diff options
-rw-r--r-- | misc/iscan-firmware/README | 8 | ||||
-rw-r--r-- | misc/iscan-firmware/README.Slackware | 37 | ||||
-rw-r--r-- | misc/iscan-firmware/doinst.sh | 5 | ||||
-rw-r--r-- | misc/iscan-firmware/iscan-firmware.SlackBuild | 65 | ||||
-rw-r--r-- | misc/iscan-firmware/iscan-firmware.info | 8 | ||||
-rw-r--r-- | misc/iscan-firmware/slack-desc | 19 |
6 files changed, 142 insertions, 0 deletions
diff --git a/misc/iscan-firmware/README b/misc/iscan-firmware/README new file mode 100644 index 0000000000000..f9cd800fe5949 --- /dev/null +++ b/misc/iscan-firmware/README @@ -0,0 +1,8 @@ +This is the firmware files for EPSON USB scanners, +which are required to get them to run with the +sane "snapscan" backend. + +After installing, you will have to read +/usr/doc/iscan-firmware-2.8.0.1/README.Slackware +and follow the instructions inside, or this package +will not work for you. diff --git a/misc/iscan-firmware/README.Slackware b/misc/iscan-firmware/README.Slackware new file mode 100644 index 0000000000000..791874fdb594b --- /dev/null +++ b/misc/iscan-firmware/README.Slackware @@ -0,0 +1,37 @@ +README.Slackware 20071120 +rworkman@slackbuilds.org + +You will need to append the following to the /etc/sane.d/snapscan.conf +file on your system if it's not already there. Note that some (or all) +of these may already be present if this is an upgrade of iscan-firmware +or you've previously had it installed. + +You will have uncomment the entry for your scanner. + + +#-------------- EPSON Image Scan! for Linux Scanner-Firmware -------------- + +# Perfection 2480/2580 PHOTO (esfw41.bin) +#firmware /usr/share/iscan/esfw41.bin + +# Perfection 3170 PHOTO (esfw32.bin) +#firmware /usr/share/iscan/esfw32.bin + +# Perfection 3490/3590 PHOTO (esfw52.bin) +#firmware /usr/share/iscan/esfw52.bin + +# Perfection 4180 PHOTO (esfw43.bin) +#firmware /usr/share/iscan/esfw43.bin + +# Perfection 4490 PHOTO (esfw54.bin) +#firmware /usr/share/iscan/esfw54.bin + +# Perfection V10/V100 PHOTO (esfw66.bin) +#firmware /usr/share/iscan/esfw66.bin + +# Perfection V350 PHOTO (esfw68.bin) +#firmware /usr/share/iscan/esfw68.bin + +# Perfection V200 PHOTO (esfw7A.bin) +#firmware /usr/share/iscan/esfw7A.bin + diff --git a/misc/iscan-firmware/doinst.sh b/misc/iscan-firmware/doinst.sh new file mode 100644 index 0000000000000..ee39ba83e6bef --- /dev/null +++ b/misc/iscan-firmware/doinst.sh @@ -0,0 +1,5 @@ +echo +echo Be sure to read /usr/doc/iscan-firmware-2.8.0.1/README.Slackware +echo for instructions on adding support for loading firmware to your +echo /etc/sane.d/snapscan.conf file. +echo diff --git a/misc/iscan-firmware/iscan-firmware.SlackBuild b/misc/iscan-firmware/iscan-firmware.SlackBuild new file mode 100644 index 0000000000000..b008405782755 --- /dev/null +++ b/misc/iscan-firmware/iscan-firmware.SlackBuild @@ -0,0 +1,65 @@ +#!/bin/sh + +# Slackware build script for iscan-firmware + +# Copyright 2006-2007 Manuel Reimer (Manuel.Reimer@gmx.de) +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ``AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=iscan-firmware +VERSION=2.8.0.1 +RPMBUILD=11 # <-- This is the build number used by OpenSuSE in their RPM +ARCH=${ARCH:-noarch} +BUILD=${BUILD:-2} +TAG=${TAG:-_SBo} +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +set -e + +rm -rf $PKG +mkdir -p $TMP $PKG $OUTPUT +cd $TMP +rm -rf $PRGNAM-$VERSION +mkdir $PRGNAM-$VERSION +cd $PRGNAM-$VERSION +rpm2cpio $CWD/$PRGNAM-$VERSION-$RPMBUILD.noarch.rpm | cpio -imdv +chown -R root:root . +chmod -R u+w,go+r-w,a-s . +cd usr/share + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +# All license files are in the directory of the "iscan-plugin-gt-f520-1.0.0" +# and we only need them once +cp -a doc/packages/iscan-firmware/iscan-plugin-gt-f520-1.0.0/* \ + $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/README.Slackware > $PKG/usr/doc/$PRGNAM-$VERSION/README.Slackware +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/usr/share/iscan +cp -a iscan/* $PKG/usr/share/iscan + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +cat $CWD/doinst.sh > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -l y -c n $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.tgz diff --git a/misc/iscan-firmware/iscan-firmware.info b/misc/iscan-firmware/iscan-firmware.info new file mode 100644 index 0000000000000..d3f51b76e773a --- /dev/null +++ b/misc/iscan-firmware/iscan-firmware.info @@ -0,0 +1,8 @@ +PRGNAM="iscan-firmware" +VERSION="2.8.0.1" +HOMEPAGE="http://www.avasys.jp/english/linux_e/index.html" +DOWNLOAD="http://download.opensuse.org/distribution/10.3/repo/non-oss/suse/noarch/iscan-firmware-2.8.0.1-11.noarch.rpm" +MD5SUM="a6df3bdd35b12cd784b4439fb0b6524c" +MAINTAINER="Manuel Reimer" +EMAIL="Manuel.Reimer@gmx.de" +APPROVED="rworkman" diff --git a/misc/iscan-firmware/slack-desc b/misc/iscan-firmware/slack-desc new file mode 100644 index 0000000000000..2e2924b86cbfe --- /dev/null +++ b/misc/iscan-firmware/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. Line +# up the first '|' above the ':' following the base package name, and the '|' +# on the right side marks the last column you can put a character in. You must +# make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':'. + + |-----handy-ruler------------------------------------------------------| +iscan-firmware: iscan-firmware (firmware files for EPSON USB scanners) +iscan-firmware: +iscan-firmware: This is the firmware files for EPSON USB scanners, which are +iscan-firmware: required to get them to run with the sane "snapscan" backend. +iscan-firmware: +iscan-firmware: After installing, you have to uncomment the line which matches +iscan-firmware: for your scanner in the file "/etc/sane.d/snapscan.conf". +iscan-firmware: +iscan-firmware: +iscan-firmware: +iscan-firmware: |