diff options
| -rw-r--r-- | development/sonarqube/README | 17 | ||||
| -rw-r--r-- | development/sonarqube/doinst.sh | 24 | ||||
| -rw-r--r-- | development/sonarqube/rc.sonarqube | 564 | ||||
| -rw-r--r-- | development/sonarqube/slack-desc | 19 | ||||
| -rw-r--r-- | development/sonarqube/sonarqube.SlackBuild | 121 | ||||
| -rw-r--r-- | development/sonarqube/sonarqube.info | 10 |
6 files changed, 755 insertions, 0 deletions
diff --git a/development/sonarqube/README b/development/sonarqube/README new file mode 100644 index 000000000000..975531b82e73 --- /dev/null +++ b/development/sonarqube/README @@ -0,0 +1,17 @@ +SonarQube software (previously called Sonar) is an open source quality +management platform, dedicated to continuously analyze and measure technical +quality, from project portfolio to method. + +To create the MariaDB SonarQube database run: +CREATE DATABASE sonar CHARACTER SET utf8 COLLATE utf8_general_ci; +CREATE USER 'sonar' IDENTIFIED BY 'sonar'; +GRANT ALL ON sonar.* TO 'sonar'@'%' IDENTIFIED BY 'sonar'; +GRANT ALL ON sonar.* TO 'sonar'@'localhost' IDENTIFIED BY 'sonar'; +FLUSH PRIVILEGES; +Then start the service +/etc/rc.d/rc.sonarqube start +Then point your browser to +http://localhost:9000/sonarqube/ +Then login as: +user: admin +password: admin diff --git a/development/sonarqube/doinst.sh b/development/sonarqube/doinst.sh new file mode 100644 index 000000000000..999f782e38cb --- /dev/null +++ b/development/sonarqube/doinst.sh @@ -0,0 +1,24 @@ +config() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + if [ ! -r $OLD ]; then + mv $NEW $OLD + elif [ "$(cat $OLD | md5sum)" = "$(cat $NEW | md5sum)" ]; then + rm $NEW + fi +} + +preserve_perms() { + NEW="$1" + OLD="$(dirname $NEW)/$(basename $NEW .new)" + if [ -e $OLD ]; then + cp -a $OLD ${NEW}.incoming + cat $NEW > ${NEW}.incoming + mv ${NEW}.incoming $NEW + fi + config $NEW +} + +preserve_perms etc/rc.d/rc.sonarqube.new +config usr/share/sonarqube/conf/sonar.properties.new +config usr/share/sonarqube/conf/wrapper.conf.new diff --git a/development/sonarqube/rc.sonarqube b/development/sonarqube/rc.sonarqube new file mode 100644 index 000000000000..fa31ee7eccd2 --- /dev/null +++ b/development/sonarqube/rc.sonarqube @@ -0,0 +1,564 @@ +#! /bin/sh + +# +# Copyright (c) 1999, 2006 Tanuki Software Inc. +# +# Java Service Wrapper sh script. Suitable for starting and stopping +# wrapped Java applications on UNIX platforms. +# + +#----------------------------------------------------------------------------- +# These settings can be modified to fit the needs of your application + +# Default values for the Application variables, below. +# +# NOTE: The build for specific applications may override this during the resource-copying +# phase, to fill in a concrete name and avoid the use of the defaults specified here. +DEF_APP_NAME="SonarQube" +DEF_APP_LONG_NAME="SonarQube" + +# Application +APP_NAME="${DEF_APP_NAME}" +APP_LONG_NAME="${DEF_APP_LONG_NAME}" + +# Wrapper +WRAPPER_CMD="./wrapper" +WRAPPER_CONF="/etc/sonarqube/wrapper.conf" + +# Priority at which to run the wrapper. See "man nice" for valid priorities. +# nice is only used if a priority is specified. +PRIORITY= + +# Location of the pid file. +PIDDIR="/var/run/sonarqube" + +# If uncommented, causes the Wrapper to be shutdown using an anchor file. +# When launched with the 'start' command, it will also ignore all INT and +# TERM signals. +#IGNORE_SIGNALS=true + +# If specified, the Wrapper will be run as the specified user. +# IMPORTANT - Make sure that the