.\&.\&.? +This command creates a new pdf4tcl object with an associated Tcl +command whose name is \fIobjectName\fR\&. This \fIobject\fR command is +explained in full detail in the sections \fBOBJECT COMMAND\fR +and \fBOBJECT METHODS\fR\&. The object command will be created +under the current namespace if the \fIobjectName\fR is not fully +qualified, and in the specified namespace otherwise\&. +If \fIobjectName\fR is %AUTO% a name will generated\&. +The return value is the newly created object's name\&. +.sp +The options and their values coming after the name of the object are +used to set the initial configuration of the object\&. +See \fBOBJECT CONFIGURATION\fR\&. +.TP +\fB::pdf4tcl::getPaperSize\fR \fIpaper\fR +This call returns the size of a named paper type, e\&.g\&. "a4"\&. +Paper names are case insensitive\&. +The argument \fIpaper\fR may also be a two element list +with values as accepted by \fB::pdf4tcl::getPoints\fR\&. +The return value is a list with width and height in points\&. +.TP +\fB::pdf4tcl::getPaperSizeList\fR +This call returns the list of known paper types\&. +.TP +\fB::pdf4tcl::getPoints\fR \fIval\fR +This call translates a measurement to points (1/72 inch)\&. +The format of \fIval\fR is '\fInum\fR ?\fIunit\fR?' where +\fInum\fR is a valid integer or double\&. See \fBUNITS\fR for valid +\fIunit\fRs\&. If no \fIunit\fR is given, the value is interpreted +as points\&. +.TP +\fB::pdf4tcl::loadBaseTrueTypeFont\fR \fIbasefontname\fR \fIttf_file_name\fR +This call loads a TTF font from file to be used by any pdf4tcl objects\&. +The \fIbasefontname\fR is used to reference this font\&. +To use this base font in documents, a font with some encoding must be +created from it using \fBcreateFont\fR or \fBcreateFontSpecEnc\fR\&. +.TP +\fB::pdf4tcl::createBaseTrueTypeFont\fR \fIbasefontname\fR \fIttf_data\fR +This call creates a base font from TTF binary data\&. +.TP +\fB::pdf4tcl::loadBaseType1Font\fR \fIbasefontname\fR \fIAFM_file_name\fR \fIPFB_file_name\fR +This call loads a Type1 font from two files (\&.afm and \&.pfb) to be used by +any pdf4tcl objects\&. The \fIbasefontname\fR is used to reference this font\&. +To use this base font in documents, a font with some encoding must be +created from it using \fBcreateFont\fR or \fBcreateFontSpecEnc\fR\&. +.TP +\fB::pdf4tcl::createBaseType1Font\fR \fIbasefontname\fR \fIAFM_data\fR \fIPFB_data\fR +This call creates a base font from AFM text and PFB binary data\&. +.TP +\fB::pdf4tcl::createFont\fR \fIbasefontname\fR \fIfontname\fR \fIencoding_name\fR +This call creates a font that can be used in documents from a base font\&. The given encoding +defines the (up to) 256 unicode characters that can be drawn when \fIfontname\fR is selected\&. +To use more characters, multiple fonts need to be created and selected based on what needs to be written\&. +.CS + + +pdf4tcl::loadBaseTrueTypeFont BaseArial "arial\&.ttf" +pdf4tcl::createFont BaseArial MyArial cp1251 +pdf4tcl::loadBaseType1Font BaseType1 "a010013l\&.afm" "a010013l\&.pfb" +pdf4tcl::createFont BaseType1 MyType1 cp1251 +pdf4tcl::new mypdf -paper a4 -compress 0 +mypdf startPage +mypdf setFont 10 MyArial +set txt "\\u042D\\u0442\\u043E \\u0442\\u0435\\u043A\\u0441\\u0442 \\u043D\\u0430 \\u0440\\u0443\\u0441\\u0441\\u043A\\u043E\\u043C\\ + \\u044F\\u0437\\u044B\\u043A\\u0435\&. This is text in Russian\&." +mypdf text $txt -bg #CACACA -x 50 -y 100 +mypdf setFont 10 MyType1 +mypdf text $txt -x 50 -y 200 +mypdf write -file fonts\&.pdf +mypdf destroy + +.CE +.TP +\fB::pdf4tcl::createFontSpecEnc\fR \fIbasefontname\fR \fIfontname\fR \fIsubset\fR +This call creates a font that can be used in documents from a base font\&. +The \fIsubset\fR must be a list of (up to 256) unicode values which are the characters that can be +drawn when \fIfontname\fR is selected\&. +.CS + + +pdf4tcl::loadBaseTrueTypeFont BaseArial "arial\&.ttf" +# Subset is a list of unicodes: +for {set f 0} {$f < 128} {incr f} {lappend subset $f} +lappend subset [expr 0xB2] [expr 0x3B2] +pdf4tcl::createFontSpecEnc BaseArial MyArial $subset +pdf4tcl::new mypdf -paper a4 +mypdf startPage +mypdf setFont 16 MyArial +set txt "sin\\u00B2\\u03B2 + cos\\u00B2\\u03B2 = 1" +mypdf text $txt -x 50 -y 100 +mypdf write -file specenc\&.pdf +mypdf destroy + +.CE +.TP +\fB::pdf4tcl::getFonts\fR +This call returns the list of known font names, i\&.e\&. those accepted in a call +to \fBsetFont\fR\&. +This includes the default fonts and fonts created by e\&.g\&. +\fB::pdf4tcl::createFont\fR\&. +.TP +\fB::pdf4tcl::rgb2Cmyk\fR \fIrgb\fR +This call translates an RGB color value to a CMYK color value\&. +It is used internally if \fB-cmyk\fR was set at object creation to +translate colors\&. +You can redefine this procedure to provide your own translation\&. +.TP +\fB::pdf4tcl::cmyk2Rgb\fR \fIcmyk\fR +This call translates a CMYK color value to an RGB color value\&. +It is used internally to translate colors\&. +You can redefine this procedure to provide your own translation\&. +.TP +\fB::pdf4tcl::catPdf\fR \fIinfile\fR ?\fIinfile \&.\&.\&.\fR? \fIoutfile\fR +This call concatenates PDF files into one\&. +Currently the implementation limits the PDFs a lot since not all details +are taken care of yet\&. Straightforward ones like those created with pdf4tcl +or ps2pdf should work mostly ok\&. +.TP +\fB::pdf4tcl::getForms\fR \fIinfile\fR +This call extracts form data from a PDF file\&. +The return value is a dictionary with id/info pairs\&. +The id is the one set with \fI-id\fR to \fBaddForm\fR, if the PDF +was generated with pdf4tcl\&. +The info is a dictionary with the following fields: +.RS +.TP +\fBtype\fR +Field type\&. +.TP +\fBvalue\fR +Form value\&. +.TP +\fBflags\fR +Value of form flags field\&. +.TP +\fBdefault\fR +Default value, if any\&. +.RE +.PP +.SS "OBJECT COMMAND" +All commands created by \fB::pdf4tcl::new\fR have the following +general form and may be used to invoke various operations on their +pdf object\&. +.TP +\fBobjectName\fR \fBmethod\fR ?\fIarg arg \&.\&.\&.\fR? +The method \fBmethod\fR and its \fIarg\fR'uments determine the exact +behavior of the command\&. See section \fBOBJECT METHODS\fR for +the detailed specifications\&. +.PP +.SS "OBJECT METHODS" +.TP +\fIobjectName\fR \fBconfigure\fR +The method returns a list of all known options and their current +values when called without any arguments\&. +.TP +\fIobjectName\fR \fBconfigure\fR \fIoption\fR +The method behaves like the method \fBcget\fR when called with a +single argument and returns the value of the option specified by said +argument\&. +.TP +\fIobjectName\fR \fBconfigure\fR \fB-option\fR \fIvalue\fR\&.\&.\&. +The method reconfigures the specified \fBoption\fRs of the object, +setting them to the associated \fIvalue\fRs, when called with an even +number of arguments, at least two\&. +.sp +The legal options are described in the section +\fBOBJECT CONFIGURATION\fR\&. +.TP +\fIobjectName\fR \fBcget\fR \fB-option\fR +This method expects a legal configuration option as argument and will +return the current value of that option for the object the method was +invoked for\&. +.sp +The legal configuration options are described in section +\fBOBJECT CONFIGURATION\fR\&. +.TP +\fIobjectName\fR \fBdestroy\fR +This method destroys the object it is invoked for\&. +If the \fB-file\fR option was given at object creation, +the output file will be finished and closed\&. +.TP +\fIobjectName\fR \fBstartPage\fR ?\fIoption value\fR\&.\&.\&.? +This method starts a new page in the document\&. The page will have the +default page settings for the document unless overridden by \fIoption\fR\&. +See \fBPAGE CONFIGURATION\fR for page settings\&. +This will end any ongoing page\&. +.TP +\fIobjectName\fR \fBendPage\fR +This method ends a page in the document\&. It is normally not needed since +it is implied by e\&.g\&. \fBstartPage\fR and \fBfinish\fR\&. However, +if the document is built page by page in e\&.g\&. an event driven environment +it can be good to call \fBendPage\fR explicitly to have all the page's +work finished before reentering the event loop\&. +.TP +\fIobjectName\fR \fBstartXObject\fR ?