5 files changed, 166 insertions, 0 deletions
diff --git a/libraries/libindi-libraries/README b/libraries/libindi-libraries/README
new file mode 100644
index 0000000000000..cfa839e3f804b
--- /dev/null
+++ b/libraries/libindi-libraries/README
@@ -0,0 +1,20 @@
+INDI Third Party Device Libraries
+
+INDI is a distributed control protocol designed to operate astronomical
+instrumentation. INDI is small, flexible, easy to parse, and scalable.
+It supports common DCS functions such as remote control, data
+acquisition, monitoring, and a lot more.
+
+This script builds several third party libraries required by the
+drivers.
+
+Some optional hardware dependecies are:
+fxload       download firmware into FX, FX2, and FX2LP EZ-USB devices
+             and devices and I2C serial EEPROMs (SBo)
+
+Notes:
+1. Some of the drivers will need additional configuration of their
+   dependencies, e.g. gpsd for GPS devices.
+2. Not all device drivers are implemented yet since their dependencies
+   are not yet available on Slackbuilds.org.  This is a work in
+   progress.
diff --git a/libraries/libindi-libraries/doinst.sh b/libraries/libindi-libraries/doinst.sh
new file mode 100644
index 0000000000000..47e1cb12cb445
--- /dev/null
+++ b/libraries/libindi-libraries/doinst.sh
@@ -0,0 +1,3 @@
+if [ -x /sbin/udevadm ]; then
+  /sbin/udevadm control --reload-rules >/dev/null 2>&1 && /sbin/udevadm trigger >/dev/null 2>&1
+fi
diff --git a/libraries/libindi-libraries/libindi-libraries.SlackBuild b/libraries/libindi-libraries/libindi-libraries.SlackBuild
new file mode 100644
index 0000000000000..09bc7ed867800
--- /dev/null
+++ b/libraries/libindi-libraries/libindi-libraries.SlackBuild
@@ -0,0 +1,114 @@
+#!/bin/bash
+
+# Slackware build script for libindi
+
+# Copyright 2018 2022 Edward W. Koenig, Vancouver, WA, USA
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+#    notice, this list of conditions and the following disclaimer.
+#
+#  THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+#  WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+#  MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED.  IN NO
+#  EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+#  SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+#  PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+#  OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+#  WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+#  OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+#  ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+cd $(dirname $0) ; CWD=$(pwd)
+
+PRGNAM=libindi-libraries
+SRCNAM="indi-3rdparty"
+VERSION=${VERSION:-1.9.7}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+PKGTYPE=${PKGTYPE:-tgz}
+
+if [ -z "$ARCH" ]; then
+  case "$( uname -m )" in
+    i?86) ARCH=i586 ;;
+    arm*) ARCH=arm ;;
+       *) ARCH=$( uname -m ) ;;
+  esac
+fi
+
+case "$ARCH" in
+  x86_64) ;;
+  arm*) ;;
+  *) echo "Unsupported ARCH '$ARCH'"; exit 1 ;;
+esac
+
+# If the variable PRINT_PACKAGE_NAME is set, then this script will report what
+# the name of the created package would be, and then exit. This information
+# could be useful to other scripts.
+if [ ! -z "${PRINT_PACKAGE_NAME}" ]; then
+  echo "$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE"
+  exit 0
+fi
+
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i586" ]; then
+  SLKCFLAGS="-O2 -march=i586 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+  SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+  LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+  SLKCFLAGS="-O2 -fPIC"
+  LIBDIRSUFFIX="64"
+else
+  SLKCFLAGS="-O2"
+  LIBDIRSUFFIX=""
+fi
+
+set -e
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $SRCNAM-$VERSION
+tar xvf $CWD/$SRCNAM-$VERSION.tar.gz
+cd $SRCNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+  -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+  -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+# Note: Some libraris may require addition sotware not yet availabe on SBo
+
+export CFLAGS="$SLKCFLAGS"
+export CXXFLAGS="$SLKCFLAGS"
+mkdir -p build
+cd build
+  cmake \
+    -DCMAKE_INSTALL_PREFIX=/usr \
+    -DBUILD_LIBS=1 \
+    -DCMAKE_BUILD_TYPE=Release ..
+  make
+  make install DESTDIR=$PKG
+cd ..
+
+find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \
+  | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a README $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.$PKGTYPE
diff --git a/libraries/libindi-libraries/libindi-libraries.info b/libraries/libindi-libraries/libindi-libraries.info
new file mode 100644
index 0000000000000..642ba315b8684
--- /dev/null
+++ b/libraries/libindi-libraries/libindi-libraries.info
@@ -0,0 +1,10 @@
+PRGNAM="libindi-libraries"
+VERSION="1.9.7"
+HOMEPAGE="https://www.indilib.org/"
+DOWNLOAD="UNSUPPORTED"
+MD5SUM=""
+DOWNLOAD_x86_64="https://github.com/indilib/indi-3rdparty/archive/v1.9.7/indi-3rdparty-1.9.7.tar.gz"
+MD5SUM_x86_64="d756d3e9184349145e4e2669c19c71c6"
+REQUIRES="libindi libdc1394 libftdi1 gpsd"
+MAINTAINER="Edward W. Koenig"
+EMAIL="kingbeowulf@linuxgalaxy.org"
diff --git a/libraries/libindi-libraries/slack-desc b/libraries/libindi-libraries/slack-desc
new file mode 100644
index 0000000000000..95ad3ea4c3b7e
--- /dev/null
+++ b/libraries/libindi-libraries/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct.  It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+                 |-----handy-ruler------------------------------------------------------|
+libindi-libraries: libindi-libraries (Instrument Neutral Distributed Interface)
+libindi-libraries:
+libindi-libraries: INDI is a distributed control protocol designed to operate
+libindi-libraries: astronomical instrumentation. This script builds the third party
+libindi-libraries: libraries for instrument control and data acquisition.
+libindi-libraries:
+libindi-libraries:
+libindi-libraries: https://www.indilib.org/
+libindi-libraries:
+libindi-libraries:
+libindi-libraries: