diff options
Diffstat (limited to 'desktop')
-rw-r--r-- | desktop/disper/README | 12 | ||||
-rw-r--r-- | desktop/disper/disper.SlackBuild | 94 | ||||
-rw-r--r-- | desktop/disper/disper.info | 10 | ||||
-rw-r--r-- | desktop/disper/slack-desc | 19 |
4 files changed, 135 insertions, 0 deletions
diff --git a/desktop/disper/README b/desktop/disper/README new file mode 100644 index 0000000000000..66a3be0bf2d33 --- /dev/null +++ b/desktop/disper/README @@ -0,0 +1,12 @@ +Disper is an on-the-fly display switch utility. +It is intended to be used just before giving a presentation +with a laptop, when all one wants is that the beamer, which +has just been connected, is able to show whatever you prepared. + +Disper gives you the option to either clone all detected displays, +or extend the desktop to them. Resolutions are automatically +detected. For cloning, the highest common resolution supported by +all displays is chosen; for extending every display device gets +its highest supported resolution. For special setups requiring +more detailed control, one can still use the standard display +configuration utilites. diff --git a/desktop/disper/disper.SlackBuild b/desktop/disper/disper.SlackBuild new file mode 100644 index 0000000000000..de79b442dd5f9 --- /dev/null +++ b/desktop/disper/disper.SlackBuild @@ -0,0 +1,94 @@ +#!/bin/sh + +# Slackware build script for disper + +# Copyright 2015 Markus Hutmacher Germany +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR "AS IS" AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=disper +VERSION=${VERSION:-0.3.1} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i486 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" +else + SLKCFLAGS="-O2" + LIBDIRSUFFIX="" +fi + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +tar xvf $CWD/${PRGNAM}_${VERSION}.tar.gz +mv $PRGNAM ${PRGNAM}-${VERSION} +cd ${TMP}/$PRGNAM-$VERSION +chown -R root:root . +find -L . \ + \( -perm 777 -o -perm 775 -o -perm 750 -o -perm 711 -o -perm 555 \ + -o -perm 511 \) -exec chmod 755 {} \; -o \ + \( -perm 666 -o -perm 664 -o -perm 640 -o -perm 600 -o -perm 444 \ + -o -perm 440 -o -perm 400 \) -exec chmod 644 {} \; + +# We need to change PREFIX from /usr/local to /usr +sed -i 's&usr/local&usr&' Makefile + +make +make install DESTDIR=$PKG + +find $PKG -print0 | xargs -0 file | grep -e "executable" -e "shared object" | grep ELF \ + | cut -f 1 -d : | xargs strip --strip-unneeded 2> /dev/null || true + +mv $PKG/usr/share/man $PKG/usr/man +find $PKG/usr/man -type f -exec gzip -9 {} \; +for i in $( find $PKG/usr/man -type l ) ; do ln -s $( readlink $i ).gz $i.gz ; rm $i ; done + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cp -a README $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/desktop/disper/disper.info b/desktop/disper/disper.info new file mode 100644 index 0000000000000..b34f7bc43fa83 --- /dev/null +++ b/desktop/disper/disper.info @@ -0,0 +1,10 @@ +PRGNAM="disper" +VERSION="0.3.1" +HOMEPAGE="http://willem.engen.nl/projects/disper/" +DOWNLOAD="http://ppa.launchpad.net/disper-dev/ppa/ubuntu/pool/main/d/disper/disper_0.3.1.tar.gz" +MD5SUM="4474f6c98078cfab24f49db744eb1e80" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +REQUIRES="" +MAINTAINER="Markus Hutmacher" +EMAIL="mailing@markhu.de" diff --git a/desktop/disper/slack-desc b/desktop/disper/slack-desc new file mode 100644 index 0000000000000..9d32865602d90 --- /dev/null +++ b/desktop/disper/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. +# Line up the first '|' above the ':' following the base package name, and +# the '|' on the right side marks the last column you can put a character in. +# You must make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +disper: disper (switch utility) +disper: +disper: Disper is an on-the-fly display switch utility. +disper: +disper: It is useful with multiple displays when using a tyling WindowManager +disper: +disper: It is also useful when switching between Laptop and Beamer +disper: +disper: +disper: +disper: |