user has the required privileges to write +# the PID file and wrapper.log files. Failure to be able to write the log +# file will cause the Wrapper to exit without any way to write out an error +# message. +# NOTE - This will set the user which is used to run the Wrapper as well as +# the JVM and is not useful in situations where a privileged resource or +# port needs to be allocated prior to the user being changed. +RUN_AS_USER=sonar + +# The following two lines are used by the chkconfig command. Change as is +# appropriate for your application. They should remain commented. +# chkconfig: 2345 20 80 +# description: Test Wrapper Sample Application + +# Do not modify anything beyond this point +#----------------------------------------------------------------------------- + +# Get the fully qualified path to the script +case $0 in + /*) + SCRIPT="$0" + ;; + *) + PWD=`pwd` + SCRIPT="$PWD/$0" + ;; +esac + +# Resolve the true real path without any sym links. +CHANGED=true +while [ "X$CHANGED" != "X" ] +do + # Change spaces to ":" so the tokens can be parsed. + SAFESCRIPT=`echo $SCRIPT | sed -e 's; ;:;g'` + # Get the real path to this script, resolving any symbolic links + TOKENS=`echo $SAFESCRIPT | sed -e 's;/; ;g'` + REALPATH= + for C in $TOKENS; do + # Change any ":" in the token back to a space. + C=`echo $C | sed -e 's;:; ;g'` + REALPATH="$REALPATH/$C" + # If REALPATH is a sym link, resolve it. Loop for nested links. + while [ -h "$REALPATH" ] ; do + LS="`ls -ld "$REALPATH"`" + LINK="`expr "$LS" : '.*-> \(.*\)$'`" + if expr "$LINK" : '/.*' > /dev/null; then + # LINK is absolute. + REALPATH="$LINK" + else + # LINK is relative. + REALPATH="`dirname "$REALPATH"`""/$LINK" + fi + done + done + + if [ "$REALPATH" = "$SCRIPT" ] + then + CHANGED="" + else + SCRIPT="$REALPATH" + fi +done + +# Change the current directory to the location of the script +cd "`dirname "$REALPATH"`" +REALDIR=`pwd` + +# If the PIDDIR is relative, set its value relative to the full REALPATH to avoid problems if +# the working directory is later changed. +FIRST_CHAR=`echo $PIDDIR | cut -c1,1` +if [ "$FIRST_CHAR" != "/" ] +then + PIDDIR=$REALDIR/$PIDDIR +fi +# Same test for WRAPPER_CMD +FIRST_CHAR=`echo $WRAPPER_CMD | cut -c1,1` +if [ "$FIRST_CHAR" != "/" ] +then + WRAPPER_CMD=$REALDIR/$WRAPPER_CMD +fi +# Same test for WRAPPER_CONF +FIRST_CHAR=`echo $WRAPPER_CONF | cut -c1,1` +if [ "$FIRST_CHAR" != "/" ] +then + WRAPPER_CONF=$REALDIR/$WRAPPER_CONF +fi + +# Process ID +ANCHORFILE="$PIDDIR/$APP_NAME.anchor" +PIDFILE="$PIDDIR/$APP_NAME.pid" +LOCKDIR="/var/lock/subsys" +LOCKFILE="$LOCKDIR/$APP_NAME" +pid="" + +# Resolve the location of the 'ps' command +PSEXE="/usr/bin/ps" +if [ ! -x "$PSEXE" ] +then + PSEXE="/bin/ps" + if [ ! -x "$PSEXE" ] + then + echo "Unable to locate 'ps'." + echo "Please report this message along with the location of the command on your system." + exit 1 + fi +fi + +# Resolve the os +DIST_OS=`uname -s | tr [:upper:] [:lower:] | tr -d [:blank:]` +case "$DIST_OS" in + 'sunos') + DIST_OS="solaris" + ;; + 'hp-ux' | 'hp-ux64') + DIST_OS="hpux" + ;; + 'darwin') + DIST_OS="macosx" + ;; + 'unix_sv') + DIST_OS="unixware" + ;; +esac + +# Resolve the architecture +DIST_ARCH=`uname -p | tr [:upper:] [:lower:] | tr -d [:blank:]` +if [ "$DIST_ARCH" = "unknown" ] +then + DIST_ARCH=`uname -m | tr [:upper:] [:lower:] | tr -d [:blank:]` +fi +case "$DIST_ARCH" in + 'amd64' | 'athlon' | 'ia32' | 'ia64' | 'i386' | 'i486' | 'i586' | 'i686' | 'x86_64') + DIST_ARCH="x86" + ;; + 'ip27') + DIST_ARCH="mips" + ;; + 'power' | 'powerpc' | 'power_pc' | 'ppc64') + DIST_ARCH="ppc" + ;; + 'pa_risc' | 'pa-risc') + DIST_ARCH="parisc" + ;; + 'sun4u' | 'sparcv9') + DIST_ARCH="sparc" + ;; + '9000/800') + DIST_ARCH="parisc" + ;; +esac + +outputFile() { + if [ -f "$1" ] + then + echo " $1 (Found but not executable.)"; + else + echo " $1" + fi +} + +# Decide on the wrapper binary to use. +# If a 32-bit wrapper binary exists then it will work on 32 or 64 bit +# platforms, if the 64-bit binary exists then the distribution most +# likely wants to use long names. Otherwise, look for the default. +# For macosx, we also want to look for universal binaries. +WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32" +if [ -x "$WRAPPER_TEST_CMD" ] +then + WRAPPER_CMD="$WRAPPER_TEST_CMD" +else + if [ "$DIST_OS" = "macosx" ] + then + WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-32" + if [ -x "$WRAPPER_TEST_CMD" ] + then + WRAPPER_CMD="$WRAPPER_TEST_CMD" + else + WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64" + if [ -x "$WRAPPER_TEST_CMD" ] + then + WRAPPER_CMD="$WRAPPER_TEST_CMD" + else + WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-universal-64" + if [ -x "$WRAPPER_TEST_CMD" ] + then + WRAPPER_CMD="$WRAPPER_TEST_CMD" + else + if [ ! -x "$WRAPPER_CMD" ] + then + echo "Unable to locate any of the following binaries:" + outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32" + outputFile "$WRAPPER_CMD-$DIST_OS-universal-32" + outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64" + outputFile "$WRAPPER_CMD-$DIST_OS-universal-64" + outputFile "$WRAPPER_CMD" + exit 1 + fi + fi + fi + fi + else + WRAPPER_TEST_CMD="$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64" + if [ -x "$WRAPPER_TEST_CMD" ] + then + WRAPPER_CMD="$WRAPPER_TEST_CMD" + else + if [ ! -x "$WRAPPER_CMD" ] + then + echo "Unable to locate any of the following binaries:" + outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-32" + outputFile "$WRAPPER_CMD-$DIST_OS-$DIST_ARCH-64" + outputFile "$WRAPPER_CMD" + exit 1 + fi + fi + fi +fi + +# Build the nice clause +if [ "X$PRIORITY" = "X" ] +then + CMDNICE="" +else + CMDNICE="nice -$PRIORITY" +fi + +# Build the anchor file clause. +if [ "X$IGNORE_SIGNALS" = "X" ] +then + ANCHORPROP= + IGNOREPROP= +else + ANCHORPROP=wrapper.anchorfile=\"$ANCHORFILE\" + IGNOREPROP=wrapper.ignore_signals=TRUE +fi + +# Build the lock file clause. Only create a lock file if the lock directory exists on this platform. +LOCKPROP= +if [ -d $LOCKDIR ] +then + if [ -w $LOCKDIR ] + then + LOCKPROP=wrapper.lockfile=\"$LOCKFILE\" + fi +fi + +checkUser() { + # $1 touchLock flag + # $2 command + + # Check the configured user. If necessary rerun this script as the desired user. + if [ "X$RUN_AS_USER" != "X" ] + then + # Resolve the location of the 'id' command + IDEXE="/usr/xpg4/bin/id" + if [ ! -x "$IDEXE" ] + then + IDEXE="/usr/bin/id" + if [ ! -x "$IDEXE" ] + then + echo "Unable to locate 'id'." + echo "Please report this message along with the location of the command on your system." + exit 1 + fi + fi + + if [ "`$IDEXE -u -n`" = "$RUN_AS_USER" ] + then + # Already running as the configured user. Avoid password prompts by not calling su. + RUN_AS_USER="" + fi + fi + if [ "X$RUN_AS_USER" != "X" ] + then + # If LOCKPROP and $RUN_AS_USER are defined then the new user will most likely not be + # able to create the lock file. The Wrapper will be able to update this file once it + # is created but will not be able to delete it on shutdown. If $2 is defined then + # the lock file should be created for the current command + if [ "X$LOCKPROP" != "X" ] + then + if [ "X$1" != "X" ] + then + # Resolve the primary group + RUN_AS_GROUP=`groups $RUN_AS_USER | awk '{print $3}' | tail -1` + if [ "X$RUN_AS_GROUP" = "X" ] + then + RUN_AS_GROUP=$RUN_AS_USER + fi + touch $LOCKFILE + chown $RUN_AS_USER:$RUN_AS_GROUP $LOCKFILE + fi + fi + + # Still want to change users, recurse. This means that the user will only be + # prompted for a password once. Variables shifted by 1 + su -m $RUN_AS_USER -c "\"$REALPATH\" $2" + RETVAL=$? + + # Now that we are the original user again, we may need to clean up the lock file. + if [ "X$LOCKPROP" != "X" ] + then + getpid + if [ "X$pid" = "X" ] + then + # Wrapper is not running so make sure the lock file is deleted. + if [ -f "$LOCKFILE" ] + then + rm "$LOCKFILE" + fi + fi + fi + + exit $RETVAL + fi +} + +getpid() { + if [ -f "$PIDFILE" ] + then + if [ -r "$PIDFILE" ] + then + pid=`cat "$PIDFILE"` + if [ "X$pid" != "X" ] + then + # It is possible that 'a' process with the pid exists but that it is not the + # correct process. This can happen in a number of cases, but the most + # common is during system startup after an unclean shutdown. + # The ps statement below looks for the specific wrapper command running as + # the pid. If it is not found then the pid file is considered to be stale. + pidtest=`$PSEXE -p $pid -o args | grep "$WRAPPER_CMD" | tail -1` + if [ "X$pidtest" = "X" ] + then + # This is a stale pid file. + rm -f "$PIDFILE" + echo "Removed stale pid file: $PIDFILE" + pid="" + fi + fi + else + echo "Cannot read $PIDFILE." + exit 1 + fi + fi +} + +testpid() { + pid=`$PSEXE -p $pid | grep $pid | grep -v grep | awk '{print $1}' | tail -1` + if [ "X$pid" = "X" ] + then + # Process is gone so remove the pid file. + rm -f "$PIDFILE" + pid="" + fi +} + +console() { + echo "Running $APP_LONG_NAME..." + getpid + if [ "X$pid" = "X" ] + then + # The string passed to eval must handles spaces in paths correctly. + COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" $ANCHORPROP $LOCKPROP" + eval $COMMAND_LINE + else + echo "$APP_LONG_NAME is already running." + exit 1 + fi +} + +start() { + echo "Starting $APP_LONG_NAME..." + getpid + if [ "X$pid" = "X" ] + then + # The string passed to eval must handles spaces in paths correctly. + COMMAND_LINE="$CMDNICE \"$WRAPPER_CMD\" \"$WRAPPER_CONF\" wrapper.syslog.ident=$APP_NAME wrapper.pidfile=\"$PIDFILE\" wrapper.daemonize=TRUE $ANCHORPROP $IGNOREPROP $LOCKPROP" + eval $COMMAND_LINE + else + echo "$APP_LONG_NAME is already running." + exit 1 + fi + getpid + if [ "X$pid" != "X" ] + then + echo "Started $APP_LONG_NAME." + else + echo "Failed to start $APP_LONG_NAME." + fi +} + +stopit() { + echo "Stopping $APP_LONG_NAME..." + getpid + if [ "X$pid" = "X" ] + then + echo "$APP_LONG_NAME was not running." + else + if [ "X$IGNORE_SIGNALS" = "X" ] + then + # Running so try to stop it. + kill $pid + if [ $? -ne 0 ] + then + # An explanation for the failure should have been given + echo "Unable to stop $APP_LONG_NAME." + exit 1 + fi + else + rm -f "$ANCHORFILE" + if [ -f "$ANCHORFILE" ] + then + # An explanation for the failure should have been given + echo "Unable to stop $APP_LONG_NAME." + exit 1 + fi + fi + + # We can not predict how long it will take for the wrapper to + # actually stop as it depends on settings in wrapper.conf. + # Loop until it does. + savepid=$pid + CNT=0 + TOTCNT=0 + while [ "X$pid" != "X" ] + do + # Show a waiting message every 5 seconds. + if [ "$CNT" -lt "5" ] + then + CNT=`expr $CNT + 1` + else + echo "Waiting for $APP_LONG_NAME to exit..." + CNT=0 + fi + TOTCNT=`expr $TOTCNT + 1` + + sleep 1 + + testpid + done + + pid=$savepid + testpid + if [ "X$pid" != "X" ] + then + echo "Failed to stop $APP_LONG_NAME." + exit 1 + else + echo "Stopped $APP_LONG_NAME." + fi + fi +} + +status() { + getpid + if [ "X$pid" = "X" ] + then + echo "$APP_LONG_NAME is not running." + exit 1 + else + echo "$APP_LONG_NAME is running ($pid)." + exit 0 + fi +} + +dump() { + echo "Dumping $APP_LONG_NAME..." + getpid + if [ "X$pid" = "X" ] + then + echo "$APP_LONG_NAME was not running." + + else + kill -3 $pid + + if [ $? -ne 0 ] + then + echo "Failed to dump $APP_LONG_NAME." + exit 1 + else + echo "Dumped $APP_LONG_NAME." + fi + fi +} + +case "$1" in + + 'console') + checkUser touchlock $1 + console + ;; + + 'start') + checkUser touchlock $1 + start + ;; + + 'stop') + checkUser "" $1 + stopit + ;; + + 'restart') + checkUser touchlock $1 + stopit + start + ;; + + 'status') + checkUser "" $1 + status + ;; + + 'dump') + checkUser "" $1 + dump + ;; + + *) + echo "Usage: $0 { console | start | stop | restart | status | dump }" + exit 1 + ;; +esac + +exit 0 diff --git a/development/sonarqube/slack-desc b/development/sonarqube/slack-desc new file mode 100644 index 000000000000..ffa8efb06a16 --- /dev/null +++ b/development/sonarqube/slack-desc @@ -0,0 +1,19 @@ +# HOW TO EDIT THIS FILE: +# The "handy ruler" below makes it easier to edit a package description. +# Line up the first '|' above the ':' following the base package name, and +# the '|' on the right side marks the last column you can put a character in. +# You must make exactly 11 lines for the formatting to be correct. It's also +# customary to leave one space after the ':' except on otherwise blank lines. + + |-----handy-ruler------------------------------------------------------| +sonarqube: SonarQube (quality management platform) +sonarqube: +sonarqube: SonarQube software (previously called Sonar) is an open source +sonarqube: quality management platform, dedicated to continuously analyze and +sonarqube: measure technical quality, from project portfolio to method. +sonarqube: +sonarqube: +sonarqube: +sonarqube: Homepage: http://www.sonarqube.org/ +sonarqube: +sonarqube: diff --git a/development/sonarqube/sonarqube.SlackBuild b/development/sonarqube/sonarqube.SlackBuild new file mode 100644 index 000000000000..7923e2ae0568 --- /dev/null +++ b/development/sonarqube/sonarqube.SlackBuild @@ -0,0 +1,121 @@ +#!/bin/sh +# Slackware build script for sonarqube + +# Copyright 2014 Giorgio Peron giorgio.peron@gmail.com Campodarsego, PD, Italy +# All rights reserved. +# +# Redistribution and use of this script, with or without modification, is +# permitted provided that the following conditions are met: +# +# 1. Redistributions of this script must retain the above copyright +# notice, this list of conditions and the following disclaimer. +# +# THIS SOFTWARE IS PROVIDED BY THE AUTHOR ''AS IS'' AND ANY EXPRESS OR IMPLIED +# WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF +# MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO +# EVENT SHALL THE AUTHOR BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, +# SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, +# PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; +# OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, +# WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR +# OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF +# ADVISED OF THE POSSIBILITY OF SUCH DAMAGE. + +PRGNAM=sonarqube +VERSION=${VERSION:-4.3.2} +BUILD=${BUILD:-1} +TAG=${TAG:-_SBo} + +bailout() { + printf "\nThis requires a \"sonar\" user and group.