aboutsummaryrefslogtreecommitdiff
path: root/gis/gpsd
diff options
context:
space:
mode:
Diffstat (limited to 'gis/gpsd')
-rw-r--r--gis/gpsd/README34
-rw-r--r--gis/gpsd/README.build81
-rw-r--r--gis/gpsd/doinst.sh30
-rw-r--r--gis/gpsd/gpsd.SlackBuild145
-rw-r--r--gis/gpsd/gpsd.info10
-rw-r--r--gis/gpsd/rc.gpsd.conf.new14
-rw-r--r--gis/gpsd/rc.gpsd.new61
-rw-r--r--gis/gpsd/slack-desc19
-rw-r--r--gis/gpsd/xgps.desktop9
-rw-r--r--gis/gpsd/xgpsspeed.desktop9
10 files changed, 412 insertions, 0 deletions
diff --git a/gis/gpsd/README b/gis/gpsd/README
new file mode 100644
index 000000000000..379d93e8bd5c
--- /dev/null
+++ b/gis/gpsd/README
@@ -0,0 +1,34 @@
+gpsd is a service daemon that monitors one or more GPSes attached to
+a host computer through serial or USB ports, making all data on the
+location, course, and velocity available to be queried on TCP port
+2947 of the host computer. With gpsd, multiple GPS client applications
+(such as navigational and wardriving software) can share access to GPSes
+without contention or loss of data. Applications that presently use
+gpsd include Viking, foxtrotgps and Kismet.
+
+See README.build for some build options that might be useful.
+
+To enable automatic startup of gpsd at boot time, or when a GPS device
+is connected via USB, you need to do the following four steps:
+
+1. Copy the file /lib/udev/rules.d/97-gpsd.rules to /etc/udev/rules.d/
+
+2. Edit the file /etc/udev/rules.d/97-gpsd.rules and uncomment the line
+(or lines) beginning '#ATTRS' that corresponds to your GPS hardware.
+To avoid confusion with other USB serial devices that you might have,
+do not uncomment lines that do not correspond to your GPS hardware.
+But if you do not know which line to uncomment, and you do not have any
+other serial devices, you can uncomment them all :-)
+
+3. Make the file /etc/rc.d/rc.gpsd executable.
+ chmod +x /etc/rc.d/rc.gpsd
+
+4. Add the following lines to /etc/rc.d/rc.local
+ if [ -x /etc/rc.d/rc.gpsd ]; then
+ /etc/rc.d/rc.gpsd start
+ fi
+
+Configuration options may be set in the file /etc/rc.d/rc.gpsd.conf.
+The defaults will usually be adequate. However, if your GPS is on a
+real (non-USB) serial port -- for example, /dev/ttyS0 -- you should add
+/dev/ttyS0 to GPS_DEVICES in /etc/rc.d/rc.gpsd.conf.
diff --git a/gis/gpsd/README.build b/gis/gpsd/README.build
new file mode 100644
index 000000000000..035973319f9d
--- /dev/null
+++ b/gis/gpsd/README.build
@@ -0,0 +1,81 @@
+Enabling and disabling devices and features
+-------------------------------------------
+
+Support for various devices and features may be enabled and/or disabled by
+setting the variables ENABLE and DISABLE before running gpsd.SlackBuild,
+for example
+
+ENABLE="fixed_port_speed=9600,timing" DISABLE="bluez,ipv6" ./gpsd.SlackBuild
+
+Multiple options may be separated by commas (as shown above) or by spaces.
+
+
+The following features may be enabled (by default they are disabled).
+
+ dbus_export enable DBUS export support
+ force_global force daemon to listen on all addressses
+ profiling enable profiling support
+ squelch enable gpsd_report/gpsd_hexdump suppression (saves cpu)
+ timing enable latency timing support
+ gpsd_group=groupname
+ set privilege revocation group (default=dialout)
+ gpsd_user=username
+ set privilege revocation user (default=nobody)
+ fixed_port_speed=nnnn
+ set fixed serial port speed
+ fixed_stop_bits=n
+ set fixed serial port stop bits
+ limited_max_clients=n
+ set maximum allowed clients
+ limited_max_devices=n
+ set maximum allowed devices
+
+
+The following devices and features may be disabled (by default they are
+enabled).
+
+ aivdm disable AIVDM support
+ ashtech disable Ashtech support
+ bluez disable BlueZ support for Bluetooth devices
+ control_socket disable control socket for hotplug notifications
+ controlsend disable gpsctl/gpsmon can change device settings
+ earthmate disable DeLorme EarthMate Zodiac support
+ evermore disable EverMore binary support
+ fury disable Jackson Labs Fury and Firefly support
+ fv18 disable San Jose Navigation FV-18 support
+ garmin disable Garmin kernel driver support
+ garmintxt disable Garmin Simple Text support
+ geostar disable Geostar Protocol support
+ gpsclock disable GPSClock support
+ ipv6 disable build IPv6 support
+ itrax disable iTrax hardware support
+ leapfetch disable build-time fetch up-to-date leap second data
+ mtk3301 disable MTK-3301 support
+ navcom disable Navcom support
+ netfeed disable support for handling TCP/IP data sources
+ nmea disable NMEA support
+ nmea2000 disable NMEA2000/CAN support
+ ntpshm disable NTP time hinting support
+ ntrip disable NTRIP support
+ oceanserver disable OceanServer support
+ oldstyle disable oldstyle (pre-JSON) protocol support
+ oncore disable Motorola OnCore chipset support
+ passthrough disable support for passing through JSON
+ reconfigure disable gpsd can change device settings
+ rtcm104v2 disable rtcm104v2 support
+ rtcm104v3 disable rtcm104v3 support
+ shm_export disable export via shared memory
+ sirf disable SiRF chipset support
+ socket_export disable data export over sockets
+ superstar2 disable Novatel SuperStarII chipset support
+ tnt disable True North Technologies support
+ tripmate disable DeLorme TripMate support
+ tsip disable Trimble TSIP support
+ ublox disable u-blox Protocol support
+ ubx disable UBX Protocol support
+ usb disable libusb support for USB devices
+
+
+Note that PPS is not supported. Additional userspace tools are required, see
+ http://www.linuxpps.org/wiki/index.php/LinuxPPS_installation
+ https://github.com/ago/pps-tools
diff --git a/gis/gpsd/doinst.sh b/gis/gpsd/doinst.sh
new file mode 100644
index 000000000000..81e9fca8c2eb
--- /dev/null
+++ b/gis/gpsd/doinst.sh
@@ -0,0 +1,30 @@
+config() {
+ NEW="$1"
+ OLD="$(dirname $NEW)/$(basename $NEW .new)"
+ # If there's no config file by that name, mv it over:
+ if [ ! -r $OLD ]; then
+ mv $NEW $OLD
+ elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then
+ # toss the redundant copy
+ rm $NEW
+ fi
+ # Otherwise, we leave the .new copy for the admin to consider...
+}
+
+preserve_perms() {
+ NEW="$1"
+ OLD="$(dirname $NEW)/$(basename $NEW .new)"
+ if [ -e $OLD ]; then
+ cp -a $OLD ${NEW}.incoming
+ cat $NEW > ${NEW}.incoming
+ mv ${NEW}.incoming $NEW
+ fi
+ config $NEW
+}
+
+preserve_perms etc/rc.d/rc.gpsd.new
+config etc/rc.d/rc.gpsd.conf.new
+
+if [ -x /usr/bin/update-desktop-database ]; then
+ /usr/bin/update-desktop-database -q usr/share/applications >/dev/null 2>&1
+fi
diff --git a/gis/gpsd/gpsd.SlackBuild b/gis/gpsd/gpsd.SlackBuild
new file mode 100644
index 000000000000..d8bf25e8072b
--- /dev/null
+++ b/gis/gpsd/gpsd.SlackBuild
@@ -0,0 +1,145 @@
+#!/bin/sh
+
+# Slackware build script for gpsd
+
+# Copyright 2011 David Spencer, Baildon, West Yorkshire, U.K.
+# All rights reserved.
+#
+# Redistribution and use of this script, with or without modification, is
+# permitted provided that the following conditions are met:
+#
+# 1. Redistributions of this script must retain the above copyright
+# notice, this list of conditions and the following disclaimer.
+#
+# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED
+# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO
+# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO,
+# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS;
+# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY,
+# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR
+# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+PRGNAM=gpsd
+VERSION=${VERSION:-3.10}
+BUILD=${BUILD:-1}
+TAG=${TAG:-_SBo}
+
+if [ -z "$ARCH" ]; then
+ case "$( uname -m )" in
+ i?86) ARCH=i486 ;;
+ arm*) ARCH=arm ;;
+ *) ARCH=$( uname -m ) ;;
+ esac
+fi
+
+CWD=$(pwd)
+TMP=${TMP:-/tmp/SBo}
+PKG=$TMP/package-$PRGNAM
+OUTPUT=${OUTPUT:-/tmp}
+
+if [ "$ARCH" = "i486" ]; then
+ SLKCFLAGS="-O2 -march=i486 -mtune=i686"
+ LIBDIRSUFFIX=""
+elif [ "$ARCH" = "i686" ]; then
+ SLKCFLAGS="-O2 -march=i686 -mtune=i686"
+ LIBDIRSUFFIX=""
+elif [ "$ARCH" = "x86_64" ]; then
+ SLKCFLAGS="-O2 -fPIC"
+ LIBDIRSUFFIX="64"
+else
+ SLKCFLAGS="-O2"
+ LIBDIRSUFFIX=""
+fi
+
+set -e
+
+ENABLELIST=""
+set -- $(echo $ENABLE | sed 's/,/ /g')
+while [ "$1" != "" ]
+do
+ case "$1" in
+ *=* )
+ ENABLELIST+=" $1"
+ ;;
+ * )
+ ENABLELIST+=" $1=yes"
+ ;;
+ esac
+ shift
+done
+DISABLELIST=""
+set -- $(echo $DISABLE | sed 's/,/ /g')
+while [ "$1" != "" ]
+do
+ DISABLELIST+=" $1=no"
+ shift
+done
+
+rm -rf $PKG
+mkdir -p $TMP $PKG $OUTPUT
+cd $TMP
+rm -rf $PRGNAM-$VERSION
+tar xvf $CWD/$PRGNAM-$VERSION.tar.gz
+cd $PRGNAM-$VERSION
+chown -R root:root .
+find -L . \
+ \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \
+ -o -perm 511 \) -exec chmod 755 {} \; -o \
+ \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \
+ -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \;
+
+CFLAGS=$SLKCFLAGS \
+scons \
+ prefix=/usr \
+ libdir=/usr/lib${LIBDIRSUFFIX} \
+ pkgconfigdir=/usr/lib${LIBDIRSUFFIX}/pkgconfig \
+ mandir=/usr/man \
+ chrpath=no \
+ $ENABLELIST \
+ $DISABLELIST
+
+DESTDIR=$PKG \
+scons \
+ --implicit-deps-unchanged \
+ install
+
+find $PKG/usr/man -type f -exec gzip -9 {} \;
+for i in $(find $PKG/usr/man -type l) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done
+
+install -D -m 0644 $CWD/xgps.desktop \
+ $PKG/usr/share/applications/xgps.desktop
+install -D -m 0644 $CWD/xgpsspeed.desktop \
+ $PKG/usr/share/applications/xgpsspeed.desktop
+install -D -m 0644 packaging/X11/gpsd-logo.png \
+ $PKG/usr/share/pixmaps/gpsd-logo.png
+
+# Get hotplug config from /etc/rc.d/rc.gpsd.conf not /etc/default/gpsd
+sed -i 's;/etc/default/gpsd;/etc/rc.d/rc.gpsd.conf;' gpsd.hotplug
+install -D -m 0755 gpsd.hotplug \
+ $PKG/lib/udev/gpsd.hotplug
+mkdir -p $PKG/lib/udev/rules.d
+
+# Comment out all udev rules: the user is expected to enable only the
+# rules required (see README)
+cat gpsd.rules | \
+ sed 's/^ATTRS/#&/' \
+ >$PKG/lib/udev/rules.d/97-gpsd.rules
+
+install -D -m 0644 $CWD/rc.gpsd.new \
+ $PKG/etc/rc.d/rc.gpsd.new
+install -D -m 0644 $CWD/rc.gpsd.conf.new \
+ $PKG/etc/rc.d/rc.gpsd.conf.new
+
+mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION
+cp -a AUTHORS COPYING INSTALL README TODO build.txt $PKG/usr/doc/$PRGNAM-$VERSION
+cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild
+
+mkdir -p $PKG/install
+cat $CWD/slack-desc > $PKG/install/slack-desc
+cat $CWD/doinst.sh > $PKG/install/doinst.sh
+
+cd $PKG
+/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz}
diff --git a/gis/gpsd/gpsd.info b/gis/gpsd/gpsd.info
new file mode 100644
index 000000000000..e88c73934067
--- /dev/null
+++ b/gis/gpsd/gpsd.info
@@ -0,0 +1,10 @@
+PRGNAM="gpsd"
+VERSION="3.10"
+HOMEPAGE="http://catb.org/gpsd/"
+DOWNLOAD="http://download-mirror.savannah.gnu.org/releases/gpsd/gpsd-3.10.tar.gz"
+MD5SUM="fc5b03aae38b9b5b6880b31924d0ace3"
+DOWNLOAD_x86_64=""
+MD5SUM_x86_64=""
+REQUIRES="scons"
+MAINTAINER="David Spencer"
+EMAIL="baildon.research@googlemail.com"
diff --git a/gis/gpsd/rc.gpsd.conf.new b/gis/gpsd/rc.gpsd.conf.new
new file mode 100644
index 000000000000..3566b69c0877
--- /dev/null
+++ b/gis/gpsd/rc.gpsd.conf.new
@@ -0,0 +1,14 @@
+# /etc/rc.d/rc.gpsd.conf
+# Configuration settings for gpsd
+
+# If your GPS is on a real (non-USB) serial port, add /dev/ttyS<n> here,
+# for example
+# GPSD_DEVICES="/dev/gps* /dev/ttyS1"
+GPSD_DEVICES="/dev/gps*"
+
+# Command line options for the gpsd daemon, see 'man gpsd' for details.
+# The most likely options that you might want to set include -b and -n.
+GPSD_OPTIONS=""
+
+# Control socket pathname. It's unlikely you'll want to change this.
+GPSD_SOCKET="/var/run/gpsd.sock"
diff --git a/gis/gpsd/rc.gpsd.new b/gis/gpsd/rc.gpsd.new
new file mode 100644
index 000000000000..0db22b960057
--- /dev/null
+++ b/gis/gpsd/rc.gpsd.new
@@ -0,0 +1,61 @@
+#!/bin/sh
+
+# /etc/rc.d/rc.gpsd
+# Start/stop/restart gpsd
+# Sebastian Arcus and David Spencer
+#
+# To enable automatic discovery of your GPS device by udev, uncomment the
+# appropriate line of /etc/udev/rules.d/97-gpsd.rules
+#
+# Configuration options may be set in /etc/rc.d/rc.gpsd.conf
+# but the defaults will usually be adequate.
+
+gpsd_start() {
+
+ if [ ! -x /lib/udev/gpsd.hotplug ]; then
+ echo "$(basename $0): /lib/udev/gpsd.hotplug not found (or not executable); cannot start."
+ exit 1
+ fi
+
+ if [ -r /etc/rc.d/rc.gpsd.conf ]; then
+ . /etc/rc.d/rc.gpsd.conf
+ fi
+ # Set config defaults in case the .conf file was absent or bogus
+ GPSD_DEVICES="${GPSD_DEVICES:-/dev/gps*}"
+ GPSD_OPTIONS="${GPSD_OPTIONS:-}"
+ GPSD_SOCKET="${GPSD_SOCKET:-/var/run/gpsd.sock}"
+
+ for DEVNAME in $GPSD_DEVICES; do
+ if [ -e $DEVNAME ]; then
+ echo "$(basename $0): Starting gpsd for $DEVNAME"
+ ACTION=add DEVNAME=$DEVNAME /lib/udev/gpsd.hotplug
+ else
+ echo "$(basename $0): $DEVNAME not found, gpsd not started"
+ fi
+ done
+
+}
+
+gpsd_stop() {
+ echo "Stopping gpsd..."
+ killall gpsd >/dev/null 2>&1
+ return 0
+}
+
+case "$1" in
+ start)
+ gpsd_start
+ ;;
+ stop)
+ gpsd_stop
+ ;;
+ restart)
+ gpsd_stop
+ sleep 1
+ gpsd_start
+ ;;
+ *)
+ echo "Usage: $0 start|stop|restart"
+ exit 1
+ ;;
+esac
diff --git a/gis/gpsd/slack-desc b/gis/gpsd/slack-desc
new file mode 100644
index 000000000000..fe1267ea8917
--- /dev/null
+++ b/gis/gpsd/slack-desc
@@ -0,0 +1,19 @@
+# HOW TO EDIT THIS FILE:
+# The "handy ruler" below makes it easier to edit a package description.
+# Line up the first '|' above the ':' following the base package name, and
+# the '|' on the right side marks the last column you can put a character in.
+# You must make exactly 11 lines for the formatting to be correct. It's also
+# customary to leave one space after the ':' except on otherwise blank lines.
+
+ |-----handy-ruler------------------------------------------------------|
+gpsd: gpsd (GPS service daemon)
+gpsd:
+gpsd: gpsd is a service daemon that monitors one or more GPSes attached to
+gpsd: a host computer through serial or USB ports, making all data on the
+gpsd: location/course/velocity available to be queried on TCP port 2947
+gpsd: of the host computer. With gpsd, multiple GPS client applications
+gpsd: (such as navigational and wardriving software) can share access to
+gpsd: GPSes without contention or loss of data.
+gpsd:
+gpsd: Homepage: http://gpsd.berlios.de/
+gpsd:
diff --git a/gis/gpsd/xgps.desktop b/gis/gpsd/xgps.desktop
new file mode 100644
index 000000000000..dc61b1264ba1
--- /dev/null
+++ b/gis/gpsd/xgps.desktop
@@ -0,0 +1,9 @@
+[Desktop Entry]
+Name=xgps
+GenericName=GPS information
+Comment=Display GPS information from a gpsd daemon
+Exec=xgps
+Icon=/usr/share/pixmaps/gpsd-logo.png
+Terminal=false
+Type=Application
+Categories=Utility;
diff --git a/gis/gpsd/xgpsspeed.desktop b/gis/gpsd/xgpsspeed.desktop
new file mode 100644
index 000000000000..c327074411ad
--- /dev/null
+++ b/gis/gpsd/xgpsspeed.desktop
@@ -0,0 +1,9 @@
+[Desktop Entry]
+Name=xgpsspeed
+GenericName=GPS speedometer
+Comment=Display GPS speed from a gpsd daemon
+Exec=xgpsspeed
+Icon=/usr/share/pixmaps/gpsd-logo.png
+Terminal=false
+Type=Application
+Categories=Utility;
generated by cgit v1.2.3 (git 2.26.2) at 2024-11-26 16:41:24 +0000