diff options
Diffstat (limited to 'development/nexus')
| -rw-r--r-- | development/nexus/files/nexus.properties | 14 | ||||
| -rw-r--r-- | development/nexus/files/rc.nexus | 517 | ||||
| -rw-r--r-- | development/nexus/files/wrapper.conf | 157 | ||||
| -rw-r--r-- | development/nexus/nexus.SlackBuild | 31 | ||||
| -rw-r--r-- | development/nexus/nexus.info | 6 |
5 files changed, 19 insertions, 706 deletions
diff --git a/development/nexus/files/nexus.properties b/development/nexus/files/nexus.properties deleted file mode 100644 index 49dcebef1a2b7..0000000000000 --- a/development/nexus/files/nexus.properties +++ /dev/null @@ -1,14 +0,0 @@ -# Sonatype Nexus -# ============== -# This is the most basic configuration of Nexus. - -# Jetty section -application-port=8081 -application-host=0.0.0.0 -nexus-webapp=${bundleBasedir}/nexus -nexus-webapp-context-path=/nexus - -# Nexus section -nexus-work=/var/lib/nexus -runtime=${bundleBasedir}/nexus/WEB-INF - diff --git a/development/nexus/files/rc.nexus b/development/nexus/files/rc.nexus deleted file mode 100644 index 5eb81d8feb181..0000000000000 --- a/development/nexus/files/rc.nexus +++ /dev/null @@ -1,517 +0,0 @@ -#! /bin/sh - -# -# Copyright (c) 1999, 2006 Tanuki Software Inc. -# -# Java Service Wrapper sh script. Suitable for starting and stopping -# wrapped Java applications on UNIX platforms. -# - -#----------------------------------------------------------------------------- -# These settings can be modified to fit the needs of your application - -# If specified, the Wrapper will be run as the specified user. - -# IMPORTANT - Make sure that the user has the required privileges to write into the Nexus installation directory. - -# NOTE - This will set the user which is used to run the Wrapper as well as -# the JVM and is not useful in situations where a privileged resource or -# port needs to be allocated prior to the user being changed. -RUN_AS_USER=nexus - -# Application -APP_NAME="nexus" -APP_LONG_NAME="Nexus OSS" - -# Wrapper -WRAPPER_CMD="/usr/share/nexus/bin/jsw/@NEXUS_ARCH@/wrapper" -WRAPPER_CONF="/usr/share/nexus/bin/jsw/conf/wrapper.conf" - -# Priority at which to run the wrapper. See "man nice" for valid priorities. -# nice is only used if a priority is specified. -PRIORITY= - -# Location of the pid file. -PIDDIR="/var/run/nexus" - -# If uncommented, causes the Wrapper to be shutdown using an anchor file. -# When launched with the 'start' command, it will also ignore all INT and -# TERM signals. -#IGNORE_SIGNALS=true - -# The following two lines are used by the chkconfig command. Change as is -# appropriate for your application. They should remain commented. -# chkconfig: 2345 20 80 -# description: Test Wrapper Sample Application - -# Do not modify anything beyond this point -#----------------------------------------------------------------------------- - -# Get the fully qualified path to the script -case $0 in - /*) - SCRIPT="$0" - ;; - *) - PWD=`pwd` - SCRIPT="$PWD/$0" - ;; -esac - -# Resolve the true real path without any sym links. -CHANGED=true -while [ "X$CHANGED" != "X" ] -do - # Change spaces to ":" so the tokens can be parsed. - SAFESCRIPT=`echo $SCRIPT | sed -e 's; ;:;g'` - # Get the real path to this script, resolving any symbolic links - TOKENS=`echo $SAFESCRIPT | sed -e 's;/; ;g'` - REALPATH= - for C in $TOKENS; do - # Change any ":" in the token back to a space. - C=`echo $C | sed -e 's;:; ;g'` - REALPATH="$REALPATH/$C" - # If REALPATH is a sym link, resolve it. Loop for nested links. - while [ -h "$REALPATH" ] ; do - LS="`ls -ld "$REALPATH"`" - LINK="`expr "$LS" : '.*-> \(.*\)$'`" - if expr "$LINK" : '/.*' > /dev/null; then - # LINK is absolute. - REALPATH="$LINK" - else - # LINK is relative. - REALPATH="`dirname "$REALPATH"`""/$LINK" - fi - done - done - - if [ "$REALPATH" = "$SCRIPT" ] - then - CHANGED="" - else - SCRIPT="$REALPATH" - fi -done - -# Change the current directory to the location of the script -cd "`dirname "$REALPATH"`" -REALDIR=`pwd` - -# Resolve the location of the 'ps' command -PSEXE="/usr/bin/ps" -if [ ! -x "$PSEXE" ] -then - PSEXE="/bin/ps" - if [ ! -x "$PSEXE" ] - then - echo "Unable to locate 'ps'." - echo "Please report this message along with the location of the command on your system." - exit 1 - fi -fi - -# Resolve the os -DIST_OS=`uname -s | tr [:upper:] [:lower:] | tr -d [:blank:]` -case "$DIST_OS" in - 'sunos') - DIST_OS="solaris" - ;; - 'hp-ux' | 'hp-ux64') - DIST_OS="hpux" - ;; - 'darwin') - DIST_OS="macosx" - ;; - 'unix_sv') - DIST_OS="unixware" - ;; -esac - -# Resolve the architecture -DIST_ARCH=`uname -p | tr [:upper:] [:lower:] | tr -d [:blank:]` -if [ "$DIST_ARCH" = "unknown" ] -then - DIST_ARCH=`uname -m | tr [:upper:] [:lower:] | tr -d [:blank:]` -fi -case "$DIST_ARCH" in - 'amd64' | 'athlon' | 'ia32' | 'ia64' | 'i386' | 'i486' | 'i586' | 'i686' | 'x86_64') - DIST_ARCH="x86" - ;; - 'ip27') - DIST_ARCH="mips" - ;; - 'power' | 'powerpc' | 'power_pc' | 'ppc64') - DIST_ARCH="ppc" - ;; - 'pa_risc' | 'pa-risc') - DIST_ARCH="parisc" - ;; - 'sun4u' | 'sparcv9') - DIST_ARCH="sparc" - ;; - '9000/800') - DIST_ARCH="parisc" - ;; -esac - -outputFile() { - if [ -f "$1" ] - then - echo " $1 (Found but not executable.)"; - else - echo " $1" - fi -} - -# Default PIDDIR to current directory -if [ "X$PIDDIR" = "X" ] -then - PIDDIR="." -fi - -# If the PIDDIR is relative, set its value relative to the full REALPATH to avoid problems if -# the working directory is later changed. -FIRST_CHAR=`echo $PIDDIR | cut -c1,1` -if [ "$FIRST_CHAR" != "/" ] -then - PIDDIR=$REALDIR/$PIDDIR -fi -# Same test for WRAPPER_CMD -FIRST_CHAR=`echo $WRAPPER_CMD | cut -c1,1` -if [ "$FIRST_CHAR" != "/" ] -then - WRAPPER_CMD=$REALDIR/$WRAPPER_CMD -fi -# Same test for WRAPPER_CONF -FIRST_CHAR=`echo $WRAPPER_CONF | cut -c1,1` -if [ "$FIRST_CHAR" != "/" ] -then - WRAPPER_CONF=$REALDIR/$WRAPPER_CONF -fi - -# Process ID -ANCHORFILE="$PIDDIR/$APP_NAME.anchor" -PIDFILE="$PIDDIR/$APP_NAME.pid" -LOCKDIR="/var/lock/subsys" -LOCKFILE="$LOCKDIR/$APP_NAME" -pid="" - -if [ ! -x "$WRAPPER_CMD" ]; then - echo "Missing platform binary: $WRAPPER_CMD" - exit 1 -fi - -# Build the nice clause -if [ "X$PRIORITY" = "X" ] -then - CMDNICE="" -else - CMDNICE="nice -$PRIORITY" -fi - -# Build the anchor file clause. -if [ "X$IGNORE_SIGNALS" = "X" ] -then - ANCHORPROP= - IGNOREPROP= -else - ANCHORPROP=wrapper.anchorfile=\"$ANCHORFILE\" - IGNOREPROP=wrapper.ignore_signals=TRUE -fi - -# Build the lock file clause. Only create a lock file if the lock directory exists on this platform. -LOCKPROP= -if [ -d $LOCKDIR ] -then - if [ -w $LOCKDIR ] - then - LOCKPROP=wrapper.lockfile=\"$LOCKFILE\" - fi -fi - -checkUser() { - # $1 touchLock flag - # $2 command - - # Resolve the location of the 'id' command - IDEXE="/usr/xpg4/bin/id" - if [ ! -x "$IDEXE" ] - then - IDEXE="/usr/bin/id" - if [ ! -x "$IDEXE" ] - then - echo "Unable to locate 'id'." - echo "Please report this message along with the location of the command on your system." - exit 1 - fi - fi - - # Check the configured user. If necessary rerun this script as the desired user. - if [ "X$RUN_AS_USER" != "X" ] - then - if [ "`$IDEXE -u -n`" != "$RUN_AS_USER" ] - then - # If LOCKPROP and $RUN_AS_USER are defined then the new user will most likely not be - # able to create the lock file. The Wrapper will be able to update this file once it - # is created but will not be able to delete it on shutdown. If $2 is defined then - # the lock file should be created for the current command - if [ "X$LOCKPROP" != "X" ] - then - if [ "X$1" != "X" ] - then - # Resolve the primary group - RUN_AS_GROUP=`groups $RUN_AS_USER | awk '{print $3}' | tail -1` - if [ "X$RUN_AS_GROUP" = "X" ] - then - RUN_AS_GROUP=$RUN_AS_USER - fi - touch $LOCKFILE - chown $RUN_AS_USER:$RUN_AS_GROUP $LOCKFILE - fi - fi - - # Still want to change users, recurse. This means that the user will only be - # prompted for a password once. Variables shifted by 1 - su -m $RUN_AS_USER -c "\"$REALPATH\" $2" - - # Now that we are the original user again, we may need to clean up the lock file. - if [ "X$LOCKPROP" != "X" ] - then - getpid - if [ "X$pid" = "X" ] - then - # Wrapper is not running so make sure the lock file is deleted. - if [ -f "$LOCKFILE" ] - then - rm "$LOCKFILE" - fi - fi - fi - - exit 0 - fi - fi - - # Check that script is not run as root - LUID=`$IDEXE -u` - if [ $LUID -eq 0 ] - then - echo "****************************************" - echo "WARNING - NOT RECOMMENDED TO RUN AS ROOT" - echo "****************************************" - if [ ! "`$IDEXE -u -n`" = "$RUN_AS_USER" ] - then - echo "If you insist running as root, then set the environment variable RUN_AS_USER=root before running this script." - exit 1 - fi - fi -} - -getpid() { - if [ -f "$PIDFILE" ] - then - if [ -r "$PIDFILE" ] - then - pid=`cat "$PIDFILE"` - if [ "X$pid" != "X" ] - then - # It is possible that 'a' process with the pid exists but that it is not the - # correct process. This can happen in a number of cases, but the most - # common is during system startup after an unclean shutdown. - # The ps statement below looks for the specific wrapper command running as - # the pid. If it is not found then the pid file is considered to be stale. - pidtest=`$PSEXE -p $pid -o args | grep "wrapper.pidfile" | tail -1` - if [ "X$pidtest" = "X" ] - then - # This is a stale pid file. - rm -f "$PIDFILE" - echo "Removed stale pid file: $PIDFILE" - pid="" - fi - fi - else - echo "Cannot read $PIDFILE." - exit 1 - fi - fi -} - -testpid() { - pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1` - if [ "X$pid" = "X" ] - then - # Process is gone so remove the pid file. - rm -f "$PIDFILE" - pid="" - fi -} - -console() { - echo "Running $APP_LONG_NAME..." - getpid - if [ "X$pid" = "X" ] - then - # The string passed to eval must handles spaces in paths correctly. - COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" $ANCHORPROP $LOCKPROP" - eval $COMMAND_LINE - else - echo "$APP_LONG_NAME is already running." - exit 1 - fi -} - -start() { - echo "Starting $APP_LONG_NAME..." - getpid - if [ "X$pid" = "X" ] - then - # The string passed to eval must handles spaces in paths correctly. - COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $LOCKPROP" - eval $COMMAND_LINE - else - echo "$APP_LONG_NAME is already running." - exit 1 - fi - getpid - if [ "X$pid" != "X" ] - then - echo "Started $APP_LONG_NAME." - else - echo "Failed to start $APP_LONG_NAME." - fi -} - -stopit() { - echo "Stopping $APP_LONG_NAME..." - getpid - if [ "X$pid" = "X" ] - then - echo "$APP_LONG_NAME was not running." - else - if [ "X$IGNORE_SIGNALS" = "X" ] - then - # Running so try to stop it. - kill $pid - if [ $? -ne 0 ] - then - # An explanation for the failure should have been given - echo "Unable to stop $APP_LONG_NAME." - exit 1 - fi - else - rm -f "$ANCHORFILE" - if [ -f "$ANCHORFILE" ] - then - # An explanation for the failure should have been given - echo "Unable to stop $APP_LONG_NAME." - exit 1 - fi - fi - - # We can not predict how long it will take for the wrapper to - # actually stop as it depends on settings in wrapper.conf. - # Loop until it does. - savepid=$pid - CNT=0 - TOTCNT=0 - while [ "X$pid" != "X" ] - do - # Show a waiting message every 5 seconds. - if [ "$CNT" -lt "5" ] - then - CNT=`expr $CNT + 1` - else - echo "Waiting for $APP_LONG_NAME to exit..." - CNT=0 - fi - TOTCNT=`expr $TOTCNT + 1` - - sleep 1 - - testpid - done - - pid=$savepid - testpid - if [ "X$pid" != "X" ] - then - echo "Failed to stop $APP_LONG_NAME." - exit 1 - else - echo "Stopped $APP_LONG_NAME." - fi - fi -} - -status() { - getpid - if [ "X$pid" = "X" ] - then - echo "$APP_LONG_NAME is not running." - exit 1 - else - echo "$APP_LONG_NAME is running ($pid)." - exit 0 - fi -} - -dump() { - echo "Dumping $APP_LONG_NAME..." - getpid - if [ "X$pid" = "X" ] - then - echo "$APP_LONG_NAME was not running." - - else - kill -3 $pid - - if [ $? -ne 0 ] - then - echo "Failed to dump $APP_LONG_NAME." - exit 1 - else - echo "Dumped $APP_LONG_NAME." - fi - fi -} - -case "$1" in - - 'console') - checkUser touchlock $1 - console - ;; - - 'start') - checkUser touchlock $1 - start - ;; - - 'stop') - checkUser "" $1 - stopit - ;; - - 'restart') - checkUser touchlock $1 - stopit - start - ;; - - 'status') - checkUser "" $1 - status - ;; - - 'dump') - checkUser "" $1 - dump - ;; - - *) - echo "Usage: $0 { console | start | stop | restart | status | dump }" - exit 1 - ;; -esac - -exit 0 diff --git a/development/nexus/files/wrapper.conf b/development/nexus/files/wrapper.conf deleted file mode 100644 index 2fe62598a6c43..0000000000000 --- a/development/nexus/files/wrapper.conf +++ /dev/null @@ -1,157 +0,0 @@ -# JSW Configuration file -# -# For complete coverage of available configuration, please go here: -# http://wrapper.tanukisoftware.org/doc/english/properties.html -# -# Some "most often used" keywords are added to end of this file -# to be used as a "guideline". They are NOT the complete list of -# keywords. - -# Set the JSW working directory (used as base for resolving relative paths) -wrapper.working.dir=/usr/share/nexus - -# Set the JVM executable -# (modify this to absolute path if you need a Java that is not on the OS path) -wrapper.java.command=%JAVA_HOME%/bin/java - -# The main class that JSW will execute within JVM -wrapper.java.mainclass=org.codehaus.plexus.classworlds.launcher.Launcher - -# The JVM classpath -wrapper.java.classpath.1=bin/jsw/lib/wrapper-3.2.3.jar -wrapper.java.classpath.2=./lib/plexus-classworlds-*.jar -wrapper.java.classpath.3=./conf/ - -# The library path -wrapper.java.library.path.1=bin/jsw/lib - -# Additional JVM parameters (tune if needed, but match the sequence of numbers!) -wrapper.java.additional.1=-Dsun.net.inetaddr.ttl=3600 -wrapper.java.additional.2=-DbundleBasedir=. -wrapper.java.additional.3=-Djava.io.tmpdir=./tmp -wrapper.java.additional.4=-DjettyContext=nexus.properties -wrapper.java.additional.5=-DjettyContextIncludeKeys=bundleBasedir -wrapper.java.additional.6=-DjettyPlexusCompatibility=true -#wrapper.java.additional.7=-Xdebug -#wrapper.java.additional.8=-Xnoagent -#wrapper.java.additional.9=-Djava.compiler=NONE -#wrapper.java.additional.10=-Xrunjdwp:transport=dt_socket,server=y,suspend=y,address=8000 -#wrapper.java.additional.11=-XX:+HeapDumpOnOutOfMemoryError - -wrapper.app.parameter.1=./conf/jetty.xml - -# Size Java memory, in MB (-Xms) -#wrapper.java.initmemory=128 -# Size Java memory, in MB (-Xmx) -#wrapper.java.maxmemory=256 - -# How much to wait for JVM to respond to "ping" (increase on slower machines and VMs if needed) -wrapper.ping.timeout=90 -# How much to wait for application to start up (increase on slower machines if needed) -wrapper.startup.timeout=90 - -# Make wrapper reload configuration between app restarts -# and set exit code 12 as "RESTART" command -wrapper.restart.reload_configuration=TRUE -wrapper.on_exit.12=RESTART - -# Set up JSW logging -wrapper.logfile=logs/wrapper.log -wrapper.logfile.format=PM -wrapper.logfile.loglevel=INFO -wrapper.logfile.maxsize=10m -wrapper.logfile.maxfiles=10 - -# Set up system logging (if needed, change to INFO or other valid values) -wrapper.syslog.loglevel=NONE - -# Set up JSW Console -wrapper.console.title=Nexus OSS -wrapper.console.format=PM -wrapper.console.loglevel=INFO -wrapper.console.flush=true - -# ============================================= -# An example wrapper.conf file is included -# below for quick reference -# ============================================= - -# ******************************************************************** -# Wrapper Java Properties -# ******************************************************************** -# Java Application -#wrapper.java.command=java - -# Tell the Wrapper to log the full generated Java command line. -#wrapper.java.command.loglevel=INFO - -# Java Main class. This class must implement the WrapperListener interface -# or guarantee that the WrapperManager class is initialized. Helper -# classes are provided to do this for you. See the Integration section -# of the documentation for details. -#wrapper.java.mainclass=org.tanukisoftware.wrapper.WrapperSimpleApp - -# Java Classpath (include wrapper.jar) Add class path elements as -# needed starting from 1 -#wrapper.java.classpath.1=../lib/wrapper.jar - -# Java Library Path (location of Wrapper.DLL or libwrapper.so) -#wrapper.java.library.path.1=../lib - -# Java Bits. On applicable platforms, tells the JVM to run in 32 or 64-bit mode. -#wrapper.java.additional.auto_bits=TRUE - -# Java Additional Parameters -#wrapper.java.additional.1= - -# Initial Java Heap Size (in MB) -#wrapper.java.initmemory=3 - -# Maximum Java Heap Size (in MB) -#wrapper.java.maxmemory=64 - -# Application parameters. Add parameters as needed starting from 1 -#wrapper.app.parameter.1=<YourMainClass> - -# ******************************************************************** -# Wrapper Logging Properties -# ******************************************************************** -# Enables Debug output from the Wrapper. -#wrapper.debug=TRUE - -# Format of output for the console. (See docs for formats) -#wrapper.console.format=PM - -# Log Level for console output. (See docs for log levels) -#wrapper.console.loglevel=INFO - -# Log file to use for wrapper output logging. -#wrapper.logfile=../logs/wrapper.log - -# Format of output for the log file. (See docs for formats) -#wrapper.logfile.format=LPTM - -# Log Level for log file output. (See docs for log levels) -#wrapper.logfile.loglevel=INFO - -# Maximum size that the log file will be allowed to grow to before -# the log is rolled. Size is specified in bytes. The default value -# of 0, disables log rolling. May abbreviate with the 'k' (kb) or -# 'm' (mb) suffix. For example: 10m = 10 megabytes. -#wrapper.logfile.maxsize=0 - -# Maximum number of rolled log files which will be allowed before old -# files are deleted. The default value of 0 implies no limit. -#wrapper.logfile.maxfiles=0 - -# Log Level for sys/event log output. (See docs for log levels) -#wrapper.syslog.loglevel=NONE - -# ******************************************************************** -# Wrapper General Properties -# ******************************************************************** -# Allow for the use of non-contiguous numbered properties -#wrapper.ignore_sequence_gaps=TRUE - -# Title to use when running as a console -#wrapper.console.title=@app.long.name@ diff --git a/development/nexus/nexus.SlackBuild b/development/nexus/nexus.SlackBuild index e49a3c17aa1ca..44687b4b1bf6b 100644 --- a/development/nexus/nexus.SlackBuild +++ b/development/nexus/nexus.SlackBuild @@ -2,7 +2,7 @@ # Slackware build script for Sonatype Nexus -# Copyright 2012 Giorgio Peron Campodarsego, PD, Italy giorgio.peron@gmail.com +# Copyright 2013 Giorgio Peron Campodarsego, PD, Italy giorgio.peron@gmail.com # All rights reserved. # # Redistribution and use of this script, with or without modification, is @@ -23,7 +23,7 @@ # ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. PRGNAM=nexus -VERSION=${VERSION:-2.0} +VERSION=${VERSION:-2.5.0-04} BUILD=${BUILD:-1} TAG=${TAG:-_SBo} @@ -101,23 +101,24 @@ ln -sf ../../../var/tmp/$PRGNAM tmp ln -sf ../../../var/log/$PRGNAM logs cd - cd $PKG/usr/share/$PRGNAM/bin/jsw - ln -sf ../../../../../etc/nexus conf + ln -sf ../../../../../etc/$PRGNAM conf cd - -#Put startup script in place and set correct location -cat $CWD/files/rc.$PRGNAM | \ - sed -e "s/@NEXUS_ARCH@/$NEXUS_ARCH/g" \ - -e "s/@LIBDIRSUFFIX@/$LIBDIRSUFFIX/g" \ - > $PKG/etc/rc.d/rc.$PRGNAM.new - -#Replace two configuration files -rm $PKG/etc/nexus/nexus.properties -cat $CWD/files/nexus.properties > $PKG/etc/nexus/nexus.properties.new -rm $PKG/etc/nexus/wrapper.conf -cat $CWD/files/wrapper.conf > $PKG/etc/nexus/wrapper.conf.new +# Rename to rc.nexus +mv $PKG/usr/share/$PRGNAM/bin/$PRGNAM $PKG/etc/rc.d/rc.$PRGNAM.new +# Fix configuration files +sed -i "s:NEXUS_HOME=\"..\":NEXUS_HOME=\"/usr/share/$PRGNAM\":g" $PKG/etc/rc.d/rc.$PRGNAM.new +sed -i "s:#RUN_AS_USER=:RUN_AS_USER=nexus:g" $PKG/etc/rc.d/rc.$PRGNAM.new +sed -i "s:#PIDDIR=\".\":PIDDIR=\"/var/run/$PRGNAM\":g" $PKG/etc/rc.d/rc.$PRGNAM.new +sed -i "s:DIST_ARCH=\`uname -p:DIST_ARCH=\`uname -m:g" $PKG/etc/rc.d/rc.$PRGNAM.new +sed -i "s:nexus-work=\${bundleBasedir}/../sonatype-work/nexus:nexus-work=/var/lib/$PRGNAM:g" $PKG/etc/$PRGNAM/$PRGNAM.properties +sed -i "s:wrapper.working.dir=../../..:wrapper.working.dir=/usr/share/$PRGNAM:g" $PKG/etc/$PRGNAM/wrapper.conf +sed -i "s:wrapper.java.command=java:wrapper.java.command=/usr/lib$LIBDIRSUFFIX/java/bin/java:g" $PKG/etc/$PRGNAM/wrapper.conf +mv $PKG/etc/$PRGNAM/$PRGNAM.properties $PKG/etc/$PRGNAM/$PRGNAM.properties.new +mv $PKG/etc/$PRGNAM/wrapper.conf $PKG/etc/$PRGNAM/wrapper.conf.new #Fix ownership of some dirs -chown -R nexus:nexus $PKG/var/{lib,log,run,tmp}/nexus +chown -R nexus:nexus $PKG/var/{lib,log,run,tmp}/$PRGNAM mkdir -p $PKG/install cat $CWD/slack-desc > $PKG/install/slack-desc diff --git a/development/nexus/nexus.info b/development/nexus/nexus.info index 588d49b79307d..d9b25d013ba3b 100644 --- a/development/nexus/nexus.info +++ b/development/nexus/nexus.info @@ -1,8 +1,8 @@ PRGNAM="nexus" -VERSION="2.0" +VERSION="2.5.0-04" HOMEPAGE="http://nexus.sonatype.org" -DOWNLOAD="http://www.sonatype.org/downloads/nexus-2.0-bundle.tar.gz" -MD5SUM="e63dc8a99d75d2afdcbf51d86ba74745" +DOWNLOAD="http://www.sonatype.org/downloads/nexus-2.5.0-04-bundle.tar.gz" +MD5SUM="9ba35b7b72c2e2eff87298b4c1e77a9a" DOWNLOAD_x86_64="" MD5SUM_x86_64="" REQUIRES="jdk" |