1 files changed, 40 insertions, 0 deletions
diff --git a/audio/alsa-tools/99-tascam.rules b/audio/alsa-tools/99-tascam.rules
new file mode 100644
index 0000000000000..6d9f2d52ba758
--- /dev/null
+++ b/audio/alsa-tools/99-tascam.rules
@@ -0,0 +1,40 @@
+# udev rules for hotplugging Tascam USB audio devices.
+
+# This file is part of the slackbuilds.org alsa-tools build, released
+# under the WTFPL. See http://sam.zoy.org/wtfpl/ for details.
+
+# The vendor/product IDs were taken from /usr/share/usb.ids. The rules
+# were adapted from http://www.astro.caltech.edu/~mcs/tascam_us122/
+# (no idea who the author is, no name given on the page).
+
+# Tascam's USB Vendor ID is 1604.
+# Each device has two product IDs: first the initial product ID when it's
+# plugged in. Then after the 1st stage firmware is loaded with fxload,
+# the device re-identifies itself with a second product ID... when udev
+# sees this, we want it to load the 2nd stage firmware with usx2yloader.
+
+# Device           Inititial ID   2nd-stage ID
+# Tascam US-122    8006           8007
+# Tascam US-224    8004           8005
+# Tascam US-428    8000           8001
+
+# Note that I haven't tested the 224 or 428 rules, because I don't own
+# either of these devices. If you end up having to modify the rules to
+# make them work, please send me your modified version of this file
+# so I can include it in a future version of my SlackBuild. Of course,
+# you don't *have* to do this (the WTFPL doesn't require it), I'm just
+# asking you nicely :)
+
+# US-122:
+BUS=="usb", ACTION=="add", ATTRS{idProduct}=="8006", ATTRS{idVendor}=="1604", RUN+="/bin/sh -c '/sbin/fxload -D %N -s /usr/share/alsa/firmware/usx2yloader/tascam_loader.ihx -I /usr/share/alsa/firmware/usx2yloader/us122fw.ihx'"
+BUS=="usb", ACTION=="add", ATTRS{idProduct}=="8007", ATTRS{idVendor}=="1604", RUN+="/bin/sh -c '/usr/bin/usx2yloader'"
+
+# US-224:
+BUS=="usb", ACTION=="add", ATTRS{idProduct}=="8004", ATTRS{idVendor}=="1604", RUN+="/bin/sh -c '/sbin/fxload -D %N -s /usr/share/alsa/firmware/usx2yloader/tascam_loader.ihx -I /usr/share/alsa/firmware/usx2yloader/us224fw.ihx'"
+BUS=="usb", ACTION=="add", ATTRS{idProduct}=="8005", ATTRS{idVendor}=="1604", RUN+="/bin/sh -c '/usr/bin/usx2yloader'"
+
+# US-428. Note that we aren't starting the us428control daemon, so
+# the control surfaces won't work as MIDI controls.
+BUS=="usb", ACTION=="add", ATTRS{idProduct}=="8000", ATTRS{idVendor}=="1604", RUN+="/bin/sh -c '/sbin/fxload -D %N -s /usr/share/alsa/firmware/usx2yloader/tascam_loader.ihx -I /usr/share/alsa/firmware/usx2yloader/us428fw.ihx'"
+BUS=="usb", ACTION=="add", ATTRS{idProduct}=="8001", ATTRS{idVendor}=="1604", RUN+="/bin/sh -c '/usr/bin/usx2yloader'"
+