\n" + printf "\tgroupadd -g 287 sonar\n" + printf "\tuseradd -g 287 -u 287 -r -c 'SonarQube user' -s /bin/bash -d /usr/share/sonarqube sonar\n\n" + exit 1 +} + +if ! getent group sonar 2>/dev/null 1>/dev/null ; then + bailout +elif ! getent passwd sonar 2>/dev/null 1>/dev/null ; then + bailout +fi + +if [ -z "$ARCH" ]; then + case "$( uname -m )" in + i?86) ARCH=i486 ;; + arm*) ARCH=arm ;; + *) ARCH=$( uname -m ) ;; + esac +fi + +CWD=$(pwd) +TMP=${TMP:-/tmp/SBo} +PKG=$TMP/package-$PRGNAM +OUTPUT=${OUTPUT:-/tmp} + +if [ "$ARCH" = "i486" ]; then + SLKCFLAGS="-O2 -march=i486 -mtune=i686" + LIBDIRSUFFIX="" + BINDIR="linux-x86-32" +elif [ "$ARCH" = "i686" ]; then + SLKCFLAGS="-O2 -march=i686 -mtune=i686" + LIBDIRSUFFIX="" + BINDIR="linux-x86-32" +elif [ "$ARCH" = "x86_64" ]; then + SLKCFLAGS="-O2 -fPIC" + LIBDIRSUFFIX="64" + BINDIR="linux-x86-64" +else + SLKCFLAGS="-O2" + BINDIR="" +fi + +set -e + +rm -rf $PKG $TMP/$PRGNAM-$VERSION +mkdir -p $PKG $OUTPUT +cd $TMP + +unzip $CWD/$PRGNAM-$VERSION.zip + +mkdir -p $PKG/usr/share/$PRGNAM +mkdir -p $PKG/var/{log,run,tmp}/$PRGNAM +mkdir -p $PKG/etc/rc.d + +mv $TMP/$PRGNAM-$VERSION/* $PKG/usr/share/$PRGNAM/ + +# expose the configuration file under /etc +mv $PKG/usr/share/$PRGNAM/conf/sonar.properties{,.new} +mv $PKG/usr/share/$PRGNAM/conf/wrapper.conf{,.new} +cd $PKG/etc +ln -sf ../usr/share/$PRGNAM/conf $PRGNAM + +sed -i "s_sonar.jdbc.url=jdbc:h2:_#sonar.jdbc.url=jdbc:h2:_g" $PKG/usr/share/$PRGNAM/conf/sonar.properties.new +sed -i "s_#sonar.jdbc.url=jdbc:mysql:_sonar.jdbc.url=jdbc:mysql:_g" $PKG/usr/share/$PRGNAM/conf/sonar.properties.new +sed -i "s_#sonar.web.context=_sonar.web.context=/sonarqube_g" $PKG/usr/share/$PRGNAM/conf/sonar.properties.new +sed -i "s_wrapper.java.command=java_wrapper.java.command=/usr/lib${LIBDIRSUFFIX}/java/bin/java_g" $PKG/usr/share/$PRGNAM/conf/wrapper.conf.new + +chown -R sonar:sonar $PKG/usr/share/$PRGNAM +chown -R sonar:sonar $PKG/var/{log,run,tmp}/$PRGNAM + +rm -rf $PKG/usr/share/$PRGNAM/logs +rm -rf $PKG/usr/share/$PRGNAM/temp +cd $PKG/usr/share/$PRGNAM +ln -fs ../../../var/log/$PRGNAM logs +ln -fs ../../../var/tmp/$PRGNAM temp + +# remove the executables for the others platforms +cd $PKG/usr/share/$PRGNAM/bin +find . -type d -not -name ${BINDIR} -not -name "." -not -name "lib" | xargs rm -rf + +cat $CWD/rc.$PRGNAM > $PKG/etc/rc.d/rc.$PRGNAM.new +sed -i "s:WRAPPER_CMD=\"./wrapper\":WRAPPER_CMD=\"/usr/share/sonarqube/bin/${BINDIR}/wrapper\":g" $PKG/etc/rc.d/rc.$PRGNAM.new + +mkdir -p $PKG/usr/doc/$PRGNAM-$VERSION +cat $CWD/$PRGNAM.SlackBuild > $PKG/usr/doc/$PRGNAM-$VERSION/$PRGNAM.SlackBuild + +mkdir -p $PKG/install +cat $CWD/slack-desc > $PKG/install/slack-desc +cat $CWD/doinst.sh > $PKG/install/doinst.sh + +cd $PKG +/sbin/makepkg -c n -l y $OUTPUT/$PRGNAM-$VERSION-$ARCH-$BUILD$TAG.${PKGTYPE:-tgz} diff --git a/development/sonarqube/sonarqube.info b/development/sonarqube/sonarqube.info new file mode 100644 index 000000000000..48940a20ab25 --- /dev/null +++ b/development/sonarqube/sonarqube.info @@ -0,0 +1,10 @@ +PRGNAM="sonarqube" +VERSION="4.3.2" +HOMEPAGE="http://www.sonarqube.org" +DOWNLOAD="http://dist.sonar.codehaus.org/sonarqube-4.3.2.zip" +MD5SUM="2085e8ce11e0c941dc4451ec808c4169" +DOWNLOAD_x86_64="" +MD5SUM_x86_64="" +REQUIRES="jdk" +MAINTAINER="Giorgio Peron" +EMAIL="giorgio.peron@gmail.com" |