\fIoption value\fR\&.\&.\&.? +This method starts a new XObject in the document\&. An XObject is a reusable +drawing object and behaves just like a page where you can draw any graphics\&. +An XObject must be created between pages and this method will end any ongoing +page\&. The return value is an id that can be used with \fBputImage\fR to draw +it on the current page or with some forms\&. +All page settings (\fBPAGE CONFIGURATION\fR) are +valid when creating an XObject\&. Default options are +\fB-paper\fR = {100p 100p}, \fB-landscape\fR = 0, +\fB-orient\fR = document default, \fB-margin\fR= 0\&. +.RS +.TP +\fB-noimage\fR \fIbool\fR +If this is set the XObject is not added to the image resource set and cannot +be used with putImage, only in forms\&. The XObject also gets access to resources +which is needed to use e\&.g\&. fonts within the XObject\&. This behaviour has shown +to be PDF reader dependent, and it is currently not known if this can be +made to work better\&. +.RE +.TP +\fIobjectName\fR \fBendXObject\fR +This method ends an XObject definition\&. It works just like \fBendPage\fR\&. +.TP +\fIobjectName\fR \fBfinish\fR +This method ends the document\&. +This will do \fBendPage\fR if needed\&. +If the \fB-file\fR option was given at object creation, +the output file will be finished and closed\&. +.TP +\fIobjectName\fR \fBget\fR +This method returns the generated pdf\&. +This will do \fBendPage\fR and \fBfinish\fR if needed\&. +If the \fB-file\fR option was given at object creation, nothing is returned\&. +.TP +\fIobjectName\fR \fBwrite\fR ?\fI-file filename\fR? +This method writes the generated pdf to the given \fIfilename\fR\&. +If no \fIfilename\fR is given, it is written to stdout\&. +This will do \fBendPage\fR and \fBfinish\fR if needed\&. +If the \fB-file\fR option was given at object creation, an empty file +is created\&. +.TP +\fIobjectName\fR \fBaddForm\fR \fItype\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR ?\fIoption value\fR\&.\&.\&.? +Add an interactive form at the given position and size\&. Supported types are \fItext\fR and \fIcheckbutton\fR\&. +Option \fI-init\fR gives an initial value for the form\&. +Option \fI-id\fR gives the form an ID that must be unique within a document\&. If not given, one will be generated\&. +For a text, option \fI-multiline\fR enables multi line editing\&. +For a checkbutton, options \fI-on\fR and \fI-off\fR can be given an xobject (created with \fBstartXObject\fR) to control its appearance\&. +.PP +.SS "OBJECT METHODS, PAGE" +.TP +\fIobjectName\fR \fBgetDrawableArea\fR +This method returns the size of the available area on the page, +after removing margins\&. The return value is a list of width and height, +in the document's default unit\&. +.TP +\fIobjectName\fR \fBcanvas\fR \fIpath\fR ?\fIoption value\fR\&.\&.\&.? +Draws the contents of the canvas widget \fIpath\fR on the current page\&. +The return value is the bounding box in pdf page coordinates of the area covered\&. +Option \fI-bbox\fR gives the area of the canvas to be drawn\&. Default is +the entire contents, i\&.e\&. the result of $path bbox all\&. +Options \fI-x\fR, \fI-y\fR, \fI-width\fR and \fI-height\fR defines +an area on the page where to place the contents\&. Default area starts at origin, +stretching over the drawable area of the page\&. +Option \fI-sticky\fR defines how to place the contents within the area\&. +The area is always filled in one direction, preserving aspect ratio, unless +\fI-sticky\fR defines that the other direction should be filled too\&. Default +\fI-sticky\fR is \fInw\fR\&. +If option \fI-bg\fR is true, a background is drawn in the canvas' background +color\&. Otherwise only objects are drawn\&. Default is false\&. +Option \fI-fontmap\fR gives a dictionary mapping from Tk font names to PDF font names\&. +Option \fI-textscale\fR overrides the automatic downsizing made for tk::canvas text items that are deemed too large\&. If \fI-textscale\fR is larger than 1, all text items are reduced in size by that factor\&. +.sp +Fonts: +.sp +If no font mapping is given, fonts for text items are limited to PDF's +builtins, i\&.e\&. Helvetica, Times and Courier\&. A guess is made to chose which +one to use to get a reasonable display on the page\&. +.sp +An element in a font mapping must exactly match the -font option in the +text item\&. The corresponding mapping value is a PDF font family, e\&.g\&. one +created by \fBpdf4tcl::createFont\fR, possibly followed by a size\&. +It is recommended to use named fonts +in Tk to control the font mapping in detail\&. +.sp +Limitations: +.sp +Option -splinesteps for lines/polygons is ignored\&. +.sp +Stipple offset is limited\&. The form x,y should work\&. +.sp +Window items require Img to be present and must be visible on-screen when +the canvas is drawn\&. +.TP +\fIobjectName\fR \fBmetadata\fR ?\fIoption value\fR\&.\&.\&.? +This method sets metadata fields for this document\&. Supported field options are +\fI-author\fR, \fI-creator\fR, \fI-keywords\fR, \fI-producer\fR, \fI-subject\fR, +\fI-title\fR, \fI-creationdate\fR and \fI-format\fR\&. +.TP +\fIobjectName\fR \fBbookmarkAdd\fR ?\fIoption value\fR\&.\&.\&.? +Add a bookmark on the current page\&. +.RS +.TP +\fB-title\fR \fItext\fR +Set the text of the bookmark\&. +.TP +\fB-level\fR \fIlevel\fR +Set the level of the bookmark\&. Default is 0\&. +.TP +\fB-closed\fR \fIboolean\fR +Select if the bookmark is closed by default\&. Default is false, i\&.e\&. not closed\&. +.RE +.TP +\fIobjectName\fR \fBembedFile\fR \fIfilename\fR ?\fIoption value\fR\&.\&.\&.? +This method embeds a file into the PDF stream\&. File data is considered binary\&. Returns an id that can be used in subsequent calls to \fBattachFile\fR\&. +.RS +.TP +\fB-id\fR \fIid\fR +Explicitly select an id for the file\&. The \fIid\fR must be unique within the document\&. +.TP +\fB-contents\fR \fIdata\fR +Provides the file contents instead of reading the actual file\&. +.RE +.TP +\fIobjectName\fR \fBattachFile\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR \fIfid\fR \fIdescription\fR ?\fIoption value\fR\&.\&.\&.? +This method adds a file annotation to the current page\&. The location of the file annotation is given by the coordinates \fIx\fR, \fIy\fR, \fIwidth\fR, \fIheight\fR\&. The annotation is rendered by default as a paperclip icon, which allows the extraction of the attached file\&. An \fIfid\fR from a previous call to \fBembedFile\fR must be set as well as a \fIdescription\fR, which is shown by the PDF viewer upon activating the annotation\&. +.RS +.TP +\fB-icon\fR \fIicon\fR +Controls the appearance of the attachment\&. Valid values are Paperclip, Tag, Graph, or PushPin\&. Default value is Paperclip\&. +.RE +.CS + + +set fid [$pdfobject embedFile "data\&.txt" -contents "This should be stored in the file\&."] +$pdfobject attachFile 0 0 100 100 $fid "This is the description" + +.CE +.PP +.SS "OBJECT METHODS, TEXT" +.TP +\fIobjectName\fR \fBsetFont\fR \fIsize\fR ?\fIfontname\fR? +This method sets the font used by text drawing routines\&. If \fIfontname\fR +is not provided, the previously set \fIfontname\fR is kept\&. +.TP +\fIobjectName\fR \fBgetStringWidth\fR \fIstr\fR +This method returns the width of a string under the current font\&. +.TP +\fIobjectName\fR \fBgetCharWidth\fR \fIchar\fR +This method returns the width of a character under the current font\&. +.TP +\fIobjectName\fR \fBsetTextPosition\fR \fIx\fR \fIy\fR +Set coordinate for next text command\&. +.TP +\fIobjectName\fR \fBmoveTextPosition\fR \fIdx\fR \fIdy\fR +Increment position by \fIdx\fR, \fIdy\fR for the next text command\&. +.TP +\fIobjectName\fR \fBgetTextPosition\fR +This method returns the current text coordinate\&. +.TP +\fIobjectName\fR \fBnewLine\fR ?\fIspacing\fR? +Moves text coordinate down and resets x to where the latest +\fBsetTextPosition\fR was\&. The number of lines to move down can +be set by \fIspacing\fR\&. This may be any real number, including negative, +and defaults to the value set by \fBsetLineSpacing\fR\&. +.TP +\fIobjectName\fR \fBsetLineSpacing\fR \fIspacing\fR +Set the default line spacing used be e\&.g\&. \fBnewLine\fR\&. Initially +the spacing is 1\&. +.TP +\fIobjectName\fR \fBgetLineSpacing\fR +Get the current default line spacing\&. +.TP +\fIobjectName\fR \fBtext\fR \fIstr\fR ?