diff options
Diffstat (limited to 'development/nexus/files/rc.nexus')
| -rw-r--r-- | development/nexus/files/rc.nexus | 517 |
1 files changed, 517 insertions, 0 deletions
diff --git a/development/nexus/files/rc.nexus b/development/nexus/files/rc.nexus new file mode 100644 index 0000000000000..5eb81d8feb181 --- /dev/null +++ b/development/nexus/files/rc.nexus @@ -0,0 +1,517 @@ +#! /bin/sh + +# +# Copyright (c) 1999, 2006 Tanuki Software Inc. +# +# Java Service Wrapper sh script. Suitable for starting and stopping +# wrapped Java applications on UNIX platforms. +# + +#----------------------------------------------------------------------------- +# These settings can be modified to fit the needs of your application + +# If specified, the Wrapper will be run as the specified user. + +# IMPORTANT - Make sure that the user has the required privileges to write into the Nexus installation directory. + +# NOTE - This will set the user which is used to run the Wrapper as well as +# the JVM and is not useful in situations where a privileged resource or +# port needs to be allocated prior to the user being changed. +RUN_AS_USER=nexus + +# Application +APP_NAME="nexus" +APP_LONG_NAME="Nexus OSS" + +# Wrapper +WRAPPER_CMD="/usr/share/nexus/bin/jsw/@NEXUS_ARCH@/wrapper" +WRAPPER_CONF="/usr/share/nexus/bin/jsw/conf/wrapper.conf" + +# Priority at which to run the wrapper. See "man nice" for valid priorities. +# nice is only used if a priority is specified. +PRIORITY= + +# Location of the pid file. +PIDDIR="/var/run/nexus" + +# If uncommented, causes the Wrapper to be shutdown using an anchor file. +# When launched with the 'start' command, it will also ignore all INT and +# TERM signals. +#IGNORE_SIGNALS=true + +# The following two lines are used by the chkconfig command. Change as is +# appropriate for your application. They should remain commented. +# chkconfig: 2345 20 80 +# description: Test Wrapper Sample Application + +# Do not modify anything beyond this point +#----------------------------------------------------------------------------- + +# Get the fully qualified path to the script +case $0 in + /*) + SCRIPT="$0" + ;; + *) + PWD=`pwd` + SCRIPT="$PWD/$0" + ;; +esac + +# Resolve the true real path without any sym links. +CHANGED=true +while [ "X$CHANGED" != "X" ] +do + # Change spaces to ":" so the tokens can be parsed. + SAFESCRIPT=`echo $SCRIPT | sed -e 's; ;:;g'` + # Get the real path to this script, resolving any symbolic links + TOKENS=`echo $SAFESCRIPT | sed -e 's;/; ;g'` + REALPATH= + for C in $TOKENS; do + # Change any ":" in the token back to a space. + C=`echo $C | sed -e 's;:; ;g'` + REALPATH="$REALPATH/$C" + # If REALPATH is a sym link, resolve it. Loop for nested links. + while [ -h "$REALPATH" ] ; do + LS="`ls -ld "$REALPATH"`" + LINK="`expr "$LS" : '.*-> \(.*\)$'`" + if expr "$LINK" : '/.*' > /dev/null; then + # LINK is absolute. + REALPATH="$LINK" + else + # LINK is relative. + REALPATH="`dirname "$REALPATH"`""/$LINK" + fi + done + done + + if [ "$REALPATH" = "$SCRIPT" ] + then + CHANGED="" + else + SCRIPT="$REALPATH" + fi +done + +# Change the current directory to the location of the script +cd "`dirname "$REALPATH"`" +REALDIR=`pwd` + +# Resolve the location of the 'ps' command +PSEXE="/usr/bin/ps" +if [ ! -x "$PSEXE" ] +then + PSEXE="/bin/ps" + if [ ! -x "$PSEXE" ] + then + echo "Unable to locate 'ps'." + echo "Please report this message along with the location of the command on your system." + exit 1 + fi +fi + +# Resolve the os +DIST_OS=`uname -s | tr [:upper:] [:lower:] | tr -d [:blank:]` +case "$DIST_OS" in + 'sunos') + DIST_OS="solaris" + ;; + 'hp-ux' | 'hp-ux64') + DIST_OS="hpux" + ;; + 'darwin') + DIST_OS="macosx" + ;; + 'unix_sv') + DIST_OS="unixware" + ;; +esac + +# Resolve the architecture +DIST_ARCH=`uname -p | tr [:upper:] [:lower:] | tr -d [:blank:]` +if [ "$DIST_ARCH" = "unknown" ] +then + DIST_ARCH=`uname -m | tr [:upper:] [:lower:] | tr -d [:blank:]` +fi +case "$DIST_ARCH" in + 'amd64' | 'athlon' | 'ia32' | 'ia64' | 'i386' | 'i486' | 'i586' | 'i686' | 'x86_64') + DIST_ARCH="x86" + ;; + 'ip27') + DIST_ARCH="mips" + ;; + 'power' | 'powerpc' | 'power_pc' | 'ppc64') + DIST_ARCH="ppc" + ;; + 'pa_risc' | 'pa-risc') + DIST_ARCH="parisc" + ;; + 'sun4u' | 'sparcv9') + DIST_ARCH="sparc" + ;; + '9000/800') + DIST_ARCH="parisc" + ;; +esac + +outputFile() { + if [ -f "$1" ] + then + echo " $1 (Found but not executable.)"; + else + echo " $1" + fi +} + +# Default PIDDIR to current directory +if [ "X$PIDDIR" = "X" ] +then + PIDDIR="." +fi + +# If the PIDDIR is relative, set its value relative to the full REALPATH to avoid problems if +# the working directory is later changed. +FIRST_CHAR=`echo $PIDDIR | cut -c1,1` +if [ "$FIRST_CHAR" != "/" ] +then + PIDDIR=$REALDIR/$PIDDIR +fi +# Same test for WRAPPER_CMD +FIRST_CHAR=`echo $WRAPPER_CMD | cut -c1,1` +if [ "$FIRST_CHAR" != "/" ] +then + WRAPPER_CMD=$REALDIR/$WRAPPER_CMD +fi +# Same test for WRAPPER_CONF +FIRST_CHAR=`echo $WRAPPER_CONF | cut -c1,1` +if [ "$FIRST_CHAR" != "/" ] +then + WRAPPER_CONF=$REALDIR/$WRAPPER_CONF +fi + +# Process ID +ANCHORFILE="$PIDDIR/$APP_NAME.anchor" +PIDFILE="$PIDDIR/$APP_NAME.pid" +LOCKDIR="/var/lock/subsys" +LOCKFILE="$LOCKDIR/$APP_NAME" +pid="" + +if [ ! -x "$WRAPPER_CMD" ]; then + echo "Missing platform binary: $WRAPPER_CMD" + exit 1 +fi + +# Build the nice clause +if [ "X$PRIORITY" = "X" ] +then + CMDNICE="" +else + CMDNICE="nice -$PRIORITY" +fi + +# Build the anchor file clause. +if [ "X$IGNORE_SIGNALS" = "X" ] +then + ANCHORPROP= + IGNOREPROP= +else + ANCHORPROP=wrapper.anchorfile=\"$ANCHORFILE\" + IGNOREPROP=wrapper.ignore_signals=TRUE +fi + +# Build the lock file clause. Only create a lock file if the lock directory exists on this platform. +LOCKPROP= +if [ -d $LOCKDIR ] +then + if [ -w $LOCKDIR ] + then + LOCKPROP=wrapper.lockfile=\"$LOCKFILE\" + fi +fi + +checkUser() { + # $1 touchLock flag + # $2 command + + # Resolve the location of the 'id' command + IDEXE="/usr/xpg4/bin/id" + if [ ! -x "$IDEXE" ] + then + IDEXE="/usr/bin/id" + if [ ! -x "$IDEXE" ] + then + echo "Unable to locate 'id'." + echo "Please report this message along with the location of the command on your system." + exit 1 + fi + fi + + # Check the configured user. If necessary rerun this script as the desired user. + if [ "X$RUN_AS_USER" != "X" ] + then + if [ "`$IDEXE -u -n`" != "$RUN_AS_USER" ] + then + # If LOCKPROP and $RUN_AS_USER are defined then the new user will most likely not be + # able to create the lock file. The Wrapper will be able to update this file once it + # is created but will not be able to delete it on shutdown. If $2 is defined then + # the lock file should be created for the current command + if [ "X$LOCKPROP" != "X" ] + then + if [ "X$1" != "X" ] + then + # Resolve the primary group + RUN_AS_GROUP=`groups $RUN_AS_USER | awk '{print $3}' | tail -1` + if [ "X$RUN_AS_GROUP" = "X" ] + then + RUN_AS_GROUP=$RUN_AS_USER + fi + touch $LOCKFILE + chown $RUN_AS_USER:$RUN_AS_GROUP $LOCKFILE + fi + fi + + # Still want to change users, recurse. This means that the user will only be + # prompted for a password once. Variables shifted by 1 + su -m $RUN_AS_USER -c "\"$REALPATH\" $2" + + # Now that we are the original user again, we may need to clean up the lock file. + if [ "X$LOCKPROP" != "X" ] + then + getpid + if [ "X$pid" = "X" ] + then + # Wrapper is not running so make sure the lock file is deleted. + if [ -f "$LOCKFILE" ] + then + rm "$LOCKFILE" + fi + fi + fi + + exit 0 + fi + fi + + # Check that script is not run as root + LUID=`$IDEXE -u` + if [ $LUID -eq 0 ] + then + echo "****************************************" + echo "WARNING - NOT RECOMMENDED TO RUN AS ROOT" + echo "****************************************" + if [ ! "`$IDEXE -u -n`" = "$RUN_AS_USER" ] + then + echo "If you insist running as root, then set the environment variable RUN_AS_USER=root before running this script." + exit 1 + fi + fi +} + +getpid() { + if [ -f "$PIDFILE" ] + then + if [ -r "$PIDFILE" ] + then + pid=`cat "$PIDFILE"` + if [ "X$pid" != "X" ] + then + # It is possible that 'a' process with the pid exists but that it is not the + # correct process. This can happen in a number of cases, but the most + # common is during system startup after an unclean shutdown. + # The ps statement below looks for the specific wrapper command running as + # the pid. If it is not found then the pid file is considered to be stale. + pidtest=`$PSEXE -p $pid -o args | grep "wrapper.pidfile" | tail -1` + if [ "X$pidtest" = "X" ] + then + # This is a stale pid file. + rm -f "$PIDFILE" + echo "Removed stale pid file: $PIDFILE" + pid="" + fi + fi + else + echo "Cannot read $PIDFILE." + exit 1 + fi + fi +} + +testpid() { + pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1` + if [ "X$pid" = "X" ] + then + # Process is gone so remove the pid file. + rm -f "$PIDFILE" + pid="" + fi +} + +console() { + echo "Running $APP_LONG_NAME..." + getpid + if [ "X$pid" = "X" ] + then + # The string passed to eval must handles spaces in paths correctly. + COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" $ANCHORPROP $LOCKPROP" + eval $COMMAND_LINE + else + echo "$APP_LONG_NAME is already running." + exit 1 + fi +} + +start() { + echo "Starting $APP_LONG_NAME..." + getpid + if [ "X$pid" = "X" ] + then + # The string passed to eval must handles spaces in paths correctly. + COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $LOCKPROP" + eval $COMMAND_LINE + else + echo "$APP_LONG_NAME is already running." + exit 1 + fi + getpid + if [ "X$pid" != "X" ] + then + echo "Started $APP_LONG_NAME." + else + echo "Failed to start $APP_LONG_NAME." + fi +} + +stopit() { + echo "Stopping $APP_LONG_NAME..." + getpid + if [ "X$pid" = "X" ] + then + echo "$APP_LONG_NAME was not running." + else + if [ "X$IGNORE_SIGNALS" = "X" ] + then + # Running so try to stop it. + kill $pid + if [ $? -ne 0 ] + then + # An explanation for the failure should have been given + echo "Unable to stop $APP_LONG_NAME." + exit 1 + fi + else + rm -f "$ANCHORFILE" + if [ -f "$ANCHORFILE" ] + then + # An explanation for the failure should have been given + echo "Unable to stop $APP_LONG_NAME." + exit 1 + fi + fi + + # We can not predict how long it will take for the wrapper to + # actually stop as it depends on settings in wrapper.conf. + # Loop until it does. + savepid=$pid + CNT=0 + TOTCNT=0 + while [ "X$pid" != "X" ] + do + # Show a waiting message every 5 seconds. + if [ "$CNT" -lt "5" ] + then + CNT=`expr $CNT + 1` + else + echo "Waiting for $APP_LONG_NAME to exit..." + CNT=0 + fi + TOTCNT=`expr $TOTCNT + 1` + + sleep 1 + + testpid + done + + pid=$savepid + testpid + if [ "X$pid" != "X" ] + then + echo "Failed to stop $APP_LONG_NAME." + exit 1 + else + echo "Stopped $APP_LONG_NAME." + fi + fi +} + +status() { + getpid + if [ "X$pid" = "X" ] + then + echo "$APP_LONG_NAME is not running." + exit 1 + else + echo "$APP_LONG_NAME is running ($pid)." + exit 0 + fi +} + +dump() { + echo "Dumping $APP_LONG_NAME..." + getpid + if [ "X$pid" = "X" ] + then + echo "$APP_LONG_NAME was not running." + + else + kill -3 $pid + + if [ $? -ne 0 ] + then + echo "Failed to dump $APP_LONG_NAME." + exit 1 + else + echo "Dumped $APP_LONG_NAME." + fi + fi +} + +case "$1" in + + 'console') + checkUser touchlock $1 + console + ;; + + 'start') + checkUser touchlock $1 + start + ;; + + 'stop') + checkUser "" $1 + stopit + ;; + + 'restart') + checkUser touchlock $1 + stopit + start + ;; + + 'status') + checkUser "" $1 + status + ;; + + 'dump') + checkUser "" $1 + dump + ;; + + *) + echo "Usage: $0 { console | start | stop | restart | status | dump }" + exit 1 + ;; +esac + +exit 0 |