\fIoption value\fR\&.\&.\&.? +Draw text at the position defined by setTextPosition using the font defined by +setFont\&. +.RS +.TP +\fB-align\fR \fIleft|right|center\fR (default left) +.TP +\fB-angle\fR \fIdegrees\fR (default 0) - Orient string at the specified angle\&. +.TP +\fB-xangle\fR \fIdegrees\fR (default 0) +.TP +\fB-yangle\fR \fIdegrees\fR (default 0) - Apply x or y shear to the text\&. +.TP +\fB-x\fR \fIx\fR (default 0) +.TP +\fB-y\fR \fIy\fR (default 0) - Allow the text to be positioned without setTextPosition\&. +.TP +\fB-bg\fR \fIbool\fR (default 0) +.TP +\fB-background\fR \fIbool\fR (default 0) +.TP +\fB-fill\fR \fIbool\fR (default 0) +Any of \fB-bg\fR, \fB-background\fR or \fB-fill\fR cause the text to be drawn +on a background whose color is set by setBgColor\&. +.RE +.TP +\fIobjectName\fR \fBdrawTextBox\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR \fIstr\fR ?\fIoption value\fR\&.\&.\&.? +Draw the text string \fIstr\fR wrapping at blanks and tabs so that it fits within the box defined +by \fIx\fR, \fIy\fR, \fIwidth\fR and \fIheight\fR\&. An embedded newline in \fIstr\fR causes +a new line in the output\&. If \fIstr\fR is too long to fit in the specified box, it is truncated and the unused remainder is returned\&. +.RS +.TP +\fB-align\fR \fIleft|right|center|justify\fR +Specifies the justification\&. If not given, the text is left justified\&. +.TP +\fB-linesvar\fR \fIvar\fR +Gives the name of a variable which will be set to the number of lines written\&. +.TP +\fB-dryrun\fR \fIbool\fR +If true, no changes will be made to the PDF document\&. The return +value and \fB-linesvar\fR gives information of what would happen +with the given text\&. +.RE +.TP +\fIobjectName\fR \fBgetFontMetric\fR \fImetric\fR +Get information about current font\&. The available \fImetric\fRs are +\fBascend\fR, \fBdescend\fR, \fBfixed\fR, \fBbboxb\fR, +\fBbboxt\fR and \fBheight\fR\&. +.RS +.TP +\fBascend\fR +Top of typical glyph, displacement from anchor point\&. Typically a positive number since it is above the anchor point\&. +.TP +\fBdescend\fR +Bottom of typical glyph, displacement from anchor point\&. Typically a negative number since it is below the anchor point\&. +.TP +\fBfixed\fR +Boolean which is true if this is a fixed width font\&. +.TP +\fBbboxb\fR +Bottom of Bounding Box, displacement from anchor point\&. Typically a negative number since it is below the anchor point\&. +.TP +\fBbboxt\fR +Top of Bounding Box, displacement from anchor point\&. Typically a positive number since it is above the anchor point\&. +.TP +\fBheight\fR +Height of font's Bounding Box\&. +.RE +.PP +.SS "OBJECT METHODS, IMAGES" +A limited set of image formats are directly understood by pdf4tcl, +currently some JPEG, some PNG, and some TIFF formats\&. +To use unsupported formats, use Tk and the Img +package to load and dump images to raw format which can be fed to +\fBputRawImage\fR and \fBaddRawImage\fR\&. +.TP +\fIobjectName\fR \fBputImage\fR \fIid\fR \fIx\fR \fIy\fR ?\fIoption value\fR\&.\&.\&.? +Put an image on the current page\&. The image must have been added previously by +\fBaddImage\fR or \fBaddRawImage\fR\&. The \fIid\fR is the one returned +from the add command\&. +.RS +.TP +\fB-angle\fR \fIdegrees\fR +Rotate image \fIdegrees\fR counterclockwise around the anchor point\&. +Default is 0\&. +.TP +\fB-anchor\fR \fIanchor\fR +Set the anchor point (nw, n, ne etc\&.) of the image\&. +Coordinates \fIx\fR and \fIy\fR places the anchor point, and any rotation is around the anchor point\&. +Default is nw if \fB-orient\fR is true, otherwise se\&. +.TP +\fB-height\fR \fIheight\fR +Set the height of the image\&. Default height is one point per pixel\&. If \fIwidth\fR is set but not \fIheight\fR, +the height is selected to preserve the aspect ratio of the image\&. +.TP +\fB-width\fR \fIwidth\fR +Set the width of the image\&. Default width is one point per pixel\&. +If \fIheight\fR is set but not \fIwidth\fR, the width is selected to +preserve the aspect ratio of the image\&. +.RE +.TP +\fIobjectName\fR \fBputRawImage\fR \fIdata\fR \fIx\fR \fIy\fR ?\fIoption value\fR\&.\&.\&.? +Put an image on the current page\&. Works like \fBputImage\fR except that the raw image data is given directly\&. +.RS +.TP +\fB-compress\fR \fIboolean\fR +Raw data will be zlib compressed if this option is set to true\&. +Default value is the document's \fB-compress\fR setting\&. +.RE +.CS + + + image create photo img1 -file image\&.gif + set imgdata [img1 data] + mypdf putRawImage $imgdata 60 20 -height 40 + +.CE +.TP +\fIobjectName\fR \fBaddImage\fR \fIfilename\fR ?\fIoption value\fR\&.\&.\&.? +Add an image to the document\&. Returns an id that can be used in subsequent +calls to \fBputImage\fR\&. Supported formats are PNG, JPEG and TIFF\&. +.RS +.TP +\fB-id\fR \fIid\fR +Explicitly select an id for the image\&. The \fIid\fR must be unique within the document\&. +.TP +\fB-type\fR \fIname\fR +Set the image type\&. This can usually be deduced from the file name, this +option helps when that is not possible\&. This can be either "png", "jpeg", +or "tiff"\&. +.RE +.TP +\fIobjectName\fR \fBaddRawImage\fR \fIdata\fR ?\fIoption value\fR\&.\&.\&.? +Add an image to the document\&. Works like \fBaddImage\fR except that the raw image data is given directly\&. +.RS +.TP +\fB-compress\fR \fIboolean\fR +Raw data will be zlib compressed if this option is set to true\&. +Default value is the document's \fB-compress\fR setting\&. +.RE +.CS + + + image create photo img1 -file image\&.gif + set imgdata [img1 data] + set id [mypdf addRawImage $imgdata] + mypdf putImage $id 20 60 -width 100 + +.CE +.TP +\fIobjectName\fR \fBgetImageHeight\fR \fIid\fR +This method returns the height of the image identified by \fIid\fR\&. +.TP +\fIobjectName\fR \fBgetImageSize\fR \fIid\fR +This method returns the size of the image identified by \fIid\fR\&. The +return value is a list of width and height\&. +.TP +\fIobjectName\fR \fBgetImageWidth\fR \fIid\fR +This method returns the width of the image identified by \fIid\fR\&. +.PP +.SS "OBJECT METHODS, COLORS" +Colors can be expressed in various formats\&. First, as a three element list +of values in the range 0\&.0 to 1\&.0\&. Second, in the format #XXXXXX where +the Xes are two hexadecimal digits per color value\&. Third, if Tk is available, +any color accepted by winfo rgb is accepted\&. +.TP +\fIobjectName\fR \fBsetBgColor\fR \fIred\fR \fIgreen\fR \fIblue\fR +Sets the background color for text operations where -bg is true\&. +.TP +\fIobjectName\fR \fBsetBgColor\fR \fIc\fR \fIm\fR \fIy\fR \fIk\fR +Alternative calling form, to set color in CMYK color space\&. +.TP +\fIobjectName\fR \fBsetFillColor\fR \fIred\fR \fIgreen\fR \fIblue\fR +Sets the fill color for graphics operations, and the foreground color for +text operations\&. +.TP +\fIobjectName\fR \fBsetFillColor\fR \fIc\fR \fIm\fR \fIy\fR \fIk\fR +Alternative calling form, to set color in CMYK color space\&. +.TP +\fIobjectName\fR \fBsetStrokeColor\fR \fIred\fR \fIgreen\fR \fIblue\fR +Sets the stroke color for graphics operations\&. +.TP +\fIobjectName\fR \fBsetStrokeColor\fR \fIc\fR \fIm\fR \fIy\fR \fIk\fR +Alternative calling form, to set color in CMYK color space\&. +.PP +.SS "OBJECT METHODS, GRAPHICS" +.TP +\fIobjectName\fR \fBsetLineWidth\fR \fIwidth\fR +Sets the width for subsequent line drawing\&. +Line width must be a non-negative number\&. +.TP +\fIobjectName\fR \fBsetLineDash\fR ?\fIon off\fR\&.\&.\&.? ?\fIoffset\fR? +Sets the dash pattern for subsequent line drawing\&. +Offset and any elements in the dash pattern must be non-negative numbers\&. +\fIon off\fR is a series of pairs of numbers which define a +dash pattern\&. The 1st, 3rd \&.\&.\&. numbers give units to paint, +the 2nd, 4th \&.\&.\&. numbers specify unpainted gaps\&. When all numbers have +been used, the pattern is re-started from the beginning\&. +An optional last argument sets the dash offset, which defaults to 0\&. +Calling \fBsetLineDash\fR with no arguments resets the dash pattern +to a solid line\&. +.TP +\fIobjectName\fR \fBsetLineStyle\fR \fIwidth\fR \fIargs\fR +Sets the width and dash pattern for subsequent line drawing\&. +Line width and any elements in the dash pattern must be non-negative numbers\&. +\fIargs\fR is a series of numbers (not a tcl list) which define a +dash pattern\&. The 1st, 3rd \&.\&.\&. numbers give units to paint, +the 2nd, 4th \&.\&.\&. numbers specify unpainted gaps\&. When all numbers have +been used, the pattern is re-started from the beginning\&. +This method do not support offsetting the pattern, see \fBsetLineDash\fR +for a more complete method\&. +.TP +\fIobjectName\fR \fBline\fR \fIx1\fR \fIy1\fR \fIx2\fR \fIy2\fR +Draws a line from \fIx1,\fR \fIy1\fR to \fIx2,\fR \fIy2\fR +.TP +\fIobjectName\fR \fBcurve\fR \fIx1\fR \fIy1\fR \fIx2\fR \fIy2\fR \fIx3\fR \fIy3\fR ?\fIx4 y4\fR? +If \fIx4,\fR \fIy4\fR are present, draws a cubic bezier from \fIx1,\fR +\fIy1\fR to \fIx4,\fR \fIy4\fR with control points \fIx2,\fR \fIy2\fR and +\fIx3,\fR \fIy3\fR\&. Otherwise draws a quadratic bezier from \fIx1,\fR +\fIy1\fR to \fIx3,\fR \fIy3\fR, with control point \fIx2,\fR +\fIy2\fR +.TP +\fIobjectName\fR \fBpolygon\fR ?\fIx y\fR\&.\&.\&.? ?\fIoption value\fR\&.\&.\&.? +Draw a polygon\&. There must be at least 3 points\&. +The polygon is closed back to the first coordinate unless \fI-closed\fR is false in which case a poly-line is drawn\&. +.RS +.TP +\fB-filled\fR \fIbool\fR (default 0) +Fill the polygon\&. +.TP +\fB-stroke\fR \fIbool\fR (default 1) +Draw an outline of the polygon\&. +.TP +\fB-closed\fR \fIbool\fR (default 1) +Close polygon\&. +.RE +.TP +\fIobjectName\fR \fBcircle\fR \fIx\fR \fIy\fR \fIradius\fR ?\fIoption value\fR\&.\&.\&.? +Draw a circle at the given center coordinates\&. +.RS +.TP +\fB-filled\fR \fIbool\fR (default 0) +Fill the circle\&. +.TP +\fB-stroke\fR \fIbool\fR (default 1) +Draw an outline of the circle\&. +.RE +.TP +\fIobjectName\fR \fBoval\fR \fIx\fR \fIy\fR \fIradiusx\fR \fIradiusy\fR ?\fIoption value\fR\&.\&.\&.? +Draw an oval at the given center coordinates\&. +.RS +.TP +\fB-filled\fR \fIbool\fR (default 0) +Fill the oval\&. +.TP +\fB-stroke\fR \fIbool\fR (default 1) +Draw an outline of the oval\&. +.RE +.TP +\fIobjectName\fR \fBarc\fR \fIx\fR \fIy\fR \fIradiusx\fR \fIradiusy\fR \fIphi\fR \fIextend\fR ?\fIoption value\fR\&.\&.\&.? +Draw an arc, following the given oval\&. The arc starts at angle \fIphi\fR, given in degrees starting in the "east" direction, counting counter clockwise\&. The arc extends \fIextend\fR degrees\&. +.RS +.TP +\fB-filled\fR \fIbool\fR (default 0) +Fill the arc\&. +.TP +\fB-stroke\fR \fIbool\fR (default 1) +Draw an outline of the arc\&. +.TP +\fB-style\fR \fIarc|pieslice|chord\fR (default \fIarc\fR) +Defines the style of the arc\&. An \fIarc\fR draws the perimeter of the arc and is never filled\&. A \fIpieslice\fR closes the arc with lines to the center of the oval\&. A \fIchord\fR closes the arc directly\&. +.RE +.TP +\fIobjectName\fR \fBarrow\fR \fIx1\fR \fIy1\fR \fIx2\fR \fIy2\fR \fIsize\fR ?\fIangle\fR? +Draw an arrow\&. Default \fIangle\fR is 20 degrees\&. +.TP +\fIobjectName\fR \fBrectangle\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR ?\fIoption value\fR\&.\&.\&.? +Draw a rectangle\&. +.RS +.TP +\fB-filled\fR \fIbool\fR (default 0) +Fill the rectangle\&. +.TP +\fB-stroke\fR \fIbool\fR (default 1) +Draw an outline of the rectangle\&. +.RE +.TP +\fIobjectName\fR \fBclip\fR \fIx\fR \fIy\fR \fIwidth\fR \fIheight\fR +Create a clip region\&. To cancel a clip region you must restore a graphic context that was saved before\&. +.TP +\fIobjectName\fR \fBgsave\fR +Save graphic/text context\&. (I\&.e\&. insert a raw PDF "q" command)\&. +This saves the settings of at least these calls: \fBclip\fR, \fBsetBgColor\fR, \fBsetFillColor\fR, \fBsetStrokeColor\fR, \fBsetLineStyle\fR, \fBsetLineWidth\fR, \fBsetLineDash\fR, \fBsetFont\fR, and \fBsetLineSpacing\fR\&. +Each call to \fBgsave\fR should be followed by a later call to \fBgrestore\fR in the same page\&. +.TP +\fIobjectName\fR \fBgrestore\fR +Restore graphic/text context\&. (I\&.e\&. insert a raw PDF "Q" command)\&. +.PP +.SS "OBJECT CONFIGURATION" +All pdf4tcl objects understand the options from \fBPAGE CONFIGURATION\fR, +which defines default page settings when used with a pdf4tcl object\&. +The objects also understand the following configuration options: +.TP +\fB-cmyk\fR \fIboolean\fR +If true, pdf4tcl will try to generate the document in CMYK color space\&. +See \fB::pdf4tcl::rgb2Cmyk\fR for a way to control color translation\&. +Default value is false\&. +This option can only be set at object creation\&. +.TP +\fB-compress\fR \fIboolean\fR +Pages will be zlib compressed if this option is set to true\&. +Default value is true\&. +This option can only be set at object creation\&. +.TP +\fB-file\fR \fIfilename\fR +Continuously write pdf to \fIfilename\fR instead of storing it +in memory\&. +This option can only be set at object creation\&. +.TP +\fB-unit\fR \fIdefaultunit\fR +Defines default unit for coordinates and distances\&. Any value given without +a unit is interpreted using this unit\&. +See \fBUNITS\fR for valid units\&. +Default value is "p" as in points\&. +This option can only be set at object creation\&. +.PP +.SS "PAGE CONFIGURATION" +.TP +\fB-paper\fR \fIname\fR +The argument of this option defines the paper size\&. +The paper size may be a string like "a4", where valid values +are available through \fB::pdf4tcl::getPaperSizeList\fR\&. +Paper size may also be a two element list specifying width and height\&. +.sp +The default value of this option is "a4"\&. +.TP +\fB-landscape\fR \fIboolean\fR +If true, paper width and height are switched\&. +.sp +The default value of this option is false\&. +.TP +\fB-orient\fR \fIboolean\fR +This sets the orientation of the y axis of the coordinate system\&. +With \fB-orient\fR false, origin is in the bottom left corner\&. +With \fB-orient\fR true, origin is in the top left corner\&. +.sp +The default value of this option is true\&. +.TP +\fB-margin\fR \fIvalues\fR +The margin is a one, two or four element list of margins\&. +For one element, it specifies all margins\&. +Two elements specify left/right and top/bottom\&. +Four elements specify left, right, top and bottom\&. +.sp +The default value of this option is zero\&. +.TP +\fB-rotate\fR \fIangle\fR +This value defines a rotation angle for the display of the page\&. +Allowed values are multiples of 90\&. +.sp +The default value of this option is zero\&. +.PP +.SH EXAMPLES +.CS + + + pdf4tcl::new mypdf -paper a3 + mypdf startPage + mypdf setFont 12 Courier + mypdf text "Hejsan" -x 50 -y 50 + mypdf write -file mypdf\&.pdf + mypdf destroy + +.CE +.SH "SEE ALSO" +doctools +.SH KEYWORDS +document, pdf +.SH COPYRIGHT +.nf +Copyright (c) 2007-2016 Peter Spjuth +Copyright (c) 2009 Yaroslav Schekin + +.fi diff --git a/libraries/pdf4tcl/slack-desc b/libraries/pdf4tcl/slack-desc new file mode 100644 index 0000000000000..7d33c91c44eef --- /dev/null +++ b/libraries/pdf4tcl/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. +# Line up the first '|' above the ':' following the base package name, and +# the '|' on the right side marks the last column you can put a character in. +# You must make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +pdf4tcl: pdf4tcl (tcl package for generating pdf files) +pdf4tcl: +pdf4tcl: pdf4tcl is a tcl package for generating pdf files. +pdf4tcl: It's features include compressed pdf, canvas to pdf, basic shapes, +pdf4tcl: set stroke and fill colour, set line style, simple text strings, +pdf4tcl: left or right aligned or centered text boxes with left or right +pdf4tcl: aligned, centered or fully justified text, rotated text, text +pdf4tcl: with skewed characters, use adobe standard fonts, use other +pdf4tcl: fonts, jpeg and png images, support for raw image data, bookmarks +pdf4tcl: and metadata, most commonly used paper dimensions. +pdf4tcl: for more info, visit: https://pdf4tcl.sourceforge.